RECENT REFEREED JOURNAL PUBLICATIONS
|
|
Graduate students are typed bold.
2023
Bouzouiki, M., Sedaghati, R. and Stiharu, I., “Development of a Non-Uniform Cellular
Automata Framework for Sizing, Topology and Layout Optimization of Truss
Structures,” Journal of Engineering Optimization, ID: 220495037, accepted
Dec. 2023.
Jafari,
H. and
Sedaghati, R., “Tunable
Multi-Metamaterials Integrated with Auxiliary Magnetorheological Resonators,”
Materials Research Express, Vol. 10, No. 12, 126101, Nov. 2023.
Vatandoost,
H., Sedaghati, R. and Rakheja, S. “A New Method
to Characterize the Nonlinear Magneto-viscoelasticity
Behavior of Magneto-active Elastomers Under Large Amplitude Oscillatory Axial
(LAOA) Loading,” Journal of Nonlinear Dynamics, Manuscript ID: NODY-D-23-00167,
accepted Dec. 2023.
Moezi, S. A., Sedaghati, R. and Rakehja, S. “Nonlinear
Dynamic Modeling and Model-based AI-Driven Control of a Magnetoactive Soft
Continuum Robot in a Fluidic Environment,” ISA Transactions, accepted October
2023, in-press. https://doi.org/10.1016/j.isatra.2023.10.030
Zheng, Z., Rakheja, S. and Sedaghati, R., “Multi-axis and Cornering Stiffness Properties
of Non-Pneumatic Wheels with Symmetric Helical Honeycomb Spokes” Proceedings of the Institution of Mechanical
Engineers (IMechE), Part D: Journal of Automotive
Engineering, June 2023, DOI:
10.1177/09544070231182769
Wang, Y., Vatandoost, H. and Sedaghati, R., “Development of a Novel Magnetorheological Elastomer-based Semi-active Seat
Suspension Systems,” Journal of Vibration, Vol. 6, No. 4, pp. 777-795,
Dec. 2023.
Abdalaziz, M.,
Sedaghati, R. and Vatandoost, H., “Development of a Dynamic Hysteresis
Model for Annular-Radial Magnetorheological Considering Fluid Inertia and
Compressibility,” Journal of Sound and Vibration, Vol. 561, 117826, May 2023.
Saber,
A.
and Sedaghati, R., “The Modeling of
Magnetorheological Elastomers: A State-of-the-art Review", Journal of Advanced
Engineering Materials,” Vol. 25, 2300182 (p. 38), May 2023
Zabihollah, S., Moezi, S. A.
and Sedaghati, R. “Design Optimization of a
Miniaturized Pneumatic Artificial Muscle and Experimental Validation,” Journal
of Actuators, Vol 12, No. 6, pp. 221, May 2023.
Jafari, H. and Sedaghati, R., “Free and Forced Vibration
Behaviors of Magnetodielectric Effect in Magnetorheological Elastomers,”
Journal of Vibration, Vol. 6, No. 1, pp. 269-285, March 2023.
Jafari, H. and
Sedaghati, R., “Analysis of an
Adaptive Periodic Low-Frequency Wave Filter Featuring Magnetorheological Elastomers,”
Polymers, Vol. 15, No. 3, pp. 735, Jan. 2023.
Abdalaziz, M., Vatandoost, H., Sedaghati, R.
and Rakheja, S. “Design and Experimental
Characterization of a Bypass Magnetorheological Damper Featuring Variable
Damping and Stiffness,” Smart Materials and Structures, Vol. 32, 035011 (20pp), Jan. 2023.
Alibakhshi, A., Jafari,
H., Rostam-Alilou, A., Bodaghi, M., Sedaghati, R., “Nonlinear Vibration Behaviors of Dielectric Elastomer Membranes
under Multi-Frequency Excitations,” Journal of Sensors and Actuators A-Physical, Vol. 351, 114171, March 2023.
Elfar, M., Sedaghati, R. and Abdelsalam, O. R., “Numerical and
Experimental Investigation of The Transient Coupled Thermoelasticity
in a Thick-Walled Cylinder Considering Temperature-Dependent Material
Properties,” Journal of SN Applied Sciences (SNAC), Vol. 5, No. 1, Article 9, 2023.
Abdalaziz, M.,
Sedaghati, R. and Vatandoost, H., “Design Optimization and Experimental Evaluation of a Large Capacity
Magnetorheological Damper with Annular and Radial Fluid Gaps,” Journal of
Intelligent Material Systems and Structures, Vol. 34, No. 14, PP. 1646-1663, August 2023.
Lin, Y., Liu, C., Wen, G.,
and Sedaghati, R., “A Semi-Active Quasi-Zero Stiffness Vibration Isolator based
on Magnetorheological Elastomer with a Fast Convergence Switch Control,”
Journal of Intelligent Material Systems and Structures, Vol. 34, No. 13, pp.
1572-1584, August 2023.
Zheng, Z., Rakheja, S. and Sedaghati, R., “Modal Properties of Honeycomb Wheels: A Parametric Analysis using
Response Surface Method,”
European Journal of Mechanics / A Solids, Vol. 97, 104842, Jan-Feb, 2023
2022
Abdalaziz, M., Vatandoost, V., Sedaghati, R. and
Rakheja, R., “Development and Experimental Characterization of a Large-Capacity
Magnetorheological Damper with Annular-Radial Gaps,” Smart Materials and
Structures, Vol. 31, No. 11, 115021, Nov. 2022.
Mohammadtaheri, H., Sedaghati, R. and Molavi-Zarandi,
M., “Inherent Strain Approach to Estimate Residual
Stress and Deformation in the Laser Powder Bed Fusion Process – A
State-of-the-Art Review,” International Journal of Advanced Manufacturing Technology, Vol.
122, pp. 2187–2202, Sept. 2022.
Vatandoost, H., Sedaghati, R. and Rakheja, S. “A Novel Methodology
for Accurate Estimation of Magnetic Permeability of Magneto-rheological
Elastomers,” Journal of Magnetism and Magnetic Materials, Vol. 560, 169669,
Oct. 2022.
Khorrami, H., Sedaghati, R. and Rakheja, S., “Vertical
Transient Response Analysis of a Cracked Jeffcott Rotor Based on Improved
Empirical Mode Decomposition,” Journal of Vibration, Vol. 5, No. 3, pp. 408-428, Sept. 2022.
Campillo, M., Sedaghati, R. and Drew, R., Alfonso, I., Poso, L. P. “Development of an RVE
using a DEM-FEM Scheme under Modified
Approximate Periodic Boundary Condition to Estimate the Mechanical Properties
of Open Foams,” Journal of Engineering with Computers, Vol. 38, No. 3, pp. 1767-1785, Aug.
2022.
Vatandoost, H., Sedaghati, R. and Rakheja, S. ,” Development of New Phenomenological Models
for Accurate Estimation of Magnetic Permeability of Magneto-rheological
Elastomers,” Journal IEEE Transactions on Instrumentation &
Measurement, Vol. 17, 6003010, May 2022.
Zheng, Z., Rakheja, S. and Sedaghati, R., “Cornering Stiffness Characteristics of
Honeycomb Wheels: A Parametric Analysis using Response Surface Method,” Composite Structures, Vol. 228,
115418, May 2022.
Yang, F., Sedaghati, R. and Esmalizadeh, E., “Vibration
Suppression of Structures using Tuned Mass Damper Technology: A
State-of-the-Art Review,” Journal of Vibration and Control, Vol. 28, No. 7-8,
pp. 812-836, April 2022.
Zheng, Z., Rakheja, S. and Sedaghati, R., “Multi-Axis Stiffness and Road Contact
Characteristics of Honeycomb Wheels: A Parametric Analysis Using Taguchi Method,” Composite Structures, Vol. 279, 114735, Jan. 2022.
2021
Lin, F., Hemmatian, M., Sedaghati, R. and Aghili, F., “Analysis, Optimization
and Control of an Adaptive Tuned Vibration Absorber Featuring Magnetoactive
Materials,” International Journal of Smart Structures and Systems, Vol. 28, No.
4., 455-468, Oct. 2021.
Liu, C., Sedaghati, R. and Shang, P., “A Novel Semi-Active Switching Control
Scheme for Magnetorheological Elastomers-based Vibration Isolator under Dynamic
Input Saturation,” Smart Material and Structures, Vol. 30, No. 9, 095008
(11pp), August 2021.
Zheng, Z., Rakheja, S. and Sedaghati, R., "A
Comparative Study of Static and Dynamic Properties of Honeycomb Non-Pneumatic
Wheels and a Pneumatic Wheel,” Proceedings of the Institution of Mechanical
Engineers, Part D: Journal of Automobile Engineering, Vol. 235, No. 14, pp. 3631-3646, Dec. 2021.
Asadi, M., Sedaghati, R. and Hemmatian, H.,
“Adaptive Dynamic Moduli of Magnetorheological Elastomers: from Experimental
Identification to Microstructure-based Modeling,” Materials Science &
Engineering B, Vol. 267, 115083, May 2021.
Derayatifar, M., Sedaghati, R., Chandramohan, S., Packirisamy, M. and Bhat, R., “Dynamic Analysis of a
Functionally Graded Piezoelectric Energy Harvester under Magnetic Interaction,”
Journal of Intelligent Material Systems and Structures, Vol. 32, No. 9, pp.
986-1000, May 2021.
Aboutalebi, R., Eshaghi, M., Hemmatian,
M., and
Sedaghati, R., “Post-Yield Characteristics of Magnetorheological Fluids; from
Modelling to Large-Amplitude Vibration Analysis of Sandwich Plates Using
Nonlinear Finite Element Method,” Journal of Aerospace Science and Technology,
Vol. 110, 106508, March 2021.
Yang, F., Sedaghati, R. and
Esmalizadeh, E., “Vibration
Suppression of Structures using Tuned Mass Damper Technology: A
State-of-the-Art Review,” Journal of Vibration and Control, Published on
line Feb. 2021, https://doi.org/10.1177/1077546320984305.
Vatandoost, H., Hemmatian, M., Sedaghati, R. and Rakheja, S., Effect
of Shape Factor on Compression Mode Dynamic Properties of Magnetorheological
Elastomers,” Journal of Intelligent Material Systems and Structures,
Vol. 32, No. 15, pp. 1678-1699, Sept. 2021.
Vatandoost, H., Rakheja, S. and Sedaghati,
R., “Effects of Iron Particles’ Volume Fraction on Compression Mode Properties
of Magnetorheological Elastomers,” Journal
of Magnetism and Magnetic Materials, Vol. 522, 167552, March 2021.
Vatandoost, H., Rakheja, S., Sedaghati,
R. and Hemmatian,
M., Compensation of Magnetic Force
of an Electromagnet for Compression Mode Characterization of Magnetorheological
Elastomers,” IEEE Transactions on Magnetics, Vol. 57, No. 1, pp. 1-14,
Jan. 2021.
Vatandoost, H., Sedaghati, R.
and Rakheja, S. and Hemmatian, M., Effect of Pre-strain on Compression Mode Properties of
Magnetorheological Elastomers,” Polymer Testing, Vol. 93, 106888, Jan. 2021.
El Bouzouiki, M., Sedaghati, R. and Stiharu, I., “Non-Uniform
Cellular Automata Framework for Topology and Sizing Optimization of Truss
Structures subjected to Stress and Displacement Constraints,” Journal of
Computers and Structures, Vol. 242, No. 5, 106394, Jan. 2021.
Beheshti,
A.,
Sedaghati, R. and Rakheja, S., “Transversely
Isotropic Magnetoactive Elastomers: Theory and Experiments” Archive of Applied
Mechanics, Vol. 91, No. 1, pp. 375-392, Jan. 2021.
Beheshti, A., Sedaghati, R. and
Rakheja, S., “Finite Deformation Analysis of
Isotropic Magnetoactive Elastomers,” Journal of Continuum Mechanics and Thermodynamics, Vol.
33. No. 1, pp. 163-178, Jan 2021.
2020
Hemmatian, M., Sedaghati, R. and
Rakheja, S., “Characterization and Modeling of
Temperature Effect on the Shear Mode Properties of Magnetorheological
Elastomers,” Smart Materials and Structures, Vol. 29, No. 11, 115001, 2020.
Rasooli, A., Sedaghati, R. and Hemmatian, M., “A
Novel Magnetorheological Elastomer-based Adaptive Tuned Vibration Absorber:
Design, Analysis and Experimental Characterization,” Smart Materials and
Structures Vol. 29, No. 11, 115042, 2020.
Mohseni-Ardehali, N., Hemmatian, M., and Sedaghati, R., “Characterization and Modeling of Hard Particles based
Magnetorheological Elastomers,” International Journal of Intelligent Material
Systems and Structures, Vol. 32, No. 9,
pp. 909-920, May 2021.
Hadadian, A. and Sedaghati, R., “Analysis and Design Optimization of
Double-Sided Deep Cold Rolling Process of a Ti-6Al-4V Blade,” Journal of
Advanced Manufacturing Technology, Vol. 108, No.7, pp. 2103-2120, June 2020.
Liu, C., Hemmatian, M., Sedaghati, R. and Wen, G., “Development and Control of
Magnetorheological Elastomer-based Semi-active Seat Suspension Isolator using
Adaptive Neural Network Control,” Frontiers in the Materials, Vol. 7, 171,
2020.
Asadi, M., Sedaghati, R. and Hemmatian, H.
“Multidisciplinary Design Optimization of a Novel Sandwich Beam-based Adaptive
Tuned Vibration Absorber Featuring Magnetorheological Elastomers,” Journal of
Materials (Section: Smart Materials), Vol. 13, No. 10, 2261, 2020.
Beheshti, A., Sedaghati, R. and
Rakheja, S., “Development of a Small-Deformation
Material Model for Isotropic Magnetoactive Elastomers,” Acta Mechanica, Vol. 231, No. 6, pp. 2287-2301, 2020.
Liu, C., Zhao, Z., Wen, G.
and Sedaghati, R., “Neural Network-based Sliding Mode Control of an Uncertain
Robot Using Dynamic Model Approximated Switching Gain,” IEEE Transactions on Cybernetics,Vol.
51, No. 5, pp. 2339-2346, May 2021, DOI: 10.1109/TCYB.2020.2978003.
Abouobaia, E., Sedaghati, R. and Bhat, R., “Design Optimization and Experimental
Characterization of a Rotary Magneto-rheological Fluid Damper to Control
Torsional Vibration,” Journal of Smart Materials and Structures, Vol. 29, No.
4, 045010 (15pp), 2020.
Hemmatian, M., Sedaghati, R. and Rakheja, R., “Temperature
Dependency of Magnetorheological Fluids’ Properties under Varying Strain
Amplitude and Rate,” Journal of Magnetism and Magnetic Materials, Vol. 498,
166109, March 2020
Vatandoost, H., Hemmatian, M., Sedaghati, R. and Rakheja, S., “Dynamic Characterization of Isotropic and
Anisotropic Magnetorheological Elastomers in the Oscillatory Squeeze Mode
Superimposed on Large Static Pre-strain,” Journal of
Composites Part B: Engineering, Vol. 182, 107648, Feb. 2020.
2019
Asadi, M., Sedaghati, R. and Hemmatian, H.
“Experimental Characterization and Microscale Modeling of Isotropic and
Anisotropic Magnetorheological Elastomers,” Journal of Composites Part B:
Engineering, Vol. 176, 107311, August 2019.
Elneshar, G., Bhat, R. and Sedaghati, R., “Modeling
and Dynamic Analysis of a Vehicle-Flexible Pavement Coupled System Subjected to
Road Surface Excitation,” Journal of Mechanical Science and Technology, Vol.
33, No. 7, pp.3115-3125, 2019.
Elneshar, G., Bhat, R. and Sedaghati, R., “Modeling
Pavement Damage and Predicting Fatigue Cracking of Flexible Pavements Based on
a Combination of Deterministic Method with Stochastic Approach Using Miner’s
Hypothesis,” Journal of Springer Nature (SN) Applied Sciences, 1:229, 2019. https://doi.org/10.1007/s42452-019-0238-5.
Muftah, S., Sedaghati, R. and Bhat, R., “Design optimization of a Bi-fold MR
Energy Absorber Subjected to Impact Loading for Skid Landing Gear
Applications,” Journal of Smart Material and Structures, Vol. 28, No. 3, 035031
(16pp), 2019.
Dargahi, A.,
Sedaghati, R. and Rakheja, S. “On the Properties of
Magnetorheological Elastomers in Shear Mode: Design, Fabrication and Characterization,”
International Journal of Composites Part B: Engineering, Vol. 159, pp. 269-283,
Feb. 2019.
Hadadian, A. and Sedaghati, R., “Investigation on Thermal Relaxation of Residual
Stresses Induced in Deep Cold Rolling of Ti-6Al-4V Alloy,” International
Journal of Advanced Manufacturing Technology, Vol. 100, No. 1-4, pp. 877-893,
2019
Dargahi, A., Rakheja, S. and Sedaghati, R., “Development of a Field-Dependent Prandtl-Ishlinskii
Model for Magnetorheological Elastomers,” Journal of Materials and Design, Vol.
166, 107608, March 2019.
Liu, J., Chen, T., Zhang,
Y., Wen, G., Qing, Q., Wang, H., Sedaghati, R., and Xie
Y. M., “On Sound Insulation of Pyramidal Lattice Sandwich Structure,” Journal
of Composite Structures, Vol. 208, pp. 385-394, Jan. 2019.
2018
Muftah, S., Sedaghati, R. and Bhat, R., “
Dynamic Analysis of a SDOF Helicopter Model Featuring Skid Landing Gear
and MR Damper by Considering Rotor Lift Factor and Bingham Number,” Journal of
Smart Material and Structures, Vol. 27, No. 6, 065013 (15pp), 2018.
Sadeghifar, M., Sedaghati, R., Jomaa, W. and Songmene, V., “A comprehensive review of finite element
modeling of orthogonal machining process: Chip formation and surface integrity
predictions,” International Journal of Advanced Manufacturing Technology, Vol.
96, No. 9-12, pp. 3747-3791, 2018.
Shamieh, H. and Sedaghati, R., “Development, Optimization
and Control of a Novel Magnetorheological Brake with no Zero-Field Viscous
Torque for Automotive Applications,” Journal of Intelligent Material Systems
and Structures, Vol. 29, No. 16, pp. 3199-3213,
2018.
Singh, A., Yang,
F. and Sedaghati, R., “Design Optimization of Stiffened Panels using Finite
Element Integrated Force Method,” Engineering Structures, Vol. 159, pp. 99-109,
March 2018.
M. Sadeghifar, R. Sedaghati, W. Jomaa, V. Songmene, “Finite Element Analysis and Response Surface
Method for Robust Multi-Performance Optimization of Radial Turning of Hard 300M
Steel,” International Journal of Advanced Manufacturing Technology, Vol. 94,
No. 5-8, pp. 2457-2474, 2018.
Yang, F., Sedaghati, R., Esmalizadeh,
E., “Free In-Plane Vibration of Curved Beam Structures: A Tutorial and
State-of-the-Art,” Journal of Vibration and Control (JVC), Vol. 24, No. 12, pp.
2400-2417, 2018.
2017
Shamieh, H. and Sedaghati, R., “Multi-Objective Design
Optimization and Control of Magnetorheological Fluid Brake for Automotive
Applications,” Journal of Smart Materials and Structures, Vol. 26, No. 12,
125012 (15pp), 2017.
Hemmatian, M. and Sedaghati, R., “Vibro-Acoustic Topology Optimization of Sandwich Panels Partially Treated
with MR Fluid and Silicone Rubber Core Layer,” Journal of Smart
Materials and Structures, Vol. 26, No. 12, 125015 (19pp), 2017.
Hemmatian, M. and Sedaghati, R., “Sound Transmission
Analysis of MR Fluid based-Circular Sandwich Panels:
Experimental and Finite Element Analysis,” Journal of Sound and Vibration, Vol.
408, pp. 43-59, 2017.
Khorrami, H., Rakheja, S. and Sedaghati, R., “Vibration
Behavior of a Two-Crack Shaft in a Rotor Disk-Bearing System,” Mechanism and
Machine Theory, Vol. 13, pp. 67-84, 2017.
Hemmatian, M. and Sedaghati, R., “Effect of Applied Magnetic
Field on Sound Transmission Loss of MR-based Sandwich Panels,” Journal of Smart
Materials and Structures, Vol. 26, No. 2, 025006(12pp), 2017.
Zeinoun, G., Sedaghati, R. and Aghili,
F., “Optimum Design Parameters of Reconfigurable Robots with Lockable Joints,”
Transactions of the Canadian Society for Mechanical Engineering, Vol. 41, No.
1, 2017.
Eshaghi, M., Sedaghati, R. and Rakheja, S., “Vibration
Analysis and Optimal Design of Multi-layer Plates Partially Treated with the MR
fluid,” Journal of Mechanical Systems and Signal Processing, Vol. 82, No. 1,
pp. 80-102, 2017.
2016
Eshaghi, M., Sedaghati, R. and Rakheja, S., “Analytical and
Experimental Free Vibration Analysis of Multi-Layer MR-Fluid Circular Plates
under Varying Magnetic Flux,” Composite Structures, Vol. 157, pp. 78-86, 2016.
Eshaghi, M., Sedaghati, R. and Rakheja, S., “Dynamic
Characteristics and Control of MR/ER Sandwich Structures: A State-of-the-Art
Review,” Journal of Intelligent Material Systems and Structures, Vol. 27, No.
15, pp. 2003-2037, 2016.
Abouobaia, E. S., Bhat, R. and Sedaghati, R., “Development of a
New Torsional Vibration Damper Incorporating Centrifugal Pendulum Absorber and Magnetorhelogical Damper, Journal of Intelligent Material
Systems and Structures, Vol. 27, No. 7, pp. 980-992, 2016.
2015
Esteki, K., Bagchi, A. and
Sedaghati, R., “Semi-Active Control of Seismic Response of a Building using MR
Fluid-based Tuned Mass Damper,” International Journal of Smart Structures and
Systems, Vol. 16, No. 5, 2015.
Eshaghi, M., Sedaghati, R. and Rakheja, S., “The Effect of
MR Fluid on Vibration Suppression Capability of Adaptive Sandwich Plates: Experimental
and Finite Element Analysis,” Journal of Intelligent Material Systems and
Structures, Vol. 26, No. 14, pp. 1920-1935, 2015.
Eshaghi, M., Rakheja, S. and Sedaghati, R., “An Accurate
Technique for Pre-yield Characterization of MR Fluids,” Journal of Smart
Materials and Structures, Vol. 24, No. 6, 065018 (13pp), 2015.
Yang, F., Sedaghati, R. and Esmailzadeh,
E., “Optimal Design of Distributed Tuned Mass Dampers for Passive Vibration
Control of Structures,” Journal of Structural Control and Health Monitoring,
Vol. 22, No. 2, pp.
221-236, 2015.
2014
Amezquita-Sanchez, J. P., Domiguez-Gonzalez, A., Sedaghati, R., Romero-Troncoso, R. J., and Osornio-Rios,
R. A., “Vibration Control on Smart Civil Structures: A Review,” Mechanics of
Advanced Materials and Structures, Vol. 21, No. 1, pp. 23-38, 2014.
Esteki, K., Bagchi, A. and
Sedaghati, R., “Dynamic Analysis of Electro and Magneto-Rheological Fluid
Dampers using the Duct Flow Models,” Smart Materials and Structures, Vol. 23,
No. 3, 035016 (11pp), 2014.
Mohammadi, F., Sedaghati, R., Bonakdar,
A., “Finite Element Analysis and Design Optimization of Low Plasticity
Burnishing Process,” International Journal of Advanced Manufacturing
Technology, Vol. 70, No. 5-8, pp. 1337-1354, 2014.
Hadadian, A., Sedaghati, R. and Esmailzadeh,
E., “Design optimization of Magnetorheological Fluid Valves using Response
Surface Method,” Journal of Intelligent Material Systems and Structures, Vol.
25, No. 11, pp. 1352-1371, 2014.
Dominguez, A., Stiharu, I. and
Sedaghati, R., “Practical Hysteresis Model for Magneto-Rheological Dampers,” Journal of
Intelligent Material Systems and Structures, Vol. 25, No. 8, pp. 967-979, 2014.
Abdelsalam, R. O. and Sedaghati, R., “Coupled Thermo-Mechanical
Analysis of Autofrettaged and Shrink fitted Compound
Cylindrical Shells,” ASME Transactions-Journal of Pressure Vessel Technology,
Vol. 136, No. 1, pp. 011204-1:12, 2014.
Yang, F., Sedaghati, R. and Esmailzadeh,
E., “Vibration Suppression of Curved Beam-Type Structures using Optimal
Multiple Tuned Mass Dampers,” Journal of Vibration and Control (JVC), Vol. 20,
No. 6, pp. 859-875, 2014.
2013
Abdelsalam, R. O. and Sedaghati, R., “Design Optimization of
Compound Cylinders Subjected to Autofrettage and
Shrink-Fitting Processes,” ASME Transactions-Journal of Pressure Vessel
Technology, Vol. 135, No. 2, pp: 021209-1:11, 2013.
Grewal, J. S., Sedaghati, R. and Esmailzadeh,
E., “Vibration Analysis and Design Optimization of Sandwich Beams with
Constrained Viscoelastic Core Layer ,” Journal of
Sandwich Structures and Materials, Vol. 15, No. 2, pp. 203-228, 2013.
2012
Mohammadi, F. and Sedaghati, R., "Vibration Analysis
and Design Optimization of Sandwich Cylindrical Panels Fully and Partially
Treated with Electrorheological Fluid Materials," Journal of Intelligent
Material Systems and Structures, Vol. 23, No. 15, pp. 1679-1697, 2012.
Mohammadi, F. and Sedaghati, R., “Nonlinear Free Vibration
Analysis of
Sandwich Shell Structures with Constrained Electrorheological Fluid Layer,”
Journal of Smart Materials and Structures, Vol. 21, No.7, 075035 (18pp), 2012.
Mohammadi, F. and Sedaghati, R., “Dynamic Mechanical
Properties of an Electrorheological Fluid under Large Amplitude Oscillatory Shear
Strain,” Journal of Intelligent Material Systems and Structures, Vol. 23, No.
10, pp. 1093-1105, 2012.
Mohammadi, F. and Sedaghati, R., “Vibration Analysis and
Design Optimization of Viscoelastic Sandwich Cylindrical Shell,” Journal of
Sound and Vibration, Vol. 331, |No. 12, pp. 2729-2752, 2012.
Mohammadi, F. and Sedaghati, R., “Linear and Nonlinear
Vibration Analysis of Sandwich Cylindrical Shell with Constrained Viscoelastic
Core Layer,” International Journal of Mechanical Sciences, Vol. 54, No. 1, pp.
156-171, 2012.
Mohammadi, F. and Sedaghati, R., "Effect of Pressure
and Temperature on the Vibration Behavior of Sandwich Cylindrical Shells,"
Journal of Sandwich Structures and Materials, Vol. 14, No. 2, pp. 157-180,
2012.