Procedure to choose Partitions and bypass Zones on alarm system

1. Choose Partition if any, if not go to 2.

- Press and hold down the '#' key for 3 seconds or till it beeps

- Use '<' or '>' to scroll to proper partition

- Press '*' to select partition and wait for beeps

2. Disarm system by entering your code

3. Choose Partition if any (SEE STEP 1).

4. Choose Zone to bypass.

- Press '*' twice.

- Use '<' or '>' to scroll to proper zone to bypass

- Press '*' to select zone

- Press '#' to exit bypass option

5. Arm alarm system.

6. Once work in finish in bypassed area, choose the correct partition, disarm and re-arm alarm system for that partition.