Refereed
Journal Papers:
|
[J125] |
Elsayed
Nagy, I., Asadian, A., and Galal, K. (2026). “A Simplified Probabilistic
Fatigue-Life Model for FRP Reinforcing Bars Using a Normal Distribution
Approach,” Structures Journal, Elsevier, accepted. |
|
[J124] |
Farag, A.,
and Galal, K. (2026). “Influence of shrinkage-reducing admixtures (SRAs) on the shrinkage performance of an eco-friendly
material under various curing conditions,” Construction and Building
Materials Journal, Elsevier, accepted. |
|
[J123] |
Elsayed
Nagy, I., Asadian, A., and Galal, K. (2026). “Stress Ratio Effect on the
Fatigue Behavior of Ribbed Glass Fiber-Reinforced Polymer Bars for Concrete
Reinforcement,” ASCE Journal of Composites for Construction, accepted. |
|
[J122] |
Habibi,
O., Asadian, A., and Galal, K. (2025). “Effect of surface profile on the bond
strength of lap spliced GFRP bars in concrete beams,” Engineering Structures
Journal, Elsevier, accepted. |
|
[J121] |
AbdelRahman, M.Z., and Galal, K. (2025). “Experimental investigation
of in-plane shear and compressive behaviour of dry-stacked interlocking
concrete masonry,” Construction and Building Materials Journal, Elsevier,
accepted. |
|
[J120] |
Montaser, A., AbdelRahman, B., and Galal, K. (2025). “Interface Shear
Capacity of Rough and Smooth Concrete Interfaces Reinforced with GFRP Shear‒Friction
Reinforcement,” ASCE Journal of Composites for Construction, accepted. |
|
[J119] |
Shabani,
H, Asadian, A., and Galal, K. (2025). “Flexural and Serviceability Behaviour
of Macro-Synthetic Fibre-Reinforced Concrete Beams Reinforced with GFRP
Bars,” Construction and Building Materials Journal, Elsevier, accepted. |
|
[J118] |
Zorainy,
M.Y., AbdelRahman, B.,
Ashour, A, Obaidat, A., and Galal, K. (2025). “Stress‒Strain Behavior
of Masonry Boundary Element Prisms under Axial Compression,” Structures
Journal, Elsevier, accepted. |
|
[J117] |
Habibi,
O., Gouda, O., and Galal, K. (2025). “Machine learning-based prediction of
crack width and bond-dependent coefficient (kb) in GFRP-reinforced concrete
beams,” Case Studies in Construction Materials, Elsevier, accepted. |
|
[J116] |
Mahrous,
A., AbdelRahman, B., and Galal, K. (2025). “Quasistatic Cyclic Behavior of a Reinforced Masonry
C-shaped Core Wall with Boundary Elements,” ASCE Structural Engineering
Journal, accepted. |
|
[J115] |
Shabani
Attar, H., Asadian, A., and Galal, K. (2025). “Investigating the Influence of
Macro-Synthetic Fibers on Shear Strength of GFRP-RC Beams,” Construction and
Building Materials Journal, Elsevier, accepted. |
|
[J114] |
AbdAllah,
A., AbdelRahman, B., and Galal, K. (2025).
“Influence of Material Properties and Reinforcement on the Compressive and
Shear Strengths of Concrete Masonry,” Structures Journal, Elsevier, accepted. |
|
[J113] |
Al-Ahdal,
A., AbdelRahman, B., and Galal, K. (2025).
“In-Plane Lateral Cyclic Response of Partially Grouted Reinforced Concrete
Masonry Shear Walls with Boundary Elements,” Engineering Structures Journal,
Elsevier, accepted. |
|
[J112] |
AbdAllah,
A., AbdelRahman, B., and Galal, K. (2025). “Lateral
Cyclic Performance of Flexural-dominated Partially Grouted Reinforced
Concrete Masonry Shear Walls with Bed Joint Reinforcement,” Engineering
Structures Journal, Elsevier, accepted. |
|
[J111] |
Al-Ahdal,
A., AbdelRahman, B., and Galal, K. (2024).
“Compressive, Shear, and Tensile Behaviours of
Concrete Masonry: Experimental and Numerical Study,” Journal of Construction
and Building Materials, Elsevier, accepted. |
|
[J110] |
Mahrous,
A., AbdelRahman, B., and Galal, K. (2024). “Seismic
Collapse Risk Assessment and Fragility Analysis of Reinforced Masonry Core
Walls with Boundary Elements Using the FEMA P695 Methodology,” Journal of
Building Engineering, Elsevier, accepted. |
|
[J109] |
Elmeligy,
O., AbdelRahman, B., and Galal, K. (2024).
“Experimental Assessment of the In-plane Cyclic Response of Flanged Partially
Grouted Reinforced Masonry Shear Walls Failing in Flexure,” Engineering
Structures Journal, Elsevier, accepted. |
|
[J108] |
Habibi,
O., Asadian, A., and Galal, K. (2024). “Bond between Single and Bundled
High-Modulus Ribbed GFRP Bars with Short Embedment Lengths and Concrete,”
Advances in Structural Engineering Journal, accepted. |
|
[J107] |
Mahrous,
A., AbdelRahman, B., and Galal, K. (2024).
“Experimental Investigation of the Effects of Different Reinforcement Configurations
on the Shear Strength of Reinforced Concrete Block Masonry,” Engineering
Structures Journal, Elsevier, accepted. |
|
[J106] |
Elsayed
Nagy, I., Asadian, A., and Galal, K. (2024). “Tension-Tension Fatigue
Behavior of Ribbed Glass Fiber-Reinforced Polymer Bars in Air,” ASCE Journal
of Composites for Construction, accepted. |
|
[J105] |
Elsayed
Nagy, I., Asadian, A., and Galal, K. (2024). “Fatigue Life and Behaviour of
Ribbed GFRP Reinforced Concrete Beams,” Engineering Structures Journal,
Elsevier, accepted. |
|
[J104] |
Elmeligy,
M., AbdelRahman, B., and Galal, K. (2024).
“Experimental investigation of the compressive and shear behaviours
of grouted and hollow masonry constructed with PVA
fibre-reinforced mortar and grout,” Construction and Building Materials
Journal, Elsevier, accepted. |
|
[J103] |
Elmeligy,
M., AbdelRahman, B., and Galal, K. (2023). “Numerical Assessment
of TMS 402/602-22 and CSA S304-14 Seismic Design Provisions for Partially
Grouted Reinforced Masonry Shear Walls Failing in Flexure,” Engineering
Structures Journal, Elsevier, 303, 117370. |
|
[J102] |
Albutainy,
M., and Galal, K. (2023). “Effect of Boundary
Element Detailing on the Seismic Performance of Reinforced Concrete Masonry
Shear Walls,” Engineering Structures Journal, Elsevier, 295, 116804. |
|
[J101] |
AbdAllah,
A., AbdelRahman, B., and Galal, K. (2023). “Numerical Study of
Fully Grouted Reinforced Masonry Shear Walls with Boundary Elements Subjected
to Dynamic Loading,” Engineering Structures Journal, Elsevier, 295,
116804. |
|
[J100] |
Gouda,
O., Asadian, A., and Galal, K. (2023). “Investigation of
different parameters affecting the crack width and kb coefficient
of GFRP-RC beams,” Engineering Structures Journal, Elsevier, 297, 116181. |
|
[J99] |
Gouda,
O., Hassanein, A., and Galal, K. (2023). “Experimental and
numerical study on the crack width and deflection performance of GFRP
reinforced concrete beams,” Engineering Structures Journal, Elsevier,
283, 115721. |
|
[J98] |
Ibrahim, M., Asadian, A., and Galal, K.
(2023). “A
simplified approach for design of steel-GFRP hybrid reinforced concrete
sections” Engineering Structures Journal, Elsevier, 278, 115352. |
|
[J97] |
Mahrous, A., AbdelRahman,
B., and Galal, K. (2022). “Seismic Response
Analysis of Reinforced Masonry Core Walls with Boundary Elements”
Engineering Structures Journal, Elsevier, 270, 114882. |
|
[J96] |
Alotaibi, K.S., AbdelRahman, B., and Galal, K. (2022). “Analytical Study and
Design Approach of the Axial and Flexural Response of Reinforced Masonry
Columns Confined with FRP Jackets” Engineering Structures Journal,
Elsevier, 269, 114805. |
|
[J95] |
Gouda,
O., Hassanein, A., and Galal, K. (2022). “Proposed
Development Length Equations for GFRP Bars in Flexural Reinforced Concrete
Members,” ASCE Journal of Composites for Construction, 27(1), 04022092. |
|
[J94] |
Alotaibi, K.S., Saiful Islam, A.B.M., and
Galal, K. (2022). “Axial
performance of grouted C-Shaped concrete block masonry columns jacketed by
carbon and glass FRP” Engineering Structures Journal, Elsevier, 267,
114698. |
|
[J93] |
Gouda, O., Asadian, A., and Galal, K. (2022).
“Flexural and serviceability
behavior of concrete beams reinforced with ribbed GFRP bars,” ASCE
Journal of Composites for Construction, 26(5), 04022064. |
|
[J92] |
Rezaiefar, A., and Galal, K. (2022). “Large Displacement
Analysis of Stiffened Plates with Parallel Ribs Under Lateral Pressure Using
FE Modeling with Shell Elements,” Engineering Structures Journal,
Elsevier, volume 259, 114125. |
|
[J91] |
AbdelRahman, B.,
and Galal, K. (2022). “Sensitivity of the
Seismic Response of Reinforced Concrete Masonry Walls with Boundary Elements
to Design Parameters,” Engineering Structures Journal, Elsevier, volume
255, 113953. |
|
[J90] |
Al-Ahdal, A, Aly, N., and Galal, K. (2021). “Simplified Analytical
Models for Partially Grouted Reinforced Masonry Shear Walls,” Engineering
Structures Journal, Elsevier, volume 252, 13643. |
|
[J89] |
AbdelRahman, B.,
and Galal, K. (2021). “Monotonic and Cyclic
Stress-Strain Models for Confined Concrete-Masonry Shear Wall Boundary
Elements,” Engineering Structures Journal, Elsevier, volume 249, 113343. |
|
[J88] |
Albutainy, M., and Galal, K. (2021). “Experimental
Investigation of Reinforced Concrete Masonry Shear Walls with C-Shaped
Masonry Units Boundary Elements,” Structures Journal, Elsevier, volume
34, pp. 3667-3683. |
|
[J87] |
Hosseinzadeh, S., and Galal, K. (2021). “Probabilistic Seismic
Resilience Quantification of a Reinforced Masonry Shear Wall System with
Boundary Elements Under Bi-Directional Horizontal Excitations,”
Engineering Structures Journal, Elsevier, Volume 247, 113023. |
|
[J86] |
Rahmatian, A., Saleem, H., Bagchi, A., Nokken, M., and Galal, K. (2021).
“Modeling of Supplemental Bar-Mounted
Fiber Optic Strain Sensor for Structural Health Monitoring Applications”
Journal of Experimental Techniques, Springer, accepted. |
|
[J85] |
Elmeligy, O., Aly, N., and Galal, K. (2021).
“Sensitivity
Analysis of the Numerical Simulations of Partially Grouted Reinforced Masonry
Shear Walls” Engineering Structures Journal, Elsevier, Volume 245,
112876. |
|
[J84] |
El-Tahan,
M., Hassanein, A., Megid, W., and Galal, K. (2021). “Evaluation of Reinforced
Concrete Beams Retrofitted in Shear with Mechanically Anchored Dry Carbon
Fiber Sheets,” Journal of Experimental Techniques, Springer, Volume 45,
Issue 4. |
|
[J83] |
AbdelRahman, B.,
and Galal, K. (2021). “Experimental
Investigation of Axial Compressive Behavior of Square and Rectangular
Confined Concrete-Masonry Structural Wall Boundary Elements,” Engineering
Structures Journal, Elsevier, Volume 243, 112584. |
|
[J82] |
Hamzeh, L., Ashour, A., Aly, N. and Galal, K.
(2021). “Effective
Stiffness and Period-Dependent Seismic Response Modification Factors for
Flexure-Dominated Fully-Grouted Reinforced Masonry Rectangular Shear Walls,”
Engineering Structures Journal, Elsevier, Volume 243, 112566. |
|
[J81] |
Hamzeh, L., Hassanein, A., and Galal, K. (2020). “Numerical
Study on the Seismic Response of GFRP and Steel Reinforced Masonry Shear
Walls with Boundary Elements,” Structures Journal, Elsevier, 28,
1946-1964. |
|
[J80] |
Gouda, O., Hassanein, A., Youssef, T., and
Galal, K. (2020). “Stress-Strain
Behaviour of Masonry Prisms Constructed with Glass Fibre-Reinforced Grout,”
Construction and Building Materials, Elsevier, 267, 120984. |
|
[J79] |
Aly, N., and Galal, K. (2020). “Experimental
Investigation of Axial Load and Detailing Effects on the Inelastic Response
of Reinforced Concrete Masonry Structural Walls with Boundary Elements,”
ASCE Structural Engineering Journal, 146-12. |
|
[J78] |
El-Sokkary, H., and Galal, K. (2020). “Material
quantities of reinforced masonry versus reinforced concrete shear walls,”
Structures Journal, Elsevier. 27, 767-779. |
|
[J77] |
Hosseinzadeh, S., and Galal, K. (2020). “System-level seismic
resilience assessment of reinforced masonry shear wall buildings with masonry
boundary elements,” Structures Journal, Elsevier, 26, 686-702. |
|
[J76] |
Aly, N., and Galal K. (2020). “In-Plane Cyclic
Response of High-Rise Reinforced Concrete Masonry Structural Walls with
Boundary Elements,” Engineering Structures Journal, Elsevier, 219,
110771. |
|
[J75] |
AbdelRahman, B.,
and Galal, K. (2020). “Influence
of Pre-Wetting, Non-Shrink Grout, and Scaling on the Compressive Strength of
Grouted Concrete Masonry Prisms,”. Journal of
Construction and Building Materials, Elsevier, 241-117985, SN: 0950-0618. |
|
[J74] |
Hosseinzadeh, S, and Galal, K. (2020). “Seismic
Fragility Assessment and Resilience of Reinforced Masonry Flanged Wall
Systems,”. ASCE Journal of Performance of
Constructed Facilities. 34(1). |
|
[J73] |
Seif ElDin, H., Aly, N., and Galal, K.
(2020). “In-Plane
Shear Strength Equation for Fully Grouted Reinforced Masonry Shear Walls,”
Engineering Structures Journal, Elsevier, 190, 319-332. |
|
[J72] |
Aly
N., and Galal K. (2020). “Effect
of Ductile Shear Wall Ratio and Cross-Section Configuration on the Seismic Behavior
of Reinforced Concrete Masonry Shear Wall Buildings,” ASCE Journal of
Structural Engineering, 146(4). |
|
[J71] |
Aly, N., and Galal, K. (2019). “Seismic Performance
and Height Limits of Ductile Reinforced Masonry Shear Wall Buildings with
Boundary Elements,” Engineering Structures Journal, Elsevier, 190,
171-188. |
|
[J70] |
Seif ElDin, H., Ashour, A., and Galal, K.
(2019). “Seismic
Performance Parameters of Fully Grouted Reinforced Masonry Squat Shear Walls,”
Engineering Structures Journal, Elsevier, 187, 518-527. |
|
[J69] |
Ahmed, S., and Galal, K. (2019). “Response of
Metallic Sandwich Panels to Blast Loads,” ASCE Journal of Structural
Engineering, 145(12): 04019145. |
|
[J68] |
El-Sokkary, H., and Galal, K. (2019). “Performance
of Eccentrically Loaded Reinforced Concrete Masonry Columns Strengthened
using FRP Wraps,” ASCE Journal of Composites for Construction, 23(5):
1-12. |
|
[J67] |
Obaidat, A., Ashour, A., and Galal, K.
(2018). “Stress-strain
model for C-shape confined concrete masonry boundary elements of RM shear
walls,” Engineering Structures Journal, Elsevier, Volume 183, 1059-1071. |
|
[J66] |
Alotaibi, K.S., and
Galal, K. (2018). “Experimental
study of CFRP confined reinforced concrete masonry columns tested under
concentric and eccentric loading” Elsevier Journal of Composites Part B:
Engineering, 155: 257-271. |
|
[J65] |
El-Sokkary, H., and Galal, K. (2018). “Effect of preliminary
selection of RC shear wallsꞌ ductility level on material quantities,”
International Journal of Concrete Structures and Materials, Springer, 12: 48. |
|
[J64] |
Arabzadeh, H., and Galal, K. (2018). “Seismic Response
Analysis of RC C-Shaped Core Walls Subjected to Combined Flexure, Shear and
Torsion,” ASCE Structural Engineering Journal, 144(10): 04018165. |
|
[J63] |
Obaidat, A., Ashour, A., and Galal, K.
(2018). “Stress-strain
behavior of C-shaped confined concrete masonry boundary elements of RM shear
walls,” ASCE Structural Engineering Journal, 144(8): 04018119. |
|
[J62] |
Rezaiefar, A., and Galal, K. (2018). “Free vibration of thin
rectangular steel plates with geometrically-nonlinear load-displacement
behavior,” Journal of Thin-Walled Structures, Elsevier, 129, 381-390. |
|
[J61] |
Ashour, A., Galal, K., and Farnia, N. (2018). “Analytical
and experimental study on upgrading the seismic performance of reinforced masonry
columns using GFRP and CFRP wraps,” ASCE Journal of Composites for
Construction, 22(4): 04018013, 1-13. |
|
[J60] |
Rouhani, F., Lin, L., and Galal, K. (2018). “Developing a Plastic Hinge
Model for RC Beams prone to Progressive Collapse,” Canadian Journal for
Civil Engineering, 45(6): 504-515. |
|
[J59] |
Hamzeh, L., Ashour, A., and Galal, K. (2018).
“Development
of Fragility Curves for Reinforced Masonry Structural Walls with Boundary
Elements,” ASCE Journal of Performance of Constructed Facilities, 32(4):
04018034, 1-12. |
|
[J58] |
Seif ElDin, H., and Galal, K. (2018). “Effect of
reinforcement anchorage end detail and spacing on seismic performance of
masonry shear walls,” ASCE Structural Engineering Journal, 157: 268-279. |
|
[J57] |
Aly, N., AlHamaydeh, M., and Galal, K.
(2018). “Quantification
of the impact of detailing on the performance and cost of RC shear wall
buildings in regions with high uncertainty in seismicity hazards”.
Journal of Earthquake Engineering, 2018, 1-26. |
|
[J56] |
ElAghoury, I,
Seif ElDin, H, and Galal, K. (2017). “Nominal moment
capacity of partially deteriorated AISC W-section
beams”, J. of Engineering Failure Analysis, Elsevier, 82,123–137. |
|
[J55] |
AlHamaydeh, M., Aly, N., and Galal, K.
(2017). “Seismic response
and life-cycle cost of reinforced concrete special structural wall buildings
in Dubai, UAE”. Structural Concrete Journal, 10.1002/suco.201600177,
1–12. |
|
[J54] |
Li, Y., Han, X., Galal, K., and Ji, J.
(2017). “Experimental
study on the shear behavior of the interface between cushion materials and the
concrete raft”. J. of Earthquake Engineering and Engineering Vibration,
17(1), 165-178. |
|
[J53] |
Aly, N., AlHamaydeh, M., and Galal, K.
(2017). “Impact
of seismicity on performance and cost of RC shear wall buildings in Dubai,
UAE”. J. of Performance of Constructed Facilities, ASCE, 31(5): 04017083,
1–14. |
|
[J52] |
Alotaibi, K.S., and
Galal, K. (2017). “Axial Compressive
Behavior of Grouted Concrete Block Masonry Columns Confined by CFRP Jackets,”
Elsevier Journal of Composites Part B: Engineering, 114(1), 467–479. |
|
[J51] |
Arabzadeh, H., and Galal, K. (2017). “Seismic Collapse
Risk Assessment and FRP Retrofitting of RC Coupled C-Shaped Core Walls using
the FEMA P695 Methodology,” ASCE Structural Engineering Journal, 143(9):
04017096, 1–20. |
|
[J50] |
Ahmed,
S., and Galal, K. (2017). “Effectiveness of
FRP sandwich panels for blast resistance,” Journal of Composite
Structures, Elsevier, 163, 454–464. |
|
[J49] |
Seif ElDin, H., and Galal, K. (2017). “In-plane seismic
performance of fully grouted reinforced masonry shear walls,” ASCE
Structural Engineering Journal, 143(7):04017054, 1-13. |
|
[J48] |
Obaidat,
A., Abo El Ezz, A., and Galal, K. (2017). “Compression behavior
of confined concrete masonry boundary elements,” Engineering Structures
Journal, Elsevier, 132, 562–575. |
|
[J47] |
Rezaiefar, A., and Galal, K. (2016). “Structural design of
stiffened plates of industrial duct walls with relatively long panels
undergoing large deformations,” Journal of Thin-Walled Structures,
Elsevier, 108, 406-415. |
|
[J46] |
Ahmed, S., El-Sokkary, H., and Galal, K.
(2016). “Numerical
simulation of FRP sandwich panels under blast effects,” ASCE Journal of
Performance of Constructed Facilities, 31(1): 04016077. |
|
[J45] |
Chen, Y., Galal, K., and Athienitis, A.K. (2016). “Integrating hollow-core
masonry walls and precast concrete slabs into building space heating and
cooling,” Journal of Building Engineering, Elsevier, 5, 277-287. |
|
[J44] |
Abo El Ezz, A., Seif ElDin, H., and Galal, K.
(2015). “Influence
of confinement reinforcement on the compression stress-strain of grouted reinforced
concrete block masonry boundary elements,” Structures Journal, Elsevier,
2, 32-43. |
|
[J43] |
Alsharawy, M.,
Galal, K., and Stathopoulos, T. (2014). “Torsional and Shear
Wind Loads on Flat-Roofed Buildings,” Journal of Engineering Structures,
84, 313-324. |
|
[J42] |
Chen Y., Athienitis A.
Galal K. (2014). “A
Charging Control Strategy for Active Building-Integrated Thermal Energy
Storage Systems Using
requency Domain Modeling,” Journal of Energy and Buildings.
Elsevier. 84: 651-661. |
|
[J41] |
Chen Y., Galal K., Athienitis A. (2014). “Design
and Operation Methodology for Active Building-Integrated Thermal Energy
Storage Systems,” Journal
of Energy and Buildings. Elsevier. 84: 575-585. |
|
[J40] |
Alshamrany, O.,
Galal, K., and Alkass, S. (2014). “Integrated LCA–LEED sustainability assessment model for structure
and envelope systems of school buildings,” Journal of Building and
Environment, 80, 61-70. |
|
[J39] |
ElAghoury, I.,
and Galal, K. (2014). “Design
of rectangular industrial duct plates subjected to out-of-plane pressure
considering nonlinear large deformations,” Journal of Thin-Walled
Structures, 77, 1-7. |
|
[J38] |
ElAghoury, I.,
and Galal, K. (2014). “Corrosion-fatigue
strain-life model for steel bridge girders under various weathering
conditions,” Journal of Structural Engineering, ASCE, 140(6), 1-9. |
|
[J37] |
Elsharawy, M., Galal, K., and Stathopoulos,
T. (2014). “Design
wind loads including torsion for rectangular buildings with horizontal aspect
ratio of 1.6,” Journal of Structural Engineering, ASCE, Note 140(4), 1-5. |
|
[J36] |
Elsharawy,
M., Galal, K., and Stathopoulos, T. (2014). “Comparison of wind tunnel
measurements with NBCC 2010 wind-induced torsion provisions for low- and
medium-rise buildings,” Canadian
Journal of Civil Engineering, 41(5): 409-420. |
|
[J35] |
Stathopoulos, T., Elsharawy, M., and Galal,
K. (2013). “Wind
load combinations including torsion for rectangular medium-rise buildings,”
International Journal of High-Rise Buildings, 2(3), 245-255. |
|
[J34] |
AlHamaydeh, M., Galal, K., and Yehia, S.
(2013). “Impact of
lateral force-resisting system and design/construction practices on seismic
performance and cost of tall buildings in Dubai, UAE,” Journal of
Earthquake Engineering and Engineering Vibrations, 12(3), 385-397. |
|
[J33] |
Chen, Y., Athienitis, A.K.,
and Galal, K. (2013). “Frequency
domain and finite difference modeling of ventilated concrete slabs and
comparison with field measurements: Part 2, application,” International
Journal of Heat and Mass Transfer, Elsevier, 66, 957-966. |
|
[J32] |
Chen, Y., Athienitis, A.K.,
and Galal, K. (2013). “Frequency
domain and finite difference modeling of ventilated concrete slabs and
comparison with field measurements: Part 1, modeling methodology,”
International Journal of Heat and Mass Transfer, Elsevier, 66, 948-956. |
|
[J31] |
El-Aghoury, I., and Galal, K. (2013). “A fatigue
stress-life damage accumulation model for variable amplitude fatigue loading
based on virtual target life,” Engineering Structures Journal, Elsevier,
52, 621-628. |
|
[J30] |
El-Sokkary, H., and Galal, K. (2013). “Seismic Behavior
of FRP-Strengthened RC Shear Walls,” Journal of Composites for
Construction, ASCE, 17(5), 603–613. |
|
[J29] |
Azimi, H., Galal, K., and Pekau, O.A. (2013). “A numerical element
for real-time vehicle-bridge interaction analysis of vehicles experiencing
acceleration or deceleration”, Engineering Structures, 49, 792-805. |
|
[J28] |
ElTahan, M., Galal, K., and Hoa, SV.
(2013). “New
Thermoplastic CFRP bendable rebars for reinforcing Structural Elements,”
J. of Composites Part B: Engineering, Elsevier, 45(2013), 1207-1215. |
|
[J27] |
El-Sokkary, H.,
Galal, K., Ghorbanirenani, I., Léger, P., Tremblay,
R. (2012). “Shake table
tests on FRP-rehabilitated RC shear walls,” Journal of Composites for
Construction, ASCE, 17(1), 79-90. |
|
[J26] |
Chen, Y., Athienitis, and Galal, K. (2012). “Thermal
Performance and Charge Control Strategy of a Ventilated Concrete Slab (VCS)
with Active Cooling Using Outdoor Air,” ASHRAE
Transactions, 118(2), 556-568. |
|
[J25] |
ElSharawy, M.,
Stathopoulos, T., and Galal, K. (2012). “Wind-induced torsional
loads on low buildings,” Journal of Wind Engineering and Industrial
Aerodynamics, Elsevier,Vol.
104-106, pp. 40-48. |
|
[J24] |
Galal,
K., Seif ElDin, H., and Tirca, L. (2012). “Flexural
performance of steel girders retrofitted using CFRP materials,” Journal
of Composites for Construction, ASCE, 16(3), 265-276. |
|
[J23] |
Galal, K., Farnia,
N., and Pekau, O.A. (2012). “Upgrading the
seismic performance of reinforced masonry columns using CFRP Wraps,”
Journal of Composites for Construction, ASCE, 16(2), 196-206. |
|
[J22] |
Azimi, H., Galal, K., and Pekau, O.A. (2011). “A modified numerical
vehicle bridge interaction (VBI) element for
vehicles with constant velocities including road irregularities,”
Engineering Structures Journal, ElSevier, 33(7),
2212-2220. |
|
[J21] |
Galal, K., and Enginsal, M.A. (2011.) “Flexural
behaviour of GFRP-reinforced concrete masonry beams,” Journal of
Composites for Construction ASCE, 15(1), 21-31. |
|
[J20] |
Chen, Y., Athienitis, A., and Galal, K.
(2010). “Modeling,
design and thermal performance of a BIPV/T system
thermally coupled with a ventilated concrete slab in a low energy solar
house: part 1, BIPV/T system,” Journal of Solar
Energy, Elsevier, 84(11), 1892-1907. |
|
[J19] |
Chen, Y., Galal, K., and Athienitis, A.
(2010). “Modeling,
design and thermal performance of a BIPV/T system
thermally coupled with a ventilated concrete slab in a low energy solar
house: part 2, ventilated concrete slab,” Journal of Solar Energy,
84(11), 1908-1919. |
|
[J18] |
Galal, K., and El-Sawy, T. (2010). “Effect of retrofit
strategies on mitigating progressive collapse of steel frame structures,”
Journal of Constructional Steel Research, Elsevier, 66, 520-531. |
|
[J17] |
Galal, K., and Mofidi, A. (2010). “Shear
Strengthening of RC T-Beams using mechanically-anchored unbonded
dry carbon fiber sheets,” Journal of Performance of Constructed
Facilities, ASCE, 24(1), 31-39. |
|
[J16] |
Galal, K., and Sasanian, N. (2009). “Out-of-plane
flexural performance of GFRP-reinforced masonry walls,” Journal of
Composites for Construction, ASCE, 14(2), 162-174. |
|
[J15] |
Yagob, O., Galal, K., and Naumoski,
N. (2009). “Progressive
collapse of reinforced concrete structures,” Journal of Structural
Engineering and Mechanics, an Int. Journal, 32(6), 771-786. |
|
[J14] |
El-Sokkary, H., and Galal, K. (2009). “Analytical
investigation of the seismic performance of RC frames rehabilitated using
different rehabilitation techniques.” Engineering Structures Journal,
Elsevier, 31(9), 1955-1966. |
|
[J13] |
Galal, K., and Mofidi, A. (2009). “Strengthening
RC beams in flexure using new hybrid FRP sheet / ductile anchor system.”
Journal of Composites for Construction, ASCE, 13(3), 217-225. |
|
[J12] |
Azimi, H., Galal, K., and Pekau, O. (2009). “Incremental Modified Pushover
Analysis”, The Structural Design of Tall and Special Buildings Journal,
18, 839-859. |
|
[J11] |
Galal, K., and Yang, Q. (2009). “Experimental and
analytical behaviour of haunched thin-walled RC girders and box girders”, Thin-Walled
Structures Journal, 27(2), 202-218. |
|
[J10] |
Galal, K., and El-Sokkary, H. (2008). “Analytical
evaluation of seismic performance of RC frames rehabilitated using FRP for
increased ductility of members.” Journal of Performance of Constructed
Facilities, ASCE, 22(5), 276-288. |
|
[J09] |
Galal, K., and Naimi, M. (2008). “Effect of soil conditions on the
response of reinforced concrete tall structures to near-fault earthquakes,”
The Structural Design of Tall and Special Buildings Journal, Wiley InterScience, 17(3), 541-562. |
|
[J08] |
Galal, K. (2008). “Modeling
of Lightly RC walls subjected to near-fault and far-field earthquake ground
motions.” The Structural Design of Tall and Special Buildings
Journal, 17(2), 295-312. |
|
[J07] |
Galal, K., and Sekar,
M. (2008). “Rehabilitation
of RC inverted-T girders using anchored CFRP sheets,” Journal of
Composites Part B: Engineering, Elsevier, 39(4), 604-617. |
|
[J06] |
Galal, K. (2007). “Lateral
force-displacement ductility relationship of non-ductile squat RC columns
rehabilitated using FRP confinement.” Journal of Structural Engineering
and Mechanics, an International Journal, 25(1), 75-90. |
|
[J05] |
Galal, K. and Ghobarah,
A. (2006). “Effect
of near-fault earthquakes on the nuclear design spectra,” Journal of
Nuclear Engineering and Design, Elsevier, 236(18), 1928-1936. |
|
[J04] |
Galal, K., Arafa,
A., and Ghobarah, A. (2005). “Retrofit of RC
square short columns,” Engineering Structures Journal, Elsevier, 27(5),
801-813. |
|
[J03] |
Ghobarah, A.,
and Galal, K. (2004). “Out-of-plane
strengthening of URM walls with openings,”
Journal of Composites for Construction, ASCE, 8(4), 298-305. |
|
[J02] |
Ghobarah, A., and Galal, K. (2004). “Seismic
rehabilitation of short rectangular RC columns,” Journal of Earthquake
Engineering, 8(1), 45-68. |
|
[J01] |
Galal, K., and Ghobarah,
A. (2003). “Flexural
and shear hysteretic behaviour of reinforced concrete columns with variable
axial load,” Engineering Structures Journal, 25(11), 1353-1367. |
Refereed
Conference Papers and Presentations:
|
AbdAllah,
A., AbdelRahman, B., and Galal, K. (2025). “Lateral
Cyclic Behaviour of High-Aspect-Ratio Partially Grouted Reinforced Masonry
Shear Walls with Bed Joint Reinforcement.” 15th Canadian Masonry
Symposium, Ottawa, Ontario, Canada. |
|
|
[C146] |
Mahrous,
A., AbdelRahman, B., Galal, K., Bouaanani, N, and
Léger, P. (2025). “Evaluation and Quantification of Seismic Performance of
Reinforced Masonry Core Walls with Boundary Elements.” 15th
Canadian Masonry Symposium, Ottawa, Ontario, Canada. |
|
[C145] |
Aboziada, Y., AbdelRahman,
B., and Galal, K. (2025). “Evaluating Flexural Bond Strength in Mortarless Concrete Masonry.” 15th Canadian
Masonry Symposium, Ottawa, Ontario, Canada. |
|
[C144] |
Abdelrahman,
M., AbdelRahman, B., and Galal, K. (2025). “Effect
of vertical reinforcement on the in-plane shear strength of concrete masonry
walls.” 15th Canadian Masonry Symposium, Ottawa, Ontario, Canada. |
|
[C143] |
Mahrous,
A., AbdelRahman, B., and Galal, K. (2025).
“In-plane Cyclic Response of a Reinforced Masonry Core Wall with Boundary
Elements.” 15th Canadian Masonry Symposium, Ottawa, Ontario,
Canada. |
|
[C142] |
Aboziada, Y., AbdelRahman,
B., and Galal, K. (2025). “Comparative Study of the Mechanical Properties of
Dry Stack Interlocking Masonry and Conventional Block Masonry.” CSCE 11th
international Structures Specialty Conference, Winnipeg, Manitoba, Canada. |
|
[C141] |
Saleh,
A., Abdelrahman, M., AbdelRahman, B., and Galal, K.
(2025). “Experimental investigation on the compressive strength of
Dry-Stacked Interlocking Masonry panels.” CSCE 11th international
Structures Specialty Conference, Winnipeg, Manitoba, Canada. |
|
[C140] |
Abdelrahman,
M., AbdelRahman, B., and Galal, K. (2025).
“Experimental study on the compressive and shear strengths of Dry-Stacked
Interlocking Masonry.” CSCE 11th international Structures
Specialty Conference, Winnipeg, Manitoba, Canada. |
|
[C139] |
Farag, A., AbdelRahman,
B., and Galal, K. (2025). “Numerical Investigation into the Flexural
Performance of Steel- and GFRP-Reinforced Geopolymer
Concrete Beams.” ACMBS 9th International
Conference, Winnipeg, Manitoba, Canada. |
|
[C138] |
Abdallah,
M., AbdelRahman, B., and Galal, K. (2025). “Shear
Capacity of Concrete Interfaces Reinforced by GFRP Shear Friction
Reinforcement.” ACMBS 9th International
Conference, Winnipeg, Manitoba, Canada. |
|
[C137] |
Shabani,
H., Habibi, O., Asadian, A., and Galal, K. (2024). “Crack Monitoring in
GFRP-Reinforced Concrete Beams Using Digital Image Correlation.” CSCE 10th
international Structures Specialty Conference, Niagara Falls, Ontario,
Canada. |
|
[C136] |
Aboziada, Y., AbdelRahman,
M., AbdelRahman, B., and Galal, K. (2024).
“Behaviour of dry-stacked interlocking masonry: state of the art.” CSCE 10th
international Structures Specialty Conference, Niagara Falls, Ontario,
Canada. |
|
[C135] |
Mossa,
R., AbdelRahman, B., and Galal, K. (2024).
“Numerical Assessment of the Collapse Probability of Partially and Fully
Grouted Rectangular Reinforced Masonry Shear Walls.” CSCE 10th
international Structures Specialty Conference, Niagara Falls, Ontario,
Canada. |
|
[C134] |
Habibi,
O., AbdelRahman, M., AbdelRahman,
B., and Galal, K. (2024). “Predictive Machine Learning Models for
GFRP-Concrete Bond Strength.” CSCE 10th international Structures
Specialty Conference, Niagara Falls, Ontario, Canada. |
|
[C133] |
Habibi,
O., Shabani, H., and Galal, K. (2024). “Effect of transverse reinforcement on
bond strength of ribbed GFRP rebars in concrete.” CSCE 10th
international Structures Specialty Conference, Niagara Falls, Ontario,
Canada. |
|
[C132] |
Abdelrahman,
M., Abdelrahman, B., Habibi, O., and Galal, K. (2024). “Experimental study on
the compressive and diagonal tensile strengths of full-scale concrete
masonry.” CSCE 10th international Structures Specialty Conference,
Niagara Falls, Ontario, Canada. |
|
[C131] |
Al-Ahdal,
A., AbdelRahman, B., and Galal, K. (2024).
“Experimental comparison of the cyclic response of fully grouted and
partially grouted masonry walls.” CSCE 10th international
Structures Specialty Conference, Niagara Falls, Ontario, Canada. |
|
[C130] |
Elsayed
Nagy I., Asadian A., and Galal K. (2024). “The Behaviour of Ribbed GFRP
Reinforced Concrete Beam Under Fatigue.” CSCE 10th international
Structures Specialty Conference, Niagara Falls, Ontario, Canada. |
|
[C129] |
Elsayed
Nagy I., Asadian A. Galal K. (2023). “Low-Cyclic Tension-Tension Fatigue Behaviour
of GFRP Reinforcing Bars.” CSCE 9th international Structures
Specialty Conference, Moncton, New Brunswick, Canada. |
|
[C128] |
Habibi,
O., Shabani, H., Asadian, A., and Galal, K. (2023). “Bond‒slip
behaviour and pullout capacity of bundled ribbed GFRP rebars in concrete.”
CSCE 9th international Structures Specialty Conference, Moncton,
New Brunswick, Canada. |
|
[C127] |
Ibrahim
M, Asadian A, Galal K. (2023). “Flexural and Serviceability Behaviour of Steel,
GFRP, and Steel-GFRP Hybrid Reinforced Beams.” CSCE 9th
international Structures Specialty Conference, Moncton, New Brunswick,
Canada. |
|
[C126] |
Shabani,
H., Habibi, O., Asadian, A., and Galal, K. (2023). “Cracking Behaviour of
Concrete Tensile Members Reinforced with Ribbed GFRP rebars.” CSCE 9th
international Structures Specialty Conference, Moncton, New Brunswick,
Canada. |
|
[C125] |
Mahrous,
A., AbdelRahman, B., and Galal, K. (2023). “Seismic
Performance Assessment of Reinforced Masonry Core Walls with Boundary
Elements.” CSCE 9th international Structures Specialty Conference,
Moncton, New Brunswick, Canada. |
|
[C124] |
AbdAllah,
A., AbdelRahman, B., and Galal, K. (2023).
“Numerical Investigation of the Seismic Performance of Fully Grouted
Reinforced Masonry Shear Walls with Boundary Elements Subjected to Dynamic
Loading.” CSCE 9th international Structures Specialty Conference,
Moncton, New Brunswick, Canada. |
|
[C123] |
Al-Ahdal,
A., AbdelRahman, B. and Galal K. (2023).
“Experimental investigation of the mechanical properties of stretcher and
C-shaped masonry prisms under axial compression loading.” CSCE 9th
international Structures Specialty Conference, Moncton, New Brunswick,
Canada. |
|
[C122] |
Elmeligy,
O., AbdelRahman, B. and Galal K. (2023). “Numerical
Investigation of The Effect of the Seismic Design Provisions on the Response
of Flexural-Dominated Partially Grouted Reinforced Masonry Shear Walls.” CSCE
9th international Structures Specialty Conference, Moncton, New
Brunswick, Canada. |
|
[C121] |
Mossa,
R., AbdelRahman, B. and Galal K. (2023). “Numerical
Modelling of Fully Grouted Reinforced Concrete Masonry Shear Walls using
Finite and Applied Element Methods.” CSCE 9th international
Structures Specialty Conference, Moncton, New Brunswick, Canada. |
|
[C120] |
Shabani,
H., Asadian, A., Youssef, T., and Galal K. (2023). “Implementation of Digital
Image Correlation to Measure Deflection of a GFRP Reinforced Concrete Beam.”
International Conference on Advances in Structural and Geotechnical
Engineering, Hurghada, Egypt. |
|
[C119] |
Elsayed
Nagy, I., Asadian A., and Galal K. (2023). “Fatigue of Glass Fibre-Reinforced
Polymer Rebars: A Review.” 1st Advanced Topics in Mechanics of
Materials, Structures and Construction, AToMech1, Khobar, Saudi Arabia. |
|
[C118] |
Ibrahim
M, Asadian A, Galal K. (2022). “An Analytical Study on Steel-GFRP Hybrid
Reinforced Concrete One-way Slab Sections,” 11th International
Conference on Short and Medium Span Bridges, Toronto, Ontario, Canada |
|
[C117] |
Shabani,
H., Asadian, A., and Galal K. (2022). “A Review of Available Equations for
Predicting Crack Width of Flexural GFRP Reinforced Concrete Structures.” 11th
International Conference on Structural Health Monitoring of Intelligent
Infrastructure, Montreal, Quebec, Canada. |
|
[C116] |
Al-Ahdal,
A., Aly, N., and Galal K. (2022). “Behaviour of Flexural-Dominated Partially
Grouted Reinforced Masonry Shear Walls.” 11th International
Conference on Structural Health Monitoring of Intelligent Infrastructure,
Montreal, Quebec, Canada. |
|
[C115] |
Elsayed
Nagy I., Asadian A., and Galal K. (2022). “Stiffness Degradation of GFRP
Reinforced Concrete Beam Under High-Cyclic Fatigue Loading.” 11th
International Conference on Structural Health Monitoring of Intelligent
Infrastructure, Montreal, Quebec, Canada. |
|
[C114] |
Elmeligy,
O., Aly, N., AbdelRahman, B. and Galal K. (2022).
“Cyclic Response Prediction of Partially Grouted Reinforced Masonry Shear
Walls Using Numerical Simulation.” 11th International Conference
on Structural Health Monitoring of Intelligent Infrastructure, Montreal,
Quebec, Canada. |
|
[C113] |
Hamzeh,
H., Hassanein, A., and Galal K. (2021). “Seismic response of GFRP-Reinforced
Masonry Shear Walls with Boundary Elements.” 14th Canadian Masonry
Symposium, Montreal, Quebec, Canada. |
|
[C112] |
AbdelRahman, B., and Galal K. (2021). “Sensitivity of
the seismic response of fully grouted reinforced masonry shear walls with
boundary elements to design parameters.” 14th Canadian Masonry
Symposium, Montreal, Quebec, Canada. |
|
[C111] |
Gouda,
M., Hassanein, A., and Galal K. (2021). “Performance Masonry Prisms Filled
with Glass Fibre-Reinforced Grout.” 14th Canadian Masonry
Symposium, Montreal, Quebec, Canada. |
|
[C110] |
Hosseinzadeh,
S., and Galal K. (2021). “Improving the Seismic Behaviour of Reinforced
Masonry Shear Walls Using Dual Plastic Hinge Design.” 14th
Canadian Masonry Symposium, Montreal, Quebec, Canada. |
|
[C109] |
Hosseinzadeh,
S., and Galal K. (2021). “Probabilistic Resilience Quantification of
Reinforced Masonry Shear Wall System.” 14th Canadian Masonry
Symposium, Montreal, Quebec, Canada. |
|
[C108] |
Al-Ahdal, A., Aly, N., and Galal K. (2021).
“An Analytical Model for Shear-Dominated Partially Grouted Reinforced Masonry
Shear Walls.” 14th Canadian Masonry Symposium, Montreal, Quebec,
Canada. |
|
[C107] |
El-Sokkary,
H., and Galal K. (2021). “Economy of Reinforced Masonry versus Reinforced
Concrete Shear Wall Construction.” 14th Canadian Masonry
Symposium, Montreal, Quebec, Canada. |
|
[C106] |
Alotaibi,
K. S., and Galal K. (2021). “Machine Learning Techniques for Predicting Compression
Strength of Masonry Prism.” 14th Canadian Masonry Symposium,
Montreal, Quebec, Canada. |
|
[C105] |
Aly,
N., and Galal K. (2021). “Seismic Response Parameters of Ductile Reinforced
Concrete Masonry Shear Walls with Boundary Elements.” 14th
Canadian Masonry Symposium, Montreal, Quebec, Canada. |
|
[C104] |
Aly,
N., and Galal K. (2021). “Feasibility of Reinforced Concrete Masonry Shear
walls with Masonry Boundary Elements in High-Rise Buildings.” 14th
Canadian Masonry Symposium, Montreal, Quebec, Canada. |
|
[C103] |
Elmeligy,
O., Aly, N., and Galal K. (2021). “Effect of Aspect Ratio on Sensitivity
Analysis of a Simplified Micro- Model for Partially Grouted Reinforced
Masonry Shear Walls.” 14th Canadian Masonry Symposium, Montreal,
Quebec, Canada. |
|
[C102] |
Zorainy, M., Ashour, A., and Galal K.
(2021). “Compressive Stress-strain Behaviour of Unreinforced Masonry Boundary
Element Prisms Constructed with C-shaped Blocks.” 14th Canadian
Masonry Symposium, Montreal, Quebec, Canada. |
|
[C101] |
Albutainy
M., Galal K. (2019). “Ductility of Reinforced Masonry Shear Walls with
C-Shaped Boundary Elements.” 12th Canadian Conference on Earthquake
Engineering, Quebec City, Canada, 10 pages. |
|
[C100] |
Aly
N., Galal K. (2019). “Axial Load Effect on the Seismic Response of Reinforced
Masonry Shear Walls with Boundary Elements.” 12th Canadian Conference on
Earthquake Engineering, Quebec City, Canada, 10 pages. |
|
[C99] |
Albutainy
M., Galal K. (2019). “Preliminary Test Results of Seismic Response of Reinforced
Concrete Masonry Shear Walls with C-Shape Block Boundary Element.” 13th North
American Masonry Conference. Salt Lake City, Utah, United States. |
|
[C98] |
Aly
N., Galal K. (2019). “Influence of Ductile Shear Wall Ratio on the Seismic
Performance of Reinforced Concrete Masonry Shear Wall Buildings.” 13th North
American Masonry Conference, Salt Lake City, Utah, United States. |
|
[C97] |
Hosseinzadeh
S., Galal K. (2019). “Enhancing the Seismic Resilience of Reinforced Masonry
Shear Wall Building using Boundary Elements.” 12th Canadian Conference on
Earthquake Engineering, Quebec City, Canada. |
|
[C96] |
Aly
N., Galal K. (2019). “Effect of Shear Span-to-Depth Ratio on the Seismic
Performance of Reinforced Concrete Masonry Structural Walls with Boundary
Elements.” Canadian Society of Civil Engineering (CSCE) Annual Conference,
Laval, Montreal, Canada, 9 pages. |
|
[C95] |
Albutainy
M., Galal K. (2019). “Effect of Changing Boundary Element Size on the
Response of Reinforced Concrete Masonry Shear Walls with C-Shape Boundary
Element.” Canadian Society of Civil Engineering (CSCE) Annual Conference,
Laval, Montreal, Canada, 10 pages. |
|
[C94] |
Zorainy
M., Ashour A., Galal k. (2018). “Comparing Canadian and American Standards
Requirements for Evaluating Masonry Compressive Strength.” 5th International
Conference on Structural and Geotechnical Engineering: Advances in
Construction Techniques, Cairo, Egypt. |
|
[C93] |
Aly
N., Galal K. (2018) “Height Limits of Ductile Reinforced Concrete Masonry
Shear Wall Buildings.” 15th International Conference on Structural and
Geotechnical Engineering: Advances in Construction Techniques, Cairo, Egypt. |
|
[C92] |
Albutainy
M., Galal K. (2018) “Response of Reinforced Concrete Masonry Shear Walls with
C-shape Boundary Element.” 15th International Conference on Structural and
Geotechnical Engineering: Advances in Construction Techniques, Cairo, Egypt. |
|
[C91] |
El-Sokkary
H., Galal K. (2018) “Material Quantities of Reinforced Masonry Versus
Reinforced Concrete Shear Walls.” 15th International Conference on Structural
and Geotechnical Engineering: Advances in Construction Techniques, Cairo,
Egypt. |
|
[C90] |
El
Aghoury, I., and Galal, K. (2018) “Cost-Based Cross-section Optimization of
U-Tub and Multi-cellular Box Precast Prestressed Concrete Single Track
Railway Bridges.” The 10th International Conference on Short and Medium Span
Bridge, Quebec City, Canada, 10 pages. |
|
[C89] |
Hamzeh,
L., Ashour, A., and Galal, K. (2017) “Effect of changing vertical
reinforcement ratio and level of axial stress on the lateral response of
reinforced masonry shear walls with boundary elements.” 13th
Canadian Masonry Symposium, Halifax, Canada, 11 pages. |
|
[C88] |
Aly, N., Ashour, A., and Galal, K. (2017)
“Seismic performance and height limits of ductile reinforced masonry shear
wall buildings with boundary elements.” 13th Canadian Masonry
Symposium, Halifax, Canada, 11 pages. |
|
[C87] |
Hosseinzadeh,
S., Ashour, A., Aly, N., and Galal, K. (2017) “Seismic collapse evaluation of
reinforced masonry core wall systems.” 13th Canadian Masonry
Symposium, Halifax, Canada, 11 pages. |
|
[C86] |
Albutainy,
M., Ashour, A., and Galal, K. (2017) “Effect of boundary elements confinement
level on the behaviour of reinforced masonry structural walls with boundary
elements.” 13th Canadian Masonry Symposium, Halifax, Canada,
11 pages. |
|
[C85] |
Arabzadeh H., Goguen
K., Pelletier K., Bouaanani N., Galal K., Léger P. (2017). “Evaluation of Finite and Fiber Elements
RC Models for Nonlinear Cyclic Analysis of U-Shaped Shear Wall.” 16th World
Conference on Earthquake, Santiago, Chile. |
|
[C84] |
Ashour, A., and Galal, K. (2017) “Load-displacement backbone
model for flexure-dominated reinforced masonry shear walls.” 13th Canadian
Masonry Symposium, Halifax, Canada, 11 pages. |
|
[C83] |
Galal, K. (2017). “New generation of sustainable and resilient
reinforced masonry buildings.” Press Conference, The l'Association
des entrepreneurs en maçonnerie du Québec (AEMQ), Montréal, Québec, Canada. Video-1: Construction
of reinforced masonry shear walls with boundary elements. Video-2: Concept
of tall buildings constructed with reinforced masonry walls and concrete
slabs. Video-3: Testing
reinforced masonry shear walls subjected to earthquake effects. |
|
[C82] |
Ahmed,
S., and Galal, K. (2016). “Energy dissipation capacity of FRP sandwich panels
subjected to blast loads”. The 7th International Conference on
Advanced Composite Materials in Bridges and Structures (ACMBS-VI),
Vancouver, Canada, 6 pages. |
|
[C81] |
Alotaibi, K., Abo ElEzz,
A., and Galal, K. (2016). “Strengthening of concrete block masonry columns
with FRP”. The 7th International Conference on Advanced Composite
Materials in Bridges and Structures (ACMBS-VI),
Vancouver, Canada, 6 pages. |
|
[C80] |
Galal,K. (2016). “FRP Retrofitting of Bridges.” The Second International Conference on Infrastructure
Management, Assessment and Rehabilitation Techniques, Sharjah, UAE. |
|
[C79] |
Seif
ElDin, M., and Galal, K. (2015). “Influence of axial compression stress on
the in-plane shear performance of reinforced masonry shear walls.” 11th Canadian
Conference on Earthquake Engineering, Victoria, BC, Canada. |
|
[C78] |
Hamzeh, L., Abo ElEzz,
A., and Galal, K. (2015). “Numerical simulation of the seismic behavior of
reinforced concrete masonry structural walls.” 11th Canadian Conference on Earthquake
Engineering, Victoria, BC, Canada. |
|
[C77] |
Obaidat,
A., Abo ElEzz, A., and Galal, K. (2015).
“Evaluation of the compression behaviour of confined boundary elements in
ductile reinforced concrete block masonry structural walls”. 11th Canadian
Conference on Earthquake Engineering, Victoria, BC, Canada. |
|
[C76] |
El-Sokkary,
H., and Galal, K. (2015). “Seismic performance evaluation of RC shear walls
with various ductility levels”. 11th Canadian Conference on
Earthquake Engineering, Victoria, BC, Canada. |
|
[C75] |
Arabzadeh,
H., and Galal, K. (2015). “Effectiveness of FRP wraps for retrofitting of
existing RC shear walls”. 11th Canadian Conference on Earthquake
Engineering, Victoria, BC, Canada. |
|
[C74] |
Seif
ElDin, M., and Galal, K. (2015). “In-plane shear behavior of fully grouted
reinforced masonry shear walls”. 12th North American Masonry
Conference, Denver, Colorado, USA. |
|
[C73] |
Seif
ElDin, M., AlButainy, M., and Galal, K. (2015).
“Parametric study to investigate the shear behavior of reinforced masonry
shear walls”. 12th North American Masonry Conference, Denver,
Colorado, USA. |
|
[C72] |
Abo ElEzz, A.,
Seif ElDin, H., and Galal, K. (2015). “Experimental investigation on confined
concrete block masonry boundary element columns”. 12th North
American Masonry Conference, Denver, Colorado, USA. |
|
[C71] |
Seif
ElDin, M., and Galal, K. (2015). “Survey of the design equations for in-plane
shear capacity of reinforced masonry shear walls”. 12th North
American Masonry Conference, Denver, Colorado, USA. |
|
[C70] |
Ali,
A., Abdalla, J., Hawileh, R., and Galal, K. (2014).
“CFRP mechanical anchorage for externally strengthened RC beams under
flexure,” Physics Procedia, 55, 10-16. |
|
[C69] |
Abo ElEzz, A.,
Seif ElDin, H., and Galal, K. (2014). “Stress-strain relationship for
concrete block masonry boundary element columns”. 9th
International Masonry Conference, Guimarães,
Portugal, 10p. |
|
[C68] |
Rezaiefar,
A., ElAghoury, I., and Galal, K. (2014). “Vibration
of rectangular sectioned industrial duct walls”. 4th International
Structural Specialty Conference, Halifax, Canada, 10p. Seif ElDin, H., ElAghoury, I., and Galal, K. (2014). “Experimental and
parametric study to investigate the flexural capacity of deteriorated steel
girders”. 4th International Structural Specialty Conference,
Halifax, Canada, 10p. |
|
[C67] |
Seif
ElDin, H., ElAghoury, I., and Galal, K. (2014).
“Experimental and parametric study to investigate the flexural capacity of
deteriorated steel girders”. 4th International Structural
Specialty Conference, Halifax, Canada, 10p. |
|
[C66] |
Elsharawy,
M., Stathopoulos, T., and Galal, K. (2013). “Wind tunnel study on load
combinations including torsion for design of medium-rise buildings,” The
Eighth Asia-Pacific Conference on Wind Engineering APCWE,
Chennai, India, 10p. |
|
[C65] |
Elsharawy,
M., Stathopoulos, T., and Galal, K. (2013), “Wind load combinations including
torsion for medium-rise buildings,” European-African Conference on Wind
Engineering EACWE, Cambridge, England, 10p. |
|
[C64] |
Mirvalad,
S.J. and Galal, K. (2013). “Effect of retrofit
method on mitigating progressive collapse of tall steel frame structure,” 3rd
Specialty Conference on Disaster Prevention and Mitigation, Montréal, Canada,
10p. |
|
[C63] |
ElSharawy, M., Galal, K., and Stathopoulos, T.
(2013). “Comparison of wind tunnel results with Canadian wind-induced torsion
provisions for low- and medium-rise buildings,” 3rd Specialty Conference on
Disaster Prevention and Mitigation, Montréal, Canada, 10p. Second Best
Student Paper Award. |
|
[C62] |
Rezaiefar, A. and Galal, K. (2013).
“Numerical modeling of the cyclically loaded FRP-retrofitted RC shear walls,”
3rd Specialty Conference on Disaster Prevention and Mitigation, Montréal,
Canada, 10p. |
|
[C61] |
ElSokkary, H. and Galal, K. (2013). “Cyclic Loading
Tests on FRP-Retrofitted RC Shear Walls,” 3rd Specialty Conference on
Disaster Prevention and Mitigation, Montréal, Canada, 10p. |
|
[C60] |
ElSawy, T. and Galal, K. (2013). “Increasing the
progressive collapse resistance of steel moment resisting frame buildings,”
3rd Specialty Conference on Disaster Prevention and Mitigation, Montréal,
Canada, 10p. |
|
[C59] |
Yagoub, O., Galal, K., and Naumoski,
N. (2013). “Mitigating progressive collapse of RC buildings with shear walls and
flat slab system,” 3rd Specialty Conference on Disaster Prevention and
Mitigation, Montréal, Canada, 10p. |
|
[C58] |
Yagoub, O., Galal, K., and Naumoski,
N. (2013). “Effect of building bay span on the vulnerability of RC shear wall
buildings to progressive collapse,” 3rd Specialty Conference on Disaster
Prevention and Mitigation, Montréal, Canada, 10p. |
|
[C57] |
ElAghoury, I., Galal, K., and ElAghoury,
M. (2013). “Towards a corrosion-fatigue strain-life model for steel beams in
corrosive environments,” 3rd Specialty Conference on Material Engineering
& Applied Mechanics, Montréal, Canada, 10p. |
|
[C56] |
Elshamrany, O., Alkass, S., and Galal, K. (2013).
“Development of Initial Costs Forecasting Models for School Buildings using
Multiple Linear Regression,” 4th Construction Specialty Conference, Montréal,
Canada, 10p. |
|
[C55] |
Elshamrany, O., Galal, K., and Alkass, S. (2013).
“Evaluation of Selection Criteria for School Buildings in Canada using AHP and MAU,” 4th Construction Specialty Conference,
Montréal, Canada, 10p. |
|
[C54] |
Lin,
L., and Galal, K. (2013). “On the use of spectrum-compatible seismic
excitations in the design of reinforced concrete buildings,” 15th World
Conference on Earthquake Engineering, Lisboa,
Portugal, 10p. |
|
[C53] |
Chen,
Y., Athienitis, A.K., Galal, K. (2012). “Thermal
modeling for ventilated structural components using frequency response and
finite difference methods and comparison with experimental data,” eSim conference, Halifax, Canada, 10p. |
|
[C52] |
ElSharawy, M., Stathopoulos, T., and Galal, K.
(2012). “Wind-induced torsional aerodynamic loads on low- and medium-height
buildings,” Seventh International Colloquium on Bluff Body Aerodynamics &
Applications, Shanghai, China, 10p. |
|
[C51] |
Mirvalad,
S.J. and Galal, K. (2012). “Effect of seismic
design level and building height on the robustness of steel frame structures
prone to progressive collapse,” 3rd International Structural Specialty
Conference, Edmonton, Canada, 11 pages. |
|
[C50] |
Yagob, O., Galal, K., and Naumoski, N. (2012). “Estimation of progressive collapse
potential for shear wall buildings,” 3rd International Structural Specialty
Conf., Edmonton, Canada, 11 pages. |
|
[C49] |
Rezaiefar, A., and Galal, K. (2012).
“Numerical modelling of reinforced concrete structural walls rehabilitated
with FRP composites” The 6th International Conference on Advanced Composite
Materials in Bridges and Structures (ACMBS-VI),
Kingston, Canada, 11 pages. |
|
[C48] |
Farnia, N., and Galal, K. (2012). “Upgrading the
seismic performance of reinforced concrete masonry columns using CFRP and
GFRP wraps,” The 6th Int. Conference on Advanced Composite Materials in
Bridges and Structures (ACMBS-VI), Kingston,
Canada, 11 pages. |
|
[C47] |
El-Sokkary,
H., Galal, K., Ghorbanirenani, I, Tremblay, R.,
Léger, P, and Leclerc, M. (2012). “Shake table tests on FRP rehabilitated RC
shear walls,” The 6th Int. Conference on Advanced Composite Materials in
Bridges and Structures (ACMBS-VI), Kingston,
Canada, 11 pages. |
|
[C46] |
ElSharawy, M., Galal, K and Stathopoulos, T., (2011).
“Wind-Induced Torsional Loads on Low-Rise Buildings: Effect of Geometrical
Variables.” Canadian Society of Civil Engineering (CSCE) Annual Conference,
Ottawa, Canada, 10 pages. |
|
[C45] |
ElSharawy, M., Stathopoulos, T., and Galal, K.
(2011). “Wind-Induced Torsional Loads on Low Buildings,” 13th International
Conference on Wind Engineering, Amsterdam, Netherlands. |
|
[C44] |
Yagoub, O., Galal, K., and Naumoski,
N. (2011). “Progressive collapse analysis of RC shear wall buildings,” Canadian
Society for Civil Engineering Conference, Ottawa, Canada, 10 pages. |
|
[C43] |
Azimi
H., Galal, K., and Pekau, O.A. (2011). “Effect of
Shear Deformations on the Bridge Response in the Vehicle-Bridge Interaction Dynamic
Analysis”, Canadian Society for Civil Engineering Conference, Ottawa, Canada,
10 pages. |
|
[C42] |
ElSharawy, M., Stathopoulos, T., Galal, K. (2011).
“Evaluation of wind-induced torsional loads on buildings by North American and
European codes and standards.” The 2011 ASCE/SEI
Structures Congress, Las Vegas, Nevada, USA, 10 pages. |
|
[C41] |
ElSharawy, M., Galal, K., and Stathopoulos, T.,
(2011). “Wind-induced torsional loads on low-rise buildings.” The 2011 ASCE/SEI Structures Congress, Las Vegas, Nevada, USA, 10
pages. |
|
[C40] |
AlShamrani, O., Galal, K., and Alkass, S. (2011).
“Evaluation of School Buildings Using Sustainability Measures and Life-Cycle
Costing Technique”, The International Conference on Sustainable Systems and
the Environment ISSE 2011, AUS,
Sharjah, UAE. 10 pages. |
|
[C39] |
AlShamrani, O., Alkass, S., Galal, K. (2011).
“Incorporating LCA into LEED® in Evaluation of
Structures and Building Envelopes”, The International Conference on
Sustainable Systems and the Environment ISSE 2011, AUS, Sharjah, UAE. 10 pages. |
|
[C38] |
AlShamrani, O., Alkass, S., Galal, K. (2011).
“Incorporating LCA into LEED® in Evaluation of
Structures and Building Envelopes”, The International Conference on
Sustainable Systems and the Environment ISSE 2011, AUS, Sharjah, UAE. 10 pages. |
|
[C37] |
Enginsal,
M.A., and Galal, K. (2010). “Flexural Behaviour of FRP-Reinforced Concrete
Masonry Beams,” 8th International Masonry Conference, Dresden, Germany, 10
pages. |
|
[C36] |
ElTahan, M., Hoa, S.V.,
and Galal, K. (2010). “Mechanical characteristics of new thermoplastic CFRP
rebars for reinforcing concrete elements”, 8th International Conference on
Short and Medium Span Bridges, Niagara Falls, Canada, 10 pages. |
|
[C35] |
ElAghoury, I., and Galal, K. (2010). “Towards a
Numerical Tool for Fatigue Life Prediction of Corroded Steel Members”, 8th
Int. Conf. on Short and Medium Span Bridges, Niagara, Canada. |
|
[C34] |
Azimi,
H., Galal, K., and Pekau, O.A. (2010). “A Modified
2-d Element for Vehicle-Bridge Interaction Analysis for Vehicles with
Constant Velocity”, 8th International Conference on Short and Medium Span
Bridges, Niagara Falls, Canada, 10 pages. |
|
[C33] |
Naimi,
M., and Galal, K. (2010). “3-D seismic analysis of bridge including
soil-structure interaction when subjected to near fault earthquakes”, 8th
International Conference on Short and Medium Span Bridges, Niagara Falls,
Canada, 10 pages. |
|
[C32] |
Seif
ElDin, H., Galal, K., and Tirca, L. (2010). “Applications of CFRP in
retrofitting existing steel girders in flexural behaviour”, 8th Intl. Conf.
on Short and Medium Span Bridges, Canada. |
|
[C31] |
Farnia, N., Galal, K., and Pekau, O.A. (2010). “Seismic rehabilitation of reinforced
masonry columns using CFRP sheets”, 9th US National and 10th Canadian
Conference on Earthquake Engineering, Toronto, Canada, 10 pages. |
|
[C30] |
Ghorbanirenani, I., Tremblay, R., El-Sokkary, H., Galal,
K., Léger, P., and Leclerc, M. (2010). “Shake table tests and repair of
ductile slender reinforced concrete shear walls”, 9th US National and 10th
Canadian Conference on Earthquake Engineering, Toronto, Canada, 10 pages. |
|
[C29] |
Alshamrani, O., Alkass, S., and Galal, K. (2010).
“Energy consumption reduction in school buildings in Kingdom of Saudi
Arabia”, International Engineering Conference on Hot Arid Regions (IECHAR 2010), Al-Ahsa, KSA, 6 pages. |
|
[C28] |
Torkan, B., Bagchi, A., and Galal, K. (2010).
“Development of a Protection Mechanism for Fibre Optic Sensors in Monitoring
Reinforced Concrete Structures,” Canadian Society for Civil Engineering
Conference, Winnipeg, Canada, 10 pages. |
|
[C27] |
Farnia, N., and Galal, K. (2009). “Upgrading the
seismic performance of reinforced masonry columns using CFRP wraps.” 11th
Canadian Masonry Symposium, Toronto, Canada, 10 pages. First Honorable
Mention “M.A. Hatzinikolas Best Paper Award”. |
|
[C26] |
Sasanian,
N., and Galal, K. (2009). “Flexural performance of FRP-reinforced masonry
walls.” 11th Canadian Masonry Symposium, Toronto, Canada, 10 pages. |
|
[C25] |
El-Sokkary, H., and Galal, K. (2009). “A
survey on masonry lateral force resisting systems: codes vs. Research
perspective,” 11th Canadian Masonry Symposium, Toronto, Canada, 8 pages. |
|
[C24] |
Galal, K. (2009). “Development of innovative
hybrid FRP / ductile anchor retrofit systems for fast retrofit of bridges.”
Fyfe Group Annual International Convention, San Diego, United States. |
|
[C23] |
El-Sokkary,
H., and Galal, K. (2008). “Recent advancement in modeling of RC shear walls.”
14th World Conference on Earthquake Engineering, Beijing, China, 12 pages. |
|
[C22] |
El-Sokkary,
H., and Galal, K. (2008). “Recent advancement in rehabilitation of RC walls.”
14th World Conference on Earthquake Engineering, Beijing, China, 13 pages. |
|
[C21] |
Tremblay,
R., Ghorbanirenani, I., Velev,
N., Leger, P., Leclerc, M., Koboevic, S.,
Bouaanani, N., Galal, K., and Palermo, D. (2008). “Seismic response of multi-storey reinforced concrete walls subjected to eastern
North America high frequency ground motions,” 14th World Conference on
Earthquake Engineering, Beijing, China, 8 pages. |
|
[C20] |
Mofidi,
A., and Galal, K. (2008). “Strengthening RC T-Beams in Flexure and Shear
using new Mechanically-Anchored FRP and dry Fibre Systems.” 2nd Canadian
Conference on Effective Design of Structures, Hamilton, Canada, 10 pages. |
|
[C19] |
Chen,
Y., Athienitis, A.K., and Galal, K. (2008).
“Modelling and performance of a solar demonstration house with integrated
storage and BIPV/T System,” Eurosun
Conference, Lisbon, Portugal, 10p. |
|
[C18] |
Chen,
Y., Athienitis, A.K., Park, K-W, and Galal, K.
(2008). “Design, thermal performance and modeling of a ventilated concrete
slab coupled with BIPV/T system,” The 33rd Annual Conference of the Solar Energy
Society of Canada and 3rd Canadian Solar Research Network Conference,
Fredericton, Canada, 8p. |
|
[C17] |
Chen,
Y., Athienitis, A.K., O’Neill, B., and Galal, K.
(2008). “Design & Thermal Performance of a Solar House with BIPV/T System, Thermal Storage & Passive Solar
Heating”, American Solar Energy Society (ASES), San Diego, USA. |
|
[C16] |
Chen,
Y., Athienitis, A., Galal, K., and Poissant, Y.
(2007). “Design and simulation for a solar house with building integrated
photovoltaic-thermal system and thermal storage.” ISES
Solar World Congress, Beijing, China, 4 pages. |
|
[C15] |
El-Sokkary,
H., and Galal, K. (2007). “Effect of FRP-confinement rehabilitation pattern
on the seismic performance of nominally ductile existing RC frame
structures.” 9th Canadian Conference on Earthquake Engineering,
Ottawa, 10 pp. |
|
[C14] |
El-Sokkary,
H., and Galal, K. (2007). “Upgrading the seismic performance of existing
masonry-infilled RC frames using FRP bracing.” 9th Canadian Conf.
on Earthquake Engineering, Ottawa, 10 pages. |
|
[C13] |
Naimi,
M., and Galal, K. (2007). “Nonlinear dynamic behaviour of RC tall structures
subjected to near-fault earthquakes including soil structure interaction.” 9th
Canadian Conference on Earthquake Engineering, Ottawa, 10 pages. |
|
[C12] |
Chen,
Y., Athienitis, A.K., and Galal, K. (2007). “Design
and Simulation of a Building-Integrated Photovoltaic-Thermal System and
Thermal Storage for a Solar House,” 32nd Annual Conference of the Solar
Energy Society of Canada, Calgary, Canada, 10p. |
|
[C11] |
Galal,
K. and Sekar, M. (2006). “Effect of design
variables on the failure mechanisms of FRP-rehabilitated RC inverted T-beam
bridge bentcaps.” 7th International
Conference on Short & Medium Span Bridges, Montréal, 10 pages. |
|
[C10] |
Galal,
K. and Sekar, M. (2006). “Strengthening of RC
inverted T bentcap girders using anchored CFRP
sheets.” 7th Int. Conf. on Short & Medium Span Bridges,
Montréal, 10 pages. |
|
[C09] |
Galal,
K., Ghobarah, A., and Elgohary,
M. (2006). “Comparison of North-American codes' requirements for near-fault
earthquakes effects on nuclear structures.” 8th US National
Conference on Earthquake Engineering, NCEE, San
Francisco, 10 pages. |
|
[C08] |
Galal,
K. (2006). “Influence of design variables on the displacement ductility of
FRP-rehabilitated RC rectangular short columns.” 8th US NCEE, San Francisco, 10 pages. |
|
[C07] |
Galal,
K., and Ghobarah, A. (2004). “Shear capacity of
retrofitted rectangular RC short columns.” 13th World Conference
on Earthquake Engineering, Vancouver, 11 pages. |
|
[C06] |
Ghobarah, A., Galal, K., and Elgohary,
M. (2004). “Dynamic response of lightly reinforced concrete walls.” 13th
World Conference on Earthquake Engineering, Vancouver, 13 pages. |
|
[C05] |
Galal,
K., Ghobarah, A., Drysdale R.G., and Mosallam, A.
(2003). “Strengthening unreinforced masonry walls with openings for extreme
load.” Response of Structures to Extreme Loading Conference, Toronto, 8
pages. |
|
[C04] |
Ghobarah, A., and Galal, K. (2003). “Seismic
rehabilitation of square short columns.” Response of Structures to Extreme
Loading Conference, Toronto, 8 pages. |
|
[C03] |
Soliman, M.I., Fayad, A.S., Wahed, O.H., and Galal, K. (1998). “Response of continuous haunched RC girder type bridges with and without bottom
slab under coupled vertical loads,” The Eighth International Colloquium on
Structural and Geotechnical Engineering, ICSGE,
Cairo, Egypt, Vol. 1, pp. 1-12. |
|
[C02] |
Soliman,
M.I., Fayad, A.S., Wahed, O.H., and Galal, K.
(1997). “Effect of eccentric loading on R.C. haunched girder bridges with and without bottom slab,”
The Seventh International Conference on Computing in Civil and Building
Engineering, APCOM’97, Seoul, Korea Advanced Institute of Science, pp.
479-484. |
|
[C01] |
Soliman,
M.I., Fayad, A.S., Wahed, O.H., and Galal, K.
(1996). “Effect of bottom slab on the torsional behaviour of girder and
box-girder R.C. bridges,” 7th ICSGE, Vol. 2, pp.
297-312. |
Technical
Reports:
|
[R21] |
Galal
K., Asadian I. (2020). “Transverse shear strength of MST-BAR® as
per ASTM D7617” B&B FRP Manufacturing, Canada. |
|
[R20] |
Galal K.,
Asadian I. (2020). “Strength of the bent portion of MST-BAR® BEND
as per CSA S807-19” B&B FRP Manufacturing, Canada. |
|
[R19] |
Galal K., Asadian A. (2020). “Design of
tilt-up wall panels for lifting stresses using MST-BAR GFRP reinforcement.”
B&B FRP Manufacturing, Canada. |
|
[R18] |
Galal K., ElAghoury
I. (2018). “Rotational Stiffness for Simple Double Angle Shear Connections.”
SAFI Canada. |
|
[R17] |
Galal, K., and ElAghoury,
I. (2017). “Cost-based cross-section optimization of U-Tub and Multi-cellular
box precast pre- and post-tensioned concrete single track railway bridges,
Schokbeton, Canada |
|
[R16] |
Galal, K., and Ashour, A. (2017). “Testing of
thermal break connections,” L & K Thermal Break Corp., Canada. |
|
[R15] |
Galal, K., and Ashour, A. (2016). “Seismic
assessment and collapse evaluation of reinforced masonry core wall systems,” SBSA, Canada. |
|
[R14] |
Galal, K., and El-Sokkary, H. (2015).
“Effective seismic design of RC shear wall buildings with different ductility
levels,” Stantec Canada. |
|
[R13] |
Galal, K., and Abo El Ezz, A. (2015).
“Strengthening of concrete block masonry columns with fiber reinforced
polymer composites,” Sika Canada. |
|
[R12] |
Galal, K., and Rezaiefar, A. (2014).
“Vibration analysis of steel thin-walled industrial
ducts,” CADes Structures, Canada. |
|
[R11] |
Galal, K., and Abo El Ezz, A. (2014).
“Curvature ductility of reinforced masonry shear walls' confined boundary
elements,” Canadian Concrete Masonry Producers Associations CCMPA, Canada. |
|
[R10] |
Galal, K., and El-Aghoury, I. (2013).
“Structural design of large industrial ducts considering large deformations
and membrane actions,” BAH Inc., Canada. |
|
[R09] |
Galal, K., and El-Sokkary, H. (2012). “Dynamic
performance of two FRP-rehabilitated 8-storey RC shear walls tested on shake
table," Fyfe Co, California, USA. |
|
[R08] |
Galal, K., and El-Sokkary, H. (2012). “Cyclic
performance of three FRP-rehabilitated RC shear wall panels,” Fyfe Co,
California, USA. |
|
[R07] |
Galal, K (2011). “Design and detailing of a
new Strong Reaction Frame at the American University of Sharjah”, Department
of Civil Engineering, American university of Sharjah, United Arab Emirates. |
|
[R06] |
Ghobarah, A., and Galal, K. (2004). “Safety
implications of near-fault earthquakes on nuclear power plant structures,”
International Atomic Energy Agency (IAEA), contribution of Atomic Energy of
Canada Limited (AECL) and McMaster University. |
|
[R05] |
Ghobarah, A., and Galal, K. (2003) “Seismic behaviour
of RC walls: Benchmark CAMUS test,” International Atomic Energy Agency
(IAEA), contribution of Atomic Energy of Canada Limited (AECL)
and McMaster University. |
|
[R04] |
Ghobarah, A., and Galal, K. (2002) “Dynamic behaviour
of Welland ship canal bridge 6W,” St. Lawrence
Seaway Management Corporation, Ontario, Canada. |
|
[R03] |
Galal,
K. (2001) “Dynamic analysis of the pipes secondary system at the Mountainview power station manufactured by Foster Wheeler
Ltd.,” JNE Consulting Ltd., Hamilton, Ontario,
Canada. |
|
[R02] |
Ghobarah, A., and Galal, K. (2001) “Seismic analysis
of Brickyard Landing masonry chimney,” Brickyard Landing Owners Association,
Point Richmond, California, USA. |
|
[R01] |
Ghobarah, A., and Galal, K. (2000) “Design and detailing
of the 2D strong reaction wall at the Applied Dynamics Laboratory of McMaster
University,” Internal report, Department of Civil Engineering, McMaster
University, Ontario, Canada. |
Patents:
|
[P01] |
Co-inventor on a US non-provisional patent
number 12/105,522, entitled “Rebar Support System” and filed on 18 April
2008. The inventors are Francisco Garza and Mario Verdi (of 3gm Plastics
Inc.), and Khaled Galal. |