| |
|
Concept:
experiment: laboratory
| | | Related References | | |
- --------
- A precision weighing system for helping assess the hygrotherma response of full-scale wall assemblies, by Maref, W.M. Lacasse, M.A. and Krouglicof, N., 2001
- a boundary layer wind tunnel.
- A study of the rainscreen concept applied to cladding systems on wood frame walls, by Morrison Hershfield Limited, 1990
- dataset, benchmark
- An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data, by Talukdar, P., Olutmayin, S. O., Osanyintola, O. F. and Simonson, C. J., 2007
- digital-image-based models to microstructure
- Application of digital-image-based models to microstructure, transport properties, and degradation of cement-based materials, by Bentz, D. P., Garboczi, E. J. and Martys, N. S., 1996
- --------
- Approach for the simulation of wetting due to rain infiltration for building envelope testing, by St-Hilaire, A., Derome, D. and Fazio, P., 2003
- --------
- Assessing the performance of full-scale environmental chambers using an independently measured emissions source, by Chang, J. S., Nong, G., Mason, M. A., Howard, E. M. and Brown, S. K., 1999
- --------
- Behavior of wall assemblies with different wood sheathings wetted by simulated rain penetration, by Teasdale-st-hilaire, A., Derome, D. and Fazio, P., 0
- accelerated climatic strains
- Building materials and components in the vertical position: exposure to accelerated climatic strains, by Nordtest, 1993
- --------
- Deterioration patterns of building cladding components for maintenance management , by Shohet, I. M., Puterman, M. and Gilboa, E., 2002
- --------
- Drainage and Evaporation from Window Sill Trays, by Bassett, M., Mcneil, S., Bennett, J., 2009
- --------
- Drying capabilities of wood frame walls with wood siding, by Salonvaara, M. H., Ojanen, T., Kokko, E. and Karagiozis, A. N., 1998
- --------
- E2099-00, standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems, by ASTM, 2000
- --------
- Experimental investigation of the hygrothermal performance of insulation materials, by Hansen, K. K., Rode, C., and Hansen, E., 2001
- --------
- Experimental results for diffusion and infiltration of moisture in concrete masonry walls exposed to hot and humid climates, by Hosni, M. H., Sipes, J. M. and Wallis, M. H., 1999
- --------
- Experimental verification of a moisture and heat transfer model in the hygroscopic regime, by Burch, D.M., R.R. Zarr, and Fanney, A. H., 1995
- multiple small samples
- Integration of simplified drying tests and numerical simulation in moisture performance analysis of the building envelope, by Ojanen, T., Salonvaara, M. and Simonson, C. J., 2002
- --------
- Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study, by Vera, S., Fazio, P. and Rao, J., 2010
- trace moisture sources
- Isotopic analysis of moisture transport, by Gudmundsson, K., 2002
- --------
- Magnetic resonance imaging of moisture distribution in Pinus sylvestris L. exposed to daily indoor relative humidity fluctuations, by Hameury S. & Sterley M., 2006
- --------
- Measurements and two-dimensional computer simulations of the hygrothermal performance of a wood frame wall, by Geving, S., Karagiozis, A. and Salonvaara, M., 1997
- --------
- Measuring air leakage characteristics with flexible double air chambers, by Fazio, P., Rao, J., and Ge, H., 2002
- --------
- MEWS methodology for developing moisture management strategies: application to stucco-clad wood-frame walls in North America, by Beaulieu, P.; Cornick, S.M.; Dalgliesh, W.A.; Djebbar, R.; Kumaran, M.K.; Lacasse, M.A.; et al., 2001
- --------
- Moisture behavior of timber-framed external wall structures in Nordic climate, by Vinha, J.O., P. K?kel? and R. Lindberg, 2001
- Moisture in lightweight construction
- Moisture in constructions with loose-fill insulation and no vapour barrier, by Levin, P., 2000
- --------
- Moisture-buffering effect - experimental investigations and validation, by Holm, A. and Lengsfeld, K., 2007
- --------
- Performance evaluation protocol for full-scale wood-frame building envelopes , by Horvat, M., Fazio, P., 2003
- --------
- Report from Task 2 of MEWS Project - Description of 17 Large Sale Wall Specimens Built for Water Entry Investigation in IRC Dynamic Wall Testing Facility, by Bomberg, M., Rousseau, M., Desmarais, G., Nicholls, M. and Lacasse, M.K, 2002
- --------
- Report from task 6 of MEWS project -- experimental assessment of water penetration and entry into wood-frame wall specimens, - final report, by Lacasse, M. A., O'connor, T. J., Nunes, S. and Beaulieu., P., 2003
- --------
- Review and framework for large-scale laboratory studies on wetting and drying of building envelopes, by Fazio, P., Derome, D. and Rao, J., 2001
- --------
- Simulation and mock-up tests of the thermal performance of curtain walls, by No, S., Kim, K. and Jung, J., Bayer, J. A. and Clift, C. D., 2008
- statistical comparitive experiment with human
- Subjective perceptions, symptom intensity and performance: a comparison of two independent studies, both changing similarly the pollution load in an office , by Wargocki, L. L., Witterseh, T., Sundell, J., Wyon, D. P. and Fanger, P. O., 2002
- --------
- The self-drying concept for flat roofs, by Korsgaard, V., Rode, C. and Bunch-Nielsen, T., 1996
- --------
- Vapour diffusion control in framed wall systems insulated with spray polyurethane foam, by Smith, R. C., 2009
- --------
- Ventilation Measured in the Wall Cavities of High Moisture Risk Buildings , by Bassett, M., Mcneil, S., 2009
|
|
Environmental chamber of BCEE Concordia