Conceptual Reference Database for Building Envelope Research Prev
Next

Introduction to hotel mold/moisture problems in warm, humid climates

Peart, M.V. and D.P. Gatley
1992
Thermal V, pp. 531-537


Peart, M.V. and D.P. Gatley, (1992), "Introduction to hotel mold/moisture problems in warm, humid climates", Thermal V, pp. 531-537.
Abstract:
Mold, a symptom of excess moisture in hotels, is costly in terms of hotel maintenance, renovation, and loss of revenue when guests reject rooms because of musty smells and discoloration. Recognizing the contribution of moisture from the external environment to hotel mold problems led to the incorporation of psychrometrics and weather data into tables and figures to better demonstrate the relative sensible and latent air-conditioning loads associated with infiltrating or makeup air. The latent load must be dealt with to produce the interior environment least likely to support mold growth. Terms for sensible cooling and latent in-filtration loads were designed, calculated, and plotted against months of the year for three locations in the state of Florida. 7his series of figures provides new insights into the demands for sensible cooling and latent heat removal that can be applied to meet local conditions. Comparisons of other U.S. areas are also included.

AH&MA. 1991. Mold and mold in hotels and motels. American Hotel & Motel Association.

Andrews, J., J. Lamontagne, and M. Piraino. 1989. Inde-pendent control of sensible and latent cooling in small buildings. Sixth Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates, pp. B29-B33.

Bales, E., and H. Trechsel. 1984. Moisture control in buildings workshop. Proceedings of Building 7hermal Envelope Coordinating Council. Washington, D.C.

Bernstein, R.S., W.G. Sorenson, D. Garabrant, and R.D. Treitman. 1983. Exposures to respirable, airborne penicillium from a contaminated ventilation system: Clinical, environmental epidemiological aspects. American Industrial 'Hygiene Association Journal 44:161-169.

Block, S.S. 1953. Humidity requirements for mold growth Applied Microbiology 1:287-293.

Crawford, J.G. 1987. Residential humidity control: Ex citing new opportunities with air flow modulation Fourth Annual Symposium on Improving Building Ener-gy Efficiency in Hot and Humid Climates. pp.57-63.

Cromer, J.C. 1988. Desiccant moisture exchange fo dehunu*dification enhancement of air conditioners. Fiftl Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates. pp.336-340.

Frazier, W.C. 1958. New York: McGraw-Hill.

Fairey, P.W., and D. Kosar. 1988. Effects of materia moisture adsorption and desorption on building coolin loads. Fifth Annual Symposium on Improving Buildin~ Energy Efficiency in Hot and Humid Climates. p.355

Katipamula, S., D.L. O'Near, and S. Somasundaram 1988. Simulation of dehumidification characteristics o high efficiency residential central air-conditioners in ho and humid climates. Fifth Annual Symposium ot Improving Building Energy Efficiency in Hot a

Humid Climates, pp.220-225.

Khattar, M.K., M.V. Swami, and N. Ramanan. 1987a Another aspect of duty cycling: Effects on indoo humidity. Florida Solar Energy Center, FSEC-PF-1 18 87, pp. 1-10.

Khattar, M.K., and D. Keebaugh. 1987b. Direct-expansioi air-conditioning system performance in low humidit) applications: A case study. Fourth Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates, pp.74-83.

Lofgren, H., and F. Mills. 1988. Polyimide capacitive humidity sensor. Fifth Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates, pp.230-234.

Martin, P.C., and J.D. Veerschoor, 1986. Investigation of dynamic latent heat storage effects of building construc-tion and furnishing materials. ORNL/SUB/83X-22016C, Report, Oak Ridge National Laboratory, pp. 22-32.

Peart, M.V. 1989. Southern mold problems: Weather and psychrometrics. Sixth Annual Symposium on Improving Building Systems in Hot and Humid Climates. pp. B2-BlI.

Sherwood, G.E. 1985. Condensation potential in high thermal performance walls-Hot and humid summer climate. Research Paper FPL 455, Forest Products Laboratory, Madison, WI.

TenWolde, A., and H.T. Mei. 1986. Moisture movement in walls in a warm, humid climate. Unpublished report, U.S. Department of Agriculture, Forest Service, Forest Products Laboratory.

West, K.W., and E.C. Hansen. 1988. Effect of hygro-scopic materials on indoor relative humidity and air quality. Unpublished manuscript.


Related Resources:


Related Concepts





CRDBER, at CBS, BCEE, ENCS, Concordia,