Conceptual Reference Database for Building Envelope Research Prev
Next

The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials

Pasanen, A. L., S. Rautiala, et al.
2000
Indoor Air-International Journal of Indoor Air Quality and Climate 10(2): 111-120

Pasanen, A. L., S. Rautiala, et al., (2000), "The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials", Indoor Air-International Journal of Indoor Air Quality and Climate 10(2): 111-120.
Abstract:
We determined the moisture levels, relative humidity (RH) or moisture content (MC) of materials, and concentrations of culturable fungi, actinomycetes and total spores as well as a composition of fungal flora in 122 building material samples collected from 18 moisture problem buildings. The purpose of this work was to clarify if there is any correlation between the moisture parameters and microbial levels or generic composition depending on the type of materials and the time passed after a water damage. The results showed an agreement between the concentrations of total spores and culturable fungi for the wood, wood-based and gypsum board samples (r>0.47). The concentrations of total spores and/or culturable fungi correlated with RH of materials particularly among the wood and insulation materials (r>0.79), but not usually with MC (r<0.45). For the samples collected from ongoing damage, there was a correlation between RH of materials and the concentrations of total spores and culturable fungi (r>0.51), while such a relationship could not be observed for the samples taken from dry damage. A wide range of fungal species were found in the samples from ongoing damage, whereas Penicillin and in some cases yeasts dominated the fungal flora in the dry samples. This study indicates that fungal contamination can be evaluated on the basis of moisture measurements of constructions in ongoing damage, but the measurements are not solely adequate for estimation of possible microbial growth in dry damage.
Related Resources:

Related Concepts

Author Information and Other Publications Notes
Pasanen, A. L.
Anna-Liisa Pasanen Department of Environmental Sciences, University of Kuopio, P.O. Box 1627, FIN-70211 Kuopio, Finland. Phone: 358 17 163 157. Fax: 358 17 163 230. E-mail: annal.pasanen@uku.fi.
  1. A review: fungal exposure assessment in indoor environments
  2. Airborne mesophilici fungal spores in various residential environments
  3. Can microbial volatile metabolites cause irritation at indoor air concentrations?
  4. Critical aspects on the significance of microbial volatile metabolites as indoor air pollutants
  5. Effect of duct-cleaning detergents and disinfection substances on mould growth
  6. Ergosterol content in various fungal species and biocontaminated building materials
  7. Evaluation of indoor fungal exposure
  8. Fungal growth and survival in building materials under fluctuating moisture and temperature conditions
  9. Fungal microcolonies on indoor surfaces an explanation for the base-level fungal spore counts in indoor air
  10. Growth and volatile metabolite production of Aspergillus versicolor in house dust
  11. Occurrence and moisture requirements of microbial growth in building materials
  12. Sensory irritating potency of some microbial volatile organic compounds (MVOCs) and a mixture of five MVOCs
  13. Sensory irritation of microbially produced volatile organic compounds in mice during repeated exposures
  14. Significance of air humidity and air velocity for fungal spore release into the air
  15. Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
  16. Volatile organic metabolites associated with some toxic fungi end their mycotoxins  
Rautiala, S.
  1. Control of exposure to airborne viable microorganisms during remediation of moldy buildings; report of three case studies  


CRDBER, at CBS, BCEE, ENCS, Concordia,