Conceptual Reference Database for Building Envelope Research Prev
Next

The influence of low-permeance vapor barriers on roof and wall performance

Straube, J.
2001
Thermal Performance of Building Envelopes VII, Clearwater Beach Florida, December 2-7

Straube, J., (2001), "The influence of low-permeance vapor barriers on roof and wall performance", Thermal Performance of Building Envelopes VII, Clearwater Beach Florida, December 2-7.
Abstract:
Low-permeance vapor barriers are widely used on the interior of wall and roof systems in large parts of North America. Many codes and standards imply or even state that low-permeance vapor barriers should be used in all cold regions as well as many moderate climate zones. The influence of vapor barriers on the hygrothermal performance of wall and roof systems is a function of exterior climate, interior climate, solar absorptance, rainwater absorption, and the vapor and thermal resistance of all of the layers in the system. In many practical situations, a low-permeance vapor barrier will not improve hygrothermal performance and may in fact increase the likelihood of damaging condensation or trap moisture in the system. This paper will examine the role of vapor barriers on hygrothermal performance with the aid of simple and transparent diffusion calculations supported by measurements from full-scale natural exposure monitoring. The phenomenon of summertime condensation, the drying of roofs and walls, and multiple vapor barrier layers will be explored. The importance of properly assessing both the interior and exterior climate will be discussed. Vapor diffusion control strategies will be presented.
Related Resources:
  • This link has not been checked.BEG--Building Engineering Group
    "the building engineering group at the University of Waterloo, a multi-disciplinary research group that undertakes research, development, and demonstration (R, D & D) for the building industry"

This publication in whole or part may be found online at: This link was checked on Dec. 2006here.
Related Concepts

Author Information and Other Publications Notes
Straube, J.
Department of Civil Engineering, University of Waterloo, Waterloo, Ontario N2L 3T2 Canada
  1. A review of rain control and design strategies
  2. Drainage, ventilation drying and enclosure performance
  3. Driving rain and building facades
  4. Field testing of filled-cavity wall systems
  5. Indoor air quality, healthy buildings, and breathing walls
  6. Methodology and design of field experiments for monitoring the hygrothermal performance of wood frame enclosures
  7. Moisture control in enclosure wall systems
  8. Moisture fundamentals and mould
  9. Moisture in buildings
  10. Moisture movement in building enclosure wall systems
  11. Overview of hygrothermal (HAM) analysis methods
  12. Pressure moderation and rain penetration control
  13. Rain control and screened wall systems
  14. Simplified prediction of driving rain deposition
  15. The role of hygrothermal modeling in practical building design: case studies
  16. Vents, ventilation drying, and pressure moderation  


CRDBER, at CBS, BCEE, ENCS, Concordia,