Conceptual Reference Database for Building Envelope Research Prev
Next

Characterization of fungi occurring on "new" gypsum wallboard

Doll, S.C. and H.A. Burge
2001
Indoor Air Quality 2001 Moisture, Microbes, and Heath Effects: Indoor Air Quality and Moisture in Buildings Conference Papers


Doll, S.C. and H.A. Burge, (2001), "Characterization of fungi occurring on "new" gypsum wallboard", Indoor Air Quality 2001 Moisture, Microbes, and Heath Effects: Indoor Air Quality and Moisture in Buildings Conference Papers.
Abstract:
This study investigated the types of fungi found on gypsum wallboard obtained directly from the manufacturing production line. Samples were cut into 4 ¡Á 4 cm pieces and incubated at 20 ¡ãC under three different moisture conditions; 95%RH (approximately 2.5% saturation moisture content), 0.1 Sat. MC (10% saturation moisture content), and 0.2 Sat. MC (20% saturation moisture content). The moisture levels used in this study were selected to span a wide range of moisture conditions and are not representative of what would be found in well maintained, properly ventilated buildings. In particular, the partially saturated moisture levels would be found under building conditions that would be associated with water leakage from damaged roofs or wall siding, faulty plumbing, or thermal conditions that result in condensation on cold surfaces. A portion of the samples was fumigated with ethylene oxide and subjected to the same test conditions to test the efficacy of this method for sterilizing gypsum-based materials. At five weeks, all six sides of the samples were examined microscopically and acetate tape slides were made of the different fungi observed for further identification. A total of eleven different fungal genera were identified. Penicillium spp. and Aspergillus spp. were the only types found at 95%RH. The number of types of fungi seen increased with increasing moisture content. At 95%RH growth occurred almost exclusively on the paper face surfaces, while at increasing moisture levels greater numbers of fungi were found on the gypsum core surfaces. These findings suggest that, although there is a wide variety of fungi present on "new" gypsum wallboard, there is very little growth of only a few types of fungi under non-wetting conditions even at prolonged conditions of high humidity, and at moisture levels that represent wetting conditions, some of the species present only grow on exposed gypsum core and not the paper faces.

Related Resources:


Related Concepts


Author Information and Other Publications Notes
Doll, S. C.
     
Burge, H. A.
  1. An update on pollen and fungal spore aerobiology
  2. Distribution of various fungi reported on different indoor substrates
  3. Dustborne and airborne fungal propagules represent a different spectrum of fungi with differing relations to home characteristics
  4. Fungal growth in buildings: the aerobiological perspective
  5. Health risk assessment of fungi in home environments
  6. Indoor allergens: assessing and controlling adverse health effects
  7. Moisture, organisms, and health effects
  8. Populations and determinants of airborne fungi in large office buildings
  9. Quantification of ergosterol and 3-hydroxy fatty acids in settled house dust by gas chromatography-mass spectrometry: Comparison with fungal culture and determination of endotoxin by a Limulus amebocyte lysate assay
  10. Review of concentration standards and guidelines for fungi in indoor air  



CRDBER, at CBS, BCEE, ENCS, Concordia,