Test of Four Different Experimental Methods to Determine Sorption Isotherms
Johannesson, B. and Janz, M.
2002 Journal of Materials in Civil Engineering, Volume 14, Issue 6, pp. 471-477
Johannesson, B. and Janz, M., (2002), "Test of Four Different Experimental Methods to Determine Sorption Isotherms", Journal of Materials in Civil Engineering, Volume 14, Issue 6, pp. 471-477.
Abstract:
One important property of materials is their moisture fixation capacity, i.e., their ability to hold moisture at different relative humidities. The sorption isotherm is one of the main input data in moisture diffusion models, and it can also be used to evaluate properties of the microstructure. We have used four different methods to measure the sorption isotherm of sandstone and porous glass. The first method was to equilibrate samples over saturated salt solutions. The second was a sorption balance in which small material samples were weighed as they were exposed to different relative humidities. The third method was the pressure plate extractor, in which a totally wet sample was equilibrated at various overpressures, corresponding to certain relative humidities. The fourth method was a newly developed microcalorimetric technique to measure sorption isotherms. Despite the different natures of the methods, a satisfying agreement was found.
Janz, M. Lund University Dissertation Abstracts, Faculty of Technology, Department of Building and Environmental Technology, Division of Building Materials
M?rten Janz
Swedish Cement and Concrete Research Institute, SE-10044 Stockholm, Sweden.
