Conceptual Reference Database for Building Envelope Research Prev
Next

Transient model for coupled heat, air and moisture transfer through multilayered porous media

Tariku, F., Kumaran, K. and Fazio, P.
2010
International Journal of Heat and Mass Transfer, 53(15-16): 3035-3044
Transient HAM; Moisture; Hygrothermal; Building envelope


Tariku, F., Kumaran, K. and Fazio, P., (2010), "Transient model for coupled heat, air and moisture transfer through multilayered porous media", International Journal of Heat and Mass Transfer, 53(15-16): 3035-3044.
Abstract:
Most building materials are porous, composed of solid matrix and pores. The time varying indoor and outdoor climatic conditions result heat, air and moisture (HAM) transfer across building enclosures. In this paper, a transient model that solves the coupled heat, air and moisture transfer through multilayered porous media is developed and benchmarked using internationally published analytical, numerical and experimental test cases. The good agreements obtained with the respective test cases suggest that the model can be used to assess the hygrothermal performance of building envelope components as well as to simulate the dynamic moisture absorption and release of moisture buffering materials.

This publication in whole or part may be found online at: This link has not been checked.here.
Author Information and Other Publications Notes
Tariku, F.
  1. Defining climate regions as a basis for specifying requirements for precipitation protection for walls
  2. Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
  3. Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
  4. Integrated analysis of whole building heat, air and moisture transfer
  5. Report from Task 4 of MEWS Project - Environmental Conditions, Final Report
  6. Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
  7. Use of hygrothermal numerical modeling to identify optimal retrofit options for high-rise buildings  
Kumaran, K.
  1. A comparison of different techniques to quantify moisture content profiles in porous building materials
  2. Determination of the liquid water diffusivity from transient moisture transfer experiments
  3. Effect of surface temperature on water absorption coefficient of building materials
  4. Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
  5. Final Report from Task 8 of MEWS Project (T8-03) - Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding Clad Wood-Frame Walls
  6. Influence of air space on multi-layered material water vapor permeability measurement
  7. Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
  8. Integrated analysis of whole building heat, air and moisture transfer
  9. Modeling moisture accumulation in multi-layered building materials, MODELING MOISTURE IN RESIDENTIAL BUILDINGS WITH A MULTIZONE IAQ PROGRAM
  10. Moisture management of EIFS walls. Part 1.The basis for evaluation
  11. NIST/NRC-Canada interlaboratory comparison of guarded hot plate measurements: 1993-1997
  12. Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials  
Fazio, P.
Paul Fazio, Professor of Building, Civil & Environmental Engineering, Concordia University, Montreal
  1. A limit state design (LSD) approach for comparing relative drying performance of wood-frame envelope systems with full-scale lab, A roadmap towards intelligent net zero- and positive-energy buildings,
  2. A new test method to determine the relative drying capacity of building envelope panels of various configurations
  3. A new testing method to evaluate the relative drying performance of different building envelope systems using water trays
  4. A quantitative study for the measurement of driving rain exposure in the Montr¨¦al region
  5. A review of research activities in energy efficiency in buildings in Canada
  6. Airtightness testing and air flow modeling of two and three-unit multifamily buildings
  7. Airtightness testing of two- and three-unit buildings with a single fan
  8. Approach for the simulation of wetting due to rain infiltration for building envelope testing
  9. Approach for urban driving rain index by using climatological data recorded at suburban meteorological station
  10. Behavior of wall assemblies with different wood sheathings wetted by simulated rain penetration
  11. Building Physics: 3rd International Conference in Building Physics
  12. Building pressurisation can affect possibility of mould growth
  13. Cavity pressure in rain screen walls
  14. Comparaison de m¨¦thodes de mesure de flux de chaleur pour sp¨¦cimens de grandes et moyennes dimensions
  15. Continuous folded plate structures under uniform load
  16. Creative case adaptation for building engineering design
  17. Design and construction of an environmental chamber facility
  18. Design Methodology of Solar Neighborhoods
  19. Development of experimental procedure to evaluate potential movement of mold spores from wall cavity to indoor environment
  20. Development of HAM tool for building envelope analysis
  21. Effect of capillarity on rainwater penetration in the building envelope
  22. Environmental chamber for investigation of building envelope performance
  23. Essai sur les toits plats isol¨¦s ¨¤ la fibre de cellulose
  24. Evaluation of radiance's genBSDF capability to assess solar bidirectional properties of complex fenestration systems
  25. Experimental evaluation of potential transport of mold spores from moldy studs in full-size wall assemblies
  26. Experimental setup for the study of air leakage patterns
  27. Experimental study of temperature distributions across two curtain wall systems
  28. Folded sandwich plate structures
  29. Identification and transport investigation of microbial volatile organic compounds in full-scale stud cavities
  30. IFC-based framework for evaluating total performance of building envelopes
  31. Impact of added insulation on air leakage patterns
  32. Impact of air leakage pattern on reinsulated walls
  33. In-cavity evaporation allowance--A drying capacity indicator for wood-frame wall system
  34. Influence of air space on multi-layered material water vapor permeability measurement
  35. Influence of facade geometry on weathering
  36. Integrated analysis of whole building heat, air and moisture transfer
  37. Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study
  38. Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test-hut: Part 2- CFD study
  39. Large scale testing of two flat roof assemblies insulated with cellulose
  40. Mapping of air leakage in exterior wall assemblies
  41. Measuring air leakage characteristics with flexible double air chambers
  42. Measuring air leakage of full-scale curtain wall sections using a non-rigid air-chamber method
  43. Methods for the assessment of moisture content of envelope assemblies
  44. Modeling of moisture behavior of wood planks in nonvented flat roofs
  45. Modelling of indoor air humidity: the dynamic behaviour within an enclosure
  46. Moisture buffering capacities of five North American building materials
  47. Moisture performance of leaky exterior walls with added insulation
  48. Nonlinear elastic analysis of panelized shear sandwich walls
  49. Numerical investigation of the influence of room factors on HAM transport in a full-scale experimental room
  50. Performance evaluation protocol for full-scale wood-frame building envelopes
  51. Potential of rain screen walls to prevent rain penetration: pressurized cavity principle
  52. Quantitative driving rain exposure on a vertical wall at various Canadian cities
  53. Rapport Final Projet Site Internet - L'enveloppe du batiment et l'efficacit¨¦ ¨¦nerg¨¦tique
  54. Review and framework for large-scale laboratory studies on wetting and drying of building envelopes
  55. Study of the reduced impact of thermal bridges in two sprayed-applied polyurethane wall assemblies
  56. Study on thermal performance of curtain walls using infrared thermography
  57. Test method to measure the relative capacity of wall panels to evacuate moisture from their stud cavity
  58. Testing of flat roofs insulated with cellulose fiber
  59. The dynamic modelling of air humidity behaviour in a multi-zone space
  60. Transfer of heat, moisture and air through metal curtain walls
  61. Use of an environmental chamber to investigate large-scale envelope specimen hygrothermal performance  



CRDBER, at CBS, BCEE, ENCS, Concordia,