Low light conditions modelling for building integrated photovoltaic (BIPV) systems
Stamenic, L., Smiley, E. and Karim, K.
2004 Solar Energy, 77(1): 37-45
BIPV; Modelling; Low light conditions; Optimisation
Stamenic, L., Smiley, E. and Karim, K., (2004), "Low light conditions modelling for building integrated photovoltaic (BIPV) systems", Solar Energy, 77(1): 37-45.
Abstract:
The low irradiance efficiency of photovoltaic modules is important to the optimization of BIPV systems. When photovoltaic modules are integrated into a building, architectural design considerations compete with maximizing photovoltaic energy production. As a result, BIPV arrays are often not facing south and are frequently mounted vertically. Under these conditions, a greater portion of the total sunlight striking the array is diffuse or at high angles of incidence. In northern latitudes a significant amount of the total yearly energy is produced at low light levels.
A grid-connected array of BIPV modules integrated into the BCIT Technology Centre building in Burnaby, B.C. was used for assessing the accuracy of an energy performance model developed for BIPV systems. The BIPV system uses AC modules and a computerized data acquisition system for monitoring the performance of modules and inverters. The performance model was developed from analysis of the open circuit voltage, maximum power point voltage and maximum power point current of the individual modules comprising the BIPV array.
The algorithm for calculating power output of the photovoltaic array is derived from the ideal diode equation using the single diode model of a photovoltaic cell. An empirically derived parameter modifies the equation. Once the parameters for different module technologies are established, it is possible to compare their annual performance in a BIPV system.
This publication in whole or part may be found online at: here.
