|
- Added references: 26
- Added concepts: 1
- Added essays: 0
References
- Kosny, J., Desjarlais, A. and , J.Christian, (1999), Whole wall rating/label for structural insulated panel: steady-state thermal analysis.
(26-7-10)
- La, D., Dai, Y. J., Li, Y., Wang, R. Z. and Ge, T. S., (2009), Technical development of rotary desiccant dehumidification and air conditioning: A review.
(22-7-10)
- Baetens, R., Jelle, B.P. and Gustavsen, A., (2010), Phase change materials for building applications: A state-of-the-art review.
(22-7-10)
- Bluyssen, P. M., (2010), Towards new methods and ways to create healthy and comfortable buildings.
(2-7-10)
- Steeman, H., T'joen, C., Belleghem, M. V., Janssens, A. and Paepe, M., (2009), Evaluation of the different definitions of the convective mass transfer coefficient for water evaporation into air.
(21-6-10)
- Belleghem, M. V., Steeman, H., Steeman, M., Janssens, A. and Paepe, M., (2010), Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling.
(21-6-10)
- Steeman, M., Belleghem, M. V., Paepe, M. and Janssens, A., (2010), Experimental validation and sensitivity analysis of a coupled BES-HAM model.
(21-6-10)
- Lin, Y. and Zmeureanu, R., (2008), Three-dimensional thermal and airflow (3D-TAF) model of a dome-covered house in Canada.
(21-6-10)
- Balocco, C., (2007), Daily natural heat convection in a historical hall.
(21-6-10)
- Balocco, C. and Grazzini, G., (2009), Numerical simulation of ancient natural ventilation systems of historical buildings. A case study in Palermo.
(21-6-10)
- Dillon, H., (2009), Benchmark comparison of natural convection in a tall cavity.
(21-6-10)
- Bujalski, J. M., Tiller-jeffery, R., Watling, H. R. and Schwarz, M. P., (2003), CFD modeling and comparison with experimental residence time distributions in single and two phase porous flows.
(21-6-10)
- Chung, K. and Hsu, S., (2001), Effect of ventilation pattern on room air and contaminant distribution.
(9-6-10)
- Pepper, D. W. and Wang, X, (2009), Benchmarking COMSOL 3.5a - CFD problem.
(31-5-10)
- Axley, J. W., (2007), Embedded detailed analysis integrating CFD with multizone methods of building airflow analysis.
(31-5-10)
- Stotler, R. L., Frape, S. K., Ruskeeniemi, T., Ahonen, L., Onstott, T. C. and Hobbs, M. Y., (2009), Hydrogeochemistry of groundwaters in and below the base of thick permafrost at Lupin.
(25-5-10)
- WEC, (2007), Survey of Energy Resources 2007.
(20-5-10)
- MIT, (2009), The Future of Geothermal Energy: Impact of Enhanced Geothermal Systems (EGS) on the United States in the 21st Century,.
(20-5-10)
- Baechler, M. C. and Love, P. M., (2005), Building America Best Practices Series: Volume 3 ¨C Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Cold and Very Cold Climates.
(3-5-10)
- Hachem, C., Chaubey, Y., Fazio,, Rao, J. and Bartlett, K., (2010), Statistical analysis of microbial volatile organic compounds in an experimental project: identification and transport analysis.
(30-4-10)
- Becker, R, (2010), Air leakage of curtain walls -- diagnostics and remediation.
(20-4-10)
- Posey, J. and Dalgliesh, W. A., (2005), Thermal Bridges -- Heat flow models with HEAT2 HEAT3, and a general purpose 3-D solver.
(20-4-10)
- ASHRAE, (2008), Advanced Energy Design Guides.
(20-4-10)
- Vereecken, E., Roels, S. and Janssen, H., (2010), In situ determination of the moisture buffer potential of room enclosures.
(20-4-10)
- Steeman, H., Janssens, A. and Paepe, M., (2009), On the applicability of the heat and mass transfer analogy in indoor air flows.
(8-4-10)
- Steeman, M., Paepe, M. and Janssens, A., (2010), Impact of whole-building hygrothermal modelling on the assessment of indoor climate in a library building.
(8-4-10)
Essay
- Databased entry summary on May 21, 2010: 21-5-10
- Journal: Solar Energy Materials and Solar Cells: 3-5-10
- Vapor Management--Building America Best Practices Series: Volume 3: 3-5-10
Web Links
No new entry.
Concept
- LEED: 26-4-10
| |