Mohammad Sadegh Mahdipoor - PhD

Revision as of 17:08, 19 September 2011

Mohammad Sadegh Mahdipoor

Full name	Mohammad Sadegh Mahdipoor
Email	m.mahdipoor [at] gmail.com
Room #	EV13.205

Biography

Mohammad Sadegh Mahdipoor is a PhD student at the Department of Mechanical Engineering of Concordia University. He received his Bachelor degree in Materials Sience & Engineering from University of Semnan in 2007 and Master's degree in Materials Sience & Engineering in 2009 from Amirkabir University of Technology (Tehran Polytechnic). After graduation, he was working as a research assistant at Materials and Energy Research Center (MERC) until July, 2011. He started his PhD program in the department of Mechanical Engineering at Concordia University in September, 2011.

Honors

• A member of “Elites National Organization of Iran”
  
• Registration of three national patents

Publications

Journal Publications

• M.S. Mahdipoor, F.Mahboubi, Sh.Ahangarani, M.Raoufi and H.Elmkhah, "The Influence of Plasma Nitriding Pre-Treatment on Tribological Properties of TiN Coatings Deposited by PACVD", Journal of Materials Engineering and Performance, Article in Press.
• M.Raoufi, Sh.Mirdamadi, F.Mahboubi, Sh.Ahangarani, M.S.Mahdipoor and H.Elmkhah, "Correlation between the surface characteristics and the duty cycle for the PACVD-derived TiN nanostructured films", Surface and Coatings Technology, Vol. 205, Issue. 21-22, 4980-4984 (2011).
• H.Elmkhah, F.Mahboubi, Sh.Ahangarani,  M.S.Mahdipoor and M.Raoufi, "Corrosion behavior of TiN nanostructure coatings deposited by PACVD method", Iran surface coatings magazine, Vol. 32, 11-14 (2010).
• M.S. Mahdipoor, F.Mahboubi, Sh.Ahangarani, M.Raoufi, “Wear properties of TiN coating deposited by PACVD on the hot work steel”, Metallurgy Engineering Magazine of Iran, Vol. 39, 20-27 (2011).
  
  

Conference Publications

• M.S.Mahdipoor, M.R.Rahimipour, M.H.Habibi, “Comparative study of hot corrosion behavior of plasma Sprayed Yttria and Ceria Stabilized Zirconia Thermal barrier Coatings in Na₂SO₄+V₂O₅ at 1050 °C”, TMS 2011, Fatigue and Corrosion Damage in Metallic Materials, February 2011, San Diego, CA, USA.
• M.Raoufi, Sh.Mirdamadi, F.Mahboubi, Sh.Ahangarani, M.S.Mahdipoor and H.Elmkhah, “Tribological study of binary PN-TiN nanostructured films deposited on H11 steel by pulsed DC PACVD”, International Conference on Advanced in materials and Processing Technologies, October 2009, Kuala Lumpur-Malaysia. 
  
  

Professional Work
and Research 
Experience 

• Ceramic coatings Research Assistant, 2009-2011

Ceramic Department, Materials and Energy Research Center (MERC)

-Synthesis of NiCrAlY-CSZ (FGM) thermal barrier coatings by APS and investigating their hot corrosion resistance, physical and mechanical properties.

-Synthesis of NiCrAlY-YSZ (FGM) thermal barrier coatings by APS and investigating their hot corrosion resistance, physical and mechanical properties.

-Synthesis and characterization of FeNi/FeCo thin multilayer films by Electron Beam Physical Vapor Deposition (EBPVD)

• M.Sc. Thesis      “Tribological studies of nitride and TiN duplex layers formed on DIN 1.2344 steel using plasma nitriding and PACVD methods”

- Plasma Assisted Chemical Vapor Deposition (PACVD) & Plasma Nitriding Lab Research Assistant, Under Supervision of Dr. F.Mahboub, 2008-2009 

- Tribology Lab Research Assistant, Under Supervision of Dr. H,Omidvar, 2008-2009

Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, 

• B.Sc. Thesis       “Optimizing Al-SiC composite production process using powder metallurgy method”
  

• Iran Khodro Company (IKCO), pre-treatments of painting line, 2006

"Modification of skids producing parameters" 

Personal Life