Abdullahi Gujba - PDF
(→Published Works) |
(→Awards) |
||
| Line 70: | Line 70: | ||
Frederick Lowy Fellowship, Concordia University (2012) | Frederick Lowy Fellowship, Concordia University (2012) | ||
| − | Masters Full Graduate Scholarship, King Fahd University (2010) | + | Masters Full Graduate Scholarship, King Fahd University of Petroleum and Minerals (2010-2012) |
| − | Best Graduating Student in | + | Best Graduating Student in Mechanical Engineering Department, Bayero University. (2008) |
Best Overall Performance Academic Efforts, Attitude and Hard work, Crescent Int’l School (1998) | Best Overall Performance Academic Efforts, Attitude and Hard work, Crescent Int’l School (1998) | ||
Revision as of 16:09, 27 June 2013
 | |
| Full name | Abdullahi Gujba |
| a_gujba[at]yahoo.com | |
| Room # | EV-14.139 |
Contents |
Education
September 2012-Present
PhD Mechanical Engineering Concordia University, Montreal, Canada. Supervisor-Professor Mamoun Medraj
February 2012-April 2012
MSc Mechanical Engineering (Specialization in Materials and Manufacturing) King Fahd University of Petroleum and Minerals, Kingdom of Saudi Arabia. Supervisor- Dr Nasser Al-Aqeeli
May 2002-February 2008
B.Eng Mechanical Engineering Bayero University, Kano, Nigeria.
Research Interests
Surface Treatment of Ti-6Al-4V Using Laser shock Peening
Powder Metallurgy/Mechanical Alloying Technique
Sintering of Metals e.g. Aluminum, Tungsten Carbide
Corrosion of Materials
Published Works
Journal Publications
[5] N. Al-Aqeeli, K. Abdullahi, A.S. Hakeem, C. Suryanarayana, T. Laoui, S. Nouari, “Synthesis, Characterization and Mechanical Properties of SiC-reinforced Al-based Nanocomposites Processed by MA and SPS”, Powder Metallurgy, Vol. 56, No. 2, 2013, pp 149-157.
[4] N. Al-Aqeeli, K. Abdullahi, C. Suryanarayana, T. Laoui, S. Nouari, “Structure of Mechanically Milled CNT-reinforced Al-alloy Nanocomposites”, Materials & Manufacturing Processes, Accepted, 2012.
[3] K. Abdullahi, N. Al-Aqeeli, “Mechanical Alloying and Spark Plasma Sintering of Nano-SiC Reinforced Al-12Si-0.3Mg Alloy”, AJSE-ENG, Accepted, 2012.
[2] T. Laoui, A. S. Hakeem, K. Abdullahi et al., ‘Spark Plasma Sintering of mixed and milled WC-Co Micro-Nano powders’, Journal of Advanced Materials Research. Vols. 284-286, 2011, pp 537-543.
[1] Z. Ahmad, A. B. Jabbar, K. Abdullahi and M. Abbas ‘Effect of Scandium Doping on the Corrosion Resistance and Mechanical Behavior of Al-3Mg Alloy in Neutral Chloride Solutions’. Journal of Materials Sciences and Applications MSA, Vol.2, 2011, pp 244-250.
Conference Paper
[1] T. Laoui, A. S. Hakeem, K. Abdullahi et al. ‘Effect Of Consolidation Mechanism On the Properties of Nanostructured WC 6,9, 12 wt%Co Hardmetals’. ASME 2011 International Mechanical Engineering Congress and Exposition, 11-17 November, Colorado, USA.
Poster Presentation
[3] K. Abdullahi et al., ‘Fabrication and Testing of Composite Bowl Using Discontinuous Fibers (Discotex)’. Poster Presentation ASM International. Montreal Chapter, Quebec, Canada. February, 20th 2013.
[2] K. Abdullahi, ‘Characterization and Mechanical Properties of Carbon Nanotubes (CNTs) Reinforced Al-matrix by Spark Plasma, Microwave and Hot Isostatic Press Sintering’. Poster Presentation ASM International. Montreal Chapter, Quebec, Canada. February, 20th 2013.
[1] K. Abdullahi, Effect of Post Treatment on the Mechanical Properties of Electrospun Nanofiber Mats using Polyethylene Oxide‟ .The Third Scientific Conference for Students of Higher Education in Kingdom of Saudi Arabia, April 30-May 3, 2012, Kingdom of Saudi Arabia, KSA. (Poster Presentation).
Awards
Frederick Lowy Fellowship, Concordia University (2012)
Masters Full Graduate Scholarship, King Fahd University of Petroleum and Minerals (2010-2012)
Best Graduating Student in Mechanical Engineering Department, Bayero University. (2008)
Best Overall Performance Academic Efforts, Attitude and Hard work, Crescent Int’l School (1998)
