Mohammad Aljarrah
(→Research Fields) |
(→Research Fields) |
||
| Line 9: | Line 9: | ||
Dr. Aljarrah's research interests lie in the general area of | Dr. Aljarrah's research interests lie in the general area of | ||
| − | (a) | + | (a) Thermodynamic of materials |
| − | (b) | + | (b) Alloy development |
(c) Structure-Property relationships. | (c) Structure-Property relationships. | ||
Revision as of 09:25, 23 December 2013
 | |
| Full name | Dr. Mohammad Aljarrah |
| maljarrah@hu.edu.jo | |
| Room # | N/A |
Research Fields
Dr. Aljarrah's research interests lie in the general area of
(a) Thermodynamic of materials (b) Alloy development (c) Structure-Property relationships.
My Ph.D thesis is "Experimental Investigation and Thermodynamic Modeling of the Equilibria in Mg-Al-Ca-Sr System" (In collaboration with CANMET-MTL)
Thesis
Published Works
a. Articles Published in Refereed Journals
[1]M. Aljarrah, E. Essadiqi, Rami H. Fouad, M. Rababah and A. Almagableh (2014) "The effect of annealing conditions and alloying elements on the microstructure stability and mechanical properties of Mg-Zn-Ce sheets", Applied Mechanics and Materials, 472, pp. 937-947.
[2] M. Aljarrah and E.Essadiqi, "On the Precipitates and Mechanical Properties of Magnesium-Yttrium Sheets" Alexandria Engineering Journal, 52(2), pp. 221-225
[3] M. Aljarrah and E.Essadiqi (2013), "The Influence of Micro-alloying and Cooling Rate on Microstructure of Hot Rolled and Annealed AZ31 Sheet" International Review of Mechanical Engineering, 6(6), 2012.
[4] M.N. Khan, M. Aljarrah, J. Wood and M. Medraj, “The effect of cooling rate on thermophysical properties of magnesium alloys”, Journal of Materials Research, Vol. 26, No. 2, 974-982 (2011).
[5] M. Aljarrah, M. Medraj, Jian Li and E. Essadiqi, “Phase Equilibria of the Constituent Ternaries of the Mg-Al-Ca-Sr System”, JOM, Vol. 61, Issue 5, 68-74 (2009) invited Paper.
[6] M. Aljarrah and M. Medraj, “Thermodynamic Assessment of the Phase Equilibria in the Al-Ca-Sr System using the Modified Quasichemical Model”, Journal of Chemical Thermodynamics, Vol. 40, Issue 4, 724-734 (2008).
[7] M. Aljarrah and M. Medraj, “Thermodynamic Modeling of the Mg-Ca, Mg-Sr, Ca-Sr and Mg-Ca-Sr Systems using the Modified Quasichemical Model”, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 32, Issue 2, 240-251 (2008).
[8] M. Aljarrah, M.A. Parvez, E. Essadiqi and Jian Li and M. Medraj, “Microstructural Characterization of Mg-Al-Sr Alloys”, Journal of the Science and Technology of Advanced Materials, Vol. 8, Issue 4, 237-248 (2007).
[9] M. Aljarrah, M. Medraj, X. Wang, E. Essadiqi, G. Dénès and A. Muntasar, “Experimental Investigation of the Mg-Al-Ca System”, Journal of Alloys and Compounds, Vol. 438, Issue 1-2, 131-141 (2007).
[10] M. Aljarrah, U. Aghaulor, and M. Medraj, “Thermodynamic Assessment of the Mg-Zn-Sr System”, Intermetallics, Vol. 15, Issue 2, 93-97 (2007).
[11] M. Aljarrah, M. Medraj, J. Li and E. Essadiqi, “Thermodynamic Modeling and Experimental Investigation of the Magnesium-Aluminum-Calcium-Strontium System”, Proceedings of the Light Metals Technology 2007, 53-57, Saint-Sauveur, Canada, (September 24-26, 2007)
[12] M. Aljarrah, M.A. Parvez, X.Z. Wang, M. Medraj, E. Essadiqi And J. Li, “Mg-Al-(Sr, Ca) Systems - An Experimental Analysis”, Proceedings of the 45th International Conference of Metallurgists, COM 2006, Magnesium Technology in the Global Age, 701-712, Montreal, Canada, (October 1-4, 2006)
b. Articles Published in Refereed Conference Proceedings
[1] Aljarrah, M., Essadiqi, E., Kang, D.H. and Jung, In-Ho “Solidification microstructure and mechanical properties of hot rolled and annealed Mg Sheet produced through twin roll casting route”. Proceeding of the Light Metals Technology 2011, Lüneburg, Germany, July 19-22, 2011.
[2] Jian, V., Su, J.Q., Mishra, R.S., Verma, R., Javid, A., Aljarrah, M. and Essadiqi, E., “Microstructure and Mechanical Properties of Mg-1.7Y-1.2Zn Sheet Processed by Hot Rolling and Friction Stir Processing”, TMS 2011, February 27 - March 3, 2011 • San Diego, California, pp. 565-570, 2011.
[3] Medraj, M., Kevorkov, D., Zhang, Y., Khan, M., Aljarrah, M., “Combinatorial Approach to the Development and Application of Multicomponent Thermodynamic Database for the Mg Alloys Systems” MS&T 2010, October 17-21, 2010: Houston, TX.
[4] Aljarrah, M., Essadiqi, E., R. Verma and R.S. Mishra, "Microstructure Evolution and Mechanical Properties of Mg-Y-Zn Sheets" MS&T 2010, Light Weight Materials for Vehicles and Components, October 17-21, 2010: Houston, TX, pp. 714-727.
[5] Aljarrah, M., Medraj, M., Li, Jian, and Essadiqi, E. (2007) Thermodynamic Modeling and Experimental Investigation of the Magnesium-Aluminum-Calcium-Strontium System. Proceeding of the Light Metals Technology 2007. Saint-Sauveur, QC, Canada, September 24-26, 53-57.
[6] Aljarrah, M., Parvez, M.A., Wang, X., Essadiqi, E., Li, Jian, and Medraj, M. (2006), Mg-Al-(Ca, Sr) Systems- An Experimental Analysis, COM 2006, Magnesium Technology in the Global Age, Montreal, Canada, October 1-4, 701-712.
