Thermodynamics of Materials Research Lab (TMG)

The Thermodynamics of Materials Research Lab is located in the heart of Montreal downtown. It is on the 13th floor of the Engineering building, EV – Sir George Williams Campus.

Contents 1 TMRL Research Facilities 1.1 X-Ray Diffractometer 1.2 Ultima 2 ICP 1.3 SEM/EDX 1.4 DSC/TGA 1.5 Thermal Cycling Rig 1.6 Planetary Ball Mill 1.7 High-Temp Dynamic Wetting/Spreading 1.8 Optical Microscopy 1.9 Metallographic Sample Preparation Facilities 1.10 Furnaces 1.11 Arc Melting Furnace 1.12 Levitation Melting Furnace 1.13 Diffusion Couples and Quartz Tubes Sealing Facilities 1.14 Micro Hardness 1.15 PCTSYS (~PCTPro-2000) 1.16 Thermal Coating 'coming soon' 2 Other avaliable Research Facilities for TMG 2.1 Mechanical Testing 2.2 Atomic Force Microscope 2.3 Mechanical Properties of Nano-Materials 2.4 Thermal Properties

TMRL Research Facilities

X-Ray Diffractometer

Philips X’Pert Pro Multipurpose X-ray Diffractometer

Ultima 2 ICP

This is an Optical Emission Spectrometer (OES) ICP. It is used for elemental analysis of material.

SEM/EDX

JEOL 35-cf equipped with EDAX system for elemental analysis

DSC/TGA

SETARAM differential scanning calorimeter equipped with thermogravitometer

Thermal Cycling Rig

This equipment will allow samples to be subjected to long cycles of heating and cooling that accurately simulate thermal conditions within a turbine or a jet engine.

Planetary Ball Mill

This mill is used for mixing, fine grinding and mechanical alloying.

High-Temp Dynamic Wetting/Spreading

This machine is suitable for in-situ monitoring of the wetting or spreading behavior of liquid metals on solid substrates. Tests can be run at high temperature (up to 1200°C) and in a very controlled atmosphere (10-7 torr vacuum).

Optical Microscopy

Olympus optical microscope

Metallographic Sample Preparation Facilities

Grinding, polishing, mounting, etching.. etc.

Furnaces

We have furnaces suitable for sample preparation and heat treatment.

Arc Melting Furnace

This is a home-made small arc melting furnace suitable for preparing small samples (button samples) for studying phase diagrams or other purposes.

Levitation Melting Furnace

This is a home-made furnace which enables melting of small quantities of materials in a controlled atmosphere.

Diffusion Couples and Quartz Tubes Sealing Facilities

Micro Hardness

Vicker’s micro-hardness tester.

PCTSYS (~PCTPro-2000)

This instrument is for measuring gas sorption properties of materials. It is particularly suited for hydrogen sorption measurements to aid in the development of hydrogen storage and metal hydride battery materials. PCT stands for Pressure Composition Temperature.

Thermal Coating 'coming soon'

Plasma and HVOF systems have been acquired

Other avaliable Research Facilities for TMG

We have access to the following materials research related facilities available at the Mechanical Engineering Department of Concordia University.

Mechanical Testing

Various mechanical testing equipment such as uni-axial and bi-axial tensile testers, hardness, impact toughness.. etc.

Atomic Force Microscope

This Digital Instrument Multimode system allows relatively high temperature measurements up to 250°C.

Mechanical Properties of Nano-Materials

Nanoindenter and Nano-Bionix MTS

Thermal Properties

Laser-Flash method