Abdullahi Gujba - PDF
 | |
| Full name | Abdullahi Gujba |
| a_gujba[at]yahoo.com | |
| Room # | EV-14.139 |
Contents |
Education
September 2012-Present
PhD Mechanical Engineering Concordia University, Montreal, Canada. Supervisor-Professor Mamoun Medraj
February 2012-April 2012
MSc Mechanical Engineering (Specialization in Materials and Manufacturing) King Fahd University of Petroleum and Minerals, Kingdom of Saudi Arabia. Supervisor- Dr Nasser Al-Aqeeli (Dean of Research. Director, Science and Technology Unit, KFUPM)
May 2002-February 2008
B.Eng Mechanical Engineering Bayero University, Kano, Nigeria.
Research Interests
Surface Treatment of Ti-6Al-4V Using Laser shock Peening
Powder Metallurgy/Mechanical Alloying Technique
Sintering of Metals e.g. Aluminum, Tungsten Carbide
Corrosion of Materials
Water Erosion Resistance of Engineering Materials
Research Qualifications
Worked with XRD, SEM, Optical, DSC, Particle Size Analyser, Ball Milling Machines.
Passed Laser Safety Training at Concordia University, April 18, 2013.
Passed Corrosive Materials Training at Concordia University, January 23, 2013.
Passed WHMIS for Laboratory Personnel Training at Concordia University, October 10, 2012.
Passed Hazardous Waste Disposal for Laboratory Personnel Training at Concordia University, October 10, 2012.
Certificate in Health, Safety and Environment (HSE) Competence Development Training levels 2 and 3 Institute of Safety Professionals, Nigeria, 2009.
Topics covered in the HSE training include; Environmental agencies and legislations, ISO 14001, health risk management at work, contingency management, hazards and effect management process (HEMP) and HSE instructions, journey management and defensive driving, fire safety, unsafe act auditing, health risk assessment and SHOC, job hazard analysis and site emergency response.
Published Works
Journal Publications
[5] N. Al-Aqeeli, K. Abdullahi, A.S. Hakeem, C. Suryanarayana, T. Laoui, S. Nouari, “Synthesis, Characterization and Mechanical Properties of SiC-reinforced Al-based Nanocomposites Processed by MA and SPS”, Powder Metallurgy, Vol. 56, No. 2, 2013, pp 149-157.
[4] N. Al-Aqeeli, K. Abdullahi, C. Suryanarayana, T. Laoui, S. Nouari, “Structure of Mechanically Milled CNT-reinforced Al-alloy Nanocomposites”, Materials & Manufacturing Processes, Vol. 28, 2013, pp 984-990.
[3] K. Abdullahi, N. Al-Aqeeli, “Mechanical Alloying and Spark Plasma Sintering of Nano-SiC Reinforced Al-12Si-0.3Mg Alloy”, AJSE-ENG, published online 08 September, 2013.
[2] T. Laoui, A. S. Hakeem, K. Abdullahi et al., ‘Spark Plasma Sintering of mixed and milled WC-Co Micro-Nano powders’, Journal of Advanced Materials Research. Vols. 284-286, 2011, pp 537-543.
[1] Z. Ahmad, A. B. Jabbar, K. Abdullahi and M. Abbas ‘Effect of Scandium Doping on the Corrosion Resistance and Mechanical Behavior of Al-3Mg Alloy in Neutral Chloride Solutions’. Journal of Materials Sciences and Applications MSA, Vol.2, 2011, pp 244-250.
Conference Paper
[1] T. Laoui, A. S. Hakeem, K. Abdullahi et al. ‘Effect Of Consolidation Mechanism On the Properties of Nanostructured WC 6,9, 12 wt%Co Hardmetals’. ASME 2011 International Mechanical Engineering Congress and Exposition, 11-17 November, Colorado, USA.
Poster Presentation
[3] K. Abdullahi et al., ‘Fabrication and Testing of Composite Bowl Using Discontinuous Fibers (Discotex)’. Poster Presentation ASM International. Montreal Chapter, Quebec, Canada. February, 20th 2013.
[2] K. Abdullahi, ‘Characterization and Mechanical Properties of Carbon Nanotubes (CNTs) Reinforced Al-matrix by Spark Plasma, Microwave and Hot Isostatic Press Sintering’. Poster Presentation ASM International. Montreal Chapter, Quebec, Canada. February, 20th 2013.
[1] K. Abdullahi, Effect of Post Treatment on the Mechanical Properties of Electrospun Nanofiber Mats using Polyethylene Oxide‟ .The Third Scientific Conference for Students of Higher Education in Kingdom of Saudi Arabia, April 30-May 3, 2012, Kingdom of Saudi Arabia, KSA. (Poster Presentation).
Awards
Frederick Lowy Fellowship, Concordia University (2012-2015)
Masters Full Graduate Scholarship, King Fahd University of Petroleum and Minerals (2010-2012)
Best Graduating Student in Mechanical Engineering Department, Bayero University (2008)
Best Overall Performance Academic Efforts, Attitude and Hard work, Crescent Int’l School (1998)
