Publications

From TMG
Revision as of 18:13, 19 March 2014 by Mmedraj (Talk | contribs)
Jump to: navigation, search

a) Publications in Refereed Journals

[76] M. Mezbahul-Islam, Y.N. Zhang, C. Shekhar and M. Medraj, “Critical assessment and thermodynamic modeling of Mg-Ca-Zn system supported by key experiments”, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), (Accepted, March 2014).

[75] Dmytro Kevorkov, Mamoun Medraj, Mohammad Aljarrah, Jian Li, Elhachmi Essadiqi, Patrice Chartrand, and Carl Fuerst, "<a href="http://www.hindawi.com/journals/jm/aip/690623/">Experimental study of the Al-Mg-Sr phase diagram at 400ºC</a>", Journal of Metallurgy, (In-Press February 2014)

[74] H. R. Bakhsheshi-Rad*, E. Hamzah, M. Medraj, M. H. Idris, A. F. Lotfabadi, M. Daroonparvar and M. A. M. Yajid, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/Mg-Zn_Reza-Materials_Corrosion.pdf">Effect of heat treatment on the microstructure and corrosion behaviour of Mg–Zn alloys</a>", Materials and Corrosion, (In-Press February 2014)

[73] Ahmad Mostafa, and Mamoun Medraj, <a href="http://link.springer.com/article/10.1007/s11661-014-2251-z">Experimental investigation of the Ce-Mg-Mn isothermal section at 723K (450°C) via diffusion couples technique</a>, Metallurgical and Materials Transactions A, (Online, March 2014).<a href="http://users.encs.concordia.ca/~tmg/images/4/4c/GNC-Ahmad.pdf">PDF version.</a>

[72] Bolarinwa Komolafe and Mamoun Medraj, "<a href="http://www.hindawi.com/journals/jm/aip/387046/">Progress in Wettability Study of Reactive Systems</a>”, Journal of Metallurgy,(accepted, January 2014). <a href="http://downloads.hindawi.com/journals/jm/2014/387046.pdf">PDF version</a>

[71] Md. Mezbahul Islam, Ahmad Mostafa, and Mamoun Medraj, "<a href="http://www.hindawi.com/journals/jma/aip/704283/">Essential Magnesium Alloys Binary Phase Diagrams</a>", Journal of materials, (In press, January 2014) <a href="http://users.encs.concordia.ca/~mmedraj/papers/essential_Mg_Phase_Diagrams.pdf">PDF version</a>

[70] M. Mezbahul-Islam and M. Medraj, "<a href="http://www.nature.com/srep/2013/131023/srep03033/full/srep03033.html">Phase equilibrium in Mg-Cu-Y</a>", Scientific Reports (Published by Nature Publishing Group), Vol. 3, (2013) Article number: 3033 doi:10.1038/srep03033. <a href="http://users.encs.concordia.ca/~tmg/images/0/08/Mg-Cu-Y.pdf">PDF version</a>

[69] Y.N. Zhang, X. Cao, P. Wanjara and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/8/84/Zhang%2C_2013%2C_Acta_Mater._Oxide_films_in_IN718.pdf">Oxide Films in Laser Additive Manufactured Inconel 718</a>”, Acta Materialia, Vol. 61, 6562-6576 (2013). <a href="http://mail.elsevier-alerts.com/go.asp?/bESJ001/mJNUERDF/q1NL5RDF/u4RCL5/xW5RPSDF/cutf%2D8">(Article Statistics)</a>

[68] Md. I. Khan, A. Mostafa, M. Aljarrah, E. Essadiqi and M. Medraj, "<a href="http://www.hindawi.com/journals/jma/aip/657647/">Influence of cooling rate on microsegregation behavior of magnesium alloys</a>", Journal of Materials, Vol. 2014, pp. 1-18. <a href="http://users.encs.concordia.ca/~tmg/images/e/e4/657647_%284%29.pdf">PDF version</a>

[67] X. Cao, A. S. H. Kabir, P. Wanjara, J. Gholipour, A. Birur, J. Cuddy, M. Medraj, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/global_and_local_mech_properties_Ti64_laser.pdf">Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V</a>", Metallurgical and Materials Transactions A, Volume 45, Issue 3, pp 1258-1272.

[66] H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, R. Ebrahimi-Kahrizsangi, M. Medraj, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/Reza_FHA_and_CDHA_on_Mg-Ca_alloy.pdf">In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg-Ca alloys for biomedical applications</a>", Ceramics International, (In-Press, January 2014)

[65] A. Changizi, M. Medraj, and M. Isac, "<a href="http://www.hindawi.com/journals/amse/aip/101872/">Effect of Casting Parameters on the Microstructural and Mechanical Behavior of Magnesium Az31-B Alloy Strips Cast on a Single Belt Casting Simulator</a>", Advances in Materials Science and Engineering, Volume 2014, Article ID 101872, 9 pages. <a href="http://users.encs.concordia.ca/~tmg/images/1/19/101872.pdf">PDF version</a>

[64] H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul-Kadir, A. Ourdjini, M. Medraj, M. Daroonparvara, E. Hamzaha, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Reza_mg-ca-mn-zn.pdf">Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys</a>", Materials and Design, Vol. 53, 283-292 (2014) <a href="http://mail.elsevier-alerts.com/go.asp?/bESJ001/mBBPA7DF/qBTG17DF/uG2U9W4F/xQOSU7DF/cutf%2D8">(Article Statistics)</a>

[63] J Wang, P Hudon, D Kevorkov, P Chartrand, IH Jung, M Medraj, "<a href="http://www.sciencedirect.com/science/article/pii/S0925838813027618">Experimental and thermodynamic study of the Mg–Sn–In–Zn quaternary system</a>", Journal of Alloys and Compounds, Vol. 588, 75–95 (2014). <a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-sn-in-zn.pdf">PDF version</a>

[62] A. Mostafa, A. E. Gheribi, M. Mezbahul-Islam, D. Kevrokov, and M. Medraj, "<a href="http://www.sciencedirect.com/science/article/pii/S036459161300059X">Experimental Investigation and First-Principle Calculations Coupled with Thermodynamic Modeling of the Mn-Nd Phase Diagram</a>", Calphad, Vol. 42, 27-37 (2013). <a href="http://users.encs.concordia.ca/~mmedraj/papers/mn-nd.pdf">PDF version</a>. <a href="http://mail.elsevier-alerts.com/go.asp?/bESJ001/mJ9NGSDF/qSIW7SDF/uFL6E6/xW589TDF/cutf%2D8">(Article Statistics)</a>

[61] J. Yi, M. Gharghouri, P. Bocher and M. Medraj, <a href="http://users.encs.concordia.ca/~tmg/images/a/a9/Distortion_and_residual_stress_measurements.pdf">"Distortion and Residual Stress Measurements of Induction Hardened AISI 4340 Discs"</a>, Journal of Materials Chemistry and Physics, Vol. 142, Issue 1, 248-258 (2013)

[60] M. Mezbahul-Islam and M. Medraj, <a href="http://users.encs.concordia.ca/~tmg/images/0/0e/Cu-Ni-Y.pdf">“Experimental study of the Cu-Ni-Y system at 700°C using diffusion couples and key alloys”</a>, Journal of Alloys and Compounds, Vol. 561, Issue 5, 161-173 (2013)

[59] M. Shamekh, M. Pugh and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Processing_Shamekh.pdf">Processing and Characterization of In-situ (TiC-TiB2)p/AZ91D Magnesium Matrix Composites</a>”, Advanced Engineering Materials, Volume 15, Issue 8, 708–717 (2013)

[58] P. Ghosh and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/pampa_mg-mn-zn_and_mg-mn-ce.pdf">Thermodynamic Calculation of the Mg-Mn-Zn and Mg-Mn-Ce Systems and Re-optimization of their Constitutive Binaries</a>”, CALPHAD, Vol. 41, 89-107 (2013)

[57] Y.N. Zhang, X.D. Liu, Z. Altounian and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/0/0f/Y.N._Zhang%2C_2013%2C_Scripta._Mater.%2C_coherent_nano_precipitates.pdf">Coherent nano-scale ternary precipitates in crystallized Ca4Mg72Zn24 metallic glass</a>”, Scripta Materialia, Vol. 68, 647-650 (2013).

[56] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/fariba-surfandcoat.pdf">Enhancement of amorphous phase formation in alumina–YSZ coatings deposited by suspension plasma spray process</a>", Journal of Surface and Coating Technologies, Vol. 220, 191-198 (2013)

[55] Y.N. Zhang, G.J. Rocher, B. Briccoli, D. Kevorkov, X.B. Liu, Z. Altounian and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/1/1a/Zhang%2C_2013%2C_JAC%2C_Ca4MgZn_metallic_glass.pdf">Crystallization characteristics of the Mg-rich metallic glasses in the Ca-Mg-Zn system</a>”, Journal of Alloys and Compounds, Vol. 552, 88-97 (2013).

[54] L. Jin, D. Kevorkov, M. Medraj, P. Chartrand, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/liling1.pdf">Thermodynamic evaluations and optimizations of Al–Mg–RE (RE: La, Ce, Pr, Nd, Sm) systems coupled with key experiments and Miedema’s model estimations</a>", Journal of Chemical Thermodynamics, Vol. 58, 166-195 (2013)

[53] A.S.H. Kabir, X. Cao, P. Wanjara, J. Cuddy, A. Birur and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser_welding_Ti64.pdf">Use of filler wire for laser welding of Ti–6Al–4V</a>”, Canadian Metallurgical Quarterly, Vol. 51, Issue 3, 320-327 (2012).

[52] G. Arzpeyma, A.E. Gheribi, M. Medraj, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/gilnaz.pdf">On the prediction of Gibbs energy of mixing of binary liquid alloys</a>", Journal of Chemical Thermodynamics. Vol. 57, 82-91 (2013).

[51] D. Kevorkov, Y.N. Zhang, K. Shabnam, P. Chartrand and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/6/6a/Keverkov%2C_2012%2C_Al-Ca-Zn_experimental_work.pdf">Experimental investigation of the phase equilibria of the Al-Ca-Zn system at 623 K</a>”, Journal of Alloys and Compounds, Vol. 539, 97-102 (2012).

[50] M. Shamekh, M. Pugh and M. Medraj, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/reaction_mechanism_Shamekh.pdf">Understanding the reaction mechanism of in-situ synthesized (TiC-TiB2)/AZ91 magnesium matrix composites</a>", Materials Chemistry and Physics, Vol. 135, Issue 1, 193-205 (2012).

[49] F. Tarasi, M. Medraj, A. Dolatabadi, C. Moreau, R.S. Lima and J. Oberste-Berghaus, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/thermal_cycling_of_alumina_zirconia-fariba-JACS.pdf">Thermal Cyclic Heating of Suspension Plasma Sprayed Alumina-YSZ Coatings Containing Amorphous Phases</a>", Journal of the American Ceramic Society, Vol. 95, Issue 8, 2614-2621 (2012).

[48] A.S.H. Kabir, X. Cao, J. Gholipour, P. Wanjara, J. Cuddy, A. Birur, M. Medraj, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/Effect_of_Postweld_Heat_Treatment.pdf">Effect of post-weld heat treatment on microstructure, hardness, and tensile properties of laser welded Ti-6Al-4V</a>”, Metallurgical and Materials Transactions A, Vol. 43, Issue 11, 4171-4184 (2012).

[47] Y.N. Zhang, D. Kevorkov, X.D. Liu, F. Bridier, P. Chartrand and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Ca-Mg-Zn%20experimental3-JALCOM.pdf">Homogeneity range and crystal structure of the Ca2Mg5Zn13 compound</a>”, Journal of Alloys and Compounds, Vol. 523, 75-82 (2012).

[46] S. Raygan, M. Pourabdoli, H. Abdizadeh, M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/nano_MgNiY_alloy.pdf">Synthesizing Nanostructured Ni75Mg16.66Y8.34 (at.%) Powder by Solid State Reaction and Mechanical Milling</a>", Journal of Materials and Manufacturing Processes, Vol. 27, Issue 12, 1300-1305(2012).

[45] P. Ghosh, Md. Mezbahul-Islam and M. Medraj,<a href="http://users.encs.concordia.ca/~tmg/images/1/1b/Mg%E2%80%93Sn%E2%80%93Zn_system.pdf">"Critical assessment and thermodynamic modeling of Mg–Zn, Mg–Sn, Sn–Zn and Mg–Sn–Zn system"</a>, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 36, 28-43 (2012).

[44] F. Tarasi, M. Medraj, A. Dolatabadi, C. Moreau and J. Oberste-Berghaus,"<a href="http://users.encs.concordia.ca/~mmedraj/papers/afm-fariba.pdf">High-Temperature Performance of Alumina-Zirconia Composite Coatings Containing Amorphous Phases</a>", Journal of Advanced Functional Materials, Vol. 21, 4143-4151 (2011).

[43] F. Tarasi, M. Medraj, A. Dolatabadi, C. Moreau and J. Oberste-Berghaus, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/surf%20and%20coating%20tech%202011.pdf">Structural Considerations in Plasma Spraying of the Alumina-Zirconia Composite</a>”, Journal of Surface and Coatings Technology, Vol. 205, 5437–5443 (2011).

[42] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/fariba-jecs.pdf">Amorphous and Crystalline Phase Formation during Suspension Plasma Spraying of the Alumina-Zirconia Composite</a>”, Journal of the European Ceramic Society, Vol. 31, Issue 15, 2903–2913 (2011).

[41] H. Nasery, M. Pugh, and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/AlN-Hesam.pdf">Novel Fabrication Process of AlN Ceramic Matrix Composites at Low Temperatures</a>”, Journal of Science and Engineering of Composite Materials, Vol. 18, 117-125 (2011).

[40] Y.N. Zhang, D. Kevorkov, F. Bridier and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Ca-Mg-Zn%20STAM.pdf">Experimental investigation of the Ca-Mg-Zn system using diffusion couples and key alloys</a>”, Journal of Science and Technology of Advanced Materials, Vol. 12, No. 8, rec.No. 025003 (2011).

[39] M.N. Khan, M. Aljarrah, J. Wood and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/solidification1.pdf">The effect of cooling rate on thermophysical properties of magnesium alloys</a>”, Journal of Materials Research, Vol. 26, No. 2, 974-982 (2011).

[38] Y.N. Zhang, D. Kevorkov, J. Li, E. Essadiqi and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Ca-Mg-Zn%20experimental1.pdf">Determination of the solubility range and crystal structure of the Mg-rich ternary compound in the Ca-Mg-Zn system</a>”, Intermetallics, Vol. 18, No. 12, 2402-2411 (2010).

[37] D. Kevorkov, M. Medraj, Jian Li, E. Essadiqi, and P. Chartrand, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-ca%20400C.pdf">The 400ºC isothermal section of the Mg-Al-Ca system</a>”, Intermetallics, Vol. 18, Issue 8, 1498-1506 (2010).

[36] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/nanocomposite%20coating%20by%20SPS.pdf">Phase Formation and Transformation in Alumina/YSZ Nanocomposite Coating Deposited by Suspension Plasma Spray Process</a>”, Journal of Thermal Spray Technology, Vol. 19, Issue 4, 787-795 (2010).

[35] S. Wasiur-Rahman and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/al-ca-zn.pdf">Thermodynamic Description of the Al-Ca-Zn Ternary System</a>”, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 33, Issue 3, 584-598 (2009).

[34] M. Asgar-Khan and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-mn.pdf">Thermodynamic Description of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems Using the Modified Quasichemical Model for the Liquid Phases</a>”, Materials Transactions, Vol. 50, Issue 5, 1113-1122 (2009).

[33] S. Wasiur-Rahman and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-ca-zn.pdf">Critical Assessment and Thermodynamic Modeling of the Binary Mg-Zn, Ca-Zn and Ternary Mg-Ca-Zn Systems</a>”, Intermetallics, Vol. 17, Issue 10, 847-864 (2009).

[32] M. Aljarrah, M. Medraj, Jian Li and E. Essadiqi, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/jom-2009.pdf">Phase Equilibria of the Constituent Ternaries of the Mg-Al-Ca-Sr System</a>”, JOM, Vol. 61, Issue 5, 68-74 (2009) invited Paper.

[31] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/nanostructured%20coating%201.pdf">Effective Parameters in Axial Injection Suspension Plasma Spray Process of Alumina-Zirconia Ceramics</a>”, Journal of Thermal Spray Technology, Vol. 17, Issue 5-6, 685-691 (2008).

[30] Md. Mezbahul-Islam and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/f/fc/Mg-Ni-Y_system.pdf">A Critical Thermodynamic Assessment of the Mg-Ni, Ni-Y Binary and Mg-Ni-Y Ternary Systems</a>”, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 33, Issue 3, 478-486, (2009).

[29] E. Baril, A. Mostafid, L.P. Lefebvre and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/metal%20foam%20-%20ali.pdf">Experimental Demonstration of Entrance/Exit Effects on the Permeability Measurements of Porous Materials</a>”, Journal of Advanced Engineering Materials, Vol. 10, Issue 9, 889-894 (2008).

[28] H. Al-Kazzaz, X. Cao, M. Jahazi and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser-materials%20transactions.pdf">Reliability of Laser Welding Process for ZE41A-T5 Magnesium Alloy Sand Castings</a>”, Materials Transactions, Vol. 49, Issue 4, 774-781 (2008).

[27] Md. Mezbahul-Islam, D. Kevorkov and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-cu-y.pdf">The Equilibrium Phase Diagram of the Magnesium-Copper-Yttrium System</a>”, The Journal of Chemical Thermodynamics, Vol. 40, Issue 7, 1064-1076 (2008).

[26] H. Al-Kazzaz, M. Medraj, X. Cao and M. Jahazi, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser-materials%20chemistry%20and%20physics.pdf">Nd:YAGLaser Welding of Aerospace Grade ZE41A Magnesium Alloy: Modeling and Experimental Investigations</a>”, Journal of Materials Chemistry and Physics, Vol. 109, Issue 1, 61-76 (2008).

[25] X. Cao, M. Jahazi, H. Al-Kazzaz and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser%20jimr.pdf">Modelling of Work Hardening Behaviour for Laser Welded Magnesium Alloy</a>”, International Journal of Materials Research (formerly Zeitschrift fur Metallkunde), Vol. 99, Issue 2008/2, 216-221 (2008).

[24] M. Aljarrah and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Al-Ca-Sr.pdf">Thermodynamic Assessment of the Phase Equilibria in the Al-Ca-Sr System using the Modified Quasichemical Model</a>”, Journal of Chemical Thermodynamics, Vol. 40, Issue 4, 724-734 (2008).

[23] M. Aljarrah and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-ca-sr.pdf">Thermodynamic Modeling of the Mg-Ca, Mg-Sr, Ca-Sr and Mg-Ca-Sr Systems using the Modified Quasichemical Model</a>”, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 32, Issue 2, 240-251 (2008).

[22] M. Aljarrah, M.A. Parvez, E. Essadiqi and Jian Li and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/exp.%20mg-al-sr%202.pdf">Microstructural Characterization of Mg-Al-Sr Alloys</a>”, Journal of the Science and Technology of Advanced Materials, Vol. 8, Issue 4, 237-248 (2007).

[21] M.A. Arafin, M. Medraj, D.P. Turner and P. Bocher, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/brazing-%20j%20mat%20research.pdf">Mathematical Modeling and Experimental Investigations of Isothermal Solidification during Transient Liquid Phase Bonding of Inconel 625 and 718 Superalloys</a>", Journal of Advanced Materials Research, Vols. 15-17, 882-887 (2007).

[20] M. Medraj, M.A. Parvez, E. Essadiqi and Jian Li, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-sr%20-%20new%20phases.pdf">New Phases in the Mg-Al-Sr System</a>”, Journal of Materials Science Forum, Vols. 539-543, 1620-1625 (2007).

[19] A. Janz, J. Groebner, D. Mirkovic, M. Medraj, Jun Zhu, Y.A. Chang and R. Schmid-Fetzer, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-sr%20with%20rainer.pdf">Experimental study and thermodynamic calculation of Al-Mg-Sr phase equilibria</a>”, Intermetallics, Vol. 15, Issue 4, 506-519 (2007).

[18] M.A. Arafin, M. Medraj, D. P. Turner and P. Bocher, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/brazing-RW%20model.pdf">Transient Liquid Phase Bonding of Nickel Superalloys with BNi-2: Modeling and Experimental Investigations</a>”, Journal of Materials Science and Engineering A, Vol. 447, Issues 1-2, 125-133 (2007).

[17] M. Aljarrah, M. Medraj, X. Wang, E. Essadiqi, G. Dénès and A. Muntasar, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-ca%20exp.pdf">Experimental Investigation of the Mg-Al-Ca System</a>”, Journal of Alloys and Compounds, Vol. 438, Issue 1-2, 131-141 (2007).

[16] M. Medraj, E. Baril, V. Loya and L. P. Lefebvre, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/metalfoam1.pdf">The effect of microstructure on the permeability of metal foams</a>”, Journal of Materials Science, Vol. 42, Issue 12, 4372-4383 (2007)

[15] M. Aljarrah, U. Aghaulor, and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-zn-sr.pdf">Thermodynamic Assessment of the Mg-Zn-Sr System</a>”, Intermetallics, Vol. 15, Issue 2, 93-97 (2007).

[14] M.A. Arafin, M. Medraj, D. P. Turner and P. Bocher, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/brazing-%20j%20mat%20chem%20and%20phys.pdf">Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer</a>”, Journal of Materials Chemistry and Physics, Vol. 106, Issue 1, 109-119 (2007).

[13] S. Al Shakhshir and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-y.pdf">Computational Thermodynamic Model for the Mg-Al-Y System</a>”, Journal of Phase Equilibria and Diffusion, Vol. 27, Issue 3, 231-244 (2006).

[12] M. Medraj, R. Hammond, M.A. Parvez, R. A. L. Drew and W. T. Thompson, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/al2o3-y2o3%20neutron%20diffraction.pdf">High Temperature Neutron Diffraction Study of the Al2O3-Y2O3 System</a>”, Journal of the European Ceramic Society, Vol. 26, Issue 16, 3515-3524 (2006).

[11] F. Islam, A. Thykadavil and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-ge.pdf">A Computational thermodynamic Model of the Mg-Al-Ge System</a>", Journal of Alloys and Compounds, Vol. 425, Issue 1-2, pp. 129-139 (2006).

[10] D. Uremovich, F. Islam and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Ni-Ca.pdf">Thermodynamic Modeling of the Ca-Ni System</a>", Journal of the Science and Technology of Advanced Materials, Vol. 7, Issue 1, 116-126 (2006).

[9] F. Islam and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-ni-ca.pdf">Thermodynamic Assessment of the Mg-Ni-Ca System</a>", CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), 29[4], 289-302 (2005).

[8] M.A. Parvez, M. Medraj, E. Essadiqi, A. Muntasar and G. Dénès, "<a href="http://www.me.concordia.ca/~mmedraj/papers/mg-al-sr.pdf">Experimental Study of the Ternary Magnesium-Aluminum-Strontium System</a>", Journal of Alloys and Compounds, Vol. 402, Issue1-2, 170-185 (2005).

[7] F. Islam and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Mg-Al-Ca.pdf">Thermodynamic Evaluation and Optimization of the Mg-Al-Ca System</a>”, Journal of the Canadian Metallurgical Quarterly, Vol. 44, Issue 4, 523-535 (2005).

[6] T. Balakumar and M. Medraj, “<a href="http://www.me.concordia.ca/~mmedraj/papers/mg-al-sb.pdf">Thermodynamic Modeling of the Mg-Al-Sb System</a>", CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 29, Issue 1, 24–36 (2005).

[5] M. Medraj, W.T. Thompson and R.A.L. Drew, “<a href="http://www.me.concordia.ca/~mmedraj/papers/j%20of%20mat%20proc%20tech.pdf">Understanding AlN Sintering Through Computational Thermodynamics Combined with Experimental Investigation</a>”. Journal of Materials Processing Technology, Vol. 161, Issue 3, 415-422 (2005).

[4] M. Medraj and R.A.L. Drew, “<a href="http://www.me.concordia.ca/~mmedraj/papers/silicates%20industriels.pdf">The Role of the Phase Equilibria in AlN-Al2O3-Y2O3 System on Understanding AlN Sintering</a>”, Journal of Silicates Industriels, Vol. 69, Issue 5-6, 131-139 (2004).

[3] M. Medraj, R. Hammond, W.T. Thompson and R.A.L. Drew, “<a href="http://www.me.concordia.ca/~mmedraj/papers/Acers.pdf">High Temperature Neutron Diffraction of AlN-Al2O3-Y2O3 System</a>”, Journal of the American Ceramics Society, Vol. 86, Issue 4, 717-726 (2003).

[2] M. Medraj, R.A.L. Drew and W.T. Thompson, “<a href="http://www.me.concordia.ca/~mmedraj/papers/thermo-cmq.pdf">Thermodynamic Modeling of the AlN-Al2O3-Y2O3 System</a>”, Journal of the Canadian Metallurgical Quarterly, Vol. 42, Issue 4, 495-506 (2003).

[1] M. Medraj, R. Hammond, J. Root, W.T. Thompson and R.A.L. Drew, “<a href="http://www.me.concordia.ca/~mmedraj/papers/Munich_2001.pdf">The Equilibria in the AlN-Al2O3-Y2O3 Ternary System - Thermodynamics and Neutron Diffraction</a>”, Journal of Applied Physics A - Materials Science and Processing, Vol. 74, Issue [s01], 1188-1191 (2002).

b) Publications in Refereed Conferences

34. Y.I. Murthy, Y.N. Zhang and M. Medraj, "Experimental Determination of the Phase Equilibrium in the Mg-Ca-Y System", Magnesium Technology Symposium, Conference of Metallurgists and Materials Science & Technology Conference, Montreal, Canada, (October 27-31, 2013), (Accepted, 2013)<img src="/~tmg/images/9/90/Newspin.gif" _fck_mw_filename="Newspin.gif" _fck_mw_width="60" alt="Newspin.gif" />

33. Y.N. Zhang, X. Cao, P. Wanjara and M. Medraj, Fiber Laser Deposition of Inconel 718 Using Powders, Advanced Materials, Processes and Applications for Additive Manufacturing Symposium, Conference of Metallurgists and Materials Science & Technology Conference, Montreal, Canada, (October 27-31, 2013), (Accepted, 2013)<img src="/~tmg/images/9/90/Newspin.gif" _fck_mw_filename="Newspin.gif" _fck_mw_width="60" alt="Newspin.gif" />

32. A. Mostafa, D. Kevorkov, A. Gheribi, M. Medraj, <a href=":File:The Mg-Mn-Nd System Mg2012.pdf">The Mg-Mn-Nd System: Experimental Investigation Coupled with Thermodynamic Modeling</a>, Proceeding of the 9th International Conference on Magnesium Alloys and their Applications (Mg2012), Vancouver 2012, 245-250.

31. M. Mezbahul-Islam and M. Medraj,<a href="http://users.encs.concordia.ca/~tmg/index.php?title=File:Mg-Cu-Ni_system.pdf">“Thermodynamic modeling of the Mg-Cu-Ni ternary system using the modified quasichemical model”</a> COM 2011, October 3-6, Montreal, Canada, Light metals, pp. 241-253.

30. M. Shamekh, M. Pugh, and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/AMR.409.215.pdf">"Fabrication and Reaction Mechanism of In-situ TiC and TiB2 Reinforced Mg Matrix Composites"</a>] Advanced Materials Research, Vol. 409, 215-220 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

29. A.S.H. Kabir, X. Cao, J. Gholipour Baradari, P. Wanjara, J. Cuddy and A. Birur and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/AMR-laser_welding_Ti64-2012.pdf">"Determination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V Alloy"</a>] Advanced Materials Research, Vol. 409, 859-864 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

28. S. Konica, Y.N. Zhang, D. Kevorkov and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/9/94/Shabnam_et_al%2C_Advanced_Materials_Research_Vol._409%2C_%282012%29_pp_51-56.pdf">The Ca-rich corner of the Al-Ca-Zn system</a>”, Advanced Materials Research, Vol. 409, 51-56 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

27. Y.N. Zhang, D. Kevorkov, F. Bridier and M. Medraj, “<a href="http://users.encs.concordia.ca/~tmg/images/5/5d/Zhang%2C_Advanced_Materials_Research_Vol._409%2C_%282012%29_pp_387-392.pdf">Morphological and Crystallographic Characterization of Ca-Mg-Zn Intermetallics in Ternary Diffusion Couples</a>”, Advanced Materials Research, Vol. 409, 387-392 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

26. Mohammad Mezbahul-Islam, Elhachmi Essadiqi and Mamoun Medraj,<a href=":File:A Differential Scanning Calorimetric Study of the Mg-Cu-Y System.pdf">"A Differential Scanning Calorimetric Study of the Mg-Cu-Y System"</a> - Materials Science Forum, Vol. 706-709, 1215-1220, (2012). 

25. Mohammad Mezbahul-Islam, Dmytro Kevorkov, Elhachmi Essadiqi and Mamoun Medraj, <a href=":File:Ternary intermetallic compounds across the Mg-NiY line at 673 K.pdf">"Ternary intermetallic compounds across the Mg-NiY line at 673 K"</a> - Materials Science Forum, Vol. 706-709, 1134-1139, (2012). 

24. A.S.H. Kabir, X. Cao, M. Medraj, J. Cuddy and A. Birur, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser%20Ti64%20-%20MST2010.pdf">Effect of Welding Speed and Defocusing Distance on the Quality of Laser Welded Ti-6Al-4V</a>”, Proceedings of the Materials Science and Technology (MS&T) 2010, 2787-2797, Houston, USA, (October 17-21, 2010)

23. F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/ITSC2009%20(Fariba).pdf">Phase Formation in Alumina/YSZ Nano-Composite Coating Deposited by Suspension Plasma Spray Process</a>”, Thermal Spray 2009, 409-414, Las Vegas, NV, (May 4-7, 2009)

22. H. Nasery, M. Medraj and M.D. Pugh, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Com%202008%20Paper.pdf">Processing and Characterization of AlN-MgO-MgAl2O4 Composites by Spontaneous Infiltration</a>”, Proceedings of the 47th Conference of Metallurgists, COM 2008, Aerospace Materials and Manufacturing: Advances in Processing and Repair of Aerospace Materials, 389-399, Winnipeg, Manitoba, Canada, (August 24-27, 2008)

21. S. Wasiur-Rahman and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/ms&t%202008%20Mg-Zn-Ca.pdf">Thermodynamic Model of the Mg-Ca-Zn System</a>”, Proceedings of the Materials Science and Technology (MS&T) 2008, 1042-1053, Pittsburgh, USA, (October 5-9, 2008)

20. M. Asgar-Khan and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/ms&t%202008%20Mg-Al-Mn.pdf">Critical Evaluation and Thermodynamic Modeling of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems</a>”, Proceedings of the Materials Science and Technology (MS&T) 2008, 1029-1041, Pittsburgh, USA, (October 5-9, 2008)

19. M. Mezbahul-Islam and M. Medraj, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/ms&t%202008%20Mg-Ni-Y.pdf">Thermodynamic Evaluation of the Mg-Ni-Y Ternary System</a>”, Proceedings of the Materials Science and Technology (MS&T) 2008, 1017-1028, Pittsburgh, USA, (October 5-9, 2008)

18. F. Tarasi, M. Medraj, A. Dolatabadi, J.O. Berghaus and C. Moreau, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/ITSC2008.pdf">Effective parameters in axial injection suspension plasma spray process of alumina-zirconia ceramics</a>”, Proceedings of the International Thermal Spray Conference & Exposition (ITSC2008), tarasif1/1-tarasif1/6, Maastricht, Netherlands, (June 2-4, 2008)

17. A. Mostafid, M. Medraj, E. Baril and L.P. Lefebvre, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/Mostafid_MetFoam07.pdf">Determination of bulk and entrance contributions to the pressure drop in metallic foams</a>”, Proceedings of the 5th Conference on Porous Metals and Metallic Foams (MetFoam 2007), Montreal, Canada, (September 5-7, 2007)

16. M. Aljarrah, M. Medraj, J. Li and E. Essadiqi, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-ca-sr%20lmt2007.pdf">Thermodynamic Modeling and Experimental Investigation of the Magnesium-Aluminum-Calcium-Strontium System</a>”, Proceedings of the Light Metals Technology 2007, 53-57, Saint-Sauveur, Canada, (September 24-26, 2007)

15. M.A. Arafin, M. Medraj, D.P. Turner and P. Bocher, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/tlp%20COM2006.pdf">Optimization of Process Variables during TLP Bonding of Nickel Superalloys</a>", Proceedings of the 45th International Conference of Metallurgists, COM 2006, Aerospace Materials & Manufacturing: Emerging Materials, Processes, and Repair Techniques, 301-313, Montreal, Canada, (October 1-4, 2006)

14. H. Al-Kazzaz, M. Medraj, X. Cao, M. Xiao And M. Jahazi, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser%20welding%20Mg%20-%20COM2006.pdf">Effect of Laser Power and Joint Gap on Weld Quality of Aerospace Grade ZE41A-T5 Magnesium Alloy Using Nd:Yag Laser</a>”, Proceedings of the 45th International Conference of Metallurgists, COM 2006, Magnesium Technology in the Global Age, 503-518, Montreal, Canada, (October 1-4, 2006)

13. M. Aljarrah, M.A. Parvez, X.Z. Wang, M. Medraj, E. Essadiqi And J. Li, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/mg-al-(sr,ca)%20COM2006.pdf">Mg-Al-(Sr, Ca) Systems - An Experimental Analysis</a>”, Proceedings of the 45th International Conference of Metallurgists, COM 2006, Magnesium Technology in the Global Age, 701-712, Montreal, Canada, (October 1-4, 2006)

12. M. A. Arafin, M. Medraj, D. P. Turner and P. Bocher, “<a href="http://users.encs.concordia.ca/~mmedraj/papers/brazing1.pdf">Thermodynamic modeling and experimental investigation of brazed joints used in aerospace industry</a>”, Proceedings of the 3rd International Brazing and Soldering Conference, 189-196, San Antonio, Texas, USA, (April 24–26, 2006)

11. H. Al Kazzaz, M. Medraj, X. Cao, M. Jahazi and M. Xiao, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/laser%20welding-2005.pdf">Effect of welding speed on Nd:YAG laser weldability of ZE41 A-T5 magnesium sand castings</a>", COM 2005, Light Metals 2005, 137-149, Calgary, Canada, (August 21-25, 2005)

10. V. Loya, M. Medraj, E. Baril, L-P Lefebvre and M. Gauthier, "<a href="http://users.encs.concordia.ca/~mmedraj/papers/metalfoam%20com2005.pdf">The permeability of metal foams and its dependence on microstructure</a>", COM 2005, Light Metals 2005, 421-435, Calgary, Canada, (August 21-25, 2005)

9. M.A. Parvez, X. Wang, E. Essadiqi and M. Medraj, "<a href="http://www.me.concordia.ca/~mmedraj/papers/tms%202005_medraj.pdf">Experimental Investigation of the Equlibria in Mg-Al-(Ca,Sr) Systems</a>", 2005 TMS Annual Meeting - Magnesium Technology 2005, 179-184, San Francisco, California, USA (February 13-17, 2005).

8. F. Islam, M. Medraj, "<a href="http://www.me.concordia.ca/~mmedraj/papers/farhana.pdf">Thermodynamic Modeling of Mg-Ca and Al-Ca Binary Systems</a>", Proc. CSME Forum 2004, 921-929, London, Ontario, Canada (June 1-4, 2004).

7. M.A. Parvez, E. Essadiqi and M. Medraj, "<a href="http://www.me.concordia.ca/~mmedraj/papers/anwar.pdf">Thermal Analytical Investigations of Ternary Mg-Al-Sr System by DSC</a>", Proc. CSME Forum 2004, 829-838 London, Ontario, Canada (June 1-4, 2004).

6. P. Khayargoli, V. Loya, L-P Lefebvre and M. Medraj, "<a href="http://www.me.concordia.ca/~mmedraj/papers/viren.pdf">The Impact of Microstructure on the Permeability of Metal Foams</a>", Proc. CSME Forum 2004, 220-228, London, Ontario, Canada (June 1-4, 2004).

5. X. Wang, M.A. Parvez, E. Essadiqi and M. Medraj, "<a href="http://www.me.concordia.ca/~mmedraj/papers/wang.pdf">A Differential Scanning Calorimeter Study of Mg-Al-Ca Ternary System</a>", Proc. CSME Forum 2004, 819-828, London, Ontario, Canada (June 1-4, 2004).

4. M. Medraj, M. Entezarian and R.A.L. Drew, "Wettability of Al2O3-Y2O3 Compounds on Aluminum Nitride and Their Role in Sintering", Proc. Int. Conf. on the Science, Technology, and Applications of Sintering, 2nd, 307-312 (1999).

3. M. Medraj, M. Entezarian and R.A.L. Drew, “<a href="http://www.me.concordia.ca/~mmedraj/papers/wettability.pdf">Investigation of the Wettability of Al2O3-Y2O3 Stoichiometric Compounds on AlN</a>”, British Ceramic Proceeding, n. 60, 85-87 (1999).

2. M. Medraj and A. Kilani, "Effect of Shot Peening and Hard Chromium Plating on Fatigue Life of Stainless Steel 17-4PH", Proc. 5th Int. Conf. Production Engineering and Design for Development, (1998).

1. M. Medraj and A. Kilani, "<a href="http://www.me.concordia.ca/~mmedraj/papers/shot%20peening.pdf">Investigation of the Effect of Shot Peening Parameters on Peening Intensity</a>", Proc. 5th Int. Symp. Adv. Mater., 744-749 (1997).

c) Miscellaneous

Retrieved from "http://users.encs.concordia.ca/~tmg/index.php?title=Publications"
Personal tools
Namespaces
Variants
Actions
Navigation
Group Navigation
Teaching
Intranet
Toolbox