Conceptual Reference Database for Building Envelope Research Prev
Next

What's New

From Oct-1-2001 to Oct-30-2001

Updates and changes:

(Back to What's New List)
  • Added references: 120
  • Added concepts: 12
  • Added essays: 0

References

  1. Lappalainen, S., K?hk?nen, E., Loikkanen, P., Palom?ki, E., Lindroos, O. and Reijula, K., (2001), Evaluation of priorities for repairing in moisture-damaged school buildings in Finland. (19-10-01)
  2. I?igo, A. C. and S. Vicente-Tavera, (2001), Different degrees of stone decay on the inner and outer walls of a Cloister. (19-10-01)
  3. Pel, L., (1995), Moisture transport in porous building materials. (19-10-01)
  4. Karagiozis, A. and Salonvaara, M., (2001), Hygrothermal system-performance of a whole building. (19-10-01)
  5. Gowri, K., (1991), Knowledge-Based System Approach to Building Envelope Design. (18-10-01)
  6. Al-Kalamchi, A., (1984), Analytical and experimental study of the effects of the oil on the heat transfer coefficient of condensing refrigerant vapour at the external surface of plain horizontal tubes. (18-10-01)
  7. Arlani, A., (1986), Optimum Building Design: Decision Making. (18-10-01)
  8. Zmeureanu, R., (1987), Computer simulation of the effect of building thermal mass on the thermal loads. (18-10-01)
  9. Th¨¦berge, P., (1987), Fast Tracking of Construction Projects: Analysis and Assessment. (18-10-01)
  10. Leonard, C.A, (1988), The effects of change orders on productivity. (18-10-01)
  11. Turaga, M., (1989), Experimental Performance Evaluation of Multi-Row, Plate Finned-Tube, Direct Expansion Air Cooling and Dehumidifying Coils. (18-10-01)
  12. Gowri, K., (1984), Analysis of a Folded Plate Sandwich Panel Roof System Using Assumed Stress Hybrid Elements. (18-10-01)
  13. Mokhtar, A., (1991), A Dynamic Model for Daylighting Impact on Energy Savings in Direct Passive Solar Buildings. (18-10-01)
  14. Rivard, H., (1994), Integration of the Building Envelope Design Process. (18-10-01)
  15. Hegazy, T., (1993), Integrated bid preparation with emphasis on risk assessment using neural networks. (18-10-01)
  16. Gowri, K., Iliescu, S. and Fazio, P., (1994), Creative case adaptation for building engineering design. (18-10-01)
  17. Auger, M., (1990), Experimental Comparison of Three Heating Systems with Respect to Heat Distribution and Thermal Comfort. (18-10-01)
  18. van Mook, F., (1999), Measurements and simulations of driving rain on the main building of the TUE. (18-10-01)
  19. Guit¨¦, P., (1983), Fabrication d'une brique l¨¦g¨¨re et isolante ¨¤ partir d'argile de sciures de bois et de d¨¦chets de verre. (18-10-01)
  20. El-Hakim, N., (1981), Diaphragm-Action of Asbestos Cement Decks. (18-10-01)
  21. Hussein, R., (1980), Structural behaviour of sandwich panels. (18-10-01)
  22. Chockalingham, S., (1979), A Study of Shear Diaphragms and Clad Multistory Frames. (18-10-01)
  23. Rizzo, S., (1979), A study of sandwich-panel building structures. (18-10-01)
  24. Hassan, F., (1978), Mechanical Properties of One-Part Urethane Sealants. (18-10-01)
  25. Moselhi, O., (1978), Analysis of perforated walls and tube-type tall building structures. (18-10-01)
  26. Khalil, M., (1973), The Design, Development and Optimization of Mechanical Connection Systems in Sandwich Panel Construction. (18-10-01)
  27. Salahuddin, A., (1971), Stresses in the Adhesive Layer of Bonded Mid-Panel Joints Connecting Sandwich Panels. (18-10-01)
  28. Fazio, P., (1968), Folded sandwich plate structures. (18-10-01)
  29. Fazio, P., (1964), Continuous folded plate structures under uniform load. (18-10-01)
  30. El-Diasty, R., (1983), An Investigation of Window Systems for Reduced Energy Consumption. (18-10-01)
  31. Athienitis, A. K., (1995), Building simulation in a mathematical programming environment. (17-10-01)
  32. Nakhi, A.E, (1995), Adaptive construction modelling within whole building dynamic simulation. (17-10-01)
  33. Bower, J., (2001), Building a new healthy house. (17-10-01)
  34. Morrison Hershfield Limited, (1996), Testing of Air Barriers Construction Details - I & II. (16-10-01)
  35. Grimsrud, D. T. and Hadlich, D. E., (1999), Residential pollutants and ventilation strategies: volatile organic compounds and radon. (16-10-01)
  36. Makepeace, C. B., (1999), Wrap it up: building houses with the skin on the outside. (16-10-01)
  37. Raw, G., Aizlewood, C., Warren, P., (1999), Indoor Air 99. The 8th International Conference on Indoor Air Quality and Climate. Volume 2. (16-10-01)
  38. Ponessa, J., (1999), Solving a chimney moisture problem. (16-10-01)
  39. DMO Associates, (1999), Drying of walls with ventilated stucco cladding parametric analysis. (16-10-01)
  40. Taylor, B. J. and Imbabi, M. S., (1998), The application of dynamic insulation in buildings. (16-10-01)
  41. Lstiburek, J., (1999), Unventing attics in cold climates. (16-10-01)
  42. Shaw, C. Y., Magee, R. J. and Poirier, G. F., (2000), Measured airtightness of an installed skylight. (16-10-01)
  43. Morrison Hershfield Limited, (1996), Commissioning and Monitoring the Building Envelope for Air Leakage. (16-10-01)
  44. Lawton, M.D., Brown, W.C., Lenardo, B., and Poirier, G.F, (1998), An evaluation guide for performance assessment of air barrier. (16-10-01)
  45. Chouinard, K. L. and Lawton, M. D., (), Rotting wood framed apartments -- not just a Vancouver problem. (16-10-01)
  46. Drysdale, R.G, (1990), Construction problems in multi-family residential buildings. (16-10-01)
  47. IRC, (1996), Review of non-destructive test methods for assessing strength, serviceability and deterioration in buildings. (16-10-01)
  48. Quirouette, R.L., (1996), The rainscreen wall: a commissioning protocol. (16-10-01)
  49. Air-Ins inc, (1997), Water flow by means of capillary action. (16-10-01)
  50. Drysdale, R. G. and Michael J., (1997), Full scale tests of brick veneer steel stud walls - strength and rain penetration. (16-10-01)
  51. Institute for Research in Construction / National Research Council Canada, (1998), Testing of air barrier systems for wood frame walls. (16-10-01)
  52. Pro Pacific Architecture Limited, (1999), Quality by Design: A Quality Assurance Protocol for Wood-Frame Building Envelopes in British Columbia. (16-10-01)
  53. Quirouette, R., (1999), On-site exterior wall monitoring methods for air leakage, condensation and rain penetration control problems. (16-10-01)
  54. Petrone Architects, (2000), Rigid air barrier assemblies. (16-10-01)
  55. Building Envelope Engineering Inc, (2000), Wall moisture problems in Alberta dwellings. (16-10-01)
  56. Mattock, C., (1991), Exterior insulation and finish systems (EIFS): problems, causes and solutions. (16-10-01)
  57. Inculet, D. and D. Surry, (1997), Optimum vent locations for partially-pressurized rainscreens. (16-10-01)
  58. Farnsworth, C. B., (1999), Health house cold climate standards keep occupants warm and dry. (16-10-01)
  59. Horia Hangan and David Surry, (1999), Wind-driven rain study for the Governor's Road Project. (16-10-01)
  60. Tobiasson, W. N., Greatorex, A. R., Fabian, B. A., (1998), Moisture in the roofs of cold storage buildings. (16-10-01)
  61. Kelley, S. J., Chiropolos, J. N. and Gustitus, D. A., (1993), Window systems: repair versus replacement. (16-10-01)
  62. Anon , (2000), Mold growth and IAQ woes at three-year-old school spark lawsuits by school district, students, and staff in Texas towns. (16-10-01)
  63. Wemhoff, P., (2001), Mold, a poltergeist. (16-10-01)
  64. Wardell, C., (2001), Through the roof. (16-10-01)
  65. Anon, (2000), Mould, moisture and mildew in attics: prevention and cure healthier homes, energy savings and new business. (16-10-01)
  66. Anon, (2001), Diagnosing wall moisture. (16-10-01)
  67. Kurnitski, J., (2000), Humidity control in outdoor-air-ventilated crawl spaces in cold climate by means of ventilation, ground covers and dehumidification. (16-10-01)
  68. Lu, X. S. and Viljanen, M., (2000), On controlling indoor thermal and moisture content for an occupied building. (16-10-01)
  69. Cunningham, M. J., (2001), Inferring ventilation and moisture release rates from field psychrometric data only using system identification techniques. (16-10-01)
  70. Woods, T., (2000), Reexamining roof ventilation. (16-10-01)
  71. Chasar, D. A., Shirey, D. B., (1999), Impact of ASHRAE Standard 62-1989 on Florida retail stores. (16-10-01)
  72. Meklin, T., Husman, T. and Vepselainen, A., (2000), Moisture damage in schools - symptoms and indoor air microbes. (16-10-01)
  73. Matilainen, M., Jerkku I. and Kurnitski, J., (1999), Crawl space types and building physics. (16-10-01)
  74. Anon, (2000), Building science 101: air barriers. (16-10-01)
  75. Pasanen, P., Pasanen, A. L., Luoma, M., and Kalliokoski, P., (1993), Effect of duct-cleaning detergents and disinfection substances on mould growth. (16-10-01)
  76. Taylor, B. J. and Imbabi, M. S., (1999), Dynamic insulation in multistorey buildings. (16-10-01)
  77. Bock, R., Schleibinger, H., Ruden, H., (1997), Moisture content of different new and used air filter media under static climatic conditions. (16-10-01)
  78. Kurnitski, J. and Matilainen, M., (2000), Moisture conditions of outdoor air ventilated crawl spaces in apartment buildings in a cold climate. (16-10-01)
  79. Kurnitski, J., (2000), Crawl space air change, heat and moisture behaviour. (16-10-01)
  80. Fennell, H. C., (1998), Case study - ice dam remediation for Northeast ski area condominiums. (16-10-01)
  81. Anon, (2000), How builders and homeowners can identify and limit fungal contamination in new homes. (16-10-01)
  82. Ponterio, L., Rizzo, G., Rodono, G., Scaccianoce, G., (1999), Risk of indoor condensation related to thermal insulation standards. (16-10-01)
  83. Samuelson, I., (1998), Hygrothermal performance of attics. (16-10-01)
  84. Trogisch, A., Franzke, U., (2000), "Humid Air" and cooled walls. (16-10-01)
  85. McGowan, A. G., Wright, J. L., (1998), Computer simulation of window condensation potential. (16-10-01)
  86. Ahman, M., Lundin, A., Musabasic, V., Soderman, E., (2000), Improved health after intervention in a school with moisture problems. (16-10-01)
  87. Nofal, M. and M.K. Kumaran, (2000), On implementing experimental biological damage-functions models in durability assessment systems. (12-10-01)
  88. Pedersen, C. R., (1990), Combined heat and mass transfer in building constructions. (9-10-01)
  89. ASTM, (1998), E1186-98 Standard practices for air leakage site detection in building envelopes and air retarder systems. (5-10-01)
  90. ASTM, (1996), E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door. (5-10-01)
  91. Carroll, M., (2001), Wall sheathing creates headaches for builder, homeowners. (4-10-01)
  92. ASTM, (1998), E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction. (4-10-01)
  93. Padfield, T., (1998), The role of absorbent materials in moderating changes of relative humidity. (4-10-01)
  94. Simonson, C. J., Salonvaara, M. and Ojanen, T., (2000), Improving indoor climate and comfort with wooden structures. (4-10-01)
  95. Sherwood, G. E., (1983), Condensation potential in high thermal performance walls -- cold winter climate. (4-10-01)
  96. ASTM, (2000), C1193-00 Standard Guide for Use of Joint Sealants. (3-10-01)
  97. ASTM, (1999), E917-99 standard practice for measuring life-cycle costs of buildings and building systems. (3-10-01)
  98. ASTM, (1997), C1060-90(1997)e1 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings. (3-10-01)
  99. ASTM, (2001), C168-01 Standard Terminology Relating to Thermal Insulating Materials. (3-10-01)
  100. ASTM, (2000), E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference. (3-10-01)
  101. ASTM, (2000), E1677-95(2000) standard specification for an air retarder (AR) material or system for low-rise framed building walls. (3-10-01)
  102. ASTM, (2001), C1134-90(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion. (3-10-01)
  103. ASTM, (1995), E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference. (3-10-01)
  104. AAMA, (1994), 501.1: Standard test method for metal curtain walls for water penetration using dynamic pressure. (3-10-01)
  105. ASTM, (1995), F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor. (3-10-01)
  106. ASTM, (1998), C209-98 standard test methods for cellulosic fiber insulating board. (3-10-01)
  107. ASTM, (2004), E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings. (3-10-01)
  108. ASTM, (2001), C1498-01 standard test method for hygroscopic sorption isotherms of building materials. (3-10-01)
  109. ASTM, (2001), E631-93a(1998)e1 Standard Terminology of Building Constructions. (2-10-01)
  110. ASTM, (2002), E330-02 standard test method for structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference. (2-10-01)
  111. ASTM, (1999), F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique. (2-10-01)
  112. ASTM, (2000), E1424-91, Standard test method for determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure and temperature differences across the specimen. (2-10-01)
  113. ASTM, (1996), C976-90(1996)e1 standard test method for thermal performance of building assemblies by means of a calibrated hot box. (1-10-01)
  114. Samuelson, I., (2000), Prevention of moisture and mould damages in buildings. (1-10-01)
  115. Woods, J. E., Petrisek, R. E., Granger, R. H. and Wallingford, K. M., (2000), A procedure for evaluating the effectiveness of mold remediation. (1-10-01)
  116. Sato, N., Vittorino, F. and Brazolin, S., (2000), Humidity and development of mold on internal surfaces of building walls. (1-10-01)
  117. Ozaki, A., (2000), Systematic analysis model on combined heat and water transfere of gaseous, liquid and solid phase water system, based on thermodynamic energy. (1-10-01)
  118. Lawton, M. D., Brown, W. C. and Lang, A. M., (1999), Stucco-clad wall drying experiment. (1-10-01)
  119. ASTM, (1998), E1258-88 Standard Test Method for Airflow Calibration of Fan Pressurization Devices. (1-10-01)
  120. ASTM, (2000), E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution. (1-10-01)

Essay

  1. Fungi Spore in the air: 21-10-01
  2. HAM: WUFI-ORNL/IBP: 21-10-01
  3. Reference related OSB: 21-10-01
  4. moisture software?: 21-10-01
  5. Reference: Wood Durability Issues: 21-10-01
  6. IAQ web sites: 21-10-01
  7. IAQ Reference: 21-10-01
  8. Montreal, mould / mold problems: 21-10-01
  9. Health Effects of Mycotoxins: 21-10-01
  10. Wood fungi: 21-10-01
  11. Molds in Indoor Air and health effect: 21-10-01
  12. US new construction 1996 amounted to $600 billion: 21-10-01
  13. VOC Table: 21-10-01
  14. Cleaning Procedures for Mold: 21-10-01
  15. Legal Implications of Mold Contamination of HVAC Systems: 21-10-01
  16. Fungi in Ventilation Systems Bibliography: 21-10-01
  17. ESRU Publications: 21-10-01
  18. Sick Building Syndrome: 21-10-01
  19. Aerobiological Engineering: 21-10-01
  20. Mold and Moisture: 21-10-01
  21. Spores of molds cause health concerns?: 21-10-01
  22. computer code: CLIM2000: 21-10-01
  23. Moisture storage mechanisms: 21-10-01
  24. moisture is the number one cause of building envelope failure and problem: 21-10-01
  25. Vancouver building problems, findings: 21-10-01
  26. Research groups in universities: 21-10-01
  27. Research institutes around the world: 21-10-01
  28. Research institutes in Canada: 21-10-01
  29. IEA Annex: 21-10-01
  30. Oak ridge national laboratory: 21-10-01
  31. House traditions: 21-10-01
  32. computer code: ESP-r: 21-10-01
  33. Filled cavity- pro and con: 21-10-01
  34. computer code: TRNSYS: 21-10-01
  35. computer code: BILGA: 21-10-01
  36. Transport and load in envelopes: 21-10-01
  37. inadequacy of mathematical model - hygrothermal prediction: 21-10-01
  38. HAM: WUFI (W?rme- Und Feuchtetransport Instation?r): 21-10-01
  39. HAM: MOIST 3 1-D heat and moisture transfer model: 21-10-01
  40. HAM: LATENITE: 21-10-01
  41. Finland research project: dyring process 1999-2003: 21-10-01
  42. drying of building walls: 21-10-01
  43. moisture from newly constructed houses: 21-10-01

Web Links

  • No new entry.

    • Concept

    1. measurement: Infrared: 19-10-01
    2. Isotherm: 18-10-01
    3. Fazio's student: thesis: 18-10-01
    4. wood panel: 17-10-01
    5. experiment: field testing and monitoring programs: 16-10-01
    6. water: 5-10-01
    7. measurement: thermal properties: 5-10-01
    8. attic, crawl space, ceiling,: 4-10-01
    9. sheathing: 4-10-01
    10. VOC: 4-10-01
    11. water penetration: 3-10-01
    12. sealant: 3-10-01


    Back to What's New List

    CRDBER, at CBS, BCEE, ENCS, Concordia,