|
Dr.
Ashutosh Bagchi (Publications)
(HQPs are identified bold letters and IF indicates the
ISI Impact Factor - 5yr IF when available)
Refereed Journal Articles:
Published/Accepted
J1. Ikpong, A., A., and Bagchi, A., 2016, “Managing Transportation
Infrastructure against Climate-Triggered Extreme Loading in Cold Regions”, Accepted in ASCE J of Infrastructure Systems (IF:
1.30).
J2. Adhikari,
R.S., Moselhi, O., Bagchi, A.
and Rahmatian, A., 2015, “Tracking of Defects in Reinforced
Concrete Bridges using Digital Images”, Accepted in ASCE J of Computing in Civil Engineering (IF: 1.62).
J3. Esteki,
K., Bagchi, A. and
Sedaghati, R., 2015, “Application of Electro and Magneto-Rheological Fluid
Dampers in TMD”, Smart Structures and Systems (IF: 1.368).
J4. Ghoreishi,
M., Bagchi, A. and
Sultan, M. A., 2015, “Punching Shear Behaviour of Concrete Flat Slabs in
Elevated Temperature and Fire”, J
of Advances in Structural Engineering. 18(5): 659–674 (IF: 0.69).
J5. Chatterjee, A.K., Bhowmick, A.K.
and Bagchi, A., 2015, “Development of a Simplified
Equivalent Braced Frame model for Steel Plate Shear Wall Systems”, Steel and Composite Structures, 18(3): 711-737 (IF: 0.964).
J6. Ikpong, A., A., and Bagchi, A.,
2015, “A New Method for
Rating Highway Bridges against Climate Change Impacts”, ASCE J of Cold Region Engineering, 29(3): Article
number 04014013, 10.1061/(ASCE)CR.1943-5495.0000079
(IF: 0.583).
J7. Rahmatian A., Bagchi, A. and
Nokken, M., 2015, “Serviceability
and Structural Behavior of FRP-RC beams under Different Weathering
Conditions and Fatigue”, J of Applied Mechanics and Materials, 704 (2015): 447-450 (IF 0.15).
J8. Ghodoosi, F., Bagchi, A. and Zayed,
T., 2015, “A System-level Deterioration Model for Reinforced Concrete
Bridge Decks”, ASCE J of Bridge Engineering, 20(5): Article number 04014081, DOI 10.1061/(ASCE)BE.1943-5592.0000670 ,
04014081 (IF: 1.23)
J9. Shoubi, M.V., Shoubi, M.V., Bagchi,
A., Barough, A.S., 2015, “Reducing the operational energy demand in
buildings using building information modeling tools and sustainability
approaches”, Ain Shams Engineering Journal, 6: 41-55, DOI: 10.1016/j.asej.2014.09.006.
J10. Ghodoosi, F., Bagchi, A. and Zayed,
T., 2014a, “Reliability-based
condition assessment of a deteriorated concrete bridge”, Structural Monitoring and Maintenance –
An International Journal, 1(4):
357-369, DOI: http://dx.doi.org/10.12989/smm.2014.1.4.357
J11. Ghodoosi,
F., Bagchi, A. and Zayed, T., 2014b,
“Reliability-based condition assessment of an externally-restrained
bridge deck system considering uncertainties in key design parameters”,
ASCE J of Performance of Constructed Facilities. 20(5): Article number 04014081, DOI: 10.1061/(ASCE)CF.1943-5509.0000699
(IF: 0.87).
J12. Sooch, G.S. and Bagchi, A., 2014, “A New Iterative Procedure for
Deconvolution of Seismic Ground Motion in Dam-Reservoir-Foundation Systems”, J of Applied Mathematics, Article ID 287605, 10 pages, DOI: http://dx.doi.org/10.1155/2014/287605
(IF: 0.72).
J13. Islam,
M.S., and Bagchi, A., 2014, “Statistical
Pattern-Based Assessment of Structural Health Monitoring Data”, J of Mathematical Problems in Engineering, Article ID 926079, 8 pages,
DOI: http://dx.doi.org/10.1155/2014/926079 (IF: 0.80).
J14. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2014, “Automated Condition Assessment of Concrete Bridges with
Digital Imaging”, Smart Structures
and Systems – An International journal, 13(6): 901-925. DOI: http://dx.doi.org/10.12989/sss.2014.13.6.901
(IF: 1.368).
J15. Esteki,
K., Bagchi, A. and
Sedaghati, R., 2014, “Dynamic Analysis of Electro and Magneto-Rheological
Fluid Dampers using the Duct Flow models”, Smart Materials and
Structures, 23 (3):
035016 (11 pp), Article number 035016, DOI:
10.1088/0964-1726/23/3/035016 (IF: 2.74).
J16. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2014, “Image Based Retrieval of Concrete Crack Properties for
Bridge Inspection”, J of Automation
in Construction, 39: 180-194 (IF: 2.45).
J17. Ghoreishi,
M., Bagchi, A. and
Sultan, M. A., 2013, “Review of the Punching Shear Behaviour of
Concrete Flat Slabs in Ambient and Elevated Temperature”, J of Structural Fire Engineering, 4(4): 259-279.
J18. Islam,
M.S., Bagchi, A. and Said, A.,
2013, “Developing a
Pattern-Based Method for Detecting Defective Sensors in an Instrumented
Bridge”, J of
Civil Structural Health Monitoring. 3: 195-206, DOI: 10.1007/s13349-013-0040-9.
J19. Noman,
A.S., Deeba, F. and
Bagchi, A., 2012, “Health Monitoring of Structures Using Statistical
Pattern Recognition Techniques”, In Press, ASCE J of Performance of
Constructed Facilities. 27(5),
575–584, DOI: 10.1061/(ASCE)CF.1943-5509.0000346. Published online
(IF: 0.87).
J20.
Bagchi, A., 2012, “Linear and nonlinear buckling of
thin shells of revolution”, Trends in
Applied Science Research, 7(3):
196-209, DOI:
10.3923/tasr.2012.196.209.
J21. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2012, “Image-based Automated Condition Rating for Bridges”, Gerontechnology, 11(2): 81, doi:
http://dx.doi.org/10.4017/gt.2012.11.02.153.00.
J22. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2012, “Image-based Retrieval of Concrete Crack Properties”, Gerontechnology, 11(2): 315, doi:
http://dx.doi.org/10.4017/gt.2012.11.02.458.00.
J23. El Kafrawy, O., Bagchi, A. and
Humar, J., 2011, “Seismic
Performance of Concrete Moment Resisting Frame Buildings in Canada”,
J of Structural Engineering and
Mechanics, 37(2): 233-251
(IF: 0.927).
J24. Bagchi,
A., Humar, J., Xu, H, and Noman, A.
2010, “Model-Based Damage Identification in a Continuous Bridge using
Vibration Data”, ASCE J of Performance of Constructed Facilities, 24(2): 148-158 (IF:
0.87).
J25. Bagchi,
A., Murison, E., Mufti, A.A. and Noman, A. S., 2010, “Evaluation of a
Rugged Fiber Optic Sensor System for Monitoring Reinforced Concrete
Structures”, Experimental Techniques,
the J of the Society of Experimental Mechanics, March/April, 34(2): 49-53 (IF: 0.62).
J26. Yousuf,
M. and Bagchi, A., 2010,
“Seismic Performance of a Twenty Storey Steel Frame Building in Canada”, J
of Structural Design of Tall and Special Building, 19: 901-921 (IF: 1.22).
J27. Bogdan,
B.A., Bagchi, A. and Mufti, A.A., 2009, “SHM data interpretation and
structural condition assessment of the Manitoba Golden Boy”, Smart Structures and Systems, 6(1): 87-90 (IF: 1.368).
J28. Yousuf,
M. and Bagchi, A., 2009,
“Seismic Design and Performance Evaluation of Steel-Frame Buildings
Designed using NBCC-2005”, Canadian J of Civil Engineering, 36:
280-294 (IF: 0.59).
J29.
Mousavi, S.,
Bagchi, A. and Kodur, V.K.R., 2008, “Review of Post-Earthquake Fire Hazard
to Buildings”, Canadian Journal of Civil Eng, 35: 689-698 (IF: 0.59).
J30. Bagchi, A., Humar, J. and Noman, A. 2007,
“Development of a Finite Element System for Vibration Based Damage
Identification in Structures”, Journal of Applied Sciences, 7(17):
2404-2413.
J31. El
Kafrawy O. and Bagchi, A. 2007, “Computer Aided Design and Analysis of
Reinforced Concrete Frame Buildings for Seismic Forces”, Information
Technology Journal, 6(6): 798-808.
J32. Humar,
J. Bagchi, A. and Xu, H. 2006, “Performance analysis of vibration based techniques
for structural damage identification”, Structural Health Monitoring
–International Journal, 5(3):215-227 (IF: 3.08). (Among top ten downloaded papers from the
journal website in 2008-11, and one of the most cited articles from the
journal in 2015).
J33. Huffman,
S. Bagchi, A. Mufti, A. Neal, K. Sargent,
D. Rivera, E. 2006, “GFRP
seismic strengthening and structural health monitoring of Portage Creek
Bridge concrete columns”, Arabian Journal of Science and Technology,
31(1C): 25-42 (IF: 0.38).
J34. Bagchi, A. 2005, “Updating the
mathematical model of a structure using the measured vibration
characteristics”, Journal of Vibration and Control, 11(12):
1469-1486 (IF: 1.34).
J35. Bagchi,
A. 2005, “A study on the management of performance requirements for a
distributed service delivery software system”, Journal of Information
and Software Technology, 47(11): 735-746 (IF: 1.61).
J36. Bagchi,
A. 2004, “A simplified method of evaluating the seismic performance of
buildings”, Journal of Earthquake
Engineering and Engineering Vibration, 3(2): 223-236 (IF: 0.95).
J37. Humar,
J. L., Bagchi, A. and H. Xia, 1998, “Frequency Domain Analysis of
Soil-Structure Interaction”, Computers
and Structures, 66(2-3):
337-351 (IF: 2.53).
J38. Bagchi,
A. and Paramasivam, V. 1996, “Stability Analysis of Axi-symmetric Thin
Shells”, ASCE Journal of Engineering
Mechanics, 122(3): 278-281
(IF: 1.53).
J39. Bagchi,
A. and Paramasivam, V. 1995, “Static and Stability analysis of the Inner
Vessel of a Fast Breeder Reactor”, Journal
of Nuclear Engineering and Design, 158:
81-94 (IF: 1.13).
J40. Paramasivam,
V., Bagchi, A. and Gowda, S. P. T. R. 1995, “Elastic Stress Analysis of
Axi-symmetric Shells subjected to Thermal and Mechanical Loads by the
Finite Element Method”, Journal of
Institution of Engineers (India), Civil Engineering division, 76: 29-37. (Awarded
Certificate of Merit by Institution of Engineers (India))
Conference Articles:
C1. Banerji, S. and Bagchi, A., 2016,
“Energy Harvesting Methods for Structural Health Monitoring Using Wireless
Sensors: A Review”, Accepted in CSCE Annual Conference, June, London,
Ontario.
C2. Sabamehr, A. Lim, C. A.,
Bagchi, A. 2016, “Data-driven Methods for System Identification of Bridges
Using Vibration Data”, Accepted in CSCE Annual Conference, June,
London, Ontario.
C3. Kazaeli, S., Ghotbi, A., Banerji, S.
and Bagchi, A., 2016, “Application of the C4.5 algorithm in structural
health monitoring: Sensor placement and construction of predictive models”,
Accepted in CSCE Annual Conference, June, London, Ontario.
C4. Kazaeli, S., Ghotbi, A., Banerji, S.
and Bagchi, A., 2016, “The Application of Data Mining and Cloud Computing
Techniques in Data-driven Models for Structural Health Monitoring”,
Accepted in Smart Structures/NDE Conference, March 20-24, SPIE, Las Vegas.
C5.
Rahmatian
A., Bagchi, A. and Nokken, M., 2016, “Fatigue and Structural
Behaviour of Embedded-FOS in FRP-RC Beams under Different Weathering
Conditions”, Transportation
Research Board (TRB) Conference, Washington, DC, 28 January.
C6.
Banerji,
A.K., Topdar, P., Datta, A.K. and Bagchi, A., 2015, “Review of Numerical Modelling Techniques
for Studying the Dynamic Response and Damage States of Highway Pavement”, Int. Conf. on Innovations in
Structural Engineering (IC-ISE-2015), Dec 14-16, Hyderabad, India.
C7.
Ghodoosi
F., Bagchi, A. and Zayed, T., 2015, “Comparison of Performance of Conventional and Steel-Free Concrete
Bridge Deck Systems”, 3rd
Int Conference on Advances in Civil, Structural and Environmental
Engineering, Oct 10-11, Zurich, Switzerland.
C8.
Rahmatian
A., Bagchi, A. and Nokken, M., 2015, “Fatigue Performance of
Embedded-FOS in FRP-RC Beams under Different Weathering Conditions”,
ConMat’15, The 5th International Conference on Construction
Materials: Performance,
Innovations and Structural Implications. Whistler, B.C. August 18-21. Paper
# 367.
C9. Sabamehr, A. Lim, C. A.,
Bagchi, A. 2015, “Updating the Mathematical Models of Bridges Using
Data-driven Techniques”, The 10th International Workshop on
Structural Health Monitoring (IWSHM): Signal Processing. Stanford,
LA September 1–3, Paper #1022
C10. Rahmatian A., Bagchi,
A. and Nokken, M., 2015,”Performance Evaluation of FBG Sensors under
Fatigue and Weathering”, The 10th International Workshop
on Structural Health Monitoring (IWSHM): Sensors/Actuators. Stanford,
LA September 1–3, Paper #1043
C11. Sabamehr, A., and
Bagchi, A. 2015, “Investigation of Different Types of Seismic Base Isolators
for a Continuous Box Girder
Bridge”, ASCE Forensic Engineering 7th Congress –
Performance of Built Environment, Nov 15-18, Miami, Florida.
C12.
Ram,
S. and Bagchi, A., 2015, “Seismic Performance Evaluation of Steel
Moment Resisting Frames”, 11th Canadian Conference on Earthquake
Engineering, Victoria, BC, Paper# 94337.
C13.
Esteki,
K., Bagchi, A. and Sedaghati, R., 2015, “Application of Semi-Active
Tuned Mass Damper in Controlling the Seismic Response of a Building”, 11th
Canadian Conference on Earthquake Engineering, Victoria, BC, Paper# 93829.
C14.
Ghoreishi, M., Bagchi, A. and Sultan, M.A., 2015, “Experimental Investigation of Concrete
Flat Slabs in Elevated Temperature”, Protect 2015 Conference, Michigan State University, East Lansing,
MI.
C15.
Latosh
F. and Bagchi, A., 2014, “Evaluation of the STM Model for
FRP-Reinforced Concrete Deep Beams by an Experimental Study”, ID # GEN9, 2014 Annual Conference of CSCE, #
GEN106, Halifax, Nova Scotia.
C16.
Adhikari, R.S., Moselhi, O. and Bagchi, A., 2013, “Spectral and Fractal
Analysis of Digital Images for Evaluating Defects in Bridges”, IEMCON 2013:
4th IEEE International Conf on Innovation in Computing and
Communications, Kolkata, India.
C17.
Adhikari, R.S., Moselhi, O. and Bagchi, A., 2013, “Image-Based Change
Detection for Bridge Inspection”, ISARC 2013: International Symposium of
Automation and Robotics in Construction, Montreal, Quebec.
C18. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2013, “A Study of Image-Based Element Condition Index for Bridge
Inspection”, ISARC 2013, Montreal, Quebec.
C19. Adhikari,
R.S., Zhu, Z., Moselhi, O. and
Bagchi, A., 2013, “Automated Bridge Condition Assessment with Hybrid
Sensing”, ISARC 2013, Montreal, Quebec.
C20.
Latosh
F. and Bagchi, A., 2013, “Behaviour of Reinforced Concrete Deep Beams
and Comparison of Existing Design Procedures”, CSCE Annual Conference, Montreal, Quebec.
C21.
Ghodoosi
F., Bagchi, A. and Zayed, T., 2013, “Estimating the Reliability-Based Bridge Condition Index of
Conventional Bridge Decks using Existing Deterioration Patterns”, CSCE Annual Conference, Montreal,
Quebec.
C22.
Ikpong,
A. and Bagchi, A., 2013, “Structural Analysis and Load Rating Issues in Bridge Management”,
CSCE Annual Conference, Montreal,
Quebec.
C23.
Rahmatian
A., Bagchi, A. and Nokken, M., 2013, “Performance of an innovative SHM
system for RC flexural members under normal and adverse environmental
conditions”, CSCE Annual
Conference, Montreal, Quebec.
C24.
Ghodoosi
F., Bagchi, A. and Zayed, T., 2013, “A Deterioration Model For Concrete
Bridge Deck Using System Reliability Analysis”, Transportation Research Board (TRB) Conference, Washington, DC,
January.
C25.
Rahmatian
A., Bagchi, A. and Nokken, M., 2013, “Finite Element Modelling of
FRP-Reinforced Concrete Flexural Elements Installed with Protected Fiber
Optic Sensors”, Transportation
Research Board (TRB) Conference, Washington, DC, January.
C26. Sooch, G.S. and Bagchi, A., 2012,
“Effect of Seismic wave scattering on the Response of Dam-Reservoir-Foundation
Systems”, 15th World Conference on Earthquake Engineering
(15WCEE), Lisbon, Portugal.
C27.
Ikpong,
A. and Bagchi, A., 2012, “A New Method for Ranking Competing Projects
and Programs in Bridge Management Systems”, CSCE Conference 2012, Edmonton, Alberta.
C28.
Ikpong,
A. and Bagchi, A., 2013, “Exploring the Concept of Bridge Functional
Index in the Context of Climate Change Impacts on Transportation
Infrastructure”, CSCE Conference
2012, Edmonton, Alberta.
C29. Chatterjee, A.K., Bhowmick, A.K.
and Bagchi, A., 2012, “Finite element modeling and analysis of light-gauge
steel plate shear walls”, 3rd International Structural Specialty
Conference, Annual Conference of
the Canadian Society of Civil Engineering (CSCE 2012), Edmonton, Alberta.
C30. Chatterjee, A.K., Bhowmick, A.K.
and Bagchi, A., 2012, “An equivalent strut and tie model for steel plate
shear walls”, 15WCEE, Lisbon, Portugal.
C31. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2012, “Image-based Retrieval of Concrete Crack Properties”,
ISARC 2012: International Symposium of Automation and Robotics in
Construction, Eindhoven, Netherlands.
C32. Adhikari,
R.S., Moselhi, O. and Bagchi,
A., 2012, “Image-based Automated Condition Rating for Bridges”,
ISARC 2012: International Symposium of Automation and Robotics in
Construction, Eindhoven, Netherlands.
C33.
Rahmatian
A., Bagchi, A. and Nokken, M., 2012, “Non-Linear Finite Element
Analysis of Rectangular Concrete Beams using Fiber-Reinforced Polymers in
Structural Health Monitoring”, ACMBS
Conference, Kingston, Ontario.
C34.
Ghodoosipoor,
F., Bagchi, A. and Zayed, T., 2012, “Reliability-based assessment of
steel-free deck system bridges”, Transportation
Research Board (TRB) Conference, Washington, DC, January.
C35.
Esteki,
K., Bagchi, A. and Sedaghati, R., 2011, “Analysis of MR damper under seismic or
random loading”, CSCE
Conference 2011, Ottawa, ON.
C36.
Ghodoosipoor,
F., Bagchi, A. and Zayed, T., 2011, “Reliability assessment of
steel-free deck system bridges”, CSCE
Conference 2011, Ottawa, ON.
C37.
Esteki,
K., Bagchi, A. and Sedaghati, R., 2011, “CFD analysis of Electro- and
Magneto-Rheological Fluid damper”, CSCE Conference 2011, Ottawa, ON.
C38. Yassin,
M. H., Bagchi, A. and Kodur, V. 2010, “Structural performance of light-frame wood buildings subjected
to post-earthquake fire exposure”, 9th Canadian & 10th
US National Conference on Earthquake Engineering, Special Session on
Earthquake & Fire, Toronto, ON.
C39.
Yassin, M. H., Bagchi, A. and Kodur, V.
2010, “Performance of steel moment
resisting frame buildings subjected to post-earthquake fire exposure”,
9th
Canadian & 10th US National Conference on Earthquake
Engineering, Special Session on Earthquake & Fire, Toronto, ON.
C40. Noman, A.S., Deeba, F. and Bagchi,
A., 2009, “Vibration-based methods and
statistical pattern recognition techniques in structural health monitoring”,
Int Workshop on Smart Materials
and Structures (CANSMART), Oct 22-24, Montreal, Canada.
C41.
Deeba, F., Rahmatian, A. and
Bagchi, A., 2009, “Structural Health Monitoring of Railway
Bridges”,
CSCE Annual Conference, Paper# GC-158, June, St. John’s, Newfoundland.
C42.
Iqbal, F., Bagchi, A. and
Sedaghati, R., 2009, “Dynamic
Response Control of Buildings using Magneto-Rheological Damper”, CSCE Annual Conf, GC-159, June, St. John’s, Nfld.
C43.
Zakikhani,
S., Hammad, A. and Bagchi, A.,
2009, “Towards a wireless sensor network design guideline for SHM
applications”, CSCE Annual
Conference, Canadian Society of Civil Engineering, June, St. John’s,
Newfoundland.
C44.
Rahman, M. and Bagchi,
A., 2009, “Application of
Neural Networks and Wavelet Transform in SHM”, CSCE 2009 Annual Conference, GC-160, June, St.
John`s, Newfoundland.
C45.
Mousavi,
S., Bagchi, A. and Pekau, O.A.,
2009, “Seismic Performance of Concrete Shear Wall Buildings Designed
using NBCC 2005”, CSCE Annual Conference, Canadian Society of Civil Engineering, GC-166,
June,
St. John’s, Newfoundland. (NSERC)
C46. Yassin,
M. H., Bagchi, A. and Kodur, V. 2009, “Performance of Stud Walls under
Accidental and Post-earthquake Fire Exposure”, CSCE Annual Conf, IMM-020, June, St.
John’s, Nfld.
C47. Yousuf, M., Datta, A.K. and Bagchi, A., 2009, “Optimal Placement of
Sensors for Structural Health Monitoring of Buildings under Seismic
Actions”, 4th International Conf on Structural Health Monitoring
(ISHMII-4), Paper# 492, July 22-24, Zurich,
Switzerland.
C48. Datta, A.K., Bagchi, A. and Islam M.S., 2009, “Seismic damage identification of
buildings in hilly areas for the purpose of health monitoring”, 4th International Conf on
Structural Health Monitoring (ISHMII-4),
Paper# 484, July 22-24, Zurich,
Switzerland.
C49. Ghoreishi,
M., Bagchi, A. and
Sultan, M. A., 2009, “Estimating the Structural Response to Fire
Exposure: State of the Art Review, Fire and Materials Conference, San
Francisco, January 26-28.
C50. Dubey, B., Bagchi, A. and Alkass, S.
2008, “Evaluation of Expected Life-Cycle Cost of Structures using
Structural Health Monitoring”, Annual Conference of the Canadian Society of
Civil Engineering, June 10-13.
C51. Hassan, Y., Bagchi, A. and Kodur,
V. 2008, “Structural Performance of Stud Walls under Normal and
Post-Earthquake Fire Exposure”, ASCE/SEI Structures Congress 2008,
Vancouver, Canada, April 24-26.
C52. Dubey, B., Bagchi,
A. and Alkass, S. 2007, “Incorporating the Structural Health Monitoring
Data to Reliability-Based Structural Condition Assessment”, 3rd
International Conference on Structural Health Monitoring of Intelligent
Infrastructure (SHMII-3), Vancouver, November.
C53. Bagchi,
A., Rivera, E. and Mufti, A.A. 2007, “Evaluation of a Rugged Fiber Optic
Sensor System for Monitoring Reinforced Concrete Structures”, SHMII-3
Conference, Vancouver, November.
C54. Bagchi,
A. 2007, “Developing a Graduate Course on Structural Health Monitoring of
Civil Infrastructure”, SHMII-3
Conference, Vancouver, November.
C55. Dubey, B., Bagchi, A. and Alkass, S. 2007,
“Selection of Optimal Alternative for Bridge Monitoring: Weighted Objective
Decision Analysis”, 6th International Workshop on Structural Health
Monitoring, Stanford, CA, September.
C56. Bagchi,
A., Huffman, S. and Mufti, A.A. 2007, “Seismic Strengthening and Structural
Health Monitoring of Portage Creek Bridge”, 9th Canadian Conf. on
Earthquake Eng., Ottawa, June.
C57. Yousuf,
M. and Bagchi, A. 2007,
“Seismic Performance of a twenty-storey steel frame building”, 9th Canadian
Conf. on Earthquake Eng., Ottawa, June.
C58. El
Kafrawy, O. and Bagchi,
A. 2007 “Seismic Performance of a twenty-storey steel frame building”, 9th
Canadian Conf. on Earthquake Eng., Ottawa, June.
C59. Garabedian,
A., Bagchi, Joshi, A., Dong, J., Harffort, D., Scott, D. and Thai, T.M.
2006, “Monitoring the Dam Behaviour using Innovative Approaches based on
Linear and Nonlinear Techniques”, Annual Conference of Canadian Dam
Association (CDA 2006), Quebec City, September.
C60. Yousuf,
M., El Kafrawy O. and Bagchi, A. 2006, “Automated Analysis and
Performance Evaluation of Earthquake Resistant Steel Frame Buildings”,
ASCE/ICCCBE-XI Conference, Montreal, May.
C61. El
Kafrawy, O., Yousuf, M. and
Bagchi, A. 2006 “Computer Aided Design and Analysis of RC Frame Buildings
Subjected to Earthquakes”, ASCE/ICCCBE-XI Conference, Montreal, May.
C62. Garabedian,
A., Bagchi, A., Joshi, A. and Dong, J. 2006, “Developing an Intelligent
System for Modelling the Dam Behaviour Based on Statistical Pattern
Matching of Sensory Data”, ASCE/ICCCBEXI Conference, Montreal, May.
C63. Bagchi,
A. 2005, “Development of a Finite Element System for Vibration Based Damage
Identification in Structures”, 2nd International Conference on
Structural Health Monitoring of Intelligent Infrastructure (SHMII’2),
Shenzen, China, 15-18 November.
C64. Bogdan,
B.A., Mufti, A.A. and Bagchi, A. 2005, “SHM data interpretation and
structural condition assessment of the Manitoba Golden Boy”, NDE02/SPIE 2005 Conference, San
Diego, 6-10 March, 2005.
C65. Humar,
J., Xu, H. and Bagchi, A. 2004, “Application of neural networks in damage
detection in structures”, Second
International Workshop on SHM of Innovative Civil Engineering Structures,
ISIS Canada Research Network, Winnipeg, Canada, September 22-23, pp
349-359.
C66. Mufti,
A.A., Neale, K., Huffman, S., Sargent D. and Bagchi, A. 2004, “GFRP Seismic
Strengthening and Structural Health Monitoring of Portage Creek Bridge
Concrete Columns”, 13th World Conference in
Earthquake Engineering, Vancouver, Canada, August 1-6, Paper #3237
(Proc. on CD ROM).
C67. Humar,
J. and Bagchi, A. 2004, “Seismic performance of concrete frame/wall
buildings designed according to NBCC-2005”, 13th World Conference in Earthquake Engineering,
Vancouver, Canada, August 1-6, Paper #1535 (Proceedings on CD ROM).
C68. Bakht,
B., Jaeger, L., Mufti, A.A., Bagchi, A. and Tadros, G. 2004, “Weighing
Truck Wheel Loads through Steel Straps of Externally-Confined Deck
Slabs”, 5th Structural
Specialty Conference, CSCE, Saskatoon, Canada, June 2-5, Paper # ST-204.
C69. Humar,
J. L., Bagchi, A. and Xu, H. 2003, “Challenges in vibration based
structural health monitoring”, First
International Conference on Structural Health Monitoring (SHM II-1'2003),
Tokyo, Japan in Nov.13-15, 2003, pp 503-511.
C70. Humar,
J. L., Bagchi, A. and Xu, H. 2003, “Vibration based damage identification
for a three span continuous steel-free deck bridge located in Canada”, International Workshop on structural
Health Monitoring of Bridges / Colloquium on Bridge Vibration (SHMB),
Kitami, Japan, September 1-2, pp 203-210.
C71. Humar,
J. and Bagchi, A. 2003, “Seismic performance of concrete frame buildings
designed according to NBCC-2005”, Extreme
Loading 2003: Conference on Response of Structure to Extreme Loading
(XL2003), Toronto, Canada, August 3-6, 2 (Proc. in CD ROM).
C72. Bagchi,
A. and Xu, H. 2003, “Structural health monitoring of the Crowchild Bridge
and the Taylor Bridge”, Intelligent
Sensing for Innovative Structures (ISIS) Canada 8th Annual
Conference, Vancouver, April 30-May.
C73. Humar,
J. L. and Bagchi, A. 2000, “Seismic level of protection in shear wall frame
structures designed according to National Building Code of Canada”, 28th Annual Conference of Canadian
Society for Civil Engineering, London, Ontario, Canada, pp 161-168,
June.
C74. Bagchi,
A. 1999, “Seismic performance of buildings designed to National Building
Code of Canada”, 8th
Canadian Conference on Earthquake Engineering, Vancouver, B.C., Canada,
pp 487-494, June.
C75. Humar,
J. L., Bagchi, A. and Xia, H. 1995, “Analysis of Soil-Structure Interaction
in the Frequency Domain”, 7th
Canadian Conference on Earthquake Engineering Montreal, Canada, June,
pp 205-212.
C76. Paramasivam,
V. and Bagchi, A. 1993, “Prediction of Non-linear Collapse Load of
Axi-symmetric Shells through Eigenvalue Buckling Analysis”, SEIKEN-IASS Symposium on non-linear
analysis and design for shell and spatial structures, Tokyo, Japan,
October, 1993, pp 113-120.
C77. Paramasivam,
V. and Bagchi, A. 1993, “Stress and Buckling Analysis of Inner Vessel of a
Fast Breeder Nuclear Reactor”, 12th
International Conference on Structural Mechanics in Reactor Technology,
SMiRT-12, Stuttgart, Germany, August, Vol E, Paper No. E08/5, pp
251-256.
C78. Paramasivam,
V. and Bagchi, A. 1993, “Linear Buckling of Axi-symmetric Shells by the
Finite Element Method”, Proc. of the
National Seminar on Application of Personal Computers in Civil Engineering,
Institution of Engineers (India), Nagpur, February, pp 236-248.
Books/Book
Chapters:
B1. Valinejadshoubi, M.V. and Bagchi,
A., 2015, “Application of BIM concepts in the Design of Energy Efficient
Buildings”, Lambert Academic Publishing,
Saarbrucken, Germany, ISBN 978-3659-78311-1.
B2. Islam, M. S., Bagchi, A. and Said,
A., 2013. “A Pattern-Based Method for Detecting Defective Sensors and
Damage in an Instrumented Bridge”, ACI Special Publication on Advanced
Materials and Sensors Toward Smart Concrete Bridges: Concept, Performance,
Evaluation, and Repair, SP 298:
201-218.
B3. Wegner,
L., Sparling, B. and Bagchi, A., 2010, “Vibration-Based Monitoring” in Monitoring Technologies for Bridge Management, edited by Bakht, B. and Mufti
A.A., Multi-Science Publishing, London, UK.
Invited Lectures/ Keynote
Presentations:
K1. Keynote Speaker, 2015, “Advances in Materials and
Technologies for sustainable Rehabilitation and Maintenance of Concrete
Bridges”, Int. Conference on Civil, Structural and Transportation
Engineering, May, Ottawa, Canada
K2. Keynote
Speaker, 2015, “Advances in
Materials and Structural Health Monitoring Technologies for Developing
Sustainable Civil Infrastructure”, Int. Conf. on Innovations in Structural Engineering
(IC-ISE-2015), Dec 14-16, Hyderabad, India.
K3. Invited Speaker, 2015, “Application
of Fibre Reinforced Polymer (FRP) in Infrastructure Repair and
Strengthening”, Winter School on "Recent Advances in Structural
Engineering and Materials", Co-sponsored by IIT Hyderabad, IC-IMPACTS
Network (Canada), ASCE & World Bank TEQUIP Program., January,
Hyderabad, India.
K4. Invited Speaker, 2015, “Advances
in Wireless Sensing Technologies for Structural Health Monitoring”,
India-Canada Workshop on "Urban Infrastructure Systems: Enhancing the
Performance of Existing Low Strength, Un-Engineered Construction",
Co-sponsored by IIT Hyderabad & IC-IMPACTS Network (Canada), January,
Hyderabad, India.
K5. Invited Speaker, 2014, “Application
of FRP in infrastructure rehabilitation in India”, Workshop on Use of FRP
in infrastructure rehabilitation,
Co-sponsored by IC-IMPACTS Network (Canada) and FOSROC Inc. (India),
February, Bangalore, India.
K6. Invited
Speaker, 2014, “Structural Health Monitoring - Research needs in India and
Canada”. Workshop on Infrastructure Management, Co-Sponsored by IC-IMPACTS
Network (Canada), IIT Roorkee, Department of Science and Technology
(India), and Canadian High Commission in India, February, New Delhi, India.
K7. Invited
Speaker, 2013, “Spectral and Fractal Analysis of Digital Images for
Evaluating Defects in Bridges”, Techno India University, August, Kolkata,
India.
K8. Visiting
Lecturer, 2013, “Structural Health Monitoring - Challenges and
Opportunities”, .May, IIT Kharagpur, India.
K9. Invited
Speaker, 2010, “Post-earthquake fire performance of structures”, ISET
Conference on Earthquake Engineering, December, Roorkee, India
K10. Visiting
Lecturer, 2010, “Post-earthquake fire performance of structures”, IIT
Delhi, India (December).
K11. Visiting
Lecturer, 2008, “Structural Health Monitoring”, IIT Delhi, India (May).
Patent Application:
P1.
Sobhani Tehrani, E., Garabedian, A., Khorasani, K., Bagchi, A., and
Joshi, A., 2008, “Infrastructure health monitoring and analysis”, United
States Patent and Trademark Office Pre-Grant Publication, April, Patno:
US20080082470.
P2.
Nguyen, T. D. and Bagchi, A., 2003, “Distributed Service Creation and
Distribution”, United States Patent and Trademark Office Pre-Grant
Publication, January, Patno: US20030005132.
Technical Reports:
R1.
Islam, M.S. and Bagchi, A. 2007, “Development of
quantitative metrics to assess the Similarity of two time history signals”,
Internal Report, Prepared for
International Truck and Engine Corporation.
R2.
Humar, J. and Bagchi, A. 2003, “Seismic Evaluation
of the Allumette Bridge”, Internal
Report, Prepared for TSH Engineers Architects and Planners (TSH Project
No. 18-12858), Ottawa, Canada.
R3.
Bagchi, A. and Humar, J.L. 2002, “Structural Health
Monitoring of Crowchild Bridge and Taylor Bridge”, Preliminary report on
ISIS project, Department of Civil and Environmental Engineering, Carleton
University.
R4.
Bagchi, A. 2000, “A Distributed and Scalable
Service Delivery Architecture for the WISE Project”, Internal Report, Protonet, Disruptive Network Technologies
Division, Nortel Networks Corporation, Ottawa, Canada.
R5.
Bagchi, A. and Paramasivam, V. 1991, “AXIS – A
Finite Element Analysis Program for the Static and Stability Analysis of
axisymmetric shells subjected to non-axisymmetric thermal and mechanical
loadings”, Report No.
CE/STR/VP/92-AXIS, Structural Engineering Lab, Department of Civil
Engineering, Indian Institute of Technology, Madras, India, 1991.
Back to Dr. Bagchi’s home
page
|
