Journal Publications

-->

Journal in pipeline

1. Avinash K Bhaskar, Muthukumaran Packirisamy and Rama B Bhat , ‘Modeling electrostatic field in MEMS devices using artificial springs in Rayleigh-Ritz method’, Jrl. of Sound and Vibration (Under Review). ISSN: 0022-460X .

2. A Bonakdar, N B Narayanan, J Dargahi M Packirisamy and R Bhat, ‘Determination of Biological Tissue Properties Using Microfabricated Piezoelectric Tactile Sensor During Minimally Invasive Surgery’, Journal of Smart Materials and Structures, Submitted. ISSN 0964-1726 (Print) ISSN 1361-665X (Online)

3. Ashwin Acharya, Muthukumaran Packirisamy, Ricardo Izquierdo, “OLED hybrid integrated Polymer Microfluidic biosensing for Point of Care Testing”, Submitted to Journal of Biomedical Microdevices Feb 2007 – Springer

4. Arvind Chandrasekaran, Ashwin Acharya, Jian Liang You, Kim Young Soo, Muthukumaran Packirisamy, Ion Stiharu, Andre Darveau, “Flow controlled Bio-immobilization on Silicon based optical microfluidic Lab-on-a-chip”, Submitted to Microfluidics and Nanofluidics 2007 – Springer

5. S. Sokhanvar, J Dargahi and M. Packirisamy,” Nonlinear Modeling and Experimental Evaluation of Soft Tissue Embedded Lumps for MIS Applications”, submitted to the

6. Arvind Chandrasekaran, Shanmugasundaram Pakkirisami, Jian Liang You, Ashwin Acharya, Muthukumaran Packirisamy, Denis Maxwell, 2007, “Bioresistive identification of Heat Shock Protein” Biosensors and Bioelectronics (Sent).

7. Arvind Chandrasekaran, Muthukumaran Packirisamy, 2007, “Enhanced bio-molecular interactions through re-circulating microflows” Journal of Nanobiotechnology (Under progress)

Journal published

Popular Journals:

1. S. Sokhanvar, J Dargahi and M. Packirisamy, “Tactile sensor acts as a human finger in minimally invasive surgery”, An article appeared in PHYSORG.COM in July 2007.

2. Amritsar Jeetender, Stiharu I. and Packirisamy M., ‘MOEMS for Bio-Enzymatic Detection’, PHOTONS, Tech Review of CIPI, Vol. 1, No. 1, Spring 2005, pp. 25-27.

3. Arvind Chandrasekaran and Muthukumaran Packirisamy, “Absorption Detection of Enzymatic Reaction using a Hybrid Integrated Biophotonic Microfluidics System” PHOTONS 2006, Tech Review of CIPI, Vol.4, Fall issue, pp 27-31.

Refereed Journals:

4. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, “Frequency Tuning AFM Optical Levers Using a Slot”, Journal of Microsystem Technologies, Accepted Oct. 24, 2007.

5. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, “Quantitative Boundary Support Characterization for Cantilever MEMS“, Sensors 2007, 7, Special Issue: "Cantilever, Microcantilevers and Nanocantilever Sensors and Biosensors", Sensors 2007, 7, 2062-2079.

6. Arvind Chandrasekaran, Ashwin Acharya, Jian Liang You, Kim Young Soo, Muthukumaran Packirisamy, Ion Stiharu, Andre Darveau, “Hybrid integrated Silicon microfluidic platform for fluorescence based biodetection” Sensors 2007, 7, 1901-1915

7. S. Sokhanvar, M. Ramezanifard, J Dargahi and M. Packirisamy, “Graphical Rendering of Localized Lumps for MIS Applications”, J of Medical Devices, ASME.Accepted August 2007.

8. S. Sokhanvar, J Dargahi and M. Packirisamy,”Influence of Friction on Piezoelectric Sensors”, J. of Sensors and Actuators, A: Physical, Accepted 2007.

9. Jianliang You, Avinash K. Bhaskar, Muthukumaran Packirisamy and Rama Bhat, “Static and dynamic evaluation of SOI based scanning micromirrors”, International Journal of Intelligent Systems Technologies and Applications (IJISTA), Accepted July 9, 2007. ISSN (Online): 1740-8873 - ISSN (Print): 1740-8865.

10. Jianliang You, M. Packirisamy, I. Stiharu,"Study of an eletrostatically actuated torsional micromirror with compliant planar springs" Journal of Microsystem Technologies, Issue 14/1, September 2007. ISSN: 0946-7076 (Print) 1432-1858 (Online).

11. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, “Computer Aided Design of Geometrically Difficult Micro-Mechanical Structures for Academic Environment”, Intl. Jrl. of Computer Applications in Technology, Special issue on "informatics in MEMS design and manufacture", Accepted on June 29, 2007. ISSN (Online): 1741-5047 - ISSN (Print): 0952-8091.

12. Rinaldi, G., Packirisamy, M. and Stiharu, I., (2006) Boundary characterization of MEMS structures through electro-mechanical testing. Sensors and Actuators A, Accepted on July 6, 2007. ISSN: 0924-4247.

13. Yunqiang Li, Muthukumaran Packirisamy, Rama B. Bhat, "Shape optimizations and static/dynamic characterizations of deformable microplate structures with multiple electrostatic actuators", Journal of Microsystem Technologies, Accepted on June 4, 2007. ISSN 0946-7076 (Print) 1432-1858 (Online).

14. Saeed Sokhanvar, Mohammad Reza Ramezanifard, Muthukumaran Packirisamy and Javad Dargahi, “Computer Aided Minimally Invasive Surgery: A reality-based soft tissue modelling approach”, International Journal of Computer Application and Technology, Special Issue on Informatics in MEMS Design and Manufacture. Accepted on June 29, 2007. ISSN (Online): 1741-5047 - ISSN (Print): 0952-8091.

15. S. Sokhanvar, M. Packirisamy and J. Dargahi, ‘A multifunctional PVDF-based tactile sensor for minimally invasive surgery’ Journal of Smart Materials and Structures, Vol. 16, 2007, pp.989-998. Considered for IoP Select, a special collection of superior articles, http://Select.iop.org.ISSN 0964-1726 (Print) ISSN 1361-665X (Online)

16. M. Arefin Anwar, M. Packirisamy and and A. K. W. Ahmed, ‘Thermally Actuated Rotary Type Micro Actuator with Curved Beams’, Jrl. of Mechanisms and Machine Theory, Accepted for publication. ISSN: 0094-114X.

17. Arvind Chandrasekaran, Amit Soni, Muthukumaran Packirisamy, “Modelling of Evanescence based Silicon-on-Insulator Rib Waveguide System for Chemical Sensing”, International Journal of Computer Application and Technology, Special Issue on Informatics in MEMS Design and Manufacture. Accepted on June 29, 2007. ISSN (Online): 1741-5047 - ISSN (Print): 0952-8091.

18. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, “Dynamic Testing of Micromechanical Structures under Thermo-Electro-Mechanical Influences”, Measurement, 40, 2007, pp. 563-574. ISSN: 0263-2241.

19. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, “Tuning the Dynamic Behaviour of Cantilever MEMS Based Sensors and Actuators”, Sensor Review, Vol. 27, No. 2. (Accepted 30/11/06, In Print). ISSN: 0260-2288

20. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, “Dynamic Analysis of Slotted MEMS Cantilevers”, International Journal of COMADEM, April 2007 Issue.10(2). Pp.13-19.ISSN: 1363-7681.

21. Yunqiang Li, Muthukumaran Packirisamy, Rama B. Bhat, “Shape optimization and dynamic characterization of multiple-electrostatically deformable microbridges", Journal of Microsystem Technologies, Vol 13, No. 7, 2006, pp. 663-675. ISSN 0946-7076 (Print) 1432-1858 (Online).

22. Arvind Chandrasekaran and Muthukumaran Packirisamy, “Absorption detection of enzymatic reaction using optical microfluidics based intermittent flow microreactor system”, IEE Proc. of Nanobiotechnology, Vol. 153, No.6, Dec 2006, pp. 137-143. ISSN: 1477-3155.

23. Arvind Chandrasekaran and Muthukumaran Packirisamy, ‘Wafer Dicing Strategic Planning Technnique for Clustered MEMS Devices’, International Journal of Product Development (IJPD), Vol4, No.3/4, 2007, pp. 296-309. ISSN (Online): 1741-8178 - ISSN (Print): 1477-9056.

24. Nagarajan Babu, Ali Bonakdar, Javad Dargahi, Muthukumaran Packirisamy, Rama Bhat, “Design and Analysis of a Micro Machined Piezoelectric Sensor for Measuring Visoelastic Properties of Tissues in Minimally Invasive Surgery”, Journal of Smart Materials and Structures, Vol. 15, 2006, pp.1684-1690. ISSN 0964-1726 (Print) ISSN 1361-665X (Online)

25. Avinash. K.B., M. Packirisamy, Bhat. R. B., ‘Bulk micromachining for SOI based microsystems using double side XeF2 etching’, special issue on Microfabrication, International Journal of Manufacturing Technology and Management (IJMTM) (Accepted 25/05/06, In-Print). ISSN (Online): 1741-5195 - ISSN (Print): 1368-2148.

26. Amritsar Jeetender, Ion Stiharu and Muthukumaran Packirisamy, ‘Bio Enzymatic Detection of Troponin C’, Journal of BioMedical Optics, Volume 11, Issue 2, March/April 2006, 021010, pp1-7. ISSN: 1083-3668.

27. Guchuan Zhu, Muthukumaran Packirisamy, Mehran Hosseini,and and Yves-Alain Peter, “Modelling and control of an electrostatically actuated torsional micromirror”, Journal of Micromechanics and Microengineering, Vol. 16, 2006, pp.2044-2052. ISSN 0960-1317 (Print) ISSN 1361-6439 (Online)

28. Gino Rinaldi, Muthukumaran Packirisamy and Ion Stiharu, ‘Boundary Characterization of Microstructures through Thermo Mechanical Testing’, Journal of Micromechanics and Microengineering, Vol. 16, 2006, pp.549-556. ISSN 0960-1317 (Print) ISSN 1361-6439 (Online)

29. Vahé Nerguizian, Mustapha Rafaf, Louis A. Dessaint, Muthukumaran Packirisamy and Ion Stiharu, “MEMS magnetic linear motor for micro applications”, WSEAS Transactions on Circuits and Systems, Issue 4, Volume 4, April 2005, pp. 267-273. ISSN 1109-2734.

30. Huijun Li, Ion Stiharu Muthukumaran Packirisamy and Vahé Nerguizian, “Micro-optical thermally actuated platform in MUMPS technology”, WSEAS Transactions on Circuits and Systems, Issue 5, Volume 4, May 2005, pp. 490-494. ISSN 1109-2734.

31. Muthukumaran Packirisamy and Hong Zhao, ‘Birefringence control in Anisotropically Micromachined SOI Waveguides’, WSEAS Transactions on Circuits and Systems, Issue 4, Volume 4, April 2005, pp. 203-210. ISSN 1109-2734 .

32. Jianliang You, Luis Flores, Muthukumaran Packirisamy and Ion Stiharu, ‘Modeling the Effect of Channel Bends on Microfluidic Flow’, IASME Transactions, Issue 1, Vol. 1, Jan. 2005, pp. 144-151. ISSN 1790-031X

33. Packirisamy M., ‘Microfabrication Influence on the Behavior of Capacitive Type MEMS Sensors and Actuators’ Sensor Review, Vol. 26, No. 1, 2006, pp. 58-65. ISSN: 0260-2288

34. Chandrasekaran A., Packirisamy M., Stiharu I. and Delage A., ‘Hybrid Bulk Micromachining Process Suitable for Roughness Reduction in Optical MEMS Devices’, Intl. Jrl. of Manu. Tech. and Mgmt.: Spl. issue on “Advances in Micro/Nano Machining Tech. for Electronic and Optical Devices”, Vol. 9, Nos. 1 /2, 2006, pp. 144-159. ISSN (Online): 1741-5195 - ISSN (Print): 1368-2148

35. Packirisamy M., Stiharu I., Li X.and Rinaldi G., ‘A Polyimide Based Resistive Humidity Sensor’, Sensor Review, Vol. 25, No. 4, 2005, pp. 271-276.

ISSN: 0260-2288

36. Stiharu I, M. Packirisamy, S. Rakheja, A. Jeetender, "Integrated microsystem for troponin-C bio-enzyme detection for Acute Myocardial Syndrome recognition", WSEAS Transactions on Circuits and Systems, Issue 5, Vol. 4, May 2005, pp. 577-585. ISSN 1109-2734.

37. Nerguizian V., Rafaf M, Packirisamy M. and Stiharu I., “Ultra violet detection sensors”, Intl. Jrl. of High Speed Electronics and Systems (IJHSES), Spl. Issue, 2005. (June 02, 2005, Accepted). ISSN: 0129-1564.

38. Sokhanvar S., J. Dargahi, M. Packirisamy, E. Esmailzadeh, “Modeling of Chemical Control of Human Respiratory System “, Intl. Journal of Biomedical Materials and Engineering, 15(6)2005, pp.467-481. ISSN: 0959-2989

39. Muthukumaran, P., R.B. Bhat and I. Stiharu, ‘Active Control of Enclosure Structural Vibration and the Resultant Interior Noise Using Artificial Neural Network’, Intl. Jrl. of Advances in Vibration Engineering, Vol.4, No. 2, April-June 2005, pp.181-198. ISSN 0972-5768

40. P. Muthukumaran, I. Stiharu and R. B. Bhat, ‘Influence of Micromachining on Dynamic Behavior of MEMS Structures’, Canadian Jrl. of Elec. and Comp. Engineering, 30(3), 2005, pp. 157-162. ISSN: 0840-8688

41. P.Muthukumaran, et.al., "Planar comb filters based on aberration-free elliptical grating facets", IEEE Jrl. Lightwave Technology. 23(3), pp. 1239-1243, 2005. ISSN: 0733-8724

42. P.Muthukumaran, et.al., "Novel architecture for design of planar lightwave interleavers", IEEE Jrl. Lightwave Technol. 23(3), pp. 1435-1440, 2005. ISSN: 0733-8724

43. Dossou K., Packirisamy M. and Fontaine M., ‘Analysis of diffraction gratings using an edge element method’, Jrl. of the Optical Society of America A., Vol. 22, No.2, Feb. 2005, pp. 278-288. ISSN 1084-7529.

44. Stiharu I., Packirisamy M. and Botef I., ‘Gaseous phase XeF2 chemical milling for MEMS Machining’, Mecatronica, 2004 (1), pp. 82-87. ISSN: 1583-7653.

45. Packirisamy M., Stiharu I. and Flores L., "Roughness Characterization of Gas Phase Micromachining Process Suitable for Fabricating Silicon Based Microsystems", Intl. Jrl. of Manufacturing Tech. and Management, Vol 7, No.s2/3/4, 2005, pp. 224-245. ISSN (Online): 1741-5195 - ISSN (Print): 1368-2148

46. Bhaskar A., Packirisamy M. and R.B. Bhat , ‘Modeling Switching Response of Torsional Micromirrors for Optical Microsystems’, Jrl. of Mechanisms and Machine Theory, Vol.39, No. 12, December 2004, pp. 1399-1410. ISSN: 0094-114X

47. Dargahi S., S. Sokhanvar, and M. Packirisamy,” Theoretical and Experimental Techniques in Using Polyvinylidene Fluoride (PVDF) Films as a Transducer in Sensor Systems”, Trans. of the Canadian Society of Mechanical Engineering, Vol. 28, No. 2B, 2004. pp.291-307. ISSN (printed): 0315-8977

48. M.Packirisamy., et.al.,’Planar Waveguide Echelle Gratings in Silica-on-Silicon’, IEEE. Photonics Technology Letters , Vol. 16, No.2, Feb. 2004, pp. 503-505. ISSN: 1041-1135

49. Rinaldi G., Packirisamy M. and Stiharu I., ‘An Improved Method for Predicting Microfabrication Influence in Atomic Force Microscopy Performances’, Intl. Jrl. of Nanotechnology, Vol.1, No.3, 2004, pp. 292-306. ISSN (Online): 1741-8151 - ISSN (Print): 1475-7435

50. Demirli. K , S.X. Cheng and P.Muthukumaran, 'Fuzzy Modeling of Job Sequencing with Substractive Clustering', Jrl. Fuzzy Sets and Systems, 137, 2003, pp. 235-270. ISSN: 0165-0114

51. Demirli. K and P.Muthukumaran. 'Fuzzy System Identification with Higher Order clustering', Jrl. of Intelligent and Fuzzy Systems, Vol. 9, No. 3-4, 2000, pp. 129-158. ISSN: 1064-1246

52. Muthukumaran.P, I.Stiharu and R.B.Bhat,'Gas Phase Xenon Difluoride Etching of Microsystems Fabricated through Mitel 1.5 ?m CMOS Process', Canadian Jrl. of Electrical and Computer Engineering, Vol. 25, No. 1, Jan. 2000, pp. 35- 41. ISSN 0840-8688

53. Muthukumaran.P, K.Demirli, I.Stiharu and R.B.Bhat. 'Boundary Conditioning Technique for Structural Tuning using Fuzzy Logic Approach', Intl. Jrl. of Computers and Structures, Jan. 2000, Vol. 74, Issue 5, pp. 547-557. ISSN: 0045-7949

54. Muthukumaran.P, R.B.Bhat and I.Stiharu. 'Boundary Conditioning Technique for Structural Tuning', Jrl. of Sound and Vibration, 220(5), 1999, 847-859. ISSN: 0022-460X

55. Muthukumaran.P, R.B.Bhat and I.Stiharu, ‘Localization of Structural Vibration and Acoustic Radiation through Boundary Conditioning’, Trans.CSME, Vol. 22, No. 4B, 1998, 519-532. ISSN (printed): 0315-8977

56. Muthukumaran.P and S.Kumaraswamy, ‘A Method for Prediction of Static Pressure Distribution in Centrifugal Impellers’, Jrl. of Aeronautical Society of India, Vol. 47, No.2, May 1995, pp 87-93. ISSN (printed): 0001-9267

57. Muthukumaran.P, S.Kumaraswamy and H.C.Radha Krishna, ‘Prediction for Assessing Cavitation Performance of Rotodynamic Pumps’, Jrl. of Irrigation and Power, Vol. 49, No.4, Oct. 1992, pp 101-117.

58. Muthukumaran.P, S.Kumaraswamy and H.C.Radha Krishna, ‘Prediction of Cavitation Behavior of Pumps’, IE(I) Jrl., Vol. 72, Jan. 1992, pp 88-95.