View source for Project build 2 presentations schedule SOEN6441 Fall 2011

==Instructions==

# read ALL the instructions on this page carefully
# select free time slots in the schedule below
# send an e-mail to <tt>paquet@cse.concordia.ca</tt> with subject "SOEN6441: project demonstration scheduling", and with the following information in the body of your e-mail (ALL this information is NECESSARY) :
## the course you are registered in
## your team number, the list of all your team members, including student IDs
## list ALL time slots in decreasing order of preference
# I will allocate time slots in a first-come-first served basis and give you a confirmation by e-mail


==Other useful information==

* all team members do not need to attend the presentation
* plan your presentation to last for 20-25 minutes
* the intent of the presentation is that you must demonstrate that your application is working according to what I asked in the assignment description
* if your application is not working, you have to make sure that you can effectively demonstrate what is currently working
* it is your responsibility to make sure that your project can be demonstrated in the laboratory
* any request for a time slot outside of the proposed schedule will be disregarded
* only the first request is processed, any further request from the same group is discarded
* all demonstrations should occur in the laboratory reserved for the course

===Schedule (November 21st, 2011)===

{| {{simpleTable}}
! {{tableHeaderCell}} | time
! {{tableHeaderCell}} | mon, nov 21st 2011    
|-
|| 11h00 || TEAM 2
|-
|| 11h30 || TEAM 1
|-
|| 13h00 || TEAM 8
|-
|| 13h30 || TEAM 14
|-
|| 14h00 || TEAM 13
|-
|| 14h30 || TEAM 6
|-
|| 15h00 || TEAM 3
|-
|| 15h30 || TEAM 5
|-
|| 16h00 || TEAM 12
|-
|| 16h30 || TEAM 7