Project build 2 presentations schedule SOEN6441 Fall 2011
From Dr. Joey Paquet Web Site
Instructions
- read ALL the instructions on this page carefully
- select free time slots in the schedule below
- send an e-mail to paquet@cse.concordia.ca with subject "SOEN6441: project demonstration scheduling", and with the following information in the body of your e-mail (ALL this information is NECESSARY) :
- the course you are registered in
- your team number, the list of all your team members, including student IDs
- list ALL time slots in decreasing order of preference
- I will allocate time slots in a first-come-first served basis and give you a confirmation by e-mail
Other useful information
- all team members do not need to attend the presentation
- plan your presentation to last for 20-25 minutes
- the intent of the presentation is that you must demonstrate that your application is working according to what I asked in the assignment description
- if your application is not working, you have to make sure that you can effectively demonstrate what is currently working
- it is your responsibility to make sure that your project can be demonstrated in the laboratory
- any request for a time slot outside of the proposed schedule will be disregarded
- only the first request is processed, any further request from the same group is discarded
- all demonstrations should occur in the laboratory reserved for the course
Schedule (November 21st, 2011)
| time | mon, nov 21st 2011 |
|---|---|
| 11h00 | TEAM 2 |
| 11h30 | TEAM 1 |
| 13h00 | TEAM 8 |
| 13h30 | TEAM 14 |
| 14h00 | TEAM 13 |
| 14h30 | TEAM 6 |
| 15h00 | TEAM 3 |
| 15h30 | TEAM 5 |
| 16h00 | TEAM 12 |
| 16h30 | TEAM 7 |
