Md Mezbahul Islam - Post Doc
 | |
| Full name | Md Mezbahul Islam |
Contents |
Education
Doctor of Philosophy (Ph.D) in Mechanical Engineering
Thesis title: Experimental investigation and thermodynamic modeling of the Mg-Cu-Ni-Y system.
Department of Mechanical and Industrial Engineering (MIE) Concordia University, Montreal, Quebec, Canada, (2012, expected)
Master of Applied Science in Mechanical Engineering'
Thesis title: Thermodynamic modeling of the Mg-Cu-Y system.
Department of Mechanical and Industrial Engineering (MIE) Concordia University, Montreal, Quebec, Canada, (2007)
Work Experience
Research Assistant, (January 2008 till to), department of Mechanical and Industrial Engineering, Concordia University – PhD project.
Research Assistant, (September 2005 to November 2007), department of Mechanical and Industrial Engineering, Concordia University – M.A.Sc project.
Teacher’s Assistant, (September 2005 till to date), department of Mechanical and Industrial Engineering, Concordia University.
Lecturer, (December 2003 to August 2005), department of Mechanical and Chemical Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur, Bangladesh.
Research work
M.A.Sc thesis work:
Thermodynamic Modeling of the Mg-Cu-Y System Mezbah M.A.Sc thesis
Thermodynamic Modeling of the Mg-Cu-Y System
Summary of the project:
Thermodynamic modeling of the Mg-Cu-Y system is carried out as a part of thermodynamic database construction for Mg alloys. This system is being modeled for the first time using the Modified Quasichemical model which considers the presence of short range ordering in the liquid.
A self-consistent thermodynamic data base for the Mg-Cu-Y system is constructed by combining the thermodynamic descriptions of the constituent binaries, Mg-Cu, Cu-Y, and Mg-Y using a suitable ternary extrapolation technique. All the three binaries have been re-optimized based on the experimental phase equilibrium and thermodynamic data available in the literature.
The constructed database is used to calculate and predict the thermodynamic properties, binary phase diagrams and liquidus projections of the ternary Mg-Cu-Y system. Calculated phase diagrams and the thermodynamic properties such as activity, enthalpy of mixing and partial Gibbs energy of the binary liquid alloys are found to be in good agreement with the experimental data reported in the literature. Moreover, for the Mg-Cu-Y ternary system, isothermal sections, vertical sections and polythermal sections are calculated, and the invariant reaction points are predicted for the first time.
