Md Mezbahul Islam - Post Doc

Md Mezbahul Islam

Full name	Md Mezbahul Islam
Email	m_i@encs.concordia.ca
Room #	EV 13-144

Contents 1 Education 2 Work Experience 3 Research work 3.1 M.A.Sc thesis work: 4 Publications

Education

Doctor of Philosophy (Ph.D) in Mechanical Engineering

Thesis title: Experimental investigation and thermodynamic modeling of the Mg-Cu-Ni-Y system.

Department of Mechanical and Industrial Engineering (MIE) Concordia University, Montreal, Quebec, Canada, (2012, expected)

Master of Applied Science in Mechanical Engineering'

Thesis title: Thermodynamic modeling of the Mg-Cu-Y system.

Department of Mechanical and Industrial Engineering (MIE) Concordia University, Montreal, Quebec, Canada, (2007)

Work Experience

Research Assistant, (January 2008 till to), department of Mechanical and Industrial Engineering, Concordia University – PhD project.

Research Assistant, (September 2005 to November 2007), department of Mechanical and Industrial Engineering, Concordia University – M.A.Sc project.

Teaching Assistant, (September 2005 till now), department of Mechanical and Industrial Engineering, Concordia University.

Lecturer, (December 2003 to August 2005), department of Mechanical and Chemical Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur, Bangladesh.

Research work

M.A.Sc thesis work:

Thermodynamic Modeling of the Mg-Cu-Y System Mezbah M.A.Sc thesis

Thermodynamic Modeling of the Mg-Cu-Y System

Summary of the project:

Thermodynamic modeling of the Mg-Cu-Y system is carried out as a part of thermodynamic database construction for Mg alloys. This system is being modeled for the first time using the Modified Quasichemical model which considers the presence of short range ordering in the liquid.
A self-consistent thermodynamic data base for the Mg-Cu-Y system is constructed by combining the thermodynamic descriptions of the constituent binaries, Mg-Cu, Cu-Y, and Mg-Y using a suitable ternary extrapolation technique. All the three binaries have been re-optimized based on the experimental phase equilibrium and thermodynamic data available in the literature.
The constructed database is used to calculate and predict the thermodynamic properties, binary phase diagrams and liquidus projections of the ternary Mg-Cu-Y system. Calculated phase diagrams and the thermodynamic properties such as activity, enthalpy of mixing and partial Gibbs energy of the binary liquid alloys are found to be in good agreement with the experimental data reported in the literature. Moreover, for the Mg-Cu-Y ternary system, isothermal sections, vertical sections and polythermal sections are calculated, and the invariant reaction points are predicted for the first time.

Publications

Journal Publications

3. Md. Mezbahul-Islam and M. Medraj, “A Critical Thermodynamic Assessment of the Mg-Ni, Ni-Y Binary and Mg-Ni-Y Ternary Systems”, CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), Vol. 33, Issue 3, 478-486, (2009).

2. Md. Mezbahul-Islam, D. Kevorkov and M. Medraj, “The Equilibrium Phase Diagram of the Magnesium-Copper-Yttrium System”, The Journal of Chemical Thermodynamics, Vol. 40, Issue 7, 1064-1076 (2008).

1. Chowdhury M.N.A., Patwari M.A.U. and Islam Md. M., "Designing and study of a Material Handling System with Auto Synchronizing Technique for Flexible Productivity Control", International Journal of Engineering & Technology (IJET), Vol. 3, Issue 1,7-16, (2006).

Conference Publications

5. Md. Mezbahul-Islam and M. Medraj, “Thermodynamic modeling of the Mg-Cu-Ni ternary system using the modified quasichemical model”, COM 2011, October 3-6, 2011, Montreal, Canada. Accepted for publication.

4. Mohammad Mezbahul-Islam,Elhachmi Essadiqi,Mamoun Medraj,A Differential Scanning Calorimetric Study of the Mg-Cu-Y System.pdf - Spencer, 2008, Review

4. Md. Mezbahul-Islam and M. Medraj, “Experimental study on the Cu-Mg-Ni-Y system”, Thermec, International conference on processing & manufacturing of advanced materials, August 1-5, 2011, Quebec City, Canada. Accepted for publication.

3. Md. Mezbahul-Islam and M. Medraj, "Isothermal section of the Mg-Ni-Y system at 400°C", Thermec, International conference on processing & manufacturing of advanced materials, August 1-5, 2011, Quebec City, Canada. Accepted for publication.

2. Md. Mezbahul-Islam and M. Medraj, “Thermodynamic Evaluation of the Mg-Ni-Y Ternary System”, Proceedings of the Materials Science and Technology (MS&T), 1017-1028, Pittsburgh, USA, (October 5-9, 2008).

1. Md. Mezbahul-Islam and Chowdhury M.N.A. "Design of a Control System for Flexible Material Handling System to synchronize the speed of its different Elements", Proceedings of the 4th International Conference of Mechanical Engineers, The Institution of Engineers, Bangladesh, 289-295, December 29-31,2004.