References from HB2000 Workshop 10

ANSI/ASHRAE Standard 55-1992, Thermal environmental conditions for human occupancy, ASHRAE, Atlanta.

ASTM, 1994, Moisture control in buildings, (edited by H. R. Trechsel), ASTM, Philadelphia.

Berglund, L, 1998, Comfort and humidity, ASHRAE Journal, 40(8), 35-41.

Besant, R.W. and Simonson C.J., 2000, Air-to-air energy recovery, ASHRAE Journal, 42(5), 31-42.

Clausen, G., Rode, C., Bornehag, C.-G. and Sundell J., 1999,. Dampness in buildings and health. Interdisciplinary research at the International Centre for Indoor Environment and Energy, In: Proceedings of the 5th Symposium on Buildings Physics in the Nordic Countries, G?teborg.

Cooper-Arnold, C., et al., 1997, Moisture and lung disease: Population attributable risk calculations, In: Proceedings of the ISIAQ 5th International Conference on Healthy Buildings. Vol 1, 213-218.

Crawley, D.B., Lawrie, L.K., Pedersen, C.O. and Winkelmann, F.C., 2000. EnergyPlus: energy simulation program, ASHRAE Journal,. 42(4), 49-56.

Cunningham, M.J., 1992, Effective penetration depth and effective resistance in moisture transfer. Building and Environment, 27(3), 379-386.

Dales, R. E, et al., 1991, Adverse health effects among adults exposed to home humidity and mould, Am. Rev of Respiratory Diseases. 143, 505-509.

Fang, L., Clausen, G. and Fanger, P.O., 1998, Impact of temperature and humidity on the perception of indoor air quality, Indoor Air, 8, 80-90.

Fang, L., Clausen, G., Fanger, P.O., 1999, Impact of temperature and humidity on chemical and sensory emissions from building materials. Indoor Air, 9(4), 193-201.

Grau, K. and Wittchen, K.B., 1999, Building design system and cad integration,. In: Proceedings of IBPSA Building Simulations '99, Kyoto, Japan. See also: http://www.sbi.dk/english/publishing/software/bsim2000/mainmenu.htm

Green, G.H, 1985, Indoor relative humidities in winter and the related absenteeism, ASHRAE Trans., 91(1B) 643-653.

Harderup, L-E, 1998, Humidity of the indoor air considering non stationary phenomena, Lund University, Department of Building Physics, Lund, Sweden (in Swedish).

Harderup, L-E, 1999, Humidity of the indoor air and on internal surface layers, research project started as a part of the nation wide key action project called the Healthy Building, December, Lund University, Sweden.

Harriman, L.G., Plager, D. and Kosar, D., 1997, Dehumidification and cooling loads from ventilation air, ASHRAE Journal, 39(11), 37-45.

Harriman, L.G., Witte, M.J., Czachorski, M. and Kosar, D.R., 1999, Evaluating active desiccant systems for ventilating commercial buildings, ASHRAE Journal, 41(10), 28-37.

IEA, Catalogue of Material Properties, IEA Annex 14, Vol.3, 1991

Jones, R., 1993, Modelling water vapour conditions in buildings. Building Serv. Eng. Res. Technol. 14(3), 99-106.

Kamel, A.A., Swami, M.V., Chandra, S. and Fairey, P.W., 1991, An experimental study of building-integrated off-peak cooling using thermal and moisture ("enthalpy") storage systems, ASHRAE Trans., 97(2), 240-244.

Kerestecioglu, A.A., Swami, M.V. and Kamel, A.A., 1990, Theoretical and computational investigation of simultaneous heat and moisture transfer in buildings: "effective penetration depth" theory, ASHRAE Trans., 96(1), 447-454.

Larsen A., Frost, L., Funch, L.W. and Jensen, L.K., 1999, Emission of volatile organic compounds from wood and wood-based materials, Danish EPA. Internet. 12.07.1999. Available: http://www.mst.dk/200002pubs/87-7909-504-6/default_eng.htm

Padfield, T. 1998. The Role of Absorbent Material in Moderating Changes of Relative Humidity. Ph. D. thesis in the Department of Structural Engineering and Materials, Technical University of Denmark.

Plathner, P., Littler, J. and Cripps, A., 1998, Modelling water vapour conditions in dwellings, In: Proceedings of the 3rd International Symposium on Humidity and Moisture, London. Vol. 2, 64-72.

Plathner, P., Littler, J. and Stephen, R., 1999, Dynamic water vapour sorption: measurement and modelling, Proceedings of IA99, 1, 720-725.

Rodriguez, E., Baali?a, A., Molina, M. Santaballa, J.A., V¨˘zquez, A., Castellanos, L.R., Infante, C., 2000, Indoor/outdoor humidity in mild climate domestic buildings in A Coru?a (Spain), In: Proceedings of Healthy Buildings 2000 conference, Helsinki.

Rudd, A.F., 1994, Development of moisture storage coatings for enthalpy storage wallboard, ASHRAE Trans., 100(1), 84-90.

Salonvaara, M.H., 1998, Prediction of hygrothermal performance of building envelope parts coupled with indoor climate, ASHRAE Trans., 104(2), 908-918.

Sepp?nen, O., Fisk, W. and Mendell, M., 1999, Association of ventilation rates and CO2-concentrations with health and other responses in commercial and institutional buildings, Indoor Air, 9(4), 226-252.

Simonson, C.J. and Salonvaara, M.H., 2000, Mass transfer between indoor air and a porous building envelope: Part I - Field measurements and Part II - Validation and numerical studies, In: Proceedings of Healthy Buildings 2000 conference, Helsinki.

Tsuchiya, T. and Sakano, K., 1993, Computer simulation of multi room temperature and humidity variation under variable infiltration conditions, In: Proceedings of the 3rd international building performance simulation conference, 401-406.

Teischinger, A., 1990, Relations between sorption activity of wood and air relative humidity. Wood, 45(9), 249-254 (In Slovak).

Ten Wolde, A., 1992, Ventilation, humidity, and condensation in manufactured houses during winter. ASHRAE Trans., 104, 103-115.

Toftum J., Jorgensen, A.S. and Fanger, P.O., 1998, Upper limits of air humidity for preventing warm respiratory discomfort, Energy and Buildings, 28, 15-23.

Tolstoy N., 1993, Humidity levels in the Swedish housing stock, In: Proceedings of Indoor Air '93, Helsinki, Vol. 6.

Wargocki, P., Wyon, D.P., Baik, Y.K., Clausen, G. and Fanger P.O., 1999, Perceived air quality, sick building syndrome (SBS) symptoms and productivity in an office with two different pollution loads, Indoor Air, 9(3), 165-179.

Wolkoff, P., 1998, Impact of air velocity, temperature, humidity, and air on long-term VOC emissions from building products, Atmospheric Environment, 32, 2659-2668.