Publications
BOOKS
R.A.L. Drew, M.D. Pugh and M. Brochu (Editors), Proceedings of the International Symposium on Metal/Ceramic Interactions, (CIM/MetSoc publication), 2002.
R.A.L. Drew, "Aluminum Nitride-Properties, Processing and Applications," Chapter in Advanced Ceramic Materials, Key Engineering Materials, vol. 122-124, Trans. Tech. Publications (TTP), Switzerland, 1996.
R.A.L. Drew and H. Mostaghaci (Editors), Proceedings of the International Symposium on Developments and Applications of Ceramics and New Metal Alloys, (CIM/MetSoc publication), 1993.
R.A.L. Drew, "Nitrogen Glasses", Research Reports in Materials Science, (Parthenon Press), 1986
REFEREED JOURNAL PAPERS
- A.J. Klinter, C.A. Leon and R.A.L. Drew, “The Optimum Contact Angle Range for Metal Foam Stabilization: an Experimental Comparison with the Theory” J. Mater. Sci. 45(8) (Special Issue), pp 2174-2180, 2010.
- A.J. Klinter, C.A. Leon and R.A.L. Drew, “Wetting Phenomena of Al-Cu alloys on Sapphire”, Acta Materialia 58, pp. 1350-1360, 2010.
- J. A. Fernie, R. A. L. Drew and K. M. Knowles, “Joining of Engineering Ceramics” Inter. Mater. Rev., 54(5), pp 283-331, 2009.
- O. Ozdemir, J.E. Gruzleski and R.A.L. Drew, “Effect of Low-levels of Strontium on the Oxidation Behavior of Selected Molten Aluminum-Magnesium Alloys”, Oxid. Met. 72, pp 241-257, 2009.
- R Vintila, J Milligan, R A.L. Drew, M Brochu,”Formation of Nanostructures and Solid Solubility Extension in Cryomilled Al-Cu and Al-Si Powders”,Canadian Metallurgical Quarterly 48(1), pp 33-44, 2009
- P. M. Proa-Flores, R. A. L. Drew, “Production of Aluminum Foams with Ni-coated TiH2 Powder”. Advanced Engineering Materials, 10(9) pp 830-834 , 2008
- A. J. Klinter, G. Mendoza-Suarez, R. A.L. Drew: Wetting of pure aluminum and selected alloys on polycrystalline alumina and sapphire, Materials Science and Engineering: A495 (1-2) Special Issue, pp 147-152, 2008
- N. Al-Aqeeli, G. Mendoza-Suarez, R.A.L. Drew, “XRD and TEM Characterization of Al-Mg-Based Nanocomposite Alloys”, Rev.Adv.Mater.Sci. 18, 231-235, 2008.
- N. Al-Aqueeli, G. Mendoza-Suarez, C. Suryanarayana, and R.A.L. Drew, “Development of new Al-based nanocomposites by mechanical alloying”, Mater. Sci. & Eng., A480 pp 392-396, 2008
- C.A. Gonzalez, W.F. Caley, R.A.L. Drew, “Copper matte penetration resistance of basic refractories”, Met and Mater Trans B 38 (2) pp 167-174, 2007
- C. Probst, R. Gauvin and R.A.L. Drew,”Imaging of carbon nanotubes with tin-palladium particles using STEM detector in a FE-SEM”, Micron 38 (4) pp 402-408, 2007
- C.A. Leon and R.A.L. Drew, “Role of Interlayers in the Infiltration of Metal-Ceramic Composites”, Current Opinions in Solid-State and Materials Science, 9, pp 211-218, (invited paper) 2006.
- M. Medraj, R. Hammond, M.A. Parvez, and W.T. Thompson, “High temperature neutron diffraction study of the Al2O3-Y2O3 system,” J. Europ. Ceram. Soc. 26 (16): 3515-3524 2006.
- Jalilian F, Jahazi M, Drew RAL, “Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal,” Mater. Sci. & Eng A423 (1-2): pp 269-281, 2006
- M. Brochu, F. Edelmann, R. Valin and R.A.L. Drew, “Transient Liquid Phase Bonding of Ceramics and Metal Matrix Composites”, Adv. Sci. and Tech., 45, pp 1588-93, 2006.
- C.A. Leon, G. Mendoza and R.A.L. Drew, “Wettability and Spreading Kinetics of Molten Aluminum on Copper-coated Ceramics”, J. Mater. Sci. 41, pp 5081-87, 2006.
- P. Wanjara, R.A.L. Drew, S. Yue and J Root, “Hot Working of TiC Reinforced Titanium Alloy Composite,” Can. Met. Quart., 45(3), pp311-328, 2006.
- J. Lemus-Ruiz, C. Leon-Patino and R.A.L. Drew, “Self-joining of Si3N4 using metal interlayers”, Met. & Mater. Trans 37A, pp 67-75, 2006.
- P. Wanjara, R.A.L. Drew and S. Yue, “Application of Small Specimen Testing Technique for Mechanical Property Assessment of Discontinuously Reinforced Composites” Mater. Sci. & Tech., 22(1), pp 61-71.
- Leon CA, Arroyo Y, Bedolla E, Aguilar EA, Drew RAL, “Properties of AIN-based magnesium-matrix composites produced by pressureless infiltration”, Mater. Sci.Forum, 509, pp 105-110, 2006
- N. Al-Aqeeli, G. Mendoza and R.A.L. Drew, “Phase evolution of Mg-Al-Zr nanophase alloys prepared by mechanical alloying”, J. Alloys and Compounds, 400(1-2), pp 96-99, 2005.
- M. Brochu and R.A.L. Drew, “Combining thermodynamics and DSC to characterize the melting and wetting behavior of a composite powder used for joining ceramics,” J. Mater. Sci. 40(9/10), pp 2243-2247, 2005.
- C. Rodriguez, W.F. Caley and R.A.L. Drew, “Penetration and Dissolution of Magnetite Coatings by Copper Converter Melts”, Can. Mat. Quart. 44(3), 313-322, 2005
- M. Brochu, H. Demers, R. Gauvin, M.D. Pugh and R.A.L. Drew, Determination of E2 for Nitride Ceramics using FE-SEM and the Duane-Hunt Limit Procedure,” Microscopy and Microanalysis 11, pp 1-10, 2005.
- M. Brochu, M.D. Pugh and R.A.L. Drew, Fabrication of a Composite Powder and Utilization as Active Brazing Alloy, J. Mater. Sci., 40, pp 1485-93, 2005
- M. Medraj , Y. Baik, W.T. Thompson and R.A.L. Drew, “Understanding AlN sintering through computational thermodynamics combined with experimental investigation”, J. Mater. Process. Tech., 161 (3), pp415-422, 2005
- M. Brochu, M.D. Pugh and R.A.L. Drew, Brazing of Si3N4 Ceramic to an Iron Aluminide Alloy using Cu Interlayer, Ceram. Inter., 30, pp 901-10, 2004.
- M. Brochu, M.D. Pugh and R.A.L. Drew, Joining Silicon Nitride Ceramic using a Composite Powder as Active Brazing Alloy, Mat. Sci. & Eng. A, A394 (1-2), pp 34-42, 2004.
- M. Brochu, M. D. Pugh and R. A. L. Drew, “PTLPB of Si3N4 to FA-129 using nickel as a core interlayer” Int. Journal of Refractory Metals and Hard Materials, 22(2-3), pp 95-103, 2004.
- M. Brochu, M.D. Pugh, S.F. Corbin and R.A.L. Drew, Assessment of Melting Behavior of Coated Powders, Mat. Sci. & Eng., A369, pp 56-65, (2004)
- Medraj M, and Drew R.A.L, The role of phase equilibria in AlN sintering Silicates Industriels” 69 (5-6): 131-139 Sp. Iss. 1 May-Jun 2004 (invited)
- M. Brochu, M.D. Pugh and R.A.L. Drew, Effect of Titanium Addition during Copper-Iron Aluminide Alloy Interaction, J. of Alloys and Compounds, 366, pp 171-181, 2004.
- M. Brochu, M.D. Pugh and R.A.L. Drew, Wetting Behaviour of Copper on an Iron Aluminide Alloy, Intermetallics, 12, pp 289-94, 2004.
- Lopez A.H., Leon C.A., Kennedy A.R., Drew R.A.L, Bedolla E. Spreading mechanism of molten Al-Alloys on TiC substrates MATERIALS SCIENCE FORUM pp 416-4: 395-400 2003
- Medraj M, Hammond R, Thompson W.T., Drew R.A.L. High-temperature neutron diffraction of the AlN-Al2O3-Y2O3 system JOURNAL OF THE AMERICAN CERAMIC SOCIETY 86 (4) pp 717-726 APR 2003
- M. Sivasundaram, R.A.L. Drew, W.F. Caley, “Mineralogical Aspects of Devitrified Pulp and Paper Fly Ash,” CMQ, 42(1), pp113-120, 2003.
- J. Lemus and R.A.L. Drew, “Joining of silicon nitride with titanium foil interlayer”, Mater. Sci and Eng. A352, pp169-78, 2003.
- A. Conteras, C.A. Leon, R.A.L. Drew and E. Bedolla, “Wettability and spreading kinetics of Al and Mg on TiC,” Scripta Mater. 48, pp1625-30, 2003.
- M. Medraj, R. Hammond, J. Root, W.T. Thompson, R.A.L. Drew, “Phase Equilibria, Thermodynamic Modeling and Neutron Diffraction of the AlN-Al2O3-Y2O3 System” CMQ Vol 42 (4) pp 495-507, 2003.
- E.A. Aguilar and R.A.L. Drew, “Kinetic Study of Amorphous Yttria-Alumina Fibers by DTA,” J. Amer. Ceram. Soc., 86(1), pp 43-48, 2003.
- A. Albiter, M. Salazar, E. Bedolla, R. A. L. Drew and R. Perez, “Improvement of the mechanical properties in a nanocrystalline NiAl intermetallic alloy with Fe, Ga and Mo additions,” Mater. Sci. and Eng. A347(1-2), 2003, pp 154-164.
- M. Medraj, R. Hammond, J. Root, W.T. Thompson, R.A.L. Drew, “The equilibrium in the AlN-Al2O3-Y2O3 system-thermodynamics and neutron diffraction,” Applied Phys. A74, S1188-1191, 2002.
- C.A. Leon and R.A.L. Drew, “The Influence of Nickel Coating on the Wettability of Aluminum on Ceramics,” Composites A, 33, pp1429-32, 2002.
- E.A. Aguilar, C.A. Leon, A. Contreras, V.H. Lopez, R.A.L. Drew and E. Bedolla, “Wettability and Phase Formation in TiC/Al Alloy Assemblies” Composites A, 33, pp1425-28, 2002.
- C.A. Leon, V.H. Lopez, E. Bedolla and R.A.L. Drew, “Wettability of TiC by Commercial Aluminum Alloys”, J. Mater. Sci., 37, pp3509-3514, (2002).
- M. Zarinejad and R.A.L. Drew “Second phase evolution in a yttria-sintered aluminum nitride ceramic” Mater. Sci. Forum 383, pp55-67 (2002)
- C.A. Leon and R.A.L. Drew, “Small Punch Testing for Assessing the tensile Strength of Gradient Al/Ni-SiC Composites”, Mater. Lett., 56 (11), pp 812-16, (2002).
- C.A. Leon, E.A. Aguilar, R. Quintana and R.A.L. Drew, “Determination of Metal Coating Thickness on Ceramic Substrates”, J. Mater. Sci. Lett, pp1375-77, (2002).
- M.R. Bateni, S. Mirdamadi, F. Ashrafizadeh, J. Szpunar and R.A.L. Drew, “Oxidation Behaviour of Titanium Coated Copper Substrate”, Surface & Coating Technology, Vol 139/2-3, pp 192-199, 2001
- M.R. Bateni, S. Mirdamadi, F. Ashrafizadeh, J.A. Szpunar and R.A.L. Drew, “Formation of Ti-Cu Intermetallic Coatings on Copper Substrate”, Mater Manuf. Process 16 (2), pp219-228 (2001)
- A. Contreras, V.H. Lopez, C.A. Leon, R.A.L. Drew, R. Perez and E. Bedolla, “The Relation Between Wetting and Infiltration Behavior in the Al-1010/TiC and Al-2024/TiC System”, Advances on Technology of Materials and Materials ”, Advances on Technology of Materials and Materials Processing Journal (ATM), 3(1), pp27-34, (2001).
- M.R. Bateni, S. Mirdamadi, F. Ashrafizadeh, J. Szpunar and R.A.L. Drew, “Formation of Ti -Cu Intermetallic Coatings On Copper Substrate”, Materials and Manufacturing Processes Journal, vol.16, no. 2, pp. 219-228, 2001.
- C.A. Leon, A.M. Bourassa and R.A.L. Drew, “Processing of Aluminum Matrix Composites by Electroless Plating and Melt Infiltration, (invited talk) Advances in Technology of Materials and Materials Processing Journal (ATM) 2[2] pp96-106 (2000)
- J. Lemus and R.A.L. Drew, “Diffusion Bonding of Silicon Nitride to Titanium”, Brit. Ceram. Trans., 99(5), pp 200-205, 2000.
- C.A. Leon and R.A.L. Drew, “Preparation of Nickel-coated Powders as Precursors in Reinforced MMCs”, J. Mater. Sci., 35(19) pp4763-4768, 2000.
- A. Albiter, C.A. Leon, R.A.L. Drew and E. Bedolla, “Microstructure and Heat-treatment Response of Al-2024/TiC Composites”, Mater. Sci. and Eng. A289, pp 109-115, 2000.
- J.P. Anson, J.E. Gruzleski, R.A.L. Drew, M. Stucky and M. Richard, “The Measurement of the Nucleation and Growth of Microporosity during Solidification of an Aluminum-7% Silicon Casing Alloy”, Fonderie (bilingual publication), 191 (1), pp8- 21, 2000.
- Contreras, M. Salazar, C.A. Leon, R.A.L. Drew and E. Bedolla, “Kinetics of the Infiltration of Aluminum Alloys into TiC Preforms”, Mater. And Manufacturing Processes, 15(2), pp 163-82, 2000.
- E.A. Aguilar, R.A.L. Drew, B. Saruhan, C.Milz, and B. Hildmann, “Processing and Crystallization of Rapidly Solidified Al2O3-Y2O3 Fibres”, Brit. Ceram. Trans., 99(6), pp256-259, 2000.
- K. Dennis, J.E. Gruzleski and R.A.L. Drew, “Effect of Sr on the Oxidation Behaviour of an A356 Alloy”, Alumin. Trans, 3(1), pp 31-39, 2000.
- E.A. Aguilar and R.A.L. Drew, “Melt Extraction Processing of Structural Y2O3 Fibres”, J. Europ. Ceram. Soc., 20, pp1091-98, 2000.
- P. Wanjara, R.A.L. Drew, J. Root and S. Yue, “Evidence for Stable Stoichiometric Ti2C at the Interface in TiC Metal-matrix Composites,” Acta. Mater.,98 (7), pp 1443-50, 2000.
- J.P. Anson, R.A.L. Drew and J.E. Gruzleski, “The Surface Tension of Molten Aluminum and Al-Si-Mg Alloy under Vacuum and Hydrogen Atmospheres,” Met. Mater. Trans., 30B(6), pp. 1027-1032 (1999).
- A.E. Martinelli and R.A.L. Drew, “Microstructural and Mechanical Behaviour of Diffusion Bonded Si3N4-Mo Joints” J. Europ. Ceram. Society., 19(12), pp2173-81, 1999.
- A.M. Hadian and R.A.L. Drew, “ Distribution and Chemistry of Phases Developed in the Brazing of Silicon Nitride to Molybdenum,” J. Europ. Ceram. Soc., 19(8), pp1623-29, 1999.
- A.E. Martinelli, E.A. Fancello, R. Rogge, J.H. Root and R.A.L. Drew, “Neutron Diffraction and FEM Analysis of Thermal Residual Stresses on Diffusion-bonded SiC-Mo Joints,” J. Amer. Ceram. Soc., 82(7), pp1787-92, 1999.
- M. Guermazi and R.A.L. Drew, “Microstructural Evolution of SiC/Al2O3 Composites Processed by Melt Oxidation,” J. Mater. Sci. 33 pp5081-93, 1998.
- J.H. Root, P. Wanjara, S. Yue, R. Drew, A. Oddy, M. McDill, F. Mariglio, R. Fong, “ Neutron Diffraction for Industry: Optimized Processing, Failure Analysis and Regulations,” Physica B, 241-243, pp1181-88, 1998.
- A.E. Martinelli, A.M. Hadian and R.A.L. Drew, A Review on Joining Non-oxide Ceramics to Metals,” J. Can. Ceram. Soc., 66(4), pp276-83, 1997.
- M. Allahverdi, R.A.L. Drew and J.O. Strom-Olsen, "Wetting Characteristics and Fibre Extraction of Zirconia-Alumina Based Systems," J. Amer. Ceram. Soc., 80(11), pp2910-17, 1997.
- M. Allahverdi, R.A.L. Drew and J.O. Strom-Olsen, "Crystallization of ZrO2-Al2O3 Based Fibers," J. Can Ceram. Soc 66(1), pp72-78, 1997.
- A.M. Martinelli, A. M. Hadian and R.A.L. Drew, “A Review on Joining Non-Oxide Ceramics to Metals,” J. Can. Ceram. Soc. 66(4), pp276-83, 1997.
- M. Entezarian, F. Allaire, P. Tsantrizos, "Plasma Atomization: A New Process for the Production of Fine, Spherical Powders", JOM, 48(6), pp53-55, 1996
- M. Allahverdi, R.A.L. Drew, P. Rudkowski, G. Rudkowska and J.O. Strom-Olsen, "Amorphous CaO.Al2O3 Fibers by Melt Extraction", Mater.Sci. and Eng. A207, pp12-21, 1996.
- A.M. Hadian and R.A.L. Drew, "Strength and Microstructure of Silicon Nitride Ceramics Brazed with Ni-Cr-Si Alloys," J. Amer. Ceram. Soc., 79(3), pp659-65, 1996.
- R. Sarraf-Mamoury, G.P. Demopoulos and R.A.L. Drew, "Preparation of Fine Copper Powders from Organic Media by Reaction with Hydrogen under Pressure, Part I: Experimental Study, Met. Mater. Trans 27(8), pp 577-84, 1996.
- R. Sarraf-Mamoury, G.P. Demopoulos and R.A.L. Drew, "Preparation of Fine Copper Powders from Organic Media by Reaction with Hydrogen under Pressure, Part II: Kinetics of Particle Nucleation, Met. Mater. Trans 27B(8), pp 585-94, 1996.
- A.E. Martinelli, R.A.L. Drew and R. Berriche, "Correlation between Strength of SiC-Mo Diffusion Couples and Mechanical Properties of the Interfacial Reaction Products," J. Mater. Sci. Lett., 15(5), pp 307-10, 1996.
- M.Allahverdi, R.A.L. Drew and J.O. Strom-Olsen, "Melt Extracted Oxide Ceramic Fibers-The Fundamentals," J. Mater. Sci., 31, pp1035-42, 1996.
- M. Entezarian, J-P. Immarigeon, P. Tsantrizos and R.A.L. Drew, "Microstructural Analysis of Al-TiAl3 Alloys Produced Through Reactive Plasma Forming", Microstructural Science 22, pp261-271, 1995.
- A.E. Martinelli and R.A.L. Drew, "Microstructural Development during Diffusion Bonding of Silicon Carbide to Molybdenum", Mater. Sci. & Eng A, A191, pp239-47, 1995.
- T. Lebeau, J. Strom-Olsen, J.E. Gruzleski and R.A.L. Drew, "Aluminum Alloy/Alumina Based Ceramic Interactions", Mater. Charact., 35(1), pp11-22, 1995.
- D. Muscat, R.L. Harris and R.A.L. Drew, The Effect of Pore Size on the Infiltration Kinetics of Aluminum in TiC", Acta Met. Mater., 42(12), pp4155-63, 1994.
- D. Muscat and R.A.L. Drew, "Modelling of Infiltration Kinetics of Aluminum into Porous Titanium Carbide" Metall. Mater. Trans. , 25A(11), pp2357-70, 1994.
- A.M. Hadian and R.A.L. Drew, "Thermodynamic Modeling of Wetting at Silicon Nitride/Ni-Cr-Si Alloy Interfaces," Mater. Sci. & Eng. A., A189, pp209-217, 1994.
- Y. Baik, J. McDermid, K. Shanker and R.A.L. Drew, "Carbothermal Synthesis of AlN using Sucrose", J. Amer. Ceram. Soc., 77(8), pp2165-72, 1994.
- J.O. Strom-Olsen, G. Rudkowska, P. Rudkowski, M. Allahverdi and R.A.L. Drew, "Fine Metallic and Ceramic Fibers by Melt-Extraction", Mater. Sci. Eng. A179/180, pp158-62, 1994.
- J.H.D. Hampton, S.B. Savage and R.A.L. Drew, "Computer Modelling of Filter Pressing and Clogging in a Random Tube Network", Chem. Eng. Sci. J., 48 (9), pp1601-11, 1993.
- D. Muscat and R.A.L. Drew,"A Method of Measuring Metal Infiltration Rates in Porous Preforms at High Temperature", J.Mater. Sci. Lett, 12, pp1567-69, 1993.
- J.H.D. Hampton, S.B. Savage and R.A.L. Drew, "Experimental Analysis of Fine Particle Migration during Ceramic Filtration", J. Amer. Ceram. Soc. 75 (10), pp 2726-32, 1992.
- D. Muscat, M.D. Pugh, H. Pickup and D. Steele, "Microstructure of an Extruded Beta-Silicon Nitride Whisker Reinforced Composite", J. Amer. Ceram. Soc., 75 (10), pp 2713-17, 1992.
- D. Muscat, K. Shanker, and R.A.L. Drew, "TiC/Al Composites by Melt Infiltration", Mat. Sci. & Tech., 8 (11), pp971-76, 1992.
- J.H.D. Hampton, S.B. Savage and R.A.L. Drew, "Modelling Clogging during Filtration of Ceramic Suspensions", Brit. Ceram. Trans. & J.,91(4), pp103-107, 1992.
- M.D. Pugh, L.C. Zarnon and R.A.L. Drew, "Heat treatment of Controlled Composition Y-sialon Ceramics", Can. Met. Quart., 31(3), pp 211-216, 1992.
- K. Shanker, L. Mavropoulos, R.A.L. Drew and P. Tsantrizos," Properties of TaC based Metal Matrix Composites Produced by Melt Infiltration," Composites, 23(1), pp47-53, 1992.
- L. Zarnon and R.A.L. Drew, "Dispersion Methods of Y2O3 in Si3N4", Journ. Am. Ceram. Soc., 72(3), pp C495-498, l989.
- C. Brayman, M.D. Pugh and R.A.L. Drew, "Ball Milling and Sintering of Bayer Aluminas", Can. Met. Quart., 28(4), 1989.
- R.A.L. Drew, "Commercial Silicon Nitride Powder Characteristics, Synthesis and Sintering" Ceramica, (invited paper), 35(237), pp129-134, 1989.
- M.D. Pugh and R.A.L. Drew, "Enhanced Processing of Sintered Silicon Nitride", J. Can. Ceram. Soc., 58(2), pp 45-49, 1989.
- J.R. McDermid, M.D. Pugh and R.A.L. Drew, "The Interaction between Reaction Bonded Silicon Carbide and Inconel 600 with a Nickel-Based Brazing Alloy", Met. Trans. 20A, pp 1803, 1989.
- M.H. Mulazimoglu, R.A.L. Drew and J.E. Gruzleski,"Solution Treatment Study of Cast Al-Si Alloys by Electrical Conductivity", Can. Met. Quart., 28(3), pp251-258, 1989.
- F. de Mestral and R.A.L. Drew, "Calcium Phosphate Glasses and Glass-Ceramics for Medical Applications", J. Eur. Ceram. Soc., 5, pp 47-53, l989.
- M.H. Mulazimoglu, R.A.L. Drew and J.E. Gruzleski, "The Electrical Conductivity of Cast Al-Si Alloys in the Range 2 to l2.6 wt. pct. Silicon", Met. Trans., 20A, pp 383-89, 1989.
- H. Hampton, R.A.L. Drew and S.B. Savage, "Experimental Analysis and Modeling of Slip Casting", J. Amer. Ceram. Soc., 71(12), pp. 1040-45, 1988.
- M.H. Mulazimoglu, R.A.L. Drew and J.E. Gruzleski, "The Effect of Sr on the Electrical Resistivity and Conductivity of Al-Si Alloys", Met. Trans. 18A, pp. 94l-947 1987.
- D. Argo, R.A.L. Drew and J.E. Gruzleski, "A Simple Electrical Conductivity Technique for Measurement of Modification and Dendrite Arm Spacing in Al-Si Alloys", Trans. AFS, 95, pp455-463, 1987.
- R.A.L. Drew, "Canadian Structural Ceramics Scene", Can. Ceram. Quart., 60(3), pp. 9-12 (1987).
- R.A.L. Drew, B. Closset and J.E. Gruzleski, "Eutectic Silicon Shape Control by In Situ Measurement of Electrical Resistivity", Trans. AFS., 94, 9-l6, 1986.
- S. Hampshire, R.A.L. Drew, and K.H. Jack, "Oxynitride Glasses", Phys. Chem. Glasses, 26(5), pp. 182-186, 1985.
- B. Closset, R.A.L. Drew, J.E. Gruzleski and K.L. Pirie, "Etude par résistivité électrique de la microstructure des alliages de fonderie Al-Si-Mg traités thermiquement", Mem. Sci. Rev. Met., pp. 165-179, avril 1985.
- R.A.L. Drew, W.M. Williams and W.B. Muir, "Differential Resistivity for Annealing Studies", J. Phy. E. (Sci. Instrum) 18, pp. 30-3l, 1985.
- R.A.L. Drew, W.B. Muir and W.M. Williams, "Differential Resistivity Measurement for Monitoring Annealing", Met. Trans. 14A pp. 175-182, 1983.