Ahmad Mostafa - Post Doc
Ahmadomar82 (Talk | contribs) |
Ahmadomar82 (Talk | contribs) |
||
| Line 32: | Line 32: | ||
<br> | <br> | ||
| − | [[Image:MonteCarlo Scope.jpg|401x335px|MonteCarlo Scope.jpg]]<br> | + | [[Image:MonteCarlo Scope.jpg|center|401x335px|MonteCarlo Scope.jpg]]<br> |
<br> | <br> | ||
Revision as of 22:54, 2 February 2012
 | |
| Full name | Ahmad Omar Mostafa |
| ah_mosta[at]encs.concordia.ca | |
| Room # | EV13.205 |
I am materials engineer, I have a very good experience in metals manufacturing, fabrication, and heat treatment. Also, I have extensive knowledge in steel hardening on both scales (surface and through hardening) using several techniques, such as: electric resistance furnaces, salt bath furnaces, carburizing and carbonitriding, and flame hardening. Furthermore, I worked with Prof. Adnan I.O. Kilani as a research assistant for designing and manufacturing metal forming dies (deep drawing and asymmetric-angle extrusion dies). To fulfill my ambition, I decided to complete my Ph.D study in Concordia University under the supervision of Dr. Mamoun Medraj as a step of coupling my practical experience with the academic part.
Contents |
Education
- January, 2011 - present:
PhD student in Concordia University/Faculty of Mechanical Engineering, under the supervision of Dr. Mamoun Medraj, Montreal, Canada.
- 2006 - 2009:
Masters Degree in Industrial engineering/Manufacturing and design under the supervision of Prof. Adnan Alkilani, from Jordan University, Amman, Jordan.
- 2000 - 2004:
Bachelore Degree in Materials Engineering Techniques from Technical College, Baghdad, Republic of Iraq.
Research Fields
- Alloys grain refining
- Metal forming die design (Deep drawing and asymmetric angle extrusion dies)
- Investigation of phase diagrams
Published Works
[1] A.I.O Zaid and A.O. Mostafa, Effect of Addition of Hafnium (Hf) on the Mechanical Behavior and Wear Resistance of Zinc-Aluminum Alloy 5 (ZA5), ICPR 21st, May, 2011, Stuttgart, Germany.
Awards
- Concordia University Partial Tuition Scholarship for International Students (Fall/2011 - Summer/2012).
- Ministry of Higher Education. Excellent student award (2004), Baghdad, Iraq.
Work Experience
1- From 1/8/2009 to 12/01/2011:
Working for Qaraman Co. for Bolts and Spare Parts Ltd. as:
Manager of steel heat treatment department.
2- From 1/10/2009 to 1/6/2010 (1st and 2nd semesters of 2009/2010):
Working for University of Jordan / Faculty of Engineering and Technology / Department of Industrial Engineering as a part time engineer, assisting in teaching the manufacturing processes laboratory:
i. Subjects involved:-
- Metal Casting
- Wear of Metals
- Mechanical Behavior
- Rolling of Metals
- Deep Drawing
- Blanking and Piercing of Sheet Metals
- Extrusion of Metals
3- From 1/9/2007 to 1/7/2009:
Working for Al-Balqa for Metals and Tools Co. as:
i. Technical Manager with the following duties.
- Technical Support for BOHLER special steels (Steel selection & steel heat treatment).
- Marketing of BOHLER special steels.
4- From 1/7/2006 to 31/8/2007:
Working for Al-Hijaz Engineered Machining Establishment with its sister company (National Industrial Rehabilitation Company - NIRCO) as:
i. Marketing engineer of BELZONA products.
ii.Mechanical designer using AutoCAD.
5- From 20/11/2004 to 28/2/2006:
Working for SHEBA Metal Casting Company as:
i. Production engineer
ii. Heat treatment furnace operator.
iii. Patterns designe using AutoCAD software.
iv. Preparing daily reports explaining melting and heat-treatment procedures.
