Fatile Babajide - PhD
 | |
| Full name | Fatile Babajide Oluwagbenga |
| Room # | EV13.161 |
Contents |
Education
Fatile Babajide Oluwagbenga is a Ph.D. student at the Department of Mechanical, Industrial and Aerospace Engineering, Concordia University. He obtained Master of Engineering in Advanced Materials Engineering at The Federal University of Technology, Akure, Nigeria in 2017. He also Obtained Post Graduate Diploma in Metallurgical and Materials Engineering from the same institution in 2014. He worked as a Lecturer in the Department of Glass and Ceramic Technology, Federal Polytechnic Ado-Ekiti, Nigeria before joining Concordia University as a Ph.D. student.
Research Fields
Fatile Babajide is interested in the development of Advanced Engineering Materials, Nanotechnology, Composite materials, Corrosion Engineering, and Ceramic Technology
Published Works
1. Fatile B.O., Akinruli, I.J, and Amori, A.A. “Microstructure and Mechanical Behaviour of Stir-Cast Al‑Mg‑Si Alloy Matrix Hybrid Composite Reinforced with Corn Cob Ash and Silicon Carbide”, International Journal of Engineering and Technology Innovation, Vol. 4 (4), 2014. pp 251-259 2. Alaneme, K.K., Fatile, B.O., and Borode, J.O. “Mechanical and Corrosion Behaviour of Stir-Cast Zn-27al Alloy Matrix Composites Reinforced with Groundnut Shell Ash and Silicon Carbide”, Tribology in Industry, 36 (2), 2014, pp. 195-203.
2. Alaneme, K.K., Fatile, B.O., and Borode, J.O. “Mechanical and Corrosion Behaviour of Stir-Cast Zn-27al Alloy Matrix Composites Reinforced with Groundnut Shell Ash and Silicon Carbide”, Tribology in Industry, 36 (2), 2014, pp. 195-203.
3. Akinruli, Fatile, B.O., and Idiogbe E.B. “The Potential Hazard of Cathode Ray Tube (CRT) Glass; The Nigeria Situation”, Proceedings of the Nigeria Materials Congress, 2012, pp. 212-214
4. Akinruli, I.J. and Fatile, B.O. “Ceramic Option of Disposing Garbage Cathode Ray Tubes (CRT)”, International Research Journal, Vol. 3(1), 2013, pp. 47-54
5. Matthew G.O. and Fatile, B.O. “Characterization of Vitrified Porcelain Tiles Using Feldspar from Three Selected Deposits in Nigeria”, Research Journal of Recent Sciences, Vol. 3(9) pp. 67-72, 2014.
6. Matthew G.O, and Fatile, B.O. “Groundnut Shell Ash As Alternative Raw Material For Whiteware Body Formulations”, International Journal of Research in Mechanical and Materials Engineering, Vol. 1(1), 2014.
7. Fatile B.O., Sanya O.T., and Idu, F.I. “Fabrication Characteristics and Mechanical Behavior of Fly Ash-Alumina Reinforced Zn-27Al Alloy Matrix Hybrid Composite Using Stir-Casting Technique, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, Vol. 9(10), 2015.
8. Ogundare, T.S., Fatile, B.O., and Lamidi, Y.D. “Development of Whiteware Bodies Using China Clay from Selected Deposits in Edo and Ekiti State of Nigeria”, i-manager’s Journal on Material Science, Vol. 3 (2), 2015.
9. Ogundare, T.S., Fatile, B.O., and Ajayi, O.J. “Development and characterization of parian bodies using feldspar from two selected deposits”, Leonardo Electronic Journal of Practices and Technologies, p. 147-156, ISSN 1583-1078, (27), 2016.
10. Aladesuyi O., Fatile B.O., Adedapo E.A., Ogunboyejo A.P., Ajanaku C.O., Olanrewaju I. O., Ajani O.O., and Ajanaku K.O. “Corrosion Inhibitive Effect of 2-(1-(2-Oxo-2H-Chromen-3-Yl) Ethylidene) Hydrazine Carboxamide on Zinc-Aluminum Alloy in 1.8M Hydrochloric Acid”, International Journal of Advanced Research in Chemical Science (IJARCS) Volume 3, (2), February, 2016, pp. 15-21.
11. Fatile, B.O., Adewuyi, B.O., and Owoyemi, H.T. “Synthesis and Characterization of ZA-27 Alloy Matrix Composites Reinforced with Zinc Oxide Nanoparticles, Engineering Science and Technology, An International Journal, Vol. 20, pp. 1147 – 1154, 2017.
12. Fatile, B.O., Lamidi, Y.D., Ogundare, T.S., Sanya, O.T., “Production of Enamel Stains from Igbokoda Silica Sand”, Chemistry and Materials Research, Vol.10 No.4, 2018
13. Owoeye, S.S., Oji, B., Fatile, B.O., Borisade, S.G. “Creep and thermal behavior of quarry dust-silicon carbide hybrid particles reinforced ZA-27 alloy composites using stir casting technique”, The International Journal of Advanced Manufacturing Technology, DOI: https://doi.org/10.1007/s00170-018-2243-z, 2018.
