Farjad Shadmehri
Home
Group
Publications
Research
Teaching

Publications

Patent

  1.  "Laser vision inspection system and method", United States. US10,408,603 B2, EP3198221A1, CA2962026A1, CN107076539A, WO2016046788A1.

    2. Inventors: Farjad Shadmehri

    Applicant: BOMBARDIER INC.

Journal Papers

  1. Khadem Moshir S, Hoa S V, Shadmehri F. (2021). Stress analysis of elliptical composite tubular beams using a meshless dimensional reduction method. Composite Structures. 274.

  2. Khadem Moshir S, Hoa S V, Shadmehri F. (2021). Structural analysis of composite tubes using a meshless analytical dimensional reduction method. International Journal for Numerical Methods in Engineering.

  3. Zacherl L, Shadmehri F, Rother K. (2020). Determination of Convective Heat Transfer Coefficient for Hot Gas Torch (HGT)-assisted Automated Fiber Placement (AFP) for Thermoplastic Composites. Journal of Thermoplastic Composite Materials.

  4. Khadem Moshir S, Hoa S V, Shadmehri F, Rosca D, Ahmed A. (2020). Mechanical behavior of thick composite tubes under four-point bending. Composite Structures. 242(15)

  5. Tafreshi O A, Hoa S V, Shadmehri F, Hoang D M, Rosca D. (2020). Determination of convective heat transfer coefficient for automated fiber placement (AFP) for thermoplastic composites using hot gas torch. Advanced Manufacturing: Polymer & Composite Science. 6(2)

  6. Tafreshi O A, Hoa S V, Shadmehri F, Hoang D M, Rosca D. (2019). Heat transfer analysis of automated fiber placement of thermoplastic composites using a hot gas torch. Advanced Manufacturing: Polymer & Composite Science. 5(4)

  7. Shadmehri F, Hoa S V. (2019). Digital Image Correlation Applications in Composite Automated Manufacturing, Inspection, and Testing. Applied Sciences. 9(13)

  8. Khanouki M A, Javadi Aghdam M H,Shadmehri F. (2019). Comment on Aeroelastic design optimization of thin-walled subsonicwings against divergence. Thin-Walled Structures. 137: 433-435.

  9. Shadmehri F, Hoa S V, Fortin-Simpson J, Ghayoor H. (2018). Effect of In-Situ Treatment on the Quality of Flat Thermoplastic Composite Plates Made by Automated Fiber Placement (AFP). Advanced Manufacturing: Polymer & Composite Science. 4(2)

  10. Zacchia T,Shadmehri F, Fortin-Simpson J, Hoa S V. (2018). Design of Hard Compaction Rollers for Automated Fiber Placement on Complex Mandrel Geometries. Journal of Mechanics and Automation Engineering. 8(6)

  11. Shadmehri F, Cai X, Hojjati M, Chen J, Hoa S V. (2015). Effect of autoclave process on the quality of thermoplastic composite truncated cones manufactured using automated fiber placement technique. Science and Engineering of Composite Materials. 22(2)

  12. Shadmehri F, Hoa S V, Hojjati M. (2014). The effect of displacement field on bending, buckling and vibration of cross-ply circular cylindrical shells. Mechanics of Advanced Materials and Structures. 21(1)

  13. Shadmehri F, Hoa S V, Hojjati M. (2012). Buckling of conical composite shells. Composite Structures. 94(2)

  14. Sina S A, Ashrafi M J, Haddadpour H,Shadmehri F.(2011). Flexural- Torsional Vibrations of Rotating Tapered Thin Walled Composite Beams. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering. 225: 387-402.

  15. Shadmehri F, Derisi B, Hoa S V. (2011). On bending stiffness of composite tubes. Composite Structures. 93(9): 2173-2179.

  16. Haddadpour H, Kouchakzadeh M A, Shadmehri F. (2008). Aeroelastic Instability of Aircraft Composite Wings in an Incompressible Flow. Composite Structures. 83(1): 93-99.

  17. Shadmehri F, Haddadpour H, Kouchakzadeh M A. (2007). Flexural–Torsional Behavior of Thin-Walled Composite Beams with Closed Cross-Section. Thin-Walled Structures. 45(7-8): 699-705.

  18. Haddadpour H, Navazi H M, Shadmehri F. (2007). Nonlinear oscillations of a fluttering functionally graded plate. Composite Structures. 79(2): 242-250.

Conference Papers

  1. Fontes A, Shadmehri F (2021). Failure Prediction of Composite Materials Using Deep Neural Networks. American Society for Composites, 36th Technical Conference.

  2. Zacherl L, Fontes A, Shadmehri F (2021). Three-Dimensional Heat Transfer Analysis of Hot Gas Torch (HGT)-Assisted Automated Fiber Placement of Thermoplastic Composites. American Society for Composites, 36th Technical Conference.

  3. Rajasekaran A, Shadmehri F. (2020). Modified Lap Shear Test for Automated Fiber Placement (AFP) of Steered Thermoplastic Composite Tape. American Society for Composites, 35th Technical Conference.

  4. Rebecca Rajs, Marc Palardy-Sim, Guillaume Renaud, Michael Jakubinek, Farjad Shadmehri. (2020). Experimental Testing, Modeling, and Simulation of 3D PrintedComposite Material for Morphing Wing Application. Canadian Society for Mechanical Engineering International Congress, CSME 2020.

  5. S. Khadem Moshir, S.V. Hoa, F. Shadmehri. (2019). Stress analysis of thick walled composite tubes under bending moment. 11th Canadian-International Conference on Composites,Kelowna, Canada.

  6. O. Tafreshi, S. V. Hoa, D. M. Hoang, D. Rosca, F. Shadmehri. (2019). Heat Transfer by a Moving Heat Source in Automated Fiber. Fourth International Symposium on Automated Composites Manufacturing (ACM4), Montreal, Canada

  7. Michael Jakubinek , Steven Roy, Marc Palardy-Sim, Behnam Ashrafi , Farjad Shadmehri, Guillaume Renaud, Michael Barnes , Yadienka Martinez-Rubi, Stephane Denommee, Meysam Rahmat, Benoit Simard , Ali Yousefpour , Francois Fortin, Stuart McIlwain and Wajid Chishty. (2019). Stretchable Structure for a Benchtop-ScaleMorphed Leading Edge Demonstration. The American Institute of Aeronautics (AIAA) Science and Technology Forum (SciTech), San Diego, California, United States.

  8. Hoa S V, Fortin-Simpson J, Rosca D I, Duc H M, Shadmehri F. (2018). Effect of In-Situ Treatment on the Quality of Thermoplastic Composite Tubes Made by Automated Fiber Placement (AFP). European conference on composite materials (ECCM18), Athens, Greece.

  9. Zacchia T, Shadmehri F, Fortin-Simpson J, Hoa S V. (2018). Design of Hard Compaction Rollers for Automated Fiber Placement on Complex Mandrel Geometries. The Canadian Society for Mechanical Engineering International (CSME), Toronto, Canada.

  10. Hoa S V, Shadmehri F, Fortin-Simpson J, El-Geuchy M I. (2017). Effect of Manufacturing Parameters on the Quality of Thermoplastic Composites made by Automated Fiber Placement (AFP). 21th International Conference on Composite Materials (ICCM21), Xi'an, China.

  11. Shadmehri F, Ioachim O, Pahud O, Brunel J-E, Landry A, Hoa S V, Hojjati M. (2015). Laser-Vision Inspection System for Automated Fiber Placement (AFP)Process. 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark.

  12. Ghayoor H, Shadmehri F, Hoa S V. (2014). Development of Experimental Technique for Measuring Strain and Deformation in Manufacturing of Thermoplastic Composites Using Automated Fiber Placement (AFP). The Society for the Advancement of Material and Process Engineering (SAMPE), Seattle, United States.

  13. Gorjipoor A, Ganesan R, Hoa S V, Shadmehri F. (2014). Stress analysis of a thick composite laminate with a bolted joint. 10th Canada-Japan Workshop on Composites.

  14. Hoa S V, Shadmehri F, Cai X, Fortin-Simpson J, Hubert P, Quinlan E, Brulotte X, D’Arienzo V, Beaulieu P, Dion M, Hojjati M, Chen J. (2014). Development of thermoplastic composite cones for helicopter tail boom application. American Helicopter Society (AHS), Forum 70, Montreal, Canada.

  15. Shadmehri F, Hoa S V, Hojjati M. (2013). Bending Test of Thermoplastic Composite Cone. 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.

  16. El-Geuchy M, Hoa S V, Shadmehri F. (2013). Behavior of Thick Composite Tubes under Pure Bending Load. American Society for Composites (ASC), United States.

  17. Hoa S V, Shadmehri F, ElGeuchy M, Hojjati M, Derisi B. (2013). Development of unique thermoplastic composite structures using automated fiber placements. 17th International Conference on Composite Structures (ICCS17), Portugal.

  18. ElGeuchy M, Hoa S V, Shadmehri F. (2013). Bending stiffness behavior of thick-walled composite tubes. 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.

  19. Fortin-Simpson J, El-Geuchy M, Shadmehri F, Hoa S V. (2013). Effect of processing parameters on the bending behavior of thermoplastic composite tubes made by automated firber placement process. American Society for Composites (ASC), United States

  20. Cai X, Shadmehri F, Hojjati M, Chen J, Hoa S V. (2012). Determination of Optimum Process Conditions for Processing AS4/APC-2Thermoplastic Composites by Automated Fiber Placement. The Society for the Advancement of Material and Process Engineering (SAMPE), United States.

  21. Shadmehri F, Cai X, Hojjati M, Chen J, Hoa S V. (2011). Determination of Optimal Process Parameters for Manufacturing Thermoplastic Composite Rings by Automated Fiber Placement. American Society for Composites (ASC), 26th Technical Conference (the Second Joint US-Canada Conference on Composites), Montreal, Canada.

  22. Shadmehri F, Hoa S V, Hojjati M. (2011). Buckling of conical composite shells. 16th International Conference on Composite Structures (ICCS16), Portugal.

  23. Shadmehri F, Cai X, Hojjati M, Chen J, Hoa S V. (2011). Effect of autoclave process on the quality of thermoplastic cones manufactured using automated fiber placement technique. The Society for the Advancement of Material and Process Engineering (SAMPE) conference, Long Beach, United States.

  24. Shadmehri F, Hoa S V, Hojjati M. (2010). Effect of displacement field on vibration of cross-ply circular cylindrical shells. The Canadian Society for Mechanical Engineering Conference (CSME 2010), Victoria, Canada.

  25. Shadmehri F, Hoa S V, Hojjati M. (2009). Bending analysis of cross-ply laminated conical shells. The CACSMA-ASC 24th Annual Technical Conference, Newark, Delaware, United States.