The other somewhat more independent techniques, as compared to or in content of testing, are the theoretical analysis and numerical simulation.

Related References

mold A new model for mould prediction and its application on a test roof, by Krus, M., Sedlbauer, K., Zillig, W. and Kunzel, H.M, 2001 -------- A review of testing for moisture in building elements, by Dill, M.J., 2000 structure A summary of the structural performance of single-family, wood-frame housing, by Yancey, C.W., Cheok, G.S., Sadek, F., and Mohraz, B., 1998 -------- BLWT, CFD and HAM modelling vs. the real world: bridging the gaps with full-scale measurements, by Dalgliesh, W. A., Surry, D., 2003 -------- C1199-00 standard test method for measuring the steady-state thermal transmittance of fenestration systems using hot box methods, by ASTM, 2000 ASTM thermal performance by hot box C1363-97 standard test method for the thermal performance of building assemblies by means of a hot box apparatus, by ASTM, 1997 -------- Comparaison de m¨¦thodes de mesure de flux de chaleur pour sp¨¦cimens de grandes et moyennes dimensions, by Desmarais, G., Derome, D., Rao, J., Athienitis, A., and Fazio, P., 1997 -------- E2099-00 standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems, by ASTM, 2000 -------- Effect of Air Transport Through Mold Contaminated Ductwork. , by Morse, R., Zehnter, D., 2003 -------- Environmental chamber for investigation of building envelope performance, by Fazio, P., Athienitis, A., Marsh, C. and Rao, J., 1997 -------- Experimental methods for engineers, by Holman, J. P. and Gajda, W. J., 1984 full scale test, brick veneer, steel stud wall Full scale tests of brick veneer steel stud walls - strength and rain penetration, by Drysdale, R. G. and Michael J., 1997 -------- Heat and moisture response of vented and compact cathedral ceilings: a test house evaluation, by Hens, H. and Janssens, A., 1999 -------- Measurement & Instrumentation Principles, by Morris, A.S., 2005 -------- Measurement of ventilation efficiency for indoor air quality in office buildings using carbon dioxide as a tracer gas , by Auger, M., 1997 of SIP Monotonic and cyclic performance of structrually insulated panel shear walls, by Jamison, J. B., 1997 -------- NFRC Test procedure for measureing the steady-state thermal transmittance of fenestration system, revised 1997, by NFRC, 1997 guarded hot plate measurements NIST/NRC-Canada interlaboratory comparison of guarded hot plate measurements: 1993-1997, by Zarr, R.R., Kumaran, K. and Lagergren, E.S, 1997 -------- Retarded sorption in wood. experimental study, analyses and modelling, by H?kansson, 1998 -------- Review and framework for large-scale laboratory studies on wetting and drying of building envelopes, by Fazio, P., Derome, D. and Rao, J., 2001 air barrier Testing of Air Barriers Construction Details - I & II, by Morrison Hershfield Limited, 1996 -------- Voluntary test method for thermal transmittance and condensation resistance of windows, doors and glazed wall sections, by AAMA, 1998 -------- Widely-defined measurement - An analysis of challenges, by Finkelstein, L., 2009