Conceptual Reference Database for Building Envelope Research Prev
Next

Ventilation, humidity, and condensation in manufactured houses during winter

TenWolde, A.
1994
ASHRAE Transactions, 100(t): 103-115


TenWolde, A., (1994), "Ventilation, humidity, and condensation in manufactured houses during winter", ASHRAE Transactions, 100(t): 103-115.
Abstract:
:

Laboratory scale experiments were performed on two small sample composite walls of typical building construction to determine the approximate opposing air pressure difference required to stop or significantly reduce the transmission of water vapor due to a water vapor pressure difference. The experiments used wall section samples between two controlled atmosphere chambers. One chamber was held at a temperature and humidity condition approximating that of a typical summer day, while the other chamber was controlled at a condition typical of indoor conditioned space. Vapor transmission data through the wall samples were obtained over a range of vapor pressure differentials and opposing air pressure differentials. The results show that increasing opposing air pressure differences decrease water vapor transmission, as expected, and relatively small opposing air pressure differentials are required for wall materials of small vapor permeability and large air permeability. The opposing air pressure that stopped or significantly reduced the flow of water vapor through the wall sample was determined experimentally and also compared to air pressures as predicted by an analytical model.


Related Resources:


Related Concepts


Author Information and Other Publications Notes
TenWolde, A.
Anton TenWolde, Research Physicist Research Forest Products Technologist, USDA Forest Service, Forest Products Laboratory, Madison, WI
  1. A mathematical model for indoor humidity in homes during winter
  2. Accuracy of wood resistance sensors for measurement of humidity
  3. Air pressures in wood frame walls
  4. Effect of cavity ventilation on moisture in walls and roofs
  5. Interior moisture design loads for residences
  6. Issues related to venting of attics and cathedral ceilings
  7. Manufactured housing walls that provide satisfactory moisture performance in all climates
  8. Moisture management in buildings
  9. Moisture transfer through materials and systems in buildings
  10. Performance of back-primed and factory-finished hardboard lap siding in southern florida
  11. Weather Data  



CRDBER, at CBS, BCEE, ENCS, Concordia,