Conceptual Reference Database for Building Envelope Research Prev
Next

Fast field sampling/sample preparation and quantification of volatile organic compounds in indoor air by solid-phase microextraction and portable gas chromatography

Jia, M. Y., Koziel, J. and Pawliszyn, J.
2000
FIELD ANALYTICAL CHEMISTRY AND TECHNOLOGY 4 (2-3): 73-84

Jia, M. Y., Koziel, J. and Pawliszyn, J., (2000), "Fast field sampling/sample preparation and quantification of volatile organic compounds in indoor air by solid-phase microextraction and portable gas chromatography", FIELD ANALYTICAL CHEMISTRY AND TECHNOLOGY 4 (2-3): 73-84.
Abstract:
Solid-phase microextraction (SPME) was used as a rapid, simple, convenient, and cost-effective technique to sample volatile organic compounds (VOCs) in indoor air. Concentrations of five target VOCs, including benzene, toluene, ethylbenzene, m,p-xylenes, and hexane, were determined on site in several buildings around the city of Waterloo, Canada. Samples were collected with a polydimethylsiloxane/divinylbenzene (PDMS/DVB) porous polymer-coated fiber and 1-min sampling time, followed by 15-min analysis. Fast separation and speciation of common indoor air pollutants was possible with the use of a modified, SRI portable gas-chromatography (GC) instrument, equipped with a photoionization (PID), a flame ionization (FID), and a dry electrolytic conductivity detector (DELCD) in series. The mass calibration for target VOCs was based on the diffusion-controlled extraction onto the adsorptive SPME coating. The method detection limits for the target VOCs in air were between one and nine parts per billion (ppb). Target VOC concentrations measured with SPME/fast GC were comparable to those obtained with the National Institute of Occupational Safety and Health (NIOSH) 1501 method. The use of SPME coupled to a portable GC instrument allowed for at least a tenfold reduction of the total sampling and analysis time. The short SPME sampling time combined with fast, portable GC provided a near-real-time measurement of target VOCs. The results suggest that fast air sampling with adsorptive SPME fibers can be used for analyte speciation based on diffusion coefficients. The combination of SPME and a portable fast GC proved to be a very premising technique for conducting cost-effective indoor air quality surveys and making on-site decisions to control VOC emissions

This publication in whole or part might be found online. Check the sources on the related article below. Or use search engines on the web.
Related Concepts

Author Information and Other Publications Notes
Jia, M. Y.
  1. Air sampling with porous solid-phase microextraction fibers  
Koziel, J.
  1. Air sampling with porous solid-phase microextraction fibers
  2. Design and validation of portable SPME devices for rapid field air sampling and diffusion based calibration
  3. Sampling and sample-preparation strategies based on solid-phase microextraction for analysis of indoor air  
Pawliszyn, J.
Department of Chemistry, University of Waterloo, ON, Canada. janusz@uwaterloo.ca
  1. A laboratory technique for investigation of diffusion and transformation of volatile organic compounds in low permeability media
  2. Air sampling with porous solid-phase microextraction fibers
  3. Analysis of environmental air samples by solid-phase microextraction and gas-chromatography ion-trap mass-spectrometry
  4. Design and validation of portable SPME devices for rapid field air sampling and diffusion based calibration
  5. Evolution of solid-phase microextraction technology
  6. New trends in solid-phase microextraction
  7. Recent advances in solid phase microextraction and membrane extraction with a sorbent interface
  8. Solid phase microextraction  


CRDBER, at CBS, BCEE, ENCS, Concordia,