|
- Added references: 51
- Added concepts: 4
- Added essays: 2
References
- Adhikari, A., Sen, M. M., Gupta-bhattacharya, S. and Chanda, S., (2004), Airborne viable, non-viable, and allergenic fungi in a rural agricultural area of India: a 2-year study at five outdoor sampling stations .
(28-10-05)
- EPA, (2003), A standarized EPA protocol for characterizing indoor air quality in large office buildings.
(28-10-05)
- Einberg, G., (2005), Air diffusion and solid contaminant behaviour in room ventilation -- a CFD based integrated approach.
(28-10-05)
- Sun, H., Keener, H. M., Deng, W., Michel, F. C. and Jr., , (2004), Development and Validation of 3-D CFD Models to Simulate Airflow and Ammonia Distribution in a High-Rise? Hog Building during Summer and Winter Conditions .
(28-10-05)
- Knopp, T., (2003), Finite-element simulation of buoyancy-driven turbulent flows.
(28-10-05)
- Somarathne, S., Seymour, M. and Kolokotroni, M., (2004), Transient solution methods for dynamic thermal modelling within CFD.
(28-10-05)
- Beausoleil-Morrison, I. , Clarke, J.A. , Denev, J. Macdonald, I. A. Melikov, A. , Stankov, P., (2001), Further developments in the conflation of CFD and building simulation.
(28-10-05)
- Zhai, Z. and Chen, Q..Y.., (), Impact of determination of convective heat transfer on the coupled energy and CFD simulation for buildings.
(28-10-05)
- Wirtanen, G., Miettinen, H. P., Enbom, S. and Vanne, L., (2002), Clean air solutions in food processing.
(28-10-05)
- Teshome, E. J. and Haghighat, F., (2004), Zonal Models for Indoor Air Flow - A Critical Review.
(28-10-05)
- Baines, M. J., (2001), Moving finite element, least squares, and finite volume approximations of steady and time-dependent PDEs in multidimensions.
(27-10-05)
- Rannacher, R., (2001), Adaptive Galerkin finite element methods for partial differential equations.
(27-10-05)
- Thom¨¦e, V., (2001), From finite differences to finite elements: A short history of numerical analysis of partial differential equations.
(27-10-05)
- Janz, M., Johannesson , B. F., (2001), Measurement of the moisture storage capacity using sorption balance and pressure extractors.
(26-10-05)
- Johannesson, B., (2001), Restrictions on the rate of absorption when evaluating sorption isotherms obtained using a micro-calorimetric technique.
(26-10-05)
- Bomberg, M., Pazera, M., Plagge, R., (2005), Analysis of selected water absorption coefficient measurements.
(26-10-05)
- Abdou, A. A., Budaiwi , I. M., (2005), Comparison of thermal conductivity measurements of building insulation materials under various operating temperatures.
(26-10-05)
- Horvat, M., Fazio, P., (2003), Performance evaluation protocol for full-scale wood-frame building envelopes .
(26-10-05)
- WTO, (1989), Panel Report, Canada/Japan -- Tariff on imports of Spruce, Pine, Fir (SPF) dimension lumber, adopted 19 July 1989.
(18-10-05)
- Industry Canada,, (2005), Technology roadmap: lumber and value-added wood products.
(18-10-05)
- Washington State Energy Code, (2005), Builder's field guide 5th edition .
(18-10-05)
- Kolokotroni, M., Littler, J., (1992), Moisture Movement : A study using tracer gas techniques and CFD modelling.
(17-10-05)
- Sherman, M. H., (), Air Infiltration Measurement Techniques.
(17-10-05)
- Gana, G. and Awbia, H. B., (1994), Numerical simulation of the indoor environment .
(17-10-05)
- Teodosiu, C., Hohota, R., Rusaou?n, G. and Woloszyn , M., (2003), Numerical prediction of indoor air humidity and its effect on indoor environment.
(17-10-05)
- Chen, Q., (1999), Prediction of room air motion by Reynolds-stress models .
(17-10-05)
- Olesen, B. W., (2004), International standards for the indoor environment.
(17-10-05)
- Schalin A. and Nielsen P. V., (2004), Impact of turbulence anisotropy near walls in room airflow.
(17-10-05)
- S?rensen, D. N. and Nielsen, P. V., (2003), Quality control of computational fluid dynamics in indoor environments.
(17-10-05)
- Wasiolek P. T., Whicker J. J., Gong H., Rodgers J. C. ., Industry Canada, (1999), Room airflow studies using sonic anemometry.
(17-10-05)
- Huang, J. M., Chen, Q., Ribot, B., Rivoalen, H., (2004), Modelling contaminant exposure in a single-family house.
(17-10-05)
- Padfield, T., (1999), Humidity buffering of interior spaces by porous,absorbent insulation, part of hygrothermal properties of alternative insulation materials.
(14-10-05)
- Hukseflux Thermal Sensors, (1999), Application and specification of heat flux sensors [Online].
(14-10-05)
- Militzer, J. and Bell, T. A., (2001), CFDnet: Recent Developments and Future Work.
(14-10-05)
- Riethmuller, O. A. M. M. L. and Silva, M. C. G., (2002), Flowfield characterisation in the wake of a low-velocity heated sphere anemometer.
(14-10-05)
- Nahora, H. B., Hoanga, M. L., Verbovena, P., Baelmansb, M. and Nicola?ˇ§a, B. M., (2005), CFD model of the airflow, heat and mass transfer in cool stores.
(13-10-05)
- Tsai, W., Chen, H. and Liao, T., (2005), An ultrasonic air temperature measurement system with self-correction function for humidity.
(12-10-05)
- Melikov, A. and Popiolek, Z., (2004), Comparison of different methods for the determination of dynamic characteristics of low velocity thermal anemometers.
(12-10-05)
- Melikov, A., Popiolek, Z., Finkelstein, W., Sefker, T., Care, I., (1998), Requirements and guidelines for low velocity measurements.
(12-10-05)
- Melikov, R.K., (1998), Recent european research on low-velocity measurements.
(12-10-05)
- Jensen, K. D., (2004), Flow Measurements.
(12-10-05)
- Emmerich, S. J., Persily, A. K. and Nabinger, S. J., (2002), Modeling moisture in residential buildings with a multizone IAQ program.
(11-10-05)
- Yontz, R. R., (2003), An overview of indoor air quality.
(6-10-05)
- Connell, C. P., (), Health Effects of Moulds (Molds): State of Knowledge.
(6-10-05)
- Wonder Makers Environmental Inc, (2004), Give me a number! post-remediation criteria for mold cleanup.
(6-10-05)
- Zhao, L., Zhang, Y., Wang, X. and Christianson, G. L. L. L., (1999), Measurement of airflow patterns in ventilated spaces using particle image velocimetry.
(4-10-05)
- Boelter, L. M. K., Gordon, H. S. and Griffin, J. R., (1946), Free evaporation into air of water from a free horizontal quiet surface.
(4-10-05)
- Goldstein, J., et al., (2005), Heat transfer - a review of 2002 literature.
(4-10-05)
- Loomans, M., (1998), The measurement and simulation of indoor air flow.
(4-10-05)
- Melikova, A. K., Kr¨ągerb, U., Zhoua, G., Madsenc, T. L. and Langkildea , G., (1997), Air temperature fluctuations in rooms.
(4-10-05)
- J?rgensen, F., Melikov, A. K., Popiolek, Z., Silva, M. C. G., (2004), Total uncertainty of low velocity thermal anemometers for measurement of indoor air movements.
(4-10-05)
Essay
- Journal: International Journal of Ventilation: 28-10-05
- Journal: Journal of Building Physics: 26-10-05
- Energy System for the Next Millenium: GEOTHERMAL HEATING & COOLING - WHAT IT IS AND HOW IT WORKS: 19-10-05
- CanREN-Canadian Renewable Energy Network: 19-10-05
- ATLAS web site: 19-10-05
- Building Technology-ATLAS: 19-10-05
- WSEC publications on WSU Energy Program: 18-10-05
- BSRIA: 17-10-05
- standards: CGSB Canadian General Standards Board: 14-10-05
- Indoor Fungal Concentrations: 6-10-05
- Useful Terms for air flow: 4-10-05
- Licensing Digital Information: 4-10-05
Web Links
- MEK publications
-
- CoolingZone.com
- "CoolingZone's Online Magazine is a web-based monthly publication providing technical articles and news to the professionals involved in all aspects of cooling and thermal management in commercial and industrial applications"
Concept
- mathematics: numerical method: 27-10-05
- measurement: anemometer, low air velocity in room: 14-10-05
- Indoor air movement-CFD: 14-10-05
- measurement: heat flux: 14-10-05
| |