|
- Added references: 30
- Added concepts: 0
- Added essays: 0
References
- Zhai, Z., (2006), Application of computational fluid dynamics in building design: aspects and trends.
(21-12-06)
- Wakili, K. G. and Frank,, (2004), A humidity dependent vapour retarder in non-ventilated flat roofs. in situ measurements and numerical analysis.
(21-12-06)
- Guana, L., Yang, J. and Bell, J. M., (2007), Cross-correlations between weather variables in Australia.
(21-12-06)
- prEN 15026:2004, (2004), Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation.
(21-12-06)
- Janssen, H., Blocken, B., Roels, S., Carmeliet, J., (2007), Wind-driven rain as a boundary condition for HAM simulations: Analysis of simplified modelling approaches.
(21-12-06)
- Moon, H.J., (2005), Assessing mold risks in buildings under uncertainty.
(6-12-06)
- Toole, T. M., (1998), Uncertainty and home builders' adoption of technological innovations.
(4-12-06)
- Bossink, B. A. G., (2004), Managing Drivers of Innovation in Construction Networks.
(4-12-06)
- Goverse, T., M. P. H., Groenewegen, P., Worrell, E. and Smits, R. E. H. M., (2001), Wood innovation in the residential construction sector; opportunities and constraints.
(4-12-06)
- Gustavsson, L., Pingoud, K., (2006), Carbon dioxide balance of wood substitution: Comparing concrete- and wood-framed buildings.
(4-12-06)
- Gustavsson, L. S., Sathre, R. S., (2006), Variability in energy and carbon dioxide balances of wood and concrete building materials.
(4-12-06)
- Buchanana,
. H. and Levineb, S. B., (2007), Wood-based building materials and atmospheric carbon emissions.
(4-12-06)
- Thormark, C., (2006), The effect of material choice on the total energy need and recycling potential of a building.
(4-12-06)
- Li, Z., (2006), A new life cycle impact assessment approach for buildings.
(4-12-06)
- Tommerup, H., Svendsen, S., (2006), Energy savings in Danish residential building stock.
(4-12-06)
- Gan, G., (2006), Simulation of buoyancy-induced flow in open cavities for natural ventilation.
(4-12-06)
- Reinhart, C., Fitz, A., (2006), Findings from a survey on the current use of daylight simulations in building design.
(4-12-06)
- Ghiaus, C., (2006), Experimental estimation of building energy performance by robust regression.
(4-12-06)
- Ruck, N. C., (2006), International Energy Agency's Solar Heating and Cooling Task 31, ¡®Daylighting Buildings in the 21st Century'.
(4-12-06)
- Evola, G., Popov, V., (2006), Computational analysis of wind driven natural ventilation in buildings.
(4-12-06)
- Wong, J., Li, H., (2006), Development of a conceptual model for the selection of intelligent building systems .
(28-11-06)
- Flor, F., Liss¨¦n, J. M. S. and Dom¨ªnguez, S.¨¢., (2006), A new methodology towards determining building performance under modified outdoor conditions.
(28-11-06)
- Posner, J. D., Buchanan, C. R. and Dunn-rankin, D., (2003), Measurement and prediction of indoor air flow in a model room.
(28-11-06)
- Zinzi,
., (2006), Office worker preferences of electrochromic windows: a pilot study.
(28-11-06)
- Fluent Inc, (1998), Fluent user's guide, Version 5.0,.
(28-11-06)
- Stamou, A., Katsiris, I., (2006), Verification of a CFD model for indoor airflow and heat transfer.
(28-11-06)
- Brown, W. and Adams, P., Tonyan, T., Ullett, J., (1997), Water management in exterior wall claddings.
(14-11-06)
- Gurevich, M. S., (2005), Water penetration through exterior walls.
(14-11-06)
- Syed, A.M., Kosny, J., (2006), Effect of framing factor on clear wall r-value for wood and steel framed walls.
(7-11-06)
- Karoglou, M., Moropoulou, A., Krokida, M. K. and Maroulis, Z. B., (2007), A powerful simulator for moisture transfer in buildings .
(7-11-06)
Essay
- No Entered.
Web Links
No new entry.
Concept
- No Entered.
| |