Home Research Books Journals Conferences Grants Professional Awards Experience Students Coursework


2019 |2018 | 2017 |2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 &  Earlier


Refereed Journal Publications
 
2022
 

 
2021
 

  1. H. Badihi, Y. Zhang, P. Pillay, S. Rakheja (2021). Fault-Tolerant Individual Pitch Control for Load Mitigation in Wind Turbines with Actuator Faults. IEEE Transactions on Industrial Electronics. 68(1): 532-543.

  2. Y. Liu, M. A. Masadeh, P. Pillay (2021). Power Hardware-in-the-Loop Based Emulation of a Self-Excited Induction Generator Under Unbalanced Conditions. IEEE Transactions on Industry Applications.

  3. G. Tanuku, P. Pillay (2021). Emulation of an Induction Machine for Unbalanced Grid Faults. IEEE Transactions on Industry Applications. 57(5): 4625-4635.
2020
 

  1. K. S. Amitkumar (*), P. Pillay and J. Bélanger. (2020). An Investigation of Power-Hardware-in-the- Loop-Based Electric Machine Emulation for Driving Inverter Open-circuit Faults. IEEE Transactions on Transportation Electrification. 7(1): 170-182.

  2. R. Thike, P. Pillay (2020). Mathematical Model of an Interior PMSM Aligned Magnet and Reluctance Torques. IEEE Transactions on Transportation Electrification. 6(2): 647-658.

  3. B. Basnet, A. M. Aljehaimi and P. Pillay. (2020). Back EMF Analysis of a Variable Flux Machine for Different Magnetization States. IEEE Transactions on Industrial Electronics.

  4. T. Payarou, P. Pillay, M. Packirisamy, S. Rahimi and K. Kuruvinashetti,. (2020). Detailed Electrochemical Model of Micro Photosynthetic Power Cells. IEEE Transactions on Industry Applications. 57(2): 1703-1714.

  5. D. Barman, P. Pillay (2020). Effect of Skewing in a Variable Flux Interior Permanent Magnet Synchronous Machine. IEEE Transactions on Industry Applications. 56(6): 6399-6410.
2019
 

  1. R. Thike, P. Pillay (2019). Automated Current Control Method for Flux Linkage Measurement of Synchronous Reluctance Machines. IEEE Transactions on Industry Applications. 56(2): 1464-1474.

  2. A. Choudhury, P. Pillay (2019). Space Vector Based Capacitor Voltage Balancing for a Three-Level NPC Driven Traction Inverter Drive. IEEE Journal of Emerging and Selected Topics in Power Electronics. 8(2): 1276-1286.

  3. M. Al-Badri, P. Pillay, P. Angers (2019). Induction Machine Rapid Performance Tests. IEEE Transactions on Industry Applications. 55(5): 4685-4691.

  4. H. Badihi, S. Jadidi, Y. Zhang, P. Pillay, S. Rakheja (2019). Fault-Tolerant Cooperative Control in a WindFarm Using Adaptive Control Reconfiguration and Control Reallocation. IEEE Transactions on Sustainable Energy. 11(4): 2119-2129.

  5. S. S. Maroufian and P. Pillay, "Design and Analysis of a Novel PM-Assisted Synchronous Reluctance Machine Topology With AlNiCo Magnets," in IEEE Transactions on Industry Applications, vol. 55, no. 5, pp. 4733-4742, Sept.-Oct. 2019.
    doi: 10.1109/TIA.2019.2925784

  6. K. S. Amitkumar, R. Thike and P. Pillay, "Linear Amplifier-Based Power-Hardware-in-the-Loop Emulation of a Variable Flux Machine," in IEEE Transactions on Industry Applications, vol. 55, no. 5, pp. 4624-4632, Sept.-Oct. 2019.
    doi: 10.1109/TIA.2019.2921286

  7. C. Desai and P. Pillay, "Back EMF, Torque–Angle, and Core Loss Characterization of a Variable-Flux Permanent-Magnet Machine," in IEEE Transactions on Transportation Electrification, vol. 5, no. 2, pp. 371-384, June 2019.
    doi: 10.1109/TTE.2019.2899740.

  8. M. G. Bijan and P. Pillay, "Efficiency Estimation of the Induction Machine by Particle Swarm Optimization Using Rapid Test Data With Range Constraints," in IEEE Transactions on Industrial Electronics, vol. 66, no. 8, pp. 5883-5894, Aug. 2019.
    doi: 10.1109/TIE.2018.2873121.

  9. H. K. Tanneru, K. Kuruvinashetti, P. Pillay, R. Rengaswamy and M. Packirisamy, “Perspective-Micro photosynthetic power cells,” in Journal of The Electrochemical Society, volume 166, issue 9, B3012-B3016, 2019.
    doi: 10.1149/2.0031909jes.
2018
 

  1. A. Takbash, M. Ibrahim, L. Masisi and P. Pillay, "Core Loss Calculation in a Variable Flux Permanent Magnet Machine for Electrified Transportation," in IEEE Transactions on Transportation Electrification, vol. 4, no. 4, pp. 857-866, Dec. 2018.
    doi: 10.1109/TTE.2018.2867292.

  2. A. M. Aljehaimi and P. Pillay, "Braking a Variable Flux-Intensifying IPMSM in Minimal Time," in IEEE Transactions on Transportation Electrification, vol. 4, no. 4, pp. 867-876, Dec. 2018.
    doi: 10.1109/TTE.2018.2865908.

  3. K. S. Amitkumar, R. S. Kaarthik and P. Pillay, "A Versatile Power-Hardware-in-the-Loop-Based Emulator for Rapid Testing of Transportation Electric Drives," in IEEE Transactions on Transportation Electrification, vol. 4, no. 4, pp. 901-911, Dec. 2018.
    doi: 10.1109/TTE.2018.2857216.

  4. S. S. J. C. Akiror, R. S. Kaarthik, J. Wanjiku, P. Pillay and A. Merkhouf, "Closed-Loop Control for a Rotational Core Loss Tester," in IEEE Transactions on Industry Applications, vol. 54, no. 6, pp. 5888-5896, Nov.-Dec. 2018.
    doi: 10.1109/TIA.2018.2854270.

  5. M. Ibrahim and P. Pillay, "The Loss of Self-Excitation Capability in Stand-Alone Synchronous Reluctance Generators," in IEEE Transactions on Industry Applications, vol. 54, no. 6, pp. 6290-6298, Nov.-Dec. 2018.
    doi: 10.1109/TIA.2018.2849407.

  6. A. Takbash and P. Pillay, "Magnetization and Demagnetization Energy Estimation and Torque Characterization of a Variable-Flux Machine," in IEEE Transactions on Energy Conversion, vol. 33, no. 4, pp. 1837-1845, Dec. 2018.
    doi: 10.1109/TEC.2018.2837893.

  7. M. Al-Badri, P. Pillay and P. Angers, "Simple and Accurate Algorithm for Small- and Medium-Sized Three-Phase IM Efficiency Estimation Based on No-Load Tests," in IEEE Transactions on Industry Applications, vol. 54, no. 6, pp. 5812-5821, Nov.-Dec. 2018.
    doi: 10.1109/TIA.2018.2851582.

  8. J. C. Akiror, J. Wanjiku, P. Pillay, J. Cave and A. Merkhouf, "Rotational Core Loss Magnetizer: Design and Measurements," in IEEE Transactions on Industry Applications, vol. 54, no. 5, pp. 4355-4364, Sept.-Oct. 2018.
    doi: 10.1109/TIA.2018.2844844.

  9. C. Desai, H. R. Mehta and P. Pillay, "Fabrication and Assembly Method for Synchronous Reluctance Machines," in IEEE Transactions on Industry Applications, vol. 54, no. 5, pp. 4227-4235, Sept.-Oct. 2018.
    doi: 10.1109/TIA.2018.2836975.

  10. M. G. Bijan, M. Al-Badri, P. Pillay and P. Angers, "Induction Machine Parameter Range Constraints in Genetic Algorithm Based Efficiency Estimation Techniques," in IEEE Transactions on Industry Applications, vol. 54, no. 5, pp. 4186-4197, Sept.-Oct. 2018.
    doi: 10.1109/TIA.2018.2836344.

  11. A. M. Aljehaimi and P. Pillay, "Operating Envelopes of the Variable-Flux Machine With Positive Reluctance Torque," in IEEE Transactions on Transportation Electrification, vol. 4, no. 3, pp. 707-719, Sept. 2018.
    doi: 10.1109/TTE.2018.2828385.

  12. Ted Stathopoulos, Hatem Alrawashdeh, Ayman Al-Quraan, Bert Blocken, Aierken Dilimulati, Marius Paraschivoiu, Pragasen Pilay, "Urban wind energy: Some views on potential and challenges," Journal of Wind Engineering and Industrial Aerodynamics, Volume 179, 2018, Pages 146-157.
    doi.org/10.1016/j.jweia.2018.05.018.

  13. M. Ashourianjozdani, L. A. C. Lopes and P. Pillay, "Power Electronic Converter Based PMSG Emulator: A Testbed for Renewable Energy Experiments," in IEEE Transactions on Industry Applications, vol. 54, no. 4, pp. 3626-3636, July-Aug. 2018.
    doi: 10.1109/TIA.2018.2819618.

  14. R. Thike and P. Pillay, "Characterization of a Variable Flux Machine for Transportation Using a Vector-Controlled Drive," in IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 494-505, June 2018.
    doi: 10.1109/TTE.2017.2788200.

  15. R. S. Kaarthik, K. S. Amitkumar and P. Pillay, "Emulation of a Permanent-Magnet Synchronous Generator in Real-Time Using Power Hardware-in-the-Loop," in IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 474-482, June 2018.
    doi: 10.1109/TTE.2017.2778149.

  16. A. Takbash, M. Ibrahim and P. Pillay, "Design Optimization of a Spoke-Type Variable Flux Motor Using AlNiCo for Electrified Transportation," in IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 536-547, June 2018.
    doi: 10.1109/TTE.2018.2817120.

  17. S. S. Maroufian and P. Pillay, "Torque Characterization of a Synchronous Reluctance Machine Using an Analytical Model," in IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 506-516, June 2018.
    doi: 10.1109/TTE.2018.2794828.

  18. M. A. Masadeh, K. S. Amitkumar and P. Pillay, "Power Electronic Converter-Based Induction Motor Emulator Including Main and Leakage Flux Saturation," in IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 483-493, June 2018.
    doi: 10.1109/TTE.2018.2824619.

  19. A. M. Aljehaimi and P. Pillay, "Novel Flux Linkage Estimation Algorithm for a Variable Flux PMSM," in IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2319-2335, May-June 2018.
    doi: 10.1109/TIA.2018.2794338.

  20. S. S. Maroufian and P. Pillay, "Self-Excitation Criteria of the Synchronous Reluctance Generator in Stand-Alone Mode of Operation," in IEEE Transactions on Industry Applications, vol. 54, no. 2, pp. 1245-1253, March-April 2018.
    doi: 10.1109/TIA.2017.2764847.

  21. J. C. Akiror, P. Pillay and A. Merkhouf, "Challenges in Modeling of Large Synchronous Machines," in IEEE Transactions on Industry Applications, vol. 54, no. 2, pp. 1652-1662, March-April 2018.
    doi: 10.1109/TIA.2017.2772893.
2017

 

  1. R. S. Kaarthik, J. Maisonneuve and P. Pillay, "Real-Time Emulation of a Pressure-Retarded Osmotic Power Generation System," in IEEE Transactions on Industry Applications, vol. 53, no. 6, pp. 5768-5776, Nov.-Dec. 2017.

  2. M. Al-Badri, P. Pillay and P. Angers, "A Novel In Situ Efficiency Estimation Algorithm for Three-Phase Induction Motors Operating With Distorted Unbalanced Voltages," in IEEE Transactions on Industry Applications, vol. 53, no. 6, pp. 5338-5347, Nov.-Dec. 2017.

  3. Badihi, Hamed; Zhang, Youmin; Pillay, Pragasen; Rakheja, Subhash:"Application of FMRAC to fault-tolerant cooperative control of a wind farm with decreased power generation due to blade erosion/debris buildup" International Journal of Adaptive Control and Signal Processing, pp.1099-1115, Nov. 2017.

  4. M. A. Masadeh, K. Kuruvinashetti, M. Shahparnia, P. Pillay and M. Packirisamy, "Electrochemical Modeling and Equivalent Circuit Representation of a Microphotosynthetic Power Cell," in IEEE Transactions on Industrial Electronics, vol. 64, no. 2, pp. 1561-1571, Feb. 2017.

  5. M. Al-Badri, P. Pillay and P. Angers, "Induction Machine Rapid Performance Test," in IEEE Transactions on Industry Applications, vol. 55, no. 5, pp. 4685-4691, Sept.-Oct. 2019.
    doi: 10.1109/TIA.2019.2924409
2016


  1. J. C. Akiror, P. Pillay and A. Merkhouf, "Effect of Saturation on Rotational Flux Distribution in Hydro Generators," in IEEE Transactions on Energy Conversion, vol. 31, no. 4, pp. 1657-1664, Dec. 2016.

  2. A. Choudhury, P. Pillay and S. S. Williamson, "DC-Bus Voltage Balancing Algorithm for Three-Level Neutral-Point-Clamped (NPC) Traction Inverter Drive With Modified Virtual Space Vector," in IEEE Transactions on Industry Applications, vol. 52, no. 5, pp. 3958-3967, Sept.-Oct. 2016.

  3. S. Taghavi and P. Pillay, "A Novel Grain-Oriented Lamination Rotor Core Assembly for a Synchronous Reluctance Traction Motor With a Reduced Torque Ripple Algorithm," in IEEE Transactions on Industry Applications, vol. 52, no. 5, pp. 3729-3738, Sept.-Oct. 2016.

  4. L. Masisi, M. Ibrahim, J. Wanjiku, A. M. Aljehaimi and P. Pillay, "The Effect of Two- and Three-Level Inverters on the Core Loss of a Synchronous Reluctance Machine (SynRM)," in IEEE Transactions on Industry Applications, vol. 52, no. 5, pp. 3805-3813, Sept.-Oct. 2016.

  5. P. Pillay, M. Al-Badri, P. Angers and C. Desai, "A New Stray-Load Loss Formula for Small and Medium-Sized Induction Motors," in IEEE Transactions on Energy Conversion, vol. 31, no. 3, pp. 1221-1227, Sept. 2016.

  6. A. Choudhury, P. Pillay and S. Williamson, “A Performance Comparison Study of Space-Vector and Modified Carrier-Based PWM Techniques for a 3-Level Neutral-Point-Clamped (NPC) Traction Inverter Drive,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol 4, no. 3, pp. 1064-1076, Sept. 2016.

  7.  J. Wanjiku, and P. Pillay, “Design of a Sinusoidally Wound 2-D Rotational Core Loss Setup With the Consideration of Sensor Sizing,” IEEE Transactions on Industry Applications, vol. 52, no. 4, pp. 3022-3032, July-Aug. 2016.

  8. N. Alatawneh, and P. Pillay, “Calibration of the Tangential Coil Sensor for the Measurement of Core Losses in Electrical Machine Laminations,” IEEE Transactions on Energy Conversion , vol. 31, no. 2, pp. 413–423, June 2016.

  9.  J. Wanjiku, and P. Pillay, “Shielding of the z-Component of the Magnetic Field in a 2-D Magnetizer with Deep Yoke,” IEEE Transactions on Industry Applications , vol. 52, no. 3, pp. 2289-2296, May/June 2016.

  10. L. Masisi; and P. Pillay, “A Modulation Strategy for a Three-Level Inverter Synchronous Reluctance Motor (SynRM) Drive,” IEEE Transactions on Industry Applications, vol. 52, no.2, pp. 1874-1881, March/April 2016.

  11. M. Al-Badri, P. Pillay, and P. Angers, "A Novel Technique for In Situ Efficiency Estimation of Three-Phase IM Operating With Unbalanced Voltages," IEEE Transactions on Industry Applications, vol. 52, no. 4, pp. 2843-2855, July-Aug. 2016.

  12. A. Choudhury, P. Pillay, and S. S. Williamson, "Discontinuous Hybrid-PWM-Based DC-Link Voltage Balancing Algorithm for a Three-Level Neutral-Point-Clamped (NPC) Traction Inverter Drive," IEEE Transactions on Industry Applications, vol. 52, no. 4, pp. 3071-3082, July-Aug. 2016.

  13.  J. Maisonneuve, C. B. Laflamme, and P. Pillay, “Experimental Investigation of Pressure Retarded Osmosis for Renewable Energy Conversion: Towards Increased Net Power,” Elsevier Journal of Applied Energy, vol. 164, pp. 425-435, Feb. 2016.

  14. A. Choudhury, P. Pillay, and S. S. Williamson, “Modified DC-bus Voltage Balancing Algorithm Based Three-Level Neutral Point Clamped IPMSM Drive for Electric Vehicle Applications,” IEEE Transactions on Industrial Electronics, vol. 63, no. 2, pp. 761-772, Feb. 2016.

  15. A. Choudhury, P. Pillay, and S. S. Williamson, “Modified DC-bus Voltage Balancing Algorithm for a 3-Level Neutral Point Clamped (NPC) PMSM Inverter Drive with Reduced Common-Mode Voltage,” IEEE Transactions on Industry Applications, vol.52, no.1, pp. 278-292, Jan./Feb. 2016.

  16. N. Alatawneh, and P. Pillay, “Modeling of the Interleaved Hysteresis Loop in the Measurements of Rotational Core Losses,” Elsevier Journal of Magnetism and Magnetic Materials, vol. 397, pp. 157–163, Jan. 2016.
2015


  1. J. Akiror, A. Merkouf, C. Hudon, and P.Pillay, “Consideration of Design and Operation on Rotational Flux Density Distributions in Hydro Generator Stators,” IEEE Transactions on Energy Conversion, vol.30, no.4 pp. 1585-1594, Dec. 2015.

  2. J. Wanjiku, M.A. Khan, P. Barende, and P. Pillay, “Influence of Slot Openings and Tooth Profile on Cogging Torque in Axial-Flux PM Machines,” IEEE Transactions on Industrial Electronics, vol. 62, no. 12, pp. 7578-7589, Dec. 2015.

  3. M. Ibrahim and P. Pillay, “Hysteresis Dependent Model for the Brushless Exciter of Synchronous Generators,” IEEE Transactions on Energy Conversion, vol.30, no.4, pp.1321-1328, Dec.2015.

  4. L. Masisi, P. Pillay, and S. Williamson, "A Three Level Neutral Point Clamped Inverter Synchronous Reluctance Machine Drive," IEEE Transactions on Industrial Applications, vol.51, no.6, pp. 4531-4540, Nov./Dec. 2015.

  5. M. Ibrahim, L. Masisi, and P. Pillay, "Design of Variable Flux Permanent Magnet Machine Using Alnico Magnets," IEEE Transactions on Industry Applications, vol.51, no.6, pp. 4482-4491, Nov./Dec. 2015.

  6. S. Taghavi and P. Pillay, “A Mechanically Robust Rotor with Transverse Laminations for a Wide Speed Range Synchronous Reluctance Traction Motor,” IEEE Transactions on Industry Applications, vol.51, no.6, pp.4404-4414, Nov./Dec. 2015.

  7. N. Curry and P. Pillay, “Integrating Solar Energy into an Urban Small-Scale Anaerobic Digester for Improved” Elsevier Journal of Renewable Energy, vol.83, pp. 280-293, Nov. 2015.

  8.  J. Wanjiku and P. Pillay, “Design Considerations of 2-D Magnetizers for High Flux Density Measurements,” IEEE Transactions on Industry Applications, vol.51, no.5, pp. 3629-3638, Sept./Oct. 2015.

  9. M. Ibrahim, L. Masisi and P. Pillay, "Design of Variable Flux Permanent Magnet Machine for Reduced Inverter Rating," IEEE Transactions on Industry Applications,vol.51, no.5, pp.3666-3674, Sept./Oct. 2015.

  10. J. Maisonneuve, Pragasen Pillay, and C. B. Laflamme, “Osmotic power potential in remote regions of Quebec,” Elsevier Journal of Renewable Energy, vol. 81, pp. 62–70, Sep. 2015.

  11. A. Choudhury, P. Pillay, and S. S. Williamson, “A hybrid-PWM based DC-link voltage balancing algorithm for a 3-level neutral-point-clamped (NPC) DC/AC traction inverter drive,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol.3, no.3, pp. 805-816, Set. 2015.

  12. M. Al-Badri, P. Pillay and P. Angers, “A Novel In-Situ Efficiency Estimation Algorithm for Three-Phase IM Using GA, IEEE Method F1 Calculations and Pre-Tested Motor Data,” IEEE Transactions on Energy Conversion, vol.30, no.3, pp. 1092-1102, Sept. 2015.

  13. C. de Beer, P. S. Barendse, and P. Pillay, “Fuel Cell Condition Monitoring Using Optimized Broadband Impedance Spectroscopy,” IEEE Transactions on Industrial Electronics, vol. 62, no. 8, pp. 5308-5316, Aug. 2015.

  14. C. de Beer, P. S. Barendse, P. Pillay, B. Bullecks, and R. Rengaswamy, “Classification of High-Temperature PEM Fuel Cell Degradation Mechanisms Using Equivalent Circuits,” IEEE Transactions on Industrial Electronics, vol. 62, no. 8, pp. 5265-5274, Aug. 2015.

  15. C. de Beer, P. S. Barendse, P. Pillay, B. Bullecks, and R. Rengaswamy, “Online Diagnostics of HTPEM Fuel Cells Using Small Amplitude Transient Analysis for CO Poisoning,” IEEE Transactions on Industrial Electronics, vol. 62, no. 8, pp. 5175-5186, Aug. 2015.

  16. M. Al-Badri, P. Pillay and P. Angers, “A Novel Algorithm for Estimating Refurbished Three-Phase Induction Motors Efficiency Using Only No-Load Tests,” IEEE Transactions on Energy Conversion, vol.30, no.2, pp. 615-625, June 2015.

  17. M. F. Naguib, J. Maisonneuve, C. B. Laflamme, and Pragasen Pillay, “Modeling pressure-retarded osmotic power in commercial length membranes,” Elsevier Journal of Renewable Energy, vol. 76, pp. 619-627, April 2015.

  18. J. Maisonneuve, Pragasen Pillay, and C. B. Laflamme, "Pressure-retarded osmotic power system model considering non-ideal effects,” Elsevier Journal of Renewable Energy, vol. 75, pp. 416–424, March 2015.

  19. N. Alatawneh and P.Pillay, "The Negative Value of Power in Rotational Core Loss Measurements,” IEEE Transactions on Energy Conversion, vol.30, no.1, pp. 410-412, March 2015.

  20. C. de Beer, P. Barendse, P. Pillay, R. Rengaswamy, and B. Bullecks, "Electrical Circuit Analysis of CO Poisoning in High-Temperature PEM Fuel Cells for Fault Diagnostics and Mitigation,” IEEE Transactions on Industry Applications, vol. 51, no. 1, pp. 619-630, Jan.-Feb. 2015.
2014

  1. A. Chodhury, P. Pillay, and S.S. Williamson, "Comparative Analysis Between Two-Level and Three-Level DC/AC Electric Vehicle Traction Inverters Using a Novel DC-Link Voltage Balancing Algorithm," IEEE Transactions of Journal of Emerging and Selected Topics in Power Electronics, vol.2, no.3, pp. 529-540, Sept. 2014.

  2. O. De Meyer, R. Okou, A.B. Sebitosi, and P. Pillay, "Practical Considerations for Low Pressure Solar Water Heaters in South Africa," Journal of Energy in Southern Africa, vol. 25, no. 3, pp. 36-45, Aug. 2014. 

  3. M. Ibrahim and P. Pillay, "A Hybrid Model for Improved Hysteresis Loss Prediction in Electrical Machines," IEEE Transactions on Industry Applications, vol. 50, no. 4, pp. 2503-2511, July-Aug. 2014.

  4. A. Alatawneh and P. Pillay, "The Minor Hysteresis Loop under Rotating Magnetic Fields in Machine Laminations," IEEE Transactions on Industry Applications, vol. 50, no. 4, pp. 2544-2553, July-Aug. 2014.

  5. S. Taghavi and P. Pillay, "A Sizing Methodology of the Synchronous Reluctance Motor for Traction Applications," IEEE Transactions of Emerging and Selected Topics in Power Electronics, vol.2, no.2, pp. 329-340, June 2014. 

  6. A. Chodhury, P. Pillay, and S.S. Williamson, "DC-link Voltage Balancing for a 3-Level Electric Vehicle Traction Inverter using an Innovative Switching Sequence Control Scheme," IEEE Transactions of Journal of Emerging and Selected Topics in Power Electronics, , vol.2, no.2, pp. 296-307, June 2014. 

  7. O.D. Mipoung, L.A.C Lopes, and P. Pillay, "Potential of Type-1 Wind Turbines for Assisting with Frequency Support in Storage-Less Diesel HybridMini-Grids," IEEE Transaction on Industrial Electronics, vol.61, no.5, pp.2297-2306, May 2014. 

  8. O.D. Mipoung, L.A.C Lopes, and P. Pillay, "Frequency Support from a Fixed-Pitch Type-2 WindTurbine in a Diesel Hybrid Mini-Grid," IEEE Transactions on Sustainable Energy, vol.5, no.1, pp. 110-118, Jan. 2014. 
2013
 

  1. M. Ibrahim and P. Pillay, "Core Loss Prediction in Electrical Machine Laminations Considering Skin Effect and Minor Hysteresis Loops," IEEE Transactions on Industry Applications, vol. 49, no.5, pp.2061- 2068, Sept.-Oct. 2013.

  2. A.G. Siraki, P. Pillay, and P. Angers, "Full Load Efficiency Estimation of Refurbished Induction Machines From No-Load Testing," IEEE Transactions on Energy Conversion, vol. 28, no.2, pp. 317-326, June 2013.

  3. R. Namuli, B. Jaumard, A. Awasti and P. Pillay, "Optimisation of Biomass Waste to Energy Conversion Systems for Rural Grid-connected Applications," Elsevier Journal of Applied Energy, vol. 102, pp.1013-1021, Feb. 2013.
2012
 

  1.  A. G. Siraki, C. Gajjar, M. A Khan, P. S. Barendse, and P. Pillay, "An Algorithm for Nonintrusive in Situ Efficiency Estimation of Induction Machines Operating with Unbalanced Supply Conditions," IEEE Transactions on Industry Applications, vol. 48, no.6, pp.1890-1900, Nov.-Dec. 2012.

  2. A. G. Siraki and P. Pillay, "Comparison of Two Methods for Full-Load in Situ Induction Motor Efficiency Estimation from Field Testing in the Presence of Over/Undervoltages and Unbalanced Supplies," IEEE Transactions on Industry Applications, vol. 48, no.6, pp.1911-1921, Nov.-Dec. 2012.

  3. M. Ibrahim and P. Pillay, "Advanced Testing and Modeling of Magnetic Materials Including a New Method of Core Loss Separation for Electrical Machines," IEEE Transactions on Industry Applications, vol. 48, no.5, pp.1507-1515, Sept.-Oct. 2012.

  4. N. Alatawneh and P. Pillay, "Design of a Novel Test Fixture to Measure Rotational Core Losses in Machine Laminations," IEEE Transactions on Industry Applications, vol. 48, no.5, pp.1467-1477, Sept.-Oct. 2012.

  5. R. Okou, AB Sebitosi and P. Pillay, "A Specification of a Flywheel Battery for a Rural South African Village," Journal of Energy in Southern Africa, vol. 23, no. 3, pp. 52-63, Aug. 2012.

  6. A. G. Siraki and P. Pillay, "Study of Optimum Tilt Angles for Solar Panels in Different Latitudes for Urban Applications," Elsevier Journal of Solar Energy, vol. 86, no.6, pp.1920-1928, June 2012.

  7. N. Curry and P. Pillay, "Biogas Prediction and Design of a Food Waste to Energy System for the Urban Environment," Elsevier Journal of Renewable Energy, vol. 41, pp. 200-209, May 2012.

  8. N. Alatawneh and P. Pillay, "Rotational Core Loss and Permeability Measurements in Machine Laminations with Reference to Permeability Asymmetry," IEEE Transactions on Magnetics, vol. 48, no.4, pp. 1445-1448, April 2012.

  9. Y. Zhang, P. Pillay, M. Ibrahim and M-C. Chen, "Magnetic Characteristics and Core Losses in Machine Laminations: High-Frequency Loss Prediction from Low-Frequency Measurements," IEEE Transactions on Industry Applications, vol. 48, no.2, pp. 623-629, March - April 2012.

  10. A.G. Siraki and P. Pillay, "An In-situ Efficiency Estimation Technique for Induction Machines Working with Unbalanced Supplies," IEEE Transactions on Energy Conversion, vol. 27, no.1, pp. 85-95, March 2012.

  11. N. Alatawneh and P.Pillay, "Test Specimen Shape Considerations for the Measurement of Rotational Core Losses," IEEE Transactions on Energy Conversion, vol. 27, no.1, pp. 151-159, March 2012.
2011

  1.  R. Namuli, C. Laflamme, and P. Pillay, "A Computer Program for the Conversion of Organic Waste to Energy," MDPI Journal of Energies, vol.  4, no. 11, pp. 1973-2001, Nov.2011.

  2.  R.Okou, A. B.Sebitosi and P.Pillay," Flywheel Rotor Manufacture for Rural Energy Storage in sub-Saharan Africa Energy," Elsevier Journal of Energy, vol. 36, no. 10, pp. 6138–6145, Oct. 2011.

  3. H. Li and P.Pillay, "A Methodology to Design Linear Generators for Energy Conversion of Ambient Vibrations," IEEE Transactions on Industry Applications, vol. 47, no. 6, pp. 2445-2452, Nov.-Dec. 2011.

  4. R.Okou, A. B.Sebitosi, M. A. Khan, P. S. Barendse, and P.Pillay, "Design and Analysis of an Electromechanical Battery for Rural Electrification in Sub-Saharan Africa," IEEE Transactions on Energy Conversion, vol. 26, no. 4, pp. 1198-1209, Dec. 2011.

  5. Y. Zhang, M.C. Cheng, and P.Pillay, "A Novel Hysteresis Core Loss Model for Magnetic Laminations," IEEE Transactions on Energy Conversion, vol. 26, no. 4, pp. 993-999, Dec. 2011.

  6. F. Endrejat and P. Pillay, "Ride-Through of Medium Voltage Synchronous Machine Centrifugal Compressor Drives," IEEE Transactions on Industry Applications, vol.47, no.4, pp. 1567-1577, July-Aug. 2011.

Back To Top
2009

  1. E.Sazonov, H Li, D. Curry, and P. Pillay, "Self-Powered Sensors for Monitoring of Highway Bridges", IEEE Sensors Journal, vol. 9, pp.1422 – 1429, Nov. 2009.

  2. Y. Zhang, M.C. Cheng, P. Pillay, and B. Helenbrook, "High Order Finite Element Model for Core Loss Assessment in a Hysteresis Magnetic Lamination," Journal of Applied Physics, vol. 106 , no. 4, pp. 043911 - 043911-7, Nov. 2009.

  3. F. Endrejat and P. Pillay, "Resonance Overvoltages in Medium-Voltage Multilevel Drive Systems," IEEE Transactions on Industry Applications, vol. 45,  no. 4,  pp.1199 – 1209, July-Aug. 2009.

  4. R. Okou, A. B. Sebitosi, M. A. Khan, and P. Pillay, "The Potential Impact of Small Scale Flywheel Energy Storage Technology on Uganda's Energy Sector,"  Journal of Energy in South Africa, vol.20, no.1, pp. 14-19, Feb. 2009.

  5. A. Gebregergis, P. Pillay, D. Bhattacharyya, and R. Rengaswamy, "Solid Oxide Fuel Cell Modeling", IEEE Transactions on Industrial Electronics, vol. 56,  no. 1, pp: 139 – 148, Jan. 2009.

Back To Top
2008

  1. A. B. Sebitosi and P. Pillay, "Renewable Energy and the Environment in South Africa: A way forward," Elsevier Journal of Energy Policy, vol. 36, no. 9, pp. 3312-3316, Sep. 2008.

  2. A. B. Sebitosi and P. Pillay, "Grappling with a half-hearted policy: The Case of Renewable Energy and the Environment in South Africa," Elsevier Journal of Energy Policy, vol. 36, no.7, pp. 2513-2516, July 2008.

  3. F. Endrejat and P. Pillay, "The Soft Starters: Adjustable Speed Systems for Multiple MW Rated Motors," IEEE Industry Applications Magazine, vol. 14, no. 6, pp.27 - 37, Nov. – Dec. 2008

Back To Top
2007

  1. L. Dosiek and P. Pillay, "Cogging Torque Reduction in Permanent Magnet Machines", IEEE Transactions on Industry Applications, vol. 43, no. 6, Nov-Dec 2007, pp. 1565-1571.

  2. A. B. Sebitosi and P.Pillay, "New Technologies for Rural Lighting in Developing Countries: White LEDs," IEEE Transactions on Energy Conversion, vol. 22, no. 3, pp. 674 - 679, Sept. 2007.

  3. L. Mthombeni, P. Pillay, and R.Strnat, "A New Epstein Frame for Lamination Core Loss Measurements at High Frequencies and Flux Densities," IEEE Transactions on Energy Conversion, vol. 22, no. 3, pp. 614 - 620, Sept.2007.

  4. R. Naidoo and P.Pillay, "A New Method of Voltage Sag and Swell Detection," IEEE Transactions on Power Delivery, vol 22, No. 2, pp. 1056-1063, April 2007.

  5. A. B. Sebitosi and P. Pillay, "Modeling a Sustainability Yardstick in Modern Energization of Rural Sub-Saharan Africa," Elsevier Journal of Energy Policy, vol. 35, no.1, pp. 548-552, Jan. 2007.

Back To Top
2006

  1. P. Pillay and M. Manyage, "Loss of Life in Induction Machines Operating With Unbalance Supplies," IEEE Transactions on Energy Conversion, vol. 21, no. 4, pp. 813-822, Dec. 2006.

  2. A. B. Sebitosi, P. Pillay, and M.A.Khan, "An Approach to Rural Distribution Network Design for Sub-Saharan Africa," Elsevier Journal of Energy Conversion and Management, vol. 47, no. 9-10, pp. 1101 – 1112, June 2006.

  3. A. B. Sebitosi, P. Pillay, and M.A.Khan, "An Analysis of Off-Grid Electrical Systems in Rural Sub-Saharan Africa," Elsevier Journal of Energy Conversion and Management, vol. 47, no. 9-10, pp.1113 – 1123, June 2006.

  4. J. Faiz, B. Rezaeealam, and P.Pillay, "Adaptive Performance Improvement of Switched Reluctance Motors with Two-Phase Excitation," European Transactions on Electrical Power,  vol. 16, no. 1, pp. 1-13, Jan-Feb. 2006.

Back To Top
2005

  1. Y. Chen, P. Pillay and M. A. Khan, "PM Wind Generator Topologies," IEEE Transactions on Industry Applications, vol. 41, no. 6, pp. 1619–1626, Dec 2005.

  2. L.T. Mthombeni and P.Pillay, "Lamination Core Losses in Motors with Nonsinusoidal Excitation with Particular Reference to PWM and SRM Excitation Waveforms," IEEE Transactions  on Energy Conversion, vol. 20, no. 4, pp.836-843, Dec. 2005.

  3. A.B.Sebitosi and P.Pillay, "Energy Services in Sub-Saharan Africa: How Conducive is the Environment?," Elsevier Journal of  Energy Policy, vol. 33, no. 16, pp. 2044-2051, Nov. 2005.

  4. M. A. Khan, P. Pillay and K.D. Visser, "On Adapting a Small PM Wind Generator for a Multiblade, High Solidity Wind Turbine," IEEE Transactions on Energy Conversion, vol. 20, no. 3, pp.685 – 692, Sept. 2005.

  5. Z.Tang, P.Pillay, Y.Chen and A.Omekanda, "Prediction of Electromagnetic Forces and Vibrations in SRMs Operating at Steady State and Transient Speeds", IEEE Transactions on Industry Applications, vol. 20, no. 4, pp. 927-934, July-Aug. 2005.

  6. H.Douglas, P.Pillay and A.Ziarani, "Broken Rotor Bar Detection in Induction Machines with Transient Operating Speeds", IEEE Transactions on Energy Conversion, vol. 20,  no. 1, pp. 135 – 141, March 2005.

Back To Top
2004

  1. T.Humiston and P.Pillay, "Experimental Setup for the Measurement of Surge Propagation in Induction Machines," IEEE Transactions on Energy Conversion, vol. 19, no. 74, pp. 797-799, Dec.  2004.

  2. J.Faiz, H.Ebrahimpour and P.Pillay, "Influence of Unbalanced Voltage on the Steady State Performance of a Three Phase Squirrel Cage Induction Machine," IEEE Transactions on  Energy Conversion, vol. 19,no.4, pp. 657-662, Dec .2004.

  3. M.A. Khan and P. Pillay, "Comparison of the Performance of a Small PM Wind Generator Operated at Maximum Power and Maximum Torque," Transactions of the SAIEE, vol. 95, no. 4, pp. 248-255, Dec. 2004.

  4. J. Faiz, F. Kasebi and P. Pillay, "Design and Testing of an Integrated Electronically-Controlled-Capacitor for Integral and Fractional-Horse Power Single-Phase Induction Motor," Elsevier Journal on Energy Conversion & Management., vol. 45, no. 18-19, pp. 2989-3001, Nov. 2004.

  5. H.Douglas, P.Pillay and A.Ziarani, "A New Algorithm for Transient Motor Current Signature Analysis Using Wavelets," IEEE Transactions on Industry Applications, vol.40, no. 5, pp. 1361-1368, Sept. - Oct. 2004.

  6. L.Mthombeni and P.Pillay, "Core Losses in Motor Laminations Exposed to High Frequency or Non-Sinusoidal Excitation," IEEE Transactions on Industry Applications, vol.40, no.5, pp. 1325-1332, Sept. - Oct. 2004.

  7. T.Humiston and P.Pillay, "Parameter Measurements to Study Surge Propagation in Induction Machines," IEEE Transactions on Industry Applications, vol.40, no.5, pp. 1341-1348, Sept. – Oct. 2004.

  8. Y.Liu and P.Pillay, "Improved Torque Performance of Switched Reluctance Machines by Reducing the Mutual Saturation Effect," IEEE Transactions on Energy Conversion, vol. 19, no. 2, pp. 251-257, June 2004.

  9. Z.Tang, P.Pillay, A.Omekanda, C.Li and C.Centinkaya, "Young’s Modulus for Laminated Machine Structures With Particular Reference to Switched Reluctance Motor Vibrations," IEEE Transactions on Industry Applications, vol.40, no.3,pp. 748-754, May- June, 2004.

  10. L. Jianguo, H. Douglas and P. Pillay, "Wavelet Modeling of Motor Drives Applied to the Calculation of Motor Terminal Over Voltages,"  IEEE Transactions on Industrial Electronics, vol. 51, no. 1, pp. 61-66, Feb. 2004.

  11. J. Liu, P. Pillay and H. Douglas, "Wavelet Modeling of Motor Drives Applied to the Calculation of Motor Terminal Overvoltages," IEEE Transactions on Industrial Electronics, vol. 51, no. 1, pp. 61-66, Feb. 2004.

Back To Top
2003

  1. Z.Tang, P.Pillay, and A.Omekanda, "Vibration Prediction in Switched Reluctance Motors with Transfer Function Identification from Shaker and Force Hammer Tests," IEEE Transactions on Industry Applications, vol.39, no.4,pp. 978-985, July-Aug. 2003.

  2. W.Cai, P.Pillay, Z.Tang, and A.Omekanda, "Low-Vibration Design of Switched Reluctance Motors for Automotive Applications Using Modal Analysis," IEEE Transactions on Industry Applications, vol.39, no.4, pp. 971-977, July-Aug. 2003.

Back To Top
2002

  1. P.Pillay, "University/Industry Collaboration", Elektron Journal of the SAIEE, pp:12-14, Nov/Dec 2002.

  2. P.Pillay, P.Hofmann, and M.Manyage, "Derating of Induction Motors Operating with a Combination of Unbalanced Voltages and Over or Undervoltages," IEEE Transactions on Energy Conversion, vol.17, no.4, pp. 485-491, Dec.2002.

  3. W.Cai and P.Pillay, "Impact of Stator Windings and End Bells on Resonant Frequencies and Mode Shapes of Switched Reluctance Motors", IEEE Transactions on Industry Applications, vol. 38, no. 4, pp. 1027-1036, July-Aug. 2002.

Back To Top
2001 & Earlier

  1. T.H.Ortmeyer and P.Pillay, "Trends in Transportation Sector Technology Energy Use and Greenhouse Gas Emissions," Proceedings of  the IEEE, vol. 89, no. 12, pp.1837-1847, Dec. 2001.

  2. P.Pillay, M.Ahmed, and R.Samudio, "Modeling of a SRM Drive with Improved Ride-Through Capability", IEEE Transactions on Energy Conversion, vol. 16, no.2, pp.165-173, June 2001.

  3. P.Pillay and M.Manyage, "Definitions of Voltage Unbalance," IEEE Power Engineering Review, vol. 21, no. 5, pp. 50-51, May 2001.

  4. W.Cai and P.Pillay, "Resonant Frequencies and Mode Shapes of Switched Reluctance Motors," IEEE Transactions on Energy Conversion, vol. 16, no. 1, pp. 43-48, March 2001.

  5. D. Johnson, M. Melengret, and P. Pillay, "Electromechanical Storage for Rural Electrification," Journal of Energy in Southern Africa, vol. 12, no. 1, pp.322-328, Feb. 2001.

    6.

  6. P.Pillay, Y.Liu and O.G.Ormonde, "A Novel Switched Reluctance Motor Drive with Optical Graphical Programming Technology", IEEE Transactions on Industrial Electronics, Vol. 47, No.4, pp: 915-919, Aug 2000.

  7. L.Li, D.Czarkowski, Y.Liu and P.Pillay, "Multilevel Selective Harmonic Elimination PWM Technique in Series-Connected Voltage Inverters", IEEE Transactions on Industry Applications, pp.160-170, Jan/Feb 2000.

  8. J.Liu, P.Pillay, P.Ribeiro, "Wavelet Analysis of Power System Transients using Scalograms and Multiresolution Analysis", Electric Machines & Power Systems Journal, Vol. 27, No. 12, pp.1331-1342, Dec 1999.

  9. P.Nangsue, P.Pillay, S.Conry, "Evolutionary Algorithms for Induction Motor Parameter Determination", IEEE Transactions on Energy Conversion, Vol. 14, No.3, pp.447-453, Sept 1999.

  10. J.Liu and P.Pillay, "An Insight into Power Quality Disturbances Using Wavelet Multi-Resolution Analysis", IEEE Power Engineering Review, Vol. 13, No. 9, pp.59-60, Sept 1999.

  11. Y.Liu and P.Pillay, "A Start-up Control Algorithm for the Split-Link Converter for a Switched Reluctance Motor Drive", IEEE Transactions on Industrial Electronics, Vol. 46, No.3, pp.665-667, June 1999.

  12. P.Pillay and W.Cai, "An Investigation into Vibration in Switched Reluctance Machines", IEEE Transactions on Industry Applications, Vol. 35, No.3, pp: 589- 596, May/June 1999.

  13. P.Pillay, V.Levin, P.Otuday and J.Kueck, "In-situ Efficiency Determination of Induction Motors Using the Genetic Algorithm", IEEE Transactions on Energy Conversion, Vol. 13, No.4, pp.326-333, Dec 1998.

  14. J.Faiz, A.Servatian and P.Pillay, "Optimization of an Electronically Controlled Capacitor for a Single-Phase Induction Motor", Electric machines and power systems, Vol. 26, No.10, pp.1067-1080, Dec 1998.

  15. P.Pillay and Z.Xu, "Labview Implementation of Motor Current Signature Analysis for Mains-fed Motors", Power Engineering Letters, IEEE Power Engineering Review, pp.47-48, June 1998.

  16. J.Faiz, R.Iranpour and P.Pillay, "Thermal Model for a Switched Reluctance Motor of TEFC Design During Steady and Transient Operation", Electric Machines and Power Systems, Vol. 26, No 1, Jan 1998.

  17. P.Pillay, R.Nolan and T.Haque, "Application of Genetic Algorithms to Motor Parameter Determination for Transient Torque Calculations", IEEE Transactions on Industry Applications, pp.1273-1282, Sept/Oct 1997.

  18. P.Pillay, SMA.Sabur and M.Haq, "A model for Induction Motor Aggregation for Power System Studies", Electric Power Systems Research Journal, Vol. 42, pp.225-228, Aug 1997.

  19. E.Akpinar, P.Pillay and S. Sabur, "Modeling of Multimachine Transients during Unbalanced Power System Disturbances", Electric Power Systems Research Journal, Vol. 42, pp.17-20, July 1997.

  20. K.Cheek and P.Pillay, "Impact of Energy Efficient Motors in the Petrochemical Industry," Electric Power Systems Research Journal, Vol. 42, pp.11-15, July 1997.

  21. P.Pillay, "Practical Considerations in Applying Energy Efficient Motors in the Petrochemical Industry", IEEE IAS Magazine, Vol. 3, No.1, pp: 32-40, Jan/Feb 1997.

  22. P.Pillay and A.Bhattacharjee, "Application of Wavelets to Model Short-Term Power System Transients", IEEE Transactions on Power Systems, Vol. 11, No.4, pp: 2031-2037, Nov 1996.

  23. E.Akpinar, P.Pillay and G.Richards, "Induction Motor Drive Behavior during Unbalanced Faults", Electric Power Systems Research Journal," Vol. 36, No.2, pp: 131-138, 1996.

  24. P.Pillay, R.Samudio, M.Ahmed and R.Patel, "A chopper-controlled SRM Drive with Reduced Acoustic Noise and Improved Ride-through Capability Using Super-capacitors", IEEE Transactions on Industry Applications, Vol. 31, No 5, pp:1029-1038, Sept/Oct 1995.

  25. P.Pillay and K.Fendley, "The Contribution of Energy Efficient Motors to Demand and Energy Savings in the Petrochemical Industry", IEEE Trans. on Power Systems, Vol. 10, No. 2, pp: 1085-1093, May 1995.

  26. L.Refoufi and P.Pillay, "Harmonic Analysis of Slip Energy Recovery Induction Motor Drives", IEEE Transactions on Energy Conversion, Vol. 9, No 4, pp: 65-672, Dec 1994.

  27. E.Akpinar and P.Pillay, "Modeling and Performance of a 120o Square-Wave Inverter/Induction Machine Drive", Electric Power Systems Research Journal, Vol. 31 No.1, pp. 21-29, Oct 1994.

  28. J.Reynaud and P.Pillay, "Modeling of Saturation in Induction Machines Using EMTP, PSpice and a Dedicated Computer Program", Electric Power Systems Research Journal, vol. 30, no.3, pp. 279-285, Sept 1994.

  29. J.Reynaud and P.Pillay, "Reclosing Transients in Induction Machines Including Saturation of the Magnetizing Branch and a Practical Case Study", IEEE Transactions on Energy Conversion, pp. 383-389, June 1994.

  30. P.Pillay and Larbi Refoufi, "Calculation of the Steady State Performance of Slip Energy Recovery Induction Motor Drives Using the Equivalent Circuit", IEEE Trans on IA, Vol. 30, no. 1, pp. 154-163, Jan/Feb 1994. 

  31. L.Refoufi, P.Pillay and M.R.Harris, "A Step-down, Chopper-Controlled Slip Energy Recovery Induction Motor Drive", IEEE Transactions on Energy Conversion, vol. 8, no. 3,  pp. 396-403, Sept 1993.

  32. E.Akpinar, P.Pillay and A.Ersak, "Calculation of the Overlap Angle in Slip Energy Recovery Induction Motor Drives", IEEE Transactions on Energy Conversion, nol.8, No.2, pp. 229-235, June 1993.

  33. C.Allen and P.Pillay, "TMS320 Design for Vector and Current Control of AC Motor Drives", Electronics Letters, vol. 28, no 23, pp. 2188-2189, Nov 1992.

  34. E. Akpinar, P.Pillay and E.Ersak, "Starting Transients in Slip Energy Recovery Induction Motor Drives Part 1: Modeling and formulation", IEEE Transactions on Energy Conversion, vol. 7, No. 4,  pp. 238-244, March 1992.

  35. E. Akpinar, P.Pillay and E.Ersak, "Starting Transients in Slip Energy Recovery Induction Motor Drives- Part 2: Flowchart and performance", IEEE Transactions on Energy Conversion, Vol. 7, No. 4, pp. 245-251, March 1992.

  36. P.Pillay and R.Krishnan, "Application Characteristics of PM Synchronous and Brushless DC Motors for Servo Drives", IEEE Transactions on Industry Applications, vol. 27, no. 5, pp. 986-996, Sept/Oct 1991.

  37. E. Akpinar and P.Pillay, "A Computer Program to Predict the Performance of Slip Energy Recovery Induction Motor Drives", IEEE Transactions on Energy Conversion, vol. 5, No. 2, pp. 357-365, June 1990.

  38. P. Pillay and R. Krishnan, "Control Characteristics and Speed Controller Design for a High Performance Permanent Magnet Synchronous Motor Drive", IEEE Transactions on Power Electronics, Vol. 5, No.2, pp.151-159, April 1990. 

  39. E.Akpinar and P.Pillay, "Modeling and Performance of Slip Energy Recovery Induction Motor Drives" IEEE Transactions on Energy Conversion, Vol. 5, No.1, pp.203-210, March 1990.

  40. P.Pillay and R.Krishnan, "Modeling, Simulation and Analysis of Permanent Magnet Motor Drives‑ Part 1: The Permanent Magnet Synchronous Motor Drive", IEEE Trans on Industry Applications, pp. 265‑273, March/April 1989.

  41. P.Pillay and R.Krishnan, "Modeling, Simulation and Analysis of Permanent Magnet Motor Drives‑ Part 2: The Brushless DC Motor Drive", IEEE Transactions on Industry Applications, pp. 274‑279, March/April 1989.

  42. P.Pillay and R.Krishnan, "Modeling of Permanent Magnet Motors" IEEE Transactions on Industrial Electronics, pp.537‑541, Nov 1988.

  43. R.J. Lee, P. Pillay and R.G. Harley, "D,Q Reference Frames for the Simulation of Induction Motors," Electric Power Systems Research Journal, Elsevier, Switzerland, Vol. 8, No 1, pp.15‑26, March 1985.

  44. P. Pillay, R.G. Harley and E.J. Odendal, "The Effect of Link Current Ripple on the Torque Pulsations in a CSI‑Fed Induction Motor," Electric Power Systems Research Journal, Elsevier, Vol. 8, No 1, pp. 27‑40, March 1985.

  45. P. Pillay, R.G. Harley and E.J. Odendal, "A Comparison between Star and Delta Connected Induction Motors when Supplied by Current Source Inverters," Electric Power Systems Research Journal, Elsevier, Switzerland, Vol. 8, No 1, pp. 41‑51, March 1985.

  46. R.G. Harley, P. Pillay and E.J. Odendal, "Analyzing the Dynamic Behavior of an Induction Motor Fed from a Current Source Inverter," Transactions of the SAIEE, Vol. 75, No. 3, pp. 40‑49, Dec 1984.

  47. P. Pillay and R.G. Harley, "Comparison of Models for Predicting Disturbances Caused by Induction Motor Starting," Transactions of the SAIEE, Vol. 75, No. 3, pp. 60‑66, Dec 1984.

  48. P. Pillay, E.J. Odendal and R.G. Harley, "Torque and Speed Harmonic Analysis of a PWM CSI‑fed Induction Motor Drive," Transactions of the SAIEE, Vol. 75, No. 3, pp. 50‑59, Dec 1984.

Back To Top

***Last update: by Tamanwè Payarou on Monday, 01 March 2022***