-
Barman, Dwaipayani, Ph.D., Sep. 2021 "Electric Machine Design"
-
Basnet, Bigyani, Ph.D., Aug. 2021 "Electric Drives for Variable
Flux Machines"
-
Thike, Rajendrai, Ph.D., Dec. 2020 "Modeling and Parameter
Measurement of Special ElectricMachines"
-
Luo, Yang , M.A.Sc., Apr. 2020, "Electric Drives"
-
Bhalala, Jaydeep, M.A.Sc., Apr. 2020, "Prototyping a Novel Core
Loss Tester for Assembled Stator Lamination Stacks"
-
Sashidhar, Amitkumar Kortagerei, Ph.D., Mar. 2020- "Emulation of
Permanent Magnet Machines"
-
Vincent Prévost, M.A.Sc., Oct. 2019, Laboratory Electrical Model of
the Louis-Hippolyte Lafontaine Tunnel
-
M. Bijan, Ph.D., June, 2019 “Algorithms of Induction Machine
Efficiency Estimation,”
-
C. Desai, Ph.D., Mar. 2019 “Electric Machine Characterization,”
-
M. Masadeh, Ph.D., Feb. 2019 “Emulation of Induction Machines,”
-
S. Maroufian, Ph.D., Oct, 2018 “Synchronous Reluctance Machine
Performance and Design,”
-
A. Takbash, Ph.D., Sept. 2018 “Variable Flux Machine Design,”
-
A, Aljehaimi,Ph.D., Ph.D., Jun. 2018 “Variable Flux Machine Drive
System”
-
M. Ashourianjozdani, Ph.D., Jun. 2018 “Hydrokinetic-Diesel Hybrid
Energy Conversion System,”
-
M. Omer, M.A.Sc , Apr 2018 “Load Modeling for the LaFontein
Tunnel,”
-
T. Payarou, M.A.Sc., Aug. 2018 “Micro-Photosynthetic Power cell,
Modeling, Sensing, and Energy Harvesting,”
-
Fadoul Souleyman, Ph.D., Sep. 2017 “Power Management and Control
Strategies of Renewable Energy Resources for a Micro-grid,”
co-supervisor with Prof Ambrish Chandra at Ecole Polytechnique
Superior.
-
J. Akiror, Ph.D., Apr. 2017 “Core Loss Measurement in Large Hydro
Generators,” co-supervisor with Dr. Arezki Merkouf of IREQ,
Hydro-Quebec.
-
J. Wanjiku, Ph.D, Nov. 2015, "2-D Core Loss Measurements and their
Applications to Rotating AC Electrical Machines," at Concordia
University.
-
H. Akbarian, M.A.Sc, Aug. 2015, "Design of Power Electronics Based
Emulator for Study of Microgrid Related Applications," at Concordia
University.
-
J. Maisonneuve, Ph.D, Aug. 2015, "Osmotic Power for Remote
Communities in Quebec," at Concordia University.
-
M. Al-Badri, Ph.D, Jul. 2015, "Algorithms for induction
motors efficiency determination," at Concordia University.
-
L. Masisi, Ph.D, Mar. 2015, "Design and development of
novel traction electric drives for synchronous reluctance and PM
synchronous machine," at Concordia University.
-
M. Taghavi, Ph.D, Mar. 2015, "Design of Synchronous
Reluctance Machines (SynRM) for Automotive Applications," at Concordia
University.
-
A. Choudhury, Ph. D, Mar. 2015, "Three-Level Neutral Point
Clamped (NPC) Traction Inverter Drive for Electric Vehicle
Applications," at Concordia University.
-
N. Curry, Ph.D, Mar. 2014, "Waste to Energy Solutions for
the Urban Environmentfor Environment," at Concordia
University.
-
M. Ibrahim, Ph.D, Dec. 2014,
"Application of Magnetic Hysteresis Modeling to the Design and Analysis
of Electrical Machines," at Concordia University.
-
C. De Beer, Ph.D, Dec. 2014, "High
Temperature Fuel Cell", Co-advisor at the University of Cape Town.
-
O. Dzune Mipoung, Ph.D, Oct.
2012,"Enhancement of Frequency Support Capabilities of Type 1 and Type
2 Wind Turbines," at Concordia University.
-
R. Namuli, Ph.D, Sept. 2012,
"Optimisation of biomass waste to energy conversion systems for rural
grid-connected applications," at Concordia University.
-
N.Alatawneh, Ph.D, Sept. 2012,
"Design of a Test Fixture for Rotational Core Losses in Electrical
Machine Laminations," at Concordia University.
-
J. Akiror, M.A.Sc, Sept. 2012, "Model
for Core Loss Prediction at High Frequency and High Flux Density," at
Concordia University.
-
A. G. Siraki, Ph.D, Aug
2012,"Efficiency Estimation of Induction Machines with Limited
Measurements," at Concordia University.
-
M. Sikhder, M.A.Sc, April 2012,
"Advanced Temperature Modeling of Solar PV," at Concordia University.
-
S. Darghahi, M.A.Sc., Nov. 2011,
"Gallium-nitride-based power electronic converter design, prototyping
and test for automotive power management and renewable energy
applications," at Concordia University.
-
M.Ibrahim, M.A.Sc., Sept. 2011,
"Modeling of core losses in electrical machines laminations exposed to
high frequency and non-sinusoidal flux," at Concordia University.
-
F. Endrejat, Ph.D, Dec. 2010, "MW
size drives for the petrochemical industry," advisor at UCT.
-
N.Curry, MASc, Aug. 2010, "Modeling
and Design of urban biomass waste to energy," at Concordia University.
-
R.Okou, Ph.D, June 2010, "Flywheel
Design," advisor at University of Cape Town.
-
G.Lindner, M.S., April
2009,"Instrumentation for Farm Heat and Power," at Clarkson University.
-
P. Ijumba, M.Sc, Dec 2008,"Impact of
Solar Water Heaters on ESKOM’s maximum demand," advisor at
University of Cape Town.
-
G.Rui, M.S., Dec 2008, "Magnetic
bearing design" at Clarkson University.
-
R.Naidoo, PhD, June 2008, "Power
Quality", advisor at University of Cape Town.
-
M.Manyage, PhD, June, 2008, "Traction
Motor Design," advisor at University of Cape Town.
-
R.Solomon, M.S., June 2008, "Energy
efficient lighting", co-advisor with Dr. Sebitosi at University
of Cape Town.
-
Y.Weldetnsae, M.S., 2008, "Heat and
power optimization from farm waste".
-
H. Li, Ph.D, May 2008, "Linear
Generator Design Powered from Bridge Vibrations".
-
A. Gebregergis, Ph.D, Dec 2007, "Fuel
Cell and fuel cell emulator modeling and diagnosis of a fuel cell".
-
D. Johnson, Ph.D Dec 2007, "Design
Considerations and Implementation of an Electromechanical Battery
System".
-
P. Barendse, Ph.D, Dec 2007, "The
application of advanced signal processing techniques to the condition
monitoring of electrical machine drive systems".
-
S. Masemola, M.S., Dec 2007,
"Generation of Electrical Power from Farm Waste".
-
M. A. Khan, Ph.D., Dec 2006,
"Contributions to Permanent Magnet Wind Generator Design Including the
Application of Soft Magnetic Composites" advisor at the University of
Cape Town.
-
T. Roth, M.S., Dec 2006, "Novel
equipment for Lamination Loss Measurements".
-
L. Dosiek, M.S., May 2006, "Cogging
Torque Analysis of PM Machines".
-
L. Mthombeni, Ph.D., May 2006,
"Losses in motor laminations".
-
P. Barendse, M.S., April 2005, "Wind
Energy Drives" (UCT).
-
T. Humiston, Ph.D., May 2005,
"Parameter measurements to study surge prpagation in induction
machines," at Clarkson University.
-
H. Douglas, Ph.D., May 2005,
"Condition Monitoring of Energy ConversionEquipment," at Clarkson
University.
-
Yu Sun, M.S., May 2005, "Induction
motor design," at Clarkson University.
-
S. Chhoun, M.S., Dec 2004,
"Methane-based Fuel Cells," at Clarkson University.
-
Y. Chen, Ph.D., Dec 2004, "Novel WInd
Generator Topologies," at Clarkson University.
-
A.B. Sebitosi, Ph.D., Dec 2004,
"Applications of Advances in Automotive to Rural Electrification in
Sub-Saharan Africa," external advisor at the University of Cape Town.
(UCT)
-
J. Otter, M.S., Dec 2003,"Redesign of
a PM generator for multi-blade turbines," at Clarkson University.
-
T. Gaunt, Ph.D, Dec
2003,"Electrification Technology and Processes to meet Economic and
Social Objectives in Southern Africa," co-advisor with Profs Bennet and
Davidson at the University of Cape Town.
-
L. T. Mthombeni, M.S., Dec
2003,"Losses in
motor laminations exposed to high frequency and nonsinusoidal
excitations"
-
Z. Tang, Ph.D, Sept 2002, "Vibration
analysis and reduction in switched reluctance motors"
-
S. Naidu, M.S., Sept 2002, "Motor
lamination losses"
-
M. Manyage, M.Sc, Dec 2001,"Operation
of induction motors in the presence of unbalanced supplies," advisor at
the University of Cape Town.
-
S. Khumalo, M.Sc, Dec 2001,"Induction
motor variable speed drive performance and impact on energy savings,"
advisor at the University of Cape Town.
-
L. Chen, M.S., June 2001,
"Encoder-based control of drives," at Clarkson University.
-
W. Cai, PhD, April 2000, "Vibrations
in switched reluctance motors," at Clarkson University.
-
J. Liu, PhD, March 2000, "Wavelet
modeling of power transients," at Clarkson University.
-
T. Humiston, M.S., March 2000, "Flux
weakening operation of switched reluctance motor drives," at Clarkson
University.
-
Y. Liu, PhD, May 1999, "Improved
design of switched reluctance motor drives," at Clarkson University.
-
V. Rajbabu, M.S.,June 1998,
"Improvement of speed observer performance using motor current
signature analysis," at Clarkson University.
-
J. Jiang, M.S., May 1998, "Power
signal processing using wavelet analysis," co-chair with
Dr.J.Koplowitz.
-
P. Ramkumar, M.S., June, 1997, "DSP
implementation of Motor Current Signature Analysis".
-
T. Ren, M.S., June 1997,
"Overvoltages in variable speed drives with long cables".
-
V. Levin, M.S., August 1996,
"Modeling, efficiency determination and analysis of induction
motors".
-
A. Bhattarcharjee, M.S., Jan1996,
"Application of wavelets to model short term power system
transients".
-
M. Haq, M.S., August 1995, "Reclosing
transients in machines and the design of a reclosing relay for
induction machines".
-
Z. Xu, M.S., August 1995, "On line
speed estimation of induction motors".
-
S.M.A. Sabur, M.S., July 1995,
"Reclosing transients in a refinery".
-
M. Ahmed, M.S., May 1995, "Modeling
and performance of switched reluctance motors with improved
ride-through capability and reduced acoustic noise".
-
T. Haque, M.S., March 1995,
"Parameter
determination and reclosing transients in motors and motor drives".
-
I. Sanchez, M.S. August 1994,
"Reclosing transients in induction and synchronous machines".
-
R. Samudio, M.S., May 1994 "DSP
Control of switched reluctance motors with improved ride-through
capability".
-
R. Nolan, M.S., May 1994,
"Parameter determination and reduced order modeling to calculate
reclosing transients in induction motors".
-
R. Patel, M.S. April 1994,
"Converters for modern drives".
-
V.S.C. Raviraj, M.S., May 1993,
"Algorithms to calculate torque in switched reluctance motors".
-
M. Wu, M.S., August 1992, "Efficiency
calculations for permanent magnet motor drives".
-
J. Reynaud, M.S., Sept 1992,
"Modeling and performance of induction machines subjected to supply
dips and discontinuities".
-
L. Refoufi, PhD, Dec 1991, "Modeling
and performance of a chopper-controlled slip energy
recovery drive", co-advisor with Prof Alan Jack at the University of
Newcastle upon Tyne.
-
E. Akpinar, PhD, April 1991,
"Transient and steady state modeling and closed-loop control of slip
energy recovery induction motor drives" co-advisor with Dr.A.Ersak at
METU.
-
A. Glanville, M.Eng, May 1990,
"Microprocessor control of a switched reluctance motor drive",
(co-chair with Dr Barrie Mecrow of the University of Newcastle upon
Tyne).
-
D. A. Wilkinson, M.Eng, May 1990,
"Design of a switched reluctance motor drive", (co-chair with Dr Barrie
Mecrow).
Back To Top
|