Conference: Building Physics

The 6th Symposium on Building Physics in the Nordic Countries, in Trondheim, Norway, June 17-19, 2002 Online source, All papers in pdf, downloadable

11th SYMPOSIUM FOR BUILDING PHYSICS from September 26th to 30th 2002 in Dresden.

http://www.ti.kviv.be/conf/buildphys.htm


Related References:

• Conference
  Abdou, A. A., Budaiwi , I. M., (2005), Comparison of thermal conductivity measurements of building insulation materials under various operating temperatures
• Conference
  Adl-Zarrabi, B. and A. H?gberg, (2002), Determination and validation of the microclimate load: Driving rain and solar radiation
• Conference
  Anderlind, G., (1997), High accuracy heat flow calculation - a method to calculate the heat flow for an arbitrary wall with constant material properties in a natural climate
• Conference
  Arfvidsson, J., (1999), A new algorithm to calculate the isothermal moisture penetration for periodically varying relative humidity at the boundary
• Conference
  Becker, R. and Putterman, M., (2002), Patterned mold growth on rendered facades in Israel - A consequence of substrate thermal insulation
• Conference
  Bednar, T., (2002), Approximation of liquid moisture transport coefficient of porous building materials by suction and drying experiments. Demands on determination of drying curve
• Conference
  Blocken, B., (2004), Quantification of driving rain as a boundary condition for water flow modelling in building parts
• Conference
  Blocken, B., Desadeleer, W. and Carmeliet, J., (2002), Wind, rain and the building envelope: studies at the Laboratory of Building Physics, KULeuven
• Conference
  Bomberg, M., Carmeliet, J., Grunewald, J., Holm, A., Karagiozis, A., Kuenzel, H. and Roels, S., (2002), Position paper on material characterization and HAM model benchmarking
• Conference
  Bomberg, M., Pazera, M., Haghighat, F. and Grunewald, J., (2002), Modified cup for testing of water vapour transmission through thick, permeable materials
• Conference
  Carmeliet, J. and S. Roels, (2002), Description of the moisture capacity of building materials
• Conference
  Christensen, G. and Bunch-nielsen, T., (2002), A "follow-up" study of moisture conditions and performance of moisture sensors in flat roofs provided with exterior insulation in the late seventies
• Conference
  Drchalova, J., Pavlik, Z. and Cerny, R., (2002), A comparison of various techniques for determination of moisture diffusivity from moisture profiles
• Conference
  Grunewald, J., Plagge, R. and H?upl, P., (2002), A two-levelled hygrothermal material database for the numerical simulation program DELPHIN4
• Conference
  Gudmundsson, K., (2002), Isotopic analysis of moisture transport
• Conference
  Gudmundsson, K., (2001), Isotopic tracing of moisture in buildings
• Conference
  Hagentoft, C. and H?gberg, A., (2002), Prediction of driving rain intensities using potential flows
• Conference
  Hansen, E. and Hansen, M. H., (2002), TDR measurement of moisture content in aerated concrete
• Conference
  Hansen, M. H., Nicolajsen, A. and Stang, B. D., (2002), On the influence of cavity ventilation on moisture content in timber frame walls
• Conference
  Holm, A. and K¨ąnzel, H.M, (1999), Combined effect of temperature and humidity of the detoriation process of insulation materials in ETICS
• Conference
  Holm, A.H. and H.M. K¨ąnzel, (2002), Uncertainty of hygrothermal calculations
• Conference
  Kalagasidis, A.S. and Hagentoft, C., (2002), Simulink modelling tool for HAM system analyses in building physics
• Conference
  Karagiozis, A., (2002), A North American research approach to moisture design by modeling
• Conference
  Komulainen, J., Lu, X., Hakkarainen, H., Weckstr?m, A., Viljanen, M. and S. Liukkonen, (2003), Diffusion of some MVOCs through building moisture barriers
• Conference
  Krus, M., Sedlbauer, K., Zillig, W. and Kunzel, H.M, (2001), A new model for mould prediction and its application on a test roof
• Conference
  Kumaran, M.K.; Mukhopadhyaya, P.; Cornick, S.M.; Lacasse, M.A.; Maref, W.; Rousseau, M.Z.; Nofal, M.; Quirt, J.D.; Dalgliesh, W.A, (2002), A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
• Kunzel, H. M., (2000), Moisture risk assessment of roof constructions by computer simulation in comparison to the standard Glaser-method
• Conference
  Kurkinen, K. and Hagentoft, C., (2002), Durability control by means of hygrothermal history in building components
• Conference
  Kvande, T., Time, B. and Waldum, A. M., (2002), Capacity of rendering systems to resist rain penetration
• Conference
  Levin, P., (2000), Moisture in constructions with loose-fill insulation and no vapour barrier
• Conference
  Mukhopadhyaya, P., Goudreau, P., Kumaran, M. K. and van Reenen, D., (2002), Influence of material properties on the moisture response of an ideal stucco wall: results from hygrothermal simulation
• Conference
  Nielsen, A., (1999), 3D room models for moisture balance calculations
• Conference
  Nielsen, A., (2002), Use of FMEA - failure modes effects analysis on moisture problems in buildings
• Conference
  Ojanen, T., Salonvaara, M. and Simonson, C. J., (2002), Integration of simplified drying tests and numerical simulation in moisture performance analysis of the building envelope
• Conference
  Padfield, T., Peuhkuri, R., Rode, C. and Hansen, K. K., (2002), Non-isothermal water vapour transmission through porous insulation. Part 1: The climate chamber
• Conference
  Rode, C., Kalagasidis, A. S., Gudum, C., Hagentoft, C., Weitzman, P., Peuhkuri, R. and Nielsen, T.R., Holman, J. P., (2000), International building physics toolbox, general report
• Conference
  Rode, C., Mitamura, T., Schultz, J. and Padfield, T., (2002), Test cell measurements of moisture buffer effects
• Conference
  Rode, P. C., (1990), Transient calculation of moisture migration using a simplified description of hysteresis in the sorption isotherms
• Conference
  Samuelson, I. and Nielsen, A., (2002), Checklists for clean and moisture safe buildings
• Conference
  Sedlbauer, K., (2002), Prediction of mould fungus formation on the surface of and inside building components
• Conference
  Sedlbauer, K., Krus, M. and Zillig, W., (2002), A new model for mould prediction and its application on dwellings with mould on the outer facades
• Conference
  S?derstr?m, O., (1999), On analysis of cup method measurements on hygroscopic materials with surface coatings
• Conference
  Stang, B. D., Nicolajsen, A. and Hansen, M. H., (2002), Moisture in combined concrete timber-frame walls without vapour barrier
• Conference
  Straube, J.F. and Burnett, E.F.P, (2000), Simplified prediction of driving rain deposition
• Conference
  Svennberg, K., (2003), Determination of moisture properties for materials exposed to the indoor air
• Conference
  van Mook, F., (1999), Measurements and simulations of driving rain on the main building of the TUE
• Conference
  van Schijndel, A. W. M., (2002), Solving building physics problems based on PDEs with FEMLAB
• Conference
  Vandersteen, K., Roels, S., Carmeliet, J. and Feyen, J., (2002), Modeling fluid flow in fractured media using continuum, network and discrete aproaches
• Conference
  Vinha, J., K?kel?, P. and Lindberg, R., (2002), Moisture transport in timber-framed external wall structures in Nordic climate - laboratory tests
• Conference
  Wang, J. K. and Hagentoft, C., (2001), A numerical method for calculating combined heat, air and moisture transport in building envelope components
• Conference
  Yver?s, V., (2002), Performance indicators as a tool for decisions in the building process