A numerical and an analytical model were developed to predict the volatile organic compound (VOC) emission rate from dry building materials. Both models consider the mass diffusion process within the material and the mass convection and diffusion processes in the boundary layer. All the parameters, the mass diffusion coefficient of the material, the material/air partition coefficient, and the mass transfer coefficient of the air can be either found in the literature or calculated using known principles.

The predictions of the models were validated at two levels: with experimental results from the specially designed test and with predictions made by a CFD model. The results indicated that there was generally good agreement between the model predictions, the experimental results, and the CFD results. The analytical and numerical models then were used to investigate the impact of air velocity on emission rates from dry building materials. Results showed that the impact of air velocity on the VOC emission rate increased as the VOC diffusion coefficient of the material increased. For the material with a diffusion coefficient > 10(-10) m(2)/s, the VOC emission rate increased as the velocity increased; air velocity had significant effect on the VOC emission. For the material with a VOC diffusion coefficient < 10(-10) m(2)/s, the VOC emission rate increased as the velocity increased only in the short-term; < 24 h. In the medium to long-term time range, the VOC emission rate decreased slightly as the air velocity increased; velocity did not have much impact on these materials. Furthermore, the study also found that the VOC concentration distribution within the material; the VOC emission rate and the VOC concentration in the air were linearly proportional to the initial concentration. However, the normalized emitted mass was not a function of the initial concentration: it was a function of the properties of the VOC and the material. (C) 2002 Elsevier Science Ltd. All rights reserved.

• VOC transport

1. An integrated zonal model for predicting transient VOC distribution in a ventilated room  

1. An integrated zonal model for predicting transient VOC distribution in a ventilated room
2. An integrated zonal model to predict transient indoor humidity distribution
3. Assessing long-term performance of centralized thermal energy storage system
4. Best Practice for Architects and Engineers
5. Centralized latent heat thermal energy storage system: Model development and validation
6. Designing building envelope with PCM wallboards: Design tool development
7. Energy-Storing Wallboard: Flammability Tests
8. Final Report, IEA, annex 23, applying energy storage in buildings of the future
9. Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
10. Modeling moisture accumulation in multi-layered building materials, MODELING MOISTURE IN RESIDENTIAL BUILDINGS WITH A MULTIZONE IAQ PROGRAM
11. Modeling of phase change materials for applications in whole building simulation
12. Modified cup for testing of water vapour transmission through thick, permeable materials
13. Optimization of ventilation system design and operation in office environment
14. Zonal Models for Indoor Air Flow - A Critical Review