DIN: German standard DIN (Deutsches Institut f¨ąr Normung)

DIN 41009, Electrical telecommunication; component mounting position contact and/or terminal numbering order , 81/12/00

DIN 41013, Electrical communication engineering; three-way jack , 83/06/00

DIN 41014, Electrical communication engineering; four-way jack , 85/08/00

DIN 41015, Electrical communication engineering; jacks and jack strips; requirements, tests , 86/01/00

DIN 4102-1, Fire behaviour of building materials and building components - Part 1: Building materials; concepts, requirements and tests , 97/03/00

DIN 4102-11, Fire behaviour of building materials and building components; pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing , 85/12/00

DIN 4102-12, Fire behaviour of building materials and components - Part 12: Realiability of electric systems; requirements and testing , 95/02/00

DIN 4102-13, Fire behaviour of building materials and elements; fire resistant glazing; concepts, requirements and testing , 90/05/00

DIN 4102-14, Fire behaviour of building materials and elements; determination of the burning behaviour of floor covering systems using a radiant heat source , 90/05/00

DIN 4102-15, Fire behaviour of building materials and elements 'Brandschacht' , 90/05/00

DIN 4102-16, Fire behaviour of building materials and building components - Part 16: 'Brandschacht' tests , 97/03/00

DIN 4102-17, Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing , 90/12/00

DIN 4102-18, Fire behaviour of building materials and components; fire barriers, verification of automatic closure (continuous performance test) , 91/03/00

DIN 4102-2, Fire Behaviour of Building Materials and Building Components; Building Components; Definitions, Requirements and Tests , 77/09/00

DIN 4102-3, Fire Behaviour of Building Materials and Building Components; Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests , 77/09/00

DIN 4102-4, Fire behaviour of building materials and building components; synopsis and application of classified building materials, components and special components , 94/03/00

DIN 4102-4 Berichtigung 1, Corrigenda to DIN 4102-4:1994-03 , 95/05/00

DIN 4102-4 Berichtigung 2, Corrigenda to DIN 4102-4:1994-03 , 96/04/00

DIN 4102-5, Fire Behaviour of Building Materials and Building Components; Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests , 77/09/00

DIN 4102-6, Fire Behaviour of Building Materials and Building Components; Ventilation Ducts; Definitions, Requirements and Tests , 77/09/00

DIN 4102-7, Fire behaviour of building materials and building components; roof coverings; terminology, requirements and testing , 87/03/00

DIN 4102-7/A1, Fire behaviour of building materials and components - Part 7: Roofing; definitions, requirements and testing; Amendment A1 , 96/08/00

DIN 4102-8, Fire behaviour of building materials and components; small scale test furnace , 86/05/00

DIN 4102-9, Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing , 90/05/00

DIN 41020, Electrical communication engineering; contactors, designations , 74/08/00

DIN 4103-1, Internal non-loadbearing partitions; requirements, testing , 84/07/00

DIN 4103-2, Internal non-loadbearing partitions; gypsum wallboard partitions , 85/12/00

DIN 4103-4, Internal non-loadbearing partitions; partitions with timber framing , 88/11/00

DIN 41050-1, Visual call systems; definitions , 91/02/00

DIN 41050-2, Luminous call systems; installation, equipment, call indication , 82/06/00

DIN 4107, Suboil; Settlement observations during and after construction of structures , 78/01/00

DIN 41071-1, Hands for electric clocks; wedged hands , 76/11/00

DIN 41071-2, Hands for electric clocks; hole-shaped hands , 76/11/00

DIN 41072, Hand-shafts for electric clocks; connecting dimensions , 78/03/00

DIN 41073, Hand-bushings for electric clocks; connecting dimensions , 78/03/00

DIN 41074, Suspension-points on electrical clocks for rooms , 74/11/00

DIN 41075, Visibility for Electric Clocks , 74/04/00

DIN 41077, Two-pole plug for polarized secondary clocks; connecting dimensions , 80/04/00

DIN 41078, Brackets for secondary clocks and single clocks; connecting dimensions , 80/04/00

DIN 41079, Fastening of clockworks an dials for electric secundary clocks; mounting dimensions , 74/02/00

DIN 4108 Beiblatt 1, Thermal insulation in buildings; indexes; list of subjects , 82/04/00

DIN 4108-1, Thermal insulation in buildings; quantities and units , 81/08/00

DIN 4108-2, Thermal insulation in buildings - Part 2: Thermal insulation and heat storage; requirements and directions for design and construction , 95/11/00

DIN 4108-20, Thermal performance of buildings - Part 20: Internal temperatures in sommer of a room without mechanical cooling; General criteria and calculation procedures (Proposal for a European Standard) , 95/07/00

DIN 4108-21, Thermal insulation in buildings - Part 21: External walls; air permeability; test method (Proposal for a European Standard) , 95/11/00

DIN 4108-3, Heat insulation in buildings; Protection against moisture caused by the climate; Requirements and directions for planning and construction , 81/08/00

DIN 4108-3/A1, Thermal insulation in buildings - Part 3: Protection against moisture subject to climate conditions; requirements and directions for design and construction; Amendment A1 , 95/11/00

DIN 4108-4, Thermal insulation in buildings - Part 4: Characteristic values relating to thermal insulation and protection against moisture , 95/11/00

DIN 4108-5, Heat insulation in buildings; Calculation methods , 81/08/00

DIN 41080-1, Time service; basic and general concepts , 79/12/00

DIN 41080-2, Time service; concepts, terms and structure of time centres , 79/12/00

DIN 41080-3, Time service; concepts and terms of master clocks , 79/12/00

DIN 41080-4, Time service; concepts, terms and structure of secondary clocks , 79/12/00

DIN 41080-5, Time service; concepts, classification, terms and structure of timers , 79/12/00

DIN 41080-6, Time service; concepts and classification of single clocks , 79/12/00

DIN 4109, Sound insulation in buildings; requirements and testing , 89/11/00

DIN 4109 Beiblatt 1, Sound insulation in buildings; construction examples and calculation methods , 89/11/00

DIN 4109 Beiblatt 2, Sound insulation in buildings; guidelines for planning and execution; proposals for increased sound insulation; recommendations for sound insulation in personal living and working areas , 89/11/00

DIN 4109 Beiblatt 3, Sound insulation in buildings - Calculation of R for assessing suitability as defined in DIN 4109 on the basis of the sound reduction index R determined in laboratory tests , 96/06/00

DIN 4109 Berichtigung 1, Amendments to DIN 4109/11.89, DIN 4109 Bbl 1/11.89 and DIN 4109 Bbl32550 , 92/08/00

DIN 41090, Dials and hands for electric clocks; survey and relationship , 76/02/00

DIN 41091-1, Dials for electric clocks; minute-stroke dials , 76/02/00

DIN 41091-3, Dials for electric clocks; hour-stroke dials , 76/04/00

DIN 41091-4, Dials for electric clocks; number dials , 74/02/00

DIN 41092-3, Hands for electric clocks; bar-shaped hands , 76/02/00

DIN 41096-1, Electric sirens for a.c. voltages from 125 to 500 V; main dimensions and technical values , 79/05/00

DIN 41096-2, Electric sirens for a.c. voltages from 125 to 500 V; technical delivery terms , 79/05/00

DIN 41096-3, Electric sirens for a.c. voltages from 125 to 500 V; rating plate , 79/05/00

DIN 41096-4, Electric sirens for a.c. voltages from 125 to 500 V; protective shield , 79/05/00

DIN 41097-1, Steel tube support for electrical siren 125-500 V a.c. standard type with and without electric protective insulation, parts list , 64/02/00

DIN 41097-4, Steel-tube support for electrical sirens 125 to 500 V; skylight , 68/08/00

DIN 41097-6, Accessories for electric sirens; foot-brigde and exit plank , 83/05/00

DIN 41098-1, Switch box for electric sirens for voltages up to 380 V, principal dimensions and circuit diagram , 69/09/00

DIN 41098-2, Switch box for electric sirens for voltages up to 380 V, technical terms of delivery , 69/09/00

DIN 41098-3, Switch box for electric sirens for a.c. voltages up to 380 V; rating plate , 79/06/00

DIN 41099-3, Determination of the dimensions of electrical component parts; height of components having two one-sided wire terminations , 73/01/00

DIN 41099-4, Determination of the dimensions of capacitors and resistors having two one-sided wire terminations , 74/09/00

DIN 41099-5, Determination of the dimensions of electrical component parts; length of the two one-sided wire terminations , 81/05/00

DIN 41100, Rectangular metal casings for electrical engineering; stamped, cold extruded, drawn , 74/09/00

DIN 41107, Compression type glass-metal seals , 74/09/00

DIN 4111, Derricks and masts - Design calculations (Proposal for a European standard) ,



Web Links:

ASHRAE-American Society of Heating, Refrigerating and Air-Conditioning Engineers

"the sole purpose of advancing the arts and sciences of heating, ventilation, air conditioning and refrigeration for the public's benefit through research, standards writing, continuing education and publications."




ISO: International Standards Organization

"a worldwide federation of national standards bodies from more than 140 countries, one from each country. to promote the development of standardization and related activities in the world with a view to facilitating the international exchange of goods and services, and to developing cooperation in the spheres of intellectual, scientific, technological and economic activity."

• ASHRAE STANDARD 110 THROUGH STANDARD 169
• ASTM standards related to building envelopes
• ASTM Standards related to buildings
• New European Standards
• Standards associated with plywood
• Standards for windows by CAN, CGSB, CSA, ASTM, AAMA
• Standards related to lightning
• Standards for windows by CAN, CGSB, CSA, ASTM, AAMA
• Standards related to lightning
• Standards associated with plywood
• New European Standards
• ICC International Code Council
• What are standards?