Conceptual Reference Database for Building Envelope Research Prev
Next
Related Concept
  • built environment
  • standards
  • life cycle assessment (LCA)
  • standards: ASTM
  • envelope
  • building
  • VOC
  • VOC transport
  • VOC: measurement and identification



    • Related References
  • Charette, R. P. and Marshall, H. E., (1999), UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Cost Analysis




    		• Essay:

    ASTM Standards related to buildings

    This is a long list (347 in total) of search on "Building" on This link has not been checked.ASTM site (not all of them are actually related to the building that we live in):
    1. E1334-95(1999) Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
    2. E1557-01 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
    3. E2129-01 Standard Practice for Data Collection for Sustainability Assessment of Building Products
    4. E1700-95(1999) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope 1,2
    5. E1494-92(1996) Standard Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials
    6. E1679-95(1999) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
    7. E917-99 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
    8. E577-85(1999) Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
    9. C1060-90(1997)e1 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
    10. C976-90(1996)e1 Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box
    11. C236-89(1993)e1 Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box
    12. E1186-98 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems
    13. E651-92(1998)e1 Standard Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
    14. E241-00 Standard Guide for Limiting Water-Induced Damage to Buildings
    15. C1321-98 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
    16. C1155-95(2001) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
    17. E966-99 Standard Guide for Field Measurement of Airborne Sound Insulation of Building Facades and Facade Elements
    18. E119-00a Standard Test Methods for Fire Tests of Building Construction and Materials
    19. D4216-00 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds
    20. C1158-97 Standard Practice for Use and Installation of Radiant Barrier Systems (RBS) in Building Construction
    21. E2026-99 Standard Guide for the Estimation of Building Damageability in Earthquakes
    22. E1480-92(1998)e1 Standard Terminology of Facility Management (Building-Related)
    23. E621-94(1999)e1 Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380)
    24. E541-84(1998)e1 Standard Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
    25. E1991-98 Standard Guide for Environmental Life Cycle Assessment of Building Materials/Products
    26. E1699-00 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
    27. E1664-95a(1999) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
    28. E1558-99 Standard Guide for Electrolytic Polishing of Metallographic Specimens
    29. E1185-93(1998)e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
    30. E779-99 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
    31. E713-88(1999)e1 Standard Guide for Selection of Scales for Metric Building Drawings
    32. E632-82(1996) Standard Practice for Developing Accelerated Tests to Aid Prediction of the Service Life of Building Components and Materials
    33. E631-93a(1998)e1 Standard Terminology of Building Constructions
    34. E336-97 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings
    35. D6245-98 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
    36. E2128-01 Standard Guide for Evaluating Water Leakage of Building Walls
    37. E2083-00 Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
    38. E1836-98 Standard Classification for Building Floor Area Measurements for Facility Management
    39. E1765-98 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
    40. E1669-95a(1999) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
    41. E1369-98 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
    42. E1332-90(1998) Standard Classification for Determination of Outdoor-Indoor Transmission Class
    43. E1121-98 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
    44. E1074-93(1998)e1 Standard Practice for Measuring Net Benefits for Investments in Buildings and Building Systems
    45. E1057-99 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
    46. E964-93(1998)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
    47. E833-01 Standard Terminology of Building Economics
    48. E783-93 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
    49. E580-00 Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Requiring Moderate Seismic Restraint
    50. E283-91(1999) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    51. C727-90(1996)e1 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
    52. C387-00e1 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
    53. B370-98 Standard Specification for Copper Sheet and Strip for Building Construction
    54. B101-96 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
    55. E1017-88(1994) Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies
    56. E699-99 Standard Criteria for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating Building Components in Accordance with Test Methods Promulgated by ASTM Committee E-6
    57. E84-01 Standard Test Method for Surface Burning Characteristics of Building Materials
    58. A755/A755M-99 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
    59. E1971-98 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
    60. E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
    61. E1825-96 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
    62. E1796-97 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    63. E1680-95 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
    64. E1677-95(2000) Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
    65. E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
    66. E1464-92(1999) Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
    67. E575-99 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
    68. E154-99 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
    69. D4803-97 Standard Test Method for Predicting Heat Buildup in PVC Building Products
    70. D4226-00 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
    71. C717-01a Standard Terminology of Building Seals and Sealants
    72. C11-98 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
    73. A992/A992M-00 Standard Specification for Steel for Structural Shapes For Use in Building Framing
    74. E1946-98 Standard Practice for Measuring Cost Risk of Buildings and Building Systems
    75. E1368-00 Standard Practice for Visual Inspection of Asbestos Abatement Projects
    76. E90-99 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
    77. C1501-01 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    78. C1375-00 Standard Guide for Substrates Used in Testing Building Seals and Sealants
    79. C1374-97 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
    80. C1363-97 Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
    81. C1313-00 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
    82. C1224-01 Standard Specification for Reflective Insulation for Building Applications
    83. C1046-95(2001) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
    84. C1021-01 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
    85. C981-95 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
    86. C687-96 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
    87. C570-00 Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction
    88. C62-01 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
    89. E1996-01 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes
    90. E1701-95(1999) Standard Classification for Serviceability of an Office Facility for Manageability 1,2
    91. E1666-95a(1999) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
    92. E1258-88(1998) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
    93. D5791-95 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
    94. D3043-00 Standard Methods of Testing Structural Panels in Flexure
    95. C1242-00 Standard Guide for Design, Selection, and Installation of Stone Anchors and Anchoring Systems
    96. C1058-97 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
    97. C991-00 Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
    98. E1574-98 Standard Test Method for Measurement of Sound in Residential Spaces
    99. E1481-00a Standard Terminology of Railing Systems and Rails for Buildings
    100. E1423-99 Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems
    101. E987-88(1994)e1 Standard Test Methods for Deglazing Force of Fenestration Products
    102. E497-99 Standard Practice for Installing Sound-Isolating Lightweight Partitions
    103. E489-92(1997) Standard Test Method for Tensile Strength Properties of Metal Connector Plates
    104. D5364-93e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units
    105. D2688-94(1999)e1 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
    106. C1226-93(1998)e1 Standard Test Method for Soluble Chlorides in Asbestos
    107. C1036-91(1997) Standard Specification for Flat Glass
    108. C901-93a Standard Specification for Prefabricated Masonry Panels
    109. E2127-01 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    110. E2032-99e1 Standard Guide for Extension of Data From Fire Endurance Tests
    111. E2013-99 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
    112. E1908-97 Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)
    113. E1693-95(1999) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
    114. E1692-95a(1999) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
    115. E1667-95a(1999) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
    116. E1665-95a(1999) Standard Classification for Serviceability of an Office Facility for Facility Protection
    117. E1554-94 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
    118. E1433-95 Standard Guide for Selection of Standards on Environmental Acoustics
    119. E1425-91(1999) Standard Practice for Determining the Acoustical Performance of Exterior Windows and Doors
    120. E1110-01 Standard Classification for Determination of Articulation Class
    121. E985-00e1 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
    122. E814-00 Standard Test Method for Fire Tests of Through-Penetration Fire Stops
    123. E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
    124. E648-00 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
    125. E557-00 Standard Guide for The Installation of Operable Partitions
    126. E529-94(1998)e1 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
    127. E196-95(2000) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
    128. E136-99e1 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC
    129. E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
    130. D6670-01 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
    131. D5862-99a Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
    132. D5533-98e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine
    133. D3957-90(1996)e1 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
    134. D2394-83(1999) Standard Method for Simulated Service Testing of Wood and Wood-Base Finish Flooring
    135. D1494-97 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
    136. C1498-01 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
    137. C1401-98 Standard Guide for Structural Sealant Glazing
    138. C1376-97 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass
    139. C1289-01 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
    140. C1134-90(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
    141. C1115-00 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
    142. C836-00 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
    143. C726-00a Standard Specification for Mineral Fiber Roof Insulation Board
    144. C652-01 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
    145. C636-96 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
    146. C635-00 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
    147. G90-98 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
    148. F2021-00 Standard Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems
    149. F1994-99 Standard Test Method for Shipboard Fixed Foam Firefighting Systems
    150. F1901-98 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
    151. F1875-98 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface
    152. F1757-96 Standard Guide for Digital Communication Protocols for Computerized Systems
    153. F1575-95 Standard Test Method for Determining Bending Yield Moment of Nails
    154. F1554-99 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
    155. F1531-94 Standard Test Method for Comparing Printer or Copier Cartridges
    156. F1499-00 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
    157. F1450-97 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities
    158. F1412-01 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
    159. F1265-90(1994)e1 Standard Test Method for Resistance to Impact for Resilient Floor Tile
    160. F1090-87(1997)e1 Standard Classification for Bank and Mercantile Vault Construction
    161. F1037-87(1998) Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
    162. F856-97 Standard Practice for Mechanical Symbols, Shipboard Heating, Ventilation, and Air Conditioning (HVAC)
    163. F547-77(1995) Standard Terminology of Nails for Use with Wood and Wood-Base Materials
    164. F537-01 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
    165. F476-84(1996) Standard Test Methods for Security of Swinging Door Assemblies
    166. F336-97 Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
    167. F118-97 Definitions of Gaskets
    168. E2151-01 Standard Termninology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
    169. E2145-01 Standard Practice for Modeling in Health Informatics
    170. E2141-01 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
    171. E2136-01 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
    172. E2121-01 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
    173. E2119-00 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
    174. E2115-00 Standard Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children
    175. E2103-00 Standard Classification for Bridge Elements and Related Approach Work
    176. E2087-00 Standard Specification for Quality Indicators for Controlled Health Vocabularies
    177. E2081-00 Standard Guide for Risk-Based Corrective Action
    178. E2078-00 Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data
    179. E2052-99 Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities
    180. E1886-97 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
    181. E1807-96 Standard Terminology Pertaining to Metal Connector Plates
    182. E1804-96 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
    183. E1803-99 Standard Test Methods for Determining Structural Capacities of Insulated Panels
    184. E1797-00 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    185. E1795-00 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    186. E1749-00 Standard Terminology Relating to Rigid Wall Relocatable Shelters
    187. E1694-95a(1999) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
    188. E1671-95a(1999) Standard Classification for Serviceability of an Office Facility for Cleanliness
    189. E1670-95a(1999) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
    190. E1668-95a(1999) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
    191. E1663-95a(1999) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
    192. E1662-95a(1999) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
    193. E1661-95a(1999) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
    194. E1660-95a(1999) Standard Classification for Serviceability of an Office Facility for Support for Office Work
    195. E1637-98 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    196. E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
    197. E1567-93(2001) Standard Guide for Biopharmaceutical Facilities Architectural Design Considerations
    198. E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
    199. E1333-96 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
    200. E1321-97a Standard Test Method for Determining Material Ignition and Flame Spread Properties
    201. E1317-97a Standard Test Method for Flammability of Marine Surface Finishes
    202. E1224-94 Standard Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes
    203. E989-89(1999) Standard Classification for Determination of Impact Insulation Class (IIC)
    204. E935-00e1 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
    205. E835/E835M-93(1999) Standard Guide for Modular Coordination of Clay and Concrete Masonry Units
    206. E800-99 Standard Guide for Measurement of Gases Present or Generated During Fires
    207. E756-98 Standard Test Method for Measuring Vibration-Damping Properties of Materials
    208. E603-98a Standard Guide for Room Fire Experiments
    209. E546-88(1999)e1 Standard Test Method for Frost Point of Sealed Insulating Glass Units
    210. E488-96 Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
    211. E413-87(1999) Standard Classification for Rating Sound Insulation
    212. E162-98e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
    213. E108-00 Standard Test Methods for Fire Tests of Roof Coverings
    214. E73-83(1996)e1 Standard Practice for Static Load Testing of Truss Assemblies
    215. E69-99 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
    216. D6669-01 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
    217. D6622-01 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
    218. D6439-99 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
    219. D6342-98 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
    220. D6329-98 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
    221. D5957-98 Standard Guide for Flood Testing Horizontal Waterproofing Installations
    222. D5952-96e1 Standard Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
    223. D5843-95(2000)e1 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
    224. D5741-96 Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
    225. D5683-95(1999)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
    226. D5651-95a Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
    227. D5329-96 Standard Test Methods for Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    228. D5319-97 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
    229. D5206-96 Standard Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding
    230. D5082-99 Standard Practice for the Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
    231. D5036-99 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
    232. D5014-94(2000)e1 Standard Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology)
    233. D4861-00 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
    234. D4720-87(2000) Standard Practice for Evaluation of the Performance of Soft Window Coverings
    235. D4674-89(1997) Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
    236. D4618-92(1996) Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
    237. D4477-96a Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
    238. D4396-99a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
    239. D4145-83(1996)e1 Standard Test Method for Coating Flexibility of Prepainted Sheet
    240. D4028-96 Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
    241. D3931-93a(1999)e1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
    242. D3915-99a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
    243. D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
    244. D3730-98 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
    245. D3679-01 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
    246. D3678-97 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
    247. D3656-97 Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
    248. D3309-96a Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
    249. D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
    250. D3138-95 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
    251. D2019-97 Standard Test Method for Dirt in Paper and Paperboard
    252. D2017-81(1994)e1 Standard Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
    253. D1784-99a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
    254. D1779-98 Standard Specification for Adhesive for Acoustical Materials
    255. D1670-98 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
    256. D1000-99 Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
    257. D115-98 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
    258. D9-87(1999) Standard Terminology Relating to Wood
    259. C1503-01 Standard Specification for Silvered Flat Glass Mirror
    260. C1496-01 Standard Guide for Assesment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
    261. C1491-01 Standard Specification for Concrete Roof Pavers
    262. C1472-00 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
    263. C1464-00 Standard Specification for Bent Glass
    264. C1452-00 Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
    265. C1427-99a Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
    266. C1422-99 Standard Specification for Chemically Strengthened Flat Glass
    267. C1410-98 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
    268. C1394-98 Standard Guide for In-Situ Structural Silicone Glazing Evaluation
    269. C1381-97 Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
    270. C1364-97 Standard Specification for Architectural Cast Stone
    271. C1361-96(2001) Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
    272. C1355/C1355M-96 Standard Specification for Glass Fiber Reinforced Gypsum Composites
    273. C1340-99 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
    274. C1330-96 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
    275. C1311-95 Standard Specification for Solvent Release Sealants
    276. C1299-99 Standard Guide for Use in Selection of Liquid-Applied Sealants
    277. C1265-94(1999) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
    278. C1246-00 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
    279. C1201-91(1996) Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
    280. C1199-00 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
    281. C1184-00ae1 Standard Specification for Structural Silicone Sealants
    282. C1183-91(1997) Standard Test Method for Extrusion Rate of Elastomeric Sealants
    283. C1172-96e1 Standard Specification for Laminated Architectural Flat Glass
    284. C1154-99 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
    285. C1135-00 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
    286. C1132-95 Standard Practice for Calibration of the Heat Flow Meter Apparatus
    287. C1130-90(2001) Standard Practice for Calibrating Thin Heat Flux Transducers
    288. C1126-00 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
    289. C1083-00 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
    290. C1055-99 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
    291. C1048-97b Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass
    292. C1016-94a Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
    293. C1014-99ae1 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
    294. C963-00 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
    295. C957-93(1998) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
    296. C946-91(1996)e1 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
    297. C919-98 Standard Practice for Use of Sealants in Acoustical Applications
    298. C898-01 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
    299. C896-99 Standard Terminology Relating to Clay Products
    300. C890-91(1999)e1 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
    301. C864-99 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
    302. C857-95 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
    303. C843-99 Standard Specification for Application of Gypsum Veneer Plaster
    304. C834-00e1 Standard Specification for Latex Sealants
    305. C828-98 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
    306. C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
    307. C797-99 Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds
    308. C794-01 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
    309. C793-91(1997)e1 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
    310. C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
    311. C782-99 Standard Test Method for Softness of Preformed Tape Sealants
    312. C755-97 Standard Practice for Selection of Vapor Retarders for Thermal Insulation
    313. C728-97 Standard Specification for Perlite Thermal Insulation Board
    314. C719-93(1998) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
    315. C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants
    316. C716-00 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
    317. C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
    318. C657-93(1998) Standard Test Method for D-C Volume Resistivity of Glass
    319. C647-95(2000) Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
    320. C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
    321. C629-99 Standard Specification for Slate Dimension Stone
    322. C627-93(1999) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
    323. C616-99 Standard Specification for Quartz-Based Dimension Stone
    324. C615-99 Standard Specification for Granite Dimension Stone
    325. C603-90(1997)e1 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
    326. C591-00 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
    327. C578-00 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
    328. C568-99 Standard Specification for Limestone Dimension Stone
    329. C509-00 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
    330. C503-99e1 Standard Specification for Marble Dimension Stone (Exterior)
    331. C461-81(1997)e1 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
    332. C411-97 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
    333. C410-60(1997) Standard Specification for Industrial Floor Brick
    334. C220-91(1999) Standard Specification for Flat Asbestos-Cement Sheets
    335. C207-91(1997) Standard Specification for Hydrated Lime for Masonry Purposes
    336. C184-94e1 Standard Test Method for Fineness of Hydraulic Cement by the 150-¦Ìm (No. 100) and 75-¦Ìm (No. 200) Sieves
    337. C97-96e1 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
    338. C43-01 Standard Terminology of Structural Clay Products
    339. C5-79(1997) Standard Specification for Quicklime for Structural Purposes
    340. B882-00 Specification for Pre-Patinated Copper for Architectural Applications
    341. B766-86(1998) Standard Specification for Electrodeposited Coatings of Cadmium
    342. B650-95 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
    343. A896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures
    344. A750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas
    345. A627-95 Standard Specification for Homogeneous Tool-Resisting Steel Bars for Security Applications
    346. A529/A529M-00 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
    347. A6/A6M-01 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling





    More info of this article can be found on the web at: This link has not been checked.http://www.astm.org





    Web Links:
      ASTM
      "provides a global forum for the development and publication of voluntary consensus standards for materials, products, systems, and services"


    Related Articles:


    CRDBER, at CBS, BCEE, ENCS, Concordia,