Publications

From TMG
Revision as of 22:00, 24 August 2021 by Mmedraj (Talk | contribs)
Jump to: navigation, search

a) Publications in Refereed Journals

[131] Gujba, A. K.; Mahdipoor, M.S.; Medraj, M. (2021). "Water droplet impingement erosion performance of WC based coating sprayed by HVAF and HVOF", Wear, In-Press May 2021.

[130] Fayed, E.M.; Saadati, M.; Shahriari, D.; Brailovski, V.; Jahazi, M.; Medraj, M. "Optimization of the Post-Process Heat Treatment of Inconel 718 Superalloy Fabricated by Laser Powder Bed Fusion Process", Metals, 2021, 11(1), 144. https://doi.org/10.3390/met11010144

[129] Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi and Mamoun Medraj, "Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion", Scientific Reports , 11, 2020 (2021), https://doi.org/10.1038/s41598-021-81618-5.

[128] Eslam M. Fayed, Davood Shahriari, Mohammad Saadati, Vladimir Brailovski, Mohammad Jahazi and Mamoun Medraj, "Influence of Homogenization and Solution Treatments Time on the Microstructure and Hardness of Inconel 718 Fabricated by Laser Powder Bed Fusion Process", Materials, 2020, 13(11), 2574.

[127] Abdullahi K. Gujba and Mamoun Medraj, "Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties", Advances in Materials Science and Engineering, 2020, Article ID 1064870, 17 pages

[126] Mohammad Elhadi Ibrahim and Mamoun Medraj, "Water Droplet Erosion of Wind Turbine Blades: Mechanics, Testing, Modeling and Future Perspectives", Materials, 2020, 13(1), 157.

[125] Jian Wang, Zhang Zhang, Yi-Nan Zhang, Dong Han, Liling Jin, Liyuan Sheng, Patrice Chartrand, Mamoun Medraj, "Investigation on metallic glass formation in Mg-Zn-Sr ternary system by the CALPHAD method", Materials Letters, 256 (2019) 126628.

[124] Tian Wang, Mamoun Medraj, "Intrinsic magnetic properties of Ce2(Fe, Co)14B and its modifications by Ni and Cu", Journal of Alloys and Compounds, 763 (2018) 916-925; https://doi.org/10.1016/j.jallcom.2018.06.017

[123] Kayode Orimoloye, Dmytro Kevorkov and Mamoun Medraj, “Phase equilibria and magnetic phases in the Fe-rich regions of the Ce-Fe-{Ni, Si, Al}-B quaternary systems", Journal of Alloys and Compounds, 763 (2018) 289-295.

[122] Raiyan Seede, Ahmad Mostafa, Vladimir Brailovski, Mohammad Jahazi and Mamoun Medraj, “Microstructural and Microhardness Evolution from Homogenization and Hot Isostatic Pressing on Selective Laser Melted Inconel 718: Structure, Texture, and Phases”, Manufacturing and Materials Processing, 2018, 2, 30. DOI:10.3390/jmmp2020030

[121] Tian Wang, Mamoun Medraj, "Magnetic force microscopic study of Ce2(Fe, Co)14B, and its modifications by Ni and Cu", Journal of Magnetism and Magnetic Materials, 460 (2018) 95–103; https://doi.org/10.1016/j.jmmm.2018.03.058

[120] Kayode Orimoloye, Dominic H. Ryan, Frederick E. Pinkerton and Mamoun Medraj, "Intrinsic Magnetic Properties of Ce2Fe14B Modified by Al, Ni, or Si", Applied Sciences, 2018, 8(2), 205; doi:10.3390/app8020205

[119] Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi and Mamoun Medraj, "Hot compression behavior and microstructure of selectively laser-melted IN718 alloy", The International Journal of Advanced Manufacturing Technology, Vol. 96, pp. 371-385, 2018. DOI:10.1007/s00170-017-1522-4

[118] Hany S. Kirols, Dmytro Kevorkov, Andreas Uihlein and Mamoun Medraj "Water droplet erosion of stainless steel steam turbine blades" Materials Research Express, 2017, Volume 4, ID 086510

[117] Ahmad Mostafa, Mamoun Medraj, "Binary phase diagrams and thermodynamic properties of silicon and essential doping elements (Al, As, B, Bi, Ga, In, N, P, Sb and Tl)", Materials, 2017, 10(6), 676; DOI: 10.3390/ma10060676

[116] Ahmad Mostafa , Ignacio Picazo Rubio , Vladimir Brailovski , Mohammad Jahazi , Mamoun Medraj, "Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments", Metals, 2017, 7(6), 196. DOI:10.3390/met7060196

[115] H.R. Bakhsheshi-Rada, E. Hamzah, S.L. Joy Yii, A. Mostafa, R. Ebrahimi-Kahrizsangi, M. Medraj, “Characterization and thermodynamic calculations of biodegradable Mg-2.2Zn-3.7Ce and Mg-Ca-2.2Zn-3.7Ce alloys”, Materials Science and Technology, 2017. Vol. 33, Issue 11, pp. 1333-1345. DOI: 10.1080/02670836.2017.1288777

[114] H. Bakhsheshi, E. Hamzah, H. Low, M. Cho, M. Kasiri, S. Farahany, A. Mostafa, M. Medraj, “Thermal characteristics, mechanical properties, in-vitro degradation and cytotoxicity of novel biodegradable Zn-Al-Mg and Zn-Al-Mg-xBi alloys”, Acta Metallurgica Sinica (English letters), Volume 30, Issue 3, pp 201–211.

[113] T. Wang, D. Kevorkov, and M. Medraj, "Phase Equilibria and Magnetic Phases in the Ce-Fe-Co-B System", Materials, Vol. 10, Issue 1, 2017, 16-42.

[112] A.K. Gujba, L. Hackel, and M. Medraj, "Water Droplet Erosion Performance of Laser Shock Peened Ti-6Al-4V", Metals, Vol. 6, Issue 11, 2016, 262-283

[111] H. R. Bakhsheshi-Rad, E. Hamzah, S. Bagheriyan, M. Daroonparvar, M. Kasiri-Asgarani, A. M. Shah, M. Medraj, "Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy", Journal of Materials Engineering and Performance, Volume 25, Issue 9, 2016, 3948–3959

[110] Abdullahi K. Gujba, Zhencheng Ren, Yalin Dong, Chang Ye, Mamoun Medraj, "Effect of ultrasonic nanocrystalline surface modification on the water droplet erosion performance of Ti-6Al-4V", Surface and Coatings Technology, Volume 307, 2016, 157–170

[109] H.R. Bakhsheshi-Rad, E. Hamzah, A.F. Ismail, M. Kasiri-Asgarani, M. Daroonparvar, S. Parham, N. Iqbal, M. Medraj, "Novel bi-layered nanostructured SiO2/Ag-FHAp coating on biodegradable magnesium alloy for biomedical applications", Ceramics International, Volume 42, Issue 10, 2016, 11941–11950

[108] H.R. Bakhsheshi-Rad, E. Hamzah, R. Ebrahimi-Kahrizsangi, M. Daroonparvar, M. Medraj, "Fabrication and characterization of hydrophobic microarc oxidation/poly-lactic acid duplex coating on biodegradable Mg–Ca alloy for corrosion protection", Vacuum, Volume 125, 2016, 185–188

[107] Saida Abdessameud and Mamoun Medraj, "Thermodynamic Analysis of the Dehydrogenation Path of Al-Li-Mg-Na Alloys", CALPHAD, Volume 54, 2016, 54-66

[106] H.R. Bakhsheshi-Rad, E. Hamzah, A.F. Ismail, M. Daroonparvar, M.A.M. Yajid, M. Medraj, "Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on Mg–Ca alloy", Journal of Alloys and Compounds, Volume 658, 2016, 440–452

[105] H.S. Kirols, M.S. Mahdipoor, D. Kevorkov, A. Uihlein and M. Medraj, "Energy based approach for understanding water droplet erosion", Materials & Design, Volume 104, 2016, 76-86

[104] A.K. Gujba, L. Hackel, D. Kevorkov, and M. Medraj, "Water Droplet Erosion Behaviour of Ti-6Al-4V and Mechanisms of Material Damage at the Early and Advanced Stages", Wear, Volumes 358-359, 2016, 109-122

[103] Xin Zhang, Yi-Nan Zhang, Dmytro Kevorkov and Mamoun Medraj, "Experimental investigation of the Mg-Zn-Zr ternary system at 450°C", Journal of Alloys and Compounds, Volume 680, 2016, 212-225

[102] Saida Abdessameud and Mamoun Medraj, "Understanding the hydrogen storage behaviour of Promising Al-Mg-Na compositions using thermodynamic modeling", Journal of Materials for Renewable and Sustainable Energy, Volume 5, issue 2,2016, 1-29

[101] M.S. Mahdipoor, D. Kevorkov, P. Jedrzejowski and M. Medraj, "Water droplet erosion behavior of gas nitrided Ti6Al4V", Journal of Surface and Coatings Technology, Volume 292, 2016, 78-89

[100] Z. Zhu, M.A. Gharghouri, M. Medraj, S.Y. Lee, A.D. Pelton, "Thermodynamic modelling and in-situ neutron diffraction investigation of the (Ce+ Mg+ Zn) system", The Journal of Chemical Thermodynamics, Volume 93, 2016, 242-254

[99] M.S. Mahdipoor, D. Kevorkov, P. Jedrzejowski and M. Medraj, "Water droplet erosion mechanism of nearly fully-lamellar gamma TiAl alloy", Materials & Design, Volume 89, 2016, 1095-1106

[98] Mezbahul-Islam M, Kevorkov D, Medraj M. "Experimental study of the Mg-Ni-Y system at 673 K using diffusion couples and key alloys", Metals, Volume 5, Issue 3, 2015, 1746-1769

[97] M.S. Mahdipoor, H.S. Kirols, D. Kevorkov, P. Jedrzejowski and M. Medraj, "Influence of impact speed on water droplet erosion of TiAl compared with Ti6Al4V", Scientific Reports, Volume 5, 2015, Article # 14182

[96] H.S. Kirols, D. Kevorkov, A. Uihlein, M. Medraj "The effect of initial surface roughness on water droplet erosion behaviour", Wear, Volumes 342–343, 2015, 198–209

[95] Dina Ma, Ahmad Mostafa, Dmytro Kevorkov, Pawel Jedrzejowski, Martin Pugh, Mamoun Medraj, "Water impingement erosion of deep rolled Ti64", Metals, Vol. 5, Issue 3, 2015, 1462-1486 (Article Statistics)

[94] J. Wang, Y.N. Zhang, P. Hudon, P. Chartrand, and M. Medraj “Experimental determination of the phase equilibria in the Mg-Zn-Sr ternary system”, Journal of Materials Science, Vol. 50, 2015, 7636-7646

[93] M.S. Mahdipoor, F. Tarasi, C. Moreau, A. Dolatabadi, M. Medraj "HVOF sprayed coatings of nano-agglomerated tungsten-carbide/cobalt powders for water droplet erosion application", Wear, Volumes 330-331, 2015, 338–347

[92] J. Wang, Y.N. Zhang, P. Hudon, P. Chartrand and M. Medraj, “Experimental study of the crystal structure of the Mg15-xZnxSr3 ternary solid solution in the Mg-Zn-Sr system at 300 ℃”, Journal of Materials and Design, Vol. 86, 2015, 305-312

[91] J. Wang, Y.N. Zhang, P. Hudon, M.Medraj and P. Chartrand, “Experimental study of the phase equilibria in the Mg-Zn-Ag ternary system at 300 ℃”, Journal of Alloys and Compounds, Vol.639, 2015, 593-601

[90] Mohammad Mezbahul-Islam, Mamoun Medraj, "Thermodynamic modeling of Cu–Ni–Y system coupled with key experiments", Materials Chemistry and Physics, Vol. 153, 2015, 32–47

[89] Ahmad Mostafa and Mamoun Medraj, "Experimental investigation of the Mg-Nd-Zn isothermal section at 300 ºC", Metals, Volume 5, Issue 1, 2015, 84-101 (PDF version) (Article Statistics)

[88] A. K. Gujba and M. Medraj, "Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening". Materials, Vol. 7, 2014, 7925-7974

[87] Jian Wang, Pierre Hudon, Dmytro Kevorkov, Patrice Chartrand, Mamoun Medraj, "Thermodynamic and Experimental Study of the Mg-Sn-Ag-In Quaternary System", Journal of Phase Equilibria and Diffusion, Vol. 35, issue 3, 2014, 284-313

[86] Hamid Reza Bakhsheshi-Rad, Esah Hamzah, Safaa N. Saud and Mamoun Medraj, "Effect of Electrodeposition Parameters on the Microstructure and Corrosion Behavior of DCPD Coatings on Biodegradable Mg–Ca–Zn Alloy", Int. J. Appl. Ceram. Technol., Vol. 12, issue 5, 2015, 1054–1064

[85] H. R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, M. A. M. Yajid, M. Kasiri-Asgarani, M. R. Abdul-Kadir, M. Medraj, “In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite”, Trans. Nonferrous Met. Soc. China, Vol. 24, 2014, 2516−2528

[84] Saida Abdessameud, Mohammad Mezbahul-Islam, and Mamoun Medraj, Thermodynamic modeling of hydrogen storage capacity in Mg-Na alloys, The Scientific World Journal, Vol. 2014, Article ID 190320, 2014. PDF version

[83] Y.N. Zhang, X. Cao, P. Wanjara and M. Medraj, “Tensile properties of laser additive manufactured Inconel 718 using filler wire”, Special issue: The Materials Science of Additive Manufacturing, Journal of Materials Research, Vol. 29, 2014, 2006-2020

[82] T. Wang, D. Kevorkov, A. Mostafa, and M. Medraj, "Experimental investigation of the phase equilibria in the Al-Mn-Zn system at 400°C", Journal of Materials, vol. 2014, Article ID 451587, 13 pages, 2014. doi:10.1155/2014/451587

[81] A. Mostafa and M. Medraj, "On the atomic interdiffusion in Mg-{Ce,Nd,Zn} and Zn-{Ce,Nd} binary systems", Journal of Materials Research, 29(13), (2014) 1463-1479. (Article Statistics)

[80] H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar,M. Kasiri-Asgarani, M. Medraj, "Synthesis and biodegradation evaluation of nano-Si and nano-Si/TiO2 coatings on biodegradable Mg–Ca alloy in simulated body fluid", Journal of Ceramics International", Volume 40, Issue 9, 2014, 14009–14018

[79] Ahmad Mostafa, and Mamoun Medraj, "Phase Equilibria of the Ce-Mg-Zn Ternary System at 300 °C", Metals 2014, 4(2), 168-195; doi:10.3390/met4020168. (PDF version). (Article Statistics)

[78] Ahmad Mostafa, and Mamoun Medraj, "Experimental investigation of the Mg-Mn-Nd isothermal section at 450°C", Journal of Alloys and Compounds, 608 (2014) 247-257.

[77] H.R. Bakhsheshi-Rad, E. Hamzah, A. Fereidouni-Lotfabadi, M. Daroonparvar, M.A.M. Yajid, M. Mezbahul-Islam, M. Kasiri-Asgarani, M. Medraj, "Microstructure and bio-corrosion behavior of Mg–Zn and Mg–Zn–Ca alloys for biomedical applications", Materials and Corrosion, Volume 65, Issue 12, 2014, 1178–1187.

[76] M. Mezbahul-Islam, Y.N. Zhang, C. Shekhar and M. Medraj, “Critical assessment and thermodynamic modeling of Mg-Ca-Zn system supported by key experiments”, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, Volume 46, pp 134–147 (2014). (Article Statistics)

[75] Dmytro Kevorkov, Mamoun Medraj, Mohammad Aljarrah, Jian Li, Elhachmi Essadiqi, Patrice Chartrand, and Carl Fuerst, "Experimental study of the Al-Mg-Sr phase diagram at 400ºC", Journal of Metallurgy, Volume 2014 (2014), Article ID 690623, 6 pages, doi: 10.1155/2014/690623.

[74] H. R. Bakhsheshi-Rad, E. Hamzah, M. Medraj, M. H. Idris, A. F. Lotfabadi, M. Daroonparvar and M. A. M. Yajid, "Effect of heat treatment on the microstructure and corrosion behaviour of Mg–Zn alloys", Materials and Corrosion, Volume 65, Issue 10, 2014, 999-1006

[73] Ahmad Mostafa, and Mamoun Medraj, Experimental investigation of the Ce-Mg-Mn isothermal section at 723K (450°C) via diffusion couples technique, Metallurgical and Materials Transactions A, 45 (2014) 3144-3160.PDF version.

[72] Bolarinwa Komolafe and Mamoun Medraj, "Progress in Wettability Study of Reactive Systems”, Journal of Metallurgy,Volume 2014 (2014), Article ID 387046, 14 pages. PDF version

[71] Md. Mezbahul Islam, Ahmad Mostafa, and Mamoun Medraj, "Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical Data", Journal of materials, Volume 2014 (2014), Article ID 704283, 33 pages. PDF version

[70] M. Mezbahul-Islam and M. Medraj, "Phase equilibrium in Mg-Cu-Y", Scientific Reports (Published by Nature Publishing Group), Vol. 3, (2013) Article number: 3033 doi:10.1038/srep03033. PDF version (Article Statistics)

[69] Y.N. Zhang, X. Cao, P. Wanjara and M. Medraj, “Oxide Films in Laser Additive Manufactured Inconel 718”, Acta Materialia, Vol. 61, 6562-6576 (2013). (Article Statistics)

[68] Md. I. Khan, A. Mostafa, M. Aljarrah, E. Essadiqi and M. Medraj, "Influence of cooling rate on microsegregation behavior of magnesium alloys", Journal of Materials, Vol. 2014, Article ID 657647, 18 pages, 2014. doi:10.1155/2014/657647 PDF version

[67] X. Cao, A. S. H. Kabir, P. Wanjara, J. Gholipour, A. Birur, J. Cuddy, M. Medraj, "Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V", Metallurgical and Materials Transactions A, Volume 45, Issue 3, pp 1258-1272 (2014).

[66] H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, R. Ebrahimi-Kahrizsangi, M. Medraj, "In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg-Ca alloys for biomedical applications", Ceramics International, Volume 40, pp 7971–7982(2014)

[65] A. Changizi, M. Medraj, and M. Isac, "Effect of Casting Parameters on the Microstructural and Mechanical Behavior of Magnesium Az31-B Alloy Strips Cast on a Single Belt Casting Simulator", Advances in Materials Science and Engineering, Volume 2014, Article ID 101872, 9 pages. PDF version

[64] H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul-Kadir, A. Ourdjini, M. Medraj, M. Daroonparvara, E. Hamzaha, “Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys", Materials and Design, Vol. 53, 283-292 (2014) (Article Statistics)

[63] J Wang, P Hudon, D Kevorkov, P Chartrand, M Medraj, "Experimental and thermodynamic study of the Mg–Sn–In–Zn quaternary system", Journal of Alloys and Compounds, Vol. 588, 75–95 (2014). PDF version

[62] A. Mostafa, A. E. Gheribi, M. Mezbahul-Islam, D. Kevrokov, and M. Medraj, "Experimental Investigation and First-Principle Calculations Coupled with Thermodynamic Modeling of the Mn-Nd Phase Diagram", Calphad, Vol. 42, 27-37 (2013). PDF version. (Article Statistics)

[61] J. Yi, M. Gharghouri, P. Bocher and M. Medraj, "Distortion and Residual Stress Measurements of Induction Hardened AISI 4340 Discs", Journal of Materials Chemistry and Physics, Vol. 142, Issue 1, 248-258 (2013) (Article Statistics)

[60] M. Mezbahul-Islam and M. Medraj, “Experimental study of the Cu-Ni-Y system at 700°C using diffusion couples and key alloys”, Journal of Alloys and Compounds, Vol. 561, Issue 5, 161-173 (2013)

[59] M. Shamekh, M. Pugh and M. Medraj, “Processing and Characterization of In-situ (TiC-TiB2)p/AZ91D Magnesium Matrix Composites”, Advanced Engineering Materials, Volume 15, Issue 8, 708–717 (2013)

[58] P. Ghosh and M. Medraj, “Thermodynamic Calculation of the Mg-Mn-Zn and Mg-Mn-Ce Systems and Re-optimization of their Constitutive Binaries”, CALPHAD, Vol. 41, 89-107 (2013)

[57] Y.N. Zhang, X.D. Liu, Z. Altounian and M. Medraj, “Coherent nano-scale ternary precipitates in crystallized Ca4Mg72Zn24 metallic glass”, Scripta Materialia, Vol. 68, 647-650 (2013).

[56] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “Enhancement of amorphous phase formation in alumina–YSZ coatings deposited by suspension plasma spray process", Journal of Surface and Coating Technologies, Vol. 220, 191-198 (2013)

[55] Y.N. Zhang, G.J. Rocher, B. Briccoli, D. Kevorkov, X.B. Liu, Z. Altounian and M. Medraj, “Crystallization characteristics of the Mg-rich metallic glasses in the Ca-Mg-Zn system”, Journal of Alloys and Compounds, Vol. 552, 88-97 (2013).

[54] L. Jin, D. Kevorkov, M. Medraj, P. Chartrand, "Thermodynamic evaluations and optimizations of Al–Mg–RE (RE: La, Ce, Pr, Nd, Sm) systems coupled with key experiments and Miedema’s model estimations", Journal of Chemical Thermodynamics, Vol. 58, 166-195 (2013)

[53] A.S.H. Kabir, X. Cao, P. Wanjara, J. Cuddy, A. Birur and M. Medraj, “Use of filler wire for laser welding of Ti–6Al–4V”, Canadian Metallurgical Quarterly, Vol. 51, Issue 3, 320-327 (2012).

[52] G. Arzpeyma, A.E. Gheribi, M. Medraj, "On the prediction of Gibbs energy of mixing of binary liquid alloys", Journal of Chemical Thermodynamics. Vol. 57, 82-91 (2013).

[51] D. Kevorkov, Y.N. Zhang, K. Shabnam, P. Chartrand and M. Medraj, “Experimental investigation of the phase equilibria of the Al-Ca-Zn system at 623 K”, Journal of Alloys and Compounds, Vol. 539, 97-102 (2012).

[50] M. Shamekh, M. Pugh and M. Medraj, "Understanding the reaction mechanism of in-situ synthesized (TiC-TiB2)/AZ91 magnesium matrix composites", Materials Chemistry and Physics, Vol. 135, Issue 1, 193-205 (2012).

[49] F. Tarasi, M. Medraj, A. Dolatabadi, C. Moreau, R.S. Lima and J. Oberste-Berghaus, "Thermal Cycling of Suspension Plasma Sprayed Alumina-YSZ Coatings Containing Amorphous Phases", Journal of the American Ceramic Society, Vol. 95, Issue 8, 2614-2621 (2012).

[48] A.S.H. Kabir, X. Cao, J. Gholipour, P. Wanjara, J. Cuddy, A. Birur, M. Medraj, "Effect of post-weld heat treatment on microstructure, hardness, and tensile properties of laser welded Ti-6Al-4V”, Metallurgical and Materials Transactions A, Vol. 43, Issue 11, 4171-4184 (2012).

[47] Y.N. Zhang, D. Kevorkov, X.D. Liu, F. Bridier, P. Chartrand and M. Medraj, “Homogeneity range and crystal structure of the Ca2Mg5Zn13 compound”, Journal of Alloys and Compounds, Vol. 523, 75-82 (2012).

[46] S. Raygan, M. Pourabdoli, H. Abdizadeh, M. Medraj, “Synthesizing Nanostructured Ni75Mg16.66Y8.34 (at.%) Powder by Solid State Reaction and Mechanical Milling", Journal of Materials and Manufacturing Processes, Vol. 27, Issue 12, 1300-1305(2012).

[45] P. Ghosh, Md. Mezbahul-Islam and M. Medraj,"Critical assessment and thermodynamic modeling of Mg–Zn, Mg–Sn, Sn–Zn and Mg–Sn–Zn system", CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 36, 28-43 (2012).

[44] F. Tarasi, M. Medraj, A. Dolatabadi, C. Moreau and J. Oberste-Berghaus,"High-Temperature Performance of Alumina-Zirconia Composite Coatings Containing Amorphous Phases", Journal of Advanced Functional Materials, Vol. 21, 4143-4151 (2011).

[43] F. Tarasi, M. Medraj, A. Dolatabadi, C. Moreau and J. Oberste-Berghaus, “Structural Considerations in Plasma Spraying of the Alumina-Zirconia Composite”, Journal of Surface and Coatings Technology, Vol. 205, 5437–5443 (2011).

[42] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “Amorphous and Crystalline Phase Formation during Suspension Plasma Spraying of the Alumina-Zirconia Composite”, Journal of the European Ceramic Society, Vol. 31, Issue 15, 2903–2913 (2011).

[41] H. Nasery, M. Pugh, and M. Medraj, “Novel Fabrication Process of AlN Ceramic Matrix Composites at Low Temperatures”, Journal of Science and Engineering of Composite Materials, Vol. 18, 117-125 (2011).

[40] Y.N. Zhang, D. Kevorkov, F. Bridier and M. Medraj, “Experimental investigation of the Ca-Mg-Zn system using diffusion couples and key alloys”, Journal of Science and Technology of Advanced Materials, Vol. 12, No. 8, rec.No. 025003 (2011).

[39] M.N. Khan, M. Aljarrah, J. Wood and M. Medraj, “The effect of cooling rate on thermophysical properties of magnesium alloys”, Journal of Materials Research, Vol. 26, No. 2, 974-982 (2011).

[38] Y.N. Zhang, D. Kevorkov, J. Li, E. Essadiqi and M. Medraj, “Determination of the solubility range and crystal structure of the Mg-rich ternary compound in the Ca-Mg-Zn system”, Intermetallics, Vol. 18, No. 12, 2402-2411 (2010).

[37] D. Kevorkov, M. Medraj, Jian Li, E. Essadiqi, and P. Chartrand, “The 400ºC isothermal section of the Mg-Al-Ca system”, Intermetallics, Vol. 18, Issue 8, 1498-1506 (2010).

[36] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “Phase Formation and Transformation in Alumina/YSZ Nanocomposite Coating Deposited by Suspension Plasma Spray Process”, Journal of Thermal Spray Technology, Vol. 19, Issue 4, 787-795 (2010).

[35] S. Wasiur-Rahman and M. Medraj, “Thermodynamic Description of the Al-Ca-Zn Ternary System”, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 33, Issue 3, 584-598 (2009).

[34] M. Asgar-Khan and M. Medraj, “Thermodynamic Description of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems Using the Modified Quasichemical Model for the Liquid Phases”, Materials Transactions, Vol. 50, Issue 5, 1113-1122 (2009).

[33] S. Wasiur-Rahman and M. Medraj, “Critical Assessment and Thermodynamic Modeling of the Binary Mg-Zn, Ca-Zn and Ternary Mg-Ca-Zn Systems”, Intermetallics, Vol. 17, Issue 10, 847-864 (2009).

[32] M. Aljarrah, M. Medraj, Jian Li and E. Essadiqi, “Phase Equilibria of the Constituent Ternaries of the Mg-Al-Ca-Sr System”, JOM, Vol. 61, Issue 5, 68-74 (2009) invited Paper.

[31] F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “Effective Parameters in Axial Injection Suspension Plasma Spray Process of Alumina-Zirconia Ceramics”, Journal of Thermal Spray Technology, Vol. 17, Issue 5-6, 685-691 (2008).

[30] Md. Mezbahul-Islam and M. Medraj, “A Critical Thermodynamic Assessment of the Mg-Ni, Ni-Y Binary and Mg-Ni-Y Ternary Systems”, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 33, Issue 3, 478-486, (2009).

[29] E. Baril, A. Mostafid, L.P. Lefebvre and M. Medraj, “Experimental Demonstration of Entrance/Exit Effects on the Permeability Measurements of Porous Materials”, Journal of Advanced Engineering Materials, Vol. 10, Issue 9, 889-894 (2008).

[28] H. Al-Kazzaz, X. Cao, M. Jahazi and M. Medraj, “Reliability of Laser Welding Process for ZE41A-T5 Magnesium Alloy Sand Castings”, Materials Transactions, Vol. 49, Issue 4, 774-781 (2008).

[27] Md. Mezbahul-Islam, D. Kevorkov and M. Medraj, “The Equilibrium Phase Diagram of the Magnesium-Copper-Yttrium System”, The Journal of Chemical Thermodynamics, Vol. 40, Issue 7, 1064-1076 (2008).

[26] H. Al-Kazzaz, M. Medraj, X. Cao and M. Jahazi, “Nd:YAGLaser Welding of Aerospace Grade ZE41A Magnesium Alloy: Modeling and Experimental Investigations”, Journal of Materials Chemistry and Physics, Vol. 109, Issue 1, 61-76 (2008).

[25] X. Cao, M. Jahazi, H. Al-Kazzaz and M. Medraj, “Modelling of Work Hardening Behaviour for Laser Welded Magnesium Alloy”, International Journal of Materials Research (formerly Zeitschrift fur Metallkunde), Vol. 99, Issue 2008/2, 216-221 (2008).

[24] M. Aljarrah and M. Medraj, “Thermodynamic Assessment of the Phase Equilibria in the Al-Ca-Sr System using the Modified Quasichemical Model”, Journal of Chemical Thermodynamics, Vol. 40, Issue 4, 724-734 (2008).

[23] M. Aljarrah and M. Medraj, “Thermodynamic Modeling of the Mg-Ca, Mg-Sr, Ca-Sr and Mg-Ca-Sr Systems using the Modified Quasichemical Model”, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 32, Issue 2, 240-251 (2008).

[22] M. Aljarrah, M.A. Parvez, E. Essadiqi and Jian Li and M. Medraj, “Microstructural Characterization of Mg-Al-Sr Alloys”, Journal of the Science and Technology of Advanced Materials, Vol. 8, Issue 4, 237-248 (2007).

[21] M.A. Arafin, M. Medraj, D.P. Turner and P. Bocher, "Mathematical Modeling and Experimental Investigations of Isothermal Solidification during Transient Liquid Phase Bonding of Inconel 625 and 718 Superalloys", Journal of Advanced Materials Research, Vols. 15-17, 882-887 (2007).

[20] M. Medraj, M.A. Parvez, E. Essadiqi and Jian Li, “New Phases in the Mg-Al-Sr System”, Journal of Materials Science Forum, Vols. 539-543, 1620-1625 (2007).

[19] A. Janz, J. Groebner, D. Mirkovic, M. Medraj, Jun Zhu, Y.A. Chang and R. Schmid-Fetzer, “Experimental study and thermodynamic calculation of Al-Mg-Sr phase equilibria”, Intermetallics, Vol. 15, Issue 4, 506-519 (2007).

[18] M.A. Arafin, M. Medraj, D. P. Turner and P. Bocher, “Transient Liquid Phase Bonding of Nickel Superalloys with BNi-2: Modeling and Experimental Investigations”, Journal of Materials Science and Engineering A, Vol. 447, Issues 1-2, 125-133 (2007).

[17] M. Aljarrah, M. Medraj, X. Wang, E. Essadiqi, G. Dénès and A. Muntasar, “Experimental Investigation of the Mg-Al-Ca System”, Journal of Alloys and Compounds, Vol. 438, Issue 1-2, 131-141 (2007).

[16] M. Medraj, E. Baril, V. Loya and L. P. Lefebvre, “The effect of microstructure on the permeability of metal foams”, Journal of Materials Science, Vol. 42, Issue 12, 4372-4383 (2007)

[15] M. Aljarrah, U. Aghaulor, and M. Medraj, “Thermodynamic Assessment of the Mg-Zn-Sr System”, Intermetallics, Vol. 15, Issue 2, 93-97 (2007).

[14] M.A. Arafin, M. Medraj, D. P. Turner and P. Bocher, “Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer”, Journal of Materials Chemistry and Physics, Vol. 106, Issue 1, 109-119 (2007).

[13] S. Al Shakhshir and M. Medraj, “Computational Thermodynamic Model for the Mg-Al-Y System”, Journal of Phase Equilibria and Diffusion, Vol. 27, Issue 3, 231-244 (2006).

[12] M. Medraj, R. Hammond, M.A. Parvez, R. A. L. Drew and W. T. Thompson, “High Temperature Neutron Diffraction Study of the Al2O3-Y2O3 System”, Journal of the European Ceramic Society, Vol. 26, Issue 16, 3515-3524 (2006).

[11] F. Islam, A. Thykadavil and M. Medraj, “A Computational thermodynamic Model of the Mg-Al-Ge System", Journal of Alloys and Compounds, Vol. 425, Issue 1-2, pp. 129-139 (2006).

[10] D. Uremovich, F. Islam and M. Medraj, “Thermodynamic Modeling of the Ca-Ni System", Journal of the Science and Technology of Advanced Materials, Vol. 7, Issue 1, 116-126 (2006).

[9] F. Islam and M. Medraj, “Thermodynamic Assessment of the Mg-Ni-Ca System", CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 29[4], 289-302 (2005).

[8] M.A. Parvez, M. Medraj, E. Essadiqi, A. Muntasar and G. Dénès, "Experimental Study of the Ternary Magnesium-Aluminum-Strontium System", Journal of Alloys and Compounds, Vol. 402, Issue1-2, 170-185 (2005).

[7] F. Islam and M. Medraj, “Thermodynamic Evaluation and Optimization of the Mg-Al-Ca System”, Journal of the Canadian Metallurgical Quarterly, Vol. 44, Issue 4, 523-535 (2005).

[6] T. Balakumar and M. Medraj, “Thermodynamic Modeling of the Mg-Al-Sb System", CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 29, Issue 1, 24–36 (2005).

[5] M. Medraj, W.T. Thompson and R.A.L. Drew, “Understanding AlN Sintering Through Computational Thermodynamics Combined with Experimental Investigation”. Journal of Materials Processing Technology, Vol. 161, Issue 3, 415-422 (2005).

[4] M. Medraj and R.A.L. Drew, “The Role of the Phase Equilibria in AlN-Al2O3-Y2O3 System on Understanding AlN Sintering”, Journal of Silicates Industriels, Vol. 69, Issue 5-6, 131-139 (2004).

[3] M. Medraj, R. Hammond, W.T. Thompson and R.A.L. Drew, “High Temperature Neutron Diffraction of AlN-Al2O3-Y2O3 System”, Journal of the American Ceramics Society, Vol. 86, Issue 4, 717-726 (2003).

[2] M. Medraj, R.A.L. Drew and W.T. Thompson, “Thermodynamic Modeling of the AlN-Al2O3-Y2O3 System”, Journal of the Canadian Metallurgical Quarterly, Vol. 42, Issue 4, 495-506 (2003).

[1] M. Medraj, R. Hammond, J. Root, W.T. Thompson and R.A.L. Drew, “The Equilibria in the AlN-Al2O3-Y2O3 Ternary System - Thermodynamics and Neutron Diffraction”, Journal of Applied Physics A - Materials Science and Processing, Vol. 74, Issue [s01], 1188-1191 (2002).

b) Publications in Refereed Conferences

37. Ahmad Mostafa, Mohamed Shahtout, Tariq Al Afeefi and Mamoun Medraj, "Conversion of Electric Arc Furnace Dust into Ceramics Using Thermodynamic Calculations and Experimental Work", The 8th International Conference on Advanced Materials Research (ICAMR2018), January 20-22/2018, Fukuoka, Japan. Published in: Key Engineering Materials (ISSN: 1662-9795), 2018, Vol. 765, pp 73-78.

36. Abdullahi K. Gujba, Lloyd Hackel, Mamoun Medraj, "Influence of laser peening on the water droplet erosion behaviour of gas turbine compressor blade material", 13th International Conference on Shot Peening, 417-422, Montreal, Canada, (September 18-21, 2017)

35. H. Kirols, M.S. Mahdipoor, D. Kevorkov and M. Medraj, "Water Droplet Impingement Erosion: Testing, Mechanisms and Improved Representation", 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), 3234-3235, 2016, Montreal, Canada, (August 21-26, 2016)

34. Y.I. Murthy, Y.N. Zhang and M. Medraj, “Experimental Determination of the Phase Equilibrium in the Mg-Ca-Y System”, Magnesium Technology Symposium, Conference of Metallurgists and Materials Science & Technology Conference, Montreal, Canada, (October 27-31, 2013).

33. Y.N. Zhang, X. Cao, P. Wanjara and M. Medraj, “Fiber Laser Deposition of Inconel 718 Using Powders”, Advanced Materials, Processes and Applications for Additive Manufacturing Symposium, Materials Science and Technology, 37-49, 2013, Montreal, Canada, (October 27-31, 2013).

32. A. Mostafa, D. Kevorkov, A. Gheribi, M. Medraj, The Mg-Mn-Nd System: Experimental Investigation Coupled with Thermodynamic Modeling, Proceeding of the 9th International Conference on Magnesium Alloys and their Applications (Mg2012), Vancouver 2012, 245-250.

31. M. Mezbahul-Islam and M. Medraj,“Thermodynamic modeling of the Mg-Cu-Ni ternary system using the modified quasichemical model” COM 2011, October 3-6, Montreal, Canada, Light metals, pp. 241-253.

30. M. Shamekh, M. Pugh, and M. Medraj, “"Fabrication and Reaction Mechanism of In-situ TiC and TiB2 Reinforced Mg Matrix Composites" Advanced Materials Research, Vol. 409, 215-220 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

29. A.S.H. Kabir, X. Cao, J. Gholipour Baradari, P. Wanjara, J. Cuddy and A. Birur and M. Medraj, “"Determination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V Alloy" Advanced Materials Research, Vol. 409, 859-864 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

28. S. Konica, Y.N. Zhang, D. Kevorkov and M. Medraj, “The Ca-rich corner of the Al-Ca-Zn system”, Advanced Materials Research, Vol. 409, 51-56 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

27. Y.N. Zhang, D. Kevorkov, F. Bridier and M. Medraj, “Morphological and Crystallographic Characterization of Ca-Mg-Zn Intermetallics in Ternary Diffusion Couples”, Advanced Materials Research, Vol. 409, 387-392 (2012), THERMEC, Quebec City, Quebec, Canada, (Augest 1-5, 2011). 

26. Mohammad Mezbahul-Islam, Elhachmi Essadiqi and Mamoun Medraj,"A Differential Scanning Calorimetric Study of the Mg-Cu-Y System" - Materials Science Forum, Vol. 706-709, 1215-1220, (2012). 

25. Mohammad Mezbahul-Islam, Dmytro Kevorkov, Elhachmi Essadiqi and Mamoun Medraj, "Ternary intermetallic compounds across the Mg-NiY line at 673 K" - Materials Science Forum, Vol. 706-709, 1134-1139, (2012). 

24. A.S.H. Kabir, X. Cao, M. Medraj, J. Cuddy and A. Birur, “Effect of Welding Speed and Defocusing Distance on the Quality of Laser Welded Ti-6Al-4V”, Proceedings of the Materials Science and Technology (MS&T) 2010, 2787-2797, Houston, USA, (October 17-21, 2010)

23. F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, “Phase Formation in Alumina/YSZ Nano-Composite Coating Deposited by Suspension Plasma Spray Process”, Thermal Spray 2009, 409-414, Las Vegas, NV, (May 4-7, 2009)

22. H. Nasery, M. Medraj and M.D. Pugh, “Processing and Characterization of AlN-MgO-MgAl2O4 Composites by Spontaneous Infiltration”, Proceedings of the 47th Conference of Metallurgists, COM 2008, Aerospace Materials and Manufacturing: Advances in Processing and Repair of Aerospace Materials, 389-399, Winnipeg, Manitoba, Canada, (August 24-27, 2008)

21. S. Wasiur-Rahman and M. Medraj, “Thermodynamic Model of the Mg-Ca-Zn System”, Proceedings of the Materials Science and Technology (MS&T) 2008, 1042-1053, Pittsburgh, USA, (October 5-9, 2008)

20. M. Asgar-Khan and M. Medraj, “Critical Evaluation and Thermodynamic Modeling of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems”, Proceedings of the Materials Science and Technology (MS&T) 2008, 1029-1041, Pittsburgh, USA, (October 5-9, 2008)

19. M. Mezbahul-Islam and M. Medraj, “Thermodynamic Evaluation of the Mg-Ni-Y Ternary System”, Proceedings of the Materials Science and Technology (MS&T) 2008, 1017-1028, Pittsburgh, USA, (October 5-9, 2008)

18. F. Tarasi, M. Medraj, A. Dolatabadi, J.O. Berghaus and C. Moreau, “Effective parameters in axial injection suspension plasma spray process of alumina-zirconia ceramics”, Proceedings of the International Thermal Spray Conference & Exposition (ITSC2008), tarasif1/1-tarasif1/6, Maastricht, Netherlands, (June 2-4, 2008)

17. A. Mostafid, M. Medraj, E. Baril and L.P. Lefebvre, “Determination of bulk and entrance contributions to the pressure drop in metallic foams”, Proceedings of the 5th Conference on Porous Metals and Metallic Foams (MetFoam 2007), Montreal, Canada, (September 5-7, 2007)

16. M. Aljarrah, M. Medraj, J. Li and E. Essadiqi, “Thermodynamic Modeling and Experimental Investigation of the Magnesium-Aluminum-Calcium-Strontium System”, Proceedings of the Light Metals Technology 2007, 53-57, Saint-Sauveur, Canada, (September 24-26, 2007)

15. M.A. Arafin, M. Medraj, D.P. Turner and P. Bocher, "Optimization of Process Variables during TLP Bonding of Nickel Superalloys", Proceedings of the 45th International Conference of Metallurgists, COM 2006, Aerospace Materials & Manufacturing: Emerging Materials, Processes, and Repair Techniques, 301-313, Montreal, Canada, (October 1-4, 2006)

14. H. Al-Kazzaz, M. Medraj, X. Cao, M. Xiao And M. Jahazi, “Effect of Laser Power and Joint Gap on Weld Quality of Aerospace Grade ZE41A-T5 Magnesium Alloy Using Nd:Yag Laser”, Proceedings of the 45th International Conference of Metallurgists, COM 2006, Magnesium Technology in the Global Age, 503-518, Montreal, Canada, (October 1-4, 2006)

13. M. Aljarrah, M.A. Parvez, X.Z. Wang, M. Medraj, E. Essadiqi And J. Li, “Mg-Al-(Sr, Ca) Systems - An Experimental Analysis”, Proceedings of the 45th International Conference of Metallurgists, COM 2006, Magnesium Technology in the Global Age, 701-712, Montreal, Canada, (October 1-4, 2006)

12. M. A. Arafin, M. Medraj, D. P. Turner and P. Bocher, “Thermodynamic modeling and experimental investigation of brazed joints used in aerospace industry”, Proceedings of the 3rd International Brazing and Soldering Conference, 189-196, San Antonio, Texas, USA, (April 24–26, 2006)

11. H. Al Kazzaz, M. Medraj, X. Cao, M. Jahazi and M. Xiao, "Effect of welding speed on Nd:YAG laser weldability of ZE41 A-T5 magnesium sand castings", COM 2005, Light Metals 2005, 137-149, Calgary, Canada, (August 21-25, 2005)

10. V. Loya, M. Medraj, E. Baril, L-P Lefebvre and M. Gauthier, "The permeability of metal foams and its dependence on microstructure", COM 2005, Light Metals 2005, 421-435, Calgary, Canada, (August 21-25, 2005)

9. M.A. Parvez, X. Wang, E. Essadiqi and M. Medraj, "Experimental Investigation of the Equlibria in Mg-Al-(Ca,Sr) Systems", 2005 TMS Annual Meeting - Magnesium Technology 2005, 179-184, San Francisco, California, USA (February 13-17, 2005).

8. F. Islam, M. Medraj, "Thermodynamic Modeling of Mg-Ca and Al-Ca Binary Systems", Proc. CSME Forum 2004, 921-929, London, Ontario, Canada (June 1-4, 2004).

7. M.A. Parvez, E. Essadiqi and M. Medraj, "Thermal Analytical Investigations of Ternary Mg-Al-Sr System by DSC", Proc. CSME Forum 2004, 829-838 London, Ontario, Canada (June 1-4, 2004).

6. P. Khayargoli, V. Loya, L-P Lefebvre and M. Medraj, "The Impact of Microstructure on the Permeability of Metal Foams", Proc. CSME Forum 2004, 220-228, London, Ontario, Canada (June 1-4, 2004).

5. X. Wang, M.A. Parvez, E. Essadiqi and M. Medraj, "A Differential Scanning Calorimeter Study of Mg-Al-Ca Ternary System", Proc. CSME Forum 2004, 819-828, London, Ontario, Canada (June 1-4, 2004).

4. M. Medraj, M. Entezarian and R.A.L. Drew, "Wettability of Al2O3-Y2O3 Compounds on Aluminum Nitride and Their Role in Sintering", Proc. Int. Conf. on the Science, Technology, and Applications of Sintering, 2nd, 307-312 (1999).

3. M. Medraj, M. Entezarian and R.A.L. Drew, “Investigation of the Wettability of Al2O3-Y2O3 Stoichiometric Compounds on AlN”, British Ceramic Proceeding, n. 60, 85-87 (1999).

2. M. Medraj and A. Kilani, "Effect of Shot Peening and Hard Chromium Plating on Fatigue Life of Stainless Steel 17-4PH", Proc. 5th Int. Conf. Production Engineering and Design for Development, (1998).

1. M. Medraj and A. Kilani, "Investigation of the Effect of Shot Peening Parameters on Peening Intensity", Proc. 5th Int. Symp. Adv. Mater., 744-749 (1997).

c) Miscellaneous

Retrieved from "http://users.encs.concordia.ca/~tmg/index.php?title=Publications"
Personal tools
Namespaces
Variants
Actions
Navigation
Group Navigation
Teaching
Intranet
Toolbox