Conceptual Reference Database for Building Envelope Research Prev
Next

What's New

From Feb-1-2012 to Dec-31-2012

Updates and changes:

(Back to What's New List)
  • Added references: 87
  • Added concepts: 0
  • Added essays: 0

References

  1. Shah, L. J. and Furbo, S., (2004), Vertical evacuated tubular-collectors utilizing solar radiation from all directions. (13-12-12)
  2. Kim, Y. and Seo, T., (2007), Thermal performances comparisons of the glass evacuated tube solar collectors with shapes of absorber tube. (13-12-12)
  3. Richardson, D. B., Vehicles, E., Approaches, t. e. g. r. m. and Impacts,, (2013), Electric vehicles and the electric grid: A review of modeling approaches, Impacts, and renewable energy integration. (13-12-12)
  4. Jelle, B. P. and Breivik, C., (2012), The path to the building integrated photovoltaics of tomorrow. (13-12-12)
  5. Chen, H., Shu, C., Chiang, C. and Lee, S., (2011), The Indoor Thermal Research of the HCRI-BIPV Smart Window. (13-12-12)
  6. Stamenic, L., Smiley, E. and Karim, K., (2004), Low light conditions modelling for building integrated photovoltaic (BIPV) systems. (13-12-12)
  7. Yin, H. M., Yang, D. J., Kelly, G. and Garant, J., (2013), Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings. (12-12-12)
  8. Shukla, R., Sumathy, K., Erickson, P. and Gong, J., (2013), Recent advances in the solar water heating systems: A review. (12-12-12)
  9. Peng, J., Lu, L. and Yang, H., (2013), Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems, 2013. (12-12-12)
  10. Degroot, M. W., Elowe, P. R., Wilbur, J., George, J. and Feist, R., (2009), High throughput methodology for evaluation of the moisture barrier performance of thin films for PV applications. (12-12-12)
  11. IRENA, (2012), Renewable energy technologies: cost analysis series, volume 1: power sector, solar photovoltaics. (10-12-12)
  12. Bazilian, M ., Ijeomaonyejix., Liebreich, M., Macgill, I., Chase, J., Shah, J., Gielen, D., Arent, D. and Landf, D., (2012), Reconsidering the Economics of Photovoltaic Power. (10-12-12)
  13. Barbose, G., Darghouth, N., Wiser, R. and Seel, J., (2011), Tracking the Sun IV: An Historical Summary of the Installed Cost of Photovoltaics in the United States from 1998 to 2010. (10-12-12)
  14. BIPM, (2011), Evaluation of measurement data 每 Supplement 2 to the "Guide to the expression of uncertainty in measurement" 每 Extension to any number of output quantities. (21-11-12)
  15. BIPM, (2008), Evaluation of measurement data 每 Supplement 1 to the "Guide to the expression of uncertainty in measurement" 每 Propagation of distributions using a Monte Carlo method. (21-11-12)
  16. BIPM, (2009), Evaluation of measurement data 每 An introduction to the "Guide to the expression of uncertainty in measurement" and related documents. (21-11-12)
  17. BIPM, (2008), Evaluation of measurement data 每 Guide to the expression of uncertainty in measurement. (21-11-12)
  18. Fabi, V., Andersen, R. V., Corgnati, S. and Olesen, B. W., (2012), Occupants' window opening behaviour: A literature review of factors influencing occupant behaviour and models. (10-10-12)
  19. Pietila, A., Beausoleil-morrison, I. and Newsham, G. R., (2012), Zero peak housing: Exploring the possibility of eliminating electrical draws from houses during periods of high demand on the electrical grid. (10-10-12)
  20. Langmans, J., Nicolai, J. L. a., Klein, R. and Roels, S., (2012), A quasi-steady state implementation of air convection in a transient heat and moisture building component model. (10-10-12)
  21. Chesn谷, L., Duforestel, T., Roux, J. and Rusaou?n, G., (2012), Energy saving and environmental resources potentials: Toward new methods of building design. (10-10-12)
  22. Zhang, H., Yoshino, H. and Hasegawa, K., (2012), Assessing the moisture buffering performance of hygroscopic material by using experimental method. (4-9-12)
  23. ANSI/ASHRAE, (2011), Standard 140-2011 -- Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (ANSI Approved) ASHRAE / 2011 / 272 pages. (31-8-12)
  24. Granqvist, C. G., (2007), Transparent conductors as solar energy materials: A panoramic review,. (29-8-12)
  25. Sartori, I., Napolitano, A. and Voss, K., (2012), Net zero energy buildings: A consistent definition framework. (29-8-12)
  26. Deuble, M. P. and Dear, R. J., (2012), Green occupants for green buildings: The missing link?. (29-8-12)
  27. Yeo, T. L., Sun, T. and Grattan, K. T. V., (2008), Fibre-optic sensor technologies for humidity and moisture measurement. (29-8-12)
  28. Gunerhan, H. and Hepbasli, A., (2007), Determination of the optimum tilt angle of solar collectors for building applications. (28-8-12)
  29. Kapsis, K., Tzempelikos, A., Athienitis, A. K. and Zmeureanu, R. G., (2010), Daylighting performance evaluation of a bottom-up motorized roller shade. (28-8-12)
  30. Robert, A., Kummert, M., (2012), Designing net-zero energy buildings for the future climate, not for the past. (28-8-12)
  31. Nik, V. M., Kalagasidis, A. S. and Kjellstrom, E., (2012), Assessment of hygrothermal performance and mould growth risk in ventilated attics in respect to possible climate changes in Sweden. (28-8-12)
  32. Chen, F., Wittkopf, S. K., Ng, P. K. and Du, H., (2012), Solar heat gain coefficient measurement of semi-transparent photovoltaic modules with indoor calorimetric hot box and solar simulator. (27-8-12)
  33. Parameshwaran, R., Kalaiselvam, S., Harikrishnan, S. and Elayaperumal, A., (2012), Sustainable thermal energy storage technologies for buildings: A review. (27-8-12)
  34. Kemery, B. P. and Beausoleil坼morrison, I., (2012), Optimal PV orientation and geographic dispersion: a study of 10 Canadian cities and 16 Ontario locations. (15-8-12)
  35. Dickson, A., (), Modelling Double-Skin Facades. (9-8-12)
  36. Kosorica, V., Wittkopfa, S. and Huanga, Y., (2011), Testing a design methodology for building integration of photovoltaics (PV) using a PV demonstration site in Singapore . (9-8-12)
  37. Roberts, B., Nanditha, D. M., Dissanayake, M. and Ku, P. -., (2012), Angular selective semi-transparent photovoltaics. (9-8-12)
  38. Zogou, O. and Stapountzis, H., (2011), Energy analysis of an improved concept of integrated PV panels in an office building in central Greece. (8-8-12)
  39. Qiu, Z., Chow, T., Li, P. C., Ren, J. and Wang, W., (2009), Performance evaluation of the photovoltaic double-skin facade. (8-8-12)
  40. Mei, D. I., Eicker, U. and Fux, V., (2003), Thermal modelling of a building with an integrated ventilated PV fa?ade. (8-8-12)
  41. Pacheco, R., Ord車?ez, J. and Mart赤nez, G., (2012), Energy efficient design of building: A review. (3-8-12)
  42. Monde, M., Kosaka, M. and Mitsutake, Y., (2010), Simple measurement of thermal diffusivity and thermal conductivity using inverse solution for one-dimensional heat conduction. (1-8-12)
  43. Tervola, P., (1989), A method to determine the thermal conductivity from measured temperature profiles. (1-8-12)
  44. Chang, C. -. and Chang, M., (2009), Inverse determination of thermal conductivity using semi-discretization method. (1-8-12)
  45. Zueco, J., Alhama, F. and Gonz芍lez-fern芍ndez, C. F., (2006), Inverse determination of temperature dependent thermal conductivity using network simulation method. (1-8-12)
  46. Chan, D. S. H., Phillips, J. R. and Phang, J. C. H., (1986), A comparative study of extraction methods for solar cell model parameters. (6-7-12)
  47. Hadjab, M., Berrah, S. and Abid, H., (2012), Neural Network for Modeling Solar Panel. (6-7-12)
  48. Jelle, P., Breivik, B. and R?kenes, C. D., (2012), Building integrated photovoltaic products: A state-of-the-art review and future research opportunities. (5-7-12)
  49. Quesada, G., Rousse, D., Dutil, Y., Badache, M. Halle, O., (2012), A comprehensive review of solar facades. Opaque solar facades. (5-7-12)
  50. Shameri, M. A., Alghoul, M. A., Sopian, K., Zain, M. F. M. and Elayeb, O., (2011), Perspectives of double skin facde systems in buildings and energy saving. (5-7-12)
  51. Yin, R., Xu, P. and Shen, P., (2012), Case study: Energy savings from solar window film in two commercial buildings in Shanghai. (5-7-12)
  52. Carrero, C., Ramirez, D., Rodriguez, J. and Platero, C. A., (2011), Accurate and fast convergence method for parameter estimation of PV generators based on three main points of the I-V curve. (29-6-12)
  53. Tang, H., Xue, S. and Fan, C., (2008), Differential evolution strategy for structural system identification. (29-6-12)
  54. Ishaque, K., Salam, Z., Taheri, H. and Shamsudin, A., (2011), A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model. (29-6-12)
  55. Yordanov, G. H., Midtg?rd, O. M. and Saetre, T. O., (2010), Two-diode model revisited: parameters extraction from semi-log plots of i-v data. (29-6-12)
  56. Ishaque, K. and Salam, Z., Yordanov, G. H., Midtg?rd, O. M. and Saetre, T. O., (2011), An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE). (29-6-12)
  57. Ishaque, K., Salam, Z. and Syafaruddin,, (2011), A comprehensive MATLAB Simulink PV system simulator with partial shading capability based on two-diode model. (29-6-12)
  58. Ishaque, K., Salam, Z., Taheri, H. and Syafaruddin,, (2011), Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model. (29-6-12)
  59. Rapone, G. and Saro, O., (2012), Optimisation of curtain wall fa蓷des for office buildings by means of PSO algorithm. (28-6-12)
  60. Azari-n, R. and Kim, Y., (2012), Comparative assessment of life cycle impacts of curtain wall mullions. (28-6-12)
  61. Gonz芍lez-longatt, F. M., (2005), Model of photovoltaic module in MatlabTM. (27-6-12)
  62. Harrison, S. J. and Bernier, M. A., (1984), A Reference heat source for solar collector thermal testing. (8-5-12)
  63. Jaramillo, O. A., Perez-Raago, C. A., Arancibia-bulnes, C. A. and Estrada, C. A., (2008), A flat-plate calorimeter for concentrated solar flux evaluation. (4-5-12)
  64. Jin, X., Li, S., Zhang, X., Qiu, T. and Cao, Y., (2008), Analysis of uncertainty and error for solar heat gain test facility. (4-5-12)
  65. Harrison, S. J. and Dubrous., (1990), Determination of Window Thermal Characteristics Using a Solar Simulator Based Test Method. (4-5-12)
  66. Esram, T. and Chapman, P. L., (2007), Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques. (18-4-12)
  67. Zang, H., Xu, Q. and Bian, H., (2012), Generation of typical solar radiation data for different climates of China. (17-4-12)
  68. Yick, J., Mukherjee, B. and Ghosal, D., (2008), Wireless sensor network survey. (4-4-12)
  69. Atzori, L., Iera, A. and Morabito, G., (2010), The Internet of Things: A survey. (4-4-12)
  70. Jose fernedez-seara, C. P., Dopazo, J. A., Fernandes, F. and Sousa, P. X. B., (2012), Experimental analysis of a direct expansion solar assisted heat pump with integral storage tank for domestic water heating under zero solar radiation conditions. (2-3-12)
  71. Solanki, S. C., Dubey, S. and Tiwari, A., (2009), Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors. (1-3-12)
  72. Blocken, B. and Carmeliet, J., (2012), A simplified numerical model for rainwater runoff on building facades: Possibilities and limitations. (1-3-12)
  73. Vats, K. and Tiwari, G. N., (2012), Performance evaluation of a building integrated semitransparent photovoltaic thermal system for roof and fa蓷de. (1-3-12)
  74. Ayhan, D. and Saglam, S., (2012), A technical review of building-mounted wind power systems and a sample simulation model. (1-3-12)
  75. Kaynakli, O., (2012), A review of the economical and optimum thermal insulation thickness for building applications. (1-3-12)
  76. Wong, I. L., Eames, P. C. and Perera, R. S., (2007), A review of transparent insulation systems and the evaluation of payback period for building applications. (1-3-12)
  77. Athienitis, A. K. and Ramadan, H., (1999), Numerical model of a building with transparent insulation. (1-3-12)
  78. Mardiana-idayu, A. and Riffat, S. B., (2012), Review on heat recovery technologies for building applications. (29-2-12)
  79. Davidsson, H., Perers, B. and Karlsson, B., (2012), System analysis of a multifunctional PV/T hybrid solar window. (21-2-12)
  80. Cellura, M., Gangi, A. and Orioli, A., (2012), A photographic method to estimate the shading effect of obstructions. (21-2-12)
  81. Granqvist, C. G., (2008), Oxide electrochromics: Why, how, and whither. (17-2-12)
  82. Granqvist, C. G., (2012), Oxide electrochromics: An introduction to devices and materials. (17-2-12)
  83. K邦lt邦r, S. and T邦rkeri, N., (2012), Assessment of long term solar reflectance performance of roof coverings measured in laboratory and in field. (15-2-12)
  84. Bessoudo, M., Tzempelikos, A., Athienitis, A. K. and Zmeureanu, R., (2010), Indoor thermal environmental conditions near glazed facades with shading devices ?Part I: Experiments and building thermal model. (15-2-12)
  85. Branker, K., Pathak, M. J. M. and Pearce, J. M., (2011), A review of solar photovoltaic levelized cost of electricity. (10-2-12)
  86. Panwar, N. L., Kaushik, S. C. and Kothari, S., (2011), Role of renewable energy sources in environmental protection: A review. (10-2-12)
  87. Pinel, P., Cruickshank, C. A., Beausoleil-morrison, I. and Wills, A., (2011), A review of available methods for seasonal storage of solar thermal energy in residential applications. (10-2-12)

Essay

  1. Solar Prices Much More Competitive than Typically Thought,: 10-12-12
  2. Research paper shines light on competitiveness of solar PV power: 10-12-12

Web Links

  • No new entry.

    • Concept

    1. No Entered.


    Back to What's New List

    CRDBER, at CBS, BCEE, ENCS, Concordia,