Conceptual Reference Database for Building Envelope Research Prev
Next

Performance of exterior envelopes of whole buildings VIII: integration of building envelopes

ASTM
2001
Proceeding for conference held December 2- 7, Sheraton Sand Key Resort Clearwater Beach, Florida


ASTM, (2001), "Performance of exterior envelopes of whole buildings VIII: integration of building envelopes", Proceeding for conference held December 2- 7, Sheraton Sand Key Resort Clearwater Beach, Florida.
Abstract:

A Proposed Test Procedure for Separating Exterior Envelope Air Leakage from Interior Partition Air Leakage Gary Proskiw, P.Eng.; Anil Parekh, P.Eng.

A Heat and Mass Transfer Correlation for Laminar and Turbulent Flow Across a Low-Slope Roof William A. Miller, Ph.D., P.E.; Jerald A. Atchley

The Thermal Performance of Painted and Unpainted Standing-Seam Metal Roofing Systems Exposed to Two Years of Weathering Scott A. Kriner; William A. Miller, Ph.D., P.E.; Andre O. Desjarlais, P.E.

Modeling of Hygrothermal Behavior of Two-Dimensional Concrete Structures Dariusz J. Gawin, D.Sc.; Bernhard A. Schrefler, D.Sc.

Monitoring Performance of EIFS Clad Dwellings Eric S. Auman; William F. Egan

Measured Infiltration Reduction in California Production Houses Using Housewrap Bruce A. Wilcox, P.E.; Theresa A. Weston, Ph.D.

Quality Assurance for Building Envelope Air Barrier Systems Kevin D. Knight; Bryan J. Boyle; Bert G. Phillips, P.Eng.

Measured Summer Values of heathing and Shingle Temperatures for Residential Attics and Cathedral Ceilings William B. Rose

The Development of an Alternative to Chapter 11 of the IRC 2000 for Use in Pennsylvania Eric F. P. Burnett, Ph.D., P.E.; Mark R. Fortney

Heat and Moisture Control Considerations with Steel Framin in Low-Rise Residential Construction Eric F. P. Burnett, Ph.D, P.Eng.; Robert Bombino

Laboratory Investigations of Weather Resistive Barriers Used with Cedar Siding Theresa A. Weston, Ph.D.; Tony D. Zatkulak; Jim Waggoner; Nimrit Kang

Thermal and Moisture Performance of a Sealed Cold-Roof System with a Vapor-Permeable Underlay Tuomo T. Ojanen

Moisture Content of Indoor Air and Structures in Buildings with Vapor-Permeable Envelopes Carey J. Simonson, Ph.D.; Mikael H. Salonvaara; Tuomo Ojanen

Partial Environmental Life-Cycle Inventory of Single-family Houses Martha G. VanGeem, P.E.; Medgar L. Marceau; John Gajda; Michael A. Nisbet

Effect of Solar Radiation Control on Energy Costs—A Radiation Control Fact Sheet for Low-Slope Roofs Thomas W. Petrie, Ph.D.; Jerald A. Atchley; Phillip W. Childs, Andr?O. Desjarlais

Comparison of Techniques for In Situ, Non-Damaging Measurement of Infrared Emittances of Low-Slope Roof Membranes Phillip W. Childs; Thomas W. Petrie, Ph.D.; Jerald A. Atchley

Taking the Vital Signs of a Building: Understanding Building Performance by Taking a Building’s Vital Signs Alison G. Kwok, Ph.D.; Walter T. Grondzik, P.E.

Evaluating the Thermal Performance of Active Envelopes Dirk Saelens; Hugo Hens, Ph.D.

Software Tools for Building Envelopes: EnergyPlus: New, Capable and Linked Drury B. Crawley; Curtis O. Pedersen; Michael J. Witte, Ph.D.; Linda K. Lawrie; Richard K. Strand, Ph.D.; Robert H. Henninger, P.E.; Frederick C. Winkelmann, Ph.D.; Richard J. Liesen, Ph.D.; Jason Glazer, P.E.; W.F. Buhl; Daniel E. Fisher, Ph.D., P.E.; Don B. Shirey

Adaptation of Rain-Screen Principles in Window-Wall Design Stéphane P. Hoffman, P.Eng.

Improving Information Technology to Maximize Fenestration Energy Efficiency Dariush K. Arasteh, P.E.; Robin D. Mitchell; Christian Kohler; Charlie Huizenga; Dragan C. Curcija, Ph.D.

The Recycled Building Project Mark Gorgolewski, Ph.D.

Evaluation of Solar Radiation Transmission Through Transparent Facades Rosana M.Caram, Ph.D.; Joaquim Pizzutti; Lucila C. Labaki, Ph.D.; Eduvaldo P. Sichieri, Ph.D.

Extending the Life Span of Concrete Buildings in Germany/Middle Europe Erich Cziesielski, Ph.D.

Convection in Loose-fill Attic Insulation—Simulations and Large-Scale Measurements Paula Wahlgren

A Precision Weighing System for Helping Assess the Hygrotherma Response of Full-scale Wall Assemblies Wahid Maref, Ph.D.; Michael A. Lacasse, Ph.D., P.E.; Nicholas Krouglicof, Ph.D., P.E.

Guidelines for Ventilating Attics and Cathedral Ceilings to Avoid Icings at Their Eaves Wayne N. Tobiasson, P.E.; James S. Buska; Alan R. Greatorex

Domestic Water Heater Attached to Facades of Tall Buildings Exposed to Solar Radiation Marcelo R. Errera, Ph.D.; Aloisio L. Schmid, Dr.-Ing.; Patricia B. Errera

Wall Moisture Problems in Seattle Andre O. Desjarlais; Achilles N. Karagiozis; Michael A. Ki-Kramer

Stochastic Building Envelope Modeling?The Influence of Material Properties Mikael Salonvaara; Achilles Karagiozis, Ph.D.; Andreas Holm, Ph.D.

WUFI-ORNL/IBP—A North American Hygrothermal Model Achilles Karagiozis, Ph.D.; Hartwig Künzel; Andreas Holm

Biological Growth on Stucco Hartwig M. Kuenzel, Dr-Ing.; Klaus Sedlbauer

Uncertainty Approaches for Hygrothermal Building Simulations?Drying of AAC in Hot and Humid Climates Andreas H. Holm; Hartwig M. Kuenzel; Jan Radon

Building Science Details for Architectural Precast Concrete Sandwich Panels William C. Brown, P.Eng.; David L. Scott; David G.J. Dechamplain, P.Eng.

Study of Parameters and Criteria Influencing the Choice of Glazing in Office Buildings in Belgium Magali Bodart; Andr?De Herde

Stucco-Clad Wall Drying Experiment Mark D. Lawton, P.Eng.; William C. Brown, P.Eng.; Andy M. Lang

The Role of the Building Envelope Professional in the Aftermath of Vancouver’s Leaky Condominium Crisis David G. Kayll, P.Eng.

Case Study: A Wisconsin High-Performance House Thomas Brown

The Influence of Low-Permeance Vapor Barriers on Roof and Wall Performance J.F. Straube, Ph.D.

Envelope and Internal Space Performance of Office Buildings in a Hot Climate Ali M. Al-Garny, Ph.D.; John A. Tinker, Ph.D., C.Eng.

Commissioning Twin Houses for Assessing the Performance of Energy-Conserving Technologies Michael C. Swinton, P.E.; Hussein Moussa; Roger J. Marchand

Assessing Heat Flow Patterns in Basement Walls with Exterior Insulation Michael C. Swinton, P.E.; Wahid Maref, Ph. D.; Mark Bomberg, Ph. D.; M. Kumar Kumaran, Ph. D.; Nicole Normandin

Practical Implications of the Elimination of Natural Attic Ventilation in Mixed Climates David L. Roodvoets

How a Building Heating Supply System Affects Energy Demand and Indoor Comfort Carl-Eric Hagentoft, Ph.D.; Peter Roots, Ph.D.

A Modeling Study of Ventilation in Manufactured Houses Andrew K. Persily, Ph.D.; Samuel R. Martin

Hygrothermal Performance of Masonry Cavity Walls with Very Low U-Factor: A Test House Evaluation Hugo S.L.C. Hens, Ph.D.; Arnold Janssens, Ph.D.; Wim Depraetere

Method to Determine Number and Size of Samples Taken from Zinc Roof to Analyze Pitting Corrosion Rongjin Zheng; Jan E. Carmeliet, Ph.D.; Hugo Hens, Ph.D.; Walter F. Bogaerts, Ph.D.

The Hygrothermal Performance of External Walls with Inside Insulation Horst Stopp, Ph.D.; Peter Strangeld, Ph.D.; Heiko Fechner; Peter Häupl, Ph.D.

Inverted Roofs with Reduced Heat Losses Due to a Water-Repellent Separating Layer Holger Merkel, Ph.D.

Environmental Boundary Conditions for Long-term Hygrothermal Calculations Reda Djebbar, Ph.D.; David van Reenen; Mavinkal K. Kumaran,Ph.D.

Moisture Migration through Exterior Envelopes in Brazil Nathan Mendes, Dr. Eng.; Roberto Lamberts, Ph.D.; Paulo Cesar Philippi, Dr. Ing.

Moisture Conditions in a Concrete Slab on Grade with Floor Heating Peter Roots, Ph.D.; Per I. Sandberg, Ph.D.

Building Failures and Successes in Hot and Humid Climates Joseph Lstiburek, Ph.D., P.Eng.; Jacques Rousseau, Ph.D.

Combined Heat, Air, and Moisture Transport in Loose-Filled Insulation ?Experiment and Simulation Katrin Riesner; Jinkai Wang; Carl-Eric Hagentoft, Ph.D.; Georg-Wilhelm Mainka P.E., Dr.-Ing.

Interior Moisture Design Loads for Residences Anton TenWolde; Iain S. Walker, Ph. D.

Microclimate: Field Measurements, Driving Rain Analyses Bijan Adl-Zarrabi, Ph.D.; Anneli B. Högberg, Lic. Eng.

Numerical and Experimental Investigation of Coupled Heat and Moisture Transport Problems John Grunewald, Dr.-Ing.; Rudolf Plagge, Dr.-Ing.; Peter Häupl, Dr.-Ing.

The Performance of Daylighting Systems Under Partly Cloudy Skies Paulo S. Scarazzato; Lucila C. Labaki; Rosana Caram; Irving M. Franco; Márcia P. Alucci; Eleonora S. Assis

Spatial and Temporal Distribution of Driving Rain on Buildings: Numerical Simulation and Experimental Verification Bert Blocken; Jan Carmeliet, Ph.D.

High-Performance Wood-Based Panels Substitute Breathable Membranes on External Wall Sheathings Helmut B.R. Marquardt, Dr. Ing.; Georg-W. Mainka, Dr. Ing., P.E.

Methods for the Assessment of Moisture Content of Envelope Assemblies Dominique Derome, Ph.D.; Anik Teasdale-St-Hilaire; Paul Fazio, Ph. D., P. Eng.

Moisture Performance of Leaky Exterior Walls With Added Insulation Guylaine Desmarais; Dominique Derome, Ph.D.; Paul Fazio, Ph.D.

Heat Recovery in Building Envelopes Max H. Sherman, Ph.D.; Iain S. Walker, Ph.D.

Experimental Investigation of the Hygrothermal Performance of Insulation Materials Kurt K. Hansen, Ph.D.; Carsten Rode, Ph.D.; Ernst J. de Place Hansen, Ph.D.; Tim Padfield, Ph.D.; Finn Kristiansen

Hybrid Ventilation Retrofit in a School Setting Åsa M. Wahlström, Ph.D.; John Rune Nielsen, Ph.D.

Optimal Design of Building Envelopes Claus Rudbeck, Ph.D.; Toke R. Nielsen; Svend Svendsen

Introduction of Environmental Quality Management Procedures in the Housing Sector of Latvia Andris Kreslins, Dr.-Ing.; Olita Belindzeva-Korkla

Model and Experiments for Hygrothermal Conditions of the Envelope and Indoor Air of Buildings Carsten Rode, Ph.D.; Karl Grau; Teruaki Mitamura

The Impact of Sorption History and Hysteresis on Moisture Pattern in a Wood-Framed Building Envelope Dominique Derome, Ph.D.

Multicriteria Interactive Tool to Sketch the Building Envelope During First Stages of Architectural Design Jean-Marie Hauglustaine, Ph.D.

A Building America Prototype Home Packed with HVAC Features Dianne M. Griffiths

Wooden Roof Structures with High Vapor Retarder, Low Vapor Retarder, and Moisture-Dependent Vapor Retarder Heiko Fechner; Peter Häupl, Dr.-Ing. habil.

The Influence of Design on Drying of Wood- Frame Walls Under Controlled Conditions Donald G. Hazleden; Paul I. Morris, Ph.D.

An Assessment of Interlaboratory Repeatability and Reproducibility in Fenestration Energy Ratings: 1999 and 2000 NFRC Interlaboratory Round Robin Tests Daniel J. Wise; Bipin V. Shah

Residential Commissioning to Assess Envelope and HVAC System Performance Craig P. Wray, P. Eng.; Max H. Sherman, Ph.D.

Adapting PERSIST for the Prevention of Water Accumulation in Residential Wood Frame Construction Peter D. Baker; Chris B. Makepeace

Conduction Z-transfer Function Coefficients for Common Composite Wall Assemblies Elisabeth Kossecka, Ph.D.; Jan Kosny

Energy-Efficient, Flood-Damage-Resistive Residential Envelope System Testing Robert L. Wendt; Heshmat H. Aglan, Ph.D., P.E.; Timothy Barrows, P.E.

Energy Benefits of Application of Massive Walls in Residential Buildings J. Kosny, Ph.D.; T. Petrie; D. Gawin; P. Childs; A. Desjarlais; J. Christian

Thermal Comfort Controller for HVAC Systems With Mechanical Ventilators Dipak J. Shah

Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems David A. Bowman, P.E.; Steven R. Thorsell

A Configurable Smart Facade Unit forOn-site Calibration and Control Optimization Tahar Messadi, Arch.D.; Godfried Augenbroe

Why We Need to Know More About Basement Moisture Marilou Cheple; Patrick H. Huelman

Effect of Initial Moisture Content and Type of Surface Finish Layers on the Energy Performance of a Residential House with Cellular Concrete Walls Dariusz J. Gawin, D.Sc.; Jan Kosny, Ph.D.

Sustainable Buildings for China Leon R. Glicksman; Qingyan Chen; Leslie Norford; Andrew Scott; Juintow Lin

Evaluation of Energy Code Trade-Offs Andrew S. Lau, P.E.; Mark R. Fortney; William P. Bahnfleth, Ph.D., P.E.; Eric F. P. Burnett, Ph.D., P.Eng.

Experimental Study of Temperature Distributions Across Two Curtain Wall Systems Hua Ge; Paul Fazio, Ph.D., P. Eng.; Jiwu Rao, Ph.D.


Related Resources:

This publication in whole or part might be found online. Check the sources on the related article below. Or use search engines on the web.

Related Concepts


Author Information and Other Publications Notes
ASTM
  1. ASTM C991-03 Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
  2. C1046-95, Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  3. C1060-90(1997)e1 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
  4. C1134-90(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
  5. C1155-95, Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
  6. C1193-00 Standard Guide for Use of Joint Sealants
  7. C1199-00 standard test method for measuring the steady-state thermal transmittance of fenestration systems using hot box methods
  8. C1363-97 standard test method for the thermal performance of building assemblies by means of a hot box apparatus
  9. C1498-01 standard test method for hygroscopic sorption isotherms of building materials
  10. C168-01 Standard Terminology Relating to Thermal Insulating Materials
  11. C177-85 Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus
  12. C209-98 standard test methods for cellulosic fiber insulating board
  13. C236-89, Standard test method for steady-state thermal performance of building assemblies by means of a guarded hot box
  14. C518-91, Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the heat flow meter apparatus
  15. C755-85 Standard practice for selection of vapor retarders for thermal insulation
  16. C976-90(1996)e1 standard test method for thermal performance of building assemblies by means of a calibrated hot box
  17. D1413-76 Standard method of testing wood preservatives by laboratory soil block culture
  18. D3273-00 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
  19. D3274-95 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
  20. D3679-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
  21. D4442-92(1997)e1 standard test methods for direct moisture content measurement of wood and wood-base materials
  22. D4444-92e1 standard test methods for use and calibration of hand-held moisture meters
  23. D4933-99 Standard guide for moisture conditioning of wood and wood-base materials
  24. D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
  25. E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
  26. E1186-98 Standard practices for air leakage site detection in building envelopes and air retarder systems
  27. E1258-88 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
  28. E1424-91, Standard test method for determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure and temperature differences across the specimen
  29. E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
  30. E1557-02 standard classification for building elements and related sitework-UNIFORMAT II
  31. E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
  32. E1677-95(2000) standard specification for an air retarder (AR) material or system for low-rise framed building walls
  33. E1700-95(1999), standard classification for serviceability of an office facility for structure and building envelope
  34. E1825-96 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
  35. E1825-96, standard guide for evaluation of exterior building wall materials, products, and systems
  36. E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
  37. E1827-96(2002) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
  38. E2099-00 standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems
  39. E2099-00, standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems
  40. E2128-01a Standard Guide for Evaluating Water Leakage of Building Walls
  41. E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings
  42. E283-04, standard test method for rate of air leakage through exterior windows, curtain walls and doors
  43. E29-04 standard practice for using significant digits in test data to determine conformance with specifications
  44. E330-02 standard test method for structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference
  45. E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
  46. E331-00, Standard test method for water penetration of exterior windows, curtain walls, and doors by uniform static air pressure difference
  47. E547-00: water penetration of exterior windows, curtain walls, and doors by cyclic static air pressure differential
  48. E631-93a(1998)e1 Standard Terminology of Building Constructions
  49. E632-82(1996) standard practice for developing accelerated tests to aid prediction of the service life of building components and materials
  50. E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
  51. E74-04 standard practice of calibration of force-measuring instruments for verifying the force indication of testing machines
  52. E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
  53. E773-01, Standard test method for accelerated weathering of sealed insulating glass units
  54. E779-03, ASTM Method for Determining Air Leakage Rates by Fan Pressurization Test
  55. E779-99 Standard test method for determining air leakage rate by fan pressurization
  56. E783-02 standard test method for field measurement of air leakage through installed exterior windows and doors
  57. E917-99 standard practice for measuring life-cycle costs of buildings and building systems
  58. E964-93(1998)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
  59. E96-93 Standard test methods for water-vapor transmission of materials
  60. F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  61. F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
  62. G84-89(1999)e1 standard practice for measurement of time-of-wetness on surfaces exposed to wetting conditions as in atmospheric corrosion testing
  63. Heat transmission measurements in thermal insulations
  64. Standard guide for statistical evaluation of indoor air quality models. ASTM D 5157-97  



CRDBER, at CBS, BCEE, ENCS, Concordia,