Conceptual Reference Database for
Building Envelope Research
Reference List by Author
|
Reference List by Concept
|
Concept Tree
|
Concept List by Reference
|
What's New
List of Reference by Author
||
A-F
G-M
N-S
T
|
U
|
V
|
W
|
X
|
Y
|
Z
||
Tabares-velasco, P. C.
Verification and validation of EnergyPlus phase change material model for opaque wall assemblies
Tachikawa, N.
(1-->3) beta-D-glucan as a quantitative serological marker for Pneumocystis carinii pneumonia
Tadeu, A.
Definition of two-dimensional condensation via BEM, using the Glaser method approach
Steady-state moisture diffusion in curved walls, in the absence of condensate flow, via the BEM: a practical Civil Engineering approach (Glaser method)
Taheri, H.
A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model
Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model
Taka, S.
Development of thermal-photovoltaic hybrid exterior wallboards incorporating PV cells in and their winter performances
Takahashi, M.
Development of photovoltaic modules integrated with a metal curtain wall
Takase, S.
Simulation software of the hygrothermal environment of buildings based on detailed thermodynamic models
Taleb, H. M.
The potential to exploit use of building-integrated photovoltaics in countries of the Gulf Cooperation Council
Talley, S. M.
The effects of weather on fungal abundance and richness among 25 communities in the Intermountain West
Talukdar, P.
An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data
Talukdara, P.
Effect of initial conditions, boundary conditions and thickness on the moisture buffering capacity of spruce plywood
Talukhaba, A.
The globalisation of the construction industry--a review
Tam, C. M.
Towards adoption of prefabrication in construction, Towards adoption of prefabrication in construction
Tam, V. W. Y.
Towards adoption of prefabrication in construction, Towards adoption of prefabrication in construction
Tamma, K. K.
Heat transfer-A review of 2003 literature
Heat transfer--A review of 2005 literature,
Tan, H.
The effect of reflective coatings on building surface temperatures, indoor environment and energy consumption--An experimental study
Tan, P. P.
Facade staining arising from design features
Tan, S. S.
Building maintainability--review of state of the art
Tan, X.
Automatic code compliance checking in designing building envelopes
Tanabe, S.
Statistical data analysis method for multi-zonal airflow measurement using multiple kinds of perfluorocarbon tracer gas
Tang, D.
Novel method for measuring water evaporation into still air
Tang, F.
Performance evaluations and applications of photovoltaic-thermal collectors and systems
Tang, H.
Differential evolution strategy for structural system identification
Tang, J.
andem colloidal quantum dot solar cells employing a graded recombination layer
Tang, R.
Comparative studies on the water evaporation rate from a wetted surface and that from a free water surface
Tang, W.
Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels
Soiling patterns on a tall limestone building: changes over 60 years
Tao, Y.
Two-dimensional air exfiltration and heat transfer through fiberglass insulation I -- numerical model and experimental facility
Tapper, R.
The development of a method to evaluate bioreceptivity of indoor mortar plastering to fungal growth
Tardiff, Y.
Assembly and Calibration of a Compact Temperature and Relative Humidity Sensor
Tarhanen, J.
Ergosterol content in various fungal species and biocontaminated building materials
Tariku, F.
Defining climate regions as a basis for specifying requirements for precipitation protection for walls
Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
Integrated analysis of whole building heat, air and moisture transfer
Report from Task 4 of MEWS Project - Environmental Conditions, Final Report
Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
Transient model for coupled heat, air and moisture transfer through multilayered porous media
Use of hygrothermal numerical modeling to identify optimal retrofit options for high-rise buildings
Tariq, S.
A decision support system for rehabilitation of sewer pipes
Tarlo, S. M.
Species indentification of airborne molds and its significance for the detection of indoor pollution
Taskinen, T.
Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
Skin-prick test findings in students from moisture- and mould-damaged schools: A 3-year follow-up study
Tassou, S. A.
Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an airport terminal building displacement conditioning system
Tatge, G. J.
Apparatus for studying transient heat and moisture transfer in fiberglass batt insulation
Taylor, B. J.
Dynamic insulation in multistorey buildings
The application of dynamic insulation in buildings
The building envelope as an air filter
Taylor, G.
The dispersion of matter in turbulent flow through a pipe
Taylor, N.
Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
Tchinda, R.
A study of coupled heat and mass transfer across a porous building component in intertropical conditions
Teasdale-st-hilaire, A.
Behavior of wall assemblies with different wood sheathings wetted by simulated rain penetration
Methodology and Application of Simulated Wind-Driven Rain Infiltration in Building Envelope Experimental Testing
Methods for the assessment of moisture content of envelope assemblies
Teekasap, S.
Investigation on thermal performance of glazed solar chimney walls
Teija, M.
Different methods to characterize moldy buildings
Teixeira, J. M. C.
Buildings envelope anomalies: A visual survey methodology
Teknomo, K.
An environmental assessment of wood and steel reinforced concrete housing construction
Tenhunen, O.
Double skin facades - structures and building physics
Tenpierik, M. J.
Vacuum insulation panels for building applications: A review and beyond
TenWolde, A.
A mathematical model for indoor humidity in homes during winter
Accuracy of wood resistance sensors for measurement of humidity
Air pressures in wood frame walls
Effect of cavity ventilation on moisture in walls and roofs
Interior moisture design loads for residences
Issues related to venting of attics and cathedral ceilings
Manufactured housing walls that provide satisfactory moisture performance in all climates
Moisture management in buildings
Moisture transfer through materials and systems in buildings
Performance of back-primed and factory-finished hardboard lap siding in southern florida
Ventilation, humidity, and condensation in manufactured houses during winter
Weather Data
Teodosiu, C.
Numerical prediction of indoor air humidity and its effect on indoor environment
Terho, E. O.
Home dampness, current allergic diseases, and respiratory infections among young adults
Terneus, K.
The determination of ergosterol in environmental samples: an interdisciplinary project involving techniques of analytical and organic chemistry
Terr, A.
Toxic mold: phantom risk vs science
Tervola, P.
A method to determine the thermal conductivity from measured temperature profiles
Terziev, N.
Testing and evaluation of natural durability of wood in above ground conditions in Europe -- an overview
Terzieva, S.
Effect of impact stress on microbial recovery on an agar surface
Tesar, J.
The New CMI (Czech Metrology Institute) Method of Metrological Ensure for Accurate Low Mass Flow
Teschke, K.
A field comparison of four samplers for enumerating fungal aerosols I. Sampling characteristics
Teshome, E. J.
Zonal Models for Indoor Air Flow - A Critical Review
Thalfeldt, M.
Facade design principles for nearly zero energy buildings in a cold climate
Tham, K. W.
Building envelope design using design prototypes
Thatcher, T. L.
A concentration rebound method for measuring particle penetration and deposition in the indoor environment
Factors affecting the concentration of outdoor particles indoors: Existing data and data needs
Thatchera, T. L.
Deposition, resuspension, and penetration of particles within a residence
The Finn Group
The Use of Infrared Thermal Imaging in Indoor Environmental Quality Investigations
The Norwegian State Housing Bank
Housing statistics
The Vancouver Sun
Study finds household moulds' contribution to illness uncertain
Th¨¦berge, P.
Fast Tracking of Construction Projects: Analysis and Assessment
Thekaekara, M. P.
Solar radiation measurement: Techniques and instrumentation
Thelandersson, S.
Critical conditions for onset of mould growth under varying climate conditions
Theories, S. E. P. O. G. B. R. O. C.
implementations and challenges
Thess, A.
Mean velocity profile in confined turbulent convection
Thevenard, D.
Performance monitoring of the Nunavut arctic college PV system: nine years of reliable electricity generation
Thiagarajan, S.
Distribution of various fungi reported on different indoor substrates
Thien, F.
Current indoor allergen levels of fungi and cats, but not house dust mites, influence allergy and asthma in adults with high dust mite exposure
Prevalence and residential determinants of fungi within homes in Melbourne, Australia
Thirugnanasambandam, M.
A review of solar thermal technologies
Thomas, C. L. P.
Sampling procedures for intrinsically valid volatile organic compound measurements
Viability testing and characterization of germination of fungal spores by automatic image analysis
Thomas, L.
The importance of statistical power analysis: an example from aAnimal bBehaviour
Thomas, W. C.
Water vapor permeability measurements of common building materials
Water vapor sorption measurements of common building materials
Thom¨¦e, V.
From finite differences to finite elements: A short history of numerical analysis of partial differential equations
Thompson, M.
Inlet sampling efficiency of bioaerosol samplers
Thormark, C.
The effect of material choice on the total energy need and recycling potential of a building
Thornburg, J.
Penetration of particles into buildings and associated physical factors. part I: model development and computer simulations
Thornton, B. A.
A computer analysis of the moisture performance of roof constructins in the U.S. DOE Moisture Control Handbook
Thorsell, S. R.
Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
Thorsell, T.
Integrated Methodology for Evaluation of Energy Performance of the Building Enclosures -- Part 1: Test Program Development
Integrated methodology for evaluation of energy performance of the building enclosures: part 3 ¡ª uncertainty in thermal measurem
Thrane, U.
Determination of fungal spore release from wet building materials
Production of mycotoxins on artificially and naturally infested building materials
Production of mycotoxins on artificially inoculated building materials
The release of fungal spores from water damaged building materials
Thrum, T. C.
Characterizing state-of-the-art solar panels - a new approach for large area testing
Development of a powerful vortex stabilized waterwall flash lamp for RTP applications
Thue, J. V.
Learning from experience -- An analysis of process induced building defects in Norway
Vacuum insulation panels for building applications: A review and beyond
Thuriaux, B.
Contribution of basic research to the Irish national innovation system
Tian, Y.
A review of solar collectors and thermal energy storage in solar thermal applications
Crystall Ball for Windows, users manual
Tichenor, B. A.
Gas-phase mass transfer model for predicting volatile organic compound (VOC) emission rates from indoor pollutant sources
Tien, H. C.
A numerical investigation of phase change effects in porous materials
Tiilikainen, A. S.
Pilot analysis of the immune response to fungal antigens in subjects working in humidity damaged houses
Tilkes, F.
Microbial air pollutants - methods for the detection and identification of endotoxins, mycotoxins and MVOC
Tiller, D. K.
Survey of Sustainable Building Design Practices in North America, Europe, and Asia
Tiller-jeffery, R.
CFD modeling and comparison with experimental residence time distributions in single and two phase porous flows
Time, B.
Capacity of rendering systems to resist rain penetration
Hygroscopic moisture transport in wood
Intercomparison on measurement of water vapour permeance
Moisture buffer value of building materials
Moisture Buffer Value of Materials in Buildings
Time, H.
Large-scale experimental wind-driven rain exposure investigations of building integrated photovoltaics
Timusk, J.
Air pressure and building envelopes
Ting, D. S.
Current utilization and future prospects of emerging renewable energy applications in Canada
Ting, R.
Evolution of curtain wall design against water infiltration
Functional Isolation Concept in Curtain Wall Design
Tirabassi, T.
Derivation of eddy diffusivities from an unsteady turbulence spectrum
Estimating eddy diffusivities coefficients from spectra of turbulence
Tittelein, P.
Interpretation of calorimetry experiments to characterise phase change materials
Tiwari, A.
Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors
Tiwari, G. N.
Building Integrated Photovoltaic Thermal Systems: For Sustainable Developments
Exergetic and enviroeconomic analysis of novel hybrid PVT array
Performance evaluation of a building integrated semitransparent photovoltaic thermal system for roof and façade
T'joen, C.
Evaluation of the different definitions of the convective mass transfer coefficient for water evaporation into air
Toas, M.
Results of the 1985 Round-Robin Test Series Using ASTM E 96-80
Tobiasson, W. N.
Moisture in the roofs of cold storage buildings
Tobin, R. S.
Significance of fungi in indoor air: report from a working group
Species indentification of airborne molds and its significance for the detection of indoor pollution
Todd, J. A.
Comparative assessment of environmental performance tools and the role of the Green Building Challenge
Todd, W. F.
Evaluation of eight bioaerosol samplers challenged with aerosols of free bacteria
Todorovic, M. S.
Tuning control of buildings glazing's transmittance dependence on the solar radiation wavelength to optimize daylighting and building's energy efficiency
Tofnan, J.
A transient method for measuring the water vapor diffusion in porous building materials
Toftum, J.
Air movement -- good or bad?
Toivola, M.
An approach to management of critical indoor air problems in school buildings
Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
Induction of Cytotoxicity and Production of Inflammatory Mediators in RAW264.7 Macrophages by Spores Grown on Six Different Plasterboards
Isolation and identification of Aspergillus fumigatus mycotoxins on growth medium and some building materials
Personal exposures and microenvironmental concentrations of particles and bioaerosols
Toman, J.
Determination of temperature- and moisture-dependent thermal conductivity by solving the inverse problem of heat conduction
Tommerup, H.
Energy savings in Danish residential building stock
Tompa, C.
Energy and environmental indicators related to construction of office buildings
Tonelli, A. M.
Assessment of the thermal emissivity value of building materials using an infrared thermovision technique emissometer
Infrared thermovision technique for the assessment of thermal transmittance value of opaque building elements on site
Tonuia, K.
Performance improvement of PV/T solar collectors with natural air flow operation
Tonyan, T.
Barrier EIFS clad walls: Results from a moisture engineering study
Water management in exterior wall claddings
Toole, T. M.
Uncertainty and home builders' adoption of technological innovations
Toratti, T.
Towards modelling of decay risk of wooden materials
Torcellini, P.
Assessment of the technical potential for achieving net zero-energy buildings in the commercial sector
Zero Energy Buildings: A Critical Look at the Definition
Tortorici, G.
Multifunctional bioinspired sol-gel coatings for architectural glasses
Tovey, E. R.
Differentiation of allergenic fungal spores by image analysis, with application to aerobiological counts
Townsend, W.
Association Between Reservoirs of Fungal Growth and Air Samples in Residential Structures.
Toyodab, H.
Weatherability of coated fabrics as roofing material in tropical environment
Trabelsi, A.
Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials
Tracy, J. M.
SIPs overcoming the elements
Trakumas, S.
Collection of bioaerosol particles by impaction: effect of fungal spore agglomeration and bounce
Release of lead-containing particles from a wall enclosure
Tranthim-fryer, D. J.
Headspace/solid-phase microextraction/gas chromatography-mass spectrometry: a screening technique for the recovery and identification of volatile organic compounds (VOC's) in postmortem blood and viscera samples
Traw, J.
Performance-based building regulation: current situation and future needs
Trechsel, H. R.
Manual on moisture control in buildings
Moisture analysis and condensation control in building envelopes
Water vapor transmission through building materials and system: mechanisms and measurement
Treitman, R. D.
Exposures to respirable, airborne penicillium from a contaminated ventilation system: Clinical, environmental epidemiological aspects
Treloar, G. J.
A complete model of embodied energy ¡®pathways' for residential buildings
A framework for implementing ISO 14000 in construction
Building materials selection: greenhouse strategies for built facilities
Using national input-output data for embodied energy analysis of individual residential buildings
Trenberth, K. E.
The human impact on climate
Trick, W. E.
Comparison of the rodac imprint method to selective enrichment broth for recovery of vancomycin-resistant enterococci and drug-resistant enterobacteriaceae from environmental surfaces
Tripanagnostopoulos, Y.
Performance improvement of PV/T solar collectors with natural air flow operation
Trischuk, K. J.
Review of factors affecting the durability of repointing mortars for older masonry
Trogisch, A.
"Humid Air" and cooled walls
Troke, D.
Photovoltaics for the North: Five Years of Breaking Down Barriers in the Northwest Territories
Trombe, A.
Surface temperature measurement of semi-transparent material by thermocouple in real site experimental approach and simulation
Trueman, C.
Building systems: energy standards
Trunov, M. G.
Collection of airborne spores by circular single-stage impactors with small jet-to-plate distance
Collection of bioaerosol particles by impaction: effect of fungal spore agglomeration and bounce
Release of lead-containing particles from a wall enclosure
Trusty, W.
A Business Case for Green Buildings in Canada
Building life cycle assessment: residential case study
Buildings as products: issues and challenges for LCA
Tsai, F. C.
Biodiversity and concentrations of airborne fungi in large US office buildings from the BASE study
Prevalence of culturable airborne fungi in 100 U.S. office buildings in the building assessment survey and evaluation (BASE) study
Tsai, S. M.
Comparative studies of collection efficiency of airborne fungal matter using Andersen single-stage sampler and Air-O-Cell cassettes
Measurements of airborne fungal and endotoxin levels in water-damaged buildings
Tsai, W.
An ultrasonic air temperature measurement system with self-correction function for humidity
Tsongas, G. A.
A computer analysis of the moisture performance of roof constructins in the U.S. DOE Moisture Control Handbook
A field study of indoor moisture problems and damage in new northwest homes
A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
Case Studies of Moisture Problems in Residences
Field observations and laboratory tests of water migration in walls with shiplap hardboard siding
Tri State homes: a case study of extensive decay in the walls of older manufactured homes with exterior vapor retarder
Tsubouchi, K. K.
Water vapor pressure in the still air layer adhering to perforated plastic plates
Ttirler, D.
Issues associated with the use of infrared thermography for experimental testing of insulated systems
Tucic-porretta, M.
Species indentification of airborne molds and its significance for the detection of indoor pollution
Tucker, S.
Automating building life cycle energy assesment
Tucker, W. G.
Penetration of ambient fine particles into the indoor environment
Tuckera, E. J. B.
Application of modified international wood preservative chemical testing standards for assessment of biocontrol treatments
Tuday, M.
Sampling and analysis of microbial volatile organic compounds (MVOCs)
Validation of a method for the sampling and analysis of microbial volatile organic compounds (MVOCs)
Tulla, K.
Moisture measurements in building materials with microwaves
Tully, D. F.
Wood durability issues on the long-term performance of wood in service
Tung, T. C.
A methodology to investigate the particulate penetration coefficient through building shell
Using large environmental chamber technique for gaseous contaminant removal equipment test
Tuomi, T.
Mycotoxins in crude building materials from water-damaged buildings
Tuomisto, J. T.
TCDD: a Challenge to Mechanistic Toxicology
Turaga, M.
Experimental Performance Evaluation of Multi-Row, Plate Finned-Tube, Direct Expansion Air Cooling and Dehumidifying Coils
Turcotte, D.
Performance monitoring of the Nunavut arctic college PV system: nine years of reliable electricity generation
T¨¹rkeri, N.
Assessment of long term solar reflectance performance of roof coverings measured in laboratory and in field
T¨¹rler, D.
Gas-filled panels: an update on applications in the building thermal envelope
Laboratory procedures for using infrared thermography to validate heat transfer models
Surface temperatures of insulated glazing units: infrared thermography laboratory measurements
Turner, W.
Inflammatory and cytotoxic responses in mouse lungs exposed to purified toxins from building isolated Penicillium brevicompactum
Turney, I.
Greenhouse gas emissions: the capital and revenue carbon costs of residential developments
Turpin, B. J.
Measuring and simulating particulate organics in the atmosphere: problems and prospects
Turrent, D.
A review of solar houses in Europe
Tuula, H.
Moisture observations and health
Tyagi, V. V.
PCM thermal storage in buildings: A state of art
Progress in solar PV technology: Research and achievement
Tzempelikos, A.
A methodology for simulation of daylight room illuminance distribution and light dimming for a room with a controlled shading device
Daylighting performance evaluation of a bottom-up motorized roller shade
Indoor thermal environmental conditions near glazed facades with shading devices ?Part I: Experiments and building thermal model
Simulation of fa?ade and envelope design options for a new institutional building
The effect of reflective coatings on building surface temperatures, indoor environment and energy consumption--An experimental study
U.S Environmental Protection Agency
Healthy buildings, healthy people: a vision for the 21st century
Udagawa, M.
Building Simulation '99. Proceedings of the 6th International IBPSA Conference, (Editors)
Uddin, N.
Global buckling of composite structural insulated wall panels
UDI
Submission to the Second Commission of Inquiry into the Quality of Condominium Construction
Ugursal, V. I.
Modeling of end-use energy consumption in the residential sector: A review of modeling techniques
Uhde, E.
Diffusion studies of VOC mixtures in a building material
Uhlman, S.
Analysis of microbial contamination of a ventilation system detected by measurement of microbial volatile organic compounds
Uitti, J.
Increased prevalence of atopy among children exposed to mold in a school building
UK Green Building Council
Definition of Zero-Carbon Report
UKCIP/EPSRC
Workshop report: Climate change and the built environment research
Ulevicius, V.
Development and evaluation of aerosol generators for biological materials
Effect of impact stress on microbial recovery on an agar surface
Effect of relative humidity on the aerodynamic diameter and respiratory deposition of fungal spores
Techniques for dispersion of microorganisms into air
Ulgen, K.
An approach for energy modeling of a building integrated photovoltaic (BIPV) Trombe wall system
Ullal, H. S.
Solar photovoltaic electricity: Current status and future prospects
Ullett, J.
Barrier EIFS clad walls: Results from a moisture engineering study
Water management in exterior wall claddings
Ulooswyk, J. A.
Exterior insulated finish systems (EIFS) field performance evaluation, Air Quality Indices: A Review
Underwood, S. J.
Physical geography, climatology of wind-driven rain for the contiguous United States for the period 1971 to 1995
UNEP
Buildings and climate change: status, challenges and opportunities
Status of ratification/accession/acceptance/approval of the agreements on the protection of the stratospheric ozone layer
The Montreal Protocol on Substances that Deplete the Ozone Layer as adjusted and/or amended in in London 1990, Copenhagen 1992, Vienna 1995, Montreal 1997, Beijing 1999
UNEP, U.
Children in the new millennium: environmental impact on health
UNEP/GRID-Arenda
Vital climate graphics
UNFCCC
Report of the global environment facility to the conference, note by the secretariat
UNITEC Institute of Technology
Auckland house cladding survey
University, C.E.S.-.C.
Biodeterioration of wood in houses
¨¹nver, R.
Prediction of building envelope performance in the design stage: an application for office buildings
Upadhyaya, H. M.
Solar photovoltaic electricity: Current status and future prospects
Upton, S. L.
Development of sampling methods for the assessment of indoor bioaerosols
Urban Arts Architecture
Expanding market demand for Canadian wood products-a strategic initiative for the Canadian Wood Council
Urbanetz, J.
Compromises between form and function in grid-connected, building-integrated photovoltaics (BIPV) at low-latitude sites,
US Department of Energy
Annual Energy Review 2009
USAF
AF Passive Solar Handbook, Volume I: Introduction to Passive Solar Concepts
Usher, E.
The use of photovoltaics in a northern climate
Uvslokk, S.
Vacuum insulation panels for building applications: A review and beyond
Uvsl?kk, S.
Intercomparison on measurement of water vapour permeance
Vaes, W. H. J.
Identification of volatile metabolites from five fungal species cultivated on two media
Vafai, K.
A numerical investigation of phase change effects in porous materials
Vahteristo, M.
Analysis of moisture findings in the interior spaces of Finnish housing stock
Characteristics of moisture damage in houses and their association with self-reported symptoms of the occupants
Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
Moisture, mold and health in apartment homes
Temporal and spatial variation of fungal concentrations in indoor air
Vaivars, G.
Recent advances in electrochromics for smart windows applications
Vajaa, D.
Propagation of uncertainty: Expressions of second and third order uncertainty with third and fourth moments
Valbj?rn, O.
Lung function and symptoms in damp and mouldy buildings
Moulds and health - an epidemiological study
Valen, M. S.
Moisture transfer in organic coatings on porous materials--the influence of varying environmental conditions
Valkealahti, S.
Power Losses in Long String and Parallel-Connected Short Strings of Series-Connected Silicon-Based Photovoltaic Modules Due to P
Valley, M.
Validation of a method for the sampling and analysis of microbial volatile organic compounds (MVOCs)
Vamnechelen, E.
Pitched roofs, heat-air-moisture transport in tiled and slated roofs with the thermal insulation at rafter level
Van_Belleghem, M. V.
Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage
van_Braak, N. J.
Wind-induced airflow through permeable materials, Part II: air infiltration in enclosures
van_Decker, G. W. E. V.
Heat-exchange relations for unglazed transpired solar collectors with circular holes on a square or triangular pitch,
van_Mier, J. G. M.
Field evidences and theoretical analysis of the gravity-driven wetting front instability of water runoffs on concrete structure
van_Sark, W.
Luminescent solar concentrators - A review of recent results
van_Schijndel, A. W. M.
Application of HAMLab for Whole building HAM response modeling
Integrated heat air and moisture modeling and simulation
The effect of micro air movement on the heat and moisture characteristics of building constructions.
van_Schijndel, J.
Guidelines for heat and moisture modelling in constructions using multiphysics FEM software
van_Wonderen, S.
Experimental Determination of Fenestration Solar Heat Gain Coefficient
van-Brecht, A.
Influence of sampling positions on accuracy of tracer gas measurements in ventilated spaces
Van-Buggenhout, S.
Influence of sampling positions on accuracy of tracer gas measurements in ventilated spaces
Vance, C.
Economic impacts from the promotion of renewable energy technologies: The German experience
Vandersteen, K.
Modeling fluid flow in fractured media using continuum, network and discrete aproaches
Vanier, D. J.
A discrete stochastic model for performance prediction of roofing systems
Durability of Building Materials and Components 8
The Belcam Project: a summary of three years of research in service life prediction and information technology
van-Malcot, W.
Influence of sampling positions on accuracy of tracer gas measurements in ventilated spaces
Vanne, L.
Clean air solutions in food processing
Vanosdell, D. W.
Static chamber method for evaluating the ability of indoor materials to support microbial growth
Vasic, A.
Failure mechanisms in wood-based materials: A review of discrete, continuum, and hybrid finite-element representations
Vats, K.
Performance evaluation of a building integrated semitransparent photovoltaic thermal system for roof and façade
Vavilov, V.
Quantitative infrared thermography in buildings
Vazquez, M. E.
Applicability of infrared thermography to the study of the behaviour of stone panels as building envelopes
Veen, B. V. D.
The role of leaders' paradigm in construction industry change
Veerm?e, I.
Spatial distribution of air temperature as a measure of ventilation efficiency in large uninsulated cowshed
Vehicles, E.
Electric vehicles and the electric grid: A review of modeling approaches, Impacts, and renewable energy integration
Veiga, J. M. C.
Uncertainty analysis of structural systems by perturbation techniques
Veiseh, S.
Determination of the air/fiber conductivity of mineral wool insulations in building applications using nonlinear estimation meth
Veitch, J. A.
Occupant preferences and satisfaction with the luminous environment and control systems in daylit offices: a literature review
Veneri, P. D.
Thin film silicon photovoltaics: Architectural perspectives and technological issues
Venkatarama-Reddy, B. V.
Embodied energy of common and alternative building materials and technologies
Venp??, K.
Pilot analysis of the immune response to fungal antigens in subjects working in humidity damaged houses
Vepsalainen, A.
Fungi and actinobacteria in moisture-damaged building materials - concentrations and diversity
Veps?l?inen, A.
Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
Vepselainen, A.
Moisture damage in schools - symptoms and indoor air microbes
Vera, S.
Evaluation of radiance's genBSDF capability to assess solar bidirectional properties of complex fenestration systems
Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study
Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test-hut: Part 2- CFD study
Verbovena, P.
CFD model of the airflow, heat and mass transfer in cool stores
Verbunt, P. P. C.
Progress in Luminescent Solar Concentrator Research: Solar Energy for the Built Environment
Vereecken, E.
In situ determination of the moisture buffer potential of room enclosures
Review of mould prediction models and their influence on mould risk evaluation
Vergragt, J.
Bounded socio-technical experiments as agents of systemic change: The case of a zero-energy residential building,
Vergragt, P. J.
Bounded socio-technical experiments as agents of systemic change: The case of a zero-energy residential building
Verhoeff, A. P.
Health risk assessment of fungi in home environments
Verhoeff, R.
Fungal extracellular polysaccharides in house dust as a marker for exposure to fungi: Relations with culturable fungi, reported home dampness, and respiratory symptoms
Verma, V. V.
Thermal characteristics of glazing and shading materials
Vesterlokke, M.
Moisture conditions of non-ventilated, wood-based, membrane-roof components
Veszelei, M.
Recent advances in electrochromics for smart windows applications
Vette, A. F.
Characterization of indoor-outdoor aerosol concentration relationships during the Fresno PM exposure studies
vetter, W.
Adverse health effects of indoor molds
Vice, S. J.
Indicators of mold growth in indoor environments
Vicente-Tavera, S.
Different degrees of stone decay on the inner and outer walls of a Cloister
Viel, G. C.
Development of a powerful vortex stabilized waterwall flash lamp for RTP applications
Vigni, V.
Reconfigurable electrical interconnection strategies for photovoltaic arrays: A review
Vigotti, R.
International energy agency photovoltaic power systems implementing agreement
Viitanen, H.
Factors affecting mould growth on kiln dried wood
Factors affecting the development of mould and decay in wooden material and wooden structures
Modeling mould growth and decay damages
Moisture and bio-deterioration risk of building materials and structuresL?hdesm?ki
Mould and blue stain on heat treated wood
Mould growth on wood at fluctuating humidity conditions, energy efficiency and energy conservation: policies, programmes and their effectiveness
The response of building materials to the mould exposure at different response conditions
Towards modelling of decay risk of wooden materials
Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
Viitaniemi, P.
A critical review of building environmental assessment tools
Mould and blue stain on heat treated wood
Vik, T. A.
Determination of hygric material properties and calculation of the moisture balance of wooden prisms
Viljanen, M.
Diffusion of some MVOCs through building moisture barriers
Double skin facades - structures and building physics
On controlling indoor thermal and moisture content for an occupied building
Villegas, G. R.
Airborne fungi monitoring in Santiago, Chile
Vinha, J.
Drying of timber-framed wall structures
Estonian climate analysis for selecting moisture reference years for hygrothermal calculations
Hygrothermal calculations and laboratory tests on timber-framed wall structures
Indoor humidity loads and moisture production in lightweight timber-frame detached houses
Moisture and bio-deterioration risk of building materials and structuresL?hdesm?ki
Moisture behavior of timber-framed external wall structures in Nordic climate
Moisture transport in timber-framed external wall structures in Nordic climate - laboratory tests
Principles to analyze the moisture performance of timber-framed external wall assembly due to diffusion
The effects of ventilation systems and building fabric on the stability of indoor temperature and humidity in Finnish detached houses
Water vapour transmission in wall structures due to diffusion and convection
Virgone, J.
Experimental assessment of a phase change material for wall building use
Modeling phase change materials behavior in building applications: Comments on material characterization and model validation
One dimensional benchmark based on PCM
Optimization of a phase change material wallboard for building use
Virtanen, Y.
A holistic approach to materials selection in component design
Visa, I.
Mathematical Optimization of Solar Thermal Collectors Efficiency Function Using MATLAB
Vittori, O.
Wetting, deterioration and visual features of stone surfaces in an urban area
Vittorino, F.
Humidity and development of mold on internal surfaces of building walls
Vlooswyk, J. A.
EIFS: Canadian Field Performance
Volker, E. J.
The determination of ergosterol in environmental samples: an interdisciplinary project involving techniques of analytical and organic chemistry
Volker, I.
The determination of ergosterol in environmental samples: an interdisciplinary project involving techniques of analytical and organic chemistry
Voll, H.
Facade design principles for nearly zero energy buildings in a cold climate
Voorden, v. d.
Design analysis integration: supporting the selection of energy saving building components
Voordenb, v. d.
Voss, K.
Net zero energy buildings: A consistent definition framework
Zero Energy Building - A review of definitions and calculation methodologies
Vranken, E.
Influence of sampling positions on accuracy of tracer gas measurements in ventilated spaces
On-line airflow pattern measurement in ventilated buildings
Vreeker, R.
The assessment of sustainable urban development
Vries, D. A.
Moisture movement in porous materials under temperature gradient
The theory of heat and moisture transfer in porous media revisited
Vrijhoef, R.
The role of leaders' paradigm in construction industry change
Vrijmoed, L. L. P.
A comparison of airborne ergosterol, glucan and Air-O-Cell data in relation to physical assessments of mold damage and some other parameters
Vuolle, M.
Whole-building simulation with symbolic DAE equations and general purpose solvers
Vynnycky, M.
On the numerical solution of two-phase Stefan problems with heat-flux boundary conditions
W. R. MEADOWS, INC.
Controlling Moisture Movement in Buildings
Wadden, R.
Bioaerosol concentrations in the quad cities 1 year after the 1993 Mississippi river floods
Wads?, I.
A new method for determination of vapour sorption isotherms using a twin double microcalorimeter
Wadso, L.
Describing non-Fickian water-vapor sorption in wood
Studies of the degratation of building materials by isothermal microcalorimetry
Wads?, L.
A new method for determination of vapour sorption isotherms using a twin double microcalorimeter
On application of an isothermal sorption microcalorimeter
Wady, L.
Use of gas chromatography-mass spectrometry/solid phase microextraction for the identification of MVOCs from moldy building materials
Wagner, A.
A new diagram to evaluate the performance of building construction with a view to water vapor diffusion
Wahlgren, P.
Measurements and simulations of natural and forced convection in loose-fill attic insulation
Overview and literature survey of natural and forced convection in attic insulation
Wahlin, P.
Prediction of indoor concentration of 0.5--4 mm particles of outdoor origin in an uninhabited apartment
Wakili, K. G.
A humidity dependent vapour retarder in non-ventilated flat roofs. in situ measurements and numerical analysis
Driving potentials of heat and mass transport in porous building materials: a comparison between general linear, thermodynamic and micromechanical derivation schemes
Finite element analysis of temperature-induced deflection of vacuum glazing
Waldman, J. M.
Prevalence of culturable airborne fungi in 100 U.S. office buildings in the building assessment survey and evaluation (BASE) study
Waldum, A. M.
Capacity of rendering systems to resist rain penetration
W?linder, M.
Wetting phenomena on wood- factors influencing measurements of wood wettability
Walker, I. S.
Interior moisture design loads for residences
Long-Term field monitoring of an EIFS clad wall
Measuring and modeling vapor boundary layer growth during transient diffusion heat and moisture transfer in cellulose insulation
Walker, J. S.
A comparison of the power law to quadratic formulations for air infiltration calculations
Wall, D.
The relationship between symptoms and IgG and IgE antibodies in an office environment
Wallace, L.
Personal exposure to airborne particles and metals: Results from the particle team study in Riverside, California
Wallent¨¦n, P.
Heat flow in building components, experiment and analysis
Wallingford, K. M.
A procedure for evaluating the effectiveness of mold remediation
Wallis, M. H.
Experimental results for diffusion and infiltration of moisture in concrete masonry walls exposed to hot and humid climates
Wallner, G. M.
Application demonstration and performance of a cellulose triacetate polymer film based transparent insulation wall heating system
Walter, S. D.
Interval estimation and optimal design for the within-subject coefficient of variation for continuous and binary variables
Walters, E. H.
Current indoor allergen levels of fungi and cats, but not house dust mites, influence allergy and asthma in adults with high dust mite exposure
Prevalence and residential determinants of fungi within homes in Melbourne, Australia
Walters, M.
Airborne environmental endotoxin: a cross-validation of sampling and analysis techniques
Risk of sick leave associated with outdoor air supply rate, humidification, and occupant complaints
Walton, G. N.
A computer analysis of the moisture performance of roof constructins in the U.S. DOE Moisture Control Handbook
A mathematical analysis of moisture and heat transfer in the roof cavities of manufactured housing
Wan, G.
An airbone mold-derived product, -1,3-D-glucan, potentiates airway allergic responses
Wan, M. P.
Penetration coefficient and deposition rate as a function of particle size in non-smoking naturally ventilated residences
Wang, D.
A comparison study of some impulse-response identification methods
Wang, J. K.
A numerical method for calculating combined heat, air and moisture transport in building envelope components
A numerically stable algorithm for simplified calculations of combined heat, air and moisture transport
An algorithm to accelerate simulations of simulataneous heat and gas transfer in gas-filled foams
Combined Heat, Air, and Moisture Transport in Loose-Filled Insulation - Experiment and Simulation
Heat and mass transfer in built structures: Numerical analyses
Measurements of volatile organic compound (VOC) emissions from wood stains using an electronic balance
Wang, L.
Case study of zero energy house design in UK
Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for b
Wang, Q.
Evaluation of natural decay resistance of wood recovered from demolished buildings
Wood-based boards : response to attack by mould and stain fungi
Wang, R. Z.
Technical development of rotary desiccant dehumidification and air conditioning: A review
Wang, S.
Dynamic characteristics and energy performance of buildings using phase change materials: A review
Transfer function model and frequency domain validation of moisture sorption in air-conditioned buildings
Wang, W.
Performance evaluation of the photovoltaic double-skin facade
Wang, X.
andem colloidal quantum dot solar cells employing a graded recombination layer
Application of PCR and probe hybridization techniques in detection of airborne fungal spores in environmental samples
Benchmarking COMSOL 3.5a - CFD problem
Measurement of airflow patterns in ventilated spaces using particle image velocimetry
One dimensional benchmark based on PCM
Wang, Y.
Structural behavior and design of two custom aluminum extruded shapes in custom unitized curtain wall systems
Wang, Z.
Evaluation of a new personal sampler for enumerating airborne spores
Wanga, L.
Evaluation of some assumptions used in multizone airflow network models
Waqas, A.
Phase change material (PCM) storage for free cooling of buildings' review
Ward, I. C.
Tracer gas mixing with air
Wardell, C.
Through the roof
Wardhana, K.
Study of Recent Building Failures in the United States
Wards, D. J.
Reviewing the past to learn in the future: making sense of design errors and failures in construction
Wargocki, L. L.
Subjective perceptions, symptom intensity and performance: a comparison of two independent studies, both changing similarly the pollution load in an office
Wargocki, P.
Ventilation and health in non-industrial indoor environments: report from a European Multidisciplinary Scientific Consensus Meeting (EUROVEN)
Warnock, A. C. C.
Basics of Noise Control
Warren, P.
House dust mite allergen levels in two cities in Canada: effects of season, humidity, city and home characteristics
Indoor Air 99. The 8th International Conference on Indoor Air Quality and Climate. Volume 2
Warscheid, T.
Biodeterioration of stone: a review
Washington State Energy Code
Builder's field guide 5th edition
Watanabe, K.
Coupled heat and mass transfer in building materials
Watanabe, T.
Simulation software of the hygrothermal environment of buildings based on detailed thermodynamic models
Watling, H. R.
CFD modeling and comparison with experimental residence time distributions in single and two phase porous flows
Watson, M.
The development of an accurate tool to determine convective heat transfer coefficients in real buildings
Watson, R. T.
Climate change 2001: synthesis report
Watt, D.
Building Pathology: Principles and Practice
Watts, D. G.
Nonlinear regression analysis and its applications
WBCSD
Transforming the Market: Energy Efficiency in Buildings
Webber, J. B. W.
Characterising porous media
Weber, R. A.
Evaluation of moisture problems in exterior wall assemblies
Webster, D. R.
Turbulent diffusion
Webster, R.
The building envelope as an air filter
Weckstr?m, A.
Diffusion of some MVOCs through building moisture barriers
Survey of Energy Resources 2007
Weggel, D. C.
Properties and dynamic behavior of glass curtain walls with split screw spline mullions
Wegner, T. H.
Advancing cellulose-based nanotechnology
Nanotechnology applications in the forest products industry
Nanotechnology for forest products. Part 1
Wehner, B.
How do the indoor size distributions of airborne submicron and ultrafine particles in the absence of significant indoor sources depend on outdoor distributions?
Weinlader, H.
PCM-facade-panel for daylighting and room heating
Weiss, W.
Solar Heat Worldwide 2011
Weitzman, P.
International building physics toolbox, general report
Weitzmannb, P.
The International Building Physics Toolbox in Simulink
Wemhoff, P.
Mold, a poltergeist
Wemh?ner, C.
Simulation of solar thermal systems with CARNOT blockset in the environment MATLAB? simulink?
Wen, X.
An improved model of heat and moisture transfer with phase change and mobile condensates in fibrous insulation and comparison with experimental results
Modeling heat and moisture transfer through fibrous insulation with phase change and mobile condensates
Weng, C. I.
An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture
Applying object-oriented database technologies in concurrent design processes
Weng, Y.
Development of aerosol number samplers using foam filters
Wengert, E. M.
Drying hardwood lumber
Weschler, C. J.
The impact of sorption on perceived indoor air quality.
Wessen, B.
Microbial volatile organic compounds - What substances can be found in sick buildings?
Microbial volatile organic compounds-what substances can be found in sick buildings?
Wessen, S. K.
Microbial volatile organic compounds - What substances can be found in sick buildings?
Westberg, K.
Hygroscopic behavior of paper and books
Model to transform measured climatic data from a local level to a micro level: temperatures model to transform climatic data
On using available environmental data in service life estimations
Westermark, S.
Application of PCR and probe hybridization techniques in detection of airborne fungal spores in environmental samples
Wetzig, H.
Increased incidence of allergic sensitisation and respiratory diseases due to mould exposure: Results of the Leipzig Allergy Risk children Study (LARS)
White, C. M.
Pollen and fungal spore sampling and analysis. Statistical evaluations
White, I.
Exposure measures for studies of mold and dampness and respiratory health
White, J. H.
A toxic mold cleanup guide
Moisture transport in walls: Canadian experience
The influence of house characteristics in a Canadian community on microbiological contamination
White, N. A.
Development of model systems for investigations of the dry rot fungus Serpula lacrymans (Schumach. ex Fr.) Gray: Use for analysis of the environmental sensitivity of the organism
White, R.
Influence of facade geometry on weathering
Whitfield, C.
Penetration of ambient fine particles into the indoor environment
WHO
Children in the new millennium: environmental impact on health
Pollution-related diseases kill millions of children a year, alarming numbers part of new UN report released for child conference
Whong, W. Z.
Development of a fungus-specific PCR assay for detecting low-level fungi in an indoor environment
Wichmann, H. E.
Indoor exposure to molds and allergic sensitization
Indoor viable mold spores - a comparison between two cities, Erfurt (eastern Germany) and Hamburg (western Germany)
Wiedensohler, A.
How do the indoor size distributions of airborne submicron and ultrafine particles in the absence of significant indoor sources depend on outdoor distributions?
Wiener, R. W.
Transport of airborne particles within a room
Wiest, J.
Aerodynamic versus physical size of spores: measurement and implication for respiratory deposition
Wiggenhauser, H.
Moisture measurements in building materials with microwaves
Quantitative impulse-thermography as non-destructive testing method in civil engineering -- Experimental results and numerical simulations
Wijnands, F.
Fungal extracellular polysaccharides in house dust as a marker for exposure to fungi: Relations with culturable fungi, reported home dampness, and respiratory symptoms
Wikipedia
Aboriginal peoples in Canada
Wilbur, J.
High throughput methodology for evaluation of the moisture barrier performance of thin films for PV applications
Wilcox, T.
The relationship between symptoms and IgG and IgE antibodies in an office environment
Wilde, P.
Design analysis integration: supporting the selection of energy saving building components
Thermal Probe Technology for Buildings: Transition from Laboratory to Field Measurements
Wilhelm, M.
Quality test of the MicroSeq D2 LSU Fungal Sequencing Kit for the identification of fungi
Wilikins, K.
Microscopic fungi and their metabolites in dwellings - a bioassay study
Wilkins, C. K.
The release of fungal spores from water damaged building materials
Wilkins, F.
MVOC analysis for detection of microbial growth in buildings I. Variation of MVOC and mycotoxin patterns in aspergillus versicolor
Wilkins, K.
Determination of fungal spore release from wet building materials
Fungal spores from wet gypsum boards relationship between release and age of culture
Variation of volatile organic compound patterns of mold species from damp buildings
Volatile metabolite patterns for the identification of common indoor mold species
Volatile metabolites from indoor molds grown on media containing wood constituents
Volatile metabolites from mold growth on building materials and synthetic media
Willek, K.
Field Testing of New Aerosol Sampling Method With a Porous Curved Surface as Inlet
Willeke, K.
Aerosol characteristics of airborne actinomycetes and fungi
Bioaerosol collection by a new electrostatic precipitator
Characteristics of airborne actinomycete spores
Collection of airborne microorganisms by a new electrostatic precipitator
Collection of bioaerosol particles by impaction: effect of fungal spore agglomeration and bounce
Collection of fungal spores on air filters and spore reentrainment from filters into air
Development and evaluation of aerosol generators for biological materials
Effect of impact stress on microbial recovery on an agar surface
Effect of relative humidity on the aerodynamic diameter and respiratory deposition of fungal spores
Evaluation of a new personal sampler for enumerating airborne spores
Fungal fragments as indoor air biocontaminants
Improved aerosol collection by combined impaction and centrifugal motion
Inlet sampling efficiency of bioaerosol samplers
Long-term sampling of airbome bacteria and fungi into a non-evaporating liquid
Performance characteristics of the button personal inhalable aerosol sampler
Performance of Air-O-Cell, Burkard, and Button samplers for total enumeration of airborne spores
Performance of bioaerosol samplers: collection characteristics and sampler design considerations
Release of lead-containing particles from a wall enclosure
Release of Streptomyces albus propagules from contaminated surfaces
Source strength of fungal spore aerosolization from moldy building material
Techniques for dispersion of microorganisms into air
Williams, M.
Ventilation rates in schools
Williams, R. G.
Modelling The Performance Of Residential Building Envelope: The Role Of Sustainable Energy Performance Indicators
Williamson, T. J.
Multi-criteria assessment of building performance: theory and implementation
R-values for timber framed building elements
Willockx, A.
Benchmark experiments for moisture transfer modelling in air and porous materials
Wills, A.
A review of available methods for seasonal storage of solar thermal energy in residential applications
Wilson, C. B.
A review of experimental techniques for the investigation of natural ventilation in buildings
Wilson, D. J.
A comparison of the power law to quadratic formulations for air infiltration calculations
Wilson, S. C.
Detection of Airborne Stachybotrys chartarum Macrocyclic Trichothecene Mycotoxins in the Indoor Environment
Win, M. M.
Investigation on thermal performance of glazed solar chimney walls
Winandy, e.
Controlling moisture content of wood samples using a modified soil-pan decay method
Winandy, J. E.
Controlling wood moisture content during durability testing using the FPL soil pan decay technique
Limiting conditions for decay in wood systems
Predicting current serviceability and residual service life of plywood roof sheathing using kinetics-based models
Relationship between incipient decay, strength, and chemical composition of Douglas-fir heartwood
Thermal degradation of fire-retardant-treated plywood
Winkelmann, F. C.
EnergyPlus: creating a new-generation building energy simulation program
Winkelmannb, F.
Automatically generated zonal models for building air flow simulation: principles and applications
Winkler, S. L.
A simulation study of confounding in generalized linear models for air pollution epidemiology
Wirandia, J.
Uncertainty and traceable calibration - how modern measurement concepts improve product quality in process industry
Wirtanen, G.
Clean air solutions in food processing
Wiser, R.
Tracking the Sun IV: An Historical Summary of the Installed Cost of Photovoltaics in the United States from 1998 to 2010
Tracking the Sun: The Installed Cost of Photovoltaics in the U.S. from 1998--2007
Wit, S.
Analysis of uncertainty in building design evaluations and its implications
Withers, C. R.
Building cavities used as ducts: air leakage characteristics and impacts in light commercial buildings
Field measurement of uncontrolled airflow and depressurization in restaurants
Moisture problems in manufactured housing: probable causes and cures
Witriol, N. M.
Measurement of Return Leaks in Residential Buildings in North Louisiana
Witte, M. J.
EnergyPlus: creating a new-generation building energy simulation program
Witterseh, T.
Subjective perceptions, symptom intensity and performance: a comparison of two independent studies, both changing similarly the pollution load in an office
Wittkopf, S. K.
Solar heat gain coefficient measurement of semi-transparent photovoltaic modules with indoor calorimetric hot box and solar simulator
Wittkopfa, S.
Testing a design methodology for building integration of photovoltaics (PV) using a PV demonstration site in Singapore
WMO
WMO Annual report 2001
WMO statement on the status of the global climate in 2001
Wojtatowicz, T. W.
Contactless investigation of porous materials with the aid of He-Ne laser radiation
Wolfe, R. W.
Wind resistance of light-frame structures
Woloszyn, M.
eds. Annex 41 Final Report, Volume 1: Modelling Principles and Common Exercises
Investigation of Microclimate by CFD Modeling of Moisture Interactions between Air and Constructions
Modelling of hysteresis influence on mass transfer in building materials
Moisture propagation in multizone buildings proposition of a coupled energy-moisture-airflow model
The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings
Tools for performance simulation of heat, air and moisture conditions of whole buildings
Wolska, L.
Calibration procedure for solid phase microextraction - gas chromatographic analysis of organic vapours in air
On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
Wonder Makers Environmental Inc
Give me a number! post-remediation criteria for mold cleanup
Wong, I. L.
A review of transparent insulation systems and the evaluation of payback period for building applications
A review of transparent insulation systems and the evaluation of payback period for building applications
Wong, J.
Development of a conceptual model for the selection of intelligent building systems
Wong, N. H.
Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for b
Wong, P. W.
Semi-transparent PV: Thermal performance, power generation, daylight modelling and energy saving potential in a residential appl
Wong, W. C.
Correlation between the prevalence of certain fungi and sick building syndrome
Wong_Wang_Sie, W.
Analysis and design of curtain wall systems for high rise buildings
Woods, J. E.
A procedure for evaluating the effectiveness of mold remediation
Membrane processes for heating, ventilation, and air conditioning
Woods, T.
Reexamining roof ventilation
Woodsa, A. W.
Transient natural ventilation of a room with a distributed heat source
Worch, A.
The behaviour of vapour transfer on building material surfaces: the vapour transfer resistance
Workplace Safety and Health Division
Guidelines for the investigation, assessment, & remediation of mould in workplaces
Worrell, P.
Wood innovation in the residential construction sector; opportunities and constraints
Worthan, A. G.
Air- and dustborne mycoflora in houses free of water damage and fungal growth
MVOC emission patterns of indoor fungi: strain and culture differences
Worthan, T.
Microbial VOCs as indicators for mold growth in buildings
Wray, C. P.
Selecting Whole-House Ventilation Strategies To Meet Proposed Ashrae Standard 62.2: Energy Cost Considerations
Wright, A. V.
Isolation and identification of Aspergillus fumigatus mycotoxins on growth medium and some building materials
Wright, J. L.
Computer simulation of window condensation potential
Solar gain through windows with shading devices: simulation versus measurement
Write, J.
Thermal resistance of a window with an enclosed venetian blind: guarded heated plate measurements
WS Atkins Environment
Review of the methodologies for the extraction, detection and identification of microorganisms in the environment
WTO
Panel Report, Canada/Japan -- Tariff on imports of Spruce, Pine, Fir (SPF) dimension lumber, adopted 19 July 1989
Wu, H.
A simple apparatus for the evaluation of air infiltration through building envelope components
Wu, S.
A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation
Understanding the indoor environment through mining sensory data--A case study
Wu, Y.
Experimental study of hygrothermal properties for building materials
Influence of air space on multi-layered material water vapor permeability measurement
Moisture buffering capacities of five North American building materials
Wu, Z.
Application of PCR and probe hybridization techniques in detection of airborne fungal spores in environmental samples
Building-integrated photovoltaics (BIPV) in architectural design in China
Wub, B. X.
Characterization of flow field in a ventilated space and simulation of heat exchange between cows and their environment
WUFI
Moisture transport in building materials - computer simulation with the WUFI model
Wuillemin, D.
A Novel 50 kW 11,000 suns High-Flux Solar Simulator Based on an Array of Xenon Arc Lamps
Wullschleger, L.
Finite element analysis of temperature-induced deflection of vacuum glazing
Wurtz, E.
An integrated zonal model for predicting transient VOC distribution in a ventilated room
An integrated zonal model to predict transient indoor humidity distribution
Comparing zonal and CFD model predictions of indoor airflows under mixed convection conditions to experimental data
Comparing zonal and CFD model predictions of isothermal indoor airflows to experimental data
Effects of coupled heat and moisture transfers through walls upon indoor environment predictions
W¨¹rtz, H.
Determination of fungal spore release from wet building materials
Moulds and health - an epidemiological study
The release of fungal spores from water damaged building materials
Wurtzc, E.
Automatically generated zonal models for building air flow simulation: principles and applications
Wyon, D. P.
Subjective perceptions, symptom intensity and performance: a comparison of two independent studies, both changing similarly the pollution load in an office
Wyrwa, J.
Vapour condensation and moisture accumulation in porous building wall
Wysocki, D. C.
Insulation materials, testing, and applications
Xam¨¢n, J.
Thermal performance of reflective materials applied to exterior building components¡ªA review
Xiao, L.
A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation
Xiao, X.
Thermal conductivity measurements of a phase change material slurry under the influence of phase change
Xing, F.
Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels
Xu, J.
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologie
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies,
Xu, P.
Case study: Energy savings from solar window film in two commercial buildings in Shanghai
Xu, Q.
Generation of typical solar radiation data for different climates of China
Xu, W.
A zero-equation turbulence model for indoor airflow simulation
Xu, X.
Evaluation of an Active Building Envelope window-system
Xu, Y.
Numerical simulation of freezing and melting in porous materials under the consideration of the coupled heat and moisture transport
Xue, J.
Personal exposure to airborne particles and metals: Results from the particle team study in Riverside, California
Xue, S.
Differential evolution strategy for structural system identification
Xue, X.
Transparent thermal insulation coatings for energy efficient glass windows and curtain walls
Yacher, J. M.
In-depth survey report concentration of metalworking mists before and after installation of a commercial air cleaner at sauer-sundstrand company
Yacoub, S. M.
A methodology for architecture-level reliability risk analysis
Yadav, A. S.
Heat transfer and fluid flow analysis of solar air heater: A review of CFD approach
Solar radiation prediction using Artificial Neural Network techniques: A review
Tilt angle optimization to maximize incident solar radiation: A review
Yamamoto, A.
Morphological recognition of fungal spore germination by a computer-aided image analysis and its application to antifungal activity evaluation
Yamanaka, T.
Effects of gravel mulch on water vapor transfer above and below the soil surface
Yan, Q.
A simplified system for indoor airflow simulation
Yancey, C. W.
A summary of the structural performance of single-family, wood-frame housing
Yang, C. S.
Comparative studies of collection efficiency of airborne fungal matter using Andersen single-stage sampler and Air-O-Cell cassettes
Inflammatory and cytotoxic responses in mouse lungs exposed to purified toxins from building isolated Penicillium brevicompactum
Moisture storage and non-isothermal transport properties of common building materials
Yang, D. J.
Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings
Development of experimental procedure to evaluate potential movement of mold spores from wall cavity to indoor environment
Experimental evaluation of potential transport of mold spores from moldy studs in full-size wall assemblies
Sawmill evaluation of a bioprotectant against moulds, stain, and decay on green lumber
Yang, H.
Analysis of microbial contamination of a ventilation system detected by measurement of microbial volatile organic compounds
Impacts of the shading-type building-integrated photovoltaic claddings on electricity generation and cooling load component through shaded windows
Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer fa?ade,
Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems, 2013
Study on thermal performance of semi-transparent building-integrated photovoltaic glazings
Thermal behavior of a novel type see-through glazing system with integrated PV cells
Yang, J.
Cross-correlations between weather variables in Australia
Yang, L.
Simple correction methods of infrared thermography for building exterior surfaces
Yang, T.
A study of design options for a building integrated photovoltaic/thermal (BIPV/T) system with glazed air collector and multiple inlets
Yang, X.
A Mass transfer model for simulating volatile organic compound emissions from 'wet' coating materials applied to absorptive substrates
Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method
Yao, J.
An investigation into the impact of movable solar shades on energy, indoor thermal and visual comfort improvements
Yao, R.
A theoretical adaptive model of thermal comfort - Adaptive Predicted Mean Vote (aPMV)
Yarbrough, D.
Theoretical and experimental thermal performance analysis of complex thermal storage membrane containing bio-based phase-change
Yasuoka, A.
(1-->3) beta-D-glucan as a quantitative serological marker for Pneumocystis carinii pneumonia
Yatim, B.
Performance analysis of a double-pass photovoltaic/thermal (PV/T) solar collector with CPC and fins
Yendler, B.
Preliminary evaluation of soil moisture probe for use with Arcillite
Yeo, M. S.
Automated blind control to maximize the benefits of daylight in buildings
Yeo, T. L.
Fibre-optic sensor technologies for humidity and moisture measurement
Yeomans, D.
The origins of the modern curtain wall
Yeung, H.
Uncertainty estimation and Monte Carlo simulation method
Yeung, M.
House dust mite allergen levels in two cities in Canada: effects of season, humidity, city and home characteristics
Yi, H.
Effect of fluid flow and packing factor on energy performance of a wall-mounted hybrid photovoltaic/water-heating collector system
Yi, J.
Insulation plan of aluminum curtain wall-fastening unit for high-rise residential complex
Yianoulis, P.
An alternative approach for the energy and environmental rating of advanced glazing: An electrochromic window case study
Development of electrochromic evacuated advanced glazing
Energy performance assessment of an electrochromic window
Yick, J.
Wireless sensor network survey
Yilbas, B. S.
Development of a new moisture transfer (Bi--Re) correlation for food drying applications
Yilmaz, Z.
An approach for energy modeling of a building integrated photovoltaic (BIPV) Trombe wall system
Building form for cold climatic zones related to building envelope from heating energy conservation point of view
Yin, H. M.
Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings
Yin, R.
Case study: Energy savings from solar window film in two commercial buildings in Shanghai
Yingjie, Z.
Bending of uniformly loaded rectangular plates with two adjacent edges clamped, one edge simply supported and the other edge fre
Yli-pietila, K.
Ergosterol content in various fungal species and biocontaminated building materials
Yohanis, Y. G.
Enhancing the performance of building integrated photovoltaics
Solar radiation modelling for the simulation of photovoltaic systems
Yontz, R. R.
An overview of indoor air quality
Yoo, S.
Available remodeling simulation for a BIPV as a shading device
Simulation for an optimal application of BIPV through parameter variation
Yoon, J.
Power output analysis of transparent thin-film module in building integrated photovoltaic system (BIPV)
Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module
Yordanov, G. H.
An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE)
Two-diode model revisited: parameters extraction from semi-log plots of i-v data
Yorukoglu, M.
A critical review on the estimation of daily global solar radiation from sunshine duration
Yoshida, H.
Building Simulation '99. Proceedings of the 6th International IBPSA Conference, (Editors)
Yoshida, S.
Development of photovoltaic modules integrated with a metal curtain wall
Yoshino, H.
Assessing the moisture buffering performance of hygroscopic material by using experimental method
CFD prediction of surface condensation on walls and its experimental validation
Experimental and numerical study on indoor temperature and humidity with free water surface
Moisture buffering and effect of ventilation rate and volume rate of hygrothermal materials in a single room under steady state
Yoshino, M.
Development of photovoltaic modules integrated with a metal curtain wall
Young, J. C.
The use of ergosterol to measure exposure to fungal propagules in indoor air
Youngquist, J. A.
Literature review on use of nonwood plant fibers for building materials and panels
Yu, K.
Fungal contamination in public buildings: a guide to recognition and management
Yu, L.
Temperature dependence of the modulus of elasticity of industrial glasses
Yu, X.
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologie
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies,
Yule, B.
Quantitative spore colour measurement using colour image analysis
Y¨¹reklia, K.
Simulating climatic variables by using stochastic approach
Yver?s, V.
Performance indicators as a tool for decisions in the building process
Zain, M. F. M.
Perspectives of double skin facde systems in buildings and energy saving
Research and development on aspects of daylighting fundamentals
Zakowska, Z.
Elaboration and application of mathematical model for estimation of mould contamination of some building materials based on ergosterol content determination
Zalba, B.
An approach to the simulation of PCMs in building applications using TRNSYS
Review on thermal energy storage with phase change: materials, heat transfer analysis and applications
Zalewski, L.
A review on phase-change materials: Mathematical modeling and simulations
Experimental and numerical characterization of thermal bridges in prefabricated building walls
Interpretation of calorimetry experiments to characterise phase change materials
Modeling phase change materials behavior in building applications: Comments on material characterization and model validation
Zang, H.
Generation of typical solar radiation data for different climates of China
Zapata, B. J.
Properties and dynamic behavior of glass curtain walls with split screw spline mullions
Zarr, R. R.
Experimental verification of a moisture and heat transfer model in the hygroscopic regime
Heat and moisture transfer in wood-based wall construction: measured versus predicted
NIST/NRC-Canada interlaboratory comparison of guarded hot plate measurements: 1993-1997
Zavala-guill¨¦n, I.
Thermal performance of reflective materials applied to exterior building components¡ªA review
Zeghmati, B.
Investigation on thermal performance of glazed solar chimney walls
Zehnter, D.
Effect of Air Transport Through Mold Contaminated Ductwork.
Zeng, J.
A Mass transfer model for simulating volatile organic compound emissions from 'wet' coating materials applied to absorptive substrates
Zengc, S. X.
Towards adoption of prefabrication in construction, Towards adoption of prefabrication in construction
Zhai, Z.
Application of computational fluid dynamics in building design: aspects and trends
Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 1 -- summary o
Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic¨Cthermal col
Impact of determination of convective heat transfer on the coupled energy and CFD simulation for buildings
On approaches to couple energy simulation and computational fluid dynamics programs
Performance of coupled building energy and CFD simulations
Sensitivity analysis and application guides for integrated building energy and CFD simulation
Study of penetration of outdoor fine particles into nonresidential building with multizone simulation.
Zhaia, Z.
Zhang, G. Z.
Aldehyde emissions from particleboard and medium density fiberboard products
Zhang, H.
Assessing the moisture buffering performance of hygroscopic material by using experimental method
Transparent thermal insulation coatings for energy efficient glass windows and curtain walls
Zhang, J. S.
A Mass transfer model for simulating volatile organic compound emissions from 'wet' coating materials applied to absorptive substrates
Measurements of volatile organic compound (VOC) emissions from wood stains using an electronic balance
Weather-resistive barriers in stucco ladding systems
Zhang, K.
Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook
Zhang, M.
On the heat transfer rate reduction of structural insulated panels (SIPs) outfitted with phase change materials (PCMs)
Zhang, N.
A note on the evolution of directional distance function and its development in energy and environmental studies 1997?013
Zhang, P.
Thermal conductivity measurements of a phase change material slurry under the influence of phase change
Zhang, Q.
A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation
Zhang, R.
Transparent thermal insulation coatings for energy efficient glass windows and curtain walls
Zhang, S.
Solution-processed PbS quantum dot infrared photodetectors and photovoltaics
Zhang, T.
Transparent thermal insulation coatings for energy efficient glass windows and curtain walls
Zhang, W.
A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof
Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 1 -- summary o
Transparent thermal insulation coatings for energy efficient glass windows and curtain walls
Zhang, X.
Analysis of uncertainty and error for solar heat gain test facility
Modeling of Indoor Thermally Stratified Flows on the Basis of Eddy Viscosity/Diffusivity Model: State of the Art Review
Numerical determination of convection coefficients for internal surfaces in buildings dominated by thermally stratified flows
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologie
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies,
Spatial and temporal characteristics of heavy precipitation events over Canada
Zhang, Y. S.
An Overview of Room Air Motion Measurement: Technology and Application
An Overview of Room Air Motion Measurement: Technology and Application
Comparative experiment study on photovoltaic and thermal solar system under natural circulation of water
Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method
Mathematical solutions and numerical models employed for the investigations of PCMs' phase transformations
Measurement of airflow patterns in ventilated spaces using particle image velocimetry
Review of thermal energy storage technologies based on PCM application in buildings
Zhang, Z. H.
A framework for implementing ISO 14000 in construction
Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 1 -- summary o
Zhao, . N.
Numerical determination of convection coefficients for internal surfaces in buildings dominated by thermally stratified flows
Zhao, B.
A simplified system for indoor airflow simulation
Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method
Zhao, C. Y.
A review of solar collectors and thermal energy storage in solar thermal applications
The temperature dependence of effective thermal conductivity of open-celled steel alloy foams
Zhao, H.
An integrated zonal model to predict transient indoor humidity distribution
Zhao, J.
A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof
Modeling of Indoor Thermally Stratified Flows on the Basis of Eddy Viscosity/Diffusivity Model: State of the Art Review
Zhao, L.
Measurement of airflow patterns in ventilated spaces using particle image velocimetry
Zhao, R.
Investigation of transient thermal environments
Zhao, X.
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologie
Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies,
Zheng, C. w.
Assessment of the global ocean wind energy resource
Zhou, G.
Development of a fungus-specific PCR assay for detecting low-level fungi in an indoor environment
Zhou, L.
Optimization of ventilation system design and operation in office environment
Zhou, X.
Impact of dynamic airflow on human thermal response
Zhou, Y.
A combined approach of self-referencing and principle component thermography for transient, steady, and selective heating scenarios
Zhou, Z. Y.
Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook
Zhoua, G.
Air temperature fluctuations in rooms
Zhu, D.
A quantitative study for the measurement of driving rain exposure in the Montr¨¦al region
Approach for urban driving rain index by using climatological data recorded at suburban meteorological station
Quantitative driving rain exposure on a vertical wall at various Canadian cities
Quantitative studies driving rain exposure on a vertical building fa?ade in an urban area
Zhu, J.
Review of passive solar heating and cooling technologies
Zhu, L.
Comprehensive energy and economic analyses on a zero energy house versus a conventional house,
Zhu, Q.
Modeling and CFD prediction for diffusion and adsorption within room with various adsorption isotherms
Zhu, Y.
Impact of dynamic airflow on human thermal response
Study on dynamic characteristics of natural and mechanical wind in built environment using spectral analysis
Wavelet analysis on fluctuating characteristics of airflow in building environments
Zhu, Z. M.
Dynamic characteristics and energy performance of buildings using phase change materials: A review
Zia, P. A.
High-Performance Concretes A State-of-Art Report (1989-1994)
Ziemianski, L.
Application of neural networks for the structural health monitoring in curtain-wall systems
Zillig, W.
A new model for mould prediction and its application on a test roof
A new model for mould prediction and its application on dwellings with mould on the outer facades
Mold growth prediction by computational simulation
Zimmermann, D. S. G.
Development of a spray-drying technique for submerged spores of entomopathogenic fungi
Zimmermann, G.
Efficient creation of building performance simulators using automatic code generation
Zimmermann, M.
Benchmarks for sustainable construction - A contribution to develop a standard
Zinzi, .
Office worker preferences of electrochromic windows: a pilot study
Zirkelbach, D.
Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope
Zmeureanu, R.
A review of research activities in energy efficiency in buildings in Canada
Computer simulation of the effect of building thermal mass on the thermal loads
Daylighting performance evaluation of a bottom-up motorized roller shade
Indoor thermal environmental conditions near glazed facades with shading devices ?Part I: Experiments and building thermal model
Three-dimensional thermal and airflow (3D-TAF) model of a dome-covered house in Canada
Zmeureanua, R.
Analysis of thermograms for the estimation of dimensions of cracks in building envelope
Zmirou, D.
Air pollution exposure in European cities: The "EXPOLIS" study
Zock, J. P.
Housing characteristics, reported mold exposure, and asthma in the european community respiratory health survey
Zoeller, B.
Practical Residential Wall Systems: R-30 and beyond
Zogou, O.
Energy analysis of an improved concept of integrated PV panels in an office building in central Greece
Experimental validation of an improved concept of building integrated photovoltaic panels
Flow and heat transfer inside a PV/T collector for building application
Zombori, B. G.
Modeling the transient effects during the hot-pressing of wood-based composites
Zomer, C. D.
Compromises between form and function in grid-connected, building-integrated photovoltaics (BIPV) at low-latitude sites,
Zondag, H. A.
Flat-plate PV-Thermal collectors and systems: A review
Zueco, J.
Inverse determination of temperature dependent thermal conductivity using network simulation method
Zuidhof, A.
Personal sampling of particles in adults: Relation among personal, indoor, and outdoor air concentrations
Zupancic-kralj, L.
Solid-phase microextraction
Zuxin, Z.
Bending of uniformly loaded rectangular plates with two adjacent edges clamped, one edge simply supported and the other edge fre
Zwanenburg, H.
Adverse health effects in adults exposed to home dampness and molds
Zwayer, G. L.
EIFS: When It Works, When It Does Not
Leakage at interface between multiple fa?ade components
Zygmunt, B.
Application of solid-phase microextraction for determination of organic vapours in gaseous matrices
Application of solid-phase microextraction to monitoring indoor air quality
Calibration procedure for solid phase microextraction - gas chromatographic analysis of organic vapours in air
On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
Solid phase microextraction - A convenient tool for the determination of organic pollutants in environmental matrices
||
A-F
G-M
N-S
T
|
U
|
V
|
W
|
X
|
Y
|
Z
||
CRDBER
, at
CBS
,
BCEE
,
ENCS
,
Concordia
,
June 2014