- Nabhan, F.
- Nabinger, S. J.
- Nadarajah, A.
- Nafey, A. S.
- Nagano, K.
- Nagendra, S. M. S.
- NAHB Research Center & Building Works
- NAHB Research Center, Inc.
- Accelerating the Adoption of Vacuum Insulation Technology in Home Construction, Renovation, and Remodeling
- Assessing housing durability: a pilot study
- Building better homes at lower costs: the industry implementation plan for the residential national construction goals
- Commercialization of Innovation: Lessons Learned
- Comparative costs of alternative building systems in new residential construction
- Durability by design: a guide for residential builders and designers
- Moisture moisture protection protection of wood of wood sheathing
- Mold & moisture intrusion case study report
- Residential construction waste management demonstration and evaluation, assistance agreement number: CX 822813-1-0, Task 1 report
- Residential remodeling reports, Moisture Moisture Protection Protection of Wood of Wood Sheathing
- Review of structural materials and methods for home building in the United States: 1900-2000
- Technology Roadmap: Advanced Panelized Construction - 2003 Progress Report
- Water intrusion evaluation for caulkless siding, window, and door systems-laboratory testing results
- Wood used in new residential construction 1998 and 1995
- Nahora, H. B.
- Nakagawa, H. M.
- Nakahara, N.
- Nakashima, Y.
- Nakhi, A. E.
- Namiehik, J.
- Namienik, J.
- Namiesnik, J.
- Application of solid-phase microextraction to monitoring indoor air quality
- On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
- Passive sampling
- Solid phase microextraction - A convenient tool for the determination of organic pollutants in environmental matrices
- Nanditha, D. M.
- Napolitano, A.
- N?sman, ?.
- National Association of Home Builders
- National Research Council
- Navarro, M. E.
- Navon, U.
- Naylor, D.
- Nazarko, P.
- Nazaroff, W. W.
- Indoor particulate matter of outdoor origin: importance of size-dependent removal mechanisms
- Modeling particle penetration through cracks in building envelopes
- Modeling pollutant penetration across building envelopes
- Nonlinear least-squares minimization applied to tracer gas decay for determining airflow rates in a two-zone building
- Particle deposition from turbulent flow: review of published research and its applicability to ventilation ducts in commercial buildings
- Particle penetration through building cracks
- Particle penetration through windows
- NBC
- Neale, A.
- Nealley, M. L.
- Negraoc, C. O. R.
- Neila, F. J.
- Neises, W.
- Nelson, B. D.
- Nelson, P. E.
- Nelson, R.
- Nema, R. K.
- nergy Information Administration (EIA)
- Neto, F. R. D.
- Neue, J.
- Nevalainen, A.
- An approach to management of critical indoor air problems in school buildings
- Analysis of moisture findings in the interior spaces of Finnish housing stock
- Comparison of concentrations and size distributions of fungal spores in buildings with and without mould problems
- Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
- Control of exposure to airborne viable microorganisms during remediation of moldy buildings; report of three case studies
- Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
- Effect of growth medium on potential of Streptomyces anulatus spores to induce inflammatory responses and cytotoxicity in RAW264.7 macrophages
- Effect of indoor sources on fungal spore concentrations and size distributions
- Effect of liner and core materials of plasterboard on microbial growth, spore-induced inflammatory responses, and cytotoxicity in macrophages
- Everyday activities and variation of fungal spore concentrations in indoor air
- Fungal spores as such do not cause nasal inflammation in mold exposure
- Fungi and actinobacteria in moisture-damaged building materials - concentrations and diversity
- Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
- Induction of Cytotoxicity and Production of Inflammatory Mediators in RAW264.7 Macrophages by Spores Grown on Six Different Plasterboards
- Inlet sampling efficiency of bioaerosol samplers
- Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
- Microbes and moisture content of materials from damaged building
- Moisture, mold and health in apartment homes
- Performance of bioaerosol samplers: collection characteristics and sampler design considerations
- Personal exposures and microenvironmental concentrations of particles and bioaerosols
- Size distributions of airborne microbes in moisture-damaged and reference school buildings of two construction types
- Skin-prick test findings in students from moisture- and mould-damaged schools: A 3-year follow-up study
- Temporal and spatial variation of fungal concentrations in indoor air
- The relationship between moisture or mould observations in houses and the state of health of their occupants
- Validity of detection of microbial growth in buildings by trained dogs
- Nevalainen, T.
- Nevalainena, A.
- Nevelainen, A.
- New York City Department of Health
- Newell, S. Y.
- Newmana, A. J.
- Newport Partners LLC
- Newport Partners, LLC
- Newsham, G. R.
- Neymark, J. S.
- NFRC
- NFRC 100: Procedure for Determining Fenestration Product U-factors
- NFRC 200-2010[E0A0] Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence
- NFRC 300-2010 Test Method for Determining the Solar Optical Properties of Glazing Materials and Systems
- NFRC 400-2010[E0A0] Procedure for Determining Fenestration Product Air Leakage
- NFRC 500-2010 Procedure for Determining Fenestration Product Condensation Resistance Values
- NFRC Test procedure for measureing the steady-state thermal transmittance of fenestration system, revised 1997
- Ng, E. Y. K.
- Ng, K. C.
- Ng, P. K.
- Ng, W.
- Ngowi, A. B.
- Nguyen, H.
- Nicas, M.
- Nicholls, M.
- Nichum, E.
- Nicklin, J.
- Nicol, F.
- Nicol, J. F.
- Nicolai, J. L. a.
- Nicola?ˇ§a, B. M.
- Nicolajsen , A.
- Nicolajsen, A.
- Nicolas, J.
- Nielsen, A.
- 3D room models for moisture balance calculations
- Checklists for clean and moisture safe buildings
- Use of FMEA - failure modes effects analysis on moisture problems in buildings
- Use of statistics for prediction of risk for condensation in a wall construction cold walls radiation technique: the case of quality of air
- Nielsen, F.
- Nielsen, J.
- Nielsen, K. F.
- Determination of ergosterol on mouldy building materials using isotope dilution and gas chromatography--tandem mass spectrometry
- Determination of fungal spore release from wet building materials
- Growth of moulds on building materials under different humidities
- Microfungal contamination of damp buildings - examples of risk constructions and risk materials
- Mould growth on building materials: Secondary metabolites, mycotoxins and biomarkers
- Mycotoxin production by indoor molds
- Production of mycotoxins on artificially and naturally infested building materials
- Production of mycotoxins on artificially inoculated building materials
- The Danish Research Programme: "moulds in Buildings" 1998-2001
- The release of fungal spores from water damaged building materials
- Nielsen, M. V.
- Nielsen, O. J.
- Nielsen, P. A.
- Determination of fungal spore release from wet building materials
- Growth of moulds on building materials under different humidities
- Microfungal contamination of damp buildings - examples of risk constructions and risk materials
- Production of mycotoxins on artificially and naturally infested building materials
- Production of mycotoxins on artificially inoculated building materials
- Quality control of computational fluid dynamics in indoor environments
- The release of fungal spores from water damaged building materials
- Nielsen, T. R.
- Niemeier, R. T.
- Niemi, S.
- Nieminen, J.
- Nieminen, S. M.
- Nik, V. M.
- Niklasson, G. A.
- Nikolic, D.
- Nikolic, N.
- Nikulin, M.
- Nilsson, C. A.
- Nilsson, J.
- Nilsson, L.
- Coupled heat and moisture transfer in multi-layer building materials
- Experimental and theoretical investigation of non-isothermal transfer in hygroscopic building materials
- Nonisothermal moisture transport in hygroscopic building materials: modeling for the determination of moisture transport coefficients
- Nilssona, C.
- Nilssona, T.
- Nishioka, M. G.
- Nissen, A. T.
- Nisson, N.
- Niu, J.
- Njomo, D.
- Njomoa, D.
- Nkundabakura, P.
- No, S.
- Noble, J. A.
- Noce, M. D.
- Nodby, O. K.
- Noel, J.
- Nofal, M.
- A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
- Criteria for unacceptable damage on wood systems
- Criteria for unaccesseptable damage on wood systems
- Defining climate regions as a basis for specifying requirements for precipitation protection for walls
- Durability assessments of wood-frame construction using the concept of damage-functions
- On implementing experimental biological damage-functions models in durability assessment systems
- N?kleby, J. O.
- Nolard, N.
- Nolla, J. M. R.
- Nonaka, M.
- Nong, G.
- Norback, D.
- Norb?ck, D.
- Norberg, P.
- Nordtest
- Nor¨¦n, J.
- Norman, K. W.
- Normandin, N.
- Determination of equilibrium moisture content of building materials: some practical difficulties
- Effect of surface temperature on water absorption coefficient of building materials
- In-Situ performance evaluation of exterior insulation basement systems (EIBS) - spray polyurethane foam: summary report
- Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
- Norrby, C.
- Nortdtest
- Norton, B.
- Noskin, G. A.
- Notton, G.
- Noumowe, A. N.
- Novak, I.
- Nowak, M.
- NRC
- NRCan
- NREL
- NRTEE
- Nsairat, S. F.
- Nstc
- Number, P. V.
- Nunes, S.
- Nussbau, M. A.
- Nuur, C.
- NY Manufactured Housing Research Allianc
- Nyg?rd, T.
- Nyssa, Z.
- OAA
- Obiso, M. L.
- O'brien, W.
- O'connor, T. J.
- Odagiri, G.
- Oddo, V.
- Odeen, K.
- ?deen, K.
- OECD
- Ofori, G.
- Ogle, R.
- Oglesby, L.
- Ogura, D.
- Oh, K.
- O'hern, T. J.
- Ohgke, H.
- Ohkubo, T.
- Ojanen, T.
- Drying capabilities of wood frame walls with wood siding
- Effect of exfiltration on the hygrothermal behaviour of a residential wall assembly: results from calculations and computer simulations
- Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part I -- field measurements
- Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part II --verification and numerical studies
- Improving indoor climate and comfort with wooden structures
- Improving the drying efficiency of timber frame walls in cold climates, by using exterior insulation
- Integration of simplified drying tests and numerical simulation in moisture performance analysis of the building envelope
- Measuring and modeling vapor boundary layer growth during transient diffusion heat and moisture transfer in cellulose insulation
- Modeling heat, air and moisture transport through building materials and components
- Moisture and bio-deterioration risk of building materials and structuresL?hdesm?ki
- Moisture buffer value of building materials
- Moisture Buffer Value of Materials in Buildings
- Moisture performance of an airtight, vapor-permeable building envelope in a cold climate
- Moisture transport coefficient of pine from gamma ray absorption measurements
- Numerical simulation of mould growth in timber frame walls
- Thermal and moisture performance of a sealed cold-roof system with a vapor-permeable underlay
- Towards modelling of decay risk of wooden materials
- Oka, S.
- Okeil, A.
- Okland, O.
- Oksaa, P.
- Okuyama, H.
- Olek, W.
- Olesen, B. W.
- Oleskowicz-popiel, C.
- Oleszkiewicz, I.
- Olias, E.
- Oliva, A.
- Oliveira, R. C. L. F.
- Oliveira, S. P.
- Olivieri, J. N.
- Olivieri, L.
- Olmedo, R.
- Olsen, T. H.
- Olson, D. R.
- Olson, J.
- Olutmayin, S. O.
- Omar, M. A.
- Omer, A. M.
- Omojaro, P.
- O'neill, B.
- Ong, T.
- Onishi, Y.
- Onstott, T. C.
- Onysko, D. M.
- Airtightness of wall sheathing as a function of lumber drying
- Heat, air and moisture control in walls of Canadian houses: a review of the historic basis for current practices
- Methodology and design of field experiments for monitoring the hygrothermal performance of wood frame enclosures
- Remediating high moisture levels in the wall cavities of preserved wood foundations
- Oppermann, H.
- Oprea, C.
- Oral, G. K.
- Ordenes, M.
- Ord¨®?ez, J.
- O'reilly, A.
- Oreszczyn, T.
- Orhan, F.
- Orioli, A.
- Oriolo, F.
- Orme, M.
- Ortiz, J.
- Ortiz, O.
- Osama, M.
- Osanyintola, O. F.
- An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data
- Effect of initial conditions, boundary conditions and thickness on the moisture buffering capacity of spruce plywood
- Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact
- Osborn, M.
- Osdell, V.
- OSHA
- Osmani, M.
- Os¨®rioa, T.
- Ossenbrink, H.
- Ostrowski, R.
- Airborne fungi and their secondary metabolites in working places in a compost facility
- Exposure to airborne fungi, MVOC and mycotoxins in biowaste-handling facilities
- Species-specific production of microbial volatile organic compounds (MVOC) by airborne fungi from a compost facility
- Species-specific profiles of mycotoxins produced in cultures and associated with conidia of airborne fungi derived from biowaste
- Otanicar, T. P.
- Othman, M. Y.
- Othman, Y.
- Ott, W. R.
- Ou, Y.
- Ouyang, Q.
- Owen, G.
- Owolabi, A. A.
- Ozaki, A.
- Simulation software of the hygrothermal environment of buildings based on detailed thermodynamic models
- Systematic analysis model on combined heat and water transfer using water potential based on thermodynamics
- Systematic analysis model on combined heat and water transfere of gaseous, liquid and solid phase water system, based on thermodynamic energy
- Ozcan, S. E.
- Ozdemir, I. M.
- Ozkaynak, H.
- ?zt¨ąrk, L. D.
- Prediction of building envelope performance in the design stage: an application for office buildings
- Paajanen, L.
- Paassen, v.
- Pacala, S.
- Pacheco, R.
- Padfield, T.
- Humidity buffering of interior spaces by porous,absorbent insulation, part of hygrothermal properties of alternative insulation materials
- Non-isothermal water vapour transmission through porous insulation. Part 1: The climate chamber
- Test cell measurements of moisture buffer effects
- The role of absorbent materials in moderating changes of relative humidity
- Padmanabha, H. S. A.
- Paepe, M.
- Benchmark experiments for moisture transfer modelling in air and porous materials
- CFD modelling of HAM transport in buildings: The importance of local indoor climate
- Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage
- Evaluation of the different definitions of the convective mass transfer coefficient for water evaporation into air
- Experimental validation and sensitivity analysis of a coupled BES-HAM model
- Impact of whole-building hygrothermal modelling on the assessment of indoor climate in a library building
- On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model
- On the applicability of the heat and mass transfer analogy in indoor air flows
- Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling
- Pagliaro, M.
- Pajum?gi, A.
- Palfreyman, J. W.
- Development of model systems for investigations of the dry rot fungus Serpula lacrymans (Schumach. ex Fr.) Gray: Use for analysis of the environmental sensitivity of the organism
- The use of representative modelling to test the efficacy of environmental control treatments for the dry rot fungus Serpula lacrymans: simulating the infection and the treatment of flooring timber
- Pallis, J. M.
- Palmgren, F.
- Palmgren, U.
- Palmisano, G.
- Palmiter, L.
- Palom?ki, E.
- Palomo, A.
- Palyvos, J. A.
- Pan, J.
- Pang, W.
- Pantic, S.
- Panwar, N. L.
- Papadopol, P.
- Papadopoulos, A. M.
- Papadopoulos, C. E.
- Papaefthimiou, S.
- Papamichael, K.
- Parameshwaran, R.
- Parappukkaran, S.
- Parat, S.
- Parekh, A.
- Parent, D.
- Parfitt, M. K.
- Parida, B.
- Paris, J.
- Parish, J.
- Park, J.
- Parker, D. S.
- Parker, P.
- Parlange, J.
- Parleniuk, D.
- Parmon, V. N.
- Parnham, P.
- Paroli, R
- Paroli, R.
- Parrett, F.
- Parsons, K. C.
- Parvataneni, R.
- Pasanen, A. L.
- A review: fungal exposure assessment in indoor environments
- Airborne mesophilici fungal spores in various residential environments
- Can microbial volatile metabolites cause irritation at indoor air concentrations?
- Critical aspects on the significance of microbial volatile metabolites as indoor air pollutants
- Effect of duct-cleaning detergents and disinfection substances on mould growth
- Ergosterol content in various fungal species and biocontaminated building materials
- Evaluation of indoor fungal exposure
- Fungal growth and survival in building materials under fluctuating moisture and temperature conditions
- Fungal microcolonies on indoor surfaces an explanation for the base-level fungal spore counts in indoor air
- Growth and volatile metabolite production of Aspergillus versicolor in house dust
- Occurrence and moisture requirements of microbial growth in building materials
- Sensory irritating potency of some microbial volatile organic compounds (MVOCs) and a mixture of five MVOCs
- Sensory irritation of microbially produced volatile organic compounds in mice during repeated exposures
- Significance of air humidity and air velocity for fungal spore release into the air
- The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials
- Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
- Volatile organic metabolites associated with some toxic fungi end their mycotoxins
- Pasanen, J.
- Pasanen, P.
- Can microbial volatile metabolites cause irritation at indoor air concentrations?
- Effect of duct-cleaning detergents and disinfection substances on mould growth
- Ergosterol content in various fungal species and biocontaminated building materials
- Fungal growth on wood surfaces at different moisture conditions in crawl spaces
- Fungal spore transport through a building structure
- Growth and volatile metabolite production of Aspergillus versicolor in house dust
- Microbial contamination of indoor air due to leakages from crawl space- a field study
- Significance of air humidity and air velocity for fungal spore release into the air
- Transport of fungal spores from crawl space to indoors
- Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions
- Volatile organic metabolites associated with some toxic fungi end their mycotoxins
- Pasanen, R. S.
- Pasanena, A.
- Pasanena, P.
- Pasqualetto, L.
- Pasqualini, P.
- Pasquire, C.
- Passerini, F.
- Past, M. P. C.
- Pastuszka, J.
- Patankar, S. V.
- Patenaude, A.
- Pathak, M. J. M.
- Patterson, M. R.
- Patterson, R.
- Pauker, M. T.
- Paul, G. C.
- Pavli¨Şk, J.
- Pavlik, Z.
- Pavl¨Şk, Z.
- Pavlovic, M. N.
- Pawliszyn, J.
- A laboratory technique for investigation of diffusion and transformation of volatile organic compounds in low permeability media
- Air sampling with porous solid-phase microextraction fibers
- Analysis of environmental air samples by solid-phase microextraction and gas-chromatography ion-trap mass-spectrometry
- Design and validation of portable SPME devices for rapid field air sampling and diffusion based calibration
- Evolution of solid-phase microextraction technology
- Fast field sampling/sample preparation and quantification of volatile organic compounds in indoor air by solid-phase microextraction and portable gas chromatography
- New trends in solid-phase microextraction
- Recent advances in solid phase microextraction and membrane extraction with a sorbent interface
- Solid phase microextraction
- Paykani, A.
- Pazera, M.
- Pearce, E.
- Pearce, J. M.
- Pears, A.
- Peart, M. V.
- Peat, J. K.
- Pedersen, C. R.
- Pedersen, S.
- Peer, L. B.
- Pehrson, C.
- Pei, G.
- Pekkanen, J.
- Characteristics of moisture damage in houses and their association with self-reported symptoms of the occupants
- Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
- Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
- Pekkanenb, J.
- Pel, L.
- Pelkonen, J.
- Pelland, S.
- Pellizzari, E.
- Peltier, L. J.
- Peltola, J.
- Peltola, K.
- Peng, C.
- Peng, J.
- Pennarun, P.
- Penning, R. L.
- Pentti, M.
- Pepeljnjak, S.
- Pepper, D. W.
- Peppes, A. A.
- Perdrix, A.
- Pereira, F. O. R.
- Perera, R. S.
- Perers, B.
- Perez-Lombard, L.
- Perez-Raago, C. A.
- Perino, M.
- Perkins, J.
- Perlman, J.
- Perr¨¦, P.
- Pershing, J.
- Persily, A. K.
- Persky, V.
- Persmann, J.
- Persson, K.
- Pessi, A.
- Peterman, C.
- Petersen, S.
- Peterson, L. R.
- Petrakis, M.
- Petrasch, J.
- Petrie, T. W.
- Petrisek, R. E.
- Petrone Architects
- Peuhkuri, R.
- International building physics toolbox, general report
- Investigation of Microclimate by CFD Modeling of Moisture Interactions between Air and Constructions
- Moisture and bio-deterioration risk of building materials and structuresL?hdesm?ki
- Moisture buffer value of building materials
- Moisture Buffer Value of Materials in Buildings
- Moisture dynamics in building envelopes
- Non-isothermal water vapour transmission through porous insulation. Part 1: The climate chamber
- The International Building Physics Toolbox in Simulink
- Towards modelling of decay risk of wooden materials
- Phang, J. C. H.
- Phd, M.
- Philip, J. R.
- Philipp, P. C.
- Philippi, P. C.
- Philippib, P. C.
- Phillips, B.
- Phillips, J. R.
- Phillipson, M. C.
- Piaia, J. C. Z.
- Pieckov¨˘, E.
- Pienaar, E.
- Pieri, G.
- Pietila, A.
- Pietrzyk, K.
- Pikas, E.
- Pike, L.
- Pilarczyk, M.
- Pilkey, W. D.
- Pilkington, B.
- Pinel, P.
- Pingoud, K.
- Piotrowska, M.
- Pirjola, L.
- Piroozmandi, F.
- Pitts, A.
- Pjetraj, M.
- Plagge, R.
- A comparison of different techniques to quantify moisture content profiles in porous building materials
- A two-levelled hygrothermal material database for the numerical simulation program DELPHIN4
- Analysis of selected water absorption coefficient measurements
- Numerical and experimental investigation of coupled heat and moisture transport problems
- On the hysteresis in moisture storage and conductivity measured by the instantaneous profile method
- Planer, H.H.S.
- Platero, C. A.
- Platten, J. K.
- Pless, P.
- Pless, S.
- Plokker, W.
- PO, F.
- Podebradska, J.
- Poesen, J.
- Poffa, N.
- Poikalainen, V.
- Poirier, D.
- Poirier, G. F.
- Poissant, Y.
- An Evaluation of the Potential of Building Integrated Photovoltaics in Canada
- Performance monitoring of the Nunavut arctic college PV system: nine years of reliable electricity generation
- Spatial insolation models for photovoltaic energy in Canada
- The Development of Photovoltaic Resource Maps for Canada
- Polanco, D.
- Pomianowski, M.
- Ponessa, J.
- Ponterio, L.
- Pontzer, H.
- Poon, C.
- Poovey, H.
- Pope, A. M.
- Pope, S. B.
- Popiolek, Z.
- Popov, V.
- Portales, C.
- Portnoy, J. M.
- Posey, J. B.
- Posner, J. D.
- Post, N. M.
- Pout, C.
- Power, M.
- Prahm, L. P.
- Praks, J.
- Prazak, D.
- Pressnail, K. D.
- Pretlove, S.
- Price, D. L.
- Price, M. R.
- Priel, M.
- Pries, F.
- Privato, C.
- Privitera, G.
- Prokhorov, A. V.
- Prosen, H.
- Proskiw, G.
- Protzen, J.
- Proulx, G.
- Public Technology Inc and U.S. Green Building Council
- Puccetti, A.
- Puits, R.
- Pulaski, M. H.
- Pullen, S. F.
- Pulselli, R. M.
- Pushkar, S.
- Puterman, M.
- Putterman, M.
- PWC
- Qin, J.
- Qin, M.
- Coupled heat and moisture transfer in multi-layer building materials
- Experimental and theoretical investigation of non-isothermal transfer in hygroscopic building materials
- Nonisothermal moisture transport in hygroscopic building materials: modeling for the determination of moisture transport coefficients
- Qin, S. J.
- Qiu, T.
- Qiu, X.
- Qiu, Z.
- Qu, J.
- Quan, H.
- Quarles, S. L.
- Queen's University Applied Sustainability Research Group.
- Quenard, D.
- Queneudec, G.
- Queneudec, M.
- Quesada, G.
- Quintana, J.
- Quirouette, R. L.
- Basics of Noise Control
- Building envelope design using metal and glass curtain wall systems
- Design considerations for an air barrier system
- Glass and Aluminum Curtain Wall Systems
- On-site exterior wall monitoring methods for air leakage, condensation and rain penetration control problems
- The rainscreen wall: a commissioning protocol
- Quirt, J. D.
- Quraishi, A.
- R2000
- R?berg, U.
- Rada, C.
- Rader, D. J.
- Raha, S.
- Rahim, N. A.
- Rahman, H. A.
- Rahmstorf, S.
- Raichlenl, D. A.
- Rainey, F.
- R?is?nen, J.
- Rajic, N.
- Rajoria, C. S.
- Rakkwamsuk, P.
- Ralegaonkar, R. V.
- Ramadan, H.
- Ramakrisnan, V.
- Ramanathan, R.
- Ramirez, D.
- Ramos, N. M. M.
- Ramsey, J. W.
- Rand, T. G.
- Randers, J.
- Rannacher, R.
- Rantam?ki, P.
- Rantio-lehtimaki, A.
- Rantio-lehtim?ki, A.
- Rao, C.
- Rao, J.
- A limit state design (LSD) approach for comparing relative drying performance of wood-frame envelope systems with full-scale lab, A roadmap towards intelligent net zero- and positive-energy buildings,
- A new test method to determine the relative drying capacity of building envelope panels of various configurations
- A new testing method to evaluate the relative drying performance of different building envelope systems using water trays
- Building Physics: 3rd International Conference in Building Physics
- Building pressurisation can affect possibility of mould growth
- Comparaison de m¨¦thodes de mesure de flux de chaleur pour sp¨¦cimens de grandes et moyennes dimensions
- Design and construction of an environmental chamber facility
- Development of experimental procedure to evaluate potential movement of mold spores from wall cavity to indoor environment
- Development of HAM tool for building envelope analysis
- Effect of capillarity on rainwater penetration in the building envelope
- Environmental chamber for investigation of building envelope performance
- Evaluation of radiance's genBSDF capability to assess solar bidirectional properties of complex fenestration systems
- Experimental evaluation of potential transport of mold spores from moldy studs in full-size wall assemblies
- Experimental study of temperature distributions across two curtain wall systems
- Identification and transport investigation of microbial volatile organic compounds in full-scale stud cavities
- In-cavity evaporation allowance--A drying capacity indicator for wood-frame wall system
- Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study
- Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test-hut: Part 2- CFD study
- Measuring air leakage characteristics with flexible double air chambers
- Measuring air leakage of full-scale curtain wall sections using a non-rigid air-chamber method
- Numerical investigation of the influence of room factors on HAM transport in a full-scale experimental room
- Review and framework for large-scale laboratory studies on wetting and drying of building envelopes
- Statistical analysis of microbial volatile organic compounds in an experimental project: identification and transport analysis
- Study of the reduced impact of thermal bridges in two sprayed-applied polyurethane wall assemblies
- Test method to measure the relative capacity of wall panels to evacuate moisture from their stud cavity
- Transfer of heat, moisture and air through metal curtain walls
- Use of an environmental chamber to investigate large-scale envelope specimen hygrothermal performance
- Rao, K. U.
- Rao, S. l.
- Rapone, G.
- Rapp, A. O.
- Rappaport, S. M.
- Rasmussen, T. V.
- Ratkowsky, D. A.
- Ratti, C.
- Building form and environmental performance: archetypes, analysis and an arid climate
- Sunscapes: `Solar envelopes' and the analysis of urban DEMs, Computers
- The solar envelope: its meaning for energy and buildings, Building form and environmental performance: archetypes, analysis and an arid climate
- Raunemaa, T.
- Raunio, J. P.
- Rautiala, S.
- Raven, J.
- Raw, G.
- Raydan, D.
- Rayment, P. R.
- Razack, S. A.
- Razak, A.
- Razykov, T. M.
- Rea, A. W.
- Reading, A. R.
- Reardon, J. T.
- Redaelli, V.
- Redd, S. C.
- Reddy, M. S.
- Reenen, D. V.
- Reenen, v.
- Indoor and outdoor weather analysis tool for hygrothermal modelling
- Influence of material properties on the moisture response of an ideal stucco wall: results from hygrothermal simulation
- Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
- Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
- Use of hygrothermal numerical modeling to identify optimal retrofit options for high-rise buildings
- Regalado, L.
- Reid, J.
- Reijula , K.
- Reijula, K.
- Bacteria, molds, and toxins in water-damaged building materials
- Concentrations of viable spores of fungi and actinomycetes in ventilation channels
- Evaluation of priorities for repairing in moisture-damaged school buildings in Finland
- Mycotoxins in crude building materials from water-damaged buildings
- Reiman, M.
- Reindl, D. T.
- Reinhardt, J. H.
- Reinhart, C.
- Reinikainen, L. M.
- Remans, B.
- Remenyik, C. J.
- Remmele, T. E.
- Ren, J.
- Ren, P.
- Comparisons of seasonal fungal prevalence in indoor and outdoor air and in house dusts of dwellings in one Northeast American county
- Dustborne Alternaria alternata antigens in US homes: results from the National Survey of Lead and Allergens in Housing
- The relation between fungal propagules in indoor air and home characteristics
- REN21
- Reneckis, D.
- Renr, H.
- Renshaw, J.
- Reponen, A.
- Reponen, M.
- Reponen, T
- Reponen, T.
- Aerodynamic diameters and respiratory deposition estimates of viable fungal particles in mold problem dwellings
- Aerodynamic versus physical size of spores: measurement and implication for respiratory deposition
- Aerosol characteristics of airborne actinomycetes and fungi
- Bioaerosol collection by a new electrostatic precipitator
- Characteristics of airborne actinomycete spores
- Collection of airborne microorganisms by a new electrostatic precipitator
- Collection of airborne spores by circular single-stage impactors with small jet-to-plate distance
- Collection of bioaerosol particles by impaction: effect of fungal spore agglomeration and bounce
- Collection of fungal spores on air filters and spore reentrainment from filters into air
- Comparison of concentrations and size distributions of fungal spores in buildings with and without mould problems
- Control of exposure to airborne viable microorganisms during remediation of moldy buildings; report of three case studies
- Development and evaluation of aerosol generators for biological materials
- Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
- Effect of indoor sources on fungal spore concentrations and size distributions
- Effect of relative humidity on the aerodynamic diameter and respiratory deposition of fungal spores
- Evaluation of a new personal sampler for enumerating airborne spores
- Everyday activities and variation of fungal spore concentrations in indoor air
- Field Testing of New Aerosol Sampling Method With a Porous Curved Surface as Inlet
- Fungal fragments as indoor air biocontaminants
- Fungal spore source strength tester: laboratory evaluation of a new concept
- Long-term sampling of airbome bacteria and fungi into a non-evaporating liquid
- Performance of Air-O-Cell, Burkard, and Button samplers for total enumeration of airborne spores
- Personal exposures and microenvironmental concentrations of particles and bioaerosols
- Release of Streptomyces albus propagules from contaminated surfaces
- Size distributions of airborne microbes in moisture-damaged and reference school buildings of two construction types
- Techniques for dispersion of microorganisms into air
- Total and culturable airborne bacteria and fungi in arid region flood-damaged residences
- Viable fungal spores as indoor aerosols
- Reppe, P.
- Resagk, C.
- Revzan, K. L.
- Reynolds, A. J.
- Rheault, S.
- Rhine, J. R.
- Riain, C.
- Ribot, B.
- Richalet, V.
- Richard, E. K.
- Richard, R.
- Richards, R. F.
- Richardson, D. B.
- Richardson, J. K.
- Richardson, K.
- Richman, R. C.
- Richmond-Wiener, J.
- Richter, D. L.
- Ridley, B.
- Ridley, I.
- Riesner, K.
- Riethmuller, O. A. M. M. L.
- Riffat, S. B.
- A review on hybrid photovoltaic/thermal collectors and systems
- A review on wind driven ventilation techniques
- Influence of tracer-gases on the accuracy of interzonal airflow measurements
- Measurement of heat and mass transfer between the lower and upper floors of a house
- Review of passive solar heating and cooling technologies
- Review on heat recovery technologies for building applications
- Rijn, G. V.
- Riley, D. R.
- Riley, W. J.
- Ring, J.
- Ritoux, S.
- Ritschkoff, A.
- Ritter, N.
- Ritz, B.
- Rivard, H.
- Rivin, R.
- Rivoalen, H.
- Rizzo, G.
- Rizzo, S.
- Roach, S. A.
- Roache, N. F.
- Robbins, C. A.
- Robbins, H.
- Robbins, J.
- Robert, A.
- Robert, S.
- Roberti, N.
- Roberts, B.
- Roberts, P. J. W.
- Roberts, S.
- Robertson, W.
- Robin, S.
- Robine, E.
- Robson, R.
- Rocha, A. C.
- Rocha, J. C.
- Rode, C.
- eds. Annex 41 Final Report, Volume 1: Modelling Principles and Common Exercises
- Empirical validation of a transient computer model for combined heat and moisture transfer
- Experimental investigation of the hygrothermal performance of insulation materials
- Full-scale testing of indoor humidity and moisture buffering in building materials
- Global building physics
- International building physics toolbox, general report
- Investigation of Microclimate by CFD Modeling of Moisture Interactions between Air and Constructions
- Latent heat flow in lightweight roofs and its influence on the thermal performance of buildings
- Model and experiments for hygrothermal conditions of the envelope and indoor air of buildings
- Moisture buffer value of building materials
- Moisture Buffer Value of Materials in Buildings
- Moisture buffering of building materials
- Moisture conditions of non-ventilated, wood-based, membrane-roof components
- Moisture: its effects on the thermal performance of a low-slope roof system
- Non-isothermal water vapour transmission through porous insulation. Part 1: The climate chamber
- Organic insulation materials: effect on indoor humidity and necessity of a vapor barrier
- Test cell measurements of moisture buffer effects
- The importance of moisture buffering for indoor climate and energy conditions of buildings
- The International Building Physics Toolbox in Simulink
- The self-drying concept for flat roofs
- Tools for performance simulation of heat, air and moisture conditions of whole buildings
- Whole-building Hygrothermal Simulation Model
- Rode, P. C.
- Rode, R.
- Rodes, C. E.
- Rodono, G.
- Rodrigues, M. F. S.
- Rodriguez, J.
- Roeleveld, D.
- Roels, B.
- Roels, S.
- A comparison of different techniques to quantify moisture content profiles in porous building materials
- A comparison of the Nordtest and Japanese test methods for the moisture buffering performance of building materials
- A quasi-steady state implementation of air convection in a transient heat and moisture building component model
- Description of the moisture capacity of building materials
- Determination of the isothermal moisture transport properties of porous building materials
- Determination of the liquid water diffusivity from transient moisture transfer experiments
- Determination of the moisture capacity of porous building materials
- Impact, absorption and evaporation of raindrops on building facades
- In situ determination of the moisture buffer potential of room enclosures
- Microscopic analysis of imbibition processes in oolitic limestone
- Modeling fluid flow in fractured media using continuum, network and discrete aproaches
- Position paper on material characterization and HAM model benchmarking
- Qualitative and quantitative assessment of interior moisture buffering by enclosures
- Review of mould prediction models and their influence on mould risk evaluation
- Simulating non-isothermal water vapour transfer: an experimental validation on multi-layered building components
- Wind-driven rain as a boundary condition for HAM simulations: Analysis of simplified modelling approaches
- Rogers, C.
- Roizarda, D.
- R?kenes, C. D.
- Rolland, J.
- R?llig, M.
- Rollins, D.
- Romain, M. K. A.
- Romano, J.
- Romano, P.
- Ronnow, D.
- Roodman, D. M.
- Roonan, W. W.
- Roos, C.
- A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
- Predicting psychrometric conditions in biocontaminant microenvironments with a microclimate heat and moisture transfer model - description and field comparison
- Roots, P.
- Roponen, M.
- Roques, M.
- Rose, O.
- Rose, W. B.
- Rosen, M. A.
- Rosenfeld, J. L. J.
- Rosiers, J.
- Rosina, E.
- Rosowsky, D. V.
- Ross, M.
- Rostasy, F. S.
- Rosvold, G. O.
- Roulet, C. -.
- Rousse, D.
- A comprehensive review of solar facades. Opaque solar facades
- A review on phase-change materials: Mathematical modeling and simulations
- Experimental and numerical characterization of thermal bridges in prefabricated building walls
- Modeling phase change materials behavior in building applications: Comments on material characterization and model validation
- Rousseau, J.
- Rousseau, M. Z.
- A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
- An Overview of the Survey of Building Envelope Failures in the Coastal Climate of British Columbia, Performed by Morrisson-Hershfield Limited for CMHC (1996)
- Creating durable bonds between windows and walls
- Designing exterior walls according to the rainscreen principle
- Heat, air and moisture control strategies for managing condensation in walls
- Moisture management: prediction of response of exterior wall elements to climates
- Monitoring the hygrothermal performance of a masonry wall with and without thermal insulation
- Report from Task 2 of MEWS Project - Description of 17 Large Sale Wall Specimens Built for Water Entry Investigation in IRC Dynamic Wall Testing Facility
- Review of factors affecting the durability of repointing mortars for older masonry
- Roux, J.
- Rouxel, T.
- Rouxhet, P. G.
- Rovas, D.
- Rowan, N. J.
- Royer, A.
- Rozniakowski, K.
- Rozyneka, P.
- Rubel, F.
- Rubes, J. M.
- Rubes, P. L.
- Ruck, N. C.
- Rucker, P.
- Rudbeck, C.
- Ruden, H.
- R¨ąden, H.
- Rudic, A.
- Rudolf, B.
- Rudolph, M.
- Rueden, H.
- Ruest, K.
- Rufer, L.
- Rummel, K. E. D. M. S.
- Ruokolainen, L.
- Ruotsalainen, M.
- Rusaou?n, G.
- Rusaouen, G.
- Rusaou?n, G.
- Ruskeeniemi, T.
- Ruslan, M. H.
- Russell, M. L.
- Russill, C.
- R¨ąther, R.
- Rutten, P. G. S.
- Ruuskanen, J.
- Ryan, J.
- Rybicki, A.
- Rylander R.
- Rylander, R.
- Rylander, S. P.
- Ryszard, G.
- Sabariego, S.
- Sabarinathan, J.
- Sabbioni, C.
- Sabir, H.
- Sadek, F.
- Sadineni, S. B.
- Saelens, D.
- Saetre, T. O.
- Saffir, H. S.
- Sagdeev, R. Z.
- Sage-lauck, J. S.
- Saglam, S.
- Sahal, N.
- Sahin, A. Z.
- Sahlin, P.
- Said, D. M.
- Said, M. N.
- Sa?d, M. N. A.
- Said, N.
- Saidur, R.
- Sailor, D. J.
- Saito, K.
- Saiz-jimenez, C.
- Sakashita, H.
- Sakr, W.
- Salah, N. B.
- Salahuddin, A.
- Salam, Z.
- A comprehensive MATLAB Simulink PV system simulator with partial shading capability based on two-diode model
- A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model
- An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE)
- Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model
- Salas, V.
- Salcudean, M.
- Saleh, A. M.
- Salerno, M.
- Salicone, S.
- Salinas, C. T.
- Salkinoja-Salonen, M.
- Sallee, H.
- Sall¨¦e, H.
- Salles, C.
- Salminen, K.
- Salo, P.
- Salomonsson, G. D.
- Salonvaara, M.
- Drying capabilities of wood frame walls with wood siding
- EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
- Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part I -- field measurements
- Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part II --verification and numerical studies
- Hygrothermal performance of a new light gauge steel-framed envelope system
- Hygrothermal system-performance of a whole building
- Improving indoor climate and comfort with wooden structures
- Influence of material properties on the hygrothermal performance of a high-rise residential wall
- Integrated hygrothermal performance of building envelopes and systems
- Integration of simplified drying tests and numerical simulation in moisture performance analysis of the building envelope
- Measurements and two-dimensional computer simulations of the hygrothermal performance of a wood frame wall
- Measuring and modeling vapor boundary layer growth during transient diffusion heat and moisture transfer in cellulose insulation
- Moisture transport in building envelopes using an approximate factorization solution method
- Numerical simulation of mould growth in timber frame walls
- Prediction of hygrothermal performance of building envelope parts coupled with indoor climate
- Stochastic building envelope modeling -- the influence of material properties
- Salonvaaray, M.
- Salvetti, O.
- Samagaio, A.
- Samimi, B.
- Samson, A.
- Samson, O.
- Samson, R.
- Samuel, D. G. L.
- Samuelson, I.
- Checklists for clean and moisture safe buildings
- Hygrothermal performance of attics
- Microbiological growth on building materials - critical moisture levels. State of the art
- Modeling heat and moisture transfer through fibrous insulation with phase change and mobile condensates
- Prevention of moisture and mould damages in buildings
- S¨˘nchez, C.
- Sandberg, M.
- Sandberg, P. I.
- Sanders, C. H.
- Sandstr?m, R.
- Sanjuan, C.
- Sankarasubramaniam, Y.
- Sano, E. E.
- Sanseverino, E. R.
- Santamouris, A. P. M.
- Santamouris, M.
- Santilli, J.
- Santini, E.
- Santos, A. J.
- Santos, G. H. D.
- Santos, P.
- Santosa, G. H. d.
- Saraf, A.
- Sarafidis, Y.
- Sarg, w. H.
- Sarhaddi, F.
- Saro, O.
- Sartori, E.
- Sartori, I.
- Sassi, O.
- Sathre, R. S.
- Sathyanarayanan, R.
- Sato, N.
- Sattler, K.
- Saude, I.
- Sauer, A.
- Saunders, C. A.
- Sautour, M.
- Savilahti, R.
- Savory, E.
- Sawers, J.
- Saxena, J.
- Saxenab, P.
- Saxon, A.
- Scaccianoce, G.
- Scalat, S.
- Scanada Consultants Limited and CanAm Building Envelope Specialists Inc
- Scannapieco, E.
- Scarlat, N.
- Scarpino, P. V.
- Schaar-gabriel, E.
- Schajer, G. S.
- Scharmer, R. C.
- Schaurich, D.
- Scheff, P.
- Scheffer, T. C.
- Scheffler, G.
- Scheffler, M. J.
- Schell, . H. J.
- Schiff, S.
- Schijndel, A.
- Schijndel, v.
- SCHL
- Schleibinger, H.
- Emission patterns and emission rates of MVOC and the possibility for predicting hidden mold damage?
- Microbial volatile or-ganic compounds in the air of moldy and mold-free indoor environments
- Microbial volatile organic compounds in the air of moldy and mold-free indoor environments
- Moisture content of different new and used air filter media under static climatic conditions
- Schmechel, D.
- Schmidt, C. M.
- Schmidt, E. L.
- Schmidt, G. R.
- Schmidt-doehl, F.
- Schneider, T.
- Schnurer, J.
- Schn¨ąrer, J.
- Schober, G.
- Schobermayr, H.
- Schoeps, K. O.
- Schrefler, B. A.
- Schreiber, F. W.
- Schroeder, C. K.
- Schultz, J.
- Schultz, M. P.
- Schumacher, C.
- Schutz, E.
- Schuysemans, S.
- Schwalbe, R.
- Airborne fungi and their secondary metabolites in working places in a compost facility
- Exposure to airborne fungi, MVOC and mycotoxins in biowaste-handling facilities
- Species-specific production of microbial volatile organic compounds (MVOC) by airborne fungi from a compost facility
- Species-specific profiles of mycotoxins produced in cultures and associated with conidia of airborne fungi derived from biowaste
- Schwartz, J.
- Schwartz, N. V.
- Schwarz, M. P.
- Schwarze, F.
- Schwarzer, K.
- Sciver, S. W. V.
- Scofield, J. H.
- Scognamiglio, A.
- Scott, D. L.
- Scott, J. A.
- Scott, R.
- Seaden, G.
- Sedlbauer, K.
- A new model for mould prediction and its application on a test roof
- A new model for mould prediction and its application on dwellings with mould on the outer facades
- Ecological insulation materials - does sorption moisture affect their insulation performance?
- Information and Technology Transfer from IBP: Mold Growth on ETICS (EIFS) as a Result of "Bad Workmanship"?
- Moisture buffering effects of interior linings made from wood or wood based products
- Mold growth prediction by computational simulation
- Prediction of mould fungus formation on the surface of and inside building components
- Prediction of mould growth by hygrothermal calculation
- The hygrothermal behaviour of rooms: combining thermal building simulation and hygrothermal envelope calculation
- Seel, J.
- Sefker, I.
- Sefker, T.
- Seidel, H.
- Seiffart, A.
- Selkowitz, S.
- Seltzer, J.
- Selvaraj, J. A.
- Sempere-Torres, D.
- Sen, M. M.
- Sen, Z.
- Senkpiel, K.
- Sensors, H.T.
- Senturk, A.
- Senum, G. I.
- Seo, T.
- Seol, H.
- Sepp?nen, O.
- Sergentd, A.
- Serra, V.
- Serrette, R. L.
- Service, C. F.
- Seuri, M.
- Sexton, K.
- Sextro, R. G.
- Seymour, M.
- Sha, K.
- Shaffie, A. M.
- Shah, J.
- Shah, L. J.
- Shah, M. M.
- Shahid, H.
- Shahnavaz, H.
- Shakun, W.
- Shameri, M. A.
- Shamir, R.
- Shamlo, N. B.
- Shamsudin, A.
- Shan, F.
- Shao, J.
- Shao, L.
- Shapovalov, A.
- Sharples, S.
- Shaw, C. Y.
- Balanced fan depressurization method for measuring component and overall air leakage in single-and multifamily dwellings
- Measured airtightness of an installed skylight
- Measurements of volatile organic compound (VOC) emissions from wood stains using an electronic balance
- Mechanical Ventilation and Air Pressure in Houses
- Methods for conducting small scale pressurization tests and air leakage data of multi storey apartment buildings
- Ventilation strategies for small buildings, the trend to airtightness
- Shea, E. F. A.
- Sheldon, L.
- Sheltersource, Inc.
- Shelton, B. G.
- Shen, H.
- Shen, L. Y.
- Shen, P.
- Shen, Q.
- Sherman, M.
- A comparison of the power law to quadratic formulations for air infiltration calculations
- Air Infiltration Measurement Techniques
- Air-tightness of US. Dwellings
- ASHRAE'S First Residential Ventilation Standard
- ASHRAE'S Residential Ventilation Standard: Exegesis of Proposed Standard 62.2
- Building airtightness: research and practice
- Infiltration Degree-Days: A Statistic for Quantifying Infiltration-Related Climate
- Multizone age-of-air analysis
- On the estimation of multizone ventilation rates from tracer gas measurements
- Residential ventilation and energy characteristics
- Selecting Whole-House Ventilation Strategies To Meet Proposed Ashrae Standard 62.2: Energy Cost Considerations
- Tracer-gas techniques for measuring ventilation in a single zone
- Uncertainties in fan pressurization measurements
- Uncertainty in air flow calculations using tracer gas measurements
- Sherwood, G. E.
- Sherwood, S. I.
- Shevlin, J.
- Shi, L.
- Shi, X.
- Shi, Y.
- Shibaike, H.
- Shih, N.
- Shih, T.
- Shih, W. J.
- Shimada, K.
- Shimakura, K.
- Shimizu, M.
- Shimoda, Y.
- Shine, J. P.
- Shipworth, D.
- Shirakawa, M. A.
- Shirasawa, K.
- Shirey, D. B.
- Shirtliffe, C. J.
- Shoenfeld, Y.
- Shohet, I. M.
- Shook, S. R.
- Short, S.
- Shoukri, M.
- Shrestha, S.
- Shu, C.
- Shub, C.
- Shukla, A. R.
- Shukla, R.
- Shum, M.
- Shutov, A. I.
- Sierck, B. S.
- Sifrini, I.
- Sigsgaard, T.
- Sikander, E.
- Sill, B. L.
- Silva, A. M.
- Silva, M. C. G.
- Silva, N.
- Silva, Z.
- Sim¨˘, E.
- Simard, G.
- Simcox, N. J.
- Simkus, M.
- Simmler, H.
- Empirical validations of solar gain models for a glazing unit with exterior and interior blind assemblies
- Experimental and numerical determination of the total solar energy transmittance of glazing with venetian blind shading
- In situ performance assessment of vacuum insulation panels in a flat roof construction
- Simmons, R. B.
- Sim?es, B.
- Sim?es, N.
- Simon, T. W.
- Simoncini, E.
- Simons, E.
- Simonson, C. J.
- An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data
- Effect of initial conditions, boundary conditions and thickness on the moisture buffering capacity of spruce plywood
- Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part I -- field measurements
- Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part II --verification and numerical studies
- Improving indoor climate and comfort with wooden structures
- Integration of simplified drying tests and numerical simulation in moisture performance analysis of the building envelope
- Measuring and modeling vapor boundary layer growth during transient diffusion heat and moisture transfer in cellulose insulation
- Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact
- Moisture performance of an airtight, vapor-permeable building envelope in a cold climate
- Moisture, thermal and ventilation performance of Tapanila ecological house
- Simpson, C.
- Simpson, W. T.
- Simseka, H.
- Sinclair, D. C. R.
- Sing, K. S. W.
- Singh, H.
- Singh, J.
- Sipes, J. M.
- Sippola, M. R.
- Siqueira, L. F. G.
- Siren, K.
- Sivanandan, A.
- Sivasubramani, R. L.
- Sivasubramani, S. K.
- Siy, E.
- Sj?str?m, C.
- Skerlic, J.
- Skerlj, P. S.
- Skibniewski, M. J.
- Skinner, E. A.
- Skoplaki, E.
- Slooff, K. W. J.
- Slootweg, D.
- Sluis, v. d.
- Small, B. M.
- Smiley, E.
- Smith, D. W.
- An epidemiological study of the relative importance of damp housing in relation to adult health
- Modeling entry of micron-sized and submicron-sized particles into the indoor environment
- The use of representative modelling to test the efficacy of environmental control treatments for the dry rot fungus Serpula lacrymans: simulating the infection and the treatment of flooring timber
- Smith, I.
- Smith, J. E.
- Smith, L. C.
- Smith, R. C.
- Smith, S.
- Smith, W. D.
- Smits, R. E. H. M.
- Smulski, S.
- Snape, P.
- Snell, J.
- Snyder, K. A.
- Soares, N.
- Sobczak, M.
- Sobhnamayan, F.
- Sobol, Y.
- Sobue, N.
- Sockol, M. D.
- Soderman, E.
- S?derstr?m, O.
- Soebarto, V. I.
- Sohn, M. D.
- Solangi, K. H.
- Solanki, S. C.
- Solar Energy Laboratory
- Sol¨¦, A.
- Solomon, S., D. Qin, M. Manning, Z. Chen, M. Marquis, K.B. Averyt, M. Tignor and H.L. Miller (eds.)
- Somarathne, S.
- Song, J.
- Power output analysis of transparent thin-film module in building integrated photovoltaic system (BIPV)
- Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module
- Transparent thermal insulation coatings for energy efficient glass windows and curtain walls
- Song, S.
- Song, Z.
- Sonnemann, G.
- Sopian, K.
- Advances in liquid based photovoltaic/thermal (PV/T) collectors
- Performance analysis of a double-pass photovoltaic/thermal (PV/T) solar collector with CPC and fins
- Perspectives of double skin facde systems in buildings and energy saving
- Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors
- S?rensen, D. N.
- Sorensen, E.
- Sorenson, W. G.
- Acute pulmonary hemorrhage in infants associated with exposure to Stachybotrys atra and other fungi
- Exposures to respirable, airborne penicillium from a contaminated ventilation system: Clinical, environmental epidemiological aspects
- Fungal spores: hazardous to health?
- Review of methods applicable to the assessment of mold exposure to children
- Soroushian, P.
- Sosman, J. A.
- Sotos, P.
- Sottile, G. M.
- Sousa, H.
- Sousa, P. X. B.
- Sozer, H.
- Spalding, D. B.
- Sparber, W.
- Sparks, L. E.
- Gas-phase mass transfer model for predicting volatile organic compound (VOC) emission rates from indoor pollutant sources
- Penetration of ambient fine particles into the indoor environment
- Penetration of particles into buildings and associated physical factors. part I: model development and computer simulations
- Sparks, P. R.
- Sparr, E.
- Spelter, H.
- Spengler, J. D.
- Indoor air pollution: A public health perspective
- Indoor air quality factors in designing a healthy building
- Moisture, organisms, and health effects
- Multi-zonal air flow rates in residences in Boston
- Personal exposure to airborne particles and metals: Results from the particle team study in Riverside, California
- Research futures for healthy indoor air
- Spicer, R.
- Spithoven, J.
- Spolek, C. A.
- Spolek, G.
- Springfield, J.
- Sprinz, D.
- Spurgeo, J.
- Spurgeon, J. C.
- Sram, R.
- Srebric, J.
- Srinivasan, R. S.
- Staff, M.P.I.
- Stainesb, H. J.
- Stamenic, L.
- Stamou, A.
- Stang, B. D.
- Stankov, A.
- Stapountzis, H.
- stark, A.
- Stathopoulos, T.
- A simple apparatus for the evaluation of air infiltration through building envelope components
- Experimental study of the thermal performance of a large institutional building with mixed-mode cooling and hybrid ventilation
- Prediction of wind effects on buildings using computational methods - state of the art review
- Statistics Canada
- Statsoft, I.
- Stavroulakis, G. E.
- Stazi, A.
- Steele, W. G.
- Steeman, H. J.
- CFD modelling of HAM transport in buildings: The importance of local indoor climate
- Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage
- Evaluation of the different definitions of the convective mass transfer coefficient for water evaporation into air
- Modelling indoor air and hygrothermal wall interaction in building simulation: Comparison between CFD and a well-mixed zonal model
- On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model
- On the applicability of the heat and mass transfer analogy in indoor air flows
- Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling
- Steeman, M.
- Benchmark experiments for moisture transfer modelling in air and porous materials
- Experimental validation and sensitivity analysis of a coupled BES-HAM model
- Impact of whole-building hygrothermal modelling on the assessment of indoor climate in a library building
- On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model
- Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling
- The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings
- Steemers, K.
- Stefanakos, E.
- Stefanizzi, P.
- Stehn, L.
- St¨¦phan, L.
- Stephens, G. M.
- Stephenson, D. G.
- Sterling, D. A.
- Sterling, M.
- Stern, M. A.
- Stetzenbach, D.
- Stetzenbach, L. D.
- Detection and enumeration of airborne biocontaminants
- Indoor air investigations and controlled laboratory studies using a variety of aerobiological samplers
- Measurement of airborne fungal spore dispersal from three types of flooring materials
- Use of an experimental room for monitoring of airborne concentrations of microorganisms, glass fibers, and total particles
- Steven Winter Assoc. Inc
- Steven Winter Associates
- Stevens, P.
- Stewart, C. D.
- Stewart, I. W.
- Stewart, J.
- Stewart, R. B.
- Stewart, S. L.
- Stewart, W. E.
- Stewart-Brown, S.
- St-Hilaire, A.
- St-Hilaire, T.
- Stirling, J. S.
- Stockenstrom, H.
- Stollman, U.
- Stolzberg, R. J.
- Stone, G.
- Storey, E.
- Stotler, R. L.
- Stout, D.
- Stovall, T.
- Straaten, v.
- Strachan, P.
- Strand, R. K.
- Straub, J.
- Straube, J. F.
- A review of rain control and design strategies
- Drainage, ventilation drying and enclosure performance
- Driving rain and building facades
- Field testing of filled-cavity wall systems
- Indoor air quality, healthy buildings, and breathing walls
- Methodology and design of field experiments for monitoring the hygrothermal performance of wood frame enclosures
- Moisture control in enclosure wall systems
- Moisture fundamentals and mould
- Moisture in buildings
- Moisture movement in building enclosure wall systems
- Overview of hygrothermal (HAM) analysis methods
- Pressure moderation and rain penetration control
- Rain control and screened wall systems
- Simplified prediction of driving rain deposition
- The influence of low-permeance vapor barriers on roof and wall performance
- The role of hygrothermal modeling in practical building design: case studies
- Vents, ventilation drying, and pressure moderation
- Straus, D. C.
- Stricker, S.
- Striegel, M. F.
- Strien, L. v.
- Strien, R. V.
- Strykowski, P. J.
- Stuart, I.
- Stuart, M. D.
- Stutzman, P. E.
- Stylianou, M.
- Stymne, H.
- Su, H. J.
- Su, Q.
- Su, W.
- Su, Y.
- Suard, F.
- Sudakin, D. L.
- Suffian, A.
- Suh, H. H.
- Sullivan, D. P.
- Sullivan, R. F.
- Suman, B. M.
- Sumathipala, K.
- Sumathy, K.
- Summerbell, R. C.
- Sun Ridge Group
- Sun, C.
- Sun, D.
- Sun, F.
- Sun, H.
- Sun, L. L.
- Sun, T.
- Sun, W.
- Sundell, B. J.
- Sundell, J.
- Sunesson, A. L.
- Sunessona, A.
- Sunikka, M.
- Sunyer, J.
- Suonketo, J.
- An approach to management of critical indoor air problems in school buildings
- Microbial growth in insulation of external walls: modeling the indoor air biocontamination sources
- Microbial growth inside insulated external walls as an indoor air biocontamination source
- The air flows and microbial contamination to indoor air from sandwich facade -- case study
- Supelco
- Surry, D.
- A study of mean pressure gradients, mean cavity pressures, and resulting residual mean pressures across a rainscreen for a representative building
- An experimental study of pressure gradients and their implications for the design of pressure-moderated rainscreens
- An exploratory study of the climatic relationships between rain and wind
- BLWT, CFD and HAM modelling vs. the real world: bridging the gaps with full-scale measurements
- Optimum vent locations for partially-pressurized rainscreens
- Simulation of wind-driven rain and wetting patterns on buildings
- Wind-driven rain study for the Governor's Road Project
- Suutari, M.
- Effect of growth medium on potential of Streptomyces anulatus spores to induce inflammatory responses and cytotoxicity in RAW264.7 macrophages
- Effect of liner and core materials of plasterboard on microbial growth, spore-induced inflammatory responses, and cytotoxicity in macrophages
- Induction of Cytotoxicity and Production of Inflammatory Mediators in RAW264.7 Macrophages by Spores Grown on Six Different Plasterboards
- Svendsen, S.
- Svennberg, K.
- Svensson, H. W. M.
- Swaffield, J. A.
- Swain, G. W.
- Swami, M.
- Swan, L. G.
- Swenson, C.
- Swenson, L. J.
- Swinton, M. C.
- Benchmarking of the advanced hygrothermal model hygIRC with mid scale experiments
- Defining climate regions as a basis for specifying requirements for precipitation protection for walls
- In-Situ performance evaluation of exterior insulation basement systems (EIBS) - spray polyurethane foam: summary report
- Three-dimensional analysis of thermal resistance of exterior basement insulation systems (EIBS)
- Syafaruddin
- Syd?nheimoa, L.
- Syed, A. M.
- Syrrakou, E.
- Szab¨®, M.
- Szponar, B.
- OAA
|| A-F || G-M || N | O | P | Q | R | S || T-Z ||
CRDBER, at CBS, BCEE, ENCS, Concordia,