- Gadgil, A. J.
- Comparing zonal and CFD model predictions of indoor airflows under mixed convection conditions to experimental data
- Comparing zonal and CFD model predictions of isothermal indoor airflows to experimental data
- Infiltration heat recovery in building walls: computational fluid dynamics investigations results
- Gadian, A.
- Gaglia, A. G.
- Gaines, T.
- Gajda, W. J.
- Galal, K.
- design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 2, ventilated concrete slab
- Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept
- Galasiu, A. D.
- Galbraith, G. H.
- Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures
- Moisture permeability data presented as a mathematical relationship
- Non-contact methods of measuring moisture concentration in external layers of building partitions. I--The influence of geometrical microstructure on the kinetics of moisture condensation on glass surfaces
- Nonisothermal moisture diffusion in porous building materials
- The application of X-ray absorption to building moisture transport studies
- The determination of vapour and liquid transport coefficients as input to combined heat mass transfer models
- The effect of temperature on the moisture permeability of building materials
- The influence of space discretization on the accuracy of numerical simulation of heat and moisture transport in porous building materials
- The selection of appropriate flow potentials for moisture transport models
- The use of differential permeabilty in moisture transport modelling
- Gallagher, J.
- Galleano, R.
- Gallo, F. M.
- Gallup, J.
- Gambale, W.
- Gams, W.
- Gan, G.
- Gana, G.
- Gangi, A.
- Gangloff, H.
- Ganguli, U.
- Gao, F. S.
- Gao, J.
- Gao, P.
- Gao, X.
- Garabrant, D.
- Garant, J.
- Garboczi, E. J.
- Garc¨ªa, J. C.
- Garcia, M. C. A.
- Garde, F.
- Garg, H. P.
- Garrett, M. H.
- Garrett, P. J.
- Gaspar, A. R.
- Gaspar, P. L.
- Gastaldi, M.
- Gates, D.
- Gatley, D. P.
- Gaur, R. C.
- Gawin, D. J.
- Gaylarde, C. C.
- Gaylarde, P. M.
- Gayo, E.
- Gazenko, S. V.
- Ge, H.
- Building Physics: 3rd International Conference in Building Physics
- Building pressurisation can affect possibility of mould growth
- Experimental study of temperature distributions across two curtain wall systems
- Measuring air leakage characteristics with flexible double air chambers
- Measuring air leakage of full-scale curtain wall sections using a non-rigid air-chamber method
- Study on overall thermal performance of metal curtain walls
- Study on thermal performance of curtain walls using infrared thermography
- Test method to measure the relative capacity of wall panels to evacuate moisture from their stud cavity
- Transfer of heat, moisture and air through metal curtain walls
- Ge, T. S.
- Gebasi, D.
- Gebremedhin, K. G.
- Gebski V.
- Gedik, G. Z.
- Geer, W.
- Geet, A. V.
- Geh, S.
- Gehring, U.
- Geisen, M.
- Geissler, S.
- Gencosmanoglu, A. B.
- George, J.
- Georgopoulou, E.
- Gerbasi, D.
- Gerdemeli, I.
- Gereda, J. E.
- Gerilla, G. P.
- Gero, J. S.
- Gershwin, M. E.
- Gertz, M.
- Geving, S.
- A systematic method for hygrothermal analysis of building constructions using computer models
- Hygrothermal analysis of building structures using computer models
- Measurements and two-dimensional computer simulations of the hygrothermal performance of a wood frame wall
- The drying potential and risk for mold growth in compact wood frame roofs with built-in moisture
- Ghaffarianhoseini, A.
- Ghaffarianhoseini, M.
- Ghaly, W. S.
- Ghandehari, H.
- Ghani, F.
- Ghannoum, M. A.
- Ghiaus, C.
- Ghosal, D.
- Gialanella, S.
- Gibb, A.
- Gibout, S.
- Comparison of different modelings of pure substances during melting in a DSC experiment
- Interpretation of calorimetry experiments to characterise phase change materials
- Inverse method for the identification of the enthalpy of phase change materials from calorimetry experiments
- Model for the DSC thermograms of the melting of ideal binary solutions
- On the use of a reduced model for the simulation of melting of solutions in DSC experiments
- Giddings, M.
- Gielen, D.
- Gigli, G.
- Gignac, M.
- Gilbert, D.
- Gilboa, E.
- Giles, H.
- Gilges, S.
- Gillespie, J. G.
- Gilman, A.
- Giner, M. M.
- Givri, J. R.
- Glasius, M.
- Glass, T. S. S.
- Glaumann, M.
- Glazer, J.
- Glicksman, L. R.
- Global Industry Analysts
- Globaltox, P.
- Globaltox, R.
- Godish, T.
- Goe, C. I. H. S.
- Goetzl, A.
- Goia, F.
- Goic, R.
- Gold, D. R.
- Goldberg, L. F.
- Goldstein, J.
- Goldstein, R. J.
- Gomes, M. G.
- Gong, D.
- Gong, J.
- Gonzalez, A. G.
- Gonz¨¢lez-fern¨¢ndez, C. F.
- Gonz¨¢lez-longatt, F. M.
- Goo, J.
- Goodhew, S.
- Goodman, M.
- Gordon, H. S.
- Gordon, R.
- Gordon, W. A.
- Gordona, S.
- Gorecki, T.
- G¨®recki, T.
- Gorlo, D.
- Application of solid-phase microextraction to monitoring indoor air quality
- Calibration procedure for solid phase microextraction - gas chromatographic analysis of organic vapours in air
- On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
- Gornes, J. A.
- G¨®rny, R.
- Gorny, R. L.
- Goto, E.
- Gots, R. E.
- Goudey, H.
- Fenestration of today and tomorrow: A state-of-the-art review and future research opportunities
- Highly insulating glazing systems using non-structural center glazing layers
- Key elements of and material performance targets for highly insulating window frames
- Surface temperatures of window specimens: infrared thermography laboratory measurements
- Goudreau, P.
- Goulart, A. G.
- Govan, D. P.
- Goverse, T.
- Gowreesunker, B. L.
- Gowri, K.
- Gracia, A.
- Graham, P.
- Granada, E.
- Granger, R. H.
- Granqvist, C. G.
- Angular selective window coatings: theory and experiments
- Oxide electrochromics: An introduction to devices and materials
- Oxide electrochromics: Why, how, and whither
- Recent advances in electrochromics for smart windows applications
- Transparent conductors as solar energy materials: A panoramic review,
- Grant, A. D.
- Grant, C.
- Gratia, E.
- Grattan, K. T. V.
- Grau, K.
- Model and experiments for hygrothermal conditions of the envelope and indoor air of buildings
- Moisture buffering and its consequence in whole building hygrothermal modeling
- Numerical method for calculating latent heat storage in constructions containing phase change material
- The importance of moisture buffering for indoor climate and energy conditions of buildings
- Whole-building Hygrothermal Simulation Model
- Graves, H. M.
- Gravesen, S.
- Determination of fungal spore release from wet building materials
- Microbiology on indoor air'99- what is new and interesting? an overview of selected papers presented in Edinburgh, August, 1999
- Microfungal contamination of damp buildings - examples of risk constructions and risk materials
- Microfungal contamination of damp buildings: Biological aspects
- Production of mycotoxins on artificially and naturally infested building materials
- Production of mycotoxins on artificially inoculated building materials
- Symptoms associated to work in a water damaged school building
- The Danish Research Programme: "moulds in Buildings" 1998-2001
- The release of fungal spores from water damaged building materials
- Gray, M. R.
- Grayson, J. M.
- Graziani, M.
- Grazzini, G.
- Greatorex, A. R.
- Green, S.
- Greenhalgh, R.
- Greenwell, D. J.
- Greest, M. C. H.
- Gregg, S. J.
- Grieser, J.
- Griffin, D. M.
- Griffin, J. R.
- Griffith, B. T.
- Assessment of the technical potential for achieving net zero-energy buildings in the commercial sector
- Contrasting the capabilities of building energy performance simulation programs
- Framework for coupling room air models to heat balance model load and energy calculations (RP-1222)
- Gas-filled panels: an update on applications in the building thermal envelope
- Issues associated with the use of infrared thermography for experimental testing of insulated systems
- Laboratory procedures for using infrared thermography to validate heat transfer models
- Surface temperatures of insulated glazing units: infrared thermography laboratory measurements
- Surface temperatures of window specimens: infrared thermography laboratory measurements
- Griffiths, R.
- Griffiths, W. D.
- Grillot, R.
- Grimard, Y.
- Grimsrud, D. T.
- Grinshpun, R. T.
- Grinshpun, S. A.
- Aerodynamic versus physical size of spores: measurement and implication for respiratory deposition
- Aerosol characteristics of airborne actinomycetes and fungi
- Bioaerosol collection by a new electrostatic precipitator
- Characteristics of airborne actinomycete spores
- Collection of airborne microorganisms by a new electrostatic precipitator
- Collection of airborne spores by circular single-stage impactors with small jet-to-plate distance
- Collection of bioaerosol particles by impaction: effect of fungal spore agglomeration and bounce
- Collection of fungal spores on air filters and spore reentrainment from filters into air
- Development and evaluation of aerosol generators for biological materials
- Effect of impact stress on microbial recovery on an agar surface
- Effect of relative humidity on the aerodynamic diameter and respiratory deposition of fungal spores
- Evaluation of a new personal sampler for enumerating airborne spores
- Field Testing of New Aerosol Sampling Method With a Porous Curved Surface as Inlet
- Fungal fragments as indoor air biocontaminants
- Fungal spore source strength tester: laboratory evaluation of a new concept
- Improved aerosol collection by combined impaction and centrifugal motion
- Inlet sampling efficiency of bioaerosol samplers
- Long-term sampling of airbome bacteria and fungi into a non-evaporating liquid
- Performance characteristics of the button personal inhalable aerosol sampler
- Performance of Air-O-Cell, Burkard, and Button samplers for total enumeration of airborne spores
- Release of lead-containing particles from a wall enclosure
- Release of Streptomyces albus propagules from contaminated surfaces
- Techniques for dispersion of microorganisms into air
- Grinzato, E. G.
- Gritti, T.
- Grobler, L. J.
- Groenewegen, M. P. H.
- Gronbaek, D. J. v. H.
- Gr?nlundb, R.
- Grot, R. A.
- Grozman, P.
- Grun, L.
- Grunewald, H.
- Grunewald, J.
- A two-levelled hygrothermal material database for the numerical simulation program DELPHIN4
- Documentation of the Numerical Simulation Program DIM3.1, Volume 1: Theoretical Fundamentals
- Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures
- Modified cup for testing of water vapour transmission through thick, permeable materials
- Numerical and experimental investigation of coupled heat and moisture transport problems
- On the hysteresis in moisture storage and conductivity measured by the instantaneous profile method
- Position paper on material characterization and HAM model benchmarking
- Towards an engineering model of material characteristics for input to ham transport simulations - Part 1: an approach
- Grynning, S.
- Gu, H.
- Gu, L.
- Combined heat and moisture transfer in buildings and structures
- Predicting psychrometric conditions in biocontaminant microenvironments with a microclimate heat and moisture transfer model - description and field comparison
- Simulation of combined heat moisture and contaminant transport in building science problems
- Guana, L.
- Guardia, C. D.
- Gudmundsson, K.
- Gudum, C.
- Guest, D.
- Gueymard, C. A.
- Guhs, S.
- Guigas, M.
- Guit¨¦, P.
- Gulay, G. W.
- Gunerhan, H.
- Gunnarsen, L.
- Gunnarsson, A. G.
- Gunnewiek, L.
- Guo, F.
- Guo, J.
- Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures
- Moisture permeability data presented as a mathematical relationship
- The effect of temperature on the moisture permeability of building materials
- The selection of appropriate flow potentials for moisture transport models
- The use of differential permeabilty in moisture transport modelling
- Guo, Z.
- Gupta, R.
- Gupta-bhattachary, S.
- Gupta-bhattacharya, S.
- Gurevich, M. S.
- Gurung, N.
- Gusdorf, J.
- Gustavsen, A.
- Aerogel insulation for building applications: A state-of-the-art review
- Fenestration of today and tomorrow: A state-of-the-art review and future research opportunities
- Gas-filled panels for building applications: A state-of-the-art review
- Key elements of and material performance targets for highly insulating window frames
- Phase change materials for building applications: A state-of-the-art review
- Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: A state-of-the-art review
- State-of-the-art highly insulating window frames -- research and market review
- Vacuum insulation panels for building applications: A review and beyond
- Gustavson, M.
- Gustavsson, L.
- Carbon dioxide balance of wood substitution: Comparing concrete- and wood-framed buildings
- Greenhouse gas balances in building construction: wood versus concrete from life-cycle and forest land-use perspectives
- Variability in energy and carbon dioxide balances of wood and concrete building materials
- Gustitus, D. A.
- Gutarowsk, B.
- Gutarowska, B.
- Guths, S.
- Gwilliama, J.
- Gyntelberg, F.
- H, D. D.
- Haahtela, T.
- Haapio, A.
- Haas, A.
- H?berling, P.
- Hacek, D. M.
- Hachem, C.
- Hackera, J. N.
- Haddad, L.
- Hadipriono, F.
- Hadjab, M.
- Hadjisophocleous, G.
- Hadjisophocleousb, G.
- Hadley, J. G.
- Hadlich, D. E.
- Haeulp, P.
- Haeupl, P.
- Hafner, B.
- Hagentoft, C. E.
- A numerical method for calculating combined heat, air and moisture transport in building envelope components
- A numerically stable algorithm for simplified calculations of combined heat, air and moisture transport
- An algorithm to accelerate simulations of simulataneous heat and gas transfer in gas-filled foams
- An example of application of limit state approach for reliability analysis of moisture performance of a building component
- Assessment method of numerical prediction models for combined heat, air and moisture transfer in building components: benchmarks for one-dimensional cases
- Combined Heat, Air, and Moisture Transport in Loose-Filled Insulation - Experiment and Simulation
- Durability control by means of hygrothermal history in building components
- International building physics toolbox, general report
- Moisture conditions in a north-facing wall with cellulos loose-fill insulation: construction with and without a vapor retarder and air leakage
- Prediction of driving rain intensities using potential flows
- Simulink modelling tool for HAM system analyses in building physics
- The International Building Physics Toolbox in Simulink
- H?gerh, L.
- Haghighat-, E. A. F.
- Haghighat, F.
- An integrated zonal model for predicting transient VOC distribution in a ventilated room
- An integrated zonal model to predict transient indoor humidity distribution
- Assessing long-term performance of centralized thermal energy storage system
- Best Practice for Architects and Engineers
- Centralized latent heat thermal energy storage system: Model development and validation
- Designing building envelope with PCM wallboards: Design tool development
- Energy-Storing Wallboard: Flammability Tests
- Final Report, IEA, annex 23, applying energy storage in buildings of the future
- Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
- Modeling moisture accumulation in multi-layered building materials, MODELING MOISTURE IN RESIDENTIAL BUILDINGS WITH A MULTIZONE IAQ PROGRAM
- Modeling of phase change materials for applications in whole building simulation
- Modelling of volatile organic compounds emission from dry building materials
- Modified cup for testing of water vapour transmission through thick, permeable materials
- Optimization of ventilation system design and operation in office environment
- Zonal Models for Indoor Air Flow - A Critical Review
- Haghighata, F.
- Hagman, O.
- Haillot, D.
- Haisley, P. D.
- H?kansson, H.
- Hakkaki-fard, ,.
- Hakkarainen, H.
- Haldane, D.
- Hall, C.
- Hall, J. W.
- Halla-aho, J.
- Hallier, E.
- H?llstr?ma, J.
- Halsall, P.
- Halsey, J. F.
- Halton, D.
- Hameria, K. H.
- Hameury S.
- Hameury, S.
- Hamidi, A.
- Hamlin, T.
- Hammad, A.
- Hammad, F.
- Hammarberg, E.
- Hammel, K. E.
- Hammouti, M.
- Hamza, N.
- Han, J.
- Effect of fluid flow and packing factor on energy performance of a wall-mounted hybrid photovoltaic/water-heating collector system
- Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer fa?ade,
- Thermal behavior of a novel type see-through glazing system with integrated PV cells
- Hand, J. W.
- Handegord, G. O.
- Handegord, O.
- Hangan, H.
- Hanhijarvi, A.
- Hanninen, O.
- Hansen, A. T.
- Hansen, E. J. d. P.
- Hansen, K. K.
- Experimental investigation of the hygrothermal performance of insulation materials
- Moisture Buffer Value of Materials in Buildings
- Non-isothermal water vapour transmission through porous insulation. Part 1: The climate chamber
- Results of a water vapor transmission round-robin test using cup methods
- Sorption isotherms - a catalogues
- Sorption isotherms: a catalog and a data base
- Hansen, M. H.
- Building-related symptoms and molds: a two-step intervention study
- Health evaluation of volatile organic compound (VOC) emissions from wood and wood-based materials
- Measuring moisture content in wood with built in probes 20+ years experience
- Moisture in combined concrete timber-frame walls without vapour barrier
- Numerical method for calculating latent heat storage in constructions containing phase change material
- On the influence of cavity ventilation on moisture content in timber frame walls
- Protection of wood by design
- Symptoms associated to work in a water damaged school building
- TDR measurement of moisture content in aerated concrete
- Hansson, R. C.
- Hanzawa, H.
- Haq, M. A.
- Hara, T.
- Harderup, E.
- Estimation of risk of high moisture conditions in an external wall
- Moisture conditions at the outer surface of constructions with negligible heat and moisture capacity
- Moisture conditions in a north-facing wall with cellulos loose-fill insulation: construction with and without a vapor retarder and air leakage
- Moisture control in buildings - how can varying outdoor climate be allowed for?
- Harderup, L.
- Hardin, B. D.
- Hargis, P. J.
- Hargreaves, M.
- Harikrishnan, S.
- Harkness, E. L.
- Harlow, F. H.
- Harney, J.
- Harpel, S.
- Harri, M.
- Harriman, L. G.
- Harris, I.
- Harris, J.
- Harris, P. M.
- Harrison, R. M.
- Harrison, S. J.
- A Reference heat source for solar collector thermal testing
- Determination of Window Thermal Characteristics Using a Solar Simulator Based Test Method
- Evaluation of solar heat gain coefficient for solar-control glazings and shading devices
- Queen's university solar calorimeter ¨C design, calibration, and operating procedure
- Queen's university solar calorimeter ¨C design, calibration, and operating procedure
- Harssema, H.
- Hart, R.
- Hartkopf, V.
- Hasan, A.
- Hasegawa, K.
- Haslam, P. J.
- Hassan, F.
- Hassan, M. I.
- Hassan, O. A. B.
- Hassan, S. H.
- Hassanain, M. A.
- Hassanein, A.
- Hassler, U.
- Hauck, B. C.
- Hauglustaine, J. M.
- Haupl, P.
- H?upl, P.
- Hausner, R.
- Haverinen, U.
- An approach to management of critical indoor air problems in school buildings
- Analysis of moisture findings in the interior spaces of Finnish housing stock
- Characteristics of moisture damage in houses and their association with self-reported symptoms of the occupants
- Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
- Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
- Modeling moisture damage and its association with occupant health symptoms
- Haves, P.
- Havesb, P.
- Hawes, D.
- Hawisa, J. S.
- Hawken, P.
- Hazleden, D. G.
- Hazlen, D. G.
- He, C.
- He, H. S.
- He, W.
- Comparative experiment study on photovoltaic and thermal solar system under natural circulation of water
- Effect of fluid flow and packing factor on energy performance of a wall-mounted hybrid photovoltaic/water-heating collector system
- Performance evaluation of a PV ventilated window applying to office building of Hong Kong
- He, Z.
- Health Council
- Healy, J. D. K.
- Healy, W. M.
- A preliminary investigation on the use of ultra-wideband radar for moisture detection in building envelopes
- Moisture Sensor Technology: A Summary of Techniques for Measuring Moisture Levels in Building Envelopes
- Wireless sensor networks as part of a web-based building environmental monitoring system
- Heath, F. M. a.
- Heaton, P. E.
- Heberlein, J. V. R.
- Hedenblad, G.
- Heffernan, V.
- Hegazy, T.
- Hegedys, H.
- Hegger, M
- Heidel, T. D.
- Heikkinen, I.
- Heilemann, K. J.
- Heim, D.
- Heinemanna, U.
- Heinonen-tanski, H.
- Heinrich, J.
- Heinsohn, P. A.
- Heiselberg, .
- Heiselberg, P.
- Held, H.
- Helenius, H.
- Hellinga, H.
- Helmke, C.
- Hemminki, K.
- Hendrickson, S.
- Hendriks, L.
- Henemann, A.
- Hennebert, G. L.
- Henriques, A. A.
- Henriquez, J. R.
- Henr¨ªquez, V. I.
- Hens, H.
- A comparison of different techniques to quantify moisture content profiles in porous building materials
- Application of a new type of air and vapor retarder in a self-drying sloped roof with a cathedral ceiling
- Building envelopes in a holistic perspective
- Condensation risk assessment
- Determination of the liquid water diffusivity from transient moisture transfer experiments
- Evaluating the thermal performance of active envelopes
- Fungal defacement in buildings: a performance related approach
- Heat and moisture response of vented and compact cathedral ceilings: a test house evaluation
- Heat, air and moisture transfer in insulated envelope parts. Final Report, Volume 1, Modelling
- Heat-air-moisture design of masonry cavity walls: theoretical and experimental results and practice
- Hygric properties of a new humidity controlled vapor retarder
- IEA Annex 14: Condensation and Energy
- Inquiry on HAMCAT codes
- Interstitial condensation due to air leakage: a sensitivity analysis
- Microscopic analysis of imbibition processes in oolitic limestone
- Modeling. Final Report
- Performance prediction for masonry walls with EIFS using calculation procedures and laboratory testing
- Performance-based development of a thermally insulated pitched roof system
- Pitched roofs, heat-air-moisture transport in tiled and slated roofs with the thermal insulation at rafter level
- Simulating non-isothermal water vapour transfer: an experimental validation on multi-layered building components
- The influence of soil moisture in the unsaturated zone on the heat loss from buildings via the ground
- Hens, J.
- Hensen, J.
- A view of energy and building performance simulation at the start of the third millennium
- Building Simulation '99. Proceedings of the 6th International IBPSA Conference, (Editors)
- Integrated building simulation: state-of-the-art, Introducing Building Energy Simulation Classes on the Web
- Introducing building energy simulation classes on the web
- On the use of simulation in the design of embedded energy systems
- Past, present and future plans of the International Building Performance Simulation Association -- IBPSA
- Research and development in The Netherlands in the area of Building Performance Simulation
- Simulation for better building design
- Simulation of building energy and indoor environmental quality - some weather data issues
- Validation of external BES-CFD coupling by inter-model comparison
- Henson, J.
- Henze, G. P.
- Hepbasli, A.
- Herbarth, O.
- How do the indoor size distributions of airborne submicron and ultrafine particles in the absence of significant indoor sources depend on outdoor distributions?
- Increased incidence of allergic sensitisation and respiratory diseases due to mould exposure: Results of the Leipzig Allergy Risk children Study (LARS)
- Herde, A.D.
- Hernandez, M. T.
- Hernandez, P.
- Hern¨¢ndez-p¨¦rez, I.
- Herr, C.
- Herrador, M. A.
- Herzog, L.
- Herzog, T.
- Hewett, S.
- Hewings, J.
- Hewitt, N.
- Hidalgo, A.
- Higgins, K. M.
- Highley, T. L.
- Highsmith, V. R.
- Hilfer, R.
- Hill, D.
- Hill, R. R.
- Hill, S. D.
- Hill, T.
- Hines, C.
- Hinks, J.
- Hintikka, E.
- HIP
- Hircock, M.
- Hirsch, S. R.
- Hirunlabh, J.
- Hirvonen, M.
- Effect of growth medium on potential of Streptomyces anulatus spores to induce inflammatory responses and cytotoxicity in RAW264.7 macrophages
- Effect of liner and core materials of plasterboard on microbial growth, spore-induced inflammatory responses, and cytotoxicity in macrophages
- Fungal spores as such do not cause nasal inflammation in mold exposure
- Induction of Cytotoxicity and Production of Inflammatory Mediators in RAW264.7 Macrophages by Spores Grown on Six Different Plasterboards
- Inflammatory potential of the spores of Penicillium spinulosum isolated from indoor air of a moisture-damaged building in mouse lungs
- Hitchin, E. R.
- Hitchins, J.
- Hjelm, A.
- Hjort, S. G.
- HM Government.
- Hoa, J.
- Hoanga, M. L.
- Hobbs, M. Y.
- Hodgson, A. T.
- Hodgson, M. J.
- Hodson, H. P.
- Hoek, G.
- Hoernel, J.
- Hoffmeyer, P.
- Hofman, K.
- H?gberg, A. B.
- Hogg, W. D.
- Hohota, R.
- Hokao, K.
- Holland, S. D.
- Hollands, K. G.
- Hollick, J.
- Holm, A.
- An educational hygrothermal model: WUFI-ORNL/IBP
- Combined effect of temperature and humidity of the detoriation process of insulation materials in ETICS
- Determination of moisture and salt content distributions by combining NMR and gamma ray measurements
- Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
- Moisture buffering effects of interior linings made from wood or wood based products
- Moisture-buffering effect - experimental investigations and validation
- Non-isothermal moisture transfer in porous building materials
- Position paper on material characterization and HAM model benchmarking
- Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
- Previous Experimental Studies and Field Measurements on Moisture Buffering by Indoor Surface Materials
- Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope
- Stochastic building envelope modeling -- the influence of material properties
- The hygrothermal behaviour of rooms: combining thermal building simulation and hygrothermal envelope calculation
- Two-dimensional transient heat and moisture simulations of rising damp with WUFI 2D
- Uncertainty approaches for hygrothermal building simulations - drying of an AAC flat roof in different climates
- Uncertainty of hygrothermal calculations
- Holm, G.
- Holman, J. P.
- Holme, J.
- Holmes, E. R.
- Holmes, L. D.
- Holmes, M. J.
- Holt, G. D.
- Holton, J. K.
- Hong, J.
- Hong, T.
- Hoof, J. v.
- Hooper, B. M.
- Hooper, M. A.
- Hordijk, T.
- Horman, M. J.
- Horne, M.
- Horner, E.
- Horner, W. E.
- Horvat, M.
- Horwood, J.
- Hoskova, S.
- Hosni, M. H.
- Hou, Z.
- House, J. M.
- Houvenaghel, G.
- Howard, E. M.
- Howard, J. L.
- Howell, C. R.
- Howell, G.
- Howell, J. F.
- Hraska, J.
- Hryhorczuk, D.
- Hsieh, J.
- Hsu, S.
- Hu, J.
- Huang, B.
- Huang, D.
- Huang, H.
- Huang, J.
- Huang, M. J.
- Huang, N. Y.
- Huang, Y.
- Huanga, Y.
- Hubbs, B.
- Hubert, J.
- Hudson, E.
- Huelman, P. H.
- Huete, A. R.
- Hughes, M. D.
- Hughson, W. G.
- HUI, S.C.M.
- Hukka, A.
- Hull, M. C.
- Hult, M.
- Humphreys, M. A.
- Hung, W.
- Hunter, A. J.
- Hunter, C. A.
- Hunter, J. S.
- Hunter, W. G.
- Hunzel, H. M.
- Huovila, P.
- Hurley, W. G.
- Hurt, R.
- Hus, M.
- Husemoen, T.
- Husman, T.
- An approach to management of critical indoor air problems in school buildings
- Analysis of moisture findings in the interior spaces of Finnish housing stock
- Characteristics of moisture damage in houses and their association with self-reported symptoms of the occupants
- Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
- Control of exposure to airborne viable microorganisms during remediation of moldy buildings; report of three case studies
- Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
- Health effects of indoor-air microorganisms
- Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
- Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
- Moisture damage in schools - symptoms and indoor air microbes
- Moisture, mold and health in apartment homes
- Size distributions of airborne microbes in moisture-damaged and reference school buildings of two construction types
- The relationship between moisture or mould observations in houses and the state of health of their occupants
- Hussain, M. M.
- Hussein, R.
- Husseina, T.
- Hussey, J. R.
- Hussin, F.
- Hutcheon, N. B.
- Hutchinson, M.
- Huuhtanen, P.
- Huxham, M.
- Hyde, R.
- Hyde, T. J.
- Hylton, J. O.
- Hynd, B. P. J. a.
- Hyndman, S.
- Hyvarinen, A.
- An approach to management of critical indoor air problems in school buildings
- Comparison of concentrations and size distributions of fungal spores in buildings with and without mould problems
- Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
- Fungi and actinobacteria in moisture-damaged building materials - concentrations and diversity
- Size distributions of airborne microbes in moisture-damaged and reference school buildings of two construction types
- Temporal and spatial variation of fungal concentrations in indoor air
- Hyv?rinen, A.
- Characterizing moisture damaged buildings - environmental and biological monitoring
- Fungi in moisture-damaged building materials
- Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
- Isolation and identification of Aspergillus fumigatus mycotoxins on growth medium and some building materials
- Moisture, mold and health in apartment homes
- Hyv?rinen, M.
- Hyv?rinena, A.
- Iacobescu, F.
- Iano, O.
- Ibanez, M.
- Ibearugbulem, O. M.
- Ibele, W. E.
- IBHS
- Ibos, L.
- Ibrahim, A.
- Ibrahim, N. L. N.
- ICC
- IEA
- IEA PVPS
- IEA/AIE, Blanchard, S. and Reppe, P.
- IEA-PVPS
- Iera, A.
- Iguchi, K.
- IICRC
- III, S.
- Ikuma, L. H.
- Iliescu, S.
- Il''inskii, M.
- Ilozor, B.
- Imbabi, M. S.
- Immonen, J.
- Impacts
- Imrak, C. E.
- Inard, C.
- Inc, F.
- Inculet, D.
- Industries, S.
- Industry Canada
- Industry, P. t. U. S. C.
- Infraspection Institute
- Ingeli, R.
- I?igo, A. C.
- Iniyan, S.
- Inoue, M.
- INSPQ
- Institute for Research in Construction / National Research Council Canada
- International Energy Agency
- International Wood Markets Research Inc
- IPCC
- IRC/NRC
- IRCC
- Irdi, G. A.
- IRENA
- Isaacs, N.
- Isack, F.
- Isaksson, C.
- Isaksson, T.
- Isbell, M. A.
- Ishaque, K.
- A comprehensive MATLAB Simulink PV system simulator with partial shading capability based on two-diode model
- A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model
- An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE)
- Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model
- Ishigami, Y.
- ISIAQ
- Iskakov, K. T.
- Iskra, C. R.
- Islam, M. R.
- Ismail, K. A. R.
- ISO
- Guide to the expression of uncertainty in measurement
- ISO 12570: Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature
- ISO 9972, Thermal insulation -- Determination of building airtightness -- Fan pressurization method
- ISO/IEC Guide 98-3/Supplement 1, Propagation of distributions using a Monte Carlo method
- Issa, C. A.
- Ito, K.
- Iversen, R.
- Iwaro, J.
- Jaakkola, J. J. K.
- Jaaskelainen, E.
- Jack, L. B.
- Jackson, J. D.
- Jacob, B.
- Jacob, T. R.
- Jacobs, R. R.
- Jacobsen, B.
- Jacobsen, R. T.
- Jagadish, K. S. J.
- J?ger-waldau, A.
- Jaillon, L.
- Jain, P. C.
- Jalocon, A.
- James, P. A. B.
- James, W. L.
- Jamison, J. B.
- Jamriska, M.
- J?ms?, S.
- Janabi-sharifi, F.
- Janak, M.
- Jang, W.
- Janinska, B.
- Jankowska, E.
- Jankun, T. M.
- Comparisons of seasonal fungal prevalence in indoor and outdoor air and in house dusts of dwellings in one Northeast American county
- Dustborne Alternaria alternata antigens in US homes: results from the National Survey of Lead and Allergens in Housing
- The relation between fungal propagules in indoor air and home characteristics
- Jannasch, P.
- Janson, C.
- Janssen, H.
- A comparison of the Nordtest and Japanese test methods for the moisture buffering performance of building materials
- Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation
- Impact, absorption and evaporation of raindrops on building facades
- In situ determination of the moisture buffer potential of room enclosures
- Qualitative and quantitative assessment of interior moisture buffering by enclosures
- The influence of soil moisture in the unsaturated zone on the heat loss from buildings via the ground
- The influence of soil moisture transfer on building heat loss via the ground
- Wind-driven rain as a boundary condition for HAM simulations: Analysis of simplified modelling approaches
- Janssen, N. A. H.
- Janssens, A.
- Application of a new type of air and vapor retarder in a self-drying sloped roof with a cathedral ceiling
- Benchmark experiments for moisture transfer modelling in air and porous materials
- CFD modelling of HAM transport in buildings: The importance of local indoor climate
- Condensation risk assessment
- Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage
- Evaluation of the different definitions of the convective mass transfer coefficient for water evaporation into air
- Experimental validation and sensitivity analysis of a coupled BES-HAM model
- Heat and moisture response of vented and compact cathedral ceilings: a test house evaluation
- Impact of whole-building hygrothermal modelling on the assessment of indoor climate in a library building
- Inquiry on HAMCAT codes
- Modelling indoor air and hygrothermal wall interaction in building simulation: Comparison between CFD and a well-mixed zonal model
- On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model
- On the applicability of the heat and mass transfer analogy in indoor air flows
- Reliable control of interstitial condensation in lightweight roof systems, calculation and assessment methods
- Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling
- Jantunen, M. J.
- Air pollution exposure in European cities: The "EXPOLIS" study
- Fungal microcolonies on indoor surfaces an explanation for the base-level fungal spore counts in indoor air
- Occurrence and moisture requirements of microbial growth in building materials
- Significance of air humidity and air velocity for fungal spore release into the air
- Temporal and spatial variation of fungal concentrations in indoor air
- Jantunena, M.
- Janz, M.
- Measurement of the moisture storage capacity using sorption balance and pressure extractors
- Methods of measuring the moisture diffusivity at high moisture levels
- Moisture transport and fixation in porous materials at high moisture levels
- Technique for measuring moisture storage capacity at high moisture levels
- Test of Four Different Experimental Methods to Determine Sorption Isotherms
- Jaques, R.
- Jaramillo, O. A.
- J?rvholm, B.
- Jarvis, B. B.
- Jarvis, D.
- Jarvis, J.
- Jastrzbska, A.
- Jastrzebska, A.
- Jaszek, A.
- Jaworski, M.
- Jay, A.
- Jazayeri, S.
- JCHS
- Jean, G.
- Jefferson, M.
- Jefferson, T.
- Jelle, B. P.
- Aerogel insulation for building applications: A state-of-the-art review
- Gas-filled panels for building applications: A state-of-the-art review
- Key elements of and material performance targets for highly insulating window frames
- Large-scale experimental wind-driven rain exposure investigations of building integrated photovoltaics
- Phase change materials for building applications: A state-of-the-art review
- Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: A state-of-the-art review
- State-of-the-art highly insulating window frames -- research and market review
- The path to the building integrated photovoltaics of tomorrow
- Vacuum insulation panels for building applications: A review and beyond
- Jelle, P.
- Jeng, C. J.
- Jenkins, L. C.
- Jenkins, P.
- Jensen, H. L. C.
- Jensen, K. A.
- Jensen, L. K.
- Jensen, P. A.
- Jentsch, M. F.
- Jeong, J.
- Jermann, E.
- Jernberg, P.
- Jeronimidis, G.
- Jesensk¨¢, M. Z.
- Jeter, S. M.
- JF Burrows Consulting
- Ji, J.
- Jia, M. Y.
- Jianga, J.
- Jim¨¦nez, M. J.
- Jin, X.
- Jirickov¨¢, M.
- JIS
- Jo, J. H.
- Joel Makower and the editors of GreenBiz.com
- Johannes, K.
- A review on phase change materials integrated in building walls
- Interpretation of calorimetry experiments to characterise phase change materials
- Modeling phase change materials behavior in building applications: Comments on material characterization and model validation
- One dimensional benchmark based on PCM
- Johannesson, B.
- Mathematics of the discrete fourier transform (DFT) with audio applications--second edition
- Restrictions on the rate of absorption when evaluating sorption isotherms obtained using a micro-calorimetric technique
- Test of Four Different Experimental Methods to Determine Sorption Isotherms
- Transport and sorption phenomena in concrete and other porous media
- Johanning, C.
- Johanning, E.
- Johansson, J.
- Johansson, P.
- John, G.
- Johnson, C. D.
- Johnson, D.
- Johnson, H. E.
- Johnson, P.
- Johnson, S. H.
- Johnsson, H.
- Johnsson, T.
- Johnstone, C. M.
- A technique for the prediction of the conditions leading to mould growth in buildings
- Development of a simulation tool for mould growth prediction in buildings
- On the use of simulation in the design of embedded energy systems
- Prediction of toxigenic fungal growth in buildings by using a novel modelling system
- Jolliffe, I. T.
- Jones, A. S.
- Jones, E.
- Jones, J. R.
- Jones, P. E.
- Jones, S. K.
- Jonesa, P.
- Jong, A. G.
- Jordan, B. A.
- J?rgensen, F.
- Joshi, S. P.
- Joulin, A.
- Jouni, R.
- Juadines, M.
- Juanes, F.
- Jubayer, C. M.
- Judkoff, R.
- Jumper, C. A.
- Jung, J.
- Juozaitis, A.
- Jussila, J.
- Justnes, H.
- Juutinen, T.
- K, S.
- Kaariainen, H.
- Kabanikhin, S. I.
- K?hk?nen, E.
- Kaihotsu, I.
- Kaivo-oja, J.
- Kakela, P.
- K?kel?, P.
- Kakizawa, Y.
- Kalagasidis, A. S.
- Assessment of hygrothermal performance and mould growth risk in ventilated attics in respect to possible climate changes in Sweden
- International building physics toolbox, general report
- Simulink modelling tool for HAM system analyses in building physics
- The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings
- Kalagasidis, S. A.
- Kalagasidisa, A. S.
- Kalaiselvam, S.
- Kalaitzakis, K.
- Kalamees, T.
- Estonian climate analysis for selecting moisture reference years for hygrothermal calculations
- Hygrothermal calculations and laboratory tests on timber-framed wall structures
- Hygrothermal criteria for design and simulation of buildings
- Indoor humidity loads and moisture production in lightweight timber-frame detached houses
- Principles to analyze the moisture performance of timber-framed external wall assembly due to diffusion
- The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings
- The effects of ventilation systems and building fabric on the stability of indoor temperature and humidity in Finnish detached houses
- K?llblad, K.
- Kalliokoski, P.
- Control of exposure to airborne viable microorganisms during remediation of moldy buildings; report of three case studies
- Effect of duct-cleaning detergents and disinfection substances on mould growth
- Ergosterol content in various fungal species and biocontaminated building materials
- Fungal microcolonies on indoor surfaces an explanation for the base-level fungal spore counts in indoor air
- Moisture conditions and fungi in wood and wood based material samples collected from damp buildings
- Significance of air humidity and air velocity for fungal spore release into the air
- Kalliokoskia, P.
- Kalogirou, S. A.
- Kalousek, M.
- Kaloyanov, N. G.
- Kalso, S.
- Kaminski, D.
- Kamotob, D.
- Kang, H.
- Kang, K. H.
- Kapsis, K.
- Kar, B. P.
- Karabiber, Z.
- Karagiozis, A. N.
- A North American research approach to moisture design by modeling
- Advanced hygrothermal modeling of building materials using MOISTURE-EXPERT 1.0
- Advanced hygrothermal models and design models
- An educational hygrothermal model: WUFI-ORNL/IBP
- Applied moisture engineering
- Barrier EIFS clad walls: Results from a moisture engineering study
- Boundary element analysis of uncoupled quasi-static hygrothermoelasticity for two-dimensional composite walls
- Building enclosure hygrothermal performance study phase I
- Drying capabilities of wood frame walls with wood siding
- EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
- Hygrothermal system-performance of a whole building
- Importance of moisture control in building performance
- Influence of material properties on the hygrothermal performance of a high-rise residential wall
- Integrated approaches for moisture analysis
- Integrated hygrothermal performance of building envelopes and systems
- Measurements and two-dimensional computer simulations of the hygrothermal performance of a wood frame wall
- Moisture transport in building envelopes using an approximate factorization solution method
- Position paper on material characterization and HAM model benchmarking
- Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope
- Wind-driven rain distributions on two buildings
- WUFI-ORNL/IBP - A North American Hygrothermal Mode
- Karakaya, E.
- Karamana, S.
- Karava, P.
- Experimental study of the thermal performance of a large institutional building with mixed-mode cooling and hybrid ventilation
- Model predictive control strategies for buildings with mixed-mode cooling
- Numerical modelling of forced convective heat transfer from the inclined windward roof of an isolated low-rise building with application to photovoltaic/thermal systems
- Simulation of fa?ade and envelope design options for a new institutional building
- Karim, K.
- Karim, N. A.
- K?rki, R.
- Karkri, M.
- Karl, T.
- Karlsson, B.
- Karlsson, F.
- Karoglou, M.
- Karr, G. R.
- Kartal, S. N.
- Karttunen, R.
- Kasanen, A. L.
- Kasanen, J. P.
- Kasanena, J.
- Kashihara, S.
- Kashiwagi, T.
- Kassomenos, P.
- Kato, S.
- Kats, G.
- Katsenelenbogen, S.
- Katsiris, I.
- Katsman, R.
- Katsouyanni, K.
- Katz, A.
- Katz, M.
- Kauhanen, E.
- Kauppinen, T.
- Kauri, T.
- Kaushik, S. C.
- Kayll, D. G.
- Kaynakli, O.
- Keener, H. M.
- Kehrer, M.
- Keil, U.
- Keller, H. S. R.
- Keller, R.
- Kelley, S. J.
- Kelly, D.
- Kelly, G.
- Kelly, K. M.
- Kelly, N. J.
- A technique for the prediction of the conditions leading to mould growth in buildings
- Development of a simulation tool for mould growth prediction in buildings
- Towards a design environment for buildingintegrated energy systems: the integration of electrical power flow modelling with building simulation
- Kelman, B. J.
- Kemery, B. P.
- Kendrick, B.
- Kenny, P.
- Kent, C. A.
- Kent, D.
- Keranen, E.
- Kerem, Z.
- Kerestecioglu, A.
- Kern, E. C.
- Kesik, T.
- Keski-karhu, J.
- Kessel, W.
- Kessentini, H.
- Kesti, J.
- Kevan, P. G.
- Khalil, M.
- Khalil, S. A.
- Khan, J. A.
- Khan, N.
- Kharin, V. M.
- Khedari, J.
- Khitrina, L. Y.
- Khudhair, A.
- Kiefer, M. J.
- Kieper, G. W. C.
- Kiessl, K.
- Kildes?, J.
- Kildes?, P. K.
- Kilpelainen, M.
- Kim, C. S.
- Kim, H. K.
- Kim, J. K.
- Kim, K. W.
- Kim, S.
- Kim, Y.
- Kimura, K.
- Kimura, S.
- Kindembe, B.
- Kindzierski, W. B.
- King, B.
- King, J. B.
- Kintner-meyer, M.
- Kirkbride, J.
- Kirkland, K. H.
- Kishore, V. V. N.
- Kittler, R.
- Kivikoskia, M.
- Kjellstrom, E.
- Klamer, M.
- Kleiman, J.
- Klein, R.
- Klein, S. A.
- Kleinfeld Technical Services Inc.
- Kleissl, J.
- Klem, E. J. D.
- Klemm, A. J.
- Klemm, P.
- Klems, J. H.
- Klemsb, J. H.
- Klinnert, M. D.
- Klobut, K.
- Kmeid, Z.
- Knaebe, M.
- Knopp, T.
- Knoppel, H.
- Knowles, R. L.
- Knudsen, B.
- Ko, S. J.
- Koch, A.
- Ko?¨ª, J.
- Kofler, B.
- Koh, S. C. L.
- Kohler, C.
- Kohler, N.
- Kohonen, R. O.
- Koistinena, K.
- Koivisto, J.
- Kokkib, M. H.
- Kokko, E.
- Kokotti, H.
- Kolari, S.
- Kolbut, K.
- Koleilat, G. I.
- Kolokotroni, M.
- Kolokotsa, D.
- Komulainen, H.
- Komulainen, J.
- Komulainena, H.
- Koniorczyk, M.
- Konopacki, S. J.
- Konstantatos, G.
- Kontopidis, T.
- Kontopidisa, T.
- Kontoyiannidis, S.
- Koo, B.
- Koo, S. Y.
- Koponen, V.
- Koptyug, I. V.
- Korley, F.
- Koronakib, I.
- Koronthalyova, O.
- Koroth, S.
- Korpi, A. P.
- Can microbial volatile metabolites cause irritation at indoor air concentrations?
- Fungal volatile metabolites and biological responses to fungal exposure
- Sensory irritating potency of some microbial volatile organic compounds (MVOCs) and a mixture of five MVOCs
- Sensory irritation of microbially produced volatile organic compounds in mice during repeated exposures
- Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions
- Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
- Korpi, M.
- Korpia, A.
- Korppi, M.
- Korsgaard, V.
- Kosaka, M.
- Koskela, K.
- Koskenvuo, M.
- Koskinen, O. M.
- Kosma, V.
- Kosmatopoulos, E.
- Kosny, J.
- Effect of framing factor on clear wall r-value for wood and steel framed walls
- Multi-dimensional heat transfer through complex building envelope assemblies in hourly energy simulation programs
- The whole wall thermal performance calculator-on the net
- Theoretical and experimental thermal performance analysis of complex thermal storage membrane containing bio-based phase-change
- Whole wall rating/label for structural insulated panel: steady-state thermal analysis
- Kosorica, V.
- Kosovac, B.
- Kossecka, E.
- Kotey, N. A.
- Kothari, S.
- Kottek, M.
- Koui, M.
- Koukila-Kahkola, P.
- Kousa, A.
- Koutrakis, P.
- Koutrakisa, P.
- Kovacevic, P.
- Kowalski, S. J.
- Kowalski, W. J.
- Kowsary
- Koyunbaba, B. K.
- Kozai, T.
- Kozak, R. A.
- Koziel, J.
- Air sampling with porous solid-phase microextraction fibers
- Design and validation of portable SPME devices for rapid field air sampling and diffusion based calibration
- Fast field sampling/sample preparation and quantification of volatile organic compounds in indoor air by solid-phase microextraction and portable gas chromatography
- Sampling and sample-preparation strategies based on solid-phase microextraction for analysis of indoor air
- Kozinski, J.
- Koziol, L.
- Kozlowski, D.
- Krajicek, Z.
- Kramer, I. J.
- Kr?mer, U.
- Kreiss, K.
- Kreja, L.
- Kreutzer, R. A.
- Kriegler, E.
- Krik?taponis, A.
- Krogstad, N. V.
- Krokida, M. K.
- Kroppenstedt, R. M.
- Krouglicof, N.
- Kr¨¹gerb, U.
- Krupa, S. V.
- Krus, M.
- A new model for mould prediction and its application on a test roof
- A new model for mould prediction and its application on dwellings with mould on the outer facades
- Determination of hygric material properties and calculation of the moisture balance of wooden prisms
- Determination of moisture and salt content distributions by combining NMR and gamma ray measurements
- Information and Technology Transfer from IBP: Mold Growth on ETICS (EIFS) as a Result of "Bad Workmanship"?
- Mold growth prediction by computational simulation
- Simple methods to approximate the liquid transport coefficients describing the absorption and drying
- Kruse, P.
- Krysiska-traczyk, E.
- Ku, P. -.
- Kudder, R. J.
- Kuehn, T. H.
- Kuenzel, H. M.
- An educational hygrothermal model: WUFI-ORNL/IBP
- Position paper on material characterization and HAM model benchmarking
- Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
- The hygrothermal behaviour of rooms: combining thermal building simulation and hygrothermal envelope calculation
- Uncertainty approaches for hygrothermal building simulations - drying of an AAC flat roof in different climates
- Kuenzli, N.
- Kuhn, D. M.
- Kuhn, T. E.
- Kuiper-Goodman, T.
- Kullman, G. J.
- Kullman, L.
- Kulmala, I. A. S.
- Kulmala, M.
- Kulmalaa, M.
- K¨¹lt¨¹r, S.
- Kulve, M.
- Kumada, T.
- Kumar, R.
- Kumar, S.
- Kumaran, H.
- Kumaran, K.
- A comparison of different techniques to quantify moisture content profiles in porous building materials
- Determination of the liquid water diffusivity from transient moisture transfer experiments
- Effect of surface temperature on water absorption coefficient of building materials
- Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
- Final Report from Task 8 of MEWS Project (T8-03) - Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding Clad Wood-Frame Walls
- Influence of air space on multi-layered material water vapor permeability measurement
- Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
- Integrated analysis of whole building heat, air and moisture transfer
- Modeling moisture accumulation in multi-layered building materials, MODELING MOISTURE IN RESIDENTIAL BUILDINGS WITH A MULTIZONE IAQ PROGRAM
- Moisture management of EIFS walls. Part 1.The basis for evaluation
- NIST/NRC-Canada interlaboratory comparison of guarded hot plate measurements: 1993-1997
- Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
- Transient model for coupled heat, air and moisture transfer through multilayered porous media
- Kumaran, M. K.
- A comparison of empirical indoor relative humidity models with measured data
- A logical extension of the ASTM Standard E96 to determine the dependence of water vapor transmission on relative humidity
- A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
- A thermal and moisture transport property data base for common building and insulating materials (final report)
- Application of gamma-ray spectroscopy for determination of moisture distribution in insulating materials
- Benchmarking of the advanced hygrothermal model hygIRC with mid scale experiments
- Building envelope design, Part 2: estimating field performance of thermal insulation
- Criteria for unaccesseptable damage on wood systems
- Determination of equilibrium moisture content of building materials: some practical difficulties
- Durability assessments of wood-frame construction using the concept of damage-functions
- Effect of exfiltration on the hygrothermal behaviour of a residential wall assembly: results from calculations and computer simulations
- Final Report, IEA-Annex 24, Task 3: Material Properties
- Indoor and outdoor weather analysis tool for hygrothermal modelling
- Influence of material properties on the moisture response of an ideal stucco wall: results from hygrothermal simulation
- In-Situ performance evaluation of exterior insulation basement systems (EIBS) - spray polyurethane foam: summary report
- MEWS methodology for developing moisture management strategies: application to stucco-clad wood-frame walls in North America
- Modeling heat, air and moisture transport through building materials and components
- Moisture buffering capacities of five North American building materials
- Moisture diffusivity of building materials from water absorption measurements
- Moisture transport coefficient of pine from gamma ray absorption measurements
- On implementing experimental biological damage-functions models in durability assessment systems
- Prediction of moisture response of wood frame walls using IRC's advanced hygrothermal model (hygIRC)
- Protecting the long-term performance of building envelope components
- Report from Task 4 of MEWS Project - Environmental Conditions, Final Report
- Report from Task 8 of MEWS Project - MEWS Methodology for Developing Moisture Management Strategies - Application to Stucco Clad Wood-Frame Walls in North America
- Taking guess work out of placing air/vapor barriers
- Three-dimensional analysis of thermal resistance of exterior basement insulation systems (EIBS)
- Use of hygrothermal numerical modeling to identify optimal retrofit options for high-rise buildings
- Vapor transport characteristics of mineral fiber insulation from heat flow meter measurements
- Water vapor transmission and moisture accumulation in polyurethane and polyisocyanurate foams
- Kummert, M.
- Kung, H. K.
- Kuntz, M.
- Kunzel, H. M.
- A new model for mould prediction and its application on a test roof
- Ecological insulation materials - does sorption moisture affect their insulation performance?
- Effect of interior and exterior insulation on the hygrothermal behaviour of exposed walls
- Moisture risk assessment of roof constructions by computer simulation in comparison to the standard Glaser-method
- More moisture load tolerance of construction assemblies through the application of a smart vapor retarder
- Smart vapor retarder: an innovation inspired by computer simulations
- The smart vapor retarder: an innovation inspired by computer simulations
- K¨¹nzel, H. M.
- Calculation of heat and moisture transfer in exposed building components
- Combined effect of temperature and humidity of the detoriation process of insulation materials in ETICS
- Flexible vapor control solves moisture problems of building assemblies - smart retarder to replace the conventional PE-film
- Moisture buffering effects of interior linings made from wood or wood based products
- Mold growth prediction by computational simulation
- Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope
- Simultaneous heat and moisture transport in building components. one- and two-dimensional calculation using simple parameters
- Two-dimensional transient heat and moisture simulations of rising damp with WUFI 2D
- Uncertainty of hygrothermal calculations
- WUFI-ORNL/IBP - A North American Hygrothermal Mode
- K¨¹nzlib, N.
- Kuo, Y.
- Kupfer, K.
- Kurata, H.
- Kurkilahti, M.
- Kurkinen, K.
- Kurnitski, J.
- Crawl space air change, heat and moisture behaviour
- Crawl space types and building physics
- Facade design principles for nearly zero energy buildings in a cold climate
- Fungal spore transport through a building structure
- Humidity control in outdoor-air-ventilated crawl spaces in cold climate by means of ventilation, ground covers and dehumidification
- Indoor humidity loads and moisture production in lightweight timber-frame detached houses
- Microbial contamination of indoor air due to leakages from crawl space- a field study
- Moisture conditions of outdoor air ventilated crawl spaces in apartment buildings in a cold climate
- The effects of ventilation systems and building fabric on the stability of indoor temperature and humidity in Finnish detached houses
- Kursar, T. A.
- Kus, H.
- Kusuda, T.
- Kutny, L.
- Kuyatt, C. E.
- Kuznik, F.
- A review on phase change materials integrated in building walls
- Experimental assessment of a phase change material for wall building use
- Interpretation of calorimetry experiments to characterise phase change materials
- Modeling phase change materials behavior in building applications: Comments on material characterization and model validation
- One dimensional benchmark based on PCM
- Optimization of a phase change material wallboard for building use
- Kvande, T.
- Kwiatkowski, J.
- Kyle, B. R.
- Kyle, D. M.
- Laboratory measurements of the drying rates of low-slope roofing systems
- Moisture: its effects on the thermal performance of a low-slope roof system
- L, C.
- L, W.
- La, D.
- Laatikainen, R.
- Laatsch, H.
- Labbena, H. H.
- Labor, U. S. D.
- Laboratory, F.P.
- Lacasse, M. A.
- A discrete stochastic model for performance prediction of roofing systems
- A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
- An approach to validating computational models for hygrothermal analysis - full scale experiments
- Benchmarking of the advanced hygrothermal model hygIRC with mid scale experiments
- Defining climate regions as a basis for specifying requirements for precipitation protection for walls
- Durability of Building Materials and Components 8
- Executive Summary of Research Contributions Related to Moisture Management of Exterior Wall Systems (MEWS) - Modeling, Experiments, and Benchmarking
- Final Report from Task 8 of MEWS Project (T8-03) - Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding Clad Wood-Frame Walls
- MEWS methodology for developing moisture management strategies: application to stucco-clad wood-frame walls in North America
- Proposed method for calculating water penetration test parameters of wall assemblies as applied to Istanbul, Turkey
- Report from Task 2 of MEWS Project - Description of 17 Large Sale Wall Specimens Built for Water Entry Investigation in IRC Dynamic Wall Testing Facility
- Report from task 6 of MEWS project -- experimental assessment of water penetration and entry into wood-frame wall specimens, - final report
- Report from Task 8 of MEWS Project - MEWS Methodology for Developing Moisture Management Strategies - Application to Stucco Clad Wood-Frame Walls in North America
- Lacaze, I.
- Lacey, J.
- Lackey, J. C.
- A logical extension of the ASTM Standard E96 to determine the dependence of water vapor transmission on relative humidity
- Final Report from Task 8 of MEWS Project (T8-03) - Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding Clad Wood-Frame Walls
- Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
- Lafave, J. M.
- Laflamme, A.
- Lafontaine, P.
- Lagergren, E. S.
- Lagus, P. L.
- L?hdesm?ki
- Lahme, J. R. a.
- Lahoucine, C. O.
- Lahtinen, M.
- Lai, A. C. K.
- Laina, M.
- Lakhmetkin, I. V.
- Laks, P. E.
- Lalas, D. P.
- Lam, J.
- Lam, K. P.
- Lamar, R. T.
- Lamberts, R.
- A view of energy and building performance simulation at the start of the third millennium
- Development of a calorimeter for determination of the solar factor of architectural glass and fenestrations
- Improvement of a measurement system for solar heat gain through fenestrations
- Moisture migration through exterior envelopes in brazil
- UMIDUS: a pc program for the prediction of heat and moisture transfer in porous building elements
- Lampert, C. M.
- Land, C. J.
- Landf, D.
- Landry, J.
- Landsbergis, P.
- Lang, R. W.
- Langenhove, v.
- Langle, I.
- Langmans, J.
- Lansley, P.
- Laouadi, A.
- Lapka, P.
- Lappalainen, S.
- Lapusan, C.
- Larkin, G. M.
- Larsen, A.
- Larsen, K.
- MVOC analysis for detection of microbial growth in buildings I. Variation of MVOC and mycotoxin patterns in aspergillus versicolor
- Variation of volatile organic compound patterns of mold species from damp buildings
- Volatile metabolites from indoor molds grown on media containing wood constituents
- Volatile metabolites from mold growth on building materials and synthetic media
- Larsen, L.
- Larsen, T. O.
- Larsenb, T. O.
- Larsson, L.
- Airborne environmental endotoxin: a cross-validation of sampling and analysis techniques
- Determination of ergosterol in organic dust by gas chromatography-mass spectrometry
- Determination of microbial chemical markers by gas chromatography-mass spectrometry - potential for diagnosis and studies on metabolism in situ
- Determination of microbial colonisation in water-damaged buildings using chemical marker analysis by gas chromatography-mass spectrometry
- Quantification of ergosterol and 3-hydroxy fatty acids in settled house dust by gas chromatography-mass spectrometry: Comparison with fungal culture and determination of endotoxin by a Limulus amebocyte lysate assay
- Use of gas chromatography-mass spectrometry/solid phase microextraction for the identification of MVOCs from moldy building materials
- Larsson, N.
- Lart, S.
- l'Association provinciale des constructeurs d'habitations du Qu¨¦bec (APCHQ)
- Lassue, S.
- A review on phase-change materials: Mathematical modeling and simulations
- Experimental and numerical characterization of thermal bridges in prefabricated building walls
- Interpretation of calorimetry experiments to characterise phase change materials
- Modeling phase change materials behavior in building applications: Comments on material characterization and model validation
- Lates, R.
- Lauberb, A.
- Launder, B. E.
- Lau?mann, D.
- Law, K. M.
- Lawless, P. A.
- Lawrence, K.
- Lawrie, L. K.
- Lawryk, N.
- Lawton, M. D.
- A comparison of airborne ergosterol, glucan and Air-O-Cell data in relation to physical assessments of mold damage and some other parameters
- An evaluation guide for performance assessment of air barrier
- Convective processes in loose-fill attic insulation--metering equipment
- EASE demonstration project: APCHQ's advanced house
- Moldy houses - building science lessons from the Wallaceburg project
- Rain penetration control - applying current knowledge (rpc-00)
- Reacting to durability problems with Vancouver buildings
- Rotting wood framed apartments -- not just a Vancouver problem
- Stucco-clad wall drying experiment
- Testing of air barrier construction details
- The influence of house characteristics in a Canadian community on microbiological contamination
- Laycock, P.
- Laytonb, D. W.
- Layzell, J.
- Lazaro, A.
- Le, M.
- Leaderer, B. P.
- Comparisons of seasonal fungal prevalence in indoor and outdoor air and in house dusts of dwellings in one Northeast American county
- Dustborne Alternaria alternata antigens in US homes: results from the National Survey of Lead and Allergens in Housing
- The relation between fungal propagules in indoor air and home characteristics
- Leblanc, R.
- Lebow, P. K.
- Lebret, E.
- Ledbetter, S.
- Ledger, B.
- Lee, C.
- Lee, E. S.
- Lee, H. S.
- Lee, J. H.
- Lee, K. S.
- Lee, S.
- Bioaerosol collection by a new electrostatic precipitator
- Collection of airborne microorganisms by a new electrostatic precipitator
- Power output analysis of transparent thin-film module in building integrated photovoltaic system (BIPV)
- Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module
- The Indoor Thermal Research of the HCRI-BIPV Smart Window
- The use of the green fluorescent protein as a biomarker for sapstain fungi
- Leftheriotis, G.
- Lehmann, I.
- Lehtinen, T.
- Lehtonen, M.
- Lehtovaara, J.
- Leinonen, J.
- Leiserson, K.
- Lemaire, J.
- Leming, M.
- Lemonick, M. D.
- Lenardo, B.
- Lengsfeld, K.
- Lenssen, N.
- Lenton, T. M.
- Lenzen, M.
- Leon, M. A.
- Leonard, C. A.
- Leonardi, E.
- Leong, A.
- Leow, S. W.
- Lepper, M.
- Lerer, M. M.
- Lerma, J. L.
- Leung, B.
- Leung, D. Y. M.
- Leung, W. Y.
- Leusden, G. v.
- LeVan, S. L.
- Levermore, G.
- Levetin, C. R.
- Levetin, E.
- Levin, H.
- Levin, J.
- Levin, P.
- Levina, L.
- Levineb, S. B.
- Levis, J. O.
- Levy, J. I.
- Levy, S.
- Lewandowska-iwaniak, W.
- Lewandowski, W. M.
- Lewicki, P.
- Lewis, C. W.
- Lewis, J. O.
- Lewis, R.
- Leynaert, B.
- Li, B.
- Li, C. S. G.
- Li, H.
- Development of a conceptual model for the selection of intelligent building systems
- Study on dynamic characteristics of natural and mechanical wind in built environment using spectral analysis
- Supporting the decision-making process for sustainable housing
- Wavelet analysis on fluctuating characteristics of airflow in building environments
- Li, J.
- Effects of damp and mould in the home on respiratory health: a review of the literature
- Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures
- The influence of space discretization on the accuracy of numerical simulation of heat and moisture transport in porous building materials
- Web-based integrated project control system
- Li, P. C.
- Li, Q.
- Li, S.
- Li, X.
- Li, Y. M.
- Improved uncertainty for a modified commercial emissometer
- Mathematical solutions and numerical models employed for the investigations of PCMs' phase transformations
- Numerical investigation of the influence of room factors on HAM transport in a full-scale experimental room
- Simple correction methods of infrared thermography for building exterior surfaces
- Technical development of rotary desiccant dehumidification and air conditioning: A review
- Li, Z.
- Lian, Z.
- Liao, T.
- Liaw, J.
- Liebhaber, F.
- Liebreich, M.
- Liesen, R. J.
- Light, E. N.
- Ligman, B.
- Ligman, D. B. K.
- Lignell, U.
- Lim, B. B. P.
- Limam, K.
- Limited, P.P.A.
- Lin, G.
- Lin, R. a.
- Lin, T.
- Lin, W.
- Lin, X.
- Lin, Y.
- Lin, Z.
- Linda, B
- Linda, M. P. H.
- Lindberg, R.
- An approach to management of critical indoor air problems in school buildings
- Moisture behavior of timber-framed external wall structures in Nordic climate
- Moisture transport in timber-framed external wall structures in Nordic climate - laboratory tests
- The effect of air leakage through the moisture damaged structures in a school building having mechanical exhaust ventilation
- Lindenb, K. V. D.
- Lindgren, O.
- Lindley, D. V.
- Lindroos, O.
- Lindsey, G.
- Ling, F.
- Lintula, K.
- Lio, M.
- Lippiatt, B.C.
- Liso, K. R.
- Lis?, K. R.
- Liss¨¦n, J. M. S.
- Litovsky, E.
- Littler, J.
- Liu, A. H.
- Liu, B. Y. H.
- Liu, C.
- Liu, D.
- Liu, H.
- Liu, J.
- A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof
- A theoretical adaptive model of thermal comfort - Adaptive Predicted Mean Vote (aPMV)
- An optimization technique to determine red oak surface and internal moisture transfer coefficients during drying
- CFD prediction of surface condensation on walls and its experimental validation
- Experimental and numerical study on indoor temperature and humidity with free water surface
- Liu, K.
- Liu, P. Y.
- Liu, S.
- Liu, X.
- Liub, B.
- Liukkonen, S.
- Livet, J.
- Ljalg, U.
- Lloyd, J. D.
- Loenen, E. v.
- Loftness, V.
- Loikkanen, P.
- Lollini, R.
- Lombardi, S. C. C.
- Londra, P. A.
- Long, C. M.
- Long, D.
- Long, N.
- Loo, V.
- Loomans, M.
- Lopes, V.
- Lopez, R.
- Lord, H.
- Lorentea, S.
- Lorenz, L. F.
- Lorenz, W.
- Lougheed, G. D.
- Lounis, Z.
- Loutzenhiser, P. G.
- Love, P. E. D.
- A framework for implementing ISO 14000 in construction
- Building America Best Practices Series: Volume 3 ¨C Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Cold and Very Cold Climates
- Building materials selection: greenhouse strategies for built facilities
- Reviewing the past to learn in the future: making sense of design errors and failures in construction
- Using national input-output data for embodied energy analysis of individual residential buildings
- Lovins, A.
- Lovins, H. L.
- Low, G. A.
- Development of model systems for investigations of the dry rot fungus Serpula lacrymans (Schumach. ex Fr.) Gray: Use for analysis of the environmental sensitivity of the organism
- The use of representative modelling to test the efficacy of environmental control treatments for the dry rot fungus Serpula lacrymans: simulating the infection and the treatment of flooring timber
- Lowe, R.
- Lozano, G. D. A.
- Lstiburek, J. W.
- Air pressure and building envelopes
- Blame It on Star Trek: Solving IAQ Problems
- Builder's guide: cold climates
- Moisture Control Handbook: new low-rise, residential construction
- Moisture control handbook: principles and practices for residential and small commercial buildings
- Performance evaluation of exterior insulation and finish systems (EIFS)
- Pressure response of buildings
- The fundamental flaw of EIFS
- Understanding vapor barriers
- Unventing attics in cold climates
- Lu, J.
- Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard,
- Effect of fluid flow and packing factor on energy performance of a wall-mounted hybrid photovoltaic/water-heating collector system
- Efficiency of a portable indoor air cleaner in removing pollens and fungal spores
- Lu, L.
- Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer fa?ade,
- Overall energy performance of semi-transparent single-glazed photovoltaic (PV) window for a typical office in Hong Kong
- Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems, 2013
- Thermal behavior of a novel type see-through glazing system with integrated PV cells
- Lu, S.
- Lu, T. J.
- Lu, X.
- L¨¹, X.
- Lua, T.
- Lucas, F.
- Lucht, W.
- Lucuik, M.
- Luczynska, C.
- Ludwig, N.
- Lugauskas, A.
- Luikov, A. V.
- Luizi-ponzo, A. P.
- Lun, H.
- Lund, M.
- Lunden, M. M.
- Lundgren, N. L. C.
- Lundin, A.
- Luoma, M.
- Luterbacher, U.
- Lutke, A. E.
- Luukkanen, J.
- Luvall, J. C.
- Lux, M. E.
- Luyben, W. L.
- Luyendijk, R.
- Lyberg, M. D.
- Lykoudis, S.
- Lynch, R.
- Ma, Z. W.
- Maalouf, C.
- Macdonald, I.
- Macgill, I.
- Macher, J.
- Bioaerosols: assessment and contro
- Biodiversity and concentrations of airborne fungi in large US office buildings from the BASE study
- Prevalence of culturable airborne fungi in 100 U.S. office buildings in the building assessment survey and evaluation (BASE) study
- Review of methods to collect settled dust and isolate culturable microorganisms
- Macias, A.
- Mackay, D.
- Mackley, C. J.
- Macphaul, D.
- Madala, S.
- Madelin, T. M.
- Mad¨§ra, J.
- Madhuri, I.
- Madsen, H. W.
- Madsena, J. ?.
- Madsenc, J. ?.
- Madsenc, T. L.
- Magee, R. J.
- Mahdavi, A.
- Mahendran, M.
- Maher, C.
- Mahooti-brooks, N.
- Maina, C. E.
- Mainelis, G.
- Mainka, G. W.
- Maio, R.
- Maiya, M. P.
- Majumdar, M. R.
- Makaremi, N.
- Makatayama, M.
- M?kel?inen, P.
- Makepeace, C. B.
- Maki, A.
- M?kip??, V.
- Makkonen, L.
- Makower, J., Pernick, R. and Wilder, C.
- Malcot, W. V.
- Malinauskas, V.
- Malkawi, A. M.
- Malkin, R.
- Mallick, T. K.
- Mallidi, S. R.
- Malloch, D.
- Malmberg, P.
- Malmqvist, T.
- Maltby, L.
- Manca, M.
- Mancini, S.
- Manfreda, J.
- Manfredini, A.
- Mangler, M.
- Manjarrez, M.
- Mann, S.
- Manna, D.
- Manufactured Housing Research Alliance
- Manz, H.
- Available remodeling simulation for a BIPV as a shading device
- Empirical validations of solar gain models for a glazing unit with exterior and interior blind assemblies
- Finite element analysis of temperature-induced deflection of vacuum glazing
- On minimizing heat transport in architectural glazing
- Temperature-driven single-sided ventilation through a large rectangular opening, review on wind driven ventilation techniques
- Mao, Q.
- A limit state design (LSD) approach for comparing relative drying performance of wood-frame envelope systems with full-scale lab, A roadmap towards intelligent net zero- and positive-energy buildings,
- A new test method to determine the relative drying capacity of building envelope panels of various configurations
- A new testing method to evaluate the relative drying performance of different building envelope systems using water trays
- Effect of capillarity on rainwater penetration in the building envelope
- Experimental Determination of Drying Capacity of Wood-Frame Envelope Systems for Comparative Studies and Limit State Design
- In-cavity evaporation allowance--A drying capacity indicator for wood-frame wall system
- Test method to measure the relative capacity of wall panels to evacuate moisture from their stud cavity
- Mapel, J. K.
- Mar, J. D.
- March, E.
- Marcham, C.
- Marchand, R. G.
- Marchetti, M.
- Marco, R.
- Mardiana-idayu, A.
- Marechal, W.
- Maref, W. M. L.
- A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
- A precision weighing system for helping assess the hygrotherma response of full-scale wall assemblies
- An approach to validating computational models for hygrothermal analysis - full scale experiments
- Assembly and Calibration of a Compact Temperature and Relative Humidity Sensor
- Benchmarking of the advanced hygrothermal model hygIRC with mid scale experiments
- Executive Summary of Research Contributions Related to Moisture Management of Exterior Wall Systems (MEWS) - Modeling, Experiments, and Benchmarking
- In-Situ performance evaluation of exterior insulation basement systems (EIBS) - spray polyurethane foam: summary report
- Summary of Research Contributions Related to Moisture Management of Exterior Wall System (MEWS)-- Modeling, Experiments and Benchmarking
- Three-dimensional analysis of thermal resistance of exterior basement insulation systems (EIBS)
- Marek, R.
- Marin, J.
- Marinetti, S.
- Marinkovich, V.
- Marinoski, D. L.
- Marion, B.
- Marju, R.
- Mark, D.
- Markglencross, P.
- Markova, N.
- Marmion, P.
- Maroni, M.
- Maroulis, Z. B.
- Marquardt, H.
- Marr, N. J.
- Marsh, C.
- Marsh, G.
- Marshall, H. E.
- Marshall, J. E. A.
- Marshall, R. R.
- Marshall, S.
- Marszal, A. J.
- Martel, S.
- Martens, W.
- Martin, C.
- Martin, J. M.
- Martin, V.
- Mart¨ªnez, G.
- Martinez, K.
- Martins, C. R.
- Martorell, I.
- Martys, N. S.
- Marynowicz, A.
- Marzouk, M.
- Masini, N.
- Mason, M. A.
- Assessing the performance of full-scale environmental chambers using an independently measured emissions source
- Design and characterization of a small chamber for chemical and biological evaluation of sources of indoor air contamination
- The distribution of Chlorpyrifos following a crack and crevice type application in the U.S. EPA indoor air quality research house
- Mason, S. J.
- Masoso, O. T.
- Master, Z. F.
- Mat, S.
- Matheson, M. C.
- Mathews, E. H.
- Matiasovsky, P.
- Matilainen, M.
- Matos, J. A. C.
- Matovi, M. D.
- Matson, M. S.
- Matson, N. E.
- Matson, R. J.
- Matson, U.
- Matsumoto, M.
- Matsuoka, H.
- Matsuokac, S.
- Matsushita, T.
- Mattei, S.
- Mattock, C.
- Mattsson, B.
- Mattsson, M. S.
- Maturi, L.
- Maurenbrecher, A. H. P.
- Mauthner, F.
- Maxwell, G. M.
- May, J. C.
- Mayer, B.
- Maynard, A. D.
- Mbachu, J.
- Mbakogu, F. C.
- Mbise, D. L. B.
- Mcbaina, G. D.
- McCaa, D. J.
- McCartney, C.
- Mccormack, A.
- Mccormack, S. J.
- Mccrady, E.
- Mcdonald, N. C.
- Mcdonald, S. A.
- Mcgee, P. A.
- Mcghee, C.
- McGillis, J. A.
- McGowan, A. G.
- Mcguigan, F.
- McIlvaine, J.
- McKeever, D. B.
- Mckendry, B. B.
- Mckenney, D. W.
- Mckinsey
- Mckone, T. E.
- Mclean, C.
- McLean, R. C.
- A technique for the prediction of the conditions leading to mould growth in buildings
- Development of a simulation tool for mould growth prediction in buildings
- Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures
- Moisture permeability data presented as a mathematical relationship
- Nonisothermal moisture diffusion in porous building materials
- Prediction of toxigenic fungal growth in buildings by using a novel modelling system
- The application of X-ray absorption to building moisture transport studies
- The determination of vapour and liquid transport coefficients as input to combined heat mass transfer models
- The effect of temperature on the moisture permeability of building materials
- The selection of appropriate flow potentials for moisture transport models
- The use of differential permeabilty in moisture transport modelling
- McNeel, S. V.
- Mcneil, S.
- McQuade, D.
- Mcqueen, A. E.
- Mcwilliams, J.
- Meacham, B.
- Meadows, D. L.
- Medina, M. A.
- Meentemeyer, V.
- Meerbeek, B.
- Mehling, H.
- Mei, D. I.
- Meier, A.
- Meier, R. M.
- Meil, J. K.
- Meininghaus, R.
- Mekid, S.
- Mekis, E.
- Meklin, T.
- An approach to management of critical indoor air problems in school buildings
- Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
- Fungi and actinobacteria in moisture-damaged building materials - concentrations and diversity
- Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
- Microbial exposure and health in schools - effects of moisture damage and renovation
- Moisture damage in schools - symptoms and indoor air microbes
- Moisture, mold and health in apartment homes
- Rain penetration control - applying current knowledge (rpc-00)
- Size distributions of airborne microbes in moisture-damaged and reference school buildings of two construction types
- Skin-prick test findings in students from moisture- and mould-damaged schools: A 3-year follow-up study
- Temporal and spatial variation of fungal concentrations in indoor air
- The relationship between moisture or mould observations in houses and the state of health of their occupants
- Meklina, T.
- Meldrum, J. R.
- Melencion, N.
- Melikov, A. K. . P.
- Accuracy Limitations for Low-Velocity Measurements and Draft Assessment in Room
- Air turbulence and sensation of draught
- Comparison of different methods for the determination of dynamic characteristics of low velocity thermal anemometers
- Methods for air cleaning and protection of building occupants from airborne pathogens
- Requirements and guidelines for low velocity measurements
- Total uncertainty of low velocity thermal anemometers for measurement of indoor air movements
- Melikov, I. A.
- Melikov, R. K.
- Melikova, A. K.
- Melikow, A. K.
- Memon, S. A.
- Mendell, M. J.
- Mendes, J. F.
- Mendes, N.
- Combined Heat, Air and Moisture (HAM) Transfer Model for Porous Building Materials
- Comparative analysis of response-factor and finite-volume based methods for predicting heat and moisture transfer through porous building materials
- DOMUS 2.0: a whole-building hygrothermal simulation program
- Heat, air and moisture transfer through hollow porous blocks
- Microbial contamination of indoor air
- Moisture migration through exterior envelopes in brazil
- UMIDUS: a pc program for the prediction of heat and moisture transfer in porous building elements
- Mendesa, N.
- Mendonca, K. C.
- Mendon?a, K. C.
- Mendon?a, P.
- Menendez, V.
- Menetrez, D. W.
- Menetrez, M.
- Menezo, C.
- Meng, B.
- Mensink, I.
- Meola, C.
- Mercaldo, L. V.
- M¨¦riaux, A.
- Meroni, I.
- Messadi, T.
- Meunier, F.
- Meyer, A.
- Meyer, H. W.
- Miao, G.
- Michel, F. C.
- Midtg?rd, O. M.
- Miettinen, H. P.
- Miguel, A. F.
- Miguela, A. F.
- Mihalka, P.
- Mika, T.
- Mikitiuk, M. J.
- Mikko, V.
- Miletic, I.
- Militzer, J.
- Miller, D.
- Miller, J. D.
- A comparison of airborne ergosterol, glucan and Air-O-Cell data in relation to physical assessments of mold damage and some other parameters
- Acute pulmonary hemorrhage in infants associated with exposure to Stachybotrys atra and other fungi
- Air sampling results in relation to extent of fungal colonization of building materials in some water-damaged buildings
- Collection of spores of various fungi by a Reuter centrifugal sampler
- Exposure measures for studies of mold and dampness and respiratory health
- Field guide for the determination of biological contaminants in environmental samples
- Fungi and fungal products in some Canadian houses
- Fungi as contaminants in indoor air
- Microbial contamination of indoor air
- Microbial volatile organic compounds with emphasis on those arising from filamentous fungal contaminants of buildings
- Microorganisms in home and indoor work environments
- Quantification of health effects of combined exposures: a new beginning
- Review of methods applicable to the assessment of mold exposure to children
- Significance of fungi in indoor air: report from a working group
- The use of ergosterol to measure exposure to fungal propagules in indoor air
- Transportation energy embodied in construction materials
- Miller, S. L.
- Nonlinear least-squares minimization applied to tracer gas decay for determining airflow rates in a two-zone building
- Study of penetration of outdoor fine particles into nonresidential building with multizone simulation.
- Total and culturable airborne bacteria and fungi in arid region flood-damaged residences
- Millington, W. M.
- Mills, E.
- Milne, A.
- Milonas, S.
- Milos, I.
- Milton, D.
- Airborne environmental endotoxin: a cross-validation of sampling and analysis techniques
- Populations and determinants of airborne fungi in large office buildings
- Quantification of ergosterol and 3-hydroxy fatty acids in settled house dust by gas chromatography-mass spectrometry: Comparison with fungal culture and determination of endotoxin by a Limulus amebocyte lysate assay
- Risk of sick leave associated with outdoor air supply rate, humidification, and occupant complaints
- Milton, J. A.
- Mims, C.
- Minichiello, F.
- Minister of Public Works and Government Services Canada
- Minkina, W.
- Minor, J. E.
- Miozzo, M.
- Mir, S.
- Miraglia, M.
- Mirasgedis, S.
- Mir¨®, L.
- Mirsadeghi, M.
- Mirzaei, P. A.
- Mishra, B.
- Mitakakis, T.
- Current indoor allergen levels of fungi and cats, but not house dust mites, influence allergy and asthma in adults with high dust mite exposure
- Prevalence and residential determinants of fungi within homes in Melbourne, Australia
- Reliability of measures of spores of Alternaria and pollen concentrations in air over two towns in rural Australia
- Mitalas, G. P.
- Mitamura, T.
- Mitchell, P.
- Mitchell, R.
- Mitchell, S. L.
- Mitra?inovi?, A.
- Mitsutake, Y.
- Miura, T.
- Miyazaki, T.
- Mizuno, M.
- Mj?rnell, K.
- Mochida, T.
- Modeling
- Moffett, P.
- Mohraz, B.
- Mokhtar, A.
- Mokhtarzadeh-dehghana, R.
- Molhave, L.
- Molina, .
- Moller, M.
- Monavari, H. R.
- M?nch, L.
- Monde, M.
- Mondol, J. D.
- Monforti-ferrario, F.
- Monitor
- Monta?a, E.
- Montanarellac, L.
- Monte, M. D.
- Moody, R. C.
- Mook, v.
- Moon, H. J.
- Moon, R. J.
- Moore, A.
- Moore, D.
- Mora, E. P.
- Mora, L.
- Mora, M.
- Mora, Y.
- Morabito, G.
- Moraes, O. L. L.
- Moran, M. S.
- Morari, M.
- Morawska, L.
- Morbitzer, C. A.
- Moreau, J. A.
- Moreira, D. M.
- Morel, D.
- Morello, E.
- Morey, P. R.
- Air- and dustborne mycoflora in houses free of water damage and fungal growth
- Building-associated pulmonary disease from exposure to Stachybotrys chartarum and Aspergillus versicolor
- Construction defects and microbial growth
- El Ni?o water leaks identify rooms with concealed mould growth and degraded indoor air quality
- Hidden mold sometimes enters the indoor air
- Microbial VOCs as indicators for mold growth in buildings
- Mitigation of visible fungal contamination in buildings: experience from 1993 - 1998
- Practical aspects of sampling for organic dusts and microorganisms
- Use of fungal detectors to monitor drying of water damaged buildings
- Water leakage from exterior walls as an indicator of degraded air quality
- Morey, R.
- Mori, M.
- Mori, T.
- Morley, M.
- Morli¨¨rea, N.
- Moropoulou, A.
- Morrell, J. J.
- Morris, A. S.
- Morris, G. K.
- Morris, P. I.
- Criteria for unacceptable damage on wood systems
- Designing for durable wood construction: the 4 Ds
- Evaluation of vapour diffusion ports on drying of wood-frame walls under controlled conditions
- Limiting conditions for decay in wood systems
- The influence of design on drying rates in wood-frame walls under controlled conditions
- Understanding biodeterioration of wood in structures
- Morris, R.
- Morrisa, G.
- Morrison Hershfield Limited
- A commissionable air barrier system for the building envelope
- A study of the rainscreen concept applied to cladding systems on wood frame walls
- Air Barrier Details - I & II
- CMHC research project: testing of air barriers: construction details
- Commissioning and Monitoring the Building Envelope for Air Leakage
- Moisture content in Canadian wood-frame house construction problems, research and practise from 1975-1991
- Survey of building envelope failures in the coastal climate of British Columbia
- Testing of Air Barriers Construction Details - I & II
- Morrison Hershfield Ltd.
- Morrison, G. L.
- Morrow, L.
- Morse, R.
- Morse-Fortier, L. J.
- Morsing, E.
- Mortensen, L. H.
- Morton, I.
- Moschandreas, D.
- Characteristics of moisture damage in houses and their association with self-reported symptoms of the occupants
- Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
- Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
- Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
- Temporal and spatial variation of fungal concentrations in indoor air
- Moselhi, O.
- An object-oriented model for planning and control of housing construction
- Analysis of perforated walls and tube-type tall building structures
- Data acquisition and analysis for highway construction using geographic information systems
- Estimating weather impact on the duration of construction activities
- Resource-driven scheduling of repetitive activities
- Simulation optimization for earthmoving operations using genetic algorithms
- Web-based integrated project control system
- Moses, C. S.
- Mosley, R. B.
- Motakef, S.
- Motte, F.
- Moularat, S.
- Moura-costa, P.
- Mouriki, E.
- Mousa, M. A.
- Moyer, N. A.
- Mucalov abstract:, G.
- Mucalov, G.
- Mucalov, J.
- Lawsuits grow as moulds multiply: Homeowners are seeking damages in Canada and the U.S. as moulds bring host of health problems
- Lawsuits grow as moulds multiply: Homeowners are seeking damages in Canada and the U.S. as moulds bring host of health problems
- Lawsuits grow as moulds multiply: Homeowners are seeking damages in Canada and the U.S. as moulds bring host of health problems
- Muhieddine, M.
- Muilenberg, M. L.
- Mukherjee, B.
- Mukhopadhyaya, P.
- A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
- Determination of equilibrium moisture content of building materials: some practical difficulties
- Effect of surface temperature on water absorption coefficient of building materials
- Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
- Influence of material properties on the moisture response of an ideal stucco wall: results from hygrothermal simulation
- Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
- Prediction of moisture response of wood frame walls using IRC's advanced hygrothermal model (hygIRC)
- Mullens, M.
- Muller, A.
- Muller, M.
- M¨¹ller, M.
- Muller, T.
- M¨¹ller, T.
- M¨¹ller-sch?ll, C.
- Mullock, J.
- Mulvin, L.
- Munimbazi, C.
- Murad, Y. M.
- Murakami, S.
- Murashita, K.
- Murphy, J. F.
- Murphy, R. J.
- Murray, W. P.
- Murthy, A. V.
- Murtoniemi, T.
- Musabasic, V.
- Musall, E.
- Mussalo-Rauhamaa, H.
- Musser, A.
- Mustelier, N. L.
- Musy, M.
- Mwasha, A.
- Myers, J. H.
- Myhr, U.
- H, D. D.
|| A-F || G | H | I | J | K | L | M || N-S || T-Z ||
CRDBER, at CBS, BCEE, ENCS, Concordia,