Samuelson, I., (1998), Hygrothermal performance of attics
Kurnitski, J. and Matilainen, M., (2000), Moisture conditions of outdoor air ventilated crawl spaces in apartment buildings in a cold climate
Kurnitski, J., (2000), Humidity control in outdoor-air-ventilated crawl spaces in cold climate by means of ventilation, ground covers and dehumidification
ASHRAE , (2000), Recommended practices for controlling moisture in crawl spaces
Pasanen, P.O. et al, (2001), Fungal growth on wood surfaces at different moisture conditions in crawl spaces
Wahlgren, P., (2002), Measurements and simulations of natural and forced convection in loose-fill attic insulation
UDI, (2000), Submission to the Second Commission of Inquiry into the Quality of Condominium Construction
Barrett, D., (2000), The renewal of trust in residential construction part II: commission of inquiry into the quality of condominium construction in British Columbia
Boei, W., (2002), Thousands more leaky condos as crisis spreads to highrises: Problems are surfacing with mould, exterior panels
Karagiozis, A. N., (2003), Importance of moisture control in building performance
Peer, L. B., (2005), Field performance of rainscreeen wall assemblies in coastal BC
Finch, G., (2007), The performance of rainscreen walls in coastal British Columbia
Chen, Y., Athienitis, A. K. and Galal, K., (2010), Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept
Chen, Y., Galal, K., Athienitis, A. K. and Modeling,, (2010), design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 2, ventilated concrete slab
Corbin, C. D. and Zhai, Z. J., (2010), Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic¨Cthermal col
Eiffert, P., (2003), Guidelines for the Economic Evaluation of Building-Integrated Photovoltaic Power Systems
Eiffert, P. and Kiss D. J., (2000), Building-Integrated Photovoltaic Designs for Commercial and Institutional Structures - A Sourcebook for Architects
Fossa, M., Menezo, C. and Leonardi, E., (2008), Experimental natural convection on vertical surfaces for building integrated photovoltaic (BIPV) applications
Helmke, C., (0), Third generation BIPV standard building element with integrated photovoltaic
Jo, J. H. and Otanicar, T. P., (2011), A hierarchical methodology for the mesoscale assessment of building integrated roof solar energy systems
Karava, P., Jubayer, C. M. and Savory, E., (2011), Numerical modelling of forced convective heat transfer from the inclined windward roof of an isolated low-rise building with application to photovoltaic/thermal systems
Kelly, N.J., (1998), Towards a design environment for buildingintegrated energy systems: the integration of electrical power flow modelling with building simulation
Mann, S., Harris, I. and Harris, J., (2006), The development of urban renewable energy at the existential technology research center (ETRC) in Toronto, Canada
Sozer, H., (2002), Identification of barriers to the building integrated photovoltaic design process as applied to curtain-wall
Sozer, H. and Elnimeiri, M., (2007), Critical Factors in Reducing the Cost of Building Integrated Photovoltaic (BIPV) Systems
Sun, L. L. and Yang, H. X., (2010), Impacts of the shading-type building-integrated photovoltaic claddings on electricity generation and cooling load component through shaded windows
Taleb, H. M. and Pitts, A. C., (2009), The potential to exploit use of building-integrated photovoltaics in countries of the Gulf Cooperation Council
Urbanetz, J., Zomer, C. D. and R¨¹ther, R., (2011), Compromises between form and function in grid-connected, building-integrated photovoltaics (BIPV) at low-latitude sites,
Yoo, S. and Manz, H., (2011), Available remodeling simulation for a BIPV as a shading device
Yoon, J., Song, J. and Lee, S., (2011), Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module
BIA , (2002), Overview of building code requirements for masonry structures (ACI 530-02/ASCE 5-02/TMS 402-02) and Specification for Masonry Structures (ACI 530.1-02/ASCE 6-02/TMS 602-02)
BIA , (1989), Manufacturing, classification, and selection of brick - classification, part 2
Reneckis, D., Lafave, J. M., (2005), Analysis of brick veneer walls on wood frame construction subjected to out-of-plane loads
APCHQ , (0), l'Association provinciale des constructeurs d'habitations du Qu¨¦bec (APCHQ)
Consortium , (2003), Introduction to Building Systems Performance: Houses That Work II
LLC , (2006), Moisture-Resistant Homes - A Best Practice Guide and Plan Review Tool for Builders and Designers With a Supplemental Guide for Homeowners
Sumathipala, K., (2006), Flammability tests for regulation of building and construction materials
Sheltersource , (2002), Evaluating Minnesota homes final report
Richardson, J.K, (1987), Fire loss statistics and regulatory framework
Bowman, D.A. and Thorsell, S.R, (2001), Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
CCE , (2001), Relation between objective and sub-objectives, division A
DoD , (2002), Unified facilities criteria (UFC), design: general building
Hui, S. C. M., (2002), Using performance-based approach in building energy standards and codes
Research and Technology , (2002), Research and Development Needs for Structural Performance of Light-frame Residential Construction - Workshop Report
BIA , (2002), Overview of building code requirements for masonry structures (ACI 530-02/ASCE 5-02/TMS 402-02) and Specification for Masonry Structures (ACI 530.1-02/ASCE 6-02/TMS 602-02)
Heffernan, V., (2001), Buildings: one wall centre mechanical and electrical systems
Kelly, N.J., (1998), Towards a design environment for buildingintegrated energy systems: the integration of electrical power flow modelling with building simulation
Yacher, J. M. and Burroughs, W., (1997), In-depth survey report concentration of metalworking mists before and after installation of a commercial air cleaner at sauer-sundstrand company
Heffernan, V., (2001), Buildings: one wall centre mechanical and electrical systems
Swaffield, J. A. and Jack, L. B., (2005), Simulation and analysis of airborne cross-contamination routes due to the operation of building drainage and vent systems
Barrett, D., (1998), The renewal of trust in residential construction: an inquiry into the quality of condominium construction in British Columbia
Barrett, D., (2000), The renewal of trust in residential construction part II: commission of inquiry into the quality of condominium construction in British Columbia
Boei, W., (2002), Thousands more leaky condos as crisis spreads to highrises: Problems are surfacing with mould, exterior panels
UDI, (2000), Submission to the Second Commission of Inquiry into the Quality of Condominium Construction
Hill, D., (1996), Analysis of the hygrothermal behaviour of residential high-rise building components
Limited and Inc , (1991), Development of design procedures and guidelines for reducing electric demand by air leakage control in high-rise residential buildings: final report
Canada , (1998), Establishing the protocol for measuring air leakage and air flow patterns in high-rise apartment buildings
Gulay, G.W., C.D. Stewart, G.J. Foley, (1993), Field investigation survey of airtightness, air movement and indoor air quality in high-rise apartment buildings: summary report
Alfawakhiri, F., (2002), Buildings: structures - day of reckoning
Chalifour and Inc. , (1991), Air tightness, air movement and indoor air quality in Quebec high-rise apartment buildings
Hill, D., (1996), Analysis of the hygrothermal behaviour of residential high-rise building components
Center and Inc , (1996), Comparative costs of alternative building systems in new residential construction
Drysdale, R.G, (1990), Construction problems in multi-family residential buildings
Limited and Inc , (1991), Development of design procedures and guidelines for reducing electric demand by air leakage control in high-rise residential buildings: final report
CMHC , (1988), Drying characteristics in tibmer frame walls of low-rise residential housing
Ojanen, T. and Kumaran, M. K., (1995), Effect of exfiltration on the hygrothermal behaviour of a residential wall assembly: results from calculations and computer simulations
BC , (1998), Improving quality and accountability in residential construction: discussion paper
Karagiozis, A.N. and M.Salonvaara, (1995), Influence of material properties on the hygrothermal performance of a high-rise residential wall
Lstiburek, Joseph W. and Carmody, J., (1993), Moisture control handbook: principles and practices for residential and small commercial buildings
Rousseau, J., (1983), Rain penetration and moisture damage in residential construction
Bowman, D.A. and Thorsell, S.R, (2001), Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
Clarke, J. A., Hensen, J. and Janak, M., (1998), Integrated building simulation: state-of-the-art, Introducing Building Energy Simulation Classes on the Web
Pasqualetto, L., (1995), Validation of building energy simulation programs
Nakhi, A.E, (1995), Adaptive construction modelling within whole building dynamic simulation
Athienitis, A. K., (1995), Building simulation in a mathematical programming environment
Bednar, T., (2000), Influence of the variation of material properties and uncertainties of the material data model on the results of moisture performance calculations of constructions
Kusuda, T., (1999), Early history and future prospects of building system simulation
Nielsen, A., (1999), 3D room models for moisture balance calculations
Andr¨¦, P., (2000), Overview of simulation research in Belgium and Luxembourg
Augenbroe, G., (2002), Trends in building simulation
Choi, E. C. C., (2000), Variation of wind-driven rain intensity with building orientation
Curcija, D., (0), Role of computer simulation in window certification
Lis?, K.R, (2001), Effects of climate change on built environments
UNFCCC , (2001), Report of the global environment facility to the conference, note by the secretariat
Roodman, D.M. and N. Lenssen, (1995), A building revolution: how ecology and health concerns are transforming construction
Lowe, R., (2001), A review of recent and current initiatives on climate change and its impact on the built environment: impact, effectiveness and recommendations final report
Deal, B., (2001), Ecological urban dynamics: the convergence of spatial modelling and sustainability
Eisenberg, D., (1997), Sustainability and the building codes
UKCIP/EPSRC, (2001), Workshop report: Climate change and the built environment research
Mokhtarzadeh-dehghana, R., (2007), Natural convection between two floors of a building via a horizontal opening -- Measurements in a one-half scale model
DMO Associates, (1999), Drying of walls with ventilated stucco cladding parametric analysis
Fisette, P., (1999), Housewraps, felt paper and weather penetration barriers
Gayo, E., Palomo, A. and Macias, A., (1993), Infrared thermography as a tool for studying the movement of water through some building materials. Part 1. Capillary moisture
Navon, U. and Fenn, J. B., (1971), Interfacial mass and heat transfer during evaporation. I. An experimental technique and some results with a clean water surface
CMHC , (1997), Testing rainscreen wall and window systems: the cavity excitation method
Science and Technology , (1995), Monitoring of cavity humidity levels at Canada life building
Skerlj, P.S. and D. Surry, (1994), A study of mean pressure gradients, mean cavity pressures, and resulting residual mean pressures across a rainscreen for a representative building
Group , (1996), The Zero-Cavity and DPV Wall Project
Kontopidis, T., (1992), Control of rain penetration through pressurized cavity walls
Mcbaina, G. D., (1997), Natural convection with unsaturated humid air in vertical cavities
Lorentea, S. and Bejan, A., (2002), Combined `flow and strength' geometric optimization: internal structure in a vertical insulating wall with air cavities and prescribed strength
Roots, P., (1997), Heat transfer through a well insulated external wooden frame wall- an investigation of the effects of normal defects in the insulation resulting from incident wind and air flow through the wall
Gao, J., Zhang, X., Zhao,
.N., (2008), Numerical determination of convection coefficients for internal surfaces in buildings dominated by thermally stratified flows
Wanga, L. and Chen, Q., (2008), Evaluation of some assumptions used in multizone airflow network models
Vera, S., Fazio, P. and Rao, J., (2009), Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test-hut: Part 2- CFD study
Myers, J. H., (1984), Aluminum and vinyl siding on historic buildings, the appropriateness of substitute materials for resurfacing historic wood frame buildings
DMO Associates, (1999), Drying of walls with ventilated stucco cladding parametric analysis
Damery, D. T. and Fisette, P., (2001), Decision making in the purchase of siding: a survey of architects, contractors, and homeowners in the U.S. Northeast
Lis?, K.R, (2001), Effects of climate change on built environments
UNFCCC , (2001), Report of the global environment facility to the conference, note by the secretariat
FCCC , (2001), Input to the World Summit on Sustainable Development. Note by the secretariat
IPCC , (2001), Climate change 2001: the scientific basis
IPCC , (2001), Climate change 2001: impacts, adaptation, and vulnerability
Lowe, R., (2001), A review of recent and current initiatives on climate change and its impact on the built environment: impact, effectiveness and recommendations final report
WMO, (2002), WMO statement on the status of the global climate in 2001
UKCIP/EPSRC, (2001), Workshop report: Climate change and the built environment research
Luukkanen, J. and Kaivo-oja, J., (2002), Meaningful participation in global climate policy? Comparative analysis of the energy and CO2 efficiency dynamics of key developing countries
Hosni, M. H., Sipes, J. M. and Wallis, M. H., (1999), Experimental results for diffusion and infiltration of moisture in concrete masonry walls exposed to hot and humid climates
Nielsen, A., (1995), Use of statistics for prediction of risk for condensation in a wall construction cold walls radiation technique: the case of quality of air
Sherwood, G. E., (1983), Condensation potential in high thermal performance walls -- cold winter climate
Sim?es, Branco, B. and A. Tadeu, (2002), Definition of two-dimensional condensation via BEM, using the Glaser method approach
Couvillion, R. J. and Hawisa, J. S., (1993), Heat and moisture transport with internal condensation in a fibrous insulation slab with impermeable boundary
Sanders, C. H., (1995), Design parameters used to avoid interstitial condensation for a range of climates
Hens, J. A. and H. Hens, (2003), Interstitial condensation due to air leakage: a sensitivity analysis
Marek, R. and Straub, J., (2001), Analysis of the evaporation coefficient and the condensation coefficient of water
Sill, B. L., (1983), Free and forced convection effects on evaporation
Shah, M. M., (2002), Evaluation of available correlations for rate of evaporation from undisturbed water pools to quiet air
Tang, R. and Etzion, Y., (2004), Comparative studies on the water evaporation rate from a wetted surface and that from a free water surface
Navon, U. and Fenn, J. B., (1971), Interfacial mass and heat transfer during evaporation. I. An experimental technique and some results with a clean water surface
Bowen, I. S., (1926), The ratio of heat losses by conduction and by evaporation from any water surface
Sartori, E., (2000), A critical review on equations employed for the calculation of the evaporation rate from free water surfaces
Seaden, G., (1997), The future of national construction research organizations--scenarios for the changing roles, functions, research agendas and funding
Drysdale, R.G, (1990), Construction problems in multi-family residential buildings
CICA, (2000), Industry as a partner for sustainable development: construction
Roodman, D.M. and N. Lenssen, (1995), A building revolution: how ecology and health concerns are transforming construction
Kozak, R. A. and Cohen, D. H., (1995), Assessment of the attitudes and perceptions of architects and structural engineers towards the environmental impact of structural material use in commercial construction
Inc and Council , (1996), Sustainable building technical manual: green building design, construction, and operations
Bazley, B. I., (2002), Technology Dissemination: Triggering Innovation Adoption in Canada's Home Construction Industry
Egan, J., (1998), Rethinking construction: the report of the construction task force
Fairclough, J., (2002), Rethinking construction innovation and research, a review of government R&D policies and practices
Barrett, D., (1998), The renewal of trust in residential construction: an inquiry into the quality of condominium construction in British Columbia
Seaden, G., (1997), The future of national construction research organizations--scenarios for the changing roles, functions, research agendas and funding
Fazio, P., H. Ge, and J. Rao, (2001), Measuring air leakage of full-scale curtain wall sections using a non-rigid air-chamber method
ASTM , (2000), E547-00: water penetration of exterior windows, curtain walls, and doors by cyclic static air pressure differential
ASTM , (2000), E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
AAMA , (1994), 501.1: Standard test method for metal curtain walls for water penetration using dynamic pressure
Ge, H., Fazio, P. and Rao, J., (2001), Experimental study of temperature distributions across two curtain wall systems
Wong_Wang_Sie, W., (2007), Analysis and design of curtain wall systems for high rise buildings
Wang, Y., (2006), Structural behavior and design of two custom aluminum extruded shapes in custom unitized curtain wall systems
Yeomans, D., (2001), The origins of the modern curtain wall
Richman, R. C. and Pressnail, K. D., (2009), A more sustainable curtain wall system: Analytical modeling of the solar dynamic buffer zone (SDBZ) curtain wall
Bouden, C., (2007), Influence of glass curtain walls on the building thermal energy consumption under Tunisian climatic conditions: The case of administrative buildings
Song, S., Yi, J. and Koo, B., (2008), Insulation plan of aluminum curtain wall-fastening unit for high-rise residential complex
Richman, R. and Pressnail, K. D., (2009), Quantifying and predicting performance of the solar dynamic buffer zone (SDBZ) curtain wall through experimentation and numerical modeling
DOE, (0), Before You Design, Build Or Renovate. Healthy and Affordable Housing:practical Recommendations for Building, Renovating and Maintaining Housing
Burnett, E. F. P., (2004), Development of design strategies for rainscreen sheathing membrane performance in wood frame walls
Chistophersen, J. (Ed), (2004), Universal design -- with contribution from Asia, Australia, North America and Europe
Pushkar, S. and Katz, A., (2005), A methodology for design of environmentally optimal buildings by variable grouping
Salonvaara, M. H. and A. N. Karagiozis, (1998), EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
Smulski, S., (1999), Durability of energy-efficient wood-frame houses
PATH , (1999), Improving durability in housing - background paper
Partners and LLC , (2004), Building moisture and durability - past, present and future work
Center and Inc. , (2001), Assessing housing durability: a pilot study
Sj?str?m, C. (Ed), (2004), Guide and bibliography to service life and durability research for buildings and components
Derome, D., (2000), Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope
Pietrzyk, K., Kurkinen, K., Hagentoft,, (2004), An example of application of limit state approach for reliability analysis of moisture performance of a building component
Sj?str?m, C. (Ed), (2004), Guide and bibliography to service life and durability research for buildings and components
ASTM , (1985), C177-85 Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus
Center and Inc , (1996), Comparative costs of alternative building systems in new residential construction
DOE , (2001), Building envelope technology roadmap: a 20-year industry plan for building envelopes
Anderlind, G., (1997), High accuracy heat flow calculation - a method to calculate the heat flow for an arbitrary wall with constant material properties in a natural climate
Athienitis, A. K., (1995), Building simulation in a mathematical programming environment
Barrett, D., (1998), The renewal of trust in residential construction: an inquiry into the quality of condominium construction in British Columbia
Siy, E., L. Koziol and D. Rollins, (2001), The state of the states: assessing the capacity of states to achieve sustainable development through green planning
Zwayer, G. L., (1996), EIFS: When It Works, When It Does Not
Remmele, T. E., (1996), EIFS Resistance to Water Penetration and Evaluation in Accordance with EIMA Method
Posey, J. and J. A. Ulooswyk, (1998), Exterior insulated finish systems (EIFS) field performance evaluation, Air Quality Indices: A Review
Salonvaara, M. H. and A. N. Karagiozis, (1998), EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
Bowman, D.A. and Thorsell, S.R, (2001), Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
Hens, H. and J. Carmeliet, (2002), Performance prediction for masonry walls with EIFS using calculation procedures and laboratory testing
Mukhopadhyaya, P., Kumaran, K., Tariku, F. and Reenen, D.V., (2003), Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
Bain, N., (1999), Managing major repairs - a condominium owner's guide
Cohen et al. , (1998), Synthetic stucco (EIFS) settlement will provide up to $20 million for homeowners nationwide
Cohen et al. , (1998), Synthetic stucco (EIFS) settlement will provide up to $20 million for homeowners nationwide
BC , (1998), Improving quality and accountability in residential construction: discussion paper
Carroll, M., (2001), Wall sheathing creates headaches for builder, homeowners
Inc , (2000), Wall moisture problems in Alberta dwellings
Pasanen, A. L., S. Rautiala, et al., (2000), The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials
Beasley, K., (2001), Contemporary and traditional wall-system failures
Rivin, R., (2001), Building envelope defects and interior mold remediation
Schmidt-doehl, F. and Rostasy, F. S., (1999), Model for the calculation of combined chemical reactions and transport processes and its application to the corrosion of mineral-building materials: Part I. Simulation model
UDI, (2000), Submission to the Second Commission of Inquiry into the Quality of Condominium Construction
Mukhopadhyaya, P., Kumaran, K., Tariku, F. and Reenen, D.V., (2003), Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
Hazlen, D. G. and Morris, P. I., (2002), Evaluation of vapour diffusion ports on drying of wood-frame walls under controlled conditions
Group , (2002), Alternative wall systems for low-rise housing
Erman, E., (2003), Timber joint design: the geometric breakdown method
Karagiozis, A., (2002), Building enclosure hygrothermal performance study phase I
ASCE, (2000), Guideline for condition assessment of the building envelope
BSI, (2001), BS EN 12865:2001 Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure
BSI, (1997), 97/108355 DC, Hydrothermal performance of buildings under pulsating air pressure
Goldberg, L.F. and Aloi, T., (2001), Space humidity/interior basement wall insulation moisture content relationships with and without vapor retarders
Padfield, T., (1999), Humidity buffering of interior spaces by porous,absorbent insulation, part of hygrothermal properties of alternative insulation materials
Kozak, R. A. and Cohen, D. H., (1995), Assessment of the attitudes and perceptions of architects and structural engineers towards the environmental impact of structural material use in commercial construction
CWC, (1995), Environmental effects of building materials; wood the renewable resource
Works and Canada , (2000), The environmentally responsible construction and renovation handbook, 2nd Ed
Anderlind, G., (1997), High accuracy heat flow calculation - a method to calculate the heat flow for an arbitrary wall with constant material properties in a natural climate
Tsongas, G., (1992), A field study of indoor moisture problems and damage in new northwest homes
Christensen, G. and Bunch-nielsen, T., (2002), A "follow-up" study of moisture conditions and performance of moisture sensors in flat roofs provided with exterior insulation in the late seventies
Forintek Canada Corporation, (2001), Guidelines for on-site measurement of moisture in wood building materials
Depani, S. and Fazio, P., (2005), Airtightness testing of two- and three-unit buildings with a single fan
Center and Inc. , (2002), Water intrusion evaluation for caulkless siding, window, and door systems-laboratory testing results
Strachan, P. A., (2008), Simulation support for performance assessment of building components
Desmarais, G., (2000), Impact of added insulation on the hygrothermal performance of leaky exterior wall assemblies
Derome, D., (2000), Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope
Christensen, G. and Bunch-nielsen, T., (2002), A "follow-up" study of moisture conditions and performance of moisture sensors in flat roofs provided with exterior insulation in the late seventies
Gudmundsson, K., (2002), Isotopic analysis of moisture transport
Nordtest, (1993), Building materials and components in the vertical position: exposure to accelerated climatic strains
Hosni, M. H., Sipes, J. M. and Wallis, M. H., (1999), Experimental results for diffusion and infiltration of moisture in concrete masonry walls exposed to hot and humid climates
Hameury S. & Sterley M., (2006), Magnetic resonance imaging of moisture distribution in Pinus sylvestris L. exposed to daily indoor relative humidity fluctuations
Bassett, M., Mcneil, S., (2009), Ventilation Measured in the Wall Cavities of High Moisture Risk Buildings
Vera, S., Fazio, P. and Rao, J., (2010), Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study
Holm, A. and Lengsfeld, K., (2007), Moisture-buffering effect - experimental investigations and validation
Smith, R. C., (2009), Vapour diffusion control in framed wall systems insulated with spray polyurethane foam
Gaspar, P. L. and de_Brito, J., (2008), Quantifying environmental effects on cement-rendered facades: A comparison between different degradation indicators
Gaylarde, C. C. and Gaylarde, P. M., (2005), A comparative study of the major microbial biomass of biofilms on exteriors of buildings in Europe and Latin America
Kuntz, M. and van_Mier, J. G. M., (1997), Field evidences and theoretical analysis of the gravity-driven wetting front instability of water runoffs on concrete structure
Zhu, D., Mallidi, S.R. and Fazio, P., (1995), Approach for urban driving rain index by using climatological data recorded at suburban meteorological station
Rivard, H., (1994), Integration of the Building Envelope Design Process
Zhu, D., (1995), Quantitative studies driving rain exposure on a vertical building fa?ade in an urban area
Hegazy, T., (1993), Integrated bid preparation with emphasis on risk assessment using neural networks
Gowri, K., (1991), Knowledge-Based System Approach to Building Envelope Design
Mokhtar, A., (1991), A Dynamic Model for Daylighting Impact on Energy Savings in Direct Passive Solar Buildings
Auger, M., (1990), Experimental Comparison of Three Heating Systems with Respect to Heat Distribution and Thermal Comfort
Turaga, M., (1989), Experimental Performance Evaluation of Multi-Row, Plate Finned-Tube, Direct Expansion Air Cooling and Dehumidifying Coils
Leonard, C.A, (1988), The effects of change orders on productivity
Th¨¦berge, P., (1987), Fast Tracking of Construction Projects: Analysis and Assessment
Zmeureanu, R., (1987), Computer simulation of the effect of building thermal mass on the thermal loads
Arlani, A., (1986), Optimum Building Design: Decision Making
Al-Kalamchi, A., (1984), Analytical and experimental study of the effects of the oil on the heat transfer coefficient of condensing refrigerant vapour at the external surface of plain horizontal tubes
Gowri, K., (1984), Analysis of a Folded Plate Sandwich Panel Roof System Using Assumed Stress Hybrid Elements
El-Diasty, R., (1983), An Investigation of Window Systems for Reduced Energy Consumption
Guit¨¦, P., (1983), Fabrication d'une brique l¨¦g¨¨re et isolante ¨¤ partir d'argile de sciures de bois et de d¨¦chets de verre
El-Hakim, N., (1981), Diaphragm-Action of Asbestos Cement Decks
Hussein, R., (1980), Structural behaviour of sandwich panels
Chockalingham, S., (1979), A Study of Shear Diaphragms and Clad Multistory Frames
Rizzo, S., (1979), A study of sandwich-panel building structures
Hassan, F., (1978), Mechanical Properties of One-Part Urethane Sealants
Moselhi, O., (1978), Analysis of perforated walls and tube-type tall building structures
Khalil, M., (1973), The Design, Development and Optimization of Mechanical Connection Systems in Sandwich Panel Construction
Salahuddin, A., (1971), Stresses in the Adhesive Layer of Bonded Mid-Panel Joints Connecting Sandwich Panels
Fazio, P., (1964), Continuous folded plate structures under uniform load
Koroth, S., (1997), Evaluation and improvement frost durability of clay bricks
Budaiwi, I., (1994), Modelling of indoor air humidity transient behaviour: effect on exterior wall mositure performance
Gerbasi, D., (2000), The energy performance of the NOVTEC Advanced House
Corsi, M., (2000), Evaluation of the potential impact of electrochromic windows on the energy performance of commercial buildings
Derome, D., (2000), Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope
Desmarais, G., (2000), Impact of added insulation on the hygrothermal performance of leaky exterior wall assemblies
Iliescu, S., (2000), A case-based reasoning approach to the designing of building envelopes
Mokhtar, A. H. M., (1998), An information model for managing design changes in a collaborative multidisciplinary design environment
Depani, S., (1999), A study on single blower door methods for multifamily buildings in Montreal (Quebec)
Ge, H., (2003), Study on overall thermal performance of metal curtain walls
Carll, C. G. and Highley, T. L., (1999), Decay of wood and wood-based products above ground in buildings, Mechanism of Brown-Rot Decay: Paradigm or Paradox
Singh, J., (1994), Building mycology -- management of decay and health in buildings
Adan, O. C. G., (1995), Response of fungi to transient relative humidities
Tsongas, G. and Olson, J., (1995), Tri State homes: a case study of extensive decay in the walls of older manufactured homes with exterior vapor retarder
Pasanen, A. L., S. Rautiala, et al., (2000), The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials
Smulski, S., (1996), Wood-destroying fungi in residential construction
Korpi, A. Pasanen,A.L. and P. Pasanen, (1998), Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions
Hyv?rinen, A., (2002), Characterizing moisture damaged buildings - environmental and biological monitoring
Hennebert, G. L. and Gams, W., (2002), Analysis of possibilities to amend or delete Art. 59 of the international code of botanical nomenclature to achieve a unified nomenclature and classification of the fungi
Heinsohn, P., (2002), The relationship between fungal growth in wall cavities and the fungal ecology of indoor environments
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Palfreyman, J.W., Smith, D. and Low, G.A, (2001), The use of representative modelling to test the efficacy of environmental control treatments for the dry rot fungus Serpula lacrymans: simulating the infection and the treatment of flooring timber
Adams, S., (2002), Identification and treatment of toxic molds
Buttner, M. P. and Stetzenbach, L. D., (1996), Use of an experimental room for monitoring of airborne concentrations of microorganisms, glass fibers, and total particles
Kulmala, M., Asmi, A. and Pirjola, L., (1999), Indoor air aerosol model: the effect of outdoor air, filtration and ventilation on indoor concentrations
Vice, S.J, (2000), Indicators of mold growth in indoor environments
Di-giovanni, F. and Kevan, P. G., (1997), Factors affecting pollen dynamics and its importance to pollen contamination: a review
Spicer, R. and Gangloff, H., (2005), Establishing site specific reference levels for fungi in outdoor air for building evaluation
Millington, W. M. and Corden, J. M., (2005), Long term trends in outdoor Aspergillus/Penicillium spore concentrations in Derby, UK from 1970 to 2003 and a comparative study in 1994 and 1996 with the indoor air of two local houses
Spicer, R.C. and Gangloff, H.J, (2000), Limitations in application of Spearman's rank correlation to bioaerosol sampling data
Szponar, B. and Larsson, L., (2000), Determination of microbial colonisation in water-damaged buildings using chemical marker analysis by gas chromatography-mass spectrometry
Yacher, J. M. and Burroughs, W., (1997), In-depth survey report concentration of metalworking mists before and after installation of a commercial air cleaner at sauer-sundstrand company
Lawryk, N. and Chen, B., (2002), Portable x-ray fluorescence spectrometry for measuring multiple airborne metals: a NIOSH screening method under development
Mitakakis, T. Z. and Mcgee, P. A., (2000), Reliability of measures of spores of Alternaria and pollen concentrations in air over two towns in rural Australia
Summerbell, R. C., (2002), Sampling methodology for fungal bioaerosols and amplifiers in cases of suspected indoor mold proliferation
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Adams, S., (2002), Identification and treatment of toxic molds
Gao, P., Korley, F., Martin, J. and Chen, B., (2002), Determination of unique microbial volatile organic compounds produced by five Aspergillus species commonly found in problem buildings
Fischer, G. and Dott, W., (2002), Quality assurance and good laboratory practice in the mycological laboratory - compilation of basic techniques for the identification of fungi
Sunessona, A., Nilssona, C. and Anderssona, B., (1995), Evaluation of adsorbents for sampling and quantitative analysis of microbial volatiles using thermal desorption-gas chromatography
Andersen, B. and Nissen, A. T., (2000), Evaluation of media for detection of Stachybotrys and Chaetomium species associated with water-damaged buildings
Sterling, M. and Levetin, C.R.&.E, (1999), An evaluation of two methods used for microscopic analysis of airborne fungal spore concentrations from the Burkard spore trap
Duchaine, C. and M¨¦riaux, A., (2001), The importance of combining air sampling and surface analysis when studying problematic houses for mold biodiversity determination
Larsen, T. O. and Frisvad, J. C., (1994), A simple method for collection of volatile metabolites from fungi based on diffusive sampling from Petri dishes
Korpi, A., Pasanen, A. and Viitanen, H., (1999), Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
Kreja, L. and Seidel, H., (2002), Evaluation of the genotoxic potential of some microbial volatile organic compounds (MVOC) with the comet assay, the micronucleus assay and the HPRT gene mutation assay
Vice, S.J, (2000), Indicators of mold growth in indoor environments
Nielsen, K.F, (2002), Mould growth on building materials: Secondary metabolites, mycotoxins and biomarkers
Wilkins, F., Nielsen, F. and Larsen, K., (1999), MVOC analysis for detection of microbial growth in buildings I. Variation of MVOC and mycotoxin patterns in aspergillus versicolor
Wilkins, K. and Abbott, S. P., (2000), Volatile metabolite patterns for the identification of common indoor mold species
Larsson, L., (1994), Determination of microbial chemical markers by gas chromatography-mass spectrometry - potential for diagnosis and studies on metabolism in situ
Nielsen, K. F. and Madsenc, J.?., (2000), Determination of ergosterol on mouldy building materials using isotope dilution and gas chromatography--tandem mass spectrometry
Bjurman, J., (1994), Ergosterol as an indicator of mould growth on wood in relation to culture age, humidity stress and nutrient level
Nielsen, K.F., (2003), Mycotoxin production by indoor molds
Gutarowska, B. and Zakowska, Z., (2002), Elaboration and application of mathematical model for estimation of mould contamination of some building materials based on ergosterol content determination
Saraf, A., Larsson, L., Burge, H. and Milton, D., (1997), Quantification of ergosterol and 3-hydroxy fatty acids in settled house dust by gas chromatography-mass spectrometry: Comparison with fungal culture and determination of endotoxin by a Limulus amebocyte lysate assay
Sudakin, D.L, (1998), Toxigenic fungi in a water-damaged building: An intervention study
Gallo, F. M., (2000), Mold damage due to moisture intrusion
Mccrady, E., (1999), Mold: the whole picture. pt. 2, assessment of mold problems
Nielsen, A., (2002), Use of FMEA - failure modes effects analysis on moisture problems in buildings
Hyv?rinen, A., (2002), Characterizing moisture damaged buildings - environmental and biological monitoring
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Casarona, R. B. and Mcqueen, A. E., (2002), Legal issues involving mold contamination, BSC Final Report: Lessons Learned from Building America Participation
Bryson, D. K. and Rhine, J. R., (0), Solving water intrusion and mold problems in North Carolina, legal claims arising out of mold and water problems
Bradford, M., (2002), Mold remediation being hampered by lack of standards
Sudakin, D. L., (2000), Stachybotrys chartarum: Current Knowledge of Its Role in Disease
Shum, M. and Goodman, M., (2002), An overview of the health effects due to mold exposure, An Overview of Residential Ventilation Activities in the Building America Program (Phase I)
Pasanen, A. L., S. Rautiala, et al., (2000), The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials
Pasanen, A. L., J. P. Kasanen, et al., (2000), Fungal growth and survival in building materials under fluctuating moisture and temperature conditions
Pasanen, P.O. et al, (2001), Fungal growth on wood surfaces at different moisture conditions in crawl spaces
Korpi, A. Pasanen,A.L. and P. Pasanen, (1998), Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions
Carll, C. G. and Highley, T. L., (1999), Decay of wood and wood-based products above ground in buildings, Mechanism of Brown-Rot Decay: Paradigm or Paradox
Sedlbauer, K., (2002), Prediction of mould growth by hygrothermal calculation
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Janinska, B., (2000), Environmental requirements for fungi
Viitanen, H. and Bjurman, J., (1995), Mould growth on wood at fluctuating humidity conditions, energy efficiency and energy conservation: policies, programmes and their effectiveness
Kreja, L. and Seidel, H., (2002), Evaluation of the genotoxic potential of some microbial volatile organic compounds (MVOC) with the comet assay, the micronucleus assay and the HPRT gene mutation assay
Shum, M. and Goodman, M., (2002), An overview of the health effects due to mold exposure, An Overview of Residential Ventilation Activities in the Building America Program (Phase I)
Husman, T., (1996), Health effects of indoor-air microorganisms
Kreja, L. and Seidel, H., (2002), Evaluation of the genotoxic potential of some microbial volatile organic compounds (MVOC) with the comet assay, the micronucleus assay and the HPRT gene mutation assay
Smulski, S., (1996), Wood-destroying fungi in residential construction
Casarona, R. B. and Mcqueen, A. E., (2002), Legal issues involving mold contamination, BSC Final Report: Lessons Learned from Building America Participation
Bryson, D. K. and Rhine, J. R., (0), Solving water intrusion and mold problems in North Carolina, legal claims arising out of mold and water problems
Rylander, R., (1997), Investigations of the relationship between disease and airborne (1 -> 3)-beta-D-glucan in buildings
Engelhart, S. and Exner, M., (2002), Fungi in indoor air - Determination of mesophilic and thermo-tolerant fungi in indoor air using occupational standards on bioaerosols
Gutarowska, B. and Zakowska, Z., (2002), Elaboration and application of mathematical model for estimation of mould contamination of some building materials based on ergosterol content determination
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Morey, P. and Hull, M., (2002), Water leakage from exterior walls as an indicator of degraded air quality
Eckhardt, F. E. W., (1994), Microbial VARIETY of materials-simulation, case histories, and countermeasures: microbial variety on materials and means of contamination
Salo, P., (2001), Identifying and preventing fungal contamination problems in new home construction
Rand, T. G., (2001), An assessment of mold contamination problems in Atlantic Canada schools: mold burdens, amplifying sites and benefits of proactive school inspection policies
Becker, R. and Putterman, M., (2002), Patterned mold growth on rendered facades in Israel - A consequence of substrate thermal insulation
ASTM, (2000), D3274-95 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
Bradford, M., (2002), Mold remediation being hampered by lack of standards
Duchaine, C., Grimard, Y. and Cormier, Y., (2000), Influence of building maintenance, environmental factors, and seasons on airborne contaminants of swine confinement buildings.
Nielsen, K.F, (2002), Mould growth on building materials: Secondary metabolites, mycotoxins and biomarkers
Pasanen, A-L, (2000), Evaluation of indoor fungal exposure
Korpi, A. Pasanen,A.L. and P. Pasanen, (1998), Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions
Korpi, A., (2001), Fungal volatile metabolites and biological responses to fungal exposure
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Wilkins, K. and Larsen, K., (1995), Variation of volatile organic compound patterns of mold species from damp buildings
Gao, P., Korley, F., Martin, J. and Chen, B., (2002), Determination of unique microbial volatile organic compounds produced by five Aspergillus species commonly found in problem buildings
Sunessona, A., Nilssona, C. and Anderssona, B., (1995), Evaluation of adsorbents for sampling and quantitative analysis of microbial volatiles using thermal desorption-gas chromatography
Tranthim-fryer, D. J., Hansson, R. C. and Norman, K. W., (2001), Headspace/solid-phase microextraction/gas chromatography-mass spectrometry: a screening technique for the recovery and identification of volatile organic compounds (VOC's) in postmortem blood and viscera samples
Korpi, A., Pasanen, A. and Viitanen, H., (1999), Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
Kreja, L. and Seidel, H., (2002), Evaluation of the genotoxic potential of some microbial volatile organic compounds (MVOC) with the comet assay, the micronucleus assay and the HPRT gene mutation assay
Vice, S.J, (2000), Indicators of mold growth in indoor environments
Nielsen, K.F, (2002), Mould growth on building materials: Secondary metabolites, mycotoxins and biomarkers
Wilkins, F., Nielsen, F. and Larsen, K., (1999), MVOC analysis for detection of microbial growth in buildings I. Variation of MVOC and mycotoxin patterns in aspergillus versicolor
Horner, E. and Miller, J. D., (2001), Microbial volatile organic compounds with emphasis on those arising from filamentous fungal contaminants of buildings
Romain, M. K. A. and Nicolas, J., (2005), Microbial volatile organic compounds as indicators of fungi. Can an electronic nose detect fungi in indoor environments?
Wessen, B. and Schoeps, K., (1996), Microbial volatile organic compounds-what substances can be found in sick buildings?
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Fischer, G. and Dott, W., (2002), Quality assurance and good laboratory practice in the mycological laboratory - compilation of basic techniques for the identification of fungi
Nielsen, K.F, (2002), Mould growth on building materials: Secondary metabolites, mycotoxins and biomarkers
Crawford, D.M. and Clausen, C.A, (1999), Evaluation of wood treated with copper-based preservatives for Cu loss during exposure to heat and copper-tolerant Bacillus licheniformis
Regalado, L. and S¨¢nchez, C., (2002), Spore morphology as a taxonomic tool in the delimitation of three Asplenium L. species complexes (Aspleniaceae: Pteridophyta) in Cuba
Lawryk, N. and Chen, B., (2002), Portable x-ray fluorescence spectrometry for measuring multiple airborne metals: a NIOSH screening method under development
Morey, P. and Hull, M., (2002), Water leakage from exterior walls as an indicator of degraded air quality
Ren, P., Jankun, T.M. and Leaderer, B.P, (1999), Comparisons of seasonal fungal prevalence in indoor and outdoor air and in house dusts of dwellings in one Northeast American county
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
Sterling, M. and Levetin, C.R.&.E, (1999), An evaluation of two methods used for microscopic analysis of airborne fungal spore concentrations from the Burkard spore trap
Nelson, B. D., (2001), Stachybotrys chartarum: the toxic indoor mold
Sudakin, D. L., (2000), Stachybotrys chartarum: Current Knowledge of Its Role in Disease
Andersen, B. and Nissen, A. T., (2000), Evaluation of media for detection of Stachybotrys and Chaetomium species associated with water-damaged buildings
Korpi, A., Pasanen, A. and Viitanen, H., (1999), Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
Lippiatt, B.C, (2002), BEEs 2.0, building for environmental and economic sustainability-technical manual and user guide
B?rjesson, P. and Gustavsson, L., (2000), Greenhouse gas balances in building construction: wood versus concrete from life-cycle and forest land-use perspectives
Buchanan, A. H., (2007), Energy and CO2 advantages of wood for sustainable buildings
Roodman, D.M. and N. Lenssen, (1995), A building revolution: how ecology and health concerns are transforming construction
Siy, E., L. Koziol and D. Rollins, (2001), The state of the states: assessing the capacity of states to achieve sustainable development through green planning
EPA , (2002), A brief guide to mold, moisture, and your home
IEA , (1990), Annex XIV: Condensation and Energy. Volume 2: Guidelines & Practice and Volume 3: Catalog of Material Properties
Agency , (1990), Condensation and Energy, Guidelines and Practice, Vol 2
Limited and Inc , (1991), Development of design procedures and guidelines for reducing electric demand by air leakage control in high-rise residential buildings: final report
Anon, (2003), Respiratory recommendations from EPA's mold remediation guidelines
Builders , (2000), Residential Structural Design Guide: 2000 Edition, A State--of--the--Art Reviiew and Application of Engineering Information for Light--Frame Homes, Aparttmentts, and Townhouses
Kalagasidis, S.A., (2004), HAM-tools: An integrated simulation tool for heat, air and moisture transfer analyses in building physics
Luikov, A.V., (1966), Heat and mass transfer in capillary-porous bodies
prEN 15026:2004, (2004), Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
Perr¨¦, P., (2007), Multiscale aspects of heat and mass transfer during drying
van_Schijndel, A.W.M., (2009), The effect of micro air movement on the heat and moisture characteristics of building constructions.
Kalamees, T. and Vinha, J., (2003), Hygrothermal calculations and laboratory tests on timber-framed wall structures
Mukhopadhyaya, P., Kumaran, K., Tariku, F. and Reenen, D.V., (2003), Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
Maref, W., Lacasse, M. A. and Booth, D. G., (2002), Executive Summary of Research Contributions Related to Moisture Management of Exterior Wall Systems (MEWS) - Modeling, Experiments, and Benchmarking
Holm, A., (2001), Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
Holm, A.H. and Kuenzel, H.M, (2002), Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
Mukhopadhyaya, P. and Kumaran, M. K., (2000), Prediction of moisture response of wood frame walls using IRC's advanced hygrothermal model (hygIRC)
Kumaran, M.K., (2002), Protecting the long-term performance of building envelope components
Burch, D.M. and Walton, G.N, (1997), A mathematical analysis of moisture and heat transfer in the roof cavities of manufactured housing
Simonson, C. J., Salonvaara, M., Ojanen, T., (2004), Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part I -- field measurements
Qin, M
., Ait-mokhtar, R. B. A. and Nilsson, L., (2007), Nonisothermal moisture transport in hygroscopic building materials: modeling for the determination of moisture transport coefficients
W?linder, M., (2000), Wetting phenomena on wood- factors influencing measurements of wood wettability
Chang, W. J. and C. I. Weng, (1997), An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture
Bellia, L. and Minichiello, F., (2003), A simple evaluator of building envelope moisture condensation according to an European Standard
Cunninghama, M. J., (1988), The moisture performance of framed structures - A mathematical model
Wang, J. K. and Hagentoft, C., (2001), A numerical method for calculating combined heat, air and moisture transport in building envelope components
Chang, W. J. and C. I. Weng, (1997), An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture
Sim?es, Branco, B. and A. Tadeu, (2002), Definition of two-dimensional condensation via BEM, using the Glaser method approach
Hens, H., (1996), Heat, air and moisture transfer in insulated envelope parts. Final Report, Volume 1, Modelling
Wang, J. K. and Hagentoft, C.E, (2000), A numerically stable algorithm for simplified calculations of combined heat, air and moisture transport
CMHC , (1991), CMHC research project - testing of air barriers construction details
Ojanen, T. and Kumaran, M. K., (1995), Effect of exfiltration on the hygrothermal behaviour of a residential wall assembly: results from calculations and computer simulations
Ozaki, A., (2000), Systematic analysis model on combined heat and water transfere of gaseous, liquid and solid phase water system, based on thermodynamic energy
Nofal, M. and M.K. Kumaran, (2000), On implementing experimental biological damage-functions models in durability assessment systems
Lu, X. S. and Viljanen, M., (2000), On controlling indoor thermal and moisture content for an occupied building
Cerny, R. and Toman, J., (1998), Determination of temperature- and moisture-dependent thermal conductivity by solving the inverse problem of heat conduction
Pel, L., (1995), Moisture transport in porous building materials
Galbraith, G. H. and Mclean, R.C, (1993), The determination of vapour and liquid transport coefficients as input to combined heat mass transfer models
Wang, J. K. and Hagentoft, C., (2001), A numerical method for calculating combined heat, air and moisture transport in building envelope components
Harderup, E., (1997), Estimation of risk of high moisture conditions in an external wall
Hill, D., (1996), Analysis of the hygrothermal behaviour of residential high-rise building components
Okland, O., (1998), Convection in highly insulated building structures
Bednar, T., (2000), Influence of the variation of material properties and uncertainties of the material data model on the results of moisture performance calculations of constructions
Katsman, R. and Becker, R., (2001), A model for moisture-content evolution in porous building elements: treatment of irregular regions
Arfvidsson, J. and J. Claesson, (2000), Isothermal moisture flow in building materials: modelling, measurements and calculations based on Kirchhoff's potentia
Tsongas, G., Burch, D., Roos, C., and Cunningham, M. J., (1995), A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
Hens, H. and J. Carmeliet, (2002), Performance prediction for masonry walls with EIFS using calculation procedures and laboratory testing
K¨¹nzel, H.M, (1995), Simultaneous heat and moisture transport in building components. one- and two-dimensional calculation using simple parameters
Bednar, T., (2002), Approximation of liquid moisture transport coefficient of porous building materials by suction and drying experiments. Demands on determination of drying curve
Haeupl, P. and Xu, Y., (2001), Numerical simulation of freezing and melting in porous materials under the consideration of the coupled heat and moisture transport
Stephenson, D. G., (2003), Thermal diffusion of water vapor through glass fiber insulation
Ozaki, A., (2003), Systematic analysis model on combined heat and water transfer using water potential based on thermodynamics
Fan, J., Cheng, X., Wen, X. and Sun, W., (2003), An improved model of heat and moisture transfer with phase change and mobile condensates in fibrous insulation and comparison with experimental results
Dalgliesh, W. A., Surry, D., (2003), BLWT, CFD and HAM modelling vs. the real world: bridging the gaps with full-scale measurements
Abadie, M. and Mendes, N., (2006), Comparative analysis of response-factor and finite-volume based methods for predicting heat and moisture transfer through porous building materials
Funk, C. and Wakili, K.G., (2007), Driving potentials of heat and mass transport in porous building materials: a comparison between general linear, thermodynamic and micromechanical derivation schemes
Iskra, C. R., (2007), Convective mass transfer between a hydrodynamically developed airflow and liquid water with and without a vapor permeable membrane
Platten, J. K., (2006), The Soret Effect: A Review of Recent Experimental Results
Mendell, M. J., Phd, M., Fisk, W. J., et al., (2002), Improving the Health of Workers in Indoor Environments: Priority Research Needs for a National Occupational Research Agenda
Stout, D. and Mason, M. A., (2002), The distribution of Chlorpyrifos following a crack and crevice type application in the U.S. EPA indoor air quality research house
Gusdorf, and Hamlin, T., (1995), Indoor air quality and ventilation rates in R-2000 houses - final report
Yontz, R. R., (2003), An overview of indoor air quality
Ren, P., Jankun, T. M. and Leaderer, B. P., (1999), Dustborne Alternaria alternata antigens in US homes: results from the National Survey of Lead and Allergens in Housing
Morton, I., (2002), Achieving Healthy Indoor Environments: A Review of Canadian Options
Health , (0), Guidelines on assessment and remediation of fungi in indoor environments
Mendell, M. J., Phd, M., Fisk, W. J., et al., (2002), Improving the Health of Workers in Indoor Environments: Priority Research Needs for a National Occupational Research Agenda
Fisk W. and Rosenfeld A., (1997), Improved productivity and health from better indoor environments
Sippola, M. R. and Nazaroff, W. W., (0), Particle deposition from turbulent flow: review of published research and its applicability to ventilation ducts in commercial buildings
Rappaport, S. M. and Flynn, M., (2003), Commentary: Two Seminal Contributions of S. A. Roach to the Evaluation and Control of Hazardous Substances in Air
Roots, P., (1997), Heat transfer through a well insulated external wooden frame wall- an investigation of the effects of normal defects in the insulation resulting from incident wind and air flow through the wall
Stamou, A., Katsiris, I., (2006), Verification of a CFD model for indoor airflow and heat transfer
Gebremedhin, K. G. and Wub, B. X., (2003), Characterization of flow field in a ventilated space and simulation of heat exchange between cows and their environment
Zhai, Z., (2006), Application of computational fluid dynamics in building design: aspects and trends
Blay, D. and Gautier., B., (1994), Fluid flow through a horizontal aperture between two enclosures at different temperatures
Zhou, L. and Haghighat, F., (2009), Optimization of ventilation system design and operation in office environment
Vera, S., Fazio, P. and Rao, J., (2009), Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test-hut: Part 2- CFD study
Chen, Q., (2009), Ventilation performance prediction for buildings: A method overview and recent applications
Wang, L. and Wong, N. H., (2009), Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for b
Gayo, E., Palomo, A. and Macias, A., (1993), Infrared thermography as a tool for studying the movement of water through some building materials. Part 1. Capillary moisture
Derome, D. and Fazio, P., (1998), Large scale testing of two flat roof assemblies insulated with cellulose
Rode, C., (1998), Organic insulation materials: effect on indoor humidity and necessity of a vapor barrier
Rose, W. B. and McCaa, D. J., (1998), Temperature and moisture performance of wall assemblies with fiberglass and cellulose insulation
Hagentoft, C. E. and Harderup, E., (1996), Moisture conditions in a north-facing wall with cellulos loose-fill insulation: construction with and without a vapor retarder and air leakage
Kunzel, H. M., (1998), Effect of interior and exterior insulation on the hygrothermal behaviour of exposed walls
Budaiwi, I., Abdou, A. and Al-homoud, M., (2002), Variations of thermal conductivity of insulation materials under different operating temperatures: impact on envelope-induced cooling load
Rasmussen, T.V., Fluent Inc, (2003), Verification of density predicted for prevention of settling of loose-fill cellulose insulation in walls
Stephenson, D. G., (2003), Thermal diffusion of water vapor through glass fiber insulation
Al-homoud, M. S., (2004), The effectiveness of thermal insulation in different types of buildings in hot climates
Fan, J., Cheng, X., Wen, X. and Sun, W., (2003), An improved model of heat and moisture transfer with phase change and mobile condensates in fibrous insulation and comparison with experimental results
Araki, K., Kamotob, D. and Matsuokac, S., (2009), Optimization about multilayer laminated film and getter device materials of vacuum insulation panel for using at high temperature
Bednar, T., (2002), Approximation of liquid moisture transport coefficient of porous building materials by suction and drying experiments. Demands on determination of drying curve
Duchaine, C., Grimard, Y. and Cormier, Y., (2000), Influence of building maintenance, environmental factors, and seasons on airborne contaminants of swine confinement buildings.
JIS , (2002), A 1470-1, Test method of adsorption/desorption efficiency for building material to regulate indoor humidity-Part 1: Response Method of Humidity
Stewart, R.B., Jacobsen, R.T. and Becker, J. H., (1996), Formulations for thermodynamic properties of moist air at low pressures as used for construction of new ASHRAE SI unit psychrometric charts
Ins. , (1998), Air permeance of building materials
Qiu, X., Haghighat, F. and Kumaran, K., (2003), Modeling moisture accumulation in multi-layered building materials, MODELING MOISTURE IN RESIDENTIAL BUILDINGS WITH A MULTIZONE IAQ PROGRAM
Hansen, K.K., (1986), Sorption isotherms - a catalogues
Vafai, K. and Tien, H. C., (1989), A numerical investigation of phase change effects in porous materials
Hilfer, R., (1996), Transport and relaxation phenomena in porous media
W?linder, M., (2000), Wetting phenomena on wood- factors influencing measurements of wood wettability
Adan, O. and Brocken, H., (2004), Determination of liquid water transfer properties of porous building materials and development of numerical assessment methods: introduction to the ec hamstad project
Worch, A., (2004), The behaviour of vapour transfer on building material surfaces: the vapour transfer resistance
Kumaran, M. K., (2005), A thermal and moisture transport property data base for common building and insulating materials (final report)
Grunewald, J., H?upl, P., Bomberg, M., (2003), Towards an engineering model of material characteristics for input to ham transport simulations - Part 1: an approach
Carmeliet, J., Roels, S., (2001), Determination of the isothermal moisture transport properties of porous building materials
Abdou, A. A., Budaiwi , I. M., (2005), Comparison of thermal conductivity measurements of building insulation materials under various operating temperatures
Tsubouchi, K. K., (1990), Water vapor pressure in the still air layer adhering to perforated plastic plates
Fu, G., Liu, C., Chen, S. and Hong, J., (2004), Investigating the conversion coefficients for free water surface evaporation of different evaporation pans
De Vries, D. A., (1987), The theory of heat and moisture transfer in porous media revisited
Bednar, T., (2000), Influence of the variation of material properties and uncertainties of the material data model on the results of moisture performance calculations of constructions
Holm, A., (2001), Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
Holm, A.H. and Kuenzel, H.M, (2002), Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
BIPM et al. , (2008), JCGM 101:2008 -- Evaluation of measurement data -- Supplement 1 to the Guide to the expression of uncertainty in measurement -- Propagation of distributions using a Monte Carlo method
BIPM et al. , (1995), Guide to the expression of uncertainty in measurement (GUM), second ed.
Nielsen, A., (1995), Use of statistics for prediction of risk for condensation in a wall construction cold walls radiation technique: the case of quality of air
TIA, (1992), Crystall Ball for Windows, users manual
Rudbeck, C., (1999), Methods for designing building envelope components prepared for repair and maintenance
Okland, O., (1998), Convection in highly insulated building structures
Holm, A.H. and Kuenzel, H.M, (2002), Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
Chang, W. J. and C. I. Weng, (1997), An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture
Sim?es, Branco, B. and A. Tadeu, (2002), Definition of two-dimensional condensation via BEM, using the Glaser method approach
Shipworth, D., (2001), A stochastic framework for embodied greenhouse gas emissions modelling of construction materials
Okland, O., (1998), Convection in highly insulated building structures
Holm, A., (2001), Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
Hens, H., (2000), Fungal defacement in buildings: a performance related approach
Holm, A.H. and Kuenzel, H.M, (2002), Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
IEA , (1990), Annex XIV: Condensation and Energy. Volume 2: Guidelines & Practice and Volume 3: Catalog of Material Properties
Tsongas, G., Burch, D., Roos, C., and Cunningham, M. J., (1995), A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
ASTM , (1998), D4444-92e1 standard test methods for use and calibration of hand-held moisture meters
Lawton, M. D., (1998), Convective processes in loose-fill attic insulation--metering equipment
ASTM , (1995), F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
IRC , (1996), Review of non-destructive test methods for assessing strength, serviceability and deterioration in buildings
Cunningham, M. J., (2001), Inferring ventilation and moisture release rates from field psychrometric data only using system identification techniques
Haghighat, F., Lee, C. and Ghaly, W. S., (2002), Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
Szponar, B. and Larsson, L., (2000), Determination of microbial colonisation in water-damaged buildings using chemical marker analysis by gas chromatography-mass spectrometry
Sunessona, A., Nilssona, C. and Anderssona, B., (1995), Evaluation of adsorbents for sampling and quantitative analysis of microbial volatiles using thermal desorption-gas chromatography
ASTM, (2005), E74-04 standard practice of calibration of force-measuring instruments for verifying the force indication of testing machines
Melikov, A. and Popiolek, Z., (2004), Comparison of different methods for the determination of dynamic characteristics of low velocity thermal anemometers
Tsai, W., Chen, H. and Liao, T., (2005), An ultrasonic air temperature measurement system with self-correction function for humidity
Szponar, B. and Larsson, L., (2000), Determination of microbial colonisation in water-damaged buildings using chemical marker analysis by gas chromatography-mass spectrometry
Gao, P., Korley, F., Martin, J. and Chen, B., (2002), Determination of unique microbial volatile organic compounds produced by five Aspergillus species commonly found in problem buildings
Larsson, L., (1994), Determination of microbial chemical markers by gas chromatography-mass spectrometry - potential for diagnosis and studies on metabolism in situ
Nielsen, K. F. and Madsenc, J.?., (2000), Determination of ergosterol on mouldy building materials using isotope dilution and gas chromatography--tandem mass spectrometry
Namiesnik, J., Gorlo, D., Wolska, L. and Zygmunt, B., (1999), On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
Healy, W. M. and van Doom, E., (2004), A preliminary investigation on the use of ultra-wideband radar for moisture detection in building envelopes
ISO , (2000), ISO 12570: Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature
Pike, L., (1996), Review of correlations of infrared detection techniques for water vapor transmission rates (WVTR) with ASTM e 96-80 and some approaches to gravimetric calibration
ASTM , (1995), F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM , (1999), F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
Klemm, A. J., Klemm, P., Rozniakowski, K. and Galbraith, G., (2002), Non-contact methods of measuring moisture concentration in external layers of building partitions. I--The influence of geometrical microstructure on the kinetics of moisture condensation on glass surfaces
ASTM, (2002), G84-89(1999)e1 standard practice for measurement of time-of-wetness on surfaces exposed to wetting conditions as in atmospheric corrosion testing
Klemm, A. J., Klemm, P., Rozniakowski, K. and Galbraith, G., (2002), Non-contact methods of measuring moisture concentration in external layers of building partitions. I--The influence of geometrical microstructure on the kinetics of moisture condensation on glass surfaces
Sobue, N., (2000), Measurement of moisture gradient in wood by Electrode Scanning Moisture Analysis ESMA
Gu, H., (1997), Moisture Gradient Measurement During Kiln Drying of Red Oak
Fors¨¦n H., Tarvainen V., (2000), Accuracy and functionality of hand held wood moisture content meters
Brischke, C., Rapp, A.O. and Baye, R., (2008), Measurement system for long-term recording of wood moisture content with internal conductively glued electrodes
Lundgren, N. L. C., Hagman, O. and Johansson, J., (2006), Predicting moisture content and density distribution of Scots pine by microwave scanning of sawn timber II: evaluation of models generated on a pixel level
Caia, J., Liub, B. and Su, Q., (2001), Comparison of simultaneous distillation extraction and solid phase microextraction for the determination of volatile flavour components
Fiedler, K., Schutz, E. and Geh, S., (2001), Detection of microbial volatile organic compounds (MVOCs) produced by moulds on various materials
Tranthim-fryer, D. J., Hansson, R. C. and Norman, K. W., (2001), Headspace/solid-phase microextraction/gas chromatography-mass spectrometry: a screening technique for the recovery and identification of volatile organic compounds (VOC's) in postmortem blood and viscera samples
Namiesnik, J., Gorlo, D., Wolska, L. and Zygmunt, B., (1999), On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
Jia, M. Y., Koziel, J. and Pawliszyn, J., (2000), Fast field sampling/sample preparation and quantification of volatile organic compounds in indoor air by solid-phase microextraction and portable gas chromatography
Chai, M. and Pawliszyn, J., (1995), Analysis of environmental air samples by solid-phase microextraction and gas-chromatography ion-trap mass-spectrometry
Cerny, R. and Toman, J., (1998), Determination of temperature- and moisture-dependent thermal conductivity by solving the inverse problem of heat conduction
Krus, M. and Vik, T.A, (1999), Determination of hygric material properties and calculation of the moisture balance of wooden prisms
Davies, M. G., (1995), Solutions to Fourier's equation and unsteady heat flow through structures
ASTM , (2001), C1046-95, Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM , (2001), C1155-95, Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
Eeig, P., (1995), In-situ measurement of the thermal resistance and thermal transmittance
Pike, L., (1996), Review of correlations of infrared detection techniques for water vapor transmission rates (WVTR) with ASTM e 96-80 and some approaches to gravimetric calibration
ASTM , (1993), E96-93 Standard test methods for water-vapor transmission of materials
Krus, M. and Holm A., (0), Simple methods to approximate the liquid transport coefficients describing the absorption and drying
S?derstr?m, O., (1999), On analysis of cup method measurements on hygroscopic materials with surface coatings
Alvarez, J. C., (1998), Evaluation of moisture diffusion theories in porous materials
ASTM , (1995), F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
Gayo, E., Palomo, A. and Macias, A., (1993), Infrared thermography as a tool for studying the movement of water through some building materials. Part 1. Capillary moisture
Osanyintola, O. F. and Simonson, C. J., (2006), Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact
Schijndel, A. W. M. v., (2008), Estimating values for the moisture source load and buffering capacities from indoor climate measurements
Hameury S., (2005), The buffering effect of heavy timber constructions on the indoor moisture dynamic
Hameury, S., (2005), Moisture buffering capacity of heavy timber structures directly exposed to an indoor climate: a numerical study
Hameury, S., (2006), The hygrothermal inertia of massive timber constructions
Svennberg K, (2006), Moisture buffering in the indoor environment
Woloszyn, M. and Rode, C., (2008), eds. Annex 41 Final Report, Volume 1: Modelling Principles and Common Exercises
Abadie, M.O. and Mendon?a, K.C., (2009), Moisture performance of building materials: From material characterization to building simulation using the Moisture Buffer Value
NAHB , (2001), Moisture moisture protection protection of wood of wood sheathing
Bomberg, M. and Onysko, D. M., (2002), Heat, air and moisture control in walls of Canadian houses: a review of the historic basis for current practices
Hazlen, D. G. and Morris, P. I., (2002), Evaluation of vapour diffusion ports on drying of wood-frame walls under controlled conditions
Al-Kalamchi, A., (1984), Analytical and experimental study of the effects of the oil on the heat transfer coefficient of condensing refrigerant vapour at the external surface of plain horizontal tubes
Rousseau, M., (1999), An Overview of the Survey of Building Envelope Failures in the Coastal Climate of British Columbia, Performed by Morrisson-Hershfield Limited for CMHC (1996)
Howell, J., (2008), The rising damp myth (paperback)
Tsongas, G., Burch, D., Roos, C., and Cunningham, M. J., (1995), A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
Gornes, J. A., (1995), The appearance of moulds in buildings
Gustavson, M., (2000), Look to interior for source of moisture that causes rot
ICC , (2000), ICC performance code for buildings and facilities
Inc , (2000), Wall moisture problems in Alberta dwellings
Tadeu, A., Sim?es, N. and Branco, F., (2003), Steady-state moisture diffusion in curved walls, in the absence of condensate flow, via the BEM: a practical Civil Engineering approach (Glaser method)
ASHRAE , (1997), Moisture transfer in porous materials exposed to combined humidity and temperature gradients
Gayo, E., Palomo, A. and Macias, A., (1993), Infrared thermography as a tool for studying the movement of water through some building materials. Part 1. Capillary moisture
Schmidt-doehl, F. and Rostasy, F. S., (1999), Model for the calculation of combined chemical reactions and transport processes and its application to the corrosion of mineral-building materials: Part I. Simulation model
Marquardt, H. and Mainka, G. W., (2001), High-performance wood-based panels substitute breathable membranes on external wall sheathings
Limited , (1998), Survey of building envelope failures in the coastal climate of British Columbia
Center , (1999), Wood used in new residential construction 1998 and 1995
Quarles, S. L., (2001), How durable is structural sheathing?
Salonvaara, M. H. and A. N. Karagiozis, (1998), EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
Hazlen, D. G. and Morris, P. I., (2002), Evaluation of vapour diffusion ports on drying of wood-frame walls under controlled conditions
UNEP , (2002), Status of ratification/accession/acceptance/approval of the agreements on the protection of the stratospheric ozone layer
Shevlin, J., (1996), Successes and ongoing challenges - the international policy response to ozone depletion and its implications for health
UNEP , (2000), The Montreal Protocol on Substances that Deplete the Ozone Layer as adjusted and/or amended in in London 1990, Copenhagen 1992, Vienna 1995, Montreal 1997, Beijing 1999
Maref, W., (2002), Summary of Research Contributions Related to Moisture Management of Exterior Wall System (MEWS)-- Modeling, Experiments and Benchmarking
Maref, W., Lacasse, M. A. and Booth, D. G., (2002), Executive Summary of Research Contributions Related to Moisture Management of Exterior Wall Systems (MEWS) - Modeling, Experiments, and Benchmarking
Burch, D.M, (1991), Indoor ventilation requirements for manufactured housing
Marshall, R. D., (1994), Manufactured homes - probability of failure and the need for better windstorm protection through improved anchoring systems
Tsongas, G. and Olson, J., (1995), Tri State homes: a case study of extensive decay in the walls of older manufactured homes with exterior vapor retarder
Chow, T. T., (2010), A review on photovoltaic/thermal hybrid solar technology
Baetens, R., Jelle, B. P. and Gustavsen, A., (2010), Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: A state-of-the-art review
Chehab, O., (1994), The intelligent facade photovoltaic and architecture
Sun, L. L. and Yang, H. X., (2010), Impacts of the shading-type building-integrated photovoltaic claddings on electricity generation and cooling load component through shaded windows
Han, J., Lu, L. and Yang, H., (2009), Thermal behavior of a novel type see-through glazing system with integrated PV cells
Group , (1996), The Zero-Cavity and DPV Wall Project
Chen, Y., Athienitis, A. K. and Galal, K., (2010), Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept
Chen, Y., Galal, K., Athienitis, A. K. and Modeling,, (2010), design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 2, ventilated concrete slab
Chow, T. T., (2010), A review on photovoltaic/thermal hybrid solar technology
Corbin, C. D. and Zhai, Z. J., (2010), Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic¨Cthermal col
Dessel, S. V. and Foubert, B., (2010), Active thermal insulators: Finite elements modeling and parametric study of thermoelectric modules integrated into a double pane glazing system
Eiffert, P., (2003), Guidelines for the Economic Evaluation of Building-Integrated Photovoltaic Power Systems
Fossa, M., Menezo, C. and Leonardi, E., (2008), Experimental natural convection on vertical surfaces for building integrated photovoltaic (BIPV) applications
Karagiozis, A., (2002), Building enclosure hygrothermal performance study phase I
Karava, P., Jubayer, C. M. and Savory, E., (2011), Numerical modelling of forced convective heat transfer from the inclined windward roof of an isolated low-rise building with application to photovoltaic/thermal systems
Gornes, J. A., (1995), The appearance of moulds in buildings
Blocken, B. and Carmelie, J., (1999), Spatial and temporal distribution of driving rain on buildings: numerical simulation and experimental verification
Snape, P. and B. Atkinson, (1999), Mapping rainfall distribution characteristics on facades using surface deposit geometry
Choi, E. C. C., (1992), Simulation of wind-driven-rain around a building
Matsumoto, M., (1995), Transient heat and moisture transfer through building envelope under rain precipitation
Lawton, M. D., (1999), Reacting to durability problems with Vancouver buildings
Remmele, T. E., (1996), EIFS Resistance to Water Penetration and Evaluation in Accordance with EIMA Method
Rousseau, J., (1983), Rain penetration and moisture damage in residential construction
Kontopidis, T., (1992), Control of rain penetration through pressurized cavity walls
ASTM , (2000), E547-00: water penetration of exterior windows, curtain walls, and doors by cyclic static air pressure differential
ASTM , (2000), E331-00, Standard test method for water penetration of exterior windows, curtain walls, and doors by uniform static air pressure difference
Carll, C., (2000), Rainwater intrusion in light-frame building walls
ASTM, (2000), E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM, (2001), E2128-01a Standard Guide for Evaluating Water Leakage of Building Walls
Choi, E. C. C., (1998), Criteria for water penetration testing
Center and Inc. , (2002), Water intrusion evaluation for caulkless siding, window, and door systems-laboratory testing results
Gurevich, M. S., (2005), Water penetration through exterior walls
Sahal, N. and Lacasse, M. A., (2008), Proposed method for calculating water penetration test parameters of wall assemblies as applied to Istanbul, Turkey
CMHC , (1997), Testing rainscreen wall and window systems: the cavity excitation method
Skerlj, P.S. and D. Surry, (1994), A study of mean pressure gradients, mean cavity pressures, and resulting residual mean pressures across a rainscreen for a representative building
Limited , (1990), A study of the rainscreen concept applied to cladding systems on wood frame walls
Beasley, K.J, (1990), Leaking brick-clad walls: causes, prevention, and repair
Lawton, M., Meklin, T., (1999), Rain penetration control - applying current knowledge (rpc-00)
Makepeace, C. B., (1999), Wrap it up: building houses with the skin on the outside
Inculet, D., Surry, D. and Davenport, A.G, (2001), An experimental study of pressure gradients and their implications for the design of pressure-moderated rainscreens
Seaden, G., (1997), The future of national construction research organizations--scenarios for the changing roles, functions, research agendas and funding
NRC , (2000), The partnership for advancing technology in housing: year 2000 progress assessment of the PATH Program
LeVan, S. L., (1998), Benefits from wood engineering research
Maref, W., (2002), Summary of Research Contributions Related to Moisture Management of Exterior Wall System (MEWS)-- Modeling, Experiments and Benchmarking
Seaden, G., (1997), The future of national construction research organizations--scenarios for the changing roles, functions, research agendas and funding
Andr¨¦, P., (2000), Overview of simulation research in Belgium and Luxembourg
Maref, W., (2002), Summary of Research Contributions Related to Moisture Management of Exterior Wall System (MEWS)-- Modeling, Experiments and Benchmarking
EPA , (2002), A brief guide to mold, moisture, and your home
ICC , (2000), ICC performance code for buildings and facilities
Rousseau, M. Z., (2002), Moisture management: prediction of response of exterior wall elements to climates
Bishop, A. P., (1995), Working towards an understanding of digital library use
Council , (1997), Developing a digital national library for undergraduate science, mathematics, engineering and technology education: report of a workshop
ASTM , (2002), E1557-02 standard classification for building elements and related sitework-UNIFORMAT II
Salonvaara, M. H. and A. N. Karagiozis, (1998), EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
Hens, H., (2000), Fungal defacement in buildings: a performance related approach
S?derstr?m, O., (1999), On analysis of cup method measurements on hygroscopic materials with surface coatings
Holm, A.H. and Kuenzel, H.M, (2002), Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
Kunzel, H. M., (2000), Moisture risk assessment of roof constructions by computer simulation in comparison to the standard Glaser-method
Holm, A. and Kuenzel, H. M., (2001), Uncertainty approaches for hygrothermal building simulations - drying of an AAC flat roof in different climates
Holm, A., (2001), Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
Holm, A.H. and Kuenzel, H.M, (2002), Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
Derome, D., (2000), Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope
Ojanen, T., (2001), Thermal and moisture performance of a sealed cold-roof system with a vapor-permeable underlay
Maref, W., (2002), Summary of Research Contributions Related to Moisture Management of Exterior Wall System (MEWS)-- Modeling, Experiments and Benchmarking
ASTM , (1996), E632-82(1996) standard practice for developing accelerated tests to aid prediction of the service life of building components and materials
Rudbeck, C., (2001), Assessing the service life of building envelope constructions service life of building envelopes
Editorial , (2002), Current state and future issues of building and environmental performance simulation a the start of the 3rd millennium
Kusuda, T., (1999), Early history and future prospects of building system simulation
Clarke, J.A., (1985), Energy simulation in building design
Clarke, J. A., Hensen, J. and Janak, M., (1998), Integrated building simulation: state-of-the-art, Introducing Building Energy Simulation Classes on the Web
Andr¨¦, P., (2000), Overview of simulation research in Belgium and Luxembourg
Augenbroe, G., (2002), Trends in building simulation
Kelly, N.J., (1998), Towards a design environment for buildingintegrated energy systems: the integration of electrical power flow modelling with building simulation
Clarke, J.A., (2002), Performance Prediction Tools for Low Impact Building Design
Blocken, B. and Carmelie, J., (1999), Spatial and temporal distribution of driving rain on buildings: numerical simulation and experimental verification
Straube, J., (2001), Pressure moderation and rain penetration control
Salonvaara, M. H. and A. N. Karagiozis, (1998), EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
Padfield, T., (1998), The role of absorbent materials in moderating changes of relative humidity
Toas, M., (1996), Results of the 1985 Round-Robin Test Series Using ASTM E 96-80
AAMA , (1994), 501.1: Standard test method for metal curtain walls for water penetration using dynamic pressure
BSI, (1992), Code of practice for assessing the exposure of walls to wind-driven rain
Bowman, D.A. and Thorsell, S.R, (2001), Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
ASHRAE , (2002), ANSI/ASHRAE Standard 140-2001, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
NFRC , (2010), NFRC 400-2010[E0A0] Procedure for Determining Fenestration Product Air Leakage
NFRC , (2010), NFRC 300-2010 Test Method for Determining the Solar Optical Properties of Glazing Materials and Systems
NFRC , (2010), NFRC 200-2010[E0A0] Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence
ASTM , (1989), C236-89, Standard test method for steady-state thermal performance of building assemblies by means of a guarded hot box
ASTM , (1991), C518-91, Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the heat flow meter apparatus
ASTM , (1990), C755-85 Standard practice for selection of vapor retarders for thermal insulation
ASTM , (2003), E779-03, ASTM Method for Determining Air Leakage Rates by Fan Pressurization Test
ASTM , (2000), D4933-99 Standard guide for moisture conditioning of wood and wood-base materials
ASTM , (1974), Heat transmission measurements in thermal insulations
ASTM , (1986), D1413-76 Standard method of testing wood preservatives by laboratory soil block culture
ASTM , (1993), E96-93 Standard test methods for water-vapor transmission of materials
ASTM , (1997), D4442-92(1997)e1 standard test methods for direct moisture content measurement of wood and wood-base materials
ASTM , (1998), E1258-88 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM , (2000), E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM , (1996), C976-90(1996)e1 standard test method for thermal performance of building assemblies by means of a calibrated hot box
ASTM , (2000), E331-00, Standard test method for water penetration of exterior windows, curtain walls, and doors by uniform static air pressure difference
ASTM , (1997), C1060-90(1997)e1 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
ASTM , (1999), E917-99 standard practice for measuring life-cycle costs of buildings and building systems
ASTM , (1999), F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
ASTM , (2001), E631-93a(1998)e1 Standard Terminology of Building Constructions
ASTM , (2002), E330-02 standard test method for structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference
ASTM , (2000), E1424-91, Standard test method for determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure and temperature differences across the specimen
ASTM , (2004), E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM , (2001), C168-01 Standard Terminology Relating to Thermal Insulating Materials
ASTM , (2000), C1193-00 Standard Guide for Use of Joint Sealants
ASTM , (2000), E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
ASTM , (2000), E1677-95(2000) standard specification for an air retarder (AR) material or system for low-rise framed building walls
ASTM , (2001), C1498-01 standard test method for hygroscopic sorption isotherms of building materials
ASTM , (2001), C1134-90(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
ASTM , (1995), E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
ASTM , (1995), F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM , (1998), C209-98 standard test methods for cellulosic fiber insulating board
ASTM , (1998), E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM , (1996), E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM , (1998), E1186-98 Standard practices for air leakage site detection in building envelopes and air retarder systems
ASTM , (2000), E2099-00, standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems
ASTM , (1996), E1825-96, standard guide for evaluation of exterior building wall materials, products, and systems
ASTM , (1999), E1700-95(1999), standard classification for serviceability of an office facility for structure and building envelope
ASTM , (2001), C1155-95, Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
ASTM , (2001), C1046-95, Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
BSR/ASTM, (2000), Z8311Z-200x, test method for water penetration of exterior windows, skylights, and doors by rapid pulsed air pressure difference
ASTM , (2002), E964-93(1998)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
ASTM , (2002), E1557-02 standard classification for building elements and related sitework-UNIFORMAT II
ASTM , (2002), D3679-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM , (2000), C1199-00 standard test method for measuring the steady-state thermal transmittance of fenestration systems using hot box methods
ASTM , (2000), E547-00: water penetration of exterior windows, curtain walls, and doors by cyclic static air pressure differential
ASTM , (2002), E783-02 standard test method for field measurement of air leakage through installed exterior windows and doors
ASTM , (2004), E283-04, standard test method for rate of air leakage through exterior windows, curtain walls and doors
ASTM , (1998), D4444-92e1 standard test methods for use and calibration of hand-held moisture meters
ASTM , (1985), C177-85 Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus
ASTM , (2001), E779-99 Standard test method for determining air leakage rate by fan pressurization
ASTM , (1997), C1363-97 standard test method for the thermal performance of building assemblies by means of a hot box apparatus
ASTM , (2000), C1199-00 standard test method for measuring the steady-state thermal transmittance of fenestration systems using hot box methods
ASTM , (2000), D3273-00 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM , (1996), E632-82(1996) standard practice for developing accelerated tests to aid prediction of the service life of building components and materials
ASTM, (2002), D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
ASTM, (2000), Standard guide for statistical evaluation of indoor air quality models. ASTM D 5157-97
ASTM, (2002), G84-89(1999)e1 standard practice for measurement of time-of-wetness on surfaces exposed to wetting conditions as in atmospheric corrosion testing
ASTM, (2000), E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM, (2000), E1825-96 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
ASTM, (2000), E1827-96(2002) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM, (2000), E2099-00 standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems
ASTM, (2000), D3274-95 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
ASTM, (2001), E2128-01a Standard Guide for Evaluating Water Leakage of Building Walls
Charette, R. P. and Marshall, H. E., (1999), UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Cost Analysis
ASTM, (2004), E29-04 standard practice for using significant digits in test data to determine conformance with specifications
ASTM, (2005), E74-04 standard practice of calibration of force-measuring instruments for verifying the force indication of testing machines
ASTM , (2001), E773-01, Standard test method for accelerated weathering of sealed insulating glass units
BSR/ASTM, (2000), Z8311Z-200x, test method for water penetration of exterior windows, skylights, and doors by rapid pulsed air pressure difference
DIN , (0), DIN 4108-7, Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance
Nordtest, (1993), Building materials and components in the vertical position: exposure to accelerated climatic strains
BSI, (2001), BS EN 12865:2001 Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure
BSI, (1997), 97/108355 DC, Hydrothermal performance of buildings under pulsating air pressure
Olesen, B.W. and Parsons, K.C, (2002), Introduction to thermal comfort standards and to the proposed new version of EN ISO 7730
ISO , (2000), ISO 12570: Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature
ASTM , (2002), E330-02 standard test method for structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference
Center and Inc , (2001), Review of structural materials and methods for home building in the United States: 1900-2000
Morse-Fortier, L. J., (1995), Structural implications of increased panel use in wood-frame buildings
Reneckis, D., Lafave, J. M., (2005), Analysis of brick veneer walls on wood frame construction subjected to out-of-plane loads
Hutcheon, N.B, (1963), Requirements for Exterior Walls
Carroll, M., (2001), Wall sheathing creates headaches for builder, homeowners
ASTM , (1998), E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
Drysdale, R. G. and Michael J., (1997), Full scale tests of brick veneer steel stud walls - strength and rain penetration
Builders , (2000), Residential Structural Design Guide: 2000 Edition, A State--of--the--Art Reviiew and Application of Engineering Information for Light--Frame Homes, Aparttmentts, and Townhouses
Lowe, R., (2001), A review of recent and current initiatives on climate change and its impact on the built environment: impact, effectiveness and recommendations final report
Haghighat, F., Lee, C. and Ghaly, W. S., (2002), Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
Bomberg, M. and Onysko, D. M., (2002), Heat, air and moisture control in walls of Canadian houses: a review of the historic basis for current practices
Wadso, L., (1996), Studies of the degratation of building materials by isothermal microcalorimetry
Bruntland, G. (ed.), (1987), Our common future: The World Commission on Environment and Development
Siy, E., L. Koziol and D. Rollins, (2001), The state of the states: assessing the capacity of states to achieve sustainable development through green planning
CICA, (2000), Industry as a partner for sustainable development: construction
Roodman, D.M. and N. Lenssen, (1995), A building revolution: how ecology and health concerns are transforming construction
Fundations , (2002), Principle of sustanable construction
Li, H. and Shen, Q., (2002), Supporting the decision-making process for sustainable housing
Osmani, M. and O'reilly, A., (2009), Feasibility of zero carbon homes in England by 2016: A house builder's perspective
Malmqvist, T. and Glaumann, M., (2009), Environmental efficiency in residential buildings - A simplified communication approach
Hofman, K. and Li, X., (2009), Canada's energy perspectives and policies for sustainable development
Alwaer, H. and Clements-croome, D. J., (2010), Key performance indicators (KPIs) and priority setting in using the multi-attribute approach for assessing sustainable intelligent buildings
Clarke, J. A., Hensen, J. and Janak, M., (1998), Integrated building simulation: state-of-the-art, Introducing Building Energy Simulation Classes on the Web
Center and Inc , (2003), Commercialization of Innovation: Lessons Learned
Toole, T. M., (1998), Uncertainty and home builders' adoption of technological innovations
Bossink, B. A. G., (2004), Managing Drivers of Innovation in Construction Networks
ASTM , (1974), Heat transmission measurements in thermal insulations
ASTM , (1996), C976-90(1996)e1 standard test method for thermal performance of building assemblies by means of a calibrated hot box
ASTM , (1991), C518-91, Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the heat flow meter apparatus
ASTM , (1989), C236-89, Standard test method for steady-state thermal performance of building assemblies by means of a guarded hot box
ASHRAE , (1999), Standard 90.2, Energy Efficient Design of New Low-Rise Residential Buildings
Anderlind, G., (1997), High accuracy heat flow calculation - a method to calculate the heat flow for an arbitrary wall with constant material properties in a natural climate
Loomans, M., (1998), The measurement and simulation of indoor air flow
Mcwilliams, J., (2002), Review of airflow measurement techniques
Sherman, M. H., (0), Air Infiltration Measurement Techniques
Simonson, C. J., Salonvaara, M., Ojanen, T., (2004), Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part I -- field measurements
Roulet, and Compagnon, R., (1989), Multizone tracer gas infiltration measurements--Interpretation algorithms for non-isothermal cases
Hagentoft, C. E. and Harderup, E., (1996), Moisture conditions in a north-facing wall with cellulos loose-fill insulation: construction with and without a vapor retarder and air leakage
Rode, P. C., (1990), Transient calculation of moisture migration using a simplified description of hysteresis in the sorption isotherms
Tsongas, G. and Olson, J., (1995), Tri State homes: a case study of extensive decay in the walls of older manufactured homes with exterior vapor retarder
Hjort, S. G., (1998), A qualitative model for moisture balance in painted vertical wood paneling
Kurnitski, J., (2000), Humidity control in outdoor-air-ventilated crawl spaces in cold climate by means of ventilation, ground covers and dehumidification
TenWolde, A., (1994), Ventilation, humidity, and condensation in manufactured houses during winter
Sepp?nen, O. and Fisk, W. J., (2002), Association of ventilation system type with SBS symptoms in office workers
ASTM , (2001), Performance of exterior envelopes of whole buildings VIII: integration of building envelopes
Karagiozis, A., (2002), Building enclosure hygrothermal performance study phase I
Rand, T. G., (2001), An assessment of mold contamination problems in Atlantic Canada schools: mold burdens, amplifying sites and benefits of proactive school inspection policies
Gan, G., (2006), Simulation of buoyancy-induced flow in open cavities for natural ventilation
Gebremedhin, K. G. and Wub, B. X., (2003), Characterization of flow field in a ventilated space and simulation of heat exchange between cows and their environment
Wanga, L. and Chen, Q., (2008), Evaluation of some assumptions used in multizone airflow network models
Vera, S., Fazio, P. and Rao, J., (2010), Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study
Hagentoft, C. E. and Harderup, E., (1996), Moisture conditions in a north-facing wall with cellulos loose-fill insulation: construction with and without a vapor retarder and air leakage
Stewart, W. E., (1998), Effect of air pressure differential on vapor flow through sample building walls
Gulay, G.W., C.D. Stewart, G.J. Foley, (1993), Field investigation survey of airtightness, air movement and indoor air quality in high-rise apartment buildings: summary report
Leblanc, R., (1991), Airtightness tests on components used to join different or similar materials of the building envelope
Limited and Inc , (1991), Development of design procedures and guidelines for reducing electric demand by air leakage control in high-rise residential buildings: final report
Canada , (1998), Establishing the protocol for measuring air leakage and air flow patterns in high-rise apartment buildings
Fazio, P., H. Ge, and J. Rao, (2001), Measuring air leakage of full-scale curtain wall sections using a non-rigid air-chamber method
ASTM , (1998), E1258-88 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM , (2000), E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM , (2003), E779-03, ASTM Method for Determining Air Leakage Rates by Fan Pressurization Test
ASTM , (2000), E1424-91, Standard test method for determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure and temperature differences across the specimen
ASTM , (1996), E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM , (1998), E1186-98 Standard practices for air leakage site detection in building envelopes and air retarder systems
Quirouette, R., (1999), On-site exterior wall monitoring methods for air leakage, condensation and rain penetration control problems
Limited , (1996), Commissioning and Monitoring the Building Envelope for Air Leakage
Reardon. J. T., Kim A. K., and Shaw, C. Y., (1900), Balanced fan depressurization method for measuring component and overall air leakage in single-and multifamily dwellings
Shaw, C. Y., (1980), Methods for conducting small scale pressurization tests and air leakage data of multi storey apartment buildings
CGSB , (1999), 149.15-96-CAN/CGSB, Determination of the Overall Envelope Airtightness of Buildings by the Fan Pressurization Method Using the Building's Air Handling Systems
DIN , (0), DIN 4108-7, Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance
Boyer, H. et al, (1999), Building ventilation : a pressure airflow model computer generation and elements of validation
Proskiw, G. and Parekh, A., (2001), A proposed test procedure for separating exterior envelope air leakage from interior partition air leakage
Feustel, H. E., (1999), COMIS-an international multizone -air-flow and contaminant transport model
Burch, D.M, (1991), Indoor ventilation requirements for manufactured housing
Chen, H., Besant, R. W., and Tao, Y., (1997), Two-dimensional air exfiltration and heat transfer through fiberglass insulation I -- numerical model and experimental facility
ASTM , (2004), E283-04, standard test method for rate of air leakage through exterior windows, curtain walls and doors
ASTM , (2000), E1677-95(2000) standard specification for an air retarder (AR) material or system for low-rise framed building walls
Sandberg, M. and Stymne, H., (1985), A quantitative estimate of the accuracy of tracer gas methods for the determination of the ventilation flow rate in buildings
Haghighat, F., Lee, C. and Ghaly, W. S., (2002), Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
Baumann, M. G. D., (1997), Volatile organic chemical emissions from composite wood products: a review
Haghighat, F., Lee, C. and Ghaly, W. S., (2002), Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
Haghighat, F., Lee, C. and Ghaly, W. S., (2002), Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
Pjetraj, M., (1996), VOC Emissions: Influence of VOC Measurement and Reporting Methods on Regulatory Policy and Emissions Estimations
Yang, X., Chen, Q., Zeng, J. and Zhang, J. S., (2001), A Mass transfer model for simulating volatile organic compound emissions from 'wet' coating materials applied to absorptive substrates
Tranthim-fryer, D. J., Hansson, R. C. and Norman, K. W., (2001), Headspace/solid-phase microextraction/gas chromatography-mass spectrometry: a screening technique for the recovery and identification of volatile organic compounds (VOC's) in postmortem blood and viscera samples
Caia, J., Liub, B. and Su, Q., (2001), Comparison of simultaneous distillation extraction and solid phase microextraction for the determination of volatile flavour components
ASTM , (2000), E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
ASTM , (1995), E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
AAMA , (1994), 501.1: Standard test method for metal curtain walls for water penetration using dynamic pressure
Hutcheon, N.B, (1963), Requirements for Exterior Walls
Eriksson B. and Westberg, K., (1999), Model to transform measured climatic data from a local level to a micro level: temperatures model to transform climatic data
Cornick, S.M, (2001), Climate loads and their effect on building envelopes - an overview
Holm, A. and Kuenzel, H. M., (2001), Uncertainty approaches for hygrothermal building simulations - drying of an AAC flat roof in different climates
Holm, A., (2001), Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
Djebbar et al. , (2001), Environmental boundary conditions for long-term hygrothermal calculations
Djebbar et al. , (2001), Environmental boundary conditions for long-term hygrothermal calculations
Beausoleil-morrison, I., (2000), The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation
Simonson, C. J., Salonvaara, M., Ojanen, T., (2004), Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part II --verification and numerical studies
Padfield, T., (1999), Humidity buffering of interior spaces by porous,absorbent insulation, part of hygrothermal properties of alternative insulation materials
Tsongas, G., Burch, D., Roos, C., and Cunningham, M. J., (1995), A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
Cunningham, M. J., Roos, C., Gu, L. and Spolek, G., (2004), Predicting psychrometric conditions in biocontaminant microenvironments with a microclimate heat and moisture transfer model - description and field comparison
van Mook, F., (1999), Measurements and simulations of driving rain on the main building of the TUE
Choi, E. C. C., (2001), Wind-driven rain and driving rain coefficient during thunderstorms and non-thunderstorms
Blocken, B. and Carmelie, J., (1999), Spatial and temporal distribution of driving rain on buildings: numerical simulation and experimental verification
Snape, P. and B. Atkinson, (1999), Mapping rainfall distribution characteristics on facades using surface deposit geometry
Zhu, D., Mallidi, S.R. and Fazio, P., (1995), Approach for urban driving rain index by using climatological data recorded at suburban meteorological station
Choi, E. C. C., (2000), Variation of wind-driven rain intensity with building orientation
Choi, E. C. C., (1999), Wind-driven rain on building faces and the driving-rain index
Choi, E. C. C., (1992), Simulation of wind-driven-rain around a building
Inculet, D., Surry, D. and Davenport, A.G, (2001), An experimental study of pressure gradients and their implications for the design of pressure-moderated rainscreens
Salles, C. and Poesen, J., (1999), Performance of an optical spectro pluviometer in measuring basic rain erosivity characteristics
Adl-Zarrabi, B. and A. H?gberg, (2002), Determination and validation of the microclimate load: Driving rain and solar radiation
Underwood, S.J. and Meentemeyer, V., (1998), Physical geography, climatology of wind-driven rain for the contiguous United States for the period 1971 to 1995
BSI, (2001), BS EN 12865:2001 Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure
Carll, C., (2000), Rainwater intrusion in light-frame building walls
ASTM, (2000), E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
Blocken, B., (2004), Quantification of driving rain as a boundary condition for water flow modelling in building parts
van Mook, F., (2002), Driving rain on building envelopes
van Mook, F., (1999), Full-scale measurements and numeric simulation of driving rain on a building fasade
Blocken, B. and Carmeliet, J., (2000), Driving rain on building envelopes II: representative experimental data for driving rain estimation
Blocken, B. and Carmelie, J., (1999), Spatial and temporal distribution of driving rain on buildings: numerical simulation and experimental verification
Choi, E. C. C., (1999), Wind-driven rain on building faces and the driving-rain index
Choi, E. C. C., (2000), Variation of wind-driven rain intensity with building orientation
Choi, E. C. C., (2001), Wind-driven rain and driving rain coefficient during thunderstorms and non-thunderstorms
Choi, E. C. C., (1992), Simulation of wind-driven-rain around a building
Inculet, D. and D. Surry, (1995), Simulation of wind-driven rain and wetting patterns on buildings
van Mook, F., (1999), Measurements and simulations of driving rain on the main building of the TUE
ASTM , (2000), E547-00: water penetration of exterior windows, curtain walls, and doors by cyclic static air pressure differential
ASTM , (2000), E1424-91, Standard test method for determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure and temperature differences across the specimen
ASTM , (2002), E330-02 standard test method for structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference
ASTM , (2000), E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
NFRC , (2010), NFRC 400-2010[E0A0] Procedure for Determining Fenestration Product Air Leakage
NFRC , (2010), NFRC 300-2010 Test Method for Determining the Solar Optical Properties of Glazing Materials and Systems
NFRC , (2010), NFRC 200-2010[E0A0] Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence
Myers, J. H., (1984), Aluminum and vinyl siding on historic buildings, the appropriateness of substitute materials for resurfacing historic wood frame buildings
ASTM , (2000), D4933-99 Standard guide for moisture conditioning of wood and wood-base materials
Carll, C. G. and Highley, T. L., (1999), Decay of wood and wood-based products above ground in buildings, Mechanism of Brown-Rot Decay: Paradigm or Paradox
Wang, Q. and Odeen, K., (1996), Evaluation of natural decay resistance of wood recovered from demolished buildings
Allen, C., (1999), Wood material behavior in severe environments
Howard, J. L., (2001), U.S. timber production, trade consumption, and price statistics 1965 to 1999
Smulski, S., (1996), Wood-destroying fungi in residential construction
Pasanen, P.O. et al, (2001), Fungal growth on wood surfaces at different moisture conditions in crawl spaces
Stehn, L., (2002), Environmental labelling of timber-framed dwellings and their building components
Nortdtest, (0), NT Build 420, Building Materials, Wood: Moisture Content
Crawford, D.M. and Clausen, C.A, (1999), Evaluation of wood treated with copper-based preservatives for Cu loss during exposure to heat and copper-tolerant Bacillus licheniformis
Hameury, S., (2006), The hygrothermal inertia of massive timber constructions
Hoffmeyer, P. (Ed), (1997), Proceedings of International Conference on Wood-Water Relations : Annual Conference of COST Action E
Schajer, G. S. and Orhan, F., (2006), Measurement of wood grain angle, moisture content and density using microwaves (Messung der Faserneigung, der Holzfeuchte und der Rohdichte mittels Mikrowellen)
Simpson, W. T., Liu, J. Y., (1997), An optimization technique to determine red oak surface and internal moisture transfer coefficients during drying
W?linder, M., (2000), Wetting phenomena on wood- factors influencing measurements of wood wettability
Allen, C., (1999), Wood material behavior in severe environments
Baumann, M. G. D., (1997), Volatile organic chemical emissions from composite wood products: a review
Damery, D. T. and Fisette, P., (2001), Decision making in the purchase of siding: a survey of architects, contractors, and homeowners in the U.S. Northeast
Bowman, D.A. and Thorsell, S.R, (2001), Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
Karagiozis, A., (2002), Building enclosure hygrothermal performance study phase I