Conceptual Reference Database for Building Envelope Research

Reference List by Author | Reference List by Concept | Concept Tree | Concept List by Reference | What's New

1. Aadmi, M., Karkri, M. and Hammouti, M., (2014), , Heat transfer characteristics of thermal energy storage of a composite phase change materials: Numerical and experimental invest

2. AAMA, (1998), , Voluntary test method for thermal transmittance and condensation resistance of windows, doors and glazed wall sections
   condensation and evaporation, experiments and testing, windows, doors, fenestration,

3. AAMA, (1994), , 501.1: Standard test method for metal curtain walls for water penetration using dynamic pressure
   curtain wall, standards, water penetration,

4. Abadie, M. and Mendes, N., (2006), , Comparative analysis of response-factor and finite-volume based methods for predicting heat and moisture transfer through porous building materials
   HAM: theory and modelling,

5. Abadie, M. O., Finlayson, E. U. and Gadgil, A. J., (2002), , Infiltration heat recovery in building walls: computational fluid dynamics investigations results
   double facades, envelope design,

6. Abadie, M.O. and Mendon?a, K.C., (2009), , Moisture performance of building materials: From material characterization to building simulation using the Moisture Buffer Value
   Moisture buffering,

7. Abadie, M.O., Limam, K., (2007), , Numerical evaluation of the particle pollutant homogeneity and mixing time in a ventilated room
   particle transport, penetration of particulate, through walls,

8. Abahri, K., Belarbi, R. and Trabelsi, A., (2011), , Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials

9. Abbott, S. P., (2002), , Mycotoxins and Indoor Molds
   fungi: components and products,

10. Abdel-ghany, A. M. and Al-helal, I. M., (2014), , Methods for determining the temperature of a plastic net under solar and thermal radiation conditions

11. Abdel-ghany, A. M., Ishigami, Y., Goto, E. and Kozai, T., (2006), , A Method for measuring Greenhouse Cover Temperature using a Thermocouple

12. Abdou, A. A., Budaiwi , I. M., (2005), , Comparison of thermal conductivity measurements of building insulation materials under various operating temperatures
    material properties: hygrothermal,

13. Abdul-nabi, L., (1996), , Modelling of air barrier characteristics in predicting the moisture performance of building envelopes.
    air barrier, HAM: material properties,

14. Abeysekera, J. D. A. and Shahnavaz, H., (1987), , Ergonomics of technology transfer

15. Abuku, M., Janssen, H., Poesenc J. and Roels, S., (2009), , Impact, absorption and evaporation of raindrops on building facades
    rain on walls, rain precipitation,

16. Adams, S., (2002), , Identification and treatment of toxic molds
    fungi and molds in buildings and their envelopes, fungi: assessment, sampling and analysis,

17. Adan, O. and Brocken, H., (2004), , Determination of liquid water transfer properties of porous building materials and development of numerical assessment methods: introduction to the ec hamstad project
    material properties: hygrothermal,

18. Adan, O. C. G., (1995), , Response of fungi to transient relative humidities
    fungi and molds in buildings and their envelopes, fungi: growth and growth model,

19. Adhikari, A., Sen, M. M., Gupta-bhattachary, S. and Chanda, S., (1999), , Studies on airborne fungal spores from two indoor cowsheds of suburban and rural areas of West Bengal, India
    fungi: spore, aerosol,

20. Adhikari, A., Sen, M. M., Gupta-bhattacharya, S. and Chanda, S., (2004), , Airborne viable, non-viable, and allergenic fungi in a rural agricultural area of India: a 2-year study at five outdoor sampling stations
    fungi: spore, aerosol,

21. Adl-Zarrabi, B. and A. H?gberg, (2002), , Determination and validation of the microclimate load: Driving rain and solar radiation
    load on building envelope, solar energy, radiation, weather data and issues, wind driven rain,

22. Adl-Zarrabi, B. and H?gberg, A. B., (2001), , Microclimate: field measurements, driving rain analyses
    rain on walls, rain precipitation, wind driven rain,

23. Affordable Housing Research and Technology, (2002), , Research and Development Needs for Structural Performance of Light-frame Residential Construction - Workshop Report
    building codes and standards, market, trend, future, performance-based building codes and standards, research, funding,

24. Afram, A. and Janabi-sharifi, F., (2013), , Theory and Applications of HVAC Control Systems ¨C A Review of Model Predictive Control (MPC)

25. Agarwal, K. N. and Verma, V. V., (1977), , Thermal characteristics of glazing and shading materials

26. Aggelides, S. M. and Londra, P. A., (1998), , Comparison of empirical equations for temperature correction of gypsum sensors
    measurement: moisture content,

27. Agrawal , P. C., (1989), , A review of passive systems for natural heating and cooling of buildings
    building subsystems: HVAC,

28. Agrawal, B. and Tiwari, G.N., (2011), , Building Integrated Photovoltaic Thermal Systems: For Sustainable Developments
    BIPV,

29. Ahmad, A. R. and Ahmad, I.A., (2004), , A bandwidth selection for kernel density estimation of functions of random variables
    simulation of building process,

30. Ahmad, M., Bontemps, A., Sall¨¦e, H., Quenard, D., (2006), , Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase c
    insulation,

31. Ahman, M., Lundin, A., Musabasic, V., Soderman, E., (2000), , Improved health after intervention in a school with moisture problems
    building: commercial, office, fungi: health effects, IAQ: sick building syndrome, SBS, moisture damages and problems for buildings,

32. Ahmet, K. and Jazayeri, S., (1996), , Standarization of conductance-type timber moisture meters
    measurement: moisture content,

33. Ahola, P., J?ms?, S., Viitanen, H. and Viitaniemi, P., (2002), , Mould and blue stain on heat treated wood
    fungi: molds in buildings, wood, lumber, timber,

34. Ahzahar, N., Karim, N. A., Hassan, S. H. and Eman, J., (2011), , A study of contribution factors to building failures and defects in construction industry
    building: damage and failures,

35. AIHA, (2001), , Report of microbial growth task force
    fungi: growth and growth model,

36. Air Ins., (1998), , Air permeance of building materials
    buoyancy air flow, material properties: hygrothermal,

37. Airaksinen, M., (2003), , Moisture and fungal spore transport in outdoor air-ventilated crawl spaces in a cold climate
    particle transport, penetration of particulate, through walls,

38. Airaksinen, M., Kurnitski, J., Pasanen, P. and Sepp?nen, O., (2004), , Fungal spore transport through a building structure
    particle transport, penetration of particulate, through walls,

39. Airaksinen, M., Pasanen, P., Kurnitski, J. and Sepp?nen, O., (2004), , Microbial contamination of indoor air due to leakages from crawl space- a field study
    particle transport, penetration of particulate, through walls,

40. Air-Ins inc, (1997), , Water flow by means of capillary action
    capillary break, capillary theory, rainscreen, pressure equalized rainscreen principle, wood frame houses and walls, wood structure,

41. Aizenberg, V., Grinshpun, S.A, Willeke, K., Smith, J. and Baron, P.A, (2000), , Performance characteristics of the button personal inhalable aerosol sampler
    fungi: assessment, sampling and analysis,

42. Aizenberg, V., Reponen, T., Grinshpun, S.A. and Willeke, K., (2000), , Performance of Air-O-Cell, Burkard, and Button samplers for total enumeration of airborne spores
    fungi: assessment, sampling and analysis,

43. Akbari, H. and S. J. Konopacki, (1998), , The impact of reflectivity and emissivity of roofs on building cooling and heating energy use
    energy, roof,

44. Akyildiz, I. F., Su, W., Sankarasubramaniam, Y. and Cayirci, E., (2002), , Wireless sensor networks: a survey
    measurement: wireless sensor network,

45. Alam, M. and Singh, H., (2011), , Vacuum Insulation Panels (VIPs) for building construction industry - A review of the contemporary developments and future direc

46. Albatici, R. and Tonelli, A. M., (2010), , Infrared thermovision technique for the assessment of thermal transmittance value of opaque building elements on site

47. Albatici, R., Passerini, F., Tonelli, A. M. and Gialanella, S., (2013), , Assessment of the thermal emissivity value of building materials using an infrared thermovision technique emissometer

48. Alcorn, J.A. and Haslam, P.J, (1996), , The embodied energy of a standard house - then and now
    embodied energy,

49. Aldrich, R., Arena, L. and Zoeller, B., (2010), , Practical Residential Wall Systems: R-30 and beyond

50. Alexopoulos, C., C. Mims, and M. Blackwell, (1996), , Introductory mycology
    fungi and molds in buildings and their envelopes,

51. Alfawakhiri, F., (2002), , Buildings: structures - day of reckoning
    building: highrise,

52. Al-homoud, M. S., (2004), , The effectiveness of thermal insulation in different types of buildings in hot climates
    insulation, weather, climates,

53. Al-homoud, M. S., (2005), , Performance characteristics and practical applications of common building thermal insulation materials
    insulation,

54. Ali, H. H. and Nsairat, S. F., (2009), , Developing a green building assessment tool for developing countries - Case of Jordan
    green building, sustainable building,

55. Al-Kalamchi, A., (1984), , Analytical and experimental study of the effects of the oil on the heat transfer coefficient of condensing refrigerant vapour at the external surface of plain horizontal tubes
    Fazio's student: thesis, moisture damages and problems for buildings,

56. Allen, C., (1999), , Wood material behavior in severe environments
    wood panel, wood, lumber, timber, wood: engineered products,

57. Allen, E., (2005), , How Buildings Work, Third Edition
    building,

58. Allen, E. and Iano, O., (2003), , Fundamentals of Building Construction: Materials and Methods, 4ed.
    building, construction industry,

59. Almeida, P., Carvalho, M. J., Amorim, R., Mendes, J. F. and Lopes, V., (2014), , Dynamic testing of systems ?Use of TRNSYS as an approach for parameter identification

60. Alrubaih, M. S., Zain, M. F. M., Alghoul, M. A., Ibrahim, N. L. N., Shameri, M. A. and Elayeb, O., (2013), , Research and development on aspects of daylighting fundamentals

61. Alturkistani, A., (2007), , Large scale experimental investigation of the relative drying capacity of building envelope panels of various configurations
    experiment: hygrothermal -- large scale laboratory testing,

62. Alturkistani, A., Fazio, P., Rao, J. and Mao, Q., (2008), , A new test method to determine the relative drying capacity of building envelope panels of various configurations
    experiment: hygrothermal -- large scale laboratory testing,

63. Alvarez, J. C., (1998), , Evaluation of moisture diffusion theories in porous materials
    measurement: vapor diffusion properties, WVT, OSB - Oriented strandboard,

64. Alwaer, H. and Clements-croome, D. J., (2010), , Key performance indicators (KPIs) and priority setting in using the multi-attribute approach for assessing sustainable intelligent buildings
    sustainability, environment,

65. Ambrosini, W., Forgione, N., Manfredini, A. and Oriolo, F., (2006), , On various forms of the heat and mass transfer analogy: Discussion and application to condensation experiments
    HAM: theory and modelling,

66. American Academy of Pediatrics, (1998), , Toxic Effects of Indoor Molds (RE9736)
    fungi: components and products, fungi: health effects,

67. American Forest & Paper Association, (1995), , Wood Frame Construction Manual for One- and Two-Family Dwellings - SBC High Wind Edition
    wood frame houses and walls, wood structure,

68. Amissah, P, (2005), , Indoor air quality - combining air humidity with construction moisture
    humidity on building performance,

69. Ammann, H. M., (0), , Is indoor mold contamination a threat to health?
    fungi: health effects,

70. Ammann, H. M., (2001), , IAQ and human toxicosis: empirical evidence and theory
    fungi: components and products, fungi: health effects,

71. Anagnost, S. E., (2007), , Wood in the built environment - conditions for mold and decay
    fungi: growth and growth model,

72. Anderlind, G., (1997), , High accuracy heat flow calculation - a method to calculate the heat flow for an arbitrary wall with constant material properties in a natural climate
    economical requirement of building envelope, experiment: field testing and monitoring programs, thermal analysis and performance,

73. Andersen, B. and Nissen, A. T., (2000), , Evaluation of media for detection of Stachybotrys and Chaetomium species associated with water-damaged buildings
    fungi: assessment, sampling and analysis, fungi: Stachybotrys,

74. Anderson, L. O. and G. E. Sherwood, (1974), , Condensation problems in your house: prevention and solution
    condensation and evaporation, wood frame houses and walls, wood structure,

75. Anderson, M., Anderson, P., (2007), , Prefab Prototypes: Site-Specific Design for Offsite Construction
    prefabricate buildings, manufactured housing,

76. Andersson, M. A., M. Nikulin, U. Ko Ljalg, M. C. Andersson, F. Rainey, K. Reijula, E.-L. Hintikka, And M. Salkinoja-Salonen, (1997), , Bacteria, molds, and toxins in water-damaged building materials
    bacteria, biodeterioration, fungi and molds in buildings and their envelopes, fungi: MVOC - microbial volatile organic compound,

77. Andr¨¦, P., (2000), , Overview of simulation research in Belgium and Luxembourg
    building: simulation of building processes, Resource: institutes, organization, associations, simulation of building process,

78. Angelo, W. J., (2002), , Mold problem is slow growing
    fungi: legal, law, litigation, insurance issues, fungi: molds in buildings,

79. Anis, W., (2006), , Air Barrier Systems in Buildings
    air barrier,

80. Anon, (2001), , Danish Research Program on "Moulds in buildings" 1998-2001
    fungi and molds in buildings and their envelopes,

81. Anon, (2002), , Healthy indoors - achieving healthy indoor environments in canada, Healthy Buildings, Healthy People: A Vision for the 21st Century
    IAQ - indoor air quality, IAQ: Health,

82. Anon, (1990), , Atlantic Canada wood framing moisture survey
    wood frame houses and walls, wood structure,

83. Anon, (1999), , Bugs, Mold & Rot III Conference
    fungi and molds in buildings and their envelopes, fungi: molds in buildings,

84. Anon, (2003), , Respiratory recommendations from EPA's mold remediation guidelines
    fungi: health effects, guideline,

85. Anon, (2000), , Building science 101: air barriers
    air barrier,

86. Anon, (2001), , Diagnosing wall moisture
    moisture in buildings,

87. Anon, (2000), , How builders and homeowners can identify and limit fungal contamination in new homes
    building: condo / condominium, fungi: molds in buildings,

88. Anon , (2000), , Mold growth and IAQ woes at three-year-old school spark lawsuits by school district, students, and staff in Texas towns
    fungi: health effects, fungi: legal, law, litigation, insurance issues, fungi: molds in buildings, IAQ - indoor air quality, moisture in buildings,

89. Anon, (2000), , Mould, moisture and mildew in attics: prevention and cure healthier homes, energy savings and new business
    attic, crawl space, ceiling,, fungi: molds in buildings,

90. ANSI, (1997), , American National Standard for Expressing Uncertainty--U.S. Guide to the Expression of Uncertainty in Measurement
    mathematics: error analysis, uncertainty analysis,

91. ANSI/ASHRAE, (2011), , Standard 140-2011 -- Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (ANSI Approved) ASHRAE / 2011 / 272 pages

92. Apte, J. and Arasteh, D., (2008), , Window-related energy consumption in the US residential and commercial building stock
    energy: calculation,

93. Apte, J., Arasteh, D. and Huang, Y.J., (2003), , Future advanced windows for zero-energy homes
    Zero Energy Building: ZEB,

94. Araki, K., Kamotob, D. and Matsuokac, S., (2009), , Optimization about multilayer laminated film and getter device materials of vacuum insulation panel for using at high temperature
    insulation,

95. Arasteh, D., Goudey, H. and Kohler, C., (2008), , Highly insulating glazing systems using non-structural center glazing layers
    windows, doors, fenestration,

96. Arasteh, D., Huang, J., Mitchell, R., Clear, R. and Kohler, C., (2000), , A database of window annual energy use in typical North American residences
    windows, doors, fenestration,

97. Arasteh, D., Selkowitz, S., Apte, J. and Lafrance., M., (2006), , Zero energy windows
    Zero Energy Building: ZEB,

98. Archer, J. W. and J. Gallagher, (2001), , Objectively speaking
    building codes and standards, objective-based codes, performance-based building codes and standards,

99. Arfvidsson, J., (1998), , Moisture transport in porous media. modelling based on Kirchhoff potentials
    HAM: theory and modelling,

100. Arfvidsson, J., (1999), , A new algorithm to calculate the isothermal moisture penetration for periodically varying relative humidity at the boundary
     Isotherm,

101. Arfvidsson, J. and Claesson, J., (1991), , PC-based method to calculate moisture transport
     HAM: application,

102. Arfvidsson, J. and J. Claesson, (2000), , Isothermal moisture flow in building materials: modelling, measurements and calculations based on Kirchhoff's potentia
     HAM: theory and modelling,

103. Argiriou, A., Lykoudis, S., Kontoyiannidis, S., Balaras, C. A., Asimakopoulos, D., Petrakis, M. and Kassomenos, P., (1999), , Comparison of methodologies for TMY generation using 20 years data for Athens, Greece
     weather data and issues,

104. Arlani, A., (1986), , Optimum Building Design: Decision Making
     Fazio's student: thesis,

105. Armstrong, S. and Hurley, W. G., (2010), , A new methodology to optimise solar energy extraction under cloudy conditions

106. Armstrong, S.. and Liaw, J., (2002), , The fundamentals of fungi
     fungi and molds in buildings and their envelopes,

107. Aroso, M., H., (1995), , Moisture condensation in thermal bridges. Establishing design criteria
     condensation and evaporation, thermal bridge,

108. ASCE, (1982), , Evaluation, Maintenance and Upgrading of Wood Structures
     maintenance, inspection, and diagnose, wood frame houses and walls, wood structure,

109. ASCE, (2000), , Guideline for condition assessment of the building envelope
     envelope performance,

110. ASCE and IBHS, (2001), , The ten most wanted - a search for solutions to reduce recurring losses from natural hazards
     weather, climates,

111. ASHAE, (2006), , ASHRAE green guide: the design, construction, and operation of sustainable buildings
     green building, sustainable building, guideline, Standards: ASHRAE,

112. ASHRAE, (2001), , Standard 90.1: Energy efficient design of new buildings except low-rise residential buildings
     building: condo / condominium, building: residential, house, home, Standards: ASHRAE,

113. ASHRAE, (1989), , Thermal performance of the exterior envelopes of buildings IV
     envelope,

114. ASHRAE, (2001), , WYEC2 Software
     weather data and issues, weather, climates,

115. ASHRAE, (1997), , Moisture transfer in porous materials exposed to combined humidity and temperature gradients
     coupled heat and moisture calculations, moisture transport in porous materials,

116. ASHRAE, (2001), , Position documents: indoor air quality
     IAQ - indoor air quality,

117. ASHRAE, (2001), , Characterization of framing factors for low-rise residential building walls
     building: residential, house, home, surveys, reviews, statistics,

118. ASHRAE, (1997), , ASHRAE Handbook-Fundamentals
     fungi: molds in buildings, vapor barrier, vapor retarder,

119. ASHRAE, (1999), , ASHRAE 52.2, method of testing general ventilation air-cleaning devices used for removal effciency
     fungi: remediation, treatment, prevention, ventilation: standards,

120. ASHRAE, (2002), , ANSI/ASHRAE Standard 140-2001, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
     building: simulation of building processes, energy, standards,

121. ASHRAE, (2001), , Modeling two and three-dimensional heat transfer through composite wall and roof assemblies in hourly simulation programs
     energy, energy: calculation, simulation: heat transfer, thermal, Standards: ASHRAE,

122. ASHRAE, (2001), , BSR/ASHRAE Standard 55-1992R, thermal environmental conditions for human occupancy, first public review draft
     building subsystems: HVAC, standards discussion, Standards: ASHRAE, thermal comfort,

123. ASHRAE, (1999), , Standard 90.2, Energy Efficient Design of New Low-Rise Residential Buildings
     building: condo / condominium, building: residential, house, home, Standards: ASHRAE, thermal analysis and performance,

124. ASHRAE, (2002), , Standard 62.2P, Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
     building: condo / condominium, building: residential, house, home, IAQ - indoor air quality, ventilation: standards,

125. ASHRAE, (2000), , Recommended practices for controlling moisture in crawl spaces
     attic, crawl space, ceiling,, moisture control, moisture management,

126. ASHRAE, (2008), , Advanced Energy Design Guides
     energy, guideline,

127. ASHRAE, (2003), , Standard 62.2, Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
     ventilation: airtightness, air leakage,, ventilation: standards,

128. Ashrae, , (2004), , Thermal environmental conditions for human occupancy, ASHRAE Standard 55-2004
     thermal comfort,

129. Asiz, A., Smith, I. and Menendez, V., (2008), , Air leakage and moisture deposition of prefabricated light-frame wood building
     prefabricate buildings, manufactured housing,

130. Assefa, G., Glaumann, M., Malmqvist, T., Kindembe, B., Hult, M., Myhr, U. and Eriksson, O., (2007), , Environmental assessment of building properties--Where natural and social sciences meet: The case of EcoEffect

131. Assouline-Dayan, Y., Leong, A., Shoenfeld, Y. and Gershwin, M.E, (2002), , Studies of sick building syndrome. IV. Mycotoxicosis
     fungi: components and products - mycotoxin, fungi: health effects,

132. ASTM, (2004), , E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings
     moisture damages and problems for buildings, rain penetration, water intrusion, standards: ASTM,

133. ASTM, (2002), , E964-93(1998)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
     life cycle assessment (LCA), standards: ASTM,

134. ASTM, (2000), , C1193-00 Standard Guide for Use of Joint Sealants
     sealant, sealant, standards: ASTM,

135. ASTM, (2002), , E1557-02 standard classification for building elements and related sitework-UNIFORMAT II
     risk analysis, standards: ASTM,

136. ASTM, (1995), , F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
     measurement and instrumentation, measurement: Infrared, measurement: vapor diffusion properties, WVT, standards: ASTM,

137. ASTM, (2002), , D6329-98 standard guide for developing methodology for evaluating the ability of indoor materials to support microbial growth using static environmental chambers
     fungi and molds in buildings and their envelopes, fungi: assessment, sampling and analysis, fungi: damage to buildings, fungi: growth and growth model, fungi: molds in buildings, fungi: MVOC - microbial volatile organic compound, fungi: mycology studies, culturing, fungi: spore, aerosol, standards: ASTM,

138. ASTM, (2001), , Performance of exterior envelopes of whole buildings VIII: integration of building envelopes
     envelope, ventilation - Air Infiltration and Ventilation in Buildings, WRB weather-resistive barrier, house wrap,

139. ASTM, (1996), , E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
     standards: ASTM, tracer gas method for measuring air exchange, ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

140. ASTM, (2003), , E779-03, ASTM Method for Determining Air Leakage Rates by Fan Pressurization Test
     standards: ASTM, ventilation: airtightness, air leakage,,

141. ASTM, (1998), , E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
     sheathing, standards: ASTM, structure aspect, strength and rigidity of building envelope,

142. ASTM, (1998), , C209-98 standard test methods for cellulosic fiber insulating board
     insulation, standards: ASTM,

143. ASTM, (2002), , D3679-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
     cladding, siding, veneer, envelope materials, standards: ASTM,

144. ASTM, (2000), , E1677-95(2000) standard specification for an air retarder (AR) material or system for low-rise framed building walls
     air barrier, standards: ASTM, ventilation: infiltration of buildings, wind induced pressure on building, wood frame houses and walls, wood structure,

145. ASTM, (2001), , C1498-01 standard test method for hygroscopic sorption isotherms of building materials
     sorption process: mathematical model, standards: ASTM,

146. ASTM, (2001), , C1134-90(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
     insulation, standards: ASTM,

147. ASTM, (1995), , E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
     roof, standards: ASTM, water penetration,

148. ASTM, (1998), , E1186-98 Standard practices for air leakage site detection in building envelopes and air retarder systems
     measurement: Infrared, standards: ASTM, tracer gas method for measuring air exchange, ventilation: airtightness, air leakage,,

149. ASTM, (2001), , C168-01 Standard Terminology Relating to Thermal Insulating Materials
     insulation, standards: ASTM,

150. ASTM, (2000), , D3274-95 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
     fungi: molds in buildings, standards: ASTM,

151. ASTM, (2000), , E2099-00 standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems
     envelope, experiments and testing, standards: ASTM, wind induced pressure on building,

152. ASTM, (2000), , E1827-96(2002) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
     standards: ASTM, tracer gas method for measuring air exchange, ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

153. ASTM, (2000), , E1825-96 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
     envelope, standards: ASTM,

154. ASTM, (2000), , E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
     rain penetration, water intrusion, standards: ASTM, wind driven rain,

155. ASTM, (2000), , E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
     standards: ASTM, tracer gas method for measuring air exchange, ventilation: airtightness, air leakage,,

156. ASTM, (1998), , D4444-92e1 standard test methods for use and calibration of hand-held moisture meters
     measurement and instrumentation, measurement: moisture content, standards: ASTM,

157. ASTM, (1996), , E1825-96, standard guide for evaluation of exterior building wall materials, products, and systems
     standards: ASTM,

158. ASTM, (1999), , E1700-95(1999), standard classification for serviceability of an office facility for structure and building envelope
     building: commercial, office, envelope, standards: ASTM,

159. ASTM, (2001), , C1155-95, Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
     measurement: thermal properties, standards: ASTM,

160. ASTM, (2001), , C1046-95, Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
     measurement: thermal properties, standards: ASTM,

161. ASTM, (1986), , D1413-76 Standard method of testing wood preservatives by laboratory soil block culture
     fungi: preservatives against fungi growth and mold decay, standards: ASTM,

162. ASTM, (1990), , C755-85 Standard practice for selection of vapor retarders for thermal insulation
     standards: ASTM, vapor barrier, vapor retarder,

163. ASTM, (2000), , D4933-99 Standard guide for moisture conditioning of wood and wood-base materials
     moisture in buildings, standards: ASTM, wood, lumber, timber,

164. ASTM, (1997), , D4442-92(1997)e1 standard test methods for direct moisture content measurement of wood and wood-base materials
     measurement: moisture content, standards: ASTM,

165. ASTM, (2000), , E2099-00, standard practice for the specification and evaluation of pre-construction laboratory mockups of exterior wall systems
     experiment: laboratory, standards: ASTM,

166. ASTM, (1999), , E917-99 standard practice for measuring life-cycle costs of buildings and building systems
     life cycle assessment (LCA), life cycle assessment (LCA), standards: ASTM,

167. ASTM, (1999), , F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
     measurement: Infrared, standards: ASTM,

168. ASTM, (2001), , E631-93a(1998)e1 Standard Terminology of Building Constructions
     standards: ASTM,

169. ASTM, (2002), , E330-02 standard test method for structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference
     standards: ASTM, structural load of building envelope, windows, doors, fenestration,

170. ASTM, (2000), , E1424-91, Standard test method for determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure and temperature differences across the specimen
     standards: ASTM, ventilation: airtightness, air leakage,, windows, doors, fenestration,

171. ASTM, (1998), , E1258-88 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
     standards: ASTM, ventilation: airtightness, air leakage,,

172. ASTM, (2001), , E2128-01a Standard Guide for Evaluating Water Leakage of Building Walls
     rain penetration, water intrusion, standards: ASTM,

173. ASTM, (2000), , E331-00, Standard test method for water penetration of exterior windows, curtain walls, and doors by uniform static air pressure difference
     rain penetration, water intrusion, standards: ASTM,

174. ASTM, (2000), , E547-00: water penetration of exterior windows, curtain walls, and doors by cyclic static air pressure differential
     curtain wall, rain penetration, water intrusion, standards: ASTM, windows, doors, fenestration,

175. ASTM, (1993), , E96-93 Standard test methods for water-vapor transmission of materials
     HAM: material properties, measurement: vapor diffusion properties, WVT, standards: ASTM,

176. ASTM, (2002), , E783-02 standard test method for field measurement of air leakage through installed exterior windows and doors
     standards: ASTM, ventilation: airtightness, air leakage,,

177. ASTM, (2001), , E779-99 Standard test method for determining air leakage rate by fan pressurization
     standards: ASTM, tracer gas method for measuring air exchange, ventilation: airtightness, air leakage,,

178. ASTM, (2002), , G84-89(1999)e1 standard practice for measurement of time-of-wetness on surfaces exposed to wetting conditions as in atmospheric corrosion testing
     measurement: moisture content, standards: ASTM,

179. ASTM, (2004), , E283-04, standard test method for rate of air leakage through exterior windows, curtain walls and doors
     standards: ASTM, ventilation: airtightness, air leakage,, ventilation: infiltration of buildings,

180. ASTM, (1997), , C1060-90(1997)e1 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
     Infrared thermography (IRT), insulation, maintenance, inspection, and diagnose, standards: ASTM,

181. ASTM, (1996), , C976-90(1996)e1 standard test method for thermal performance of building assemblies by means of a calibrated hot box
     standards: ASTM, thermal analysis and performance,

182. ASTM, (2000), , C1199-00 standard test method for measuring the steady-state thermal transmittance of fenestration systems using hot box methods
     experiments and testing, standards: ASTM, standards: ASTM, windows, doors, fenestration,

183. ASTM, (1974), , Heat transmission measurements in thermal insulations
     insulation, standards: ASTM, thermal analysis and performance,

184. ASTM, (1985), , C177-85 Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus
     economical requirement of building envelope, standards: ASTM,

185. ASTM, (2000), , Standard guide for statistical evaluation of indoor air quality models. ASTM D 5157-97
     IAQ - indoor air quality, mathematics: statistics, standards: ASTM,

186. ASTM, (2000), , E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
     curtain wall, standards: ASTM, water penetration, windows, doors, fenestration,

187. ASTM, (1997), , C1363-97 standard test method for the thermal performance of building assemblies by means of a hot box apparatus
     experiment: facility on moisture in building envelope, experiments and testing, standards: ASTM,

188. ASTM, (2000), , D3273-00 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
     experiment: mycology study, fungi: molds in buildings, standards: ASTM,

189. ASTM, (1989), , C236-89, Standard test method for steady-state thermal performance of building assemblies by means of a guarded hot box
     standards: ASTM, thermal analysis and performance,

190. ASTM, (1991), , C518-91, Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the heat flow meter apparatus
     standards: ASTM, thermal analysis and performance,

191. ASTM, (1996), , E632-82(1996) standard practice for developing accelerated tests to aid prediction of the service life of building components and materials
     service life prediction, standards: ASTM,

192. ASTM, (2005), , E74-04 standard practice of calibration of force-measuring instruments for verifying the force indication of testing machines
     measurement and instrumentation, standards: ASTM,

193. ASTM, (2003), , ASTM C991-03 Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
     insulation,

194. ASTM, (2001), , E773-01, Standard test method for accelerated weathering of sealed insulating glass units
     standards: ASTM,

195. ASTM, (2006), , E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
     Standards: ASHRAE,

196. ASTM, (2004), , E29-04 standard practice for using significant digits in test data to determine conformance with specifications
     mathematics: error analysis, uncertainty analysis, standards: ASTM,

197. Athienitis, A. K., (1995), , Building simulation in a mathematical programming environment
     building: simulation of building processes, Education, training,

198. Athienitis, A. K. and Ramadan, H., (1999), , Numerical model of a building with transparent insulation

199. Athienitis, A. K. and Tzempelikos, A., (2002), , A methodology for simulation of daylight room illuminance distribution and light dimming for a room with a controlled shading device

200. Athienitis, A. K., Bambara, J., O'neill, B. and Faille, J., (2011), , A prototype photovoltaic/thermal system integrated with transpired collector
     BIPV, PV/T,

201. Athienitis, A. K., Liu, C., Hawes, D., Banu, D. and Feldman, D., (1997), , Investigation of the thermal performance of a passive solar test-room with wall latent heat storage

202. Athienitis, D.B.A.K., (2012), , A Control Algorithm for Optimal Energy Performance of a Solarium/Greenhouse with Combined Interior and Exterior Motorized Shading

203. Atlas of Canada website, (2006), , Solar Radiation Maps
     solar energy, radiation,

204. Atzori, L., Iera, A. and Morabito, G., (2010), , The Internet of Things: A survey

205. Augenbroe, G., (2002), , Trends in building simulation
     building: simulation of building processes, facility management, simulation of building process, surveys, reviews, statistics,

206. Augenbroe, G. and Hensen, J., (2004), , Simulation for better building design
     building: simulation of building processes,

207. Auger, M., (1997), , Measurement of ventilation efficiency for indoor air quality in office buildings using carbon dioxide as a tracer gas
     experiments and testing, tracer gas method for measuring air exchange, ventilation: infiltration of buildings, ventilation: measurement,

208. Auger, M., (1990), , Experimental Comparison of Three Heating Systems with Respect to Heat Distribution and Thermal Comfort
     Fazio's student: thesis,

209. August, J. A. and Joshi, S. P., (1996), , Deflection of rectangular orthotropic plates under uniform load

210. Augusto, F., Koziel, J. and Pawliszyn, J., (2001), , Design and validation of portable SPME devices for rapid field air sampling and diffusion based calibration
     measurement: SPME,

211. Avdelidis, N. P. and Kauppinen, T. K., (2008), , Thermography as a tool for building applications and diagnostics

212. Avdelidis, N. P. and Moropoulou, A., (2003), , Emissivity considerations in buildingnext term thermography

213. AWC, (2001), , WCD 1 - Details for Conventional Wood Frame Construction (formerly the Manual for Wood Frame Construction)
     wood frame houses and walls, wood structure,

214. Axelsson, B., Saraf, A. and Larsson, L., (1995), , Determination of ergosterol in organic dust by gas chromatography-mass spectrometry
     fungi: components and products,

215. Axley J. and Grot R., (1989), , The coupled airflow and thermal analysis problem in building airflow system simulation
     computer codes for energy calculations, coupled energy and airflow calculation, energy and moisture in building,

216. Axley, J., (2007), , Multizone airflow modeling in buildings: history and theory
     ventilation: air flow models, multi zone model,

217. Axley, J. W., (2001), , Surface-drag flow relations for zonal modeling
     ventilation: air flow models, multi zone model,

218. Axley, J. W., (2007), , Embedded detailed analysis integrating CFD with multizone methods of building airflow analysis

219. Ayhan, D. and Saglam, S., (2012), , A technical review of building-mounted wind power systems and a sample simulation model

220. Aylor, D. E., (1999), , Biophysical scaling and the passive dispersal of fungus spores: relationship to integrated pest management strategies
     fungi: aerobiology, dispersion of spores,,

221. Ayoub, J. and Dignard-bailey, L., (2009), , Photovoltaic Technology Status and Prospects - Canadian Annual Report 2008

222. Ayoub, J. and Dignard-bailey, L., (2008), , Photovoltaic Technology Status and Prospects - Canadian Annual Report 2007

223. Ayoub, J., Dignard, L. and Filion, A., (2001), , Photovoltaics for buildings: Opportunities for Canada

224. Azari-n, R. and Kim, Y., (2012), , Comparative assessment of life cycle impacts of curtain wall mullions

225. Azenha, A. V. M., Sousa, H. and Samagaio, A., (2012), , Thermal enhancement of plastering mortars with Phase Change Materials: Experimental and numerical approach

226. Backman, E., Hyv?rinen, M., Lindberg, R., Reiman, M., Seuri, M. and Kokotti, H., (2000), , The effect of air leakage through the moisture damaged structures in a school building having mechanical exhaust ventilation
     moisture damages and problems for buildings, ventilation - Air Infiltration and Ventilation in Buildings, ventilation: airtightness, air leakage,,

227. Badagliacca, A., (2002), , "Bonum": the degree of a universal scale for the comfort metric
     thermal comfort,

228. Badescu, V., Gueymard, C. A., Cheval, S., Oprea, C., Baciu, M., Dumitrescu, A., Iacobescu, F., Milos, I. and Rada, C., (2012), , Computing global and diffuse solar hourly irradiation on clear sky. Review and testing of 54 models

229. Baechler, M. C. and Love, P. M., (2005), , Building America Best Practices Series: Volume 3 ¨C Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Cold and Very Cold Climates

230. Baetens, R., Jelle, B. P. and Gustavsen, A., (2010), , Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: A state-of-the-art review
     PV PV Photovoltaic,

231. Baetens, R., Jelle, B. P. and Gustavsen, A., (2011), , Aerogel insulation for building applications: A state-of-the-art review

232. Baetens, R., Jelle, B. P., Gustavsen, A. and Grynning, S., (2010), , Gas-filled panels for building applications: A state-of-the-art review

233. Baetens, R., Jelle, B.P. and Gustavsen, A., (2010), , Phase change materials for building applications: A state-of-the-art review

234. Baetens, R., Jelle, B.P., Thue, J.V., Tenpierik, M. J., Grynning, S., Uvslokk, S. and Gustavsen, A., (2010), , Vacuum insulation panels for building applications: A review and beyond
     insulation,

235. Bailey, D. W. et al, (1996), , Investigation of dynamic latent heat storage effects of building construction and furnishing
     energy and moisture in building,

236. Bain, N., (1999), , Managing major repairs - a condominium owner's guide
     building: condo / condominium, envelope damage, maintenance, inspection, and diagnose,

237. Baines, M. J., (2001), , Moving finite element, least squares, and finite volume approximations of steady and time-dependent PDEs in multidimensions
     mathematics: numerical method, finite difference, finite element,

238. Baird, G. and Chan, S. A., (1983), , Energy cost of houses and light construction buildings
     embodied energy,

239. Baker, M. C., (1977), , Rain deposit, water migration and dirt marking of buildings
     rain on walls, rain precipitation,

240. Baker, P. H., Bailly, D., Campbell, M., Galbraith, G. H., Mclean, R. C., Poffa, N. and Sanders, C. H., (2006), , The application of X-ray absorption to building moisture transport studies
     HAM: material properties,

241. Balaras, C. A. and Argiriou, A. A., (2002), , Infrared thermography for building diagnostics

242. Balaras, C. A., Gaglia, A. G. and Georgopoulou, E., Mirasgedis, S., Sarafidis, Y. and Lalas, D. P., (2007), , European residential buildings and empirical assessment of the Hellenic building stock, energy consumption, emissions and potential energy savings
     energy: calculation,

243. Baldwin, PEJ and Maynard, A. D., (1998), , A survey of wind speeds in indoor workplaces
     Indoor air movement-CFD,

244. Bales, E. and Rose, W. B., (1994), , Bugs, mold & rot II
     fungi and molds in buildings and their envelopes, fungi: molds in buildings,

245. Ballinger, J. A., Morrison, G. L. and Prassard , D. K., (1991), , Establishment of a solar calorimeter

246. Balocco, C., (2007), , Daily natural heat convection in a historical hall

247. Balocco, C. and Grazzini, G., (2009), , Numerical simulation of ancient natural ventilation systems of historical buildings. A case study in Palermo

248. Banu, D., Feldman, D., Haghighat, F., Paris, J., and Hawes, D., (1998), , Energy-Storing Wallboard: Flammability Tests

249. Barbose, G., Darghouth, N., Wiser, R. and Seel, J., (2011), , Tracking the Sun IV: An Historical Summary of the Installed Cost of Photovoltaics in the United States from 1998 to 2010

250. Bardage, S. L., (2002), , Colonization of painted wood by blue stain fungi
     fungi: molds in buildings, wood, lumber, timber,

251. Bardana, E. J., (2003), , Indoor air quality and health does fungal contamination play a significant role?
     fungi: health effects,

252. Barley, D., (2001), , An overview of residential ventilation activities in the Building America program (phase I)
     housing project, ventilation - Air Infiltration and Ventilation in Buildings, ventilation: standards,

253. Barreneche, C., Navarro, M. E., Fern¨˘ndez, A. I., Cabeza, L. F. and Haghighat-, E.A.F., (2013), , Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale

254. Barreneche, C., Sol¨¦, A., Mir¨®, L., Martorell, I., Fern¨˘ndez, A. I. and Cabeza, L. F., (2013), , Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM)

255. Barrett, D., (1998), , The renewal of trust in residential construction: an inquiry into the quality of condominium construction in British Columbia
     BC leaky condos, building: condo / condominium, building: residential, house, home, country: Canada, Education, training, technology transfer,

256. Barrett, D., (2000), , The renewal of trust in residential construction part II: commission of inquiry into the quality of condominium construction in British Columbia
     BC leaky condos, building: condo / condominium,

257. Barrett, P., (2007), , Revaluing Construction: a holistic model
     construction industry,

258. Barrios, M. and Sciver, S. W. V., (2013), , Thermal conductivity of rigid foam insulations for aerospace vehicles

259. Barry, A. O. and Corneau, D., (1999), , Volatile organic chemicals emissions from OSB as a function of processing parameters
     OSB - Oriented strandboard, VOC, VOC: measurement and identification,

260. Bartak, M., I. Beausoleil-Morrison, J.A. Clarke,J. Denev, F. Drkal, and M. Laina, (2002), , Integrating CFD and building simulation
     building: simulation of building processes,

261. Bartee, E. M., (1968), , Engineering experimental design fundamentals
     mathematics: regression analysis / fitting,

262. Bashahu, M. and Nkundabakura, P., (2007), , Review and tests of methods for the determination of the solar cell junction ideality factors
     PV PV Photovoltaic,

263. Baskaran,A. and T. Stathopoulos, (1994), , Prediction of wind effects on buildings using computational methods - state of the art review
     CFD - computational fluid dynamics, wind induced pressure on building,

264. Bassett, M., Mcneil, S., (2009), , Ventilation Measured in the Wall Cavities of High Moisture Risk Buildings
     experiment: laboratory,

265. Bassett, M., Mcneil, S., Bennett, J., (2009), , Drainage and Evaporation from Window Sill Trays
     experiment: laboratory,

266. Bastani, A., Haghighat, F. and Kozinski, J., (2014), , Designing building envelope with PCM wallboards: Design tool development

267. Bates, D. M. and D. G. Watts, (1988), , Nonlinear regression analysis and its applications
     mathematics: error analysis, uncertainty analysis, mathematics: regression analysis / fitting,

268. Baumann, M. G. D., (1997), , Volatile organic chemical emissions from composite wood products: a review
     VOC, wood: engineered products,

269. Baumann, M. G. D., Batterman, S. A., (1999), , Terpene emissions from particleboard and medium-density fiberboard products
     VOC, VOC: measurement and identification, wood panel,

270. Baumann, M. G. D., Lorenz, L. F., Batterman, S. A. and Zhang, G. Z., (2000), , Aldehyde emissions from particleboard and medium density fiberboard products
     VOC, VOC: measurement and identification, wood panel,

271. Baumert, K. A., Herzog, T. and Pershing, J., (2005), , Navigating the Numbers: Greenhouse Gas Data and International Climate Policy
     climate change, global warming,

272. Baxter, D., Perkins, J., Seltzer, J., Mcghee, C., (2002), , A regional comparison of mold spore concentrations outdoors and inside 'clean' and 'mold contaminated' southern california buildings
     fungi: damage to buildings, fungi: moisture damaged house -- indoor microbial concentrations, fungi: molds in buildings,

273. Bayer, J. A. and Clift, C. D., (1993), , Use of physical property data and testing in the design of curtain wall
     curtain wall,

274. Bazilian, M ., Ijeomaonyejix., Liebreich, M., Macgill, I., Chase, J., Shah, J., Gielen, D., Arent, D. and Landf, D., (2012), , Reconsidering the Economics of Photovoltaic Power
     PV PV Photovoltaic,

275. Bazley, B. I., (2002), , Technology Dissemination: Triggering Innovation Adoption in Canada's Home Construction Industry
     construction industry, country: Canada,

276. BC, (1998), , Improving quality and accountability in residential construction: discussion paper
     building: condo / condominium, building: residential, house, home, envelope damage,

277. BC, (1996), , Condominium Act of British Columbia
     building: condo / condominium, moisture damages and problems for buildings,

278. Beall, C., (1999), , Thermal and moisture protection manual: for architects, engineers, and contractors
     moisture control, moisture management,

279. Beasley, K., (2001), , Contemporary and traditional wall-system failures
     envelope damage, moisture damages and problems for buildings,

280. Beasley, K., (2004), , Laboratory Testing for Building Failure Investigations

281. Beasley, K.J, (1990), , Leaking brick-clad walls: causes, prevention, and repair
     brick, masonry, mortar, cladding, siding, veneer, maintenance, inspection, and diagnose, rain penetration, water intrusion, rainscreen, pressure equalized rainscreen principle,

282. Beasley, R., Keil, U., vonMutius., E., Pearce, N. and et al., (1998), , Worldwide variation in prevalence of symptoms of asthma, allergic rhinoconjunctivitis, and atopic eczema: ISAAC
     fungi: health effects,

283. Beaulieu, P., Bomberg, M. T., Cornick, S. M., Dalgliesh, W. A., Desmarais, G., Djebbar, R., Kumaran, M. K., Lacasse, M. A., et al, (2002), , Report from Task 8 of MEWS Project - MEWS Methodology for Developing Moisture Management Strategies - Application to Stucco Clad Wood-Frame Walls in North America
     envelope design, HAM hygrothermal simulation,

284. Beaulieu, P., Bomberg, M., Cornick, S., Dalgliesh, A., Desmarais, G., Djebbar, R., Kumaran, K., Lacasse, M., Lackey, J. Maref, W., et al., (2002), , Final Report from Task 8 of MEWS Project (T8-03) - Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding Clad Wood-Frame Walls
     experiment: facility on moisture in building envelope, experiment: hygrothermal performance, HAM hygrothermal simulation, HAM: application, HAM: computer models, wind driven rain, WRB weather-resistive barrier, house wrap,

285. Beaulieu, P.; Cornick, S.M.; Dalgliesh, W.A.; Djebbar, R.; Kumaran, M.K.; Lacasse, M.A.; et al., (2001), , MEWS methodology for developing moisture management strategies: application to stucco-clad wood-frame walls in North America
     experiment: facility on moisture in building envelope, experiment: laboratory, moisture control, moisture management, wood frame houses and walls, wood structure,

286. Beauregard, R., (2005), , Innovation and Value Added -The Qu¨¦bec-Canada Experience and some of the Global Trends
     construction industry,

287. Beausoleil-morrison, I., (2002), , The adaptive conflation of computational fluid dynamics with whole-building thermal simulation
     Indoor air movement-CFD, thermal analysis and performance,

288. Beausoleil-morrison, I., (2000), , The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation
     Whole building HAM,

289. Beausoleil-Morrison, I. , Clarke, J.A. , Denev, J. Macdonald, I. A. Melikov, A. , Stankov, P., (2001), , Further developments in the conflation of CFD and building simulation
     CFD - computational fluid dynamics,

290. Beck, C., Grieser, J., Kottek, M., Rubel, F. and Rudolf, B., (2006), , Characterizing Global Climate Change by means of K?ppen Climate Classification
     weather, climates,

291. Beck, J. V. and K. J. Arnold, (1977), , Parameter estimation in engineering and science
     mathematics: error analysis, uncertainty analysis, mathematics: regression analysis / fitting,

292. Becker, R, (2010), , Air leakage of curtain walls -- diagnostics and remediation
     curtain wall,

293. Becker, R., (1999), , Research and development needs for better implementation of the performance concept in building
     performance-based building codes and standards,

294. Becker, R. and Putterman, M., (2002), , Patterned mold growth on rendered facades in Israel - A consequence of substrate thermal insulation
     fungi: molds in buildings,

295. Bednar, T., (2002), , Approximation of liquid moisture transport coefficient of porous building materials by suction and drying experiments. Demands on determination of drying curve
     HAM: theory and modelling, liquid transport, moisture diffusivity,

296. Bednar, T., (2000), , Influence of the variation of material properties and uncertainties of the material data model on the results of moisture performance calculations of constructions
     building: simulation of building processes, HAM: theory and modelling, mathematics: error analysis, uncertainty analysis,

297. Beers, P. E. and Smith, W. D., (1998), , Repair method for common water leaks at operable windows and sliding glass doors
     renovation, repair, maintenance, windows, doors, fenestration,

298. Behjat, B., Paykani, A. and Afkar, A., (2012), , Analysis of deflection of rectangular plates under different loading conditions

299. Behr, R., (1997), , Performance of architectural glass in a mid-rise curtain wall system under simulated earthquake conditions.
     curtain wall,

300. Behr, R. A., (1995), , On-site investigations of spandrel glass microenvironments
     windows, doors, fenestration,

301. Behzadi, S. and Farid, M. M., (2014), , Long term thermal stability of organic PCMs

302. Belarbi, R., Qin, M., Ait-mokhtar, A. and Nilsson, L., (2008), , Experimental and theoretical investigation of non-isothermal transfer in hygroscopic building materials
     HAM: theory and modelling,

303. Belleghem, M. V., Steeman, H., Steeman, M., Janssens, A. and Paepe, M., (2010), , Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling

304. Belleghem, M. V., Steeman, M., Willockx, A., Janssens, A. and Paepe, M., (2011), , Benchmark experiments for moisture transfer modelling in air and porous materials

305. Bellia, L. and Minichiello, F., (2003), , A simple evaluator of building envelope moisture condensation according to an European Standard
     HAM: simplified models - analytical methods,

306. Benemann, J., Chehab, O. and Schaar-gabriel, E., (2001), , Building-integrated PV modules
     BIPV,

307. Benesh, I., (2009), , Remote Wall, A Manual
     envelope,

308. Benge, C., (1999), , Dealing with alternative construction methods through performance based building codes
     objective-based codes, performance-based building codes and standards,

309. Bennett, D. H., Koutrakisa, P., (2005), , Determining the infiltration of outdoor particles in the indoor environment using a dynamic model
     particle transport, penetration of particulate, through walls,

310. Bentz, D. P., Garboczi, E. J. and Martys, N. S., (1996), , Application of digital-image-based models to microstructure, transport properties, and degradation of cement-based materials
     envelope materials, experiment: laboratory, measurement and instrumentation,

311. Benyon, F. H. L., Jones, A. S., Tovey, E. R. and Stone, G., (1999), , Differentiation of allergenic fungal spores by image analysis, with application to aerobiological counts
     fungi: assessment, sampling and analysis,

312. BERC, (2010), , Whole-Wall R-Value Explained

313. Berg, and Altner, M., (1999), , Process identification using simultaneous heat and mass transfer
     HAM: theory and modelling,

314. Berglund, B. and Gunnarsson, A.G, (2000), , Relationships between occupant personality and the sick building syndrome explored
     IAQ: sick building syndrome, SBS, mathematics: regression analysis / fitting, occupancy, occupants, residents, homeowner,

315. Bergmann, A., (2002), , Business: working internationally lessons learned
     construction industry, market, trend, future,

316. Bergmann, W. Bergmann, I. and Faninger, G., (2008), , Solar Heat Worldwide Markets and Contribution to the Energy Supply 2006, Edition 2008
     solar: utilization of solar energy,

317. Berkhout, F., (2002), , Technological regimes, path dependency and the environment
     technology,

318. Berkowicz, R., Prahm, L. P., (1979), , Generalization of K Theory for Turbulent Diffusion. Part I: Spectral Turbulent Diffusivity Concept
     HAM: theory and modelling,

319. Bermingham, S., Maltby, L. and Cooke, R. C., (1995), , A critical assessment of the validity of ergosterol as an indicator of fungal biomass
     fungi: assessment, sampling and analysis,

320. Bernier, T. and Landry, J., (2000), , Algorithmic recognition of biological objects
     fungi: assessment, sampling and analysis, mathematics: image processing,

321. Bernstein, R. S., W. G. Sorenson, D. Garabrant, and R. D. Treitman, (1983), , Exposures to respirable, airborne penicillium from a contaminated ventilation system: Clinical, environmental epidemiological aspects
     fungi: health effects,

322. B¨¦rub¨¦-Dufour, M., (2005), , Quantification of air leaks through the building envelope using infrared thermography

323. Besharat, F., Dehghan, A. A. and Faghih, A. R., (2013), , Empirical models for estimating global solar radiation: A review and case study

324. Bessoudo, M., Tzempelikos, A., Athienitis, A. K. and Zmeureanu, R., (2010), , Indoor thermal environmental conditions near glazed facades with shading devices ?Part I: Experiments and building thermal model

325. Bhatnagar, P. and Nema, R. K., (2013), , Maximum power point tracking control techniques: State-of-the-art in photovoltaic applications

326. Bhattacharya, K., Raha, S. and Majumdar, M. R., (2001), , Measuring indoor fungal contaminants in rural West Bengal, India, with reference to allergy symptoms
     fungi: components and products,

327. BIA, (1989), , Manufacturing, classification, and selection of brick - classification, part 2
     brick, masonry, mortar,

328. BIA, (2002), , Overview of building code requirements for masonry structures (ACI 530-02/ASCE 5-02/TMS 402-02) and Specification for Masonry Structures (ACI 530.1-02/ASCE 6-02/TMS 602-02)
     brick, masonry, mortar, building codes and standards,

329. BIA, (2002), , Overview group on weathertightness of buildings
     WRB weather-resistive barrier, house wrap,

330. Biagini, R. E., (2001), , From fungal exposure to disease: a biological monitoring conundrum
     fungi: assessment, sampling and analysis, fungi: components and products,

331. Bich, W., Cox, M. and Harris, P.M., (2006), , Evolution of the 'Guide to the Expression of Uncertainty in Measurement'
     mathematics: error analysis, uncertainty analysis,

332. Bilimoria, C. M., (1999), , Use of computers and the internet to facilitate export of prefabricated housing from Canada
     prefabricate buildings, manufactured housing,

333. BIPM, (2009), , Evaluation of measurement data ¨C An introduction to the "Guide to the expression of uncertainty in measurement" and related documents

334. BIPM, (2008), , Evaluation of measurement data ¨C Supplement 1 to the "Guide to the expression of uncertainty in measurement" ¨C Propagation of distributions using a Monte Carlo method

335. BIPM, (2008), , Evaluation of measurement data ¨C Guide to the expression of uncertainty in measurement

336. BIPM, (2011), , Evaluation of measurement data ¨C Supplement 2 to the "Guide to the expression of uncertainty in measurement" ¨C Extension to any number of output quantities

337. BIPM, IEC, IFCC, ILAC, ISO, IUPAC, IUPAP and OIML, (2008), , JCGM 101:2008 -- Evaluation of measurement data -- Supplement 1 to the Guide to the expression of uncertainty in measurement -- Propagation of distributions using a Monte Carlo method
     mathematics: error analysis, uncertainty analysis,

338. BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, OIML, (1995), , Guide to the expression of uncertainty in measurement (GUM), second ed.
     mathematics: error analysis, uncertainty analysis,

339. Bishop, A. P., (1995), , Working towards an understanding of digital library use
     Resources: statistics,

340. Biswas, K., Lu, J., Soroushian, P. and Shrestha, S., (2014), , Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard,

341. Bjurman, J., (1994), , Ergosterol as an indicator of mould growth on wood in relation to culture age, humidity stress and nutrient level
     fungi: components and products,

342. Black, M.S., T. Worthan and P. Morey, (1998), , Microbial VOCs as indicators for mold growth in buildings
     fungi: MVOC - microbial volatile organic compound, VOC,

343. Blanchard, S. and Reppe, P., (1998), , Life cycle analysis of a residential home in Michigan
     building: residential, house, home, embodied energy, life cycle assessment (LCA),

344. Blanes, V. and Pedersen, S., (2005), , Ventilation flow in pig houses measured and calculated by carbon dioxide
     ventilation: measurement,

345. Blay, D. and Gautier., B., (1994), , Fluid flow through a horizontal aperture between two enclosures at different temperatures
     Indoor air movement-CFD,

346. Blismas, N., Pasquire, C. and Gibb, A., (2006), , Benefit evaluation for off-site production in construction

347. Block, S. S., (1953), , Humidity requirements for mold growth
     fungi: growth and growth model,

348. Blocken, B., (2004), , Quantification of driving rain as a boundary condition for water flow modelling in building parts
     wind driven rain, wind-driven rain: CFD models,

349. Blocken, B. and Carmelie, J., (1999), , Spatial and temporal distribution of driving rain on buildings: numerical simulation and experimental verification
     rain on walls, rain precipitation, simulation: wind-driven rain, wind driven rain, wind-driven rain: CFD models,

350. Blocken, B. and Carmeliet, J., (2000), , Driving rain on building envelopes II: representative experimental data for driving rain estimation
     wind-driven rain: CFD models,

351. Blocken, B. and Carmeliet, J., (2002), , Spatial and temporal distribution of driving rain on a low-rise building
     rain on walls, rain precipitation,

352. Blocken, B. and Carmeliet, J., (2004), , A review of wind-driven rain research in building science
     Fa?ade wetting, water runoff, soiling, wind driven rain, wind-driven rain: CFD models,

353. Blocken, B. and Carmeliet, J., (2012), , A simplified numerical model for rainwater runoff on building facades: Possibilities and limitations

354. Blocken, B., Carmeliet, J., (2004), , Pedestrian wind environment around buildings: literature review and practical examples
     wind,

355. Blocken, B., Derome, D. and Carmeliet, J., (2013), , Rainwater runoff from building facades: A review

356. Blocken, B., Desadeleer, W. and Carmeliet, J., (2002), , Wind, rain and the building envelope: studies at the Laboratory of Building Physics, KULeuven
     wind-driven rain: CFD models,

357. Blomgren, S., (2003), , Changes to building research funding in Sweden
     research, funding,

358. Blomqvist, C., (2008), , Conversion of electric heating in buildings An unconventional alternative

359. Bluyssen, P. M., (2010), , Towards new methods and ways to create healthy and comfortable buildings

360. Bluyssen, P. M., (2009), , Towards an integrative approach of improving indoor air quality
     IAQ: Guidelines,

361. Boccaletti, C., Felice, P. and Santini, E., (2014), , Integration of renewable power systems in an Antarctic Research Station

362. Bock, R., Schleibinger, H., Ruden, H., (1997), , Moisture content of different new and used air filter media under static climatic conditions
     moisture in buildings,

363. Bodart, M. and De_Herde, A., (2002), , Global energy savings in offices buildings by the use of daylighting
     lighting, daylighting,

364. Boei, W., (2002), , Thousands more leaky condos as crisis spreads to highrises: Problems are surfacing with mould, exterior panels
     BC leaky condos, building: condo / condominium, EIFS damage,

365. Boelter, L. M. K., Gordon, H. S. and Griffin, J. R., (1946), , Free evaporation into air of water from a free horizontal quiet surface
     condensation and evaporation,

366. Bojic, M., Nikolic, N., Nikolic, D., Skerlic, J. and Miletic, I., (2011), , Toward a positive-net-energy residential building in Serbian conditions

367. Boland, J., Huang, J. and Ridley, B., (2013), , Decomposing global solar radiation into its direct and diffuse components

368. Bolashikov, Z. D. and Melikov, A. K., (2009), , Methods for air cleaning and protection of building occupants from airborne pathogens
     IAQ - indoor air quality,

369. Boles, B., (1998), , A study of recurring mold problems on the Roseau River Reserve, Manitoba
     fungi: molds in buildings,

370. Bollmann, J., Brabec. B., Corte, M. Y. and Geisen, M., (1999), , Determination of absolute coccolith abundances in deep-sea sediments by spiking with microbeads and spraying (SMS-method)
     fungi: assessment, sampling and analysis,

371. Bomberg M. and Thorsell T. , (2008), , Integrated methodology for evaluation of energy performance of the building enclosures

372. Bomberg, M. and Andreas, F., (2013), , The energy conundrum of modern buildings

373. Bomberg, M. and Brown, W., (1993), , Building envelope: Heat, air and moisture interactions
     HAM hygrothermal simulation,

374. Bomberg, M. and Brown, W., (1993), , Building envelope and environmental control: issues of system integration
     envelope, envelope design,

375. Bomberg, M. and Onysko, D. M., (2002), , Heat, air and moisture control in walls of Canadian houses: a review of the historic basis for current practices
     moisture control, moisture management, surveys, reviews, statistics,

376. Bomberg, M. T. and Brown, W. C., (1993), , Building envelope and environmental control - Part 3: Issues of system integration
     envelope, envelope design,

377. Bomberg, M. T. and Kumaran, M. K., (1993), , Building envelope design, Part 2: estimating field performance of thermal insulation
     envelope design, experiment: field testing and monitoring programs, insulation, thermal analysis and performance,

378. Bomberg, M., Carmeliet, J., Grunewald, J., Holm, A., Karagiozis, A., Kuenzel, H. and Roels, S., (2002), , Position paper on material characterization and HAM model benchmarking
     HAM: material properties, material properties: hygrothermal, measurement: hygrothermal properties,

379. Bomberg, M., J. Lstiburek, and F. Nabhan, (1997), , Performance evaluation of exterior insulation and finish systems (EIFS)
     EIFS,

380. Bomberg, M., Kumaran, K. and K. Day, (1999), , Moisture management of EIFS walls. Part 1.The basis for evaluation
     design, EIFS, moisture in buildings,

381. Bomberg, M., Pazera, M., Haghighat, F. and Grunewald, J., (2002), , Modified cup for testing of water vapour transmission through thick, permeable materials
     insulation, measurement: vapor diffusion properties, WVT, standards: ASTM,

382. Bomberg, M., Pazera, M., Plagge, R., (2005), , Analysis of selected water absorption coefficient measurements
     Isotherm,

383. Bomberg, M., Rousseau, M., Desmarais, G., Nicholls, M. and Lacasse, M.K, (2002), , Report from Task 2 of MEWS Project - Description of 17 Large Sale Wall Specimens Built for Water Entry Investigation in IRC Dynamic Wall Testing Facility
     experiment: laboratory, HAM hygrothermal simulation, validation of models,

384. Bomberg, M., Thorsell, T., (2008), , Integrated Methodology for Evaluation of Energy Performance of the Building Enclosures -- Part 1: Test Program Development

385. Bonacina, B. C. and Schrefler, B. A., (1997), , Some considerations on modeling heat and mass transfer in porous media
     HAM: material properties,

386. Bondi, P. and Stefanizzi, P., (2001), , Hygro-thermal performance of hollow bricks and current standards
     brick, masonry, mortar, experiment: hygrothermal performance, standards,

387. Bony, J. and Citherlet, S., (2007), , Numerical model and experimental validation of heat storage with phase change materials

388. Boonaert, C. J. P., Rouxhet, P. G. and Dufrene, Y. F., (2000), , Surface properties of microbial cells probed at the nanometre scale with atomic force microscopy
     bacteria, fungi: spore, aerosol, measurement and instrumentation,

389. Borchiellini, R., (1997), , Function estimation of ventilation rates from tracer gas measurement
     tracer gas method for measuring air exchange,

390. B?rjesson, P. and Gustavsson, L., (2000), , Greenhouse gas balances in building construction: wood versus concrete from life-cycle and forest land-use perspectives
     green building materials,

391. Borjesson, T., Stollman, U. and Schnurer, J., (1992), , Volatile metabolites produced by six fungal species compared with other indicators of fungal growth on cereal grains
     fungi: components and products, fungi: MVOC - microbial volatile organic compound,

392. B?rjesson, U. S. and Schn¨ąrer, J., (1990), , Volatile metabolites and other indicators of Penicillium aurantiogriseum growth on different substrates.
     fungi: components and products,

393. Bornehag, C., Blomquist, G., Gyntelberg, F., J?rvholm, B., Malmberg, P. and et al., (2001), , Dampness in buildings and health
     fungi: damp house -- health, moisture in buildings, surveys, reviews, statistics,

394. Bossink, B. A. G., (2004), , Managing Drivers of Innovation in Construction Networks
     construction industry, technology transfer,

395. Bouden, C., (2007), , Influence of glass curtain walls on the building thermal energy consumption under Tunisian climatic conditions: The case of administrative buildings
     curtain wall,

396. Bouguerra, A., Sallee, H., Barquin, F., Dheilly, R. M. and Queneudec, M., (1999), , Isothermal moisture properties of wood-cementitious composites
     concrete, Isotherm,

397. Bowen, I. S., (1926), , The ratio of heat losses by conduction and by evaporation from any water surface
     condensation and evaporation,

398. Bower, F., (2009), , Applied mechanics of solids

399. Bower, J., (2001), , Building a new healthy house
     IAQ - indoor air quality, sustainability, environment,

400. Bowman, D.A. and Thorsell, S.R, (2001), , Requirements of the 2000 International Building Code and 2000 International Residential Code on Exterior Insulation and Finish Systems
     building codes and standards, building: residential, house, home, EIFS, standards, WRB weather-resistive barrier, house wrap,

401. Bowser Technical Inc, (1995), , Verification of HRAI Depressurization Calculation - Final Report
     ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

402. Bowser, D., (2003), , Penetration of outdoor particles into a residence
     particle transport, penetration of particulate, through walls,

403. Box, E. P., W. G. Hunter and J. S. Hunter, (1978), , Statistics for experimenters: an introduction to design, data analysis, and model building
     mathematics: regression analysis / fitting,

404. Box, G. E. P. and Cox, D. R., (1964), , An analysis of transformations
     mathematics: statistics,

405. Boyd, J. and Banzhaf, S., (2007), , What are ecosystem services? The need for standardized environmental accounting unitsstar, open

406. Boyd, J. M. and Scheffler, M. J. (ed.), (1999), , Water problems in building exterior walls: evaluation, prevention, and repair
     EIFS damage, maintenance, inspection, and diagnose, moisture damages and problems for buildings,

407. Boyer, H. et al, (1999), , Building ventilation : a pressure airflow model computer generation and elements of validation
     computer codes for energy calculations, coupled energy and airflow calculation, moisture damages and problems for buildings, ventilation: air flow models, multi zone model, ventilation: airtightness, air leakage,,

408. BP, (2002), , BP statistical review of world energy - 2001 in review
     economical requirement of building envelope, energy, surveys, reviews, statistics,

409. Bradford, M., (2002), , Mold remediation being hampered by lack of standards
     fungi: damage to buildings, fungi: molds in buildings, fungi: remediation, treatment, prevention, standards discussion,

410. Brandt, E. and M. H. Hansen, (1999), , Measuring moisture content in wood with built in probes 20+ years experience
     measurement: moisture content,

411. Brandys, C., Brandys, G. M., (2005), , Worldwide exposure standards for mold and bacteria, 5th Ed.
     fungi: guideline, fungi: health effects,

412. Branker, K., Pathak, M. J. M. and Pearce, J. M., (2011), , A review of solar photovoltaic levelized cost of electricity

413. Brasel, T. L., Martin, J. M., Carriker, C. G., Wilson, S. C. and Straus, D. C., (2005), , Detection of Airborne Stachybotrys chartarum Macrocyclic Trichothecene Mycotoxins in the Indoor Environment
     fungi: assessment, sampling and analysis, fungi: Stachybotrys,

414. Breitenbach, J., (1999), , Measurements of angular and wavelength dependent optical properties using a unique photogoniometer design

415. Breitenbach, J., Lart, S., Langle, I. and Rosenfeld, J. L. J., (2001), , Optical and thermal performance of glazing with integral venetian blinds

416. Breivik, C., Jelle, B. P., Time, H., Nyg?rd, T., Bergheim, J. and Dalehaug, E., (2013), , Large-scale experimental wind-driven rain exposure investigations of building integrated photovoltaics

417. Breuer, D., (2002), , Measurement of biocides in metal working fluids and in workplace air using capillary electrophoresis
     measurement and instrumentation,

418. Brick Industry Association, (1991), , Anchored brick veneer wood frame construction
     brick, masonry, mortar, brick, masonry, mortar, wood frame houses and walls, wood structure,

419. Brickus, L. S. R., Siqueira, L. F. G., Neto, F. R. D. and Cardoso, J. N., (1998), , Occurrence of airborne bacteria and fungi in bayside offices in Rio de Janeiro, Brazil
     fungi: molds in buildings,

420. Brideau, S. A. and Collins, M. R., (2012), , Experimental Model Validation of a Hybrid PV/thermal Air based Collector with Impinging Jets

421. Brighi, B. and Hoernel, J., (2005), , Recent advances on similarity solutions arising during free convection
     CFD - computational fluid dynamics,

422. Brischke, C., Rapp, A.O. and Baye, R., (2008), , Measurement system for long-term recording of wood moisture content with internal conductively glued electrodes
     measurement: moisture content,

423. Broasa, P., (1996), , Ventilation through building walls - wind tunnel studies
     tracer gas method for measuring air exchange, ventilation: measurement, wind,

424. Brock, L and Brown, J, (2000), , The prefabricated house in the twenty-first century: What can we learn from Japan? A case study of the KST-Hokkaido house

425. Brophy, V., Clinch, J.P., Convery, F.J., Healy, J.D. King, C. and Levis, J.O, (1999), , Tools and techniques for the design and evaluation of energy efficient buildings
     energy efficiency,

426. Brown W. , Chouinard K. , Lawton M. , Patenaude A. , Vlooswyk J. , (2003), , Field experience with moisture management -- putting principles into practice
     experiment: field testing and monitoring programs, moisture control, moisture management,

427. Brown, H. S. and Vergragt, J, P., (2008), , Bounded socio-technical experiments as agents of systemic change: The case of a zero-energy residential building,

428. Brown, H. S. and Vergragt, P. J., (2008), , Bounded socio-technical experiments as agents of systemic change: The case of a zero-energy residential building

429. Brown, W. and Adams, P., Tonyan, T., Ullett, J., (1997), , Water management in exterior wall claddings
     cladding, siding, veneer,

430. Brown, W. C., Chown, G. A., Poirier, G. F. and Rousseau, M. Z., (1999), , Designing exterior walls according to the rainscreen principle
     rainscreen, pressure equalized rainscreen principle,

431. Brown, W., J. Ullett, A. N. Karagiozis, and T. Tonyan, (1997), , Barrier EIFS clad walls: Results from a moisture engineering study
     cladding, siding, veneer, EIFS, moisture engineering,

432. Brundrett, G. W., (1990), , Criteria for moisture control
     fungi: growth and growth model, moisture control, moisture management,

433. Brunner, S., Brunner, S., (2005), , Vacuum insulation panels for building application: Basic properties, aging mechanisms and service life

434. Brunnera, S. and Simmler, H., (2008), , In situ performance assessment of vacuum insulation panels in a flat roof construction

435. Brunskog, J., (2002), , Acoustic excitation and transmission of lightweight structures
     envelope,

436. Bruntland, G. (ed.), (1987), , Our common future: The World Commission on Environment and Development
     green building, sustainable building, sustainability, environment,

437. Bryson, D. K. and Rhine, J. R., (0), , Solving water intrusion and mold problems in North Carolina, legal claims arising out of mold and water problems
     fungi: damage to buildings, fungi: legal, law, litigation, insurance issues,

438. BSI, (1997), , 97/108355 DC, Hydrothermal performance of buildings under pulsating air pressure
     envelope performance, standards: European,

439. BSI, (1992), , Code of practice for assessing the exposure of walls to wind-driven rain
     standards, wind driven rain,

440. BSI, (2001), , BS EN 12865:2001 Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure
     envelope performance, standards: European, wind driven rain,

441. BSR/ASTM, (2000), , Z8311Z-200x, test method for water penetration of exterior windows, skylights, and doors by rapid pulsed air pressure difference
     rain penetration, water intrusion, standards: ASTM, standards: European, windows, doors, fenestration,

442. Buchanan, A. H., (2007), , Energy and CO2 advantages of wood for sustainable buildings
     green building materials,

443. Buchanana, . H. and Levineb, S. B., (2007), , Wood-based building materials and atmospheric carbon emissions
     sustainability, environment, wood frame houses and walls, wood structure,

444. Budaiwi, I., (1994), , Modelling of indoor air humidity transient behaviour: effect on exterior wall mositure performance
     Fazio's student: thesis, moisture in buildings, Whole building HAM: models,

445. Budaiwi, I., Abdou, A. and Al-homoud, M., (2002), , Variations of thermal conductivity of insulation materials under different operating temperatures: impact on envelope-induced cooling load
     insulation,

446. Budaiwi, I., El-diasty, R. and Abdou, A., (1999), , Modelling of moisture and thermal transient behaviour of multi-layer non-cavity walls
     HAM: computer models,

447. Buggenhout, S. V., Vranken, E., Schuysemans, S., Lemaire, J., Malcot, W. V. and Berckmans, D., (2005), , On-line airflow pattern measurement in ventilated buildings
     ventilation: measurement,

448. Building Engineering Group, (1996), , The Zero-Cavity and DPV Wall Project
     cavity wall, PV/T,

449. Building Envelope Engineering Inc, (2000), , Wall moisture problems in Alberta dwellings
     envelope damage, fungi: remediation, treatment, prevention, moisture damages and problems for buildings, moisture source for building envelope, WRB weather-resistive barrier, house wrap,

450. Building Science Consortium, (2003), , Introduction to Building Systems Performance: Houses That Work II
     building,

451. Building Science Consortium, (2004), , BSC Final Report: Lessons Learned from Building America Participation,
     housing project,

452. Built Green Colorado, (2005), , 2005 Guide to the Built Green Checklist
     green building project,

453. Bujalski, J. M., Tiller-jeffery, R., Watling, H. R. and Schwarz, M. P., (2003), , CFD modeling and comparison with experimental residence time distributions in single and two phase porous flows

454. Bulson, P. S., (1970), , The stability of flat plate

455. Bundesministerium f¨ąr Verkehr, Bau-und Wohnungswesen, (2001), , Guideline for sustainable building
     green building, sustainable building, guideline, service life prediction,

456. Bunz, K. R., Henze, G. P. and Tiller, D. K., (2006), , Survey of Sustainable Building Design Practices in North America, Europe, and Asia
     sustainability, environment,

457. Burch, D., (1995), , An analysis of moisture accumulation in the roof cavities of manufactured housing
     prefabricate buildings, manufactured housing, risk analysis, roof,

458. Burch, D. M. and Saunders, C. A., (1995), , Computer analysis of wall constructions in the moisture control handbook
     moisture control, moisture management,

459. Burch, D. M., Saunders, C.A. and TenWolde, A., (1995), , Manufactured housing walls that provide satisfactory moisture performance in all climates
     prefabricate buildings, manufactured housing,

460. Burch, D.M, (1997), , MOIST: A PC program for predicting heat and moisture transfer in building envelopes, Release 3.0
     coupled heat and moisture calculations,

461. Burch, D.M, (1991), , Indoor ventilation requirements for manufactured housing
     prefabricate buildings, manufactured housing, ventilation: infiltration of buildings, ventilation: standards,

462. Burch, D.M. , W.C. Thomas, and A.H. Fanney, (1992), , Water vapor permeability measurements of common building materials
     measurement: vapor diffusion properties, WVT,

463. Burch, D.M. and A.O. Desjarlais, (1995), , Water-vapor measurements of low-slope roofing materials
     HAM: material properties,

464. Burch, D.M. and Walton, G.N, (1997), , A mathematical analysis of moisture and heat transfer in the roof cavities of manufactured housing
     HAM: computer models,

465. Burch, D.M., R.R. Zarr, and Fanney, A. H., (1995), , Experimental verification of a moisture and heat transfer model in the hygroscopic regime
     experiment: laboratory, validation of models,

466. Burge, H. A., (2002), , An update on pollen and fungal spore aerobiology
     fungi: aerobiology, dispersion of spores,, fungi: assessment, sampling and analysis, fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound, fungi: spore, aerosol,

467. Burge, H. A., (2001), , Fungal growth in buildings: the aerobiological perspective
     fungi: aerobiology, dispersion of spores,, fungi: health effects, fungi: health effects,

468. Burge, H. A., H. J. Su, and J. D. Spengler, (1994), , Moisture, organisms, and health effects
     biodeterioration, fungi: health effects,

469. Burkinshaw, R., (0), , What is the moisture meter trying to tell us?
     measurement: moisture content,

470. Burnett, E., (2004), , Ventilation drying in enclosure wall systems
     envelope components,

471. Burnett, E. F. P., (2004), , Development of design strategies for rainscreen sheathing membrane performance in wood frame walls
     design, sheathing, wood frame houses and walls, wood structure,

472. Burnett, E.F.P. and A. J. Reynolds, (1992), , The Ontario wall drying project
     drying potential of building envelope, experiment: hygrothermal performance,

473. Burnett, J. H., (1994), , Fundamentals of mycology, 2nd Ed
     fungi and molds in buildings and their envelopes,

474. Busch, F., (1992), , A tale of two populations: thermal comfort in air-conditioned and naturally ventilated offices in Thailand
     ventilation: mechanical systems (HVAC),

475. Buttner, M. P. and Stetzenbach, L. D., (1996), , Use of an experimental room for monitoring of airborne concentrations of microorganisms, glass fibers, and total particles
     fungi: aerobiology, dispersion of spores,,

476. Buttner, M. P., Cruz-perez, P., Stetzenbach, L. D., Garrett, P. J. and Lutke, A. E., (2002), , Measurement of airborne fungal spore dispersal from three types of flooring materials
     fungi: aerobiology, dispersion of spores,, fungi: assessment, sampling and analysis, fungi: spore, aerosol,

477. Buzorius, G., Pekkanenb, J. and Kulmalaa, M., (1999), , Spatial variation of aerosol number concentration in Helsinki city
     fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

478. CABA, (2008), , Bright Green Buildings: Convergence of Green and Intelligent Buildings

479. Cabeza, L. F., Castell, A., Barreneche, C., Gracia, A. and Fern¨˘ndez, A. I., (2011), , Materials used as PCM in thermal energy storage in buildings: A review

480. Cadafalch, J., (2009), , A detailed numerical model for flat-plate solar thermal devices

481. CaGBC, (0), , The LEED Canada Professional Accreditation Handbook

482. Cahan, S. and Mora, Y., (2007), , Dysfunctional implications of narrow window theory: Variability in the intuitive assessment of correlation

483. Caia, J., Liub, B. and Su, Q., (2001), , Comparison of simultaneous distillation extraction and solid phase microextraction for the determination of volatile flavour components
     measurement: SPME, VOC: measurement and identification,

484. California Department of Health Services, (1998), , Health effects of toxin-producing indoor molds in California
     country: US, fungi and molds in buildings and their envelopes, fungi: health effects, WRB weather-resistive barrier, house wrap,

485. Camilleri, M., Roman Jaques, Nigel Isaacs, (2001), , Impacts of climate change performance on building in New Zealand
     country: other, weather, climates,

486. Campbell, J., Casteel, C., Chen, K. and Tuday, M., (2002), , Sampling and analysis of microbial volatile organic compounds (MVOCs)
     fungi: MVOC - microbial volatile organic compound, measurement and instrumentation, measurement: GC-MS, standards,

487. Campbell, J., Casteel, C., Tuday, and M., Valley, (0), , Validation of a method for the sampling and analysis of microbial volatile organic compounds (MVOCs)
     fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound,

488. Camuffo, D., Monte, M. D., Sabbioni, C. and Vittori, O., (1982), , Wetting, deterioration and visual features of stone surfaces in an urban area
     Fa?ade wetting, water runoff, soiling,

489. Canadian Building Envelope Science and Technology, (1995), , Monitoring of cavity humidity levels at Canada life building
     cavity wall,

490. Canadian Forest Service, Natural Resources Canada, (2001), , Market trends and prospects
     country: Canada, market, trend, future,

491. Canadian Wood Council, (2004), , THE SPAN BOOK : span tables for the Canadian dimension lumber and glued-laminated timber
     wood, lumber, timber,

492. Candanedo, L., (2005), , Characterization and modeling of unsaturated water liquid transport in softwoods

493. CanGBC, (2004), , LEED Canada-NC v1.0 Green Building Rating System
     green building, sustainable building,

494. Canmet, (1993), , The determination of fenestration solar heat gain coefficient using simulated solar irradiance

495. CANMET, (1993), , Technical requirements for advanced houses
     housing project,

496. CANMET, (1996), , Advanced house technologies assessment: summary report
     technology,

497. Cannavale, A., Fiorito, F., Manca, M., Tortorici, G., Cingolani, R. and Gigli, G., (2010), , Multifunctional bioinspired sol-gel coatings for architectural glasses

498. Canot, E. , March, E. , Muhieddine, M., (2009), , Various approaches for solving problems in heat conduction with phase change

499. Carbonell, D., Cadafalch, J. and Consul, R., (2013), , Dynamic modelling of flat plate solar collectors. Analysis and validation under thermosyphon conditions

500. Carlisle, N., Geet, A. V. and Pless, P., (2009), , Definition of a "Zero Net Energy" Community

501. Carll, C., (2000), , Rainwater intrusion in light-frame building walls
     EIFS, envelope design, rain penetration, water intrusion, wind driven rain,

502. Carll, C. and TenWolde, A., Carll, C., (1996), , Accuracy of wood resistance sensors for measurement of humidity
     measurement: moisture content,

503. Carll, C. G. and Highley, T. L., (1999), , Decay of wood and wood-based products above ground in buildings, Mechanism of Brown-Rot Decay: Paradigm or Paradox
     fungi and molds in buildings and their envelopes, fungi: growth and growth model, wood, lumber, timber,

504. Carll, C., Knaebe, M., Malinauskas, V., Sotos, P. and Tenwolde, A., (2000), , Performance of back-primed and factory-finished hardboard lap siding in southern florida
     cladding, siding, veneer, cladding, siding, veneer, wood panel,

505. Carlson, N., Quraishi, A., (2001), , Anatomy of a Fungal Problem
     fungi: health effects, fungi: MVOC - microbial volatile organic compound,

506. Carlsson, B., Virtanen, Y., N?kleby, J.O. and Sandstr?m, R., (2001), , A holistic approach to materials selection in component design
     design, embodied energy, service life prediction,

507. Carmeliet, J. and Roels, S., (2002), , Determination of the moisture capacity of porous building materials
     capillary break, HAM: material properties, sorption process: mathematical model,

508. Carmeliet, J. and S. Roels, (2002), , Description of the moisture capacity of building materials
     capillary break, HAM: material properties, material property: pore size distribution, Whole building HAM: humidity level in houses, Whole building HAM: models,

509. Carmeliet, J., Descamps, F. and Houvenaghel, G., (1999), , A multiscale network model for simulating moisture transfer properties of porous media
     coupled heat and moisture calculations, simulation of building process,

510. Carmeliet, J., Hens, H., Roels, S., Adan, O., Brocken, H., Cerny, R., Pavlik, Z., Hall, C., Kumaran, K. and Pel, L., (2004), , Determination of the liquid water diffusivity from transient moisture transfer experiments
     HAM: application, measurement: hygrothermal properties,

511. Carmeliet, J., Roels, S., (2001), , Determination of the isothermal moisture transport properties of porous building materials
     material properties: hygrothermal, measurement: vapor diffusion properties, WVT,

512. Carrero, C., Ramirez, D., Rodriguez, J. and Platero, C. A., (2011), , Accurate and fast convergence method for parameter estimation of PV generators based on three main points of the I-V curve

513. Carroll, M., (2001), , Wall sheathing creates headaches for builder, homeowners
     envelope damage, OSB - Oriented strandboard, sheathing, structure aspect, strength and rigidity of building envelope,

514. Carson, D. B. and Cooney, J. J., (1990), , Microbodies in fungi - a review
     fungi and molds in buildings and their envelopes, fungi: components and products, fungi: mycology studies, culturing, fungi: spore, aerosol,

515. Casarona, R. B. and Mcqueen, A. E., (2002), , Legal issues involving mold contamination, BSC Final Report: Lessons Learned from Building America Participation
     fungi: damage to buildings, fungi: legal, law, litigation, insurance issues,

516. Cassens, D. L., (1991), , Sap stain in hardwood logs and lumber
     fungi and molds in buildings and their envelopes, wood, lumber, timber,

517. Cassens, D. L. and Feist, W. C., (1991), , Exterior wood in the South: selection, applications, and finishes
     cladding, siding, veneer, wood, lumber, timber,

518. CCE, (2001), , Canadian consulting engineering awards 2001
     country: Canada,

519. CCE, (2001), , Sustainable design for a building "skin"
     double facades, green building project, Renewable energy: solar,

520. CCE, (1999), , Green Building Challenge case study
     green building project,

521. CCE, (1999), , Common VOCs & Their Sources
     VOC,

522. CCE, (2001), , Project management: mega-building risks
     building: damage and failures, surveys, reviews, statistics,

523. CCE, (2002), , Building study: going natural
     green building project, ventilation - Air Infiltration and Ventilation in Buildings,

524. CCE, (2001), , Relation between objective and sub-objectives, division A
     building codes and standards, objective-based codes,

525. CCE, (1999), , Green Building: Challenge poster project
     green building project, green building, sustainable building,

526. CEC, (2008), , Green Building in North America: Opportunities and Challenges
     green building project, green building, sustainable building,

527. Cekon, M., Kalousek, M., Hraska, J. and Ingeli, R., (2014), , Spectral optical properties and thermodynamic performance of reflective coatings in a mild climate zone

528. Cellura, M., Gangi, A. and Orioli, A., (2012), , A photographic method to estimate the shading effect of obstructions

529. Cemy, R. and Drchalovi, J., (1995), , Measuring the moisture diffusivity of board materials
     measurement: vapor diffusion properties, WVT,

530. Center for Housing Research at Virginia Polytechnic, (2000), , Industrializing the residential construction site
     building subsystems: electrical, construction industry, market, trend, future,

531. Cerdeira, F., Vazquez, M. E., Collazo, J. and Granada, E., (2011), , Applicability of infrared thermography to the study of the behaviour of stone panels as building envelopes

532. Cerny, R. and Toman, J., (1998), , Determination of temperature- and moisture-dependent thermal conductivity by solving the inverse problem of heat conduction
     HAM: theory and modelling, measurement: thermal properties,

533. Cerny, R., Hoskova, S. and Tofnan, J., (1995), , A transient method for measuring the water vapor diffusion in porous building materials
     measurement: vapor diffusion properties, WVT,

534. Cerny, R., Podebradska, J. and Drchalova, J., (2002), , Water and water vapor penetration through coatings
     material properties: hygrothermal, measurement: vapor diffusion properties, WVT,

535. Cerolini, S., D'orazio, M., Di_Perna, C. and Stazi, A., (2009), , Moisture buffering capacity of highly absorbing materials
     Moisture buffering,

536. Ceron, I., Caamano-martin, E. and Neila, F. J., (2013), , 'State-of-the-art' of building integrated photovoltaic products

537. Cestari, C. B. and S. Cravero And S. C. C. Lombardi, (1999), , The problem of the durability of materials used in the rehabilitation of historic timber roofs- rehabilitation of historic timber roofs
     durability: building envelope, durability: materials and components, renovation, repair, maintenance, roof, wood, lumber, timber,

538. CGSB, (1999), , 149.15-96-CAN/CGSB, Determination of the Overall Envelope Airtightness of Buildings by the Fan Pressurization Method Using the Building's Air Handling Systems
     ventilation: airtightness, air leakage,,

539. CGSB, (1986), , CAN/CGSB/49.10 M86, Determination of overall envelope airtightness of buildings by the fan depressurization method
     standards: CSA,

540. Ch. Maierhofer A. Brink, M. R?llig and H. Wiggenhauser, (2005), , Quantitative impulse-thermography as non-destructive testing method in civil engineering -- Experimental results and numerical simulations
     Infrared thermography (IRT),

541. Chai, M. and Pawliszyn, J., (1995), , Analysis of environmental air samples by solid-phase microextraction and gas-chromatography ion-trap mass-spectrometry
     measurement: SPME,

542. Chainer, J., (2001), , Home steel home - AK steel partners with AgION^TM to build world's first antimicrobial steel house
     envelope design, fungi: molds in buildings,

543. Chaiwiwatworakul, P., Chirarattananon, S. and Rakkwamsuk, P., (2009), , Application of automated blind for daylighting in tropical region

544. Chan, D. S. H., Phillips, J. R. and Phang, J. C. H., (1986), , A comparative study of extraction methods for solar cell model parameters

545. Chan, H., Riffat, S. B. and Zhu, J., (2010), , Review of passive solar heating and cooling technologies
     Renewable energy: solar,

546. Chang, C. -. and Chang, M., (2009), , Inverse determination of thermal conductivity using semi-discretization method

547. Chang, J. S., Nong, G., Mason, M. A., Howard, E. M. and Brown, S. K., (1999), , Assessing the performance of full-scale environmental chambers using an independently measured emissions source
     experiment: laboratory,

548. Chang, W. J. and C. I. Weng, (1997), , An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture
     HAM: simplified models - analytical methods, HAM: simplified models - simplification, mathematics: numerical method, finite difference, finite element,

549. Chantawong, P., Hirunlabh, J., Zeghmati, B., Khedari, J., Teekasap, S. and Win, M.M., (2006), , Investigation on thermal performance of glazed solar chimney walls
     solar: utilization of solar energy,

550. Chao, C. Y. H., Wan, M. P. and Cheng, d. C. K., (2003), , Penetration coefficient and deposition rate as a function of particle size in non-smoking naturally ventilated residences
     particle transport, penetration of particulate, through walls,

551. Chao, H.J, Schwartz, J., Milton, D.K and Burge, H.A, (2002), , Populations and determinants of airborne fungi in large office buildings
     fungi: aerobiology, dispersion of spores,, fungi: assessment, sampling and analysis, fungi: molds in buildings, PCA -- Principal component analysis,

552. Chapman, J. A., Terr, A., Jacobs, R. L., Charlesworth, E. N. and Bardana, E. J., (2003), , Toxic mold: phantom risk vs science
     fungi: components and products - mycotoxin,

553. Charette, R. P. and Marshall, H. E., (1999), , UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Cost Analysis
     standards: ASTM,

554. Chasar, D. A., Shirey, D. B., (1999), , Impact of ASHRAE Standard 62-1989 on Florida retail stores
     IAQ - indoor air quality,

555. Chebil S. , Galanis N. and Zmeureanu R., (2003), , Computer simulation of air infiltration effects on heat transfer in multilayered walls
     energy: calculation, ventilation: infiltration of buildings,

556. Chehab, O., (1994), , The intelligent facade photovoltaic and architecture
     PV PV Photovoltaic,

557. Chelelgo, J., Haverinen, U., Vahteristo, M., Koivisto, J., Husman, T., Nevalainen, A. and Jaaskelainen, E., (2001), , Analysis of moisture findings in the interior spaces of Finnish housing stock
     fungi: molds in buildings, Whole building HAM: humidity level in houses,

558. Chen, C., Chock, D. P. and Winkler, S. L., (1999), , A simulation study of confounding in generalized linear models for air pollution epidemiology
     IAQ: measurement,

559. Chen, C., Weng, Y., Lin, W., Kuo, Y., Chung, and Shih, T., (2002), , Development of aerosol number samplers using foam filters
     fungi: assessment, sampling and analysis,

560. Chen, F., Wittkopf, S. K., Ng, P. K. and Du, H., (2012), , Solar heat gain coefficient measurement of semi-transparent photovoltaic modules with indoor calorimetric hot box and solar simulator

561. Chen, H., Besant, R. W., and Tao, Y., (1997), , Two-dimensional air exfiltration and heat transfer through fiberglass insulation I -- numerical model and experimental facility
     ventilation: infiltration of buildings,

562. Chen, H., Shu, C., Chiang, C. and Lee, S., (2011), , The Indoor Thermal Research of the HCRI-BIPV Smart Window

563. Chen, J. and Poon, C., (2009), , Photocatalytic construction and building materials: From fundamentals to applications
     material, technology,

564. Chen, P., (2006), , A confidence interval for the number of principal components
     PCA -- Principal component analysis,

565. Chen, Q., (2009), , Ventilation performance prediction for buildings: A method overview and recent applications
     Indoor air movement-CFD,

566. Chen, Q., (2011), , Impact factor for a journal and impact of an author: are they the same?

567. Chen, Q., (1999), , Prediction of room air motion by Reynolds-stress models
     Indoor air movement-CFD,

568. Chen, Q. and Srebric, J., (2001), , How to verify, validate, and report indoors environmental modeling CFD
     Indoor air movement-CFD,

569. Chen, Q., Xu, W., (1998), , A zero-equation turbulence model for indoor airflow simulation
     Indoor air movement-CFD,

570. Chen, Y. and Wang, S., (2001), , Transfer function model and frequency domain validation of moisture sorption in air-conditioned buildings
     Whole building HAM: humidity level in houses,

571. Chen, Y., Athienitis, A. K. and Galal, K., (2010), , Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept
     BIPV, PV/T,

572. Chen, Y., Galal, K., Athienitis, A. K. and Modeling,, (2010), , design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 2, ventilated concrete slab
     BIPV, PV/T,

573. Cheng, Y. S., Barr, E. B., Fan, B. J., Hargis, P. J., Rader, D. J., O'hern, T. J., et al, (1999), , Detection of bioaerosols using multiwavelength UV fluorescence spectroscopy
     fungi: assessment, sampling and analysis,

574. Cheng, Y. S., Lu, J. C. and Chen, T. R., (1998), , Efficiency of a portable indoor air cleaner in removing pollens and fungal spores
     fungi: spore, aerosol,

575. Chengweia, Y., Aryaa, S. P., Davisa, J. and Maina, C. E., (1997), , A numerical model of the transport and diffusion of Peronospora tabacina spores in the evolving atmospheric boundary layer
     fungi: aerobiology, dispersion of spores,,

576. Cheple, M. and Huelman, P. H., (2000), , Literature review of exterior insulation finish systems and stucco finishes
     EIFS, EIFS damage, fungi: legal, law, litigation, insurance issues, surveys, reviews, statistics,

577. Chesn¨¦, L., Duforestel, T., Roux, J. and Rusaou?n, G., (2012), , Energy saving and environmental resources potentials: Toward new methods of building design

578. Chew, G. L., Douwes, J., Doekes, G., Higgins, K. M., Strien, R. V., Spithoven, J. and Brunekreef, B., (2001), , Fungal extracellular polysaccharides, (13)-glucans and culturable fungi in repeated sampling of house dust
     experiment: mycology study, fungi and molds in buildings and their envelopes,

579. Chew, G. L., Rogers, C., Burge, H. A., Muilenberg, M. L. and Gold, D. R., (2003), , Dustborne and airborne fungal propagules represent a different spectrum of fungi with differing relations to home characteristics
     fungi: components and products,

580. Chew, M. and Tan, P. P., (2003), , Facade staining arising from design features
     Fa?ade wetting, water runoff, soiling,

581. Chew, M. Y. L., (2005), , Defect analysis in wet areas of buildings
     envelope damage,

582. Chew, M. Y. L., Tan, S. S. and Kang, K. H., (2004), , Building maintainability--review of state of the art
     maintenance, inspection, and diagnose,

583. CHIC, (1999), , Envelope Moisture Performance Through Infiltration, Exfiltration And Diffusion - EMPTIED
     HAM: computer models,

584. Chistophersen, J. (Ed), (2004), , Universal design -- with contribution from Asia, Australia, North America and Europe
     design,

585. CHMC, (2002), , Moldy houses: why they are and why we care & additional analysis of Wallaceburg data: the wallaceburg health and housing studies
     fungi: damp house -- health,

586. Chockalingham, S., (1979), , A Study of Shear Diaphragms and Clad Multistory Frames
     Fazio's student: thesis,

587. Choi, E. C. C., (1999), , Wind-driven rain on building faces and the driving-rain index
     rain on walls, rain precipitation, wind driven rain, wind-driven rain: CFD models,

588. Choi, E. C. C., (2001), , Wind-driven rain and driving rain coefficient during thunderstorms and non-thunderstorms
     wind driven rain, wind-driven rain: CFD models,

589. Choi, E. C. C., (1998), , Criteria for water penetration testing
     rain penetration, water intrusion,

590. Choi, E. C. C., (2000), , Variation of wind-driven rain intensity with building orientation
     building: simulation of building processes, rain on walls, rain precipitation, wind driven rain, wind-driven rain: CFD models,

591. Choi, E. C. C., (1992), , Simulation of wind-driven-rain around a building
     rain penetration, water intrusion, simulation: wind-driven rain, wind driven rain, wind-driven rain: CFD models,

592. Chouinard, K. L. and Lawton, M. D., (0), , Rotting wood framed apartments -- not just a Vancouver problem
     BC leaky condos, wood frame houses and walls, wood structure,

593. Chow, T. T., (2010), , A review on photovoltaic/thermal hybrid solar technology
     PV PV Photovoltaic, PV/T,

594. Chow, T. T., Fong, K. F., He, W., Lin, Z. and Chan, A. L. S., (2007), , Performance evaluation of a PV ventilated window applying to office building of Hong Kong
     PV PV Photovoltaic,

595. Chow, T. T., Hand, J. W. and Strachan, P. A., (2003), , Building-integrated photovoltaic and thermal applications in a subtropical hotel building
     BIPV, PV/T,

596. Chow, T. T., Pei, G., Chan, L. S., Lin, Z., Fong , K. F., (2009), , A Comparative Study of PV Glazing Performance in Warm Climate
     PV PV Photovoltaic, PV/T,

597. Chow, T., Li, C. and Lin, Z., (2010), , Innovative solar windows for cooling-demand climate
     windows, doors, fenestration,

598. Chown, G. A., Brown, W. C. and Poirier, G. F., (1997), , Evolution of wall design for controlling rain penetration
     envelope design, rain penetration, water intrusion,

599. Chown, M., (2003), , Building simulation as an aide to design
     simulation of building process,

600. Christen, K., (2002), , Mold growth linked to airtight building designs
     fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations,

601. Christensen, G. and Bunch-nielsen, T., (2002), , A "follow-up" study of moisture conditions and performance of moisture sensors in flat roofs provided with exterior insulation in the late seventies
     experiment: field testing and monitoring programs, experiment: hygrothermal performance,

602. Christian, J. E., J. Kosny, A. O. Desjarlais, and P. W. Childs, (1998), , The whole wall thermal performance calculator-on the net
     thermal analysis and performance,

603. Chu, S., Fang, T. and Chang, W., (2009), , Modelling of coupled heat and moisture transfer in porous construction materials
     HAM: theory and modelling,

604. Chung, K. and Hsu, S., (2001), , Effect of ventilation pattern on room air and contaminant distribution

605. Chwieduk, D. A., (2009), , Recommendation on modelling of solar energy incident on a building envelope

606. CICA, (2000), , Industry as a partner for sustainable development: construction
     construction industry, sustainability, environment,

607. Ciferri, O., (1999), , Microbial degradation of paintings
     fungi: damage to buildings,

608. Cinnamon, A. D., (2008), , Innovative products for curtain walls: investigation of anti-reflective glass coating
     curtain wall,

609. CIRIA,, (1999), , Standardisation and Pre-assembly Adding Value to Construction Projects

610. Citherlet, S., (2001), , Towards the holistic assessment of building performance based on an integrated simulation approach
     simulation of building process,

611. Citherlet, S., Clarke., J. A. and Hand, J., (2001), , Integration in building physics simulation
     simulation of building process,

612. Claeson, A. S., Levin, J. O., Blomquist, G. and Sunesson, A. L., (2002), , Volatile metabolites from microorganisms grown on humid building materials and synthetic media
     fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound, measurement: GC-MS,

613. Clark, W. and Lun, H., (2007), , Sustainable development in practice
     sustainability, environment,

614. Clarke, J. A., C. M. Johnstone, N. J. Kelly, R. C. McLean, J. A. Anderson, N. J. Rowan, and J. E. Smith, (1999), , A technique for the prediction of the conditions leading to mould growth in buildings
     fungi: growth and growth model, fungi: molds in buildings,

615. Clarke, J. A., Evans, M. S., Grant, A. D. and Kelly., N., (1997), , Simulation Tools For The Exploitation Of Renewable Energy In The Built Environment: The Entrack-Gis System
     built environment, computer codes for energy calculations, energy, Renewable energy, simulation: energy,

616. Clarke, J. A., Hensen, J. and Janak, M., (1998), , Integrated building simulation: state-of-the-art, Introducing Building Energy Simulation Classes on the Web
     building: simulation of building processes, simulation of building process, technology transfer,

617. Clarke, J. A., Hensen, J. L. M., Johnstone, C. M. and Macdonald, I., (1999), , On the use of simulation in the design of embedded energy systems
     embodied energy, simulation of building process,

618. Clarke, J. A., Johnstone, C. M., Kelly, N. J., Mclean, R. C. and Nakhi, A. E., (1997), , Development of a simulation tool for mould growth prediction in buildings
     fungi: growth and growth model, simulation of building process,

619. Clarke, J.A., (2001), , Integrated Building Performance Simulation
     simulation of building process,

620. Clarke, J.A., (2002), , Performance Prediction Tools for Low Impact Building Design
     simulation: energy,

621. Clarke, J.A., (1985), , Energy simulation in building design
     computer codes for energy calculations, coupled energy and airflow calculation, energy, energy and moisture in building, simulation of building process,

622. Clausen, C. A., (1997), , Immunological detection of wood decay fungi - an overview of techniques developed from 1986
     experiment: mycology study, fungi and molds in buildings and their envelopes, fungi: mycology studies, culturing, wood, lumber, timber,

623. Clayton Research Associates Ltd., (2006), , Profile and Prospects of the Factory-built Housing Industry in Canada

624. Clements-croome, D. J., Awbi, H. B., Bak¨®-bir¨®, N. K. and Williams, M., (2008), , Ventilation rates in schools
     ventilation: measurement,

625. Cliff, C. D., (2006), , Curtain wall designs for wind and blast: three case studies
     curtain wall,

626. Clifford, A. A., (1973), , Multivariate error analysis: a handbook of error propagation and calculation in many-parameter system
     mathematics: error analysis, uncertainty analysis,

627. Cloud Jumper Designs, (2010), , History of Native peoples in Canada

628. CMA Chalifour, Marcotte et Associ¨¦s Inc., (1991), , Air tightness, air movement and indoor air quality in Quebec high-rise apartment buildings
     building: highrise, IAQ - indoor air quality, ventilation: airtightness, air leakage,,

629. CMHC, (1997), , Testing rainscreen wall and window systems: the cavity excitation method
     cavity wall, rainscreen, pressure equalized rainscreen principle,

630. CMHC, (2003), , Review of hygrothermal models for building envelope retrofit analys
     HAM: computer models,

631. CMHC, (0), , A Comparison of Canadian and German Building Methods, Codes and Standards for Wood-Frame Construction
     housing market, standards discussion, wood frame houses and walls, wood structure,

632. CMHC, (1998), , Before You Renovate
     renovation, repair, maintenance,

633. CMHC, (1988), , Drying characteristics in tibmer frame walls of low-rise residential housing
     building: residential, house, home, wood frame houses and walls, wood structure,

634. CMHC, (0), , Habitat II report
     housing project,

635. CMHC, (0), , Housing market intelligence study of Japan
     housing market,

636. CMHC, (1998), , Study of factory-built housing market opportunities in south eastern USA
     housing market, prefabricate buildings, manufactured housing,

637. CMHC, (2000), , CMHC's Best Practice Guides
     envelope design,

638. CMHC, (1991), , CMHC research project - testing of air barriers construction details
     air barrier, HAM: theory and modelling,

639. CMHC, (1998), , A Better Way to Renovate
     renovation, repair, maintenance,

640. CMHC, (0), , Solving persistent moisture problems and moisture damage
     BC leaky condos, moisture damages and problems for buildings,

641. CMHC, (1998), , Gagliano announces federal aid for leaky condo owners in lower coastal B.C
     BC leaky condos, building: condo / condominium,

642. CMHC, (1900), , Moisture and Air: Problems and Remedies. A Householder's Guide Renovator's Technical Guide
     fungi: remediation, treatment, prevention, moisture damages and problems for buildings,

643. CMHC, (2009), , The Northern Sustainable House: An Innovative Design Process

644. CMHC, (2001), , Building failures study

645. Cohen, Milstein, Hausfeld & Toll's, (1998), , Synthetic stucco (EIFS) settlement will provide up to $20 million for homeowners nationwide
     EIFS damage, envelope damage, envelope damage, fungi: legal, law, litigation, insurance issues,

646. Cohen, Milstein, Hausfeld & Toll's, (1999), , Tentative settlement of EIFS class action with parex announced
     EIFS damage, fungi: legal, law, litigation, insurance issues,

647. Cole, R. J., (1998), , Emerging trends in building environmental assessment methods
     envelope design,

648. Cole, R.J, (2001), , Lessons learned, future directions and issues for GBC
     sustainability, environment,

649. Coleman, H. W., Steele, W. G., (1995), , Engineering application of experimental uncertainty analysis
     mathematics: error analysis, uncertainty analysis,

650. Colomban, M., (1997), , The wall of the future, Key not speech
     envelope,

651. Commission on Engineering and Technical Systems (CETS), (1999), , Review of the need for a large-scale test facility for research on the effects of extreme winds on structures
     wind,

652. Committee on Advancing the Competitiveness and Productivity of the U.S. Construction Industry, National Research Council, (2009), , Advancing the Competitiveness and Efficiency of the U.S. Construction Industry
     energy efficiency,

653. Committee on Environmental Health, (1998), , Toxic effects of indoor molds
     fungi: health effects,

654. Committee on Partnerships for Emerging Research Institutions, (2009), , Partnerships for Emerging Research Institutions: Report of a Workshop

655. COMSOL, (2003), , FEMLAB Version 2.3, Reference manual
     CFD - computational fluid dynamics,

656. Connell, C. P., (0), , Health Effects of Moulds (Molds): State of Knowledge
     fungi: health effects,

657. Construction, D., (2001), , Prefab in UK -2001

658. Cooley, J.D, Wong, W.C, Jumper, C.A, Straus, D.C, (1998), , Correlation between the prevalence of certain fungi and sick building syndrome
     fungi: indoor biocontamination -- health symptom, IAQ: sick building syndrome, SBS,

659. Cooper, L. Y., (1989), , Calculation of the flow through a horizontal ceiling/floor vent,
     buoyancy air flow,

660. Cooperative Extension Service - Clemson University, (1991), , Biodeterioration of wood in houses
     biodeterioration, building: residential, house, home, fungi and molds in buildings and their envelopes,

661. Coquilla, R. V., (2009), , Review of Anemometer Calibration Standards

662. Corbin, C. D. and Zhai, Z. J., (2010), , Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic¨Cthermal col
     BIPV, PV/T,

663. Cordeau, S. and Barrington, S., (2011), , Performance of unglazed solar ventilation air pre-heaters for broiler barns,

664. Cornick, C., Dalgliesh, S. D. and Alan, W., (2009), , Adapting rain data for hygrothermal models
     HAM: material properties, rain penetration, water intrusion,

665. Cornick, S. and Dalgliesh, W. A., (2003), , A moisture index to characterize climates for building envelope design
     weather data and issues, weather, climates,

666. Cornick, S. M., Chown, G. A., Dalgliesh, W. A., Djebbar, R., Lacasse, M. A., Nofal, M., Said, M. N., Swinton, M. C. and Tariku, F., (2001), , Defining climate regions as a basis for specifying requirements for precipitation protection for walls
     load on building envelope, weather data and issues,

667. Cornick, S. M., Kumaran, M. K., (2008), , A comparison of empirical indoor relative humidity models with measured data
     Whole building HAM,

668. Cornick, S., Dalgliesh, A., Said, N., Djebbar, R., Tariku, F. and Kumaran, M. K., (2002), , Report from Task 4 of MEWS Project - Environmental Conditions, Final Report
     envelope performance, load on building envelope, Resource: institutes, organization, associations,

669. Cornick, S.M, (2001), , Climate loads and their effect on building envelopes - an overview
     surveys, reviews, statistics, weather, climates,

670. Corrado, C., Leow, S. W., Osborn, M., Chan, E., Balaban, B. and Carter, S. A., (2013), , Optimization of gain and energy conversion efficiency using front-facing photovoltaic cell luminescent solar concentratordesign

671. Corsi, M., (2000), , Evaluation of the potential impact of electrochromic windows on the energy performance of commercial buildings
     energy, Fazio's student: thesis, technology,

672. Costanza, R., (2008), , Ecosystem services: Multiple classification systems are needed

673. Costanza, R. and Daly, H.E., (2003), , Natural Capital and Sustainable Development

674. Costanza, R. et al., (1997), , The value of the world's ecosystem services and natural capital

675. Courville, G. E., Hylton, J. O., Murray, W. P., Blalock, A., and Remenyik, C. J., (1996), , Electric field probes for quantitative moisture measurements in building materials
     measurement: moisture content,

676. Couvillion, R. J. and Hawisa, J. S., (1993), , Heat and moisture transport with internal condensation in a fibrous insulation slab with impermeable boundary
     condensation and evaporation,

677. Couvillion, R.J. , J.S. Hawisa, and G.J. Tatge, (1992), , Apparatus for studying transient heat and moisture transfer in fiberglass batt insulation
     HAM: theory and modelling, insulation,

678. Cowan, P., (2001), , Learn to eliminate mould
     fungi: remediation, treatment, prevention,

679. Craner, J., (2001), , Building-related illness in occupants of mold-contaminated houses: a case series
     fungi: damp house -- health,

680. Craner, J., Linda, M. P. H., Stetzenbach, D., (2001), , Diagnosing the cause of a "sick building:" a case study of an epidemiological and microbiological investigation
     fungi: damp house -- health, fungi: health effects, IAQ: sick building syndrome, SBS,

681. Crawford, D.M. and Clausen, C.A, (1999), , Evaluation of wood treated with copper-based preservatives for Cu loss during exposure to heat and copper-tolerant Bacillus licheniformis
     fungi: preservatives against fungi growth and mold decay, wood, lumber, timber,

682. Crawley, D. and Aho, I., Hinks, J. and Cook, G., (1999), , Building environmental assessment methods: applications and development trends
     embodied energy, environmental impacts and issues, greenhouse gas emissions,

683. Crawley, D. B., Hand, J. W., Kummert, M. and Griffith, B. T., (2008), , Contrasting the capabilities of building energy performance simulation programs
     simulation of building process,

684. Crawley, D. B., Lawrie, L. K., Winkelmann, F. C., Buhl, W. F., Huang, Y. J., Pedersen, C. O., Strand, R. K., Liesen, R. J., Fisher, D. E., Witte, M. J. and Glazer, J., (2001), , EnergyPlus: creating a new-generation building energy simulation program

685. Cross, w. H., (2001), , Microbial contamination litigation: expert witnesses and scientific evidence
     fungi: damage to buildings, fungi: legal, law, litigation, insurance issues,

686. Crowther, D., T. Oreszczyn, S. Pretlove, I. Ridley, J. Horwood, P. Cox and B. Leung, (2001), , Controlling house dust mites through ventilation: the development of a model of mite response to varying hygrothermal conditions
     biodeterioration, building subsystems: HVAC, material properties: hygrothermal, ventilation - Air Infiltration and Ventilation in Buildings,

687. CSA, (1990), , CANICSA A440-M90 Windows, A national standard of Canada
     standards for windows, standards: CSA, standards: CSA,

688. CSA, (1994), , O86.1-94 Engineering Design in Wood (Limit States Design)
     National Building Code (NBC) of Canada, OSB - Oriented strandboard, standards: CSA, wind,

689. Cucchiella, F., D’Adamo, I., Gastaldi, M. and Koh, S. C. L., (2012), , Renewable energy options for buildings: Performance evaluations of integrated photovoltaic systems

690. Cuevas, C., Fissore, A. and Fonseca, N., (2010), , Natural convection at an indoor glazing surface with different window blinds

691. Cummings, J. B. and Withers, C. R., (1998), , Building cavities used as ducts: air leakage characteristics and impacts in light commercial buildings
     ventilation: mechanical systems (HVAC),

692. Cummings, J. B., Fairey, P. W., Withers, C. R. J., Mckendry, B. B. and Moyer, N. A., (1996), , Field measurement of uncontrolled airflow and depressurization in restaurants
     experiment: field testing and monitoring programs, ventilation: airtightness, air leakage,,

693. Cunningham, M. J., (1994), , Using hygroscopic damping of relative humidity and vapour pressure fluctuations to measure room ventilation rates
     ventilation: infiltration of buildings, Whole building HAM: humidity level in houses, Whole building HAM: models,

694. Cunningham, M. J., (1996), , Modelling of Moisture Transfer in Structures-III. A Comparison between the Numerical Model SMAHT and Field Data
     validation of models,

695. Cunningham, M. J., (2003), , The building volume with hygroscopic materials--an analytical study of a classical building physics problem
     building,

696. Cunningham, M. J., (2001), , Inferring ventilation and moisture release rates from field psychrometric data only using system identification techniques
     measurement and instrumentation, ventilation: measurement,

697. Cunningham, M. J., (1992), , Effective penetration depth and effective resistance in moisture transfer

698. Cunningham, M. J., Roos, C., Gu, L. and Spolek, G., (2004), , Predicting psychrometric conditions in biocontaminant microenvironments with a microclimate heat and moisture transfer model - description and field comparison
     Whole building HAM: theory and modeling,

699. Cunningham, M.J., M.R. Bassett, D. McQuade, and M. Beckett, (1994), , A field study of the moisture performance of roofs of occupied newly constructed timber framed houses
     envelope performance, experiment: field testing and monitoring programs, roof, wood frame houses and walls, wood structure,

700. Cunninghama, M. J., (1988), , The moisture performance of framed structures - A mathematical model
     HAM: simplified models - analytical methods, wood frame houses and walls, wood structure,

701. Curcija, D., (0), , Role of computer simulation in window certification
     building codes and standards, building: simulation of building processes, windows, doors, fenestration,

702. Curling, S. F. and Murphy, R. J., (1999), , The effect of artificial ageing on the durability of wood-based board materials against basidiomycete decay fungi

703. Currie, M. J., Mapel, J. K., Heidel, T. D. and Baldo?, S. G. a. M. A., (2008), , High-Efficiency Organic Solar Concentrators for Photovoltaics

704. Curtis, L., Allan stark, M. and William vetter, M., (2004), , Adverse health effects of indoor molds
     fungi: health effects,

705. Curtis, L., Ross, M., Persky, V., Scheff, P., Wadden, R., Ramakrisnan, V. and Hryhorczuk, D., (2000), , Bioaerosol concentrations in the quad cities 1 year after the 1993 Mississippi river floods
     fungi: damage to buildings, fungi: molds in buildings,

706. Cust¨®dio, J., Broughton, J. and Cruz, H., (2009), , A review of factors influencing the durability of structural bonded timber joints

707. Cvetnic, Z. and Pepeljnjak, S., (1997), , Distribution and mycotoxin-producing ability of some fungal isolates from the air
     fungi: components and products,

708. CWC, (1995), , Environmental effects of building materials; wood the renewable resource
     environmental impacts and issues, material, Renewable energy,

709. CWC, (2000), , Moisture and wood-frame buildings
     envelope components, wood frame houses and walls, wood structure,

710. CWC, (1999), , Design and costing workbook a guide to single storey commercial wood structures
     design, economical requirement of building envelope,

711. CWC, (2002), , Thermal performance of light-frame assemblies, DESIGN AND COSTING WORKBOOK A guide to single storey commercial wood structures
     envelope, wood frame houses and walls, wood structure,

712. D. Gorlo, L. Wolska, B. Zygmunt, J. Namiehik, (1997), , Calibration procedure for solid phase microextraction - gas chromatographic analysis of organic vapours in air
     measurement: SPME,

713. da_Graca, G. C., Augusto, A. and Lerer, M. M., (2012), , Solar powered net zero energy houses for southern Europe: Feasibility study

714. Daghigh, R., Ruslan, M. H. and Sopian, K., (2011), , Advances in liquid based photovoltaic/thermal (PV/T) collectors
     PV/T,

715. Dahl, S. D., Kuehn, T. H., Ramsey, J. W. and Yang, C., (1996), , Moisture storage and non-isothermal transport properties of common building materials
     Isotherm,

716. Dai, G. and Ahmet, K., (1998), , Moisture monitoring system based on a remote moisture sensor
     numerical method in heat and moisture transfer,

717. Dai, G. and Ahmet, K., (1999), , Mathematical modelling of sorption processes in timber based on numerical analysis mathematical modelling
     numerical method in heat and moisture transfer, sorption process: mathematical model, wood, lumber, timber,

718. Dalal, R., Naylor, D. and Roeleveld, D., (2009), , A CFD study of convection in a double glazed window with an enclosed pleated blind

719. Dales, R. E., Burnett, R., and Zwanenburg, H., (1991), , Adverse health effects in adults exposed to home dampness and molds
     fungi: health effects,

720. Dales, R.E., Miller, D., (1999), , Residential fungal contamination and health: Microbial cohabitants as covariates
     fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations,

721. Dalgliesh, W. A. and D. W. Boyd, (1962), , Wind on Buildings
     wind,

722. Dalgliesh, W. A., Surry, D., (2003), , BLWT, CFD and HAM modelling vs. the real world: bridging the gaps with full-scale measurements
     experiments and testing, HAM: theory and modelling, wind induced pressure on building, WRB weather-resistive barrier, house wrap,

723. Damery, D. T. and Fisette, P., (2001), , Decision making in the purchase of siding: a survey of architects, contractors, and homeowners in the U.S. Northeast
     cladding, siding, veneer, wood: engineered products,

724. Danese, M., Dem?ar, U., Masini, N. and Charlton, M., (2010), , Investigating material decay of historic buildings using visual analytics with multi-temporal infrared thermographic data

725. Datcu, S., Ibos, L., Candau, Y. and Mattei, S., (2005), , Improvement of building wall surface temperature measurements by infrared thermography

726. Date, A., Date, A., Dixon, C. and Akbarzadeh, A., (2014), , Progress of thermoelectric power generation systems: Prospect for small to medium scale power generation

727. Davidson, C. I., Tang, W., Finger, S., Etyemezian, V., Striegel, M. F. and Sherwood, S. I., (2000), , Soiling patterns on a tall limestone building: changes over 60 years
     Fa?ade wetting, water runoff, soiling,

728. Davidsson, H., Perers, B. and Karlsson, B., (2012), , System analysis of a multifunctional PV/T hybrid solar window

729. Davies, M. G., (1995), , Solutions to Fourier's equation and unsteady heat flow through structures
     measurement: thermal properties,

730. Davies, M., Martin, C., Watson, M. and Riain, C., (2005), , The development of an accurate tool to determine convective heat transfer coefficients in real buildings
     thermal analysis and performance,

731. Davies, R., Summerbell, R. C., Haldane, D., Dufour, A., Yu, K., Broder, I., Dales, R., Kirkbride, J., Kauri, T. and Robertson, W., (1995), , Fungal contamination in public buildings: a guide to recognition and management
     fungi and molds in buildings and their envelopes, fungi: aerobiology, dispersion of spores,, fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations, fungi: molds in buildings, fungi: mycology studies, culturing, fungi: remediation, treatment, prevention, fungi: spore, aerosol,

732. Davis, M. W. and Lamar, R. T., (1992), , Evaluation of methods to extract ergosterol for quantitation of soil fungal biomass
     fungi: assessment, sampling and analysis,

733. Davis, M. W., Fanney, A. H. and Dougherty, B. P., (2001), , Prediction of Building Integrated Photovoltaic Cell Temperatures

734. Davison, M., J. Persmann, and J. Reid, (0), , Green building materials residence, a WATgreen / ERS 285 study
     building: residential, house, home, Education, training, green building materials, green building project, sustainability, environment,

735. Dawson, P. C., (2004), , An Examination of the Use of Domestic Space by Inuit Families Living in Arviat, Nunavut

736. de Dear, R.J. and G. S. Bragerb, (2002), , Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55
     standards discussion, Standards: ASHRAE, thermal comfort,

737. De Freitas, V. P. Abrantes, V. Crausset, P., (1996), , Moisture migration in building walls - analysis of the interface phenomena
     HAM: theory and modelling, measurement: moisture content,

738. De Vries, D. A., (1987), , The theory of heat and moisture transfer in porous media revisited
     HAM: theory and modelling, mathematics: error analysis, uncertainty analysis, moisture transport in porous materials,

739. de Wilde, P., Augenbroea, A. and van der Voorden, M., (2002), , Design analysis integration: supporting the selection of energy saving building components
     envelope design,

740. de Wit, S. and Augenbroec, G., (2002), , Analysis of uncertainty in building design evaluations and its implications
     design, mathematics: error analysis, uncertainty analysis,

741. de_Barros, R. A., Martins, C. R. and Azevedo, W. M., (2005), , Writing with conducting polymer
     material,

742. Deakin, M., P. Huovila, S.l. Rao, M. Sunikka and R. Vreeker, (2001), , The assessment of sustainable urban development
     construction industry, sustainability, environment,

743. Deal, B., (2001), , Ecological urban dynamics: the convergence of spatial modelling and sustainability
     built environment, sustainability, environment,

744. Decamps, E., A., Royer, G., Queneudec, M. and J. R. Givri, (1995), , The influence of various condensation phenomena on the indoor cooling by cold walls radiation technique: the case of quality of air
     condensation and evaporation, solar energy, radiation,

745. Deering, A., (2001), , Beyond sick building syndrome: mold litigation enters the main stream
     fungi: molds in buildings, IAQ: sick building syndrome, SBS,

746. Degroot, M. W., Elowe, P. R., Wilbur, J., George, J. and Feist, R., (2009), , High throughput methodology for evaluation of the moisture barrier performance of thin films for PV applications

747. Delgado, J. M. P. Q., Ramos, N. M. M., Freitas, V. P., (2006), , Can moisture buffer performance be estimated from sorption kinetics?
     moisture in buildings,

748. Delisle, V. and Kummert, M., (2012), , Experimental Study to Characterize the Performance of Combined Photovoltaic/Thermal Air Collectors

749. Demharter, A., (1998), , Polyurethane rigid foam, a proven thermal insulating material for applications between +130ˇăC and ?196ˇăC

750. Denig, J., Wengert, E. M. and Simpson, W.T., (2000), , Drying hardwood lumber
     measurement: moisture content, wood, lumber, timber,

751. Depani, S., (1999), , A study on single blower door methods for multifamily buildings in Montreal (Quebec)
     Fazio's student: thesis, ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

752. Depani, S. and Fazio, P., (2001), , Airtightness testing and air flow modeling of two and three-unit multifamily buildings
     ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

753. Depani, S. and Fazio, P., (2005), , Airtightness testing of two- and three-unit buildings with a single fan
     experiment: field testing and monitoring programs, ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

754. Derluyn, H., Diepens,, Derome, D., West,, (2007), , Hygroscopic behavior of paper and books
     material properties: hygrothermal,

755. Derome, D., (2001), , The impact of sorption history and hysteresis on moisture pattern in a wood-framed building envelope
     HAM: theory and modelling, wood frame houses and walls, wood structure,

756. Derome, D., (2000), , Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope
     durability: building envelope, experiment: hygrothermal performance, Fazio's student: thesis, roof,

757. Derome, D. and Fazio, P., (1998), , Rapport Final Projet Site Internet - L'enveloppe du batiment et l'efficacit¨¦ ¨¦nerg¨¦tique
     experiment: facility on moisture in building envelope,

758. Derome, D. and Fazio, P., (1998), , Large scale testing of two flat roof assemblies insulated with cellulose
     experiment: facility on moisture in building envelope, experiment: hygrothermal performance, HAM: experimental work, insulation, roof,

759. Derome, D., Desmarais, G., Rao, J., Athienitis, A. and Fazio, P., (1997), , Study of the reduced impact of thermal bridges in two sprayed-applied polyurethane wall assemblies
     insulation, thermal bridge, wood frame houses and walls, wood structure,

760. Derome, D., Fazio, P., Desmarais, G., (2000), , Impact of added insulation on air leakage patterns
     insulation, ventilation: airtightness, air leakage,,

761. Derome, D., Fortin, Y. and Fazio, P., (2003), , Modeling of moisture behavior of wood planks in nonvented flat roofs
     HAM: theory and modelling,

762. Derome, D., Teasdale-St-Hilaire, A. and Fazio, P., (2001), , Methods for the assessment of moisture content of envelope assemblies
     measurement: moisture content, surveys, reviews, statistics,

763. Deroukakis, E., (2001), , Performance-based codes: impact on international trade
     market, trend, future, performance-based building codes and standards,

764. D¨¦senfant, M. and Priel, M., (2006), , Road map for measurement uncertainty evaluation
     mathematics: error analysis, uncertainty analysis,

765. Desjarlais, A. O., Christian, J. E. and Byars, N. A., (0), , Moisture control in low-slope roofing: a new design requirement
     moisture control, moisture management,

766. Desjarlais, A. O., Deroukakis, E., (1995), , Self-drying roofs: What? No dripping!
     roof,

767. Desjarlais, A. O., Petrie, T. W., Childs, P. W. and Atchley, J. A., (1998), , Moisture studies of a self-drying roof: tests in the large-scale climate simulator and results from thermal and hygric models
     HAM: application, HAM: experimental work,

768. Desjarlais, A.O., D.M. Kyle, P.W. Childs, and J.E. Christian, (1994), , Laboratory measurements of the drying rates of low-slope roofing systems
     drying potential of building envelope, experiment: facility on moisture in building envelope, roof,

769. Desjarlais, A.O., J.E. Christian, D.M. Kyle, and C. Rode, (1993), , Moisture: its effects on the thermal performance of a low-slope roof system
     roof,

770. Desmarais, G., (2000), , Impact of added insulation on the hygrothermal performance of leaky exterior wall assemblies
     experiment: hygrothermal performance, Fazio's student: thesis,

771. Desmarais, G., D. Derome and P. Fazio, (2001), , Moisture performance of leaky exterior walls with added insulation
     insulation, rain penetration, water intrusion,

772. Desmarais, G., Derome, D. and Fazio, P., (2000), , Mapping of air leakage in exterior wall assemblies
     drying potential of building envelope, ventilation: airtightness, air leakage,,

773. Desmarais, G., Derome, D., Athienitis, A. K. and Fazio, P., (1998), , Impact of air leakage pattern on reinsulated walls
     experiment: facility on moisture in building envelope, experiment: hygrothermal performance,

774. Desmarais, G., Derome, D., Fazio, P., (1998), , Experimental setup for the study of air leakage patterns
     experiment: facility on moisture in building envelope, experiment: hygrothermal performance, ventilation: airtightness, air leakage,,

775. Desmarais, G., Derome, D., Rao, J., Athienitis, A., and Fazio, P., (1997), , Comparaison de m¨¦thodes de mesure de flux de chaleur pour sp¨¦cimens de grandes et moyennes dimensions
     experiments and testing,

776. Dessel, S. V. and Foubert, B., (2010), , Active thermal insulators: Finite elements modeling and parametric study of thermoelectric modules integrated into a double pane glazing system
     PV/T,

777. Desta, T. Z., Baelmans, M. and Berckmans, D., (2008), , Behaviour of well-mixed zones (WMZs) in an imperfectly mixed ventilated room

778. Deuble, M. P. and Dear, R. J., (2012), , Green occupants for green buildings: The missing link?

779. Dewulf, J. and van Langenhove, H., (2002), , Analysis of volatile organic compounds using gas chromatography
     measurement: GC-MS, VOC: measurement and identification,

780. Dhaniyala, S., Liu, B. Y. H., (1999), , Investigations of particle penetration in fibrous filters: Part I. Experimental
     IAQ: particulate, dust,,

781. Dharmage, S., Bailey, M., Raven, J., Mitakakis, T., Cheng, A., Guest, D., Rolland, J., Forbes, A., Thien, F., Abramson, M. and Walters, E.H, (2001), , Current indoor allergen levels of fungi and cats, but not house dust mites, influence allergy and asthma in adults with high dust mite exposure
     fungi: moisture damaged house -- indoor microbial concentrations, IAQ: sick building syndrome, SBS,

782. Dharmage, S., Bailey, M., Raven, J., Mitakakis, T., Thien, F., Forbes, A., Guest, D., Abramson, M. and Walters, E.H, (1999), , Prevalence and residential determinants of fungi within homes in Melbourne, Australia
     fungi: health effects,

783. Dhayni, A., Mir, S., Rufer, L., Bounceur, A., (2006), , Pseudorandom functional BIST for linear and nonlinear MEMS
     mathematics,

784. Diaconu, B. M., (2011), , Thermal energy savings in buildings with PCM-enhanced envelope: Influence of occupancy pattern and ventilation

785. Diasty, R., Fazio, P. and Budaiwi, I., (1993), , The dynamic modelling of air humidity behaviour in a multi-zone space
     humidity on building performance,

786. Dickerhoff, S. M. H. D. J., (1989), , A Multigas Tracer System for Multizone Air Flow Measurements
     tracer gas method for measuring air exchange,

787. Dickson, A., (0), , Modelling Double-Skin Facades

788. Diederich, (2001), , How to find hidden microbial growth with a mold dog
     fungi: molds in buildings,

789. Di-giovanni, F. and Kevan, P. G., (1997), , Factors affecting pollen dynamics and its importance to pollen contamination: a review
     fungi: aerobiology, dispersion of spores,,

790. Dignard-bailey, L., Martel, S. and Ross, M. M. D., (0), , Photovoltaics for the north: a canadian program
     Housing research for the North, PV PV Photovoltaic,

791. Dill, M.J., (2000), , A review of testing for moisture in building elements
     experiments and testing, measurement: moisture content,

792. Dillon, H., (2009), , Benchmark comparison of natural convection in a tall cavity

793. Dillon, H. K., Miller, J. D., Sorenson, W. G., Douwes, J. and Jacobs, R. R., (1999), , Review of methods applicable to the assessment of mold exposure to children
     fungi: assessment, sampling and analysis, fungi: exposure investigation,

794. Dillon, H.K., Heinsohn, P.A. and Miller, J.D. (eds), (1996), , Field guide for the determination of biological contaminants in environmental samples
     fungi: assessment, sampling and analysis,

795. Dimoudi, A. and Tompa, C., (2008), , Energy and environmental indicators related to construction of office buildings
     energy: calculation,

796. DIN, (0), , DIN 4108-7, Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance
     standards: European, ventilation: airtightness, air leakage,,

797. Dincer, I., M.M. Hussain, A.Z. Sahin, B.S. Yilbas, (2002), , Development of a new moisture transfer (Bi--Re) correlation for food drying applications
     HAM: theory and modelling, HAM: theory and modelling,

798. Ding, G. K. C., (2005), , Developing a multicriteria approach for the measurement of sustainable performance
     sustainability, environment,

799. Ding, G. K. C., (2008), , Sustainable construction--The role of environmental assessment tools

800. Djebbar, R., Kumaran, M. K., Reenen, V. and Tariku, F., (2002), , Use of hygrothermal numerical modeling to identify optimal retrofit options for high-rise buildings
     HAM: application,

801. Djebbar, R., Reenen, v. and Kumaran, M. K., (2001), , Indoor and outdoor weather analysis tool for hygrothermal modelling
     load on building envelope, weather data and issues,

802. Djebbar, R., van Reenen, D. and Kumaran, M.K, (2001), , Environmental boundary conditions for long-term hygrothermal calculations
     HAM: theory and modelling, weather data and issues, weather, climates, weather, climates,

803. Djongyang, N., Tchinda, R. and Njomo, D., (2009), , A study of coupled heat and mass transfer across a porous building component in intertropical conditions
     HAM: theory and modelling,

804. Djongyanga, N., b, R. T. and Njomoa, D., (2010), , Thermal comfort: A review paper

805. Djunaedy, E., (2005), , External coupling between building energy simulation and computational fluid dynamics
     simulation of building process,

806. DMO Associates, (1999), , Drying of walls with ventilated stucco cladding parametric analysis
     capillary break, cladding, siding, veneer, drying potential of building envelope, mathematics,

807. DoD, (2002), , Unified facilities criteria (UFC), design: general building
     building codes and standards, country: US,

808. Dodson, R. E., Levy, J. I., Shine, J. P., Spengler, J. D. and Bennett, D. H., (2007), , Multi-zonal air flow rates in residences in Boston
     ventilation: measurement,

809. DOE, (2001), , Building envelope technology roadmap: a 20-year industry plan for building envelopes
     economical requirement of building envelope, energy efficiency, housing market,

810. DOE, (2001), , Vision 2020: a lighting technology roadmap
     lighting, daylighting, market, trend, future,

811. DOE, (2001), , Window industry technology roadmap
     country: US, market, trend, future, windows, doors, fenestration,

812. DOE, (2001), , High-performance commercial buildings - a technology roadmap
     building: commercial, office, market, trend, future,

813. DOE, (0), , Before You Design, Build Or Renovate. Healthy and Affordable Housing:practical Recommendations for Building, Renovating and Maintaining Housing
     design,

814. Doll, S.C. and H.A. Burge, (2001), , Characterization of fungi occurring on "new" gypsum wallboard
     envelope materials, experiment: mycology study, fungi: molds in buildings,

815. Dominguez, A., Kleissl, J. and Luvall, J. C., (2011), , Effects of solar photovoltaic panels on roof heat transfer

816. D?rge, T., Carstensen, J. M. and Frisvad, J.C., (2000), , Direct identification of pure Penicillium species using image analysis
     fungi: assessment, sampling and analysis,

817. Dos_Santos, G.H.D. and Mendes, N., (2009), , Heat, air and moisture transfer through hollow porous blocks
     HAM: theory and modelling,

818. D'ottavio, T. W., Senum, G. I. and Dietz, R. N., (1988), , Error analysis techniques for perfluorocarbon tracer derived multizone ventilation rates
     mathematics: error analysis, uncertainty analysis, ventilation: measurement,

819. Douglas, J. and Stirling, J. S., (1997), , Dampness in buildings, 2nd ED
     construction industry, envelope, moisture in buildings, moisture source for building envelope,

820. Douwes, J., van der Sluis, B., Doekes, G., van Leusden, F., Wijnands, L., van Strien, R., Verhoeff, A. and Brunekreef, B., (1999), , Fungal extracellular polysaccharides in house dust as a marker for exposure to fungi: Relations with culturable fungi, reported home dampness, and respiratory symptoms
     fungi: moisture damaged house -- indoor microbial concentrations,

821. Drchalova, J., Pavlik, Z. and Cerny, R., (2002), , A comparison of various techniques for determination of moisture diffusivity from moisture profiles
     liquid transport, moisture diffusivity, measurement: hygrothermal properties, measurement: moisture content, surveys, reviews, statistics,

822. DRM International, (2003), , A Review of Manufactured Housing Installation Standards and Instructions

823. Drobnik, A., Rozniakowski, K. and Wojtatowicz, T. W., (1995), , Contactless investigation of porous materials with the aid of He-Ne laser radiation
     measurement: laser, measurement: moisture content,

824. Drogemuller, R., Ambrose, M. and Tucker, S., (0), , Automating building life cycle energy assesment
     embodied energy, life cycle assessment (LCA),

825. Drummond, A. J., (1963), , Instrumentation for the measurement of solar radiation - A survey of modern techniques and recent developments

826. Drysdale, R. G. and Michael J., (1997), , Full scale tests of brick veneer steel stud walls - strength and rain penetration
     brick, masonry, mortar, experiments and testing, rain penetration, water intrusion, structure aspect, strength and rigidity of building envelope,

827. Drysdale, R.G, (1990), , Construction problems in multi-family residential buildings
     building: condo / condominium, building: residential, house, home, construction industry, moisture in buildings,

828. Duchaine, C. and M¨¦riaux, A., (2001), , The importance of combining air sampling and surface analysis when studying problematic houses for mold biodiversity determination
     fungi: assessment, sampling and analysis,

829. Duchaine, C., Grimard, Y. and Cormier, Y., (2000), , Influence of building maintenance, environmental factors, and seasons on airborne contaminants of swine confinement buildings.
     fungi: molds in buildings, maintenance, inspection, and diagnose,

830. Duffie J. and Beckmann W. , (2013), , Solar engineering of thermal processes, 4ED

831. Dufoura, M. B., Deromeb, D. and Zmeureanua, R., (2009), , Analysis of thermograms for the estimation of dimensions of cracks in building envelope

832. Dulaimi, M.F., Ling, F., Ofori, G. and De Silva, N., (2002), , Enhancing integration and innovation in construction
     country: other,

833. Dumas, J. P., Gibout, S., C¨¦zac, P., Franquet, E. and Haillot, D., (2013), , Model for the DSC thermograms of the melting of ideal binary solutions

834. Dumas, J., Gibout, S., Zalewski, L., Johannes, K., Franquet, E., Lassue, S., Bedecarrats, J., Tittelein, P. and Kuznik, F., (2014), , Interpretation of calorimetry experiments to characterise phase change materials

835. Duncan, J. R., Hui, S. C. M., Hui, S. C. M., (1999), , An International Agenda for Research
     market, trend, future, performance-based building codes and standards, research, funding, Zero Energy Building: ZEB,

836. Duncheskie, D., Coleman, J. and Oddo, V., (1998), , Walls and Infrastructure
     envelope, envelope design, envelope requirements,

837. Dutil, Y., Rousse, D. R., Salah, N. B., Lassue, S. and Zalewski, L., (2011), , A review on phase-change materials: Mathematical modeling and simulations

838. Dutil, Y., Rousse, D., Lassue, S., Zalewski, L., Joulin, A., Virgone, J., Kuznik, F., Johannes, K., Dumas, J., B¨¦d¨¦carrats, J., Castell, A. and Cabeza, L. F., (2014), , Modeling phase change materials behavior in building applications: Comments on material characterization and model validation

839. Dyrbol, S., Svendsen, S. and Elmroth, A., (2002), , Experimental investigation of the effect of natural convection on heat transfer in mineral wool
     insulation, ventilation: infiltration of buildings,

840. Eames, I. W., Marr, N. J. and Sabir, H., (1997), , Evaporation coefficient of water: a review
     condensation and evaporation,

841. Eames, P. C., (2008), , Vacuum glazing: Current performance and future prospects
     curtain wall,

842. Ebbehoj, N. E., Hansen, M. O., Sigsgaard, T. and Larsen, L., (2002), , Building-related symptoms and molds: a two-step intervention study
     fungi: health effects,

843. Ebbeh?j, N., Svensson, H. W. M., Valbj?rn, O. and the DAMIB-group, (2002), , Lung function and symptoms in damp and mouldy buildings
     fungi: health effects,

844. ECEEE, (2009), , Steering through the maze # 2: Net zero energy buildings: definitions, issues and experience

845. Eckhardt, F. E. W., (1994), , Microbial VARIETY of materials-simulation, case histories, and countermeasures: microbial variety on materials and means of contamination
     fungi: molds in buildings,

846. Editorial, (2002), , Current state and future issues of building and environmental performance simulation a the start of the 3rd millennium
     building: simulation of building processes, simulation of building process, surveys, reviews, statistics,

847. Eeig, P., (1995), , In-situ measurement of the thermal resistance and thermal transmittance
     measurement: thermal properties,

848. Efstathiades, , Baniotopoulos, C. C., Nazarko, P., Ziemianski, L. and Stavroulakis, G. E., (2007), , Application of neural networks for the structural health monitoring in curtain-wall systems
     curtain wall,

849. Egan, J., (1998), , Rethinking construction: the report of the construction task force
     construction industry, market, trend, future, research, funding,

850. Eggleston, P. A., (2003), , Environmental control for fungal allergen exposure
     fungi: exposure investigation,

851. Eiffert, P., (2003), , Guidelines for the Economic Evaluation of Building-Integrated Photovoltaic Power Systems
     BIPV, PV/T,

852. Eiffert, P. and Kiss D. J., (2000), , Building-Integrated Photovoltaic Designs for Commercial and Institutional Structures - A Sourcebook for Architects
     BIPV,

853. Einberg, G., (2005), , Air diffusion and solid contaminant behaviour in room ventilation -- a CFD based integrated approach
     IAQ: CFD, IAQ: CFD, IAQ: particulate, dust,, Indoor air movement-CFD,

854. Eisenberg, D., (1997), , Sustainability and the building codes
     building codes and standards, built environment,

855. Eisert, R. and Pawliszyn, J., (1997), , New trends in solid-phase microextraction
     measurement: SPME,

856. Eke, R. and Senturk, A., (2013), , Monitoring the performance of single and triple junction amorphous silicon modules in two building integrated photovoltaic (BIPV) installations

857. El Diasty, R., P. Fazio and I. Budaiwi, (1992), , Modelling of indoor air humidity: the dynamic behaviour within an enclosure
     humidity on building performance, Whole building HAM: humidity level in houses, Whole building HAM: models,

858. El-Diasty, R., (1983), , An Investigation of Window Systems for Reduced Energy Consumption
     Fazio's student: thesis,

859. El-Hakim, N., (1981), , Diaphragm-Action of Asbestos Cement Decks
     Fazio's student: thesis,

860. Elke, K., Begerow, J., Oppermann, H., Kr?mer, U., Jermann, E. and Dunemann, L., (1999), , Determination of selected microbial volatile organic compounds by diffusive sampling and dual-column capillary GC-FID--a new feasible approach for the detection of an exposure to indoor mould fungi?
     fungi: MVOC - microbial volatile organic compound, measurement: GC-MS, VOC: measurement and identification,

861. Ellis, M. W. and Mathews, E. H., (2002), , Needs and trends in building and HVAC system desgin tools
     building subsystems: HVAC, ventilation - Air Infiltration and Ventilation in Buildings,

862. Ellringer, J., Boone, K. and Hendrickson, S., (2000), , Building materials used in construction can affect indoor fungal levels greatly
     envelope materials,

863. Elmahdy, A.H. and A. Patenaude, (1988), , The system approach to window performance standards
     building codes and standards, curtain wall, standards for windows, standards: CSA, windows, doors, fenestration,

864. El-rayes, K. and Moselhi, O., (1998), , Resource-driven scheduling of repetitive activities
     construction management,

865. El-rayes, K., Ramanathan, R. and Moselhi, O., (2002), , An object-oriented model for planning and control of housing construction
     construction management,

866. El-sawi, A., Haghighat, F. and Akbari, H., (2014), , Assessing long-term performance of centralized thermal energy storage system

867. El-sawi, A., Haghighat, F. and Akbari, H., (2013), , Centralized latent heat thermal energy storage system: Model development and validation

868. El-Shimi, M., White, R. and Fazio, P., (1980), , Influence of facade geometry on weathering
     Fa?ade wetting, water runoff, soiling, rain, wind driven rain,

869. Emmerich, S. J., Persily, A. K. and Nabinger, S. J., (2002), , Modeling moisture in residential buildings with a multizone IAQ program
     moisture in buildings,

870. Emmerich, S.J., (2001), , Validation of multizone IAQ modeling of residential-scale buildings: a review
     IAQ - indoor air quality,

871. EN, (2012), , A guide to the Standard EN12975

872. Engeland, J., Lewis, R. and Ehrlich, S., (2004), , Evolving housing conditions in Canada's census metropolitan areas, 1991-2001
     country: Canada, market, trend, future,

873. Engelhart, S. and Exner, M., (2002), , Fungi in indoor air - Determination of mesophilic and thermo-tolerant fungi in indoor air using occupational standards on bioaerosols
     fungi: moisture damaged house -- indoor microbial concentrations,

874. Engelharta, S. and Exnera, M., (2002), , Short-term versus long-term filter cassette sampling for viable fungi in indoor air: comparative performance of the Sartorius MD

875. Engvall, K., Norrby, C. and Norback, D., (2001), , Sick building syndrome in relation to building dampness in multi-family residential buildings in Stockholm
     fungi: moisture damaged house -- indoor microbial concentrations, IAQ: sick building syndrome, SBS,

876. Engvall, K., Norrby, C., Bandel, J., Hult, M. and Norb?ck, D., (2000), , Development of a multiple regression model to identify multi-Family residential buildings with a high prevalence of sick building syndrome (SBS)
     experiment: survey and questionnaire, IAQ: sick building syndrome, SBS, mathematics: regression analysis / fitting,

877. Environment Canada, (1995), , National Action Program on Climate Change
     climate change, global warming,

878. EPA, (2001), , Mold remediation in schools and commercial buildings
     building: commercial, office, fungi: health effects, fungi: molds in buildings, fungi: remediation, treatment, prevention,

879. EPA, (2002), , A brief guide to mold, moisture, and your home
     fungi: damage to buildings, fungi: health effects, fungi: molds in buildings, guideline, moisture in buildings, Resource: institutes, organization, associations,

880. EPA, (1990), , Biological pollutants in your home
     building: residential, house, home, fungi: molds in buildings, guideline,

881. EPA, (1996), , Air quality criteria for particulate matter
     IAQ: particulate, dust,,

882. EPA, (2003), , A standarized EPA protocol for characterizing indoor air quality in large office buildings
     fungi: guideline,

883. Eriksson B. and Westberg, K., (1999), , Model to transform measured climatic data from a local level to a micro level: temperatures model to transform climatic data
     weather, climates,

884. Erinjeri, J. J., Witriol, N. M., Katz, M., (2009), , Measurement of Return Leaks in Residential Buildings in North Louisiana

885. Erman, E., (2003), , Timber joint design: the geometric breakdown method
     envelope design, wood, lumber, timber,

886. Ernest, D. R., Bauman, F. S. and Arens, E. A., (1992), , The effects of external wind pressure distributions on wind-induced air motion inside buildings
     wind induced pressure on building,

887. Erriguible, A., Bernada, P., Coutur, F. and Roques, M., (2005), , Modeling of heat and mass transfer at the boundary between a porous medium and its surroundings
     material properties: hygrothermal,

888. Erriguible, A., Bernada, P., Couture, F. and Roques, M., (2006), , Simulation of convective drying of a porous medium with boundary conditions provided by CFD.
     CFD - computational fluid dynamics,

889. Eskinat, E., Johnson, S. H., Luyben, W. L., (2004), , Use of Hammerstein models in identification of nonlinear systems
     mathematics,

890. Esram, T. and Chapman, P. L., (2007), , Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques

891. Etheridge, D. and Sandberg, M., (1996), , Building ventilation: theory and measurement
     ventilation: measurement,

892. Etzel, R. A., Monta?a, E., Sorenson, W. G., Kullman, G. J., Allan, T. M., Dearborn, D. G., Olson, D. R., Jarvis, B. B. and Miller, J. D., (2000), , Acute pulmonary hemorrhage in infants associated with exposure to Stachybotrys atra and other fungi
     fungi: indoor biocontamination -- health symptom, fungi: Stachybotrys,

893. Evans, F. G. and Jacobsen, B., (2002), , A summary of the project for surface and system treatment
     fungi: remediation, treatment, prevention, wood, lumber, timber,

894. Evans, J., Hyndman, S., Stewart-Brown, S., Smith, D. and Petersen, S., (2000), , An epidemiological study of the relative importance of damp housing in relation to adult health
     fungi: health effects,

895. Evans, S. and Morey, P., (2002), , Construction defects and microbial growth
     fungi: moisture damaged house -- indoor microbial concentrations, fungi: molds in buildings,

896. Evola, G., Popov, V., (2006), , Computational analysis of wind driven natural ventilation in buildings
     ventilation: infiltration of buildings,

897. Ezeonu, I. M., Noble, J. A., Simmons, R. B., Price, D. L., Crow, S. A. and Ahearn, D. G., (1994), , Effect of relative humidity on fungal colonization of fiberglass insulation
     fungi: molds in buildings, insulation,

898. Ezeonu, I. M., Price, D. L., Simmons, R. B., Crow, S. A. and Ahearn, D. G., (1994), , Fungal production of volatiles during growth on fiberglass
     fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound, insulation,

899. Fabi, V., Andersen, R. V., Corgnati, S. and Olesen, B. W., (2012), , Occupants' window opening behaviour: A literature review of factors influencing occupant behaviour and models

900. Fabian, M. P., Reponen, T., Miller, S. L. and Hernandez, M. T., (2000), , Total and culturable airborne bacteria and fungi in arid region flood-damaged residences
     fungi: damage to buildings, fungi: molds in buildings,

901. Fairclough, J., (2002), , Rethinking construction innovation and research, a review of government R&D policies and practices
     construction industry, market, trend, future, research, funding,

902. Fan, J. and Wen, X., Johansson, P., Samuelson, I., Ekstrand-tobin, A., Mj?rnell, K., Sandberg, P. I. and Sikander, E., (2002), , Modeling heat and moisture transfer through fibrous insulation with phase change and mobile condensates
     HAM: theory and modelling, insulation, PV/T,

903. Fan, J., Cheng, X., Wen, X. and Sun, W., (2003), , An improved model of heat and moisture transfer with phase change and mobile condensates in fibrous insulation and comparison with experimental results
     HAM: theory and modelling, insulation,

904. Fan, J., Shah, L. J. and Furbo, S., (2007), , Flow distribution in a solar collector panel with horizontally inclined absorber strips

905. Fang, L., Clausen, G. and Fanger, P. O., (1998), , Impact of temperature and humidity on the perception of indoor air qualit
     IAQ - indoor air quality,

906. Fang, Y., Hyde, T., Eames, P. C. and Hewitt, N., (2009), , Theoretical and experimental analysis of the vacuum pressure in a vacuum glazing after extreme thermal cycling
     windows, doors, fenestration,

907. Fanger PO, Pedersen CJK, (1977), , Discomfort due to air velocities in spaces
     thermal comfort,

908. Fanger, P., (1970), , Thermal Comfort
     thermal comfort,

909. Fanger, P. O., (2000), , Indoor air quality in the 21st century: search for excellence
     IAQ: sick building syndrome, SBS, market, trend, future,

910. Fanger, P. O., Melikov, A. K., Hanzawa, H. and Ring, J., (1988), , Air turbulence and sensation of draught
     thermal comfort,

911. Fanney, A. H., Dougherty, B. P. and Davis, M. W., (2002), , Evaluating building integrated photovoltaic performance models
     BIPV,

912. Fanney, A. H., Saunders, C. A., and Hill, S. D., (1994), , Test procedures for advanced insulation panels
     advanced insulation,

913. Farhangnia, M., Biringen, S. and Peltier, L. J., (1996), , Numerical simulation of two-dimensional buoyancy-driven turbulence in a tall rectangular cavity
     buoyancy air flow,

914. Farid, M., Khudhair, A., Razack, S. A. and Al-hallaj, S., (2004), , A review on phase change energy storage: materials and applications

915. Farnsworth, C. B., (1999), , Health house cold climate standards keep occupants warm and dry
     housing project,

916. Favarolo, P. A. and Manz, H., (2005), , Temperature-driven single-sided ventilation through a large rectangular opening, review on wind driven ventilation techniques

917. Fazio, P., (1964), , Continuous folded plate structures under uniform load
     Fazio's student: thesis,

918. Fazio, P., (1968), , Folded sandwich plate structures
     Fazio's student: thesis,

919. Fazio, P. and Kontopidisa, T., (1988), , Cavity pressure in rain screen walls
     cavity wall, rainscreen, pressure equalized rainscreen principle,

920. Fazio, P. and Rizzo, S.J., (1979), , Nonlinear elastic analysis of panelized shear sandwich walls

921. Fazio, P., Alturkistani, A., Rao, J. and Mao, Q., (2009), , A new testing method to evaluate the relative drying performance of different building envelope systems using water trays

922. Fazio, P., Athienitis, A. K., Marsh, C. and Rao, J., (1994), , Design and construction of an environmental chamber facility
     experiment: facility on moisture in building envelope, HAM: experimental work,

923. Fazio, P., Athienitis, A., Marsh, C. and Rao, J., (1997), , Environmental chamber for investigation of building envelope performance
     envelope, envelope performance, experiment: facility on moisture in building envelope, experiments and testing,

924. Fazio, P., Athienitis, A.K., Stylianou, M., Zmeureanu, R. and Feldman, D., (1991), , A review of research activities in energy efficiency in buildings in Canada
     energy efficiency, surveys, reviews, statistics,

925. Fazio, P., Bartlett, K., Yang, D., Rao, J. and Miao, G., (2005), , Development of experimental procedure to evaluate potential movement of mold spores from wall cavity to indoor environment
     fungi and molds in buildings and their envelopes,

926. Fazio, P., D. Derome, A. Athienitis, and J. Rao, (1997), , Use of an environmental chamber to investigate large-scale envelope specimen hygrothermal performance
     HAM: experimental work,

927. Fazio, P., Derome, D. and Athienitis, A. K., (1998), , Essai sur les toits plats isol¨¦s ¨¤ la fibre de cellulose
     insulation,

928. Fazio, P., Derome, D. and Rao, J., (2001), , Review and framework for large-scale laboratory studies on wetting and drying of building envelopes
     design, envelope, experiment: facility on moisture in building envelope, experiment: laboratory, experiments and testing,

929. Fazio, P., Derome, D., Gebasi, D., Athienitis, A., Depani, S., Kovacevic, P., (1998), , Testing of flat roofs insulated with cellulose fiber
     insulation, roof, Whole building HAM: humidity level in houses,

930. Fazio, P., Ge, H., Rao, J. and Desmarais, G., (1999), , Building pressurisation can affect possibility of mould growth
     fungi: molds in buildings, ventilation: standards,

931. Fazio, P., Ge, H., Rao, J. and Desmarais, G. (Eds.), (2006), , Building Physics: 3rd International Conference in Building Physics
     building, built environment, envelope, simulation of building process,

932. Fazio, P., H. Ge, and J. Rao, (2001), , Measuring air leakage of full-scale curtain wall sections using a non-rigid air-chamber method
     curtain wall, experiment: facility on moisture in building envelope, mathematics: regression analysis / fitting, ventilation: airtightness, air leakage,,

933. Fazio, P., He, H. S., Hammad, A. and Horvat, M., (2007), , IFC-based framework for evaluating total performance of building envelopes
     envelope design,

934. Fazio, P., Mallidi, S.R. and Zhu, D., (1995), , A quantitative study for the measurement of driving rain exposure in the Montr¨¦al region
     Fa?ade wetting, water runoff, soiling,

935. Fazio, P., Mao, Q., Ge, H., Alturkistani, A. and Rao, J., (2007), , Test method to measure the relative capacity of wall panels to evacuate moisture from their stud cavity
     experiment: hygrothermal -- large scale laboratory testing, experiment: hygrothermal performance,

936. Fazio, P., Rao, J., and Ge, H., (2002), , Measuring air leakage characteristics with flexible double air chambers
     curtain wall, experiment: laboratory, measurement and instrumentation, ventilation: airtightness, air leakage,,

937. FCCC, (2001), , Input to the World Summit on Sustainable Development. Note by the secretariat
     climate change, global warming,

938. Federal Energy Management Program (U.S.), (1998), , Transpired Collectors (Solar Preheaters for Outdoor Ventilation Air) Simple, reliable technology can substantially reduce heating bills

939. Feldman, D., Stathopoulos, T., Cosmulescu, C. and Wu, H., Meadows D. H. , Meadows D. L. , Randers J. , Behrens III William W. , (1998), , A simple apparatus for the evaluation of air infiltration through building envelope components
     ventilation: infiltration of buildings,

940. Feng, J., Lian, Z., Hou, Z., (2008), , An innovation wall model based on interlayer ventilation

941. Fennell, H. C., (1998), , Case study - ice dam remediation for Northeast ski area condominiums
     building: condo / condominium, moisture damages and problems for buildings,

942. Fernandez, E., Cancela, N. and Olmedo, R., (2008), , Deriving a final ranking from fuzzy preferences: an approach compatible with the principle of correspondence
     mathematics,

943. Ferrero, A. and Salicone, S., (2003), , An innovative approach to the determination of uncertainty in measurements based on fuzzy variables
     mathematics: error analysis, uncertainty analysis,

944. Feustel, H. E., (1999), , COMIS-an international multizone -air-flow and contaminant transport model
     ventilation: infiltration of buildings,

945. Fiedler, K., Schutz, E. and Geh, S., (2001), , Detection of microbial volatile organic compounds (MVOCs) produced by moulds on various materials
     fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound, measurement: GC-MS, measurement: SPME,

946. Finch, G., (2007), , The performance of rainscreen walls in coastal British Columbia
     BC leaky condos, rain on walls, rain precipitation, rainscreen, pressure equalized rainscreen principle,

947. Finkelstein, L., (2009), , Widely-defined measurement - An analysis of challenges
     experiments and testing,

948. Finlay, J. A., Callow, M. E., Schultz, M. P., Swain, G. W. and Callow, J. A., (2002), , Adhesion strength of settled spores of the green alga enteromorpha
     fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

949. Fisch, M. N., Guigas, M. and Dalenb?ck, J. O., (1998), , A review of large-scale solar heating systems in europe

950. Fischer, G. and Dott, W., (2002), , Quality assurance and good laboratory practice in the mycological laboratory - compilation of basic techniques for the identification of fungi
     fungi: assessment, sampling and analysis, fungi: mycology studies, culturing,

951. Fischer, G., Muller, T., Schwalbe, R., Ostrowski, R. and Dott, W., (2000), , Species-specific profiles of mycotoxins produced in cultures and associated with conidia of airborne fungi derived from biowaste
     fungi: components and products, fungi: mycology studies, culturing,

952. Fischer, G., M¨ąller, T., Schwalbe, R., Ostrowski, R. and Dott, W., (2000), , Exposure to airborne fungi, MVOC and mycotoxins in biowaste-handling facilities
     fungi and molds in buildings and their envelopes, fungi: components and products, fungi: health effects, fungi: MVOC - microbial volatile organic compound, IAQ: sick building syndrome, SBS, VOC,

953. Fischer, G., Schwalbe, R., Moller, M., Ostrowski, R. and Dott, W., (1999), , Species-specific production of microbial volatile organic compounds (MVOC) by airborne fungi from a compost facility
     fungi: MVOC - microbial volatile organic compound, measurement: GC-MS, VOC,

954. Fischer, G., Schwalbe, R., Ostrowski, R. and Dott, W., (1998), , Airborne fungi and their secondary metabolites in working places in a compost facility
     fungi: mycology studies, culturing,

955. Fisette, P., (2000), , The evolution of engineered wood I-joists
     wood: engineered products,

956. Fisette, P., (1999), , Housewraps, felt paper and weather penetration barriers
     capillary break, WRB weather-resistive barrier, house wrap,

957. Fisette, P., (2000), , Decoding building codes
     building, building codes and standards, country: US, standards discussion,

958. Fisette, P., (1997), , Details that keep walls watertight
     rain penetration, water intrusion,

959. Fisette, P., (1997), , Choosing between oriented strandboard and plywood
     OSB - Oriented strandboard, wood panel,

960. Fisette, P., (1997), , Common failures in wood structures
     building: damage and failures, building: residential, house, home, wood frame houses and walls, wood structure,

961. Fisher, D. E. and Pedersen, C. O., (1997), , Convective heat transfer in building energy and thermal load calculations
     Indoor air movement-CFD,

962. Fisk W. and Rosenfeld A. , (1997), , Improved productivity and health from better indoor environments
     IAQ: Health,

963. Fitzgeralda, S. D. and Woodsa, A. W., (2007), , Transient natural ventilation of a room with a distributed heat source
     ventilation: infiltration of buildings,

964. Flannigan, B., (1997), , Air sampling for fungi in indoor environments
     fungi: components and products, fungi: spore, aerosol,

965. Flannigan, B., Samson, O. and Miller, J. D. (Ed.), (2001), , Microorganisms in home and indoor work environments
     fungi: assessment, sampling and analysis,

966. Fleck, B. A., Meier, R. M. and Matovi, M. D., (2002), , A field study of the wind effects on the performance of an unglazed transpired solar collector

967. Flor, F., Liss¨¦n, J. M. S. and Dom¨Şnguez, S.¨˘., (2006), , A new methodology towards determining building performance under modified outdoor conditions
     weather, climates,

968. Flores-Colen, I., Brito, J. and de_Freitas, V.P., (2008), , Stains in facades' rendering -- Diagnosis and maintenance techniques' classification
     Fa?ade wetting, water runoff, soiling,

969. Fluent Inc, (1998), , Fluent user's guide, Version 5.0,
     computer code, software,

970. Foarde, K. K., Osdell, V., Menetrez, D. W. and Chang, C. S., (1999), , Investigating the influence of relative humidity, air velocity and amplification on the emission rates of fungal spores
     fungi: aerobiology, dispersion of spores,,

971. Foarde, K. K., Vanosdell, D. W. and Chang, J. C. S., (1996), , Static chamber method for evaluating the ability of indoor materials to support microbial growth
     fungi: growth and growth model, fungi: guideline,

972. Fogel, J.L. and J. D. Lloyd, (2002), , Mold performance of some construction products with and without borates
     envelope materials, fungi and molds in buildings and their envelopes, insulation, wood panel,

973. Fokaides, P. A. and Papadopoulos, A. M., (2014), , Cost-optimal insulation thickness in dry and mesothermal climates: Existing models and their improvement

974. Foliente, G. C., (2000), , Developments in performance-based building codes and standards
     bacteria, objective-based codes, performance-based building codes and standards, surveys, reviews, statistics,

975. Ford, J. D., (2009), , Dangerous climate change and the importance of adaptation for the Arctic's Inuit population
     Housing research for the North,

976. Forest Products Laboratory, (1999), , Wood handbook - wood as an engineering material
     fungi and molds in buildings and their envelopes, measurement: moisture content, wood panel, wood, lumber, timber, wood: engineered products,

977. Forintek Canada Corporation, (2001), , Guidelines for on-site measurement of moisture in wood building materials
     experiment: field testing and monitoring programs, wood frame houses and walls, wood structure,

978. Fors¨¦n H., Tarvainen V., (2000), , Accuracy and functionality of hand held wood moisture content meters
     measurement: moisture content,

979. Foruk, M. J., Uhlman, S., Baker, D. B., Yang, H., (2001), , Analysis of microbial contamination of a ventilation system detected by measurement of microbial volatile organic compounds
     building subsystems: HVAC, fungi: MVOC - microbial volatile organic compound,

980. Fossa, M., Menezo, C. and Leonardi, E., (2008), , Experimental natural convection on vertical surfaces for building integrated photovoltaic (BIPV) applications
     BIPV, PV/T,

981. Foto, M., Vrijmoed, L. L. P., Miller, J. D., Ruest, K., Lawton, M. and Dales, R. E., (2005), , A comparison of airborne ergosterol, glucan and Air-O-Cell data in relation to physical assessments of mold damage and some other parameters
     fungi: assessment, sampling and analysis, fungi: moisture damaged house -- indoor microbial concentrations, fungi: spore, aerosol, moisture source for building envelope,

982. Foucquier, A., Robert, S., Suard, F., St¨¦phan, L. and Jay, A., (2013), , State of the art in building modelling and energy performances prediction: A review

983. Four Star Cleaning and Restoration, (2004), , Non Invasive Roof Leak Detection Using Infrared Thermography
     Infrared thermography (IRT),

984. Fradkin, A., Tobin, R. S., Tarlo, S. M., Tucic-porretta, M. and Malloch, D., (1987), , Species indentification of airborne molds and its significance for the detection of indoor pollution
     fungi: assessment, sampling and analysis,

985. Franck, U., Herbarth, O., Wehner, B., Wiedensohler, A. and Manjarrez, M., (2003), , How do the indoor size distributions of airborne submicron and ultrafine particles in the absence of significant indoor sources depend on outdoor distributions?
     IAQ: particulate, dust,, particle transport, penetration of particulate, through walls,

986. Franquet, E., Gibout, S., B¨¦d¨¦carrats, J., Haillot, D. and Dumas, J., (2012), , Inverse method for the identification of the enthalpy of phase change materials from calorimetry experiments

987. Frey, P. J. and Alauzet, F., (2005), , Anisotropic mesh adaptation for CFD computations
     CFD - computational fluid dynamics, Indoor air movement-CFD,

988. Freymuth, P, (1998), , On higher order dynamics of constant-temperature hot-wire anemometers
     measurement: anemometer, low air velocity in room,

989. Freymuth, P, (1997), , Interpretations in the control theory of thermal anemometers
     measurement and instrumentation, measurement: anemometer, low air velocity in room,

990. Fricke, J., Heinemanna, U. and Ebert, H. P., (2008), , Vacuum insulation panels--From research to market

991. Fridley, K. J. Ed, (2002), , Wood and wood-based materials: current status and future
     market, trend, future, surveys, reviews, statistics, wood, lumber, timber,

992. Friedman, D., (2005), , Mold "testing" -- examining the validity of current indoor mold sampling techniques
     fungi: assessment, sampling and analysis,

993. Frondel, M., Ritter, N., Schmidt, C. M. and Vance, C., (2010), , Economic impacts from the promotion of renewable energy technologies: The German experience

994. Fu, G., Liu, C., Chen, S. and Hong, J., (2004), , Investigating the conversion coefficients for free water surface evaporation of different evaporation pans
     material properties: hygrothermal,

995. Fung, F., (2002), , Mold associated respiratory illness
     fungi: health effects,

996. Fung, F. and Hughson, W. G., (2003), , Health effects of indoor fungal bioaerosol exposure
     fungi: exposure investigation,

997. Fung, T. Y. Y. and Yang, H., (2008), , Study on thermal performance of semi-transparent building-integrated photovoltaic glazings

998. Funk, C. and Wakili, K.G., (2007), , Driving potentials of heat and mass transport in porous building materials: a comparison between general linear, thermodynamic and micromechanical derivation schemes
     HAM: theory and modelling,

999. Furler, R. A., (1991), , Angular dependence of optical properties of homogeneous glasses

1000. Future Fundations, (2002), , Principle of sustanable construction
      construction industry, green building, sustainable building, sustainability, environment,

1001. Galasiu, A. D. and Veitch, J. A., (2006), , Occupant preferences and satisfaction with the luminous environment and control systems in daylit offices: a literature review

1002. Galbraith, G. H. and Mclean, R.C, (1993), , The determination of vapour and liquid transport coefficients as input to combined heat mass transfer models
      HAM: theory and modelling, liquid transport, moisture diffusivity,

1003. Galbraith, G. H., Guo, J.S. and McLean, R.C, (2000), , The effect of temperature on the moisture permeability of building materials
      envelope materials, material properties: hygrothermal, measurement: hygrothermal properties,

1004. Galbraith, G. H., Li, J., Guo, J., Kelly, D., Mclean, R. C. and Grunewald, J., (2001), , Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures
      HAM: theory and modelling,

1005. Galbraith, G. H., Li, J., Mclean, C. and Baker, P. H., (2001), , The influence of space discretization on the accuracy of numerical simulation of heat and moisture transport in porous building materials
      HAM: simplified models - simplification,

1006. Galbraith, G. H., R. C. McLean, Gillespie, J. Guol and D. Kelly, (1998), , Nonisothermal moisture diffusion in porous building materials
      governing equations for heat and moisture transfer, HAM: material properties,

1007. Galbraith, G.H. and Mclean, R.C., Guo, J., (1997), , The selection of appropriate flow potentials for moisture transport models
      HAM: experimental work, HAM: theory and modelling,

1008. Galbraith, G.H., Mclean, R.C., Guo, J., Kelly, D., Lee, C., (1999), , The use of differential permeabilty in moisture transport modelling
      HAM: material properties,

1009. Galbraith, G.H., R.C. McLean and J.S. Guo, (1998), , Moisture permeability data presented as a mathematical relationship
      HAM: material properties, mathematics: regression analysis / fitting, measurement: vapor diffusion properties, WVT,

1010. Galleano, R., Dunlop, E. D. and Halton, D., (2004), , Comparison of pulsed solar simulator spectra in use at ESTI

1011. Gallo, F. M., (2000), , Mold damage due to moisture intrusion
      fungi: damage to buildings,

1012. Gan, G., (2009), , CFD modelling of transparent bubble cavity envelopes for energy efficient greenhouses

1013. Gan, G., (2006), , Simulation of buoyancy-induced flow in open cavities for natural ventilation
      buoyancy air flow, solar: utilization of solar energy, ventilation: air flow models, multi zone model,

1014. Gana, G. and Awbia, H. B., (1994), , Numerical simulation of the indoor environment
      IAQ: CFD, Indoor air movement-CFD, thermal comfort,

1015. Ganguli, U., (1986), , Wind and Air Pressures on the Building Envelope
      wind,

1016. Gao, J., Zhang, X., Zhao, .N., (2008), , Numerical determination of convection coefficients for internal surfaces in buildings dominated by thermally stratified flows
      CFD - computational fluid dynamics,

1017. Gao, J., Zhao, J.N., Gao, F.S., Zhang, X., (2009), , Modeling of Indoor Thermally Stratified Flows on the Basis of Eddy Viscosity/Diffusivity Model: State of the Art Review

1018. Gao, P., Korley, F., Martin, J. and Chen, B., (2002), , Determination of unique microbial volatile organic compounds produced by five Aspergillus species commonly found in problem buildings
      fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound, measurement: GC-MS,

1019. Gao, X. and Alvo, M., (2005), , A Unified Nonparametric Approach for Unbalanced Factorial Designs
      mathematics: regression analysis / fitting, mathematics: statistics,

1020. Garboczi, E. J., Bentz, D. P., Snyder, K. A., Martys, N. S., Stutzman, P. E., Ferraris, C. F. and Bullard, J. W., (2002), , An electronic monograph:modelling and measuring the structure and properties of cement-based materials
      concrete, design, material,

1021. Garcia, M. C. A. and Balenzategui, J. L., (2004), , Estimation of photovoltaic module yearly temperature and performance based on Nominal Operation Cell Temperature calculations

1022. Garg, H. P., Shukla, A. R., Madhuri, I., Agnihotri, R. C. and Chakravertty, S., (1985), , Development of a simple low-cost solar simulator for indoor collector testing

1023. Garrett, M.H., Rayment, P.R., Hooper, M.A., Abramson, M.J. and Hooper, B.M, (1998), , Indoor airborne fungal spores, house dampness and associations with environmental factors and respiratory health in children
      fungi: assessment, sampling and analysis, fungi: moisture damaged house -- indoor microbial concentrations,

1024. Gaspar, P. L. and de_Brito, J., (2008), , Quantifying environmental effects on cement-rendered facades: A comparison between different degradation indicators
      Fa?ade wetting, water runoff, soiling,

1025. Gaur, R. C. and Bansal, N. K., (1995), , Periodic solution of heat and mass transfer equations in plane geometry
      HAM: theory and modelling,

1026. Gaur, R. C. and N. K. Bansal, (2002), , Effect of moisture transfer across building components on room temperature
      building: simulation of building processes, coupled heat and moisture calculations,

1027. Gawin, D. J., and Schrefler, B.A, (2001), , Modeling of hygrothermal behavior of two-dimensional concrete structures
      concrete, coupled heat and moisture calculations, envelope materials, HAM: computer models,

1028. Gawin, D., Le, M., and Schrefler, B. A., (2001), , ANN approach to sorption hysteresis within a coupled hygro-thermo-mechanical FE analysis
      material properties: hygrothermal, sorption process: mathematical model,

1029. Gaylarde, C. C. and Gaylarde, P. M., (2005), , A comparative study of the major microbial biomass of biofilms on exteriors of buildings in Europe and Latin America
      Fa?ade wetting, water runoff, soiling,

1030. Gayo, E., Palomo, A. and Macias, A., (1993), , Infrared thermography as a tool for studying the movement of water through some building materials. Part 1. Capillary moisture
      capillary break, Infrared thermography (IRT), measurement: vapor diffusion properties, WVT, moisture transport in porous materials,

1031. Ge, H., (2003), , Study on overall thermal performance of metal curtain walls
      curtain wall, energy: calculation, Fazio's student: thesis, simulation: heat transfer, thermal, thermal analysis and performance,

1032. Ge, H. and Fazio, P., (2001), , Study on thermal performance of curtain walls using infrared thermography
      curtain wall, measurement: Infrared,

1033. Ge, H., Fazio, P. and Rao, J., (2001), , Experimental study of temperature distributions across two curtain wall systems
      curtain wall, envelope,

1034. Ge, H., P. Fazio, and J. Rao, (2001), , Transfer of heat, moisture and air through metal curtain walls
      curtain wall, windows, doors, fenestration,

1035. Gebremedhin, K. G. and Wub, B. X., (2003), , Characterization of flow field in a ventilated space and simulation of heat exchange between cows and their environment
      Indoor air movement-CFD, ventilation: air flow models, multi zone model,

1036. Gebski V., (2004), , Factorial designs: a graphical aid for choosing study designs accounting for interaction
      mathematics: statistics,

1037. Gerbasi, D., (2000), , The energy performance of the NOVTEC Advanced House
      energy, Fazio's student: thesis,

1038. Gereda, J.E., Klinnert, M.D., Price, M.R., Leung, D.Y.M. and Liu, A.H, (2001), , Metropolitan home living conditions associated with indoor endotoxin levels
      fungi: moisture damaged house -- indoor microbial concentrations,

1039. Gerilla, G. P., Teknomo, K. and Hokao, K., (2007), , An environmental assessment of wood and steel reinforced concrete housing construction
      embodied energy, life cycle assessment (LCA),

1040. Gertz, M. and Sattler, K-U., (2001), , A model and architecture for conceptualized data annotations
      mathematics,

1041. Geving, S., (2000), , Hygrothermal analysis of building structures using computer models
      HAM hygrothermal simulation, simulation of building process,

1042. Geving, S., (1997), , A systematic method for hygrothermal analysis of building constructions using computer models
      HAM: computer models, mathematics: Monte Carlo simulation method, mathematics: Monte Carlo simulation method, risk analysis,

1043. Geving, S. and Holme, J., (2009), , The drying potential and risk for mold growth in compact wood frame roofs with built-in moisture
      fungi and molds in buildings and their envelopes, wood frame houses and walls, wood structure,

1044. Geving, S., Karagiozis, A. and Salonvaara, M., (1997), , Measurements and two-dimensional computer simulations of the hygrothermal performance of a wood frame wall
      experiment: laboratory, HAM: application, wood frame houses and walls, wood structure,

1045. Ghaffarianhoseini, A., Dahlan, N. D., Berardi, U., Ghaffarianhoseini, A., Makaremi, N., Ghaffarianhoseini, M. and Theories, S.E.P.O.G.B.R.O.C., (2013), , implementations and challenges

1046. Ghandehari, H., (2000), , Kit homes as a self-help affordable strategy

1047. Ghani, F., Duke, M. and Carson, J. K., (2012), , Estimation of photovoltaic conversion efficiency of a building integrated photovoltaic/thermal (BIPV/T) collector array using an artificial neural network

1048. Ghiaus, C., (2006), , Experimental estimation of building energy performance by robust regression
      energy: calculation, mathematics: regression analysis / fitting,

1049. Gibb, A. and Isack, F., (2003), , Re-engineering through pre-assembly: client expectations and drivers

1050. Gibout, S., Franquet, E., B¨¦d¨¦carrats, J. and Dumas., J., (2012), , Comparison of different modelings of pure substances during melting in a DSC experiment

1051. Gibout, S., Franquet, E., Marechal, W. and Dumas, J., (2013), , On the use of a reduced model for the simulation of melting of solutions in DSC experiments

1052. Giner, M. M., Garc¨Şa, J. C. and Camacho, C.N, (2001), , Airborne Alternaria spores in SE Spain (1993-98)
      fungi: spore, aerosol,

1053. Glass, T.S. Steenhuis and J.-Y. Parlange,, (1989), , Wetting front instability: 1. Theoretical discussion and dimensional analysis
      Fa?ade wetting, water runoff, soiling,

1054. Glicksman, L.R. and Katsenelenbogen,S, (1996), , A study of water vapor transmission through insulation under steady state and transient conditions
      insulation, measurement: vapor diffusion properties, WVT,

1055. Global Industry Analysts, (2008), , Prefabricated Housing: A Global Strategic Business Report

1056. Godish, T., (1995), , Sick Buildings: Definition, Diagnosis and Mitigation
      fungi: MVOC - microbial volatile organic compound, IAQ - indoor air quality, IAQ: sick building syndrome, SBS,

1057. Goetzl, A. and D. B.McKeever, (1999), , Building codes obstacle or opportunity?
      building codes and standards, objective-based codes, performance-based building codes and standards, wood frame houses and walls, wood structure,

1058. Goia, F., Perino, M. and Serra, V., (2014), , Experimental analysis of the energy performance of a full-scale PCM glazing prototype

1059. Goldberg, L.F. and Aloi, T., (2001), , Space humidity/interior basement wall insulation moisture content relationships with and without vapor retarders
      envelope: interior finish, drywall, fungi: molds in buildings, vapor barrier, vapor retarder,

1060. Goldstein, J., et al., (2005), , Heat transfer - a review of 2002 literature
      thermal analysis and performance,

1061. Goldstein, R. J. and Cho, H. H., (1995), , A review of mass transfer measurements using naphthalene sublimation
      HAM: experimental work,

1062. Goldstein, R. J., et al, (2002), , Heat transfer - a review of 2000 literature
      simulation: heat transfer, thermal, surveys, reviews, statistics, thermal analysis and performance,

1063. Goldstein, R. J., Ibele, W. E., Patankar, S. V., Simon, T. W., Kuehn, T. H., Strykowski, P. J. and Tamma, K. K., (2006), , Heat transfer-A review of 2003 literature
      thermal analysis and performance,

1064. Goldstein, R. J., Ibele, W. E., Patankar, S. V., Simon, T. W., Kuehn, T. H., Strykowski, P. J., Tamma, K. K., Heberlein, J. V. R. and Davidson, J. H., (2010), , Heat transfer--A review of 2005 literature,

1065. Gomes, M. G., Santos, A. J., Rodrigues, (2014), , Solar and visible optical properties of glazing systems with venetian blinds: Numerical, experimental and blind control study

1066. Gonz¨˘lez-longatt, F. M., (2005), , Model of photovoltaic module in MatlabTM

1067. Goo, J. and Kim, C. S., (2001), , Analysis of aerosol bolus dispersion in a cyclic tube flow by finite element method
      fungi: aerobiology, dispersion of spores,,

1068. Gordon, W. A., Johanning, C., Haddad, L., (2001), , Cognitive Impairment Associated with Exposure to Toxigenic Fungi
      fungi: health effects,

1069. Gordona, S., Mackay, D., G¨®recki, T., Cherry, J. A. and Pawliszyn, J., (2002), , A laboratory technique for investigation of diffusion and transformation of volatile organic compounds in low permeability media
      measurement: GC-MS, measurement: SPME, VOC, VOC transport, VOC: measurement and identification,

1070. Gorecki, T. and Namiesnik, J., (2002), , Passive sampling
      fungi: assessment, sampling and analysis, measurement and instrumentation,

1071. Gorlo, D., Zygmunt, B., Dudek, M., Jaszek, A., Pilarczyk, M. and Namiesnik, J., (1999), , Application of solid-phase microextraction to monitoring indoor air quality
      IAQ - indoor air quality, measurement: SPME,

1072. Gornes, J. A., (1995), , The appearance of moulds in buildings
      fungi: molds in buildings, moisture source for building envelope, rain on walls, rain precipitation,

1073. G¨®rny, R. L., Dutkiewicz, J. and Krysiska-traczyk, E., (1999), , Size distribution of bacterial and fungal bioaerosols in indoor air
      fungi: spore, aerosol,

1074. G¨®rny, R. L., Mainelis, G., Grinshpun, S. A., Willeke, K., Dutkiewicz, J. and Reponen, T., (2003), , Release of Streptomyces albus propagules from contaminated surfaces
      fungi: aerobiology, dispersion of spores,,

1075. Gorny, R. L., Reponen, T., Willeke, K., Schmechel, D., Robine, E., Boissier, M. and Grinshpun, S. A., (2002), , Fungal fragments as indoor air biocontaminants
      fungi: components and products, fungi: damage to buildings,

1076. Gorny, R.L., (2004), , Filamentous microorganisms and their fragments in indoor air - A review
      fungi: assessment, sampling and analysis,

1077. Gorny, R.L., Reponen T., Grinshpun, S.A. and Willeke, K., (2001), , Source strength of fungal spore aerosolization from moldy building material
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

1078. Gots, R. E., (2002), , Correcting mold misinformation
      fungi: remediation, treatment, prevention,

1079. Goulart, A. G., Moreira, D. M., Carvalho, J. C. and Tirabassi, T., (2004), , Derivation of eddy diffusivities from an unsteady turbulence spectrum
      ventilation: air flow models, multi zone model,

1080. Goverse, T., M. P. H., Groenewegen, P., Worrell, E. and Smits, R. E. H. M., (2001), , Wood innovation in the residential construction sector; opportunities and constraints
      wood, lumber, timber,

1081. Gowreesunker, B. L., Tassou, S. A. and Kolokotroni, M., (2013), , Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an airport terminal building displacement conditioning system

1082. Gowri, K., (1991), , Knowledge-Based System Approach to Building Envelope Design
      Fazio's student: thesis,

1083. Gowri, K., (1984), , Analysis of a Folded Plate Sandwich Panel Roof System Using Assumed Stress Hybrid Elements
      Fazio's student: thesis,

1084. Gowri, K., Iliescu, S. and Fazio, P., (1994), , Creative case adaptation for building engineering design
      envelope design,

1085. Granqvist, C. G., (2012), , Oxide electrochromics: An introduction to devices and materials

1086. Granqvist, C. G., (2008), , Oxide electrochromics: Why, how, and whither

1087. Granqvist, C. G., (2007), , Transparent conductors as solar energy materials: A panoramic review,

1088. Granqvist, C. G., Azens, A., Hjelm, A., Kullman, L., Niklasson, G. A., Ronnow, D., Mattsson, M. S., Veszelei, M. and Vaivars, G., (1998), , Recent advances in electrochromics for smart windows applications
      windows, doors, fenestration,

1089. Grant, C., Hunter, C. A., Flannigan, B. and Bravery, A. F., (1989), , The moisture requirements of moulds isolated from domestic dwellings
      fungi: growth and growth model,

1090. Gratia, E. and Andr¨¦ De Herde, (2007), , Are energy consumptions decreased with the addition of a double-skin?
      double facades,

1091. Graves, H.M. and Phillipson, M.C, (2000), , Potential implications of climate change in the built environment
      built environment, climate change, global warming,

1092. Gravesen, S., (2000), , Microbiology on indoor air'99- what is new and interesting? an overview of selected papers presented in Edinburgh, August, 1999
      fungi and molds in buildings and their envelopes, IAQ: measurement, IAQ: sick building syndrome, SBS,

1093. Gravesen, S., (2001), , Microfungal contamination of damp buildings: Biological aspects
      fungi: health effects, fungi: MVOC - microbial volatile organic compound,

1094. Gravesen, S., Nielsen, K. F. and DAMIB, (2000), , The Danish Research Programme: "moulds in Buildings" 1998-2001
      fungi: damage to buildings,

1095. Gravesen, S., Nielsen, P.A., Iversen, R., Nielsen, K.F, (1999), , Microfungal contamination of damp buildings - examples of risk constructions and risk materials
      fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations, fungi: molds in buildings, moisture source for building envelope,

1096. Gray, M. R., (2002), , Molds, Mycotoxins, and Human Health
      fungi: components and products, fungi: indoor biocontamination -- health symptom,

1097. Grayson, J. M., Pang, W. and Schiff, S., (2013), , Building envelope failure assessment framework for residential communities subjected to hurricanes
      building: damage and failures,

1098. Graziani, M., Fornasiero, P. (eds), (2007), , Renewable resources and renewable energy: a global challenge

1099. Green F. ; Highley T. L. , (1997), , Mechanism of brown-rot decay: paradigm or paradox
      fungi: damage to buildings,

1100. Green, S., Liu, P.Y. and O'Sullivan J., (2002), , Factorial design considerations
      mathematics: statistics,

1101. Greest, M. C. H., (1995), , Distortion analysis of nonlinear systems with memory usingmaximum-length sequences
      mathematics,

1102. Gregg, S.J. and K. S. W. Sing, (1982), , Adsorption, surface area and porosity, 2ed
      capillary break, capillary theory, HAM: theory and modelling,

1103. Griffin, D.M., (1977), , Water potential and wood-decay fungi
      fungi and molds in buildings and their envelopes,

1104. Griffith, B. and Chen, Q. Y., (2004), , Framework for coupling room air models to heat balance model load and energy calculations (RP-1222)
      Indoor air movement-CFD, thermal analysis and performance,

1105. Griffith, B. T., Arasteh, D. and T¨ąrler, D., (1996), , Gas-filled panels: an update on applications in the building thermal envelope
      advanced insulation, insulation,

1106. Griffith, B. T., D. T¨ąrler, and D. Arasteh, (1996), , Surface temperatures of insulated glazing units: infrared thermography laboratory measurements
      Infrared thermography (IRT), windows, doors, fenestration, windows, doors, fenestration,

1107. Griffith, B. T., F. Beck, D. Arasteh and D. Ttirler, (1995), , Issues associated with the use of infrared thermography for experimental testing of insulated systems
      Infrared thermography (IRT), windows, doors, fenestration,

1108. Griffith, B., Long, N., Torcellini, P., Judkoff, R., Crawley, D. and Ryan, J., (2007), , Assessment of the technical potential for achieving net zero-energy buildings in the commercial sector
      Zero Energy Building: ZEB,

1109. Griffith, B.T., H. Goudey and D. Arasteh, (2002), , Surface temperatures of window specimens: infrared thermography laboratory measurements
      capillary break, condensation and evaporation, Infrared thermography (IRT), measurement: Infrared, windows, doors, fenestration,

1110. Griffiths, R., Goodhew, S., Pilkington, B., Wilde, P.D., (2008), , Thermal Probe Technology for Buildings: Transition from Laboratory to Field Measurements

1111. Griffiths, W. D., Stewart, I. W., Futter, S. J., Upton, S. L. and Mark, D., (1997), , Development of sampling methods for the assessment of indoor bioaerosols
      fungi: assessment, sampling and analysis, fungi: assessment, sampling and analysis,

1112. Griffiths, W. D., Stewart, I. W., Reading, A. R., Futter, S. J. and Number, P. V., (1998), , Effect of aerosolization, growth phase and residence time in spray and collection fluids on the culturability of cells and spores
      fungi: aerobiology, dispersion of spores,, fungi: assessment, sampling and analysis, fungi: mycology studies, culturing, fungi: spore, aerosol,

1113. Grimsrud, D. T. and Hadlich, D. E., (1999), , Residential pollutants and ventilation strategies: volatile organic compounds and radon
      building: residential, house, home, ventilation - Air Infiltration and Ventilation in Buildings, VOC,

1114. Grinshpun, S. A., Reponen, T. and Willeke, K., (1997), , Aerosol characteristics of airborne actinomycetes and fungi
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

1115. Grinshpun, S.A., Mainelis, G., Trunov, M. G¨®rny, R. L., Sivasubramani, S.K. and Reponen, T., (2005), , Collection of airborne spores by circular single-stage impactors with small jet-to-plate distance

1116. Grinzato, E. G., Marinetti, S. and Bison, P. G., (2004), , Air tightness monitoring by IR thermography

1117. Grinzato, E., Cadelano, G. and Bison, P., (2010), , Moisture map by IR thermography

1118. Grinzato, E., Vavilov, V. and Kauppinen, T., (1998), , Quantitative infrared thermography in buildings

1119. Gronbaek, D. J. v. H., (2003), , A European Research Council: an idea whose time has come?
      research, funding,

1120. Grunewald, J., (2000), , Documentation of the Numerical Simulation Program DIM3.1, Volume 1: Theoretical Fundamentals
      HAM: computer models,

1121. Grunewald, J., H?upl, P., Bomberg, M., (2003), , Towards an engineering model of material characteristics for input to ham transport simulations - Part 1: an approach
      material properties: hygrothermal,

1122. Grunewald, J., Plagge, R. and H?upl, P., (2001), , Numerical and experimental investigation of coupled heat and moisture transport problems
      computer codes for heat-air-moisture transfer, coupled heat and moisture calculations, HAM: computer models, measurement: moisture content,

1123. Grunewald, J., Plagge, R. and H?upl, P., (2002), , A two-levelled hygrothermal material database for the numerical simulation program DELPHIN4
      HAM: material properties, HAM: simplified models - simplification, HAM: theory and modelling,

1124. Gu, H., (2001), , Structure based, two-dimensional, anisotropic, transient heat conduction model for wood
      thermal analysis and performance, wood, lumber, timber,

1125. Gu, H., (1997), , Moisture Gradient Measurement During Kiln Drying of Red Oak
      measurement: moisture content,

1126. Guana, L., Yang, J. and Bell, J. M., (2007), , Cross-correlations between weather variables in Australia
      weather data and issues,

1127. Gudmundsson, K., (2001), , Isotopic tracing of moisture in buildings
      fungi: molds in buildings, measurement and instrumentation,

1128. Gudmundsson, K., (2002), , Isotopic analysis of moisture transport
      experiment: laboratory,

1129. Gudum, C., (2003), , Moisture transport and convection in building envelopes - ventilation in light weight outer walls
      experiment: field testing and monitoring programs,

1130. Guit¨¦, P., (1983), , Fabrication d'une brique l¨¦g¨¨re et isolante ¨¤ partir d'argile de sciures de bois et de d¨¦chets de verre
      Fazio's student: thesis,

1131. Gulay, G.W., C.D. Stewart, G.J. Foley, (1993), , Field investigation survey of airtightness, air movement and indoor air quality in high-rise apartment buildings: summary report
      building: highrise, ventilation: airtightness, air leakage,,

1132. Gunerhan, H. and Hepbasli, A., (2007), , Determination of the optimum tilt angle of solar collectors for building applications

1133. Gunnewiek, L. H., Brundrett, E. and Hollands, K. G. T., (1996), , Flow distribution in unglazed transpired plate solar air heaters of large area

1134. Gunnewiek, L., Hollands, K. G. and Brundrett,, (2002), , Effect of wind on flow distribution in unglazed transpired-plate collectors

1135. Gurevich, M. S., (2005), , Water penetration through exterior walls
      rain penetration, water intrusion,

1136. Gurung, N., Mahen Mahendran, (2001), , Comparative life cycle costs for new steel portal frame building systems
      envelope materials, greenhouse gas emissions, life cycle assessment (LCA),

1137. Gusdorf, and Hamlin, T., (1995), , Indoor air quality and ventilation rates in R-2000 houses - final report
      housing market, IAQ - indoor air quality, ventilation: standards,

1138. Gustavsen, A., Grynning, S., Arasteh, D., Jelle, B. P. and Goudey, H., (2011), , Key elements of and material performance targets for highly insulating window frames

1139. Gustavsen, A., Jelle, B. P., Arasteh, D. and Kohler, C., (2007), , State-of-the-art highly insulating window frames -- research and market review
      PV/T, windows, doors, fenestration,

1140. Gustavson, M., (2000), , Look to interior for source of moisture that causes rot
      moisture damages and problems for buildings, moisture source for building envelope,

1141. Gustavsson, L. S., Sathre, R. S., (2006), , Variability in energy and carbon dioxide balances of wood and concrete building materials
      sustainability, environment, wood frame houses and walls, wood structure,

1142. Gustavsson, L., Pingoud, K., (2006), , Carbon dioxide balance of wood substitution: Comparing concrete- and wood-framed buildings
      wood frame houses and walls, wood structure,

1143. Gutarowsk, B. and Piotrowska, M., (2007), , Methods of mycological analysis in buildings
      fungi: assessment, sampling and analysis,

1144. Gutarowska, B. and Zakowska, Z., (2002), , Elaboration and application of mathematical model for estimation of mould contamination of some building materials based on ergosterol content determination
      fungi: components and products, fungi: molds in buildings,

1145. Haapio, A. and Viitaniemi, P., (2008), , A critical review of building environmental assessment tools

1146. Hacek, D. M., Trick, W. E., Collins, S. M., Noskin, G. A. and Peterson, L. R., (2000), , Comparison of the rodac imprint method to selective enrichment broth for recovery of vancomycin-resistant enterococci and drug-resistant enterobacteriaceae from environmental surfaces
      fungi: assessment, sampling and analysis,

1147. Hachem, C., Athienitis, A., Fazio, P.,, (2012), , Design Methodology of Solar Neighborhoods

1148. Hachem, C., Chaubey, Y., Fazio,, Rao, J. and Bartlett, K., (2010), , Statistical analysis of microbial volatile organic compounds in an experimental project: identification and transport analysis

1149. Hachem, C., Fazio, P., Rao, J. and Bartlett, K., (2009), , Identification and transport investigation of microbial volatile organic compounds in full-scale stud cavities

1150. Hadjab, M., Berrah, S. and Abid, H., (2012), , Neural Network for Modeling Solar Panel

1151. Haeulp, P., Neue, J. and Fechner, H., (1997), , Coupled heat, air and moisture transfer - the base of the durability of facade repair systems
      durability: building envelope, fungi: legal, law, litigation, insurance issues, renovation, repair, maintenance,

1152. Haeupl, P. and Xu, Y., (2001), , Numerical simulation of freezing and melting in porous materials under the consideration of the coupled heat and moisture transport
      HAM: theory and modelling,

1153. Hagentoft, C. and H?gberg, A., (2002), , Prediction of driving rain intensities using potential flows
      wind-driven rain: CFD models,

1154. Hagentoft, C. E. and Harderup, E., (1996), , Moisture conditions in a north-facing wall with cellulos loose-fill insulation: construction with and without a vapor retarder and air leakage
      insulation, vapor barrier, vapor retarder, ventilation: airtightness, air leakage,,

1155. Hagentoft, C.-E. Kalagasidis, A.S., Adl-Zarrabi, B., Roels, S., Carmeliet, J., Hens, H., Grunewald, J., Funk, M., Becker, R., Shamir, D., Adan, O., Brocken, H., Kumaran, K., Djebbar, R., (2004), , Assessment method of numerical prediction models for combined heat, air and moisture transfer in building components: benchmarks for one-dimensional cases
      HAM hygrothermal simulation,

1156. H?gerh, L., C. G. Bornehag and Sundell, B. J., (2002), , Dampness in buildings and health: building characteristics as predictors for dampness in 8,681 swedish dwellings
      fungi: damp house -- health,

1157. Haghighat, F. (Ed.), (2013), , Final Report, IEA, annex 23, applying energy storage in buildings of the future

1158. Haghighat, F. (Ed.), (2014), , Best Practice for Architects and Engineers

1159. Haghighat, F., Lee, C. and Ghaly, W. S., (2002), , Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
      measurement and instrumentation, surveys, reviews, statistics, VOC, VOC, VOC transport,

1160. H?kansson, (1998), , Retarded sorption in wood. experimental study, analyses and modelling
      experiments and testing, Isotherm, wood, lumber, timber,

1161. H?llstr?ma, J., Barupa, K., Gr?nlundb, R., et al., (2009), , Documentation of soiled and biodeteriorated facades:next term A case study on the Coliseum, Rome, using hyperspectral imaging fl
      Fa?ade wetting, water runoff, soiling,

1162. Halsall, P., (2002), , Photovoltaics: taking in the sun
      double facades, solar: utilization of solar energy, technology,

1163. Hameury S., (2005), , The buffering effect of heavy timber constructions on the indoor moisture dynamic
      Moisture buffering,

1164. Hameury S. & Sterley M., (2006), , Magnetic resonance imaging of moisture distribution in Pinus sylvestris L. exposed to daily indoor relative humidity fluctuations
      experiment: laboratory,

1165. Hameury, S., (2005), , Moisture buffering capacity of heavy timber structures directly exposed to an indoor climate: a numerical study
      Moisture buffering,

1166. Hameury, S., (2006), , The hygrothermal inertia of massive timber constructions
      Moisture buffering, wood, lumber, timber,

1167. Hamlin, T. and Gusdorf, J., (1997), , Airtightness and energy efficiency of new conventional and R-2000 housing in Canada, 1997
      ventilation: airtightness, air leakage,,

1168. Hammad, F. and Abu-hijleh, B., (2010), , The energy savings potential of using dynamic external louvers in an office building

1169. Hammarberg, E., (2005), , A case study of early steel curtain wall: the chrysler building,
      curtain wall,

1170. Hamza, N. and Horne, M., (2007), , Educating the designer: An operational model for visualizing low-energy architecture
      design,

1171. Han, J., Lu, L. and Yang, H., (2009), , Thermal behavior of a novel type see-through glazing system with integrated PV cells
      PV PV Photovoltaic, PV/T, windows, doors, fenestration,

1172. Hangan, H., (1999), , Wind-driven rain studies. A C-FD-E approach
      wind-driven rain: CFD models,

1173. Hansen, A. T., (1984), , Moisture problems in walls
      moisture damages and problems for buildings,

1174. Hansen, E. and Hansen, M. H., (2002), , TDR measurement of moisture content in aerated concrete
      measurement: moisture content,

1175. Hansen, K. K., (1996), , Sorption isotherms: a catalog and a data base
      HAM: material properties, Isotherm, sorption process: mathematical model,

1176. Hansen, K. K. and Bertelsen, N. H., (1996), , Results of a water vapor transmission round-robin test using cup methods
      HAM: material properties, mathematics: error analysis, uncertainty analysis, measurement: vapor diffusion properties, WVT,

1177. Hansen, K. K., Rode, C., and Hansen, E., (2001), , Experimental investigation of the hygrothermal performance of insulation materials
      experiment: laboratory, insulation, thermal analysis and performance,

1178. Hansen, K.K., (1986), , Sorption isotherms - a catalogues
      material properties: hygrothermal,

1179. Hansen, M. H., Nicolajsen, A. and Stang, B. D., (2002), , On the influence of cavity ventilation on moisture content in timber frame walls
      capillary break, cavity wall, experiment: field testing and monitoring programs, experiment: hygrothermal performance,

1180. Hansen, M.H. and A. Nicolajsen, (1999), , Protection of wood by design
      cladding, siding, veneer, rain, testing facility,

1181. Hanzawa, H., Melikow, A. K. and Fanger, P. O., (1987), , Airflow characteristics in the occupied zone of ventilated spaces.
      Indoor air movement, measurement: anemometer, low air velocity in room,

1182. Haq, M. A., Hassan, M. Y., Abdullah, H., Rahman, H. A., Abdullah, P., Hussin, F., Said, D. M. and Buildings, R.O.L.C.T.I.C., (2014), , their performance and affecting factors

1183. Hara, T., Shimizu, M., Iguchi, K. and Odagiri, G., (1997), , Chaotic fluctuation in natural wind and its application to thermal amenity
      wind,

1184. Harderup, E., (1995), , Moisture conditions at the outer surface of constructions with negligible heat and moisture capacity
      drying potential of building envelope, Resources: research programs on moisture in building envelope,

1185. Harderup, E., (1997), , Estimation of risk of high moisture conditions in an external wall
      HAM: theory and modelling, moisture control, moisture management, rain on walls, rain precipitation, risk analysis,

1186. Harderup, E. and P.I. Sandberg, (1999), , Moisture control in buildings - how can varying outdoor climate be allowed for?
      moisture control, moisture management,

1187. Hardin, B. D., Kelman, B. J. and Saxon, A., (2003), , Adverse human health effects associated with molds in the indoor environment
      fungi: health effects,

1188. Hargreaves, M., Parappukkaran, S., Morawska, L., Hitchins, J., He, C. and Gilbert, D., (2003), , A pilot investigation into associations between indoor airborne fungal and non-biological particle concentrations in residential houses in Brisbane, Australia.
      particle transport, penetration of particulate, through walls,

1189. Harney, J., Trunov, M., Grinshpun, S., Willeke, K., Choe, K., Trakumas, S. and Friman, W., (2000), , Release of lead-containing particles from a wall enclosure
      envelope,

1190. Harriman, L.G., G. W. Brundrett, and R. Kittler, (2001), , The new ASHRAE design guide for humidity control in commercial buildings
      building: commercial, office, guideline, moisture control, moisture management, Standards: ASHRAE,

1191. Harrison, S. J. and Bernier, M. A., (1984), , A Reference heat source for solar collector thermal testing

1192. Harrison, S. J. and Collins, M. R., Harrison, S. J. and Bernier, M. A., (1999), , Queen's university solar calorimeter ¨C design, calibration, and operating procedure

1193. Harrison, S. J. and Dubrous., (1990), , Determination of Window Thermal Characteristics Using a Solar Simulator Based Test Method

1194. Harrison, S. J. and von_Wonderen., S. J., (1998), , Evaluation of solar heat gain coefficient for solar-control glazings and shading devices

1195. Hartkopf, V. and Loftness, V., (1999), , Global relevance of total building performance
      sustainability, environment,

1196. Hasan, A., Mccormack, S. J., Huang, M. J. and Norton, B., (2010), , Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics
      PV/T,

1197. Hassan, F., (1978), , Mechanical Properties of One-Part Urethane Sealants
      Fazio's student: thesis, sealant,

1198. Hassan, O. A. B., (2013), , An alternative method for evaluating the air tightness of building components

1199. Hassanain, M. A. and Harkness, E. L., (1998), , Priorities in Building Envelope Design
      design, envelope design, sustainability, environment,

1200. Hauck, B. C., Grinshpun, S. A., Reponen, A., Reponen, T., Willek, K., Bornschein, R. L., (1997), , Field Testing of New Aerosol Sampling Method With a Porous Curved Surface as Inlet

1201. Hauglustaine, J.M, (2001), , Multicriteria interactive tool to sketch the building envelope during first stages of architectural design
      envelope requirements,

1202. Haupl, P., Fechner, H., (2003), , Hygric material properties of porous building materials
      material properties: hygrothermal,

1203. Haverinen, U. et al, (2001), , Modeling moisture damage and its association with occupant health symptoms
      bacteria, building: residential, house, home, country: Europe, experiment: survey and questionnaire, fungi: damage to buildings, fungi: health effects, fungi: indoor biocontamination -- health symptom,

1204. Haverinen, U., Husman, T., Pekkanen, J., Vahteristo, M., Moschandreas, D., Nevelainen, A., (2001), , Characteristics of moisture damage in houses and their association with self-reported symptoms of the occupants
      experiment: survey and questionnaire, fungi: damp house -- health,

1205. Haverinen, U., Husman, T., Toivola, M., Suonketo, J., Pentti, M., Lindberg, R., Leinonen, J., Hyvarinen, A., Meklin, T. and Nevalainen, A., (1999), , An approach to management of critical indoor air problems in school buildings
      IAQ - indoor air quality,

1206. Haverinen, U., Husman, T., Vahteristo, M., Koskinen, O., Moschandreas, D., Nevalainen, A. and Pekkanen, J., (2001), , Comparison of two-level and three-level classifications of moisture-damaged dwellings in relation to health effects
      fungi: health effects, moisture damages and problems for buildings, occupancy, occupants, residents, homeowner,

1207. Haverinen, U., Vahteristo, M., Moschandreas, D., Nevalainen, A., Husman, T. and Pekkanen, J., (2003), , Knowledge-based and statistically modeled relationships between residential moisture damage and occupant reported health symptoms
      fungi: damp house -- health, fungi: indoor biocontamination -- health symptom,

1208. Hawes, D. W., Banu, D. and Feldman, D., (1992), , The stability of phase change materials in concrete

1209. Hawken, P., Lovins, A., and Lovins, H.L, (1999), , Natural capitalism: creating the next industrial revolution
      construction industry, economical requirement of building envelope, green building materials, Zero Energy Building: ZEB,

1210. Hazleden, D., (2001), , Envelope Drying Rates Experiment, Final Report
      drying potential of building envelope, experiment: hygrothermal performance, experiment: hygrothermal performance, OSB - Oriented strandboard,

1211. Hazleden, D. G. and Morris, P. I., (1999), , Designing for durable wood construction: the 4 Ds
      envelope design,

1212. Hazleden, D.G. and P.I. Morris, (2001), , The influence of design on drying rates in wood-frame walls under controlled conditions
      wood frame houses and walls, wood structure,

1213. Hazlen, D. G. and Morris, P. I., (2002), , Evaluation of vapour diffusion ports on drying of wood-frame walls under controlled conditions
      envelope design, moisture control, moisture management, OSB - Oriented strandboard,

1214. He, H. S., (2006), , IFC-based framework for evaluating building envelope performance

1215. He, W., Zhang, Y. and Ji, J., (2011), , Comparative experiment study on photovoltaic and thermal solar system under natural circulation of water
      PV/T,

1216. Health Council, (2002), , Environmental health risk assessment guidelines for assessing human health risks from environmental hazards
      IAQ: Health,

1217. Healy, W. M., (2003), , Moisture Sensor Technology: A Summary of Techniques for Measuring Moisture Levels in Building Envelopes

1218. Healy, W. M. and van Doom, E., (2004), , A preliminary investigation on the use of ultra-wideband radar for moisture detection in building envelopes
      measurement: gravimetry for moisture content,

1219. Heath, F. M. a. and Shea, E.F.A., (2014), , Conditions affecting the moisture buffering measurement performed on compressed earth blocks

1220. Heaton, P.E., Callow, M.E., Butler, G.M. and Milne, A., (1991), , Control of mould growth by anti-fungal paints
      fungi: growth and growth model,

1221. Hedenblad, G., (1996), , Moisture properties of some modern building materials
      Isotherm, material properties: hygrothermal,

1222. Heffernan, V., (2001), , Buildings: one wall centre mechanical and electrical systems
      building subsystems: electrical, building subsystems: mechanical, envelope design,

1223. Hegazy, T., (1993), , Integrated bid preparation with emphasis on risk assessment using neural networks
      Fazio's student: thesis,

1224. Heim, D. and Clarke, J., (2004), , Numerical modelling and thermal simulation of PCM¨Cgypsum composites with ESP-r

1225. Heinsohn, P., (0), , How reliable are your one-minute Andersen sample data?
      fungi: assessment, sampling and analysis,

1226. Heinsohn, P., (2002), , The relationship between fungal growth in wall cavities and the fungal ecology of indoor environments
      fungi and molds in buildings and their envelopes, fungi: moisture damaged house -- indoor microbial concentrations,

1227. Heiselberg, P. and Li, Z., (2007), , Experimental study of buoyancy driven natural ventilation through horizontal openings
      buoyancy air flow,

1228. Hellinga, H. and Hordijk, T., (2014), , The D&V analysis method: A method for the analysis of daylight access and view quality

1229. Helmke, C., (0), , Third generation BIPV standard building element with integrated photovoltaic
      BIPV,

1230. Hendriks, L. and Lindenb, K.V.D, (2002), , Building envelopes are part of a whole: reconsidering traditional approaches
      envelope, research, funding,

1231. Hendriks, L., Hauglustaine, J.M. and Hens, H., (2000), , Building envelopes in a holistic perspective
      envelope, envelope performance,

1232. Henemann, A., (2008), , BIPV: Built-in solar energy
      BIPV,

1233. Hennebert, G. L. and Gams, W., (2002), , Analysis of possibilities to amend or delete Art. 59 of the international code of botanical nomenclature to achieve a unified nomenclature and classification of the fungi
      fungi and molds in buildings and their envelopes,

1234. Henriques, A. A., (2008), , Efficient analysis of structural uncertainty using perturbation techniques

1235. Henriques, A. A., Veiga, J. M. C., Matos, J. A. C. and Delgado, J. M., (2008), , Uncertainty analysis of structural systems by perturbation techniques

1236. Henr¨Şquez, V. I., Villegas, G. R. and Nolla, J. M. R., (2001), , Airborne fungi monitoring in Santiago, Chile
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

1237. Hens, H., (2000), , Fungal defacement in buildings: a performance related approach
      fungi and molds in buildings and their envelopes, mathematics: stochastical modeling and analysis, performance-based building codes and standards, risk analysis,

1238. Hens, H., (1997), , Hygric properties of a new humidity controlled vapor retarder
      smart vapor retarder,

1239. Hens, H., (1996), , Modeling. Final Report
      computer codes for heat-air-moisture transfer,

1240. Hens, H., (1998), , Performance-based development of a thermally insulated pitched roof system
      envelope performance, insulation, roof, vapor barrier, vapor retarder,

1241. Hens, H., (1996), , Heat, air and moisture transfer in insulated envelope parts. Final Report, Volume 1, Modelling
      HAM: theory and modelling,

1242. Hens, H., (1992), , IEA Annex 14: Condensation and Energy
      condensation and evaporation, energy,

1243. Hens, H. and J. Carmeliet, (2002), , Performance prediction for masonry walls with EIFS using calculation procedures and laboratory testing
      brick, masonry, mortar, EIFS, HAM: application, HAM: theory and modelling,

1244. Hens, H. and Fatin, A.M, (1995), , Heat-air-moisture design of masonry cavity walls: theoretical and experimental results and practice
      brick, masonry, mortar, cavity wall, HAM: experimental work, HAM: theory and modelling, interstial condensation,

1245. Hens, H. and Janssens, A., (1999), , Heat and moisture response of vented and compact cathedral ceilings: a test house evaluation
      experiment: field testing and monitoring programs, experiments and testing,

1246. Hens, H. and Janssens, A., (1993), , Inquiry on HAMCAT codes
      computer codes for heat-air-moisture transfer, coupled heat and moisture calculations, HAM: computer models, HAM: theory and modelling, Resources: research programs on moisture in building envelope,

1247. Hens, H. and Janssens, A., (1998), , Application of a new type of air and vapor retarder in a self-drying sloped roof with a cathedral ceiling
      EIFS, experiment: facility on moisture in building envelope, roof, smart vapor retarder,

1248. Hens, H., B. Remans, E. Vamnechelen, and M. Hus, (1992), , Pitched roofs, heat-air-moisture transport in tiled and slated roofs with the thermal insulation at rafter level
      HAM: theory and modelling, roof,

1249. Hens, J. A. and H. Hens, (2003), , Interstitial condensation due to air leakage: a sensitivity analysis
      condensation and evaporation, ventilation: airtightness, air leakage,,

1250. Hensen, J., (0), , Past, present and future plans of the International Building Performance Simulation Association -- IBPSA
      research, funding, simulation of building process,

1251. Hensen, J., (1999), , Simulation of building energy and indoor environmental quality - some weather data issues
      weather data and issues,

1252. Hensen, J. L. M., Janak, M., Kaloyanov, N. G. and Rutten, P. G. S., (1998), , Introducing building energy simulation classes on the web
      Education, training, simulation: energy,

1253. Hensen, J. L. M., Lamberts, R. and Negraoc, C. O. R., (2002), , A view of energy and building performance simulation at the start of the third millennium
      simulation of building process,

1254. Henson, J., (2005), , Integrating BIPV: How the market for building integrated photovoltaics is being created in the USA
      BIPV,

1255. Hernandez, P. and Kenny, P., (2010), , From net energy to zero energy buildings: Defining life cycle zero energy buildings (LC-ZEB)
      Zero Energy Building: ZEB,

1256. Hern¨˘ndez-p¨¦rez, I., ¨˘lvarez, G., Xam¨˘n, J., Zavala-guill¨¦n, I., Arce, J. and Sim¨˘, E., (2014), , Thermal performance of reflective materials applied to exterior building componentsˇŞA review

1257. Herr, C., Bittighofer, P. M., Bunger, J. et al., (1999), , Effect of microbial aerosols on human health
      fungi: indoor biocontamination -- health symptom,

1258. Herrador, M. A. and Gonzalez, A. G., (2004), , Evaluation of measurement uncertainty in analytical assays by means of Monte-Carlo simulation
      mathematics: Monte Carlo simulation method,

1259. Herzog, L., (2004), , Building better envelopes: innovation and surging energy prices are driving North America's building-envelope sector
      envelope,

1260. Hewings, J., (2001), , Air quality indices: a review
      IAQ: sick building syndrome, SBS,

1261. Highley, T. L., (1999), , Biodeterioration of wood
      wood, lumber, timber,

1262. Highley, T. L. and Dashek, W. V., (1998), , Biotechnology in the study of brown-and white-rot decay
      biodeterioration, fungi and molds in buildings and their envelopes,

1263. Highley, T. L., H.S. Anantha Padmanabha and C.R. Howell, (1996), , Antagonistic properties of Gliocladium virens against wood attacking fungi
      fungi and molds in buildings and their envelopes, fungi: preservatives against fungi growth and mold decay,

1264. Hilfer, R., (1996), , Transport and relaxation phenomena in porous media
      material properties: hygrothermal,

1265. Hill, D., (1996), , Analysis of the hygrothermal behaviour of residential high-rise building components
      building: highrise, building: residential, house, home, HAM: theory and modelling,

1266. Hill, T. and Lewicki, P., (2007), , Statistics methods and applications
      mathematics: statistics,

1267. Hill, T. and Lewicki, P., (2004), , A field comparison of four fungal aerosol sampling instruments: inter-sampler calibrations and caveats
      fungi: assessment, sampling and analysis,

1268. Hinks, J. and Cook, G., (2000), , The technology of building defects
      building: damage and failures,

1269. HIP, (2000), , Achieving Healthy Indoor Environments- A Review of Canadian Option
      IAQ - indoor air quality,

1270. Hirsch, S. R. and Sosman, J. A., (1976), , A one-year survey of mold growth inside twelve homes
      fungi: molds in buildings,

1271. Hirvonen, M., Suutari, M., Ruotsalainen, M., Lignell, U. and Nevalainen, A., (2001), , Effect of growth medium on potential of Streptomyces anulatus spores to induce inflammatory responses and cytotoxicity in RAW264.7 macrophages
      fungi: components and products, fungi: health effects,

1272. Hitchin, E. R. and Wilson, C. B., (1967), , A review of experimental techniques for the investigation of natural ventilation in buildings
      ventilation - Air Infiltration and Ventilation in Buildings,

1273. Hitchins, J., Morawska, L., Gilbert, D. and Jamriska, M., (2002), , Dispersion of particles from vehicle emissions around high- and low-rise buildings
      particle transport, penetration of particulate, through walls,

1274. Hjort, S. G., (1998), , A qualitative model for moisture balance in painted vertical wood paneling
      envelope components, experiment: field testing and monitoring programs, HAM: theory and modelling, vapor barrier, vapor retarder, wood, lumber, timber,

1275. HM Government., (2008), , Strategy for Sustainable Construction

1276. Hoa, J., (1996), , Real time detection of biological aerosols with fluorescence aerodynamic particle sizer (FLAPS)
      fungi: assessment, sampling and analysis,

1277. Hodgson, A. T., Faulkner, D., Sullivan, D. P., Dibartolomeo, D. L., Russell, M. L. and Fisk, W. J., (2003), , Effect of outside air ventilation rate on volatile organic compound concentrations in a call center
      PCA -- Principal component analysis, VOC,

1278. Hodgson, M.J., Morey, P., Leung, W.Y., Morrow, L., Miller, D., Jarvis, B.B., Robbins, H., Halsey, J.F. and Storey, E., (1998), , Building-associated pulmonary disease from exposure to Stachybotrys chartarum and Aspergillus versicolor
      fungi: health effects, fungi: Stachybotrys,

1279. Hoffmeyer, P. (Ed), (1997), , Proceedings of International Conference on Wood-Water Relations : Annual Conference of COST Action E
      wood, lumber, timber,

1280. Hofman, K. and Li, X., (2009), , Canada's energy perspectives and policies for sustainable development
      sustainability, environment,

1281. Holland, S. D. and Renshaw, J., (2010), , Physics-based image enhancement for infrared thermography

1282. Hollick, J. and Barnes., B., (2009), , PV Thermal Systems - Capturing the Untapped Energy
      PV/T,

1283. Holm, A., (2001), , Drying of an AAC flat roof in different climates Computational sensitivity analysis versus material property measurements
      HAM: computer models, mathematics: error analysis, uncertainty analysis, mathematics: sensitivity analysis, parametrical variation, mathematics: sensitivity analysis, parametrical variation, mathematics: stochastical modeling and analysis, roof, weather, climates,

1284. Holm, A. and Hunzel, H. M., (2000), , Non-isothermal moisture transfer in porous building materials
      computer codes for heat-air-moisture transfer, HAM: theory and modelling, material properties: hygrothermal,

1285. Holm, A. and Kuenzel, H. M., (2001), , Uncertainty approaches for hygrothermal building simulations - drying of an AAC flat roof in different climates
      HAM: theory and modelling, mathematics: error analysis, uncertainty analysis, risk analysis, roof, weather, climates,

1286. Holm, A. and K¨ąnzel, H.M, (1999), , Combined effect of temperature and humidity of the detoriation process of insulation materials in ETICS
      fungi: growth and growth model, insulation,

1287. Holm, A. and K¨ąnzel, H.M, (2000), , Two-dimensional transient heat and moisture simulations of rising damp with WUFI 2D
      computer codes for heat-air-moisture transfer, coupled heat and moisture calculations, envelope materials, HAM: theory and modelling, moisture source for building envelope,

1288. Holm, A. and Lengsfeld, K., (2007), , Moisture-buffering effect - experimental investigations and validation
      experiment: laboratory, Moisture buffering,

1289. Holm, A., Kuenzel, H. M. and Sedlbauer, K., (2003), , The hygrothermal behaviour of rooms: combining thermal building simulation and hygrothermal envelope calculation
      Whole building HAM,

1290. Holm, A.H. and H.M. K¨ąnzel, (2002), , Uncertainty of hygrothermal calculations
      HAM: theory and modelling, mathematics: error analysis, uncertainty analysis, moisture source for building envelope,

1291. Holm, A.H. and Kuenzel, H.M, (2002), , Practical application of an uncertainty approach for hygrothermal building simulations--drying of an AAC flat roof
      HAM: computer models, mathematics: error analysis, uncertainty analysis, mathematics: Monte Carlo simulation method, mathematics: stochastical modeling and analysis, risk analysis, roof,

1292. Holman, J. P. and Gajda, W. J., (1984), , Experimental methods for engineers
      experiments and testing, measurement and instrumentation,

1293. Holmes, E.R. and Holmes, L. D., (1987), , Western Polynesia's first home for the aged: Are concept and culture compatible?

1294. Holmes, M. J. and Hackera, J. N., (2007), , Climate change, thermal comfort and energy: Meeting the design challenges of the 21st century
      climate change, global warming, design,

1295. Holton, J. K., (1997), , Integrated systems performance and air quality and moisture management in a hot humid climate
      envelope design,

1296. Hong, T. D., Ellis, R. H. and Moore, D., (1997), , Development of a model to predict the effect of temperature and moisture on fungal spore longevity
      fungi: growth and growth model, fungi: spore, aerosol,

1297. Hong, T., Chou, S. K. and Bong, T. Y., (2000), , Building simulation: an overview of developments and information sources

1298. Hong, T., S. K. Chou, and T. Y. Bong, (1999), , Building simulation: an overiew of developments and informations
      building: simulation of building processes, computer codes for energy calculations, energy and moisture in building, simulation of building process,

1299. Hoof, J. van., (2008), , Forty years of Fanger's model of thermal comfort: comfort for all?
      thermal comfort,

1300. Horia Hangan and David Surry, (1999), , Wind-driven rain study for the Governor's Road Project
      wind driven rain,

1301. Horner, E. and Miller, J. D., (2001), , Microbial volatile organic compounds with emphasis on those arising from filamentous fungal contaminants of buildings
      fungi: MVOC - microbial volatile organic compound,

1302. Horner, W. E., Morey, R. and Ligman, D. B. K., (2004), , How quickly must gypsum board and ceiling tile be dried to preclude mold growth after a water accident?
      fungi: growth and growth model,

1303. Horner, W. E., Worthan, A. G. and Morey, P. R., (2004), , Air- and dustborne mycoflora in houses free of water damage and fungal growth
      experiment: survey and questionnaire, fungi: guideline,

1304. Horner, W., A. Worthan, B. Epstien, and M. Black, (1999), , MVOC emission patterns of indoor fungi: strain and culture differences
      fungi and molds in buildings and their envelopes, fungi: MVOC - microbial volatile organic compound, VOC,

1305. Horvat, M., (2005), , Protocol and assessment tool for performance evaluation of light-frame building envelopes used in residential buildings

1306. Horvat, M., Fazio, P., (2003), , Performance evaluation protocol for full-scale wood-frame building envelopes
      experiment: laboratory, standards,

1307. Hosni, M. H., Sipes, J. M. and Wallis, M. H., (1999), , Experimental results for diffusion and infiltration of moisture in concrete masonry walls exposed to hot and humid climates
      concrete, experiment: laboratory,

1308. House, J. M. and Kelly, G. E., (1999), , Overview of building diagnostics
      maintenance, inspection, and diagnose,

1309. Howard, J. L., (2001), , U.S. timber production, trade consumption, and price statistics 1965 to 1999
      market, trend, future, OSB - Oriented strandboard, wood, lumber, timber,

1310. Howard, J. L., (2006), , U.S. forest products annual market review and prospects, 2002--2006
      wood, lumber, timber,

1311. Howell, J., (2008), , The rising damp myth (paperback)
      building: damage and failures, moisture damages and problems for buildings,

1312. Hu, J. and Karava, P., (2014), , Model predictive control strategies for buildings with mixed-mode cooling

1313. Huang, B., Lin, T., Hung, W. and Sun, F., (2001), , Performance evaluation of solar photovoltaic/thermal systems
      PV/T,

1314. Huang, H. and Haghighat, F., (2002), , Modelling of volatile organic compounds emission from dry building materials
      VOC transport,

1315. Huang, H., Haghighat, F. and Wurtz, E., (2003), , An integrated zonal model for predicting transient VOC distribution in a ventilated room
      VOC transport,

1316. Huang, J. M., Chen, Q., Ribot, B., Rivoalen, H., (2004), , Modelling contaminant exposure in a single-family house
      IAQ - indoor air quality,

1317. Huang, N. Y., Write, J. and Collins, M. R., (2006), , Thermal resistance of a window with an enclosed venetian blind: guarded heated plate measurements

1318. Hubbs, B., Eng., P. and Hircock, M., (0), , Building envelope performance monitoring
      experiment: field testing and monitoring programs,

1319. Hudson, E., Aihoshi, D., Gaines, T., Simard, G. and Mullock, J., (2001), , The weather of Nunanut and the Arctic: Graphic area forecast 36 and 27

1320. Hughes, M. D., Maher, C., Borca-tasciuc, D., Polanco, D. and Kaminski, D., (2013), , Performance comparison of wedge-shaped and planar luminescent solar concentrators

1321. Hui, S. C. M., (2002), , Using performance-based approach in building energy standards and codes
      building codes and standards, energy, performance-based building codes and standards,

1322. Hukka, A. and Viitanen H., (1999), , A mathematical model of mold growth on wooden material
      fungi and molds in buildings and their envelopes, fungi: growth and growth model, fungi: molds in buildings, wood, lumber, timber,

1323. Hukseflux Thermal Sensors, (1999), , Application and specification of heat flux sensors [Online]
      measurement: heat flux,

1324. Humphreys, M. A. and Nicol, J. F., (1995), , An adaptive guideline for UK office temperatures
      thermal comfort,

1325. Hunter, A. J., (1996), , A complete theoretical isotherm for wood, based on capillary condensation
      material properties: hygrothermal,

1326. Hunter, A., Grant, C., Flannigan, B. and Bravery, A. F., (1988), , Mould in buildings: the air spora of domestic dwellings
      fungi: molds in buildings, fungi: Stachybotrys,

1327. Husman, T., (1996), , Health effects of indoor-air microorganisms
      fungi: health effects,

1328. Hussein, R., (1980), , Structural behaviour of sandwich panels
      Fazio's student: thesis,

1329. Husseina, T., Hameria, K.H. and Kulmalaa, M., (2005), , Indoor and outdoor particle size characterization at a familyhouse in Espoo--Finland
      particle transport, penetration of particulate, through walls,

1330. Hutcheon, N. B., (1989), , Forty year of vapor barriers
      vapor barrier, vapor retarder,

1331. Hutcheon, N. B. and Handegord, G. O., (1995), , Building science for a cold climate
      building, weather, climates,

1332. Hutcheon, N.B, (1963), , Requirements for Exterior Walls
      aesthetic requirement of building envelope, change in building design, construction, durability: building envelope, envelope requirements, solar energy, radiation, structure aspect, strength and rigidity of building envelope, weather, climates,

1333. Huxham, M. and Thomas, C. L. P., (2000), , Sampling procedures for intrinsically valid volatile organic compound measurements
      VOC: measurement and identification,

1334. Hynd, B. P. J. a., Gustavsen, A., Arasteh, D., Goudey, H. and Hart, R., (2012), , Fenestration of today and tomorrow: A state-of-the-art review and future research opportunities
      windows, doors, fenestration,

1335. Hyv?rinen, A., (2002), , Characterizing moisture damaged buildings - environmental and biological monitoring
      fungi and molds in buildings and their envelopes, fungi: aerobiology, dispersion of spores,, fungi: components and products, fungi: damage to buildings, fungi: damp house -- health, fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations, fungi: mold in walls -- indoor microbial concentrations, fungi: molds in buildings, fungi: mycology studies, culturing, fungi: spore, aerosol, moisture damages and problems for buildings,

1336. Hyv?rinen, A. et al, (2001), , Fungi in moisture-damaged building materials
      fungi and molds in buildings and their envelopes, fungi: damage to buildings,

1337. Hyvarinen, A., Meklin, T., Vepsalainen, A., Nevalainen, A., (2002), , Fungi and actinobacteria in moisture-damaged building materials - concentrations and diversity
      fungi: mycology studies, culturing,

1338. Hyvarinen, A., Vahteristo, M., Meklin, T., Jantunen, M., Nevalainen, A. and Moschandreas, D., (2001), , Temporal and spatial variation of fungal concentrations in indoor air
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

1339. Ibanez, M., Lazaro, A., Zalba, B. and Cabeza, L. F., (2005), , An approach to the simulation of PCMs in building applications using TRNSYS

1340. Ibearugbulem, O. M., Ettu, L. O. and Ezeh, J. C., (2013), , Direct Integration and Work Principle as New Approach in Bending Analyses of Isotropic Rectangular Plates

1341. Ibos, L., Marchetti, M., Boudenne, A., Datcu, S., Candau, Y. and Livet, J., (2006), , Infrared emissivity measurement device: principle and applications

1342. Ibrahim, A., Othman, M. Y., Ruslan, M. H., Mat, S. and Sopian, K., (2011), , Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors
      BIPV, PV/T,

1343. ICC, (2000), , ICC performance code for buildings and facilities
      moisture source for building envelope, performance-based building codes and standards, Resource: institutes, organization, associations,

1344. IEA, (2009), , IEA Key wold energy statistics

1345. IEA, (2010), , World energy outlook 2010

1346. IEA, (1990), , Annex XIV: Condensation and Energy. Volume 2: Guidelines & Practice and Volume 3: Catalog of Material Properties
      condensation and evaporation, guideline, measurement and instrumentation,

1347. IEA, (2011), , World Energy Outlook 2011
      energy,

1348. IEA, (1992), , Annex 23 : Multizone Air Flow Modelling, FINAL REPORT COMIS

1349. IEA PVPS, (2011), , World-wide overview of esign and smulation tools for hybrid PV systems

1350. IEA PVPS, (2009), , Annual Report 2009

1351. IEA/AIE, Blanchard, S. and Reppe, P., (2002), , World energy outlook 2002
      energy, surveys, reviews, statistics,

1352. IEA-PVPS, (2008), , Trends in photovoltaic applications-Survey report of selected IEA countries between 1992 and 2007

1353. IEA-PVPS, (2007), , Status of photovoltaic power in Canada - 2006

1354. IEA-PVPS, (2010), , Trends in photovoltaic applications survey report of selected iea countries between 1992 and 2009

1355. IICRC, (0), , The iicrc s500 standard and reference guide for professional water damage restoration
      fungi: remediation, treatment, prevention,

1356. Iliescu, S., (2000), , A case-based reasoning approach to the designing of building envelopes
      envelope, envelope design, Fazio's student: thesis,

1357. Il''inskii, M., (1965), , Water vapor transfer coefficients for calculating the moisture conditions in walls
      measurement: vapor diffusion properties, WVT,

1358. ILO, (2001), , Report
      windows, doors, fenestration,

1359. Immonen, J., Meklin, T., Taskinen, T., Nevalainen, A. and Korppi, M., (2001), , Skin-prick test findings in students from moisture- and mould-damaged schools: A 3-year follow-up study
      building types, fungi: health effects, fungi: mycology studies, culturing,

1360. Imrak, C. E. and Gerdemeli, I., (2007), , A numerical method for clamped thin rectangular plates carrying a uniformly distributed load

1361. Imrak, C. E. and Gerdemeli, I., (2007), , An exact solution for the deflection of a clamped rectangular plate under uniform load

1362. Inculet, D. and D. Surry, (1995), , Simulation of wind-driven rain and wetting patterns on buildings
      simulation: wind-driven rain, wind driven rain, wind-driven rain: CFD models,

1363. Inculet, D. and D. Surry, (1997), , Optimum vent locations for partially-pressurized rainscreens
      rainscreen, pressure equalized rainscreen principle, wind driven rain,

1364. Inculet, D., Surry, D. and Davenport, A.G, (2001), , An experimental study of pressure gradients and their implications for the design of pressure-moderated rainscreens
      rainscreen, pressure equalized rainscreen principle, wind driven rain,

1365. Industry Canada,, (2005), , Technology roadmap: lumber and value-added wood products
      wood, lumber, timber, wood: engineered products,

1366. Infraspection Institute, (2008), , Standard for Infrared Inspection of Building Envelopes

1367. Infraspection Institute, (0), , Guideline for Measuring Distance/Target Size Values for Quantitative Thermal Imaging Cameras

1368. I?igo, A. C. and S. Vicente-Tavera, (2001), , Different degrees of stone decay on the inner and outer walls of a Cloister
      biodeterioration,

1369. INSPQ, (2002), , Health risks associated with the indoor presence of moulds
      fungi: health effects,

1370. Institute for Research in Construction / National Research Council Canada, (1998), , Establishing the protocol for measuring air leakage and air flow patterns in high-rise apartment buildings
      building: highrise, ventilation: airtightness, air leakage,,

1371. Institute for Research in Construction / National Research Council Canada, (1998), , Testing of air barrier systems for wood frame walls
      air barrier, wood frame houses and walls, wood structure,

1372. International Energy Agency, (1990), , Condensation and Energy, Guidelines and Practice, Vol 2
      energy, fungi: molds in buildings, guideline,

1373. International Wood Markets Research Inc, (2000), , Wood markets 2000 edition: the solid wood products outlook 2002 to 2006
      housing market, OSB - Oriented strandboard, wood panel, wood, lumber, timber,

1374. IPCC, (2001), , Climate change 2001: impacts, adaptation, and vulnerability
      climate change, global warming, weather, climates,

1375. IPCC, (2001), , Climate change 2001: the scientific basis
      climate change, global warming, weather, climates,

1376. IPCC, (2001), , Third Assessment Report - Climate Change 2001
      climate change, global warming, weather, climates,

1377. IPCC, (2007), , Fourth Assessment Report: Climate Change, 2007 (AR4)
      climate change, global warming,

1378. IRC, (1996), , Review of non-destructive test methods for assessing strength, serviceability and deterioration in buildings
      measurement and instrumentation, moisture damages and problems for buildings,

1379. IRC, (2004), , Mould in buildings: a workshop report now available
      fungi: assessment, sampling and analysis,

1380. IRC/NRC, (1992), , Building Science Insight '92 Effective and Efficient Lighting
      lighting, daylighting,

1381. IRCC, (1998), , Guidelines for the introduction of performance-based building regulations (discussion paper)
      performance-based building codes and standards,

1382. Irdi, G. A., Jones, J. R. and White, C. M., (2002), , Pollen and fungal spore sampling and analysis. Statistical evaluations
      fungi: assessment, sampling and analysis,

1383. IRENA, (2012), , Renewable energy technologies: cost analysis series, volume 1: power sector, solar photovoltaics

1384. Isaksson, C. and Karlsson, F., (2006), , Indoor climate in low-energy houses--an interdisciplinary investigation
      IAQ - indoor air quality,

1385. Isaksson, T. and Thelandersson, S., (2010), , Critical conditions for onset of mould growth under varying climate conditions

1386. Isbell, M. A., Stolzberg, R. J. and Duffy, L. K., (2005), , Indoor climate in interior Alaska: simultaneous measurement of ventilation
      ventilation: measurement,

1387. Ishaque, K. and Salam, Z., Yordanov, G. H., Midtg?rd, O. M. and Saetre, T. O., (2011), , An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE)

1388. Ishaque, K., Salam, Z. and Syafaruddin,, (2011), , A comprehensive MATLAB Simulink PV system simulator with partial shading capability based on two-diode model

1389. Ishaque, K., Salam, Z., Taheri, H. and Shamsudin, A., (2011), , A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model

1390. Ishaque, K., Salam, Z., Taheri, H. and Syafaruddin,, (2011), , Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model

1391. ISIAQ, (0), , International Society of Indoor Air Quality and Climate, TF1-1996
      IAQ - indoor air quality,

1392. Iskra, C. R., (2007), , Convective mass transfer between a hydrodynamically developed airflow and liquid water with and without a vapor permeable membrane
      HAM: theory and modelling,

1393. Islam, M., Fartaj, A. and Ting, D. S., (2004), , Current utilization and future prospects of emerging renewable energy applications in Canada
      country: Canada, Renewable energy,

1394. Ismail, K. A. R., Salinas, C. T. and Henriquez, J. R., (2008), , Comparison between PCM filled glass windows and absorbing gas filled windows
      windows, doors, fenestration,

1395. ISO, (1996), , ISO 9972, Thermal insulation -- Determination of building airtightness -- Fan pressurization method
      standards: International,

1396. ISO, (1995), , Guide to the expression of uncertainty in measurement
      mathematics: error analysis, uncertainty analysis,

1397. ISO, (2008), , ISO/IEC Guide 98-3/Supplement 1, Propagation of distributions using a Monte Carlo method

1398. ISO, (2000), , ISO 12570: Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature
      measurement: gravimetry for moisture content, standards: International,

1399. Issa, C. A. and Kmeid, Z., (2005), , Advanced wood engineering: glulam beams
      technology, wood: engineered products,

1400. Jacob, B., Ritz, B., Gehring, U., Koch, A., Bischof, W., Wichmann, H.E. and Heinrich, J., (2002), , Indoor exposure to molds and allergic sensitization
      fungi: exposure investigation, fungi: health effects,

1401. Jacob, T. R., Hadley, J. G., Bender, J. R. and Eastes, W., (1992), , Airborne glass fiber concentrations during installation of residential insulation
      IAQ: particulate, dust,, insulation,

1402. J?ger-waldau, A., Szab¨®, M., Scarlat, N. and Monforti-ferrario, F., (2011), , Renewable electricity in Europe

1403. Jaillon, L. and Poon, CS, (2009), , The evolution of prefabricated residential building systems in Hong Kong: A review of the public and the private sector

1404. Jain, P. C., (1988), , Estimation of monthly average hourly global and diffuse irradiation

1405. James, W. L., (2000), , Electric moisture meters for wood
      measurement: moisture content,

1406. Jamison, J. B., (1997), , Monotonic and cyclic performance of structrually insulated panel shear walls
      experiments and testing, wood panel,

1407. Jang, W., Healy, W. M. and Skibniewski, M. J., (2008), , Wireless sensor networks as part of a web-based building environmental monitoring system
      experiment: field testing and monitoring programs, measurement: wireless sensor network,

1408. Janinska, B., (2000), , Environmental requirements for fungi
      fungi: growth and growth model,

1409. Jankowska, E., Reponen, T., Willeke, K., Grinshpun, S. A. and Choi, K., (2000), , Collection of fungal spores on air filters and spore reentrainment from filters into air
      fungi: molds in buildings, fungi: spore, aerosol,

1410. Janson, C., Anto, J., Burney, P., Chinn, S., de Marco, R., Heinrich, J., Jarvis, D., Kuenzli, N., Leynaert, B., Luczynska, C., (2001), , The European community respiratory health survey: what are the main results so far?
      fungi: health effects,

1411. Janssen, H., (2002), , The influence of soil moisture transfer on building heat loss via the ground
      building: simulation of building processes,

1412. Janssen, H. and Roels, S., (2009), , Qualitative and quantitative assessment of interior moisture buffering by enclosures

1413. Janssen, H., Blocken, B. and Carmeliet, J., (2007), , Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation
      HAM hygrothermal simulation,

1414. Janssen, H., Blocken, B., Roels, S., Carmeliet, J., (2007), , Wind-driven rain as a boundary condition for HAM simulations: Analysis of simplified modelling approaches
      water, wind-driven rain: CFD models,

1415. Janssen, H., Carmeliet, J. and Hens, H., (2002), , The influence of soil moisture in the unsaturated zone on the heat loss from buildings via the ground
      thermal analysis and performance,

1416. Janssen, N. A. H., Hoek, G., Brunekreef, B., Harssema, H., Mensink, I. and Zuidhof, A., (1998), , Personal sampling of particles in adults: Relation among personal, indoor, and outdoor air concentrations
      fungi: assessment, sampling and analysis,

1417. Janssens, A., (1998), , Reliable control of interstitial condensation in lightweight roof systems, calculation and assessment methods
      condensation and evaporation,

1418. Janssens, A. and H. Hens, (1998), , Condensation risk assessment
      condensation and evaporation, moisture damages and problems for buildings, risk analysis,

1419. Jantunen, M. J., Hanninen, O., Katsouyanni, K., Knoppel, H., Kuenzli, N., Lebret, E., Maroni, M., Sram, R. and Zmirou, D., (1998), , Air pollution exposure in European cities: The "EXPOLIS" study
      fungi: aerobiology, dispersion of spores,, IAQ - indoor air quality,

1420. Janz, M., (1997), , Methods of measuring the moisture diffusivity at high moisture levels
      capillary theory, fungi: legal, law, litigation, insurance issues, measurement: moisture content, moisture transport in porous materials,

1421. Janz, M., (2001), , Technique for measuring moisture storage capacity at high moisture levels
      measurement: moisture content,

1422. Janz, M., (2000), , Moisture transport and fixation in porous materials at high moisture levels
      HAM: theory and modelling,

1423. Janz, M., Johannesson , B. F., (2001), , Measurement of the moisture storage capacity using sorption balance and pressure extractors
      Isotherm,

1424. Jaques, R., (1996), , Energy efficiency building standards project - review of embodied energy
      embodied energy, energy efficiency,

1425. Jaramillo, O. A., Perez-Raago, C. A., Arancibia-bulnes, C. A. and Estrada, C. A., (2008), , A flat-plate calorimeter for concentrated solar flux evaluation

1426. Jarvis, B. B., (1990), , Mycotoxins and indoor air quality
      facility management, fungi: components and products,

1427. Jaworski, M., (2014), , Thermal performance of building element containing phase change material (PCM) integrated with ventilation system ?An experimental study

1428. Jaworski, M., Lapka, P. and Furmanski, P., (2014), , Numerical modelling and experimental studies of thermal behaviour of building integrated thermal energy storage unit in a form of a ceiling panel

1429. JCHS, (2002), , State of the Nation's Housing: 2002
      building: residential, house, home, country: US, market, trend, future,

1430. JCHS, (2000), , State of the Nation's Housing: 2000
      country: US, market, trend, future,

1431. JCHS, (2001), , State of the Nation's Housing: 2001
      housing market,

1432. JCHS, (2006), , State of the Nation's Housing, 2006
      housing market,

1433. Jchs, , (2001), , State of the Nation's Housing: 2008

1434. Jefferson, M., (2005), , Sustainable energy development: performance and prospects
      energy, sustainability, environment,

1435. Jelle, B. P. and Breivik, C., (2012), , The path to the building integrated photovoltaics of tomorrow

1436. Jelle, P., Breivik, B. and R?kenes, C. D., (2012), , Building integrated photovoltaic products: A state-of-the-art review and future research opportunities

1437. Jeng, C. J., Kindzierski, W. B. and Smith, D. W., (2003), , Modeling entry of micron-sized and submicron-sized particles into the indoor environment
      particle transport, penetration of particulate, through walls,

1438. Jenkins,L.C., and B. S., Sierck, (2001), , Fungal genera identified from flooded wall cavities
      fungi: assessment, sampling and analysis, fungi: molds in buildings,

1439. Jensen, K. D., (2004), , Flow Measurements
      measurement and instrumentation,

1440. Jensen, L. K., Larsen, A., Molhave, L., Hansen, M. and Knudsen, B., (2001), , Health evaluation of volatile organic compound (VOC) emissions from wood and wood-based materials
      VOC: measurement and identification, wood, lumber, timber,

1441. Jensen, P. A., Todd, W. F., Davis, G. N. and Scarpino, P. V., (1992), , Evaluation of eight bioaerosol samplers challenged with aerosols of free bacteria
      fungi: assessment, sampling and analysis,

1442. Jentsch, M. F., Bahaj, A. S. and James, P. A. B., (2008), , Climate change future proofing of buildings--Generation and assessment of building simulation weather files
      climate change, global warming,

1443. Jeong, J., Firrantello, J. and Freih, J. D., (2008), , Feasibility of wireless measurements for semi-empirical multizone airflow model tuning
      measurement: wireless sensor network, ventilation: air flow models, multi zone model,

1444. Jernberg, P., Eriksson, B., and Abrahamsson, J., (1996), , Spectroscopic evaluation and inspection of environmentally friendly wood protection systems
      maintenance, inspection, and diagnose, measurement and instrumentation, wood, lumber, timber,

1445. JF Burrows Consulting, (2003), , Incompatible building materials
      material,

1446. Ji, J., Han, J., Chow, T., Yi, H., Lu, J., He, W. and Sun, W., (2006), , Effect of fluid flow and packing factor on energy performance of a wall-mounted hybrid photovoltaic/water-heating collector system
      BIPV, PV/T,

1447. Jia, M. Y., Koziel, J. and Pawliszyn, J., (2000), , Fast field sampling/sample preparation and quantification of volatile organic compounds in indoor air by solid-phase microextraction and portable gas chromatography
      measurement: SPME,

1448. Jim¨¦nez, M. J., Madsen, H. and Andersen, K. K., (2008), , Identification of the main thermal characteristics of building components using MATLAB
      mathematics, thermal analysis and performance,

1449. Jin, X., Li, S., Zhang, X., Qiu, T. and Cao, Y., (2008), , Analysis of uncertainty and error for solar heat gain test facility

1450. JIS, (2002), , A 1470-1, Test method of adsorption/desorption efficiency for building material to regulate indoor humidity-Part 1: Response Method of Humidity
      material,

1451. Jo, J. H. and Otanicar, T. P., (2011), , A hierarchical methodology for the mesoscale assessment of building integrated roof solar energy systems
      BIPV,

1452. Joel Makower and the editors of GreenBiz.com, (2009), , State of Green Business 2009

1453. Johannes, K., Virgone, J., Kuznik, F., Wang, X. and Haavi , T., (2010), , One dimensional benchmark based on PCM

1454. Johannesson, B., (2000), , Transport and sorption phenomena in concrete and other porous media
      concrete, Isotherm, sorption process: mathematical model,

1455. Johannesson, B., (2001), , Restrictions on the rate of absorption when evaluating sorption isotherms obtained using a micro-calorimetric technique
      Isotherm,

1456. Johannesson, B. and Janz, M., (2002), , Test of Four Different Experimental Methods to Determine Sorption Isotherms
      Isotherm,

1457. Johanning, E. (Ed), (1999), , Bioaerosols, fungi and mycotoxins: health effects, assessment, prevention and control
      building: commercial, office, fungi: components and products, fungi: health effects, fungi: indoor biocontamination -- health symptom, fungi: indoor biocontamination -- health symptom, IAQ - indoor air quality, IAQ: sick building syndrome, SBS,

1458. Johanning, E., Landsbergis, P., (2001), , Clinical findings related to indoor fungal exposure - review of clinic data of a specialty clinic
      fungi: health effects,

1459. Johansson, P., Samuelson, I., Ekstrand-tobin, A., Mj?rnell, K., Sandberg, P. I. and Sikander, E., (2005), , Microbiological growth on building materials - critical moisture levels. State of the art

1460. John, G., Clements-croome, D., Jeronimidis, G., (2005), , Sustainable building solutions: a review of lessons from the natural world
      sustainability, environment,

1461. Johnson, D., Alston, L. and Esmen, N., (2002), , Dry powder aerosol production using modified pitt-3 type acoustic generators
      fungi: aerobiology, dispersion of spores,, measurement and instrumentation,

1462. Jolliffe, I. T., (2002), , Principal component analysis, 2nd ed.
      PCA -- Principal component analysis,

1463. Jones, A. M. and Harrison, R. M., (2004), , The effects of meteorological factors on atmospheric bioaerosol concentrations--a review
      fungi: spore, aerosol,

1464. Jones, A.P, (1999), , Indoor air quality and health
      IAQ: Health,

1465. Jones, A.S. , A. S. J., (2000), , Image analysis applied for aerobiology
      fungi: spore, aerosol, mathematics: image processing,

1466. Jordan, B. A., Schmidt, E. L., Huelman, P. H., Krupa, S. V. and Mayer, B., (2004), , Deuterium as a novel tracer for determining moisture sources in building systems
      measurement and instrumentation,

1467. J?rgensen, F., Melikov, A. K., Popiolek, Z., Silva, M. C. G., (2004), , Total uncertainty of low velocity thermal anemometers for measurement of indoor air movements
      Indoor air movement-CFD, measurement: anemometer, low air velocity in room,

1468. Jose fernedez-seara, C. P., Dopazo, J. A., Fernandes, F. and Sousa, P. X. B., (2012), , Experimental analysis of a direct expansion solar assisted heat pump with integral storage tank for domestic water heating under zero solar radiation conditions

1469. Joshi, S. V. and Bokil, R. S., (2005), , Test standards for thermosyphon-type solar domestic hot water system: review and experimental evaluation

1470. Judkoff, R. D. and Neymark, J. S., (1995), , Building Energy Simulation Test (BESTEST) and Diagnostic Method. National Renewable Energy Laborator

1471. Jussila, J., Komulainena, H., Kosma, V., Pelkonen, J. and Hirvonen, M., (2002), , Inflammatory potential of the spores of Penicillium spinulosum isolated from indoor air of a moisture-damaged building in mouse lungs
      fungi and molds in buildings and their envelopes, fungi: health effects,

1472. Justnes, H., Bryhn-ingebrigtsen, K. and Rosvold, G. O., (1994), , Neutron radiography: An excellent method of measuring water penetration and moisture distribution in cementitious materials
      measurement: moisture content,

1473. Kaariainen, H., M. Rudolph, Schaurich, D., Tulla, K., and Wiggenhauser, H., (2001), , Moisture measurements in building materials with microwaves
      measurement: moisture content,

1474. Kakizawa, Y., (2006), , Bernstein polynomial estimation of a spectral density
      mathematics: stochastical modeling and analysis,

1475. Kalagasidis, A.S. and Hagentoft, C., (2002), , Simulink modelling tool for HAM system analyses in building physics
      HAM: theory and modelling,

1476. Kalagasidis, S.A., (2004), , HAM-tools: An integrated simulation tool for heat, air and moisture transfer analyses in building physics
      HAM hygrothermal simulation,

1477. Kalagasidisa, A. S., Weitzmannb, P., Nielsen, T. R., Peuhkuri, R., Hagentoft, C. and Rode, C., (2007), , The International Building Physics Toolbox in Simulink
      HAM: computer models,

1478. Kalamees, T., (2006), , Hygrothermal criteria for design and simulation of buildings
      weather data and issues,

1479. Kalamees, T. and Vinha, J., (2003), , Hygrothermal calculations and laboratory tests on timber-framed wall structures
      experiment: hygrothermal performance, HAM: application,

1480. Kalamees, T. and Vinha, J., (0), , Estonian climate analysis for selecting moisture reference years for hygrothermal calculations
      weather data and issues,

1481. Kalamees, T., Korpi, M., Vinha, J. and Kurnitski, J., (2009), , The effects of ventilation systems and building fabric on the stability of indoor temperature and humidity in Finnish detached houses
      ventilation: mechanical systems (HVAC),

1482. Kalamees, T., Vinha, J., Kurnitski, J., (2006), , Indoor humidity loads and moisture production in lightweight timber-frame detached houses
      humidity on building performance,

1483. K?llblad, K., (1998), , Thermal models of buildings, determination of temperatures, heating and cooling loads. theories, models and computer programs.
      thermal analysis and performance,

1484. Kalogirou, S. A., (2004), , Solar thermal collectors and applications
      solar: utilization of solar energy,

1485. Kang, H. and R. E. Booker, (2002), , Variation of stress wave velocity with MC and temperature
      envelope materials, measurement: hygrothermal properties,

1486. Kapsis, K., Tzempelikos, A., Athienitis, A. K. and Zmeureanu, R. G., (2010), , Daylighting performance evaluation of a bottom-up motorized roller shade

1487. Karagiozis, A., (2002), , Building enclosure hygrothermal performance study phase I
      envelope performance, material properties: hygrothermal, PV/T, simulation of building process, ventilation - Air Infiltration and Ventilation in Buildings, Whole building HAM: models, WRB weather-resistive barrier, house wrap,

1488. Karagiozis, A., (2002), , A North American research approach to moisture design by modeling
      fungi: growth and growth model, HAM: application,

1489. Karagiozis, A., (1999), , Integrated approaches for moisture analysis
      moisture engineering,

1490. Karagiozis, A. and K¨ąnzel, H. M., (2001), , WUFI-ORNL/IBP - A North American Hygrothermal Mode
      HAM: computer models,

1491. Karagiozis, A. and M. Salonvaara, (1999), , Integrated hygrothermal performance of building envelopes and systems
      HAM: theory and modelling,

1492. Karagiozis, A. and Salonvaara, M., (2001), , Hygrothermal system-performance of a whole building
      envelope materials, HAM: theory and modelling, moisture control, moisture management, moisture engineering, Whole building HAM: models, Whole building HAM: theory and modeling,

1493. Karagiozis, A. C., (2001), , Advanced hygrothermal models and design models
      HAM: theory and modelling,

1494. Karagiozis, A. N., (2001), , Advanced hygrothermal modeling of building materials using MOISTURE-EXPERT 1.0
      HAM: application, HAM: computer models,

1495. Karagiozis, A. N., (2003), , Importance of moisture control in building performance
      BC leaky condos, HAM hygrothermal simulation,

1496. Karagiozis, A. N., (1998), , Applied moisture engineering
      experiment: facility on moisture in building envelope, HAM: theory and modelling, moisture engineering, rain penetration, water intrusion, validation of models,

1497. Karagiozis, A., Hadjisophocleous, G. and Cao,S, (1997), , Wind-driven rain distributions on two buildings
      CFD - computational fluid dynamics, simulation: wind-driven rain, wind driven rain, wind-driven rain: CFD models,

1498. Karagiozis, A., Kuenzel, H., Holm, A. and Desjarlais, A., (1999), , An educational hygrothermal model: WUFI-ORNL/IBP
      Education, training, HAM: computer models, PCA -- Principal component analysis, technology transfer,

1499. Karagiozis, A.N. and M.Salonvaara, (1995), , Influence of material properties on the hygrothermal performance of a high-rise residential wall
      building: residential, house, home, insulation, measurement: vapor diffusion properties, WVT,

1500. Karakaya, E., Hidalgo, A. and Nuur, C., (2014), , Diffusion of eco-innovations: A review

1501. Karava, P., Athienitis, A. K., Stathopoulos, T. and Mouriki, E., (2012), , Experimental study of the thermal performance of a large institutional building with mixed-mode cooling and hybrid ventilation

1502. Karava, P., Jubayer, C. M. and Savory, E., (2011), , Numerical modelling of forced convective heat transfer from the inclined windward roof of an isolated low-rise building with application to photovoltaic/thermal systems
      BIPV, PV/T,

1503. Karl, T. and Trenberth, K.E., (1999), , The human impact on climate
      climate change, global warming,

1504. Karoglou, M., Moropoulou, A., Krokida, M. K. and Maroulis, Z. B., (2007), , A powerful simulator for moisture transfer in buildings
      HAM: simplified models - simplification,

1505. Kartal, S. N., Ayrilmis, N. and Imamura , Y., (2007), , Decay and termite resistance of plywood treated with various fire retardants

1506. Kats, G., Alevantis, L., Berman, A., Mills, E. and Perlman, J., (2003), , The Costs and Financial Benefeits of Green Buildings: A Report to California's Sustainable Building Task Force [Report
      green building project,

1507. Katsman, R. and Becker, R., (2001), , A model for moisture-content evolution in porous building elements: treatment of irregular regions
      HAM: theory and modelling,

1508. Kauhanen, E., Harri, M., Nevalainen, A. and Nevalainen, T., (2002), , Validity of detection of microbial growth in buildings by trained dogs
      fungi: molds in buildings, fungi: mycology studies, culturing,

1509. Kayll, D. G., (2001), , The role of the building envelope professional in the aftermath of Vancouver's leaky condominium crisis
      BC leaky condos, BC leaky condos, building: condo / condominium,

1510. Kaynakli, O., (2012), , A review of the economical and optimum thermal insulation thickness for building applications

1511. Kehrer, M., Kunzel, H. and Sedlbauer, K., (2003), , Ecological insulation materials - does sorption moisture affect their insulation performance?
      HAM hygrothermal simulation, insulation, material properties: hygrothermal,

1512. Keller, H. S. R. and R¨ąden, H., (2004), , Indoor air pollution by microorganisms and their metabolites
      fungi: components and products,

1513. Keller, R. , Senkpiel, K. , Ohgke, H., (2001), , Use of MVOC measurements and odour perception as indicator of mould in indoor areas
      fungi: MVOC - microbial volatile organic compound,

1514. Kelley, S. J., Chiropolos, J. N. and Gustitus, D. A., (1993), , Window systems: repair versus replacement
      maintenance, inspection, and diagnose, rain penetration, water intrusion, ventilation: airtightness, air leakage,, windows, doors, fenestration,

1515. Kelly, K. M., (1982), , Indoor moisture effects on structure, comfort, energy, consumption, and health
      energy, humidity on building performance,

1516. Kelly, N.J., (1998), , Towards a design environment for buildingintegrated energy systems: the integration of electrical power flow modelling with building simulation
      BIPV, building subsystems: electrical, simulation: energy,

1517. Kemery, B. P. and Beausoleil©\morrison, I., (2012), , Optimal PV orientation and geographic dispersion: a study of 10 Canadian cities and 16 Ontario locations

1518. Kendrick, B., (1985), , The fifth kingdom
      fungi and molds in buildings and their envelopes,

1519. Kent, D., O. Handegord and R. Robson, (1966), , Study of humidity variations in Canadian buildings
      moisture in buildings, surveys, reviews, statistics,

1520. Kerem, Zohar; Jensen, Kenneth A.; Hammel, Kenneth E., (1999), , Biodegradative mechanism of the brown rot Gloeophyllum trabeum: evidence for an extracellular fenton reaction
      biodeterioration, fungi and molds in buildings and their envelopes,

1521. Kerestecioglu, A., Brahma, P. and Gu, L., (1990), , Simulation of combined heat moisture and contaminant transport in building science problems
      HAM: theory and modelling,

1522. Kerestecioglu, A., Swami, M. and Gu, L., (1989), , Combined heat and moisture transfer in buildings and structures
      HAM hygrothermal simulation, simulation of building process,

1523. Kern, E. C. and Russell., M. C., (1978), , Combined photovoltaic and Thermal Hybrid Collector Systems
      PV/T,

1524. Kessel, W., (2002), , Measurement uncertainty according to ISO/BIPM-GUM

1525. Kessentini, H., Capdevila, R., Castro, J., Oliva, A. and Bouden, C., (2014), , Three dimensional heat transfer analysis of combined conduction and radiation in honeycomb transparent insulation

1526. Khalil, M., (1973), , The Design, Development and Optimization of Mechanical Connection Systems in Sandwich Panel Construction
      Fazio's student: thesis,

1527. Khalil, S. A., Shaffie, A. M., (2013), , A comparative study of total, direct and diffuse solar irradiance by using different models on horizontal and inclined surfaces for Cairo, Egypt

1528. Khan, N., Su, Y. and Riffat, S. B., (2008), , A review on wind driven ventilation techniques

1529. Kharin, V. M., G. V. Agafonov, et al., (2001), , Kinetics of hygrothermal treatment of capillary porous materials
      HAM: theory and modelling, moisture transport in porous materials,

1530. Kieper, G. W. Caemmerer, and A. Wagner, (1976), , A new diagram to evaluate the performance of building construction with a view to water vapor diffusion
      HAM: simplified models - analytical methods,

1531. Kildes?, J., W¨ąrtz, H., Nielsen, K. F., Kruse, P., Wilkins, K., Thrane, U., Gravesen, S. and Nielsen, P. A., (2003), , Determination of fungal spore release from wet building materials
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

1532. Kildes?, J., W¨ąrtz, H., Nielsen, K. F., Wilkins, C. K., Gravesen, S., Nielsen, P. A., Thrane, U. and Schneider, T., (2000), , The release of fungal spores from water damaged building materials
      fungi: molds in buildings, fungi: spore, aerosol,

1533. Kildes?, P. K., Madsen, H. W. and Wilkins, K., (2002), , Fungal spores from wet gypsum boards relationship between release and age of culture
      envelope materials, fungi: damage to buildings, fungi: spore, aerosol,

1534. Kilpelainen, M., Terho, E.O., Helenius, H. and Koskenvuo, M., (2001), , Home dampness, current allergic diseases, and respiratory infections among young adults
      fungi: moisture damaged house -- indoor microbial concentrations,

1535. Kim, J. K., Kim, H.K. and Cho, Y., (2008), , A user-oriented contents recommendation system in peer-to-peer architecture
      technology,

1536. Kim, J. T. and Todorovic, M. S., (2013), , Tuning control of buildings glazing's transmittance dependence on the solar radiation wavelength to optimize daylighting and building's energy efficiency

1537. Kim, S ., Seol, H., Ikuma, L. H. and Nussbau, M. A., (2008), , Knowledge and opinions of designers of industrialized wall panels regarding incorporating ergonomics in design

1538. Kim, Y. and Seo, T., (2007), , Thermal performances comparisons of the glass evacuated tube solar collectors with shapes of absorber tube

1539. Kimura, K., (1999), , Solar architecture for the happiness of mankind
      solar: utilization of solar energy,

1540. King N. and Auger, P., (2002), , Indoor air quality, fungi, and health - How do we stand?
      fungi: health effects,

1541. King, B., (2000), , Engineering, alternative materials, and sustainability
      building codes and standards, envelope materials,

1542. Kintner-meyer, M. and Brambley, M., (2002), , Pros & cons of wireless
      measurement and instrumentation, measurement: wireless sensor network,

1543. Klamer, M., Morsing, E. and Husemoen, T., (2004), , Fungal growth on different insulation materials exposed to different moisture regimes
      insulation,

1544. Kleinfeld Technical Services Inc., (2004), , IR for detection of Exterior wall moisture and delamination. A Case study and comparison to FEA predictions
      Infrared thermography (IRT),

1545. Klemm, A. J., Klemm, P., Rozniakowski, K. and Galbraith, G., (2002), , Non-contact methods of measuring moisture concentration in external layers of building partitions. I--The influence of geometrical microstructure on the kinetics of moisture condensation on glass surfaces
      measurement: laser, measurement: moisture content,

1546. Klems, J. H., Finlayson, E. U., Olsen, T. H., Banks, D. W. and Pallis, J. M., (1999), , Toward a virtual building laboratory
      building,

1547. Klobut, K. and Siren, K., (1994), , Air flows measured in large openings in a horizontal partition
      Indoor air movement,

1548. Knopp, T., (2003), , Finite-element simulation of buoyancy-driven turbulent flows
      buoyancy air flow, Indoor air movement-CFD, mathematics: numerical method, finite difference, finite element,

1549. Knowles, R. L., Ratti, C., Raydan, D. and Steemers, K., (2003), , The solar envelope: its meaning for energy and buildings, Building form and environmental performance: archetypes, analysis and an arid climate
      envelope, Renewable energy: solar, solar energy, radiation, technology,

1550. Koch, A., Heilemann, K.J., Bischof, W., Heinrich, J. and Wichmann, H.E, (2000), , Indoor viable mold spores - a comparison between two cities, Erfurt (eastern Germany) and Hamburg (western Germany)
      fungi: assessment, sampling and analysis, fungi: molds in buildings,

1551. Ko?¨Ş, J., Mad¨§ra, J., ?erny, R., (2014), , Robert Cern? Generation of a critical weather year for hygrothermal simulations using partial weather data sets

1552. Kohler, N. and Hassler, U., (2002), , The building stock as a research object
      building types, building: simulation of building processes, country: Europe, life cycle assessment (LCA), research, funding, surveys, reviews, statistics,

1553. Kohonen, R., (1991), , Modeling and calculating moisture transfer in building materials
      HAM hygrothermal simulation,

1554. Kokko, E. et al, (1991), , Moisture physical behaviour of wooden structures
      wood frame houses and walls, wood structure,

1555. Kolbut, K. et al, (1991), , Simultaneous calculation of airflows, temperatures and contaminant concentrations in multi-zone buildings
      computer codes for energy calculations, coupled energy and airflow calculation,

1556. Kolokotroni, M., Littler, J., (1992), , Moisture Movement : A study using tracer gas techniques and CFD modelling
      Indoor air movement-CFD, tracer gas method for measuring air exchange,

1557. Kolokotsa, D., Rovas, D., Kosmatopoulos, E. and Kalaitzakis, K., (2011), , A roadmap towards intelligent net zero- and positive-energy buildings

1558. Komulainen, J., Lu, X., Hakkarainen, H., Weckstr?m, A., Viljanen, M. and S. Liukkonen, (2003), , Diffusion of some MVOCs through building moisture barriers
      fungi: MVOC - microbial volatile organic compound, VOC transport,

1559. Koniorczyk, M., Gudmundsson, K., Johannesson , G., (2009), , Sampling and analysis of natural isotopes in moisture transport from porous materials: applications to capillary suction
      measurement: moisture content,

1560. Kontopidis, T., (1992), , Control of rain penetration through pressurized cavity walls
      cavity wall, rain penetration, water intrusion,

1561. Kontopidis, T., Reddy, M. S. and Fazio, P., (1993), , Potential of rain screen walls to prevent rain penetration: pressurized cavity principle
      rain penetration, water intrusion, rainscreen, pressure equalized rainscreen principle,

1562. Koo, S.Y., Yeo, M.S. and Kim, K.W., (2010), , Automated blind control to maximize the benefits of daylight in buildings
      windows, doors, fenestration,

1563. Koptyug, I. V., Kabanikhin, S. I., Iskakov, K. T., Fenelonov, V. B., Khitrina, L. Y., Sagdeev, R. Z. and Parmon, V. N., (2000), , Quantitative NMR imaging study of mass transport in porous solids during drying
      measurement: moisture content,

1564. Koronthalyova, O., Mihalka, P. and Matiasovsky, P., (0), , Model for whole HAM-transfer simulation in room

1565. Koroth, S., (1997), , Evaluation and improvement frost durability of clay bricks
      brick, masonry, mortar, brick, masonry, mortar, durability: building envelope, Fazio's student: thesis,

1566. Korpi, A., (2001), , Fungal volatile metabolites and biological responses to fungal exposure
      fungi: indoor biocontamination -- health symptom, fungi: MVOC - microbial volatile organic compound,

1567. Korpi, A. Pasanen,A.L. and P. Pasanen, (1998), , Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions
      fungi and molds in buildings and their envelopes, fungi: growth and growth model, fungi: MVOC - microbial volatile organic compound,

1568. Korpi, A., Kasanen, J.-P, Alarie, Y., Kosma, V. and Pasanen, A-L, (1999), , Sensory irritating potency of some microbial volatile organic compounds (MVOCs) and a mixture of five MVOCs
      fungi: health effects, fungi: MVOC - microbial volatile organic compound,

1569. Korpi, A., Pasanen, A. and Viitanen, H., (1999), , Volatile metabolites of Serpula lacrymans, Coniophora puteana, Poria placenta, Stachybotrys chartarum and Chaetomium globosum
      fungi: components and products, fungi: MVOC - microbial volatile organic compound, fungi: Stachybotrys,

1570. Korpi, A., Pasanen, J., Pasanen, A., (2001), , Sensory irritation of microbially produced volatile organic compounds in mice during repeated exposures
      fungi: health effects, fungi: MVOC - microbial volatile organic compound,

1571. Korpia, A., Pasanena, A., Pasanena, P. and Kalliokoskia, P., (1997), , Microbial growth and metabolism in house dust
      fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound,

1572. Korsgaard, V., Rode, C. and Bunch-Nielsen, T., (1996), , The self-drying concept for flat roofs
      drying potential of building envelope, experiment: laboratory, roof,

1573. Koskinen, O.M., Husman, T.M., Meklin, T.M. and Nevalainen, A.I, (1999), , The relationship between moisture or mould observations in houses and the state of health of their occupants
      fungi: health effects,

1574. Kosny, J. and Kossecka, E., (2002), , Multi-dimensional heat transfer through complex building envelope assemblies in hourly energy simulation programs

1575. Kosny, J., Desjarlais, A. and , J.Christian, (1999), , Whole wall rating/label for structural insulated panel: steady-state thermal analysis

1576. Kosny, J., Shrestha, S., Stovall, T. and Yarbrough, D., (2010), , Theoretical and experimental thermal performance analysis of complex thermal storage membrane containing bio-based phase-change

1577. Kosorica, V., Wittkopfa, S. and Huanga, Y., (2011), , Testing a design methodology for building integration of photovoltaics (PV) using a PV demonstration site in Singapore

1578. Kotey, N. A., Wright, J. L., Collins, M. R. and Barnaby, C. S., (2009), , Solar gain through windows with shading devices: simulation versus measurement

1579. Kotey, N.A., (2009), , Measurements and Models Related to Solar Optics in Windows with Shading Devices

1580. Kottek, M., Grieser, J., Beck, C., Rudolf, B. and Rubel, F., (2006), , World Map of the K?ppen-Geiger climate classification updated
      weather, climates,

1581. Kousa, A., Oglesby, L., Koistinena, K., K¨ąnzlib, N. and Jantunena, M., (2002), , Exposure chain of urban air PM2.5----associations between ambient fixed site, residential outdoor, indoor, workplace and personal exposures in four European cities in the EXPOLIS-study
      IAQ - indoor air quality, surveys, reviews, statistics,

1582. Kowalski, S. J. and Rybicki, A., (2004), , Drying induced stresses in a swelling porous wall
      material properties: hygrothermal,

1583. Kowalski, W. J., (2000), , Indoor mold growth: health hazards and remediation
      fungi and molds in buildings and their envelopes, fungi: health effects, fungi: molds in buildings, fungi: remediation, treatment, prevention, IAQ - indoor air quality,

1584. Kowalski, W., Bahnfleth, W. and Musser, A., (2003), , Modeling Immune Building Systems for Bioterrorism Defense
      fungi: spore, aerosol,

1585. Koyunbaba, B. K., Yilmaz, Z. and Ulgen, K., (2011), , An approach for energy modeling of a building integrated photovoltaic (BIPV) Trombe wall system
      BIPV, PV/T,

1586. Kozak, R. A. and Cohen, D. H., (1995), , Assessment of the attitudes and perceptions of architects and structural engineers towards the environmental impact of structural material use in commercial construction
      construction industry, environmental impacts and issues,

1587. Koziel, J., Jia, M. Y. and Pawliszyn, J., (2000), , Air sampling with porous solid-phase microextraction fibers
      measurement: SPME,

1588. Koziel, J.A. and Novak, I., (2002), , Sampling and sample-preparation strategies based on solid-phase microextraction for analysis of indoor air
      measurement: SPME,

1589. Kozlowski, D., (2003), , Mold: Behind the hype
      fungi and molds in buildings and their envelopes,

1590. Kreja, L. and Seidel, H., (2002), , Evaluation of the genotoxic potential of some microbial volatile organic compounds (MVOC) with the comet assay, the micronucleus assay and the HPRT gene mutation assay
      fungi: components and products, fungi: health effects, fungi: indoor biocontamination -- health symptom, fungi: MVOC - microbial volatile organic compound,

1591. Krogstad, N. V. and Weber, R. A., (1999), , Evaluation of moisture problems in exterior wall assemblies
      moisture in buildings,

1592. Krus, M. and Holm A., (0), , Simple methods to approximate the liquid transport coefficients describing the absorption and drying
      liquid transport, moisture diffusivity, measurement: hygrothermal properties, measurement: vapor diffusion properties, WVT,

1593. Krus, M. and Vik, T.A, (1999), , Determination of hygric material properties and calculation of the moisture balance of wooden prisms
      measurement: thermal properties,

1594. Krus, M., Sedlbauer, K., Zillig, W. and Kunzel, H.M, (2001), , A new model for mould prediction and its application on a test roof
      experiments and testing, fungi: growth and growth model, roof,

1595. Kudder, R.J. and Erdly, J. L. (Eds.), (1998), , Water leakage through building facades
      rain penetration, water intrusion, renovation, repair, maintenance, surveys, reviews, statistics, water penetration,

1596. Kuhn, D. M. and Ghannoum, M. A., (2003), , Indoor mold, toxigenic fungi, and Stachybotrys chartarum: infectious disease perspective
      fungi: components and products, fungi: health effects, fungi: Stachybotrys,

1597. Kuhn, T. E., (2006), , Solar control: Comparsion of two new systems with the state of the art on the basis of a new general evaluation method for facades with venetian blinds or other solar control systems

1598. Kuhn, T. E., (2006), , Solar control: A general evaluation method for facades with venetian blinds or other solar control systems

1599. Kulmala, I. Antti Souto, and Vesa M?kip??, (2000), , Development of safe repair methods for water damaged buildings
      biodeterioration, fungi: molds in buildings, maintenance, inspection, and diagnose, maintenance, inspection, and diagnose, moisture damages and problems for buildings,

1600. Kulmala, M., Asmi, A. and Pirjola, L., (1999), , Indoor air aerosol model: the effect of outdoor air, filtration and ventilation on indoor concentrations
      fungi: aerobiology, dispersion of spores,,

1601. K¨ąlt¨ąr, S. and T¨ąrkeri, N., (2012), , Assessment of long term solar reflectance performance of roof coverings measured in laboratory and in field

1602. Kumar, R. and Rosen, M. A., (2011), , A critical review of photovoltaic¨Cthermal solar collectors for air heating
      PV/T,

1603. Kumaran, K., Lackey, J., Normandin, N., Reenen, v. and Tariku, F., (2002), , Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction - Hygrothermal Properties of Several Building Materials
      material properties: hygrothermal, measurement: hygrothermal properties, WRB weather-resistive barrier, house wrap,

1604. Kumaran, M. K., (1996), , Final Report, IEA-Annex 24, Task 3: Material Properties
      HAM: material properties,

1605. Kumaran, M. K., (1996), , Taking guess work out of placing air/vapor barriers
      air barrier, vapor barrier, vapor retarder,

1606. Kumaran, M. K., (1999), , Moisture diffusivity of building materials from water absorption measurements
      Isotherm, measurement: vapor diffusion properties, WVT,

1607. Kumaran, M. K., (1996), , Vapor transport characteristics of mineral fiber insulation from heat flow meter measurements
      measurement: vapor diffusion properties, WVT,

1608. Kumaran, M. K., (1991), , Application of gamma-ray spectroscopy for determination of moisture distribution in insulating materials
      measurement: moisture content,

1609. Kumaran, M. K., (2005), , A thermal and moisture transport property data base for common building and insulating materials (final report)
      material properties: hygrothermal,

1610. Kumaran, M. K., Mitalas, G. P., Kohonen, R. and Ojanen, T., (1989), , Moisture transport coefficient of pine from gamma ray absorption measurements
      measurement: hygrothermal properties, measurement: vapor diffusion properties, WVT,

1611. Kumaran, M.K., (2002), , Protecting the long-term performance of building envelope components
      HAM: computer models,

1612. Kumaran, M.K.; Mukhopadhyaya, P.; Cornick, S.M.; Lacasse, M.A.; Maref, W.; Rousseau, M.Z.; Nofal, M.; Quirt, J.D.; Dalgliesh, W.A, (2002), , A methodology to develop moisture management strategies for wood-frame walls in North America: application to stucco-clad walls
      HAM: theory and modelling, moisture control, moisture management,

1613. Kumaran, MK., Mukhopadhyaya, P. and Normandin, N., (2006), , Determination of equilibrium moisture content of building materials: some practical difficulties
      material properties: hygrothermal,

1614. Kung, H. K., DU, T. C. and Weng, C.H., (1999), , Applying object-oriented database technologies in concurrent design processes
      design,

1615. Kuntz, M. and van_Mier, J. G. M., (1997), , Field evidences and theoretical analysis of the gravity-driven wetting front instability of water runoffs on concrete structure
      Fa?ade wetting, water runoff, soiling,

1616. Kunzel, H. M., (1998), , More moisture load tolerance of construction assemblies through the application of a smart vapor retarder
      drying potential of building envelope, interstial condensation, lightweight building components, smart vapor retarder, vapor barrier, vapor retarder,

1617. Kunzel, H. M., (1998), , The smart vapor retarder: an innovation inspired by computer simulations
      smart vapor retarder,

1618. Kunzel, H. M., (2000), , Moisture risk assessment of roof constructions by computer simulation in comparison to the standard Glaser-method
      HAM: computer models, HAM: simplified models - analytical methods, risk analysis, roof,

1619. Kunzel, H. M., (1998), , Effect of interior and exterior insulation on the hygrothermal behaviour of exposed walls
      HAM: application, insulation,

1620. Kunzel, H. M., (1998), , Smart vapor retarder: an innovation inspired by computer simulations
      HAM hygrothermal simulation, smart vapor retarder,

1621. K¨ąnzel, H. M., (1999), , Flexible vapor control solves moisture problems of building assemblies - smart retarder to replace the conventional PE-film
      smart vapor retarder, vapor barrier, vapor retarder,

1622. K¨ąnzel, H. M., Holm, A., Sedlbauer, K., Antretter, F. and Ellinger, M., (2004), , Moisture buffering effects of interior linings made from wood or wood based products
      Moisture buffering,

1623. K¨ąnzel, H. M., Holm, A., Zirkelbach, D. and Karagiozis, A. N., (2005), , Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope
      Whole building HAM,

1624. K¨ąnzel, H.M, (1995), , Simultaneous heat and moisture transport in building components. one- and two-dimensional calculation using simple parameters
      governing equations for heat and moisture transfer, HAM: computer models, HAM: theory and modelling, liquid transport, moisture diffusivity,

1625. K¨ąNZEL, H.M. and Kiessl, K., (1997), , Calculation of heat and moisture transfer in exposed building components
      HAM: theory and modelling, solar energy, radiation,

1626. Kupfer, K., (1900), , Material properties, measuring methods, applications
      measurement and instrumentation,

1627. Kurkinen, K. and Hagentoft, C., (2002), , Durability control by means of hygrothermal history in building components
      durability: building envelope, durability: materials and components, HAM hygrothermal simulation, service life prediction,

1628. Kurnitski, J., (2000), , Humidity control in outdoor-air-ventilated crawl spaces in cold climate by means of ventilation, ground covers and dehumidification
      attic, crawl space, ceiling,, ventilation - Air Infiltration and Ventilation in Buildings,

1629. Kurnitski, J., (2000), , Crawl space air change, heat and moisture behaviour
      attic, crawl space, ceiling,, moisture damages and problems for buildings,

1630. Kurnitski, J. and Matilainen, M., (2000), , Moisture conditions of outdoor air ventilated crawl spaces in apartment buildings in a cold climate
      attic, crawl space, ceiling,, experiment: field testing and monitoring programs,

1631. Kusuda, T., (2001), , Building environment simulation before desk top computers in the USA through a personal memory
      building: simulation of building processes, simulation of building process,

1632. Kusuda, T., (1999), , Early history and future prospects of building system simulation
      building: simulation of building processes, history, simulation of building process,

1633. Kuznik, F. and Virgone, J., (2009), , Experimental assessment of a phase change material for wall building use

1634. Kuznik, F., David, D., Johannes, K. and Roux, J., (2011), , A review on phase change materials integrated in building walls

1635. Kuznik, F., Virgone, J. and Noel, J., (2008), , Optimization of a phase change material wallboard for building use

1636. Kvande, T. and Liso, K.R., (2009), , Climate adapted design of masonry structures
      climate change, global warming, design,

1637. Kvande, T., Time, B. and Waldum, A. M., (2002), , Capacity of rendering systems to resist rain penetration
      rain penetration, water intrusion,

1638. Kwiatkowski, J., Woloszyn, M., Roux, J., (2009), , Modelling of hysteresis influence on mass transfer in building materials

1639. L, C. and H, D. D., (2006), , Analysis of Montreal 30-year weather data to select loading conditions for large-scale tests on wall panel systems
      weather data and issues,

1640. L, W., (1993), , Studies of water vapor transport and sorption in wood

1641. La, D., Dai, Y. J., Li, Y., Wang, R. Z. and Ge, T. S., (2009), , Technical development of rotary desiccant dehumidification and air conditioning: A review

1642. Lacasse, M. A. and D. J. Vanier, (1999), , Durability of Building Materials and Components 8
      durability: building envelope, durability: materials and components, envelope, life cycle assessment (LCA),

1643. Lacasse, M. A., O'connor, T. J., Nunes, S. and Beaulieu., P., (2003), , Report from task 6 of MEWS project -- experimental assessment of water penetration and entry into wood-frame wall specimens, - final report
      country: Canada, envelope performance, experiment: laboratory, rain penetration, water intrusion, wood frame houses and walls, wood structure,

1644. Lacey, J., (1993), , Inhalation hazards of fungal spoilage
      fungi: health effects,

1645. Lackey, J.C., R.G. Marchand, and M.K. Kumaran, (1997), , A logical extension of the ASTM Standard E96 to determine the dependence of water vapor transmission on relative humidity
      standards discussion,

1646. Laflamme, A. and Miller, J. D., (1992), , Collection of spores of various fungi by a Reuter centrifugal sampler
      fungi: assessment, sampling and analysis,

1647. Lagus, P. L. and Grot, R. A., (1999), , An investigation into the migration of propane in confined spaces
      Indoor air movement-CFD,

1648. Lahme, J. R. a., Christensen, N. U., Heiselberg, ., Hansen, M. and Grau, K., (2009), , Numerical method for calculating latent heat storage in constructions containing phase change material

1649. Lahoucine, C.O., Sakashita, H. and Kumada, T., (2004), , Simultaneous Determination of Thermophysical Properties Using a Thermistor, Part 1: Numerical Model
      measurement: thermal properties,

1650. Lahtinen, M., Huuhtanen, P., K?hk?nen, E. and Reijula , K., (2002), , Psychosocial dimensions of solving an indoor air problem
      experiment: survey and questionnaire, IAQ - indoor air quality,

1651. Lai, A. C. K., (2002), , Particle deposition indoors: a review
      IAQ: particulate, dust,, particle transport, penetration of particulate, through walls,

1652. Laks, P. E., G. M. Larkin, and E. Keranen, (1999), , Mold and decay resistance of common sheathing materials
      durability: materials and components, OSB - Oriented strandboard, sheathing,

1653. Laks, P.E., Richter, D.L., Larkin, G.M, (2002), , Fungal susceptibility of interior commercial building panels
      fungi: damage to buildings, fungi: molds in buildings, OSB - Oriented strandboard,

1654. Lampert, C. M., (1981), , Heat mirror coatings for energy conserving windows
      windows, doors, fenestration,

1655. Langmans, J., Nicolai, J. L. a., Klein, R. and Roels, S., (2012), , A quasi-steady state implementation of air convection in a transient heat and moisture building component model

1656. Lansley, P., (2002), , Who should set the research agenda? Reflections on the Fairclough Review
      built environment, research, funding,

1657. Laouadi, A., (2009), , Thermal modeling of shading devices of windows,

1658. Lappalainen, S., K?hk?nen, E., Loikkanen, P., Palom?ki, E., Lindroos, O. and Reijula, K., (2001), , Evaluation of priorities for repairing in moisture-damaged school buildings in Finland
      fungi: molds in buildings, maintenance, inspection, and diagnose, moisture damages and problems for buildings,

1659. Larsen, T. O. and Frisvad, J. C., (1994), , A simple method for collection of volatile metabolites from fungi based on diffusive sampling from Petri dishes
      fungi: assessment, sampling and analysis,

1660. Larsson, L., (1994), , Determination of microbial chemical markers by gas chromatography-mass spectrometry - potential for diagnosis and studies on metabolism in situ
      fungi: components and products, measurement: GC-MS,

1661. Larsson, N., (2003), , Adapting to climate change in Canada
      climate change, global warming, country: Canada,

1662. Larsson, N.K. and R.J. Cole, (2001), , Green Building Challenge: the development of an idea
      sustainability, environment,

1663. l'Association provinciale des constructeurs d'habitations du Qu¨¦bec (APCHQ), (0), , l'Association provinciale des constructeurs d'habitations du Qu¨¦bec (APCHQ)
      building, surveys, reviews, statistics,

1664. Lates, R., Visa, I. and Lapusan, C., (2008), , Mathematical Optimization of Solar Thermal Collectors Efficiency Function Using MATLAB

1665. Launder, B. E. and Spalding, D. B., (1974), , The numerical computation of turbulent flows
      CFD - computational fluid dynamics,

1666. Lawryk, N. and Chen, B., (2002), , Portable x-ray fluorescence spectrometry for measuring multiple airborne metals: a NIOSH screening method under development
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

1667. Lawton, M. D., (1998), , Moldy houses - building science lessons from the Wallaceburg project
      fungi: health effects, fungi: molds in buildings, PV/T, Whole building HAM: humidity level in houses,

1668. Lawton, M. D., (1998), , Convective processes in loose-fill attic insulation--metering equipment
      insulation, measurement and instrumentation,

1669. Lawton, M. D., (1999), , Reacting to durability problems with Vancouver buildings
      durability: building envelope, rain, rain penetration, water intrusion,

1670. Lawton, M. D., Brown, W. C. and Lang, A. M., (1999), , Stucco-clad wall drying experiment
      drying potential of building envelope, experiment: hygrothermal performance,

1671. Lawton, M. D., R. E. Dales, and J. White, (1998), , The influence of house characteristics in a Canadian community on microbiological contamination
      biodeterioration, fungi: moisture damaged house -- indoor microbial concentrations, fungi: mold in walls -- indoor microbial concentrations, fungi: molds in buildings, Whole building HAM: humidity level in houses, Whole building HAM: models,

1672. Lawton, M., Meklin, T., (1999), , Rain penetration control - applying current knowledge (rpc-00)
      cavity wall, rain penetration, water intrusion, rainscreen, pressure equalized rainscreen principle,

1673. Lawton, M.D. and D. L. Scott, (1995), , EASE demonstration project: APCHQ's advanced house
      air barrier, cladding, siding, veneer, envelope design, housing project, WRB weather-resistive barrier, house wrap,

1674. Lawton, M.D. and D. L. Scott, (1993), , Testing of air barrier construction details
      air barrier,

1675. Lawton, M.D., Brown, W.C., Lenardo, B., and Poirier, G.F, (1998), , An evaluation guide for performance assessment of air barrier
      air barrier,

1676. Layzell, J. and Ledbetter, S., (1999), , FMEA applied to cladding systems - reducing the risk of failure
      cladding, siding, veneer, mathematics, risk analysis,

1677. Leblanc, R., (1991), , Airtightness tests on components used to join different or similar materials of the building envelope
      ventilation: airtightness, air leakage,,

1678. Ledger, B., (1999), , Canada Life environmental room
      envelope design, IAQ - indoor air quality, ventilation: infiltration of buildings,

1679. Ledger, B., (1999), , Buildings: counting on green
      green building, sustainable building,

1680. Lee, E., Feigley, C. E., Khan, J. A. and Hussey, J. R., (2006), , The effect of temperature differences on the distribution of an airborne contaminant in an experimental room
      IAQ: particulate, dust,,

1681. Lee, E.S., (1998), , Spectrally selective glazings
      energy efficiency, solar energy, radiation, windows, doors, fenestration,

1682. Lee, K. S., Bartlett, K. H., Brauer, M., Stephens, G. M., Black, W. A. and Teschke, K., (2004), , A field comparison of four samplers for enumerating fungal aerosols I. Sampling characteristics
      fungi: assessment, sampling and analysis,

1683. Lee, K., Black, W., Brauer, M., Stephens, G., Hsieh, J. and Bartlett, K., (2002), , A field comparison of methods for enumerating airborne fungal bioaerosols
      fungi: assessment, sampling and analysis,

1684. Lee, S., Kim, S. H. and Breuil, C., (2002), , The use of the green fluorescent protein as a biomarker for sapstain fungi
      fungi: assessment, sampling and analysis,

1685. Lehtonen, M., Reponen, T. and Nevalainen, A., (1993), , Everyday activities and variation of fungal spore concentrations in indoor air
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

1686. Lemonick, M.D, (1998), , Termites from hell
      biodeterioration, termites,

1687. Lenton, T. M., Held, H., Kriegler, E., Hall, J. W., Lucht, W., Rahmstorf, S. and Schell, .H.J., (2008), , Tipping elements in the Earth's climate system
      climate change, global warming,

1688. Lenzen, M. and Collins, R. E., (1997), , Long-term field tests of vacuum glazing
      windows, doors, fenestration,

1689. Leon, M. A. and Kumar, S., (2007), , Mathematical modeling and thermal performance analysis of unglazed transpired solar collectors

1690. Leonard, C.A, (1988), , The effects of change orders on productivity
      Fazio's student: thesis,

1691. Lepper, M. and Jones, E., (2000), , Objective-based codes for wood frame construction
      objective-based codes, wood frame houses and walls, wood structure,

1692. Lerma, J. L., Cabrelles, M. and Portales, C., (2011), , Multitemporal thermal analysis to detect moisture on a building fa?ade
      PCA -- Principal component analysis,

1693. LeVan, S. L., (1998), , Benefits from wood engineering research
      market, trend, future, material properties: hygrothermal, research, funding, wood, lumber, timber, wood: engineered products,

1694. Levermore, G., C. Sanders, J. Dewsbury, A. Gadian and P. Laycock, (2001), , Inaccuracies in standard meteorological low-speed wind data
      mathematics: regression analysis / fitting, wind,

1695. Levetin, E. and Horner, W. E., (2002), , Fungal aerobiology: Exposure and measurement
      fungi: aerobiology, dispersion of spores,,

1696. Levin, H., (2002), , Indoor Air 2002, Proceedings: 9th International Conference on Indoor Air Quality and Climate Monterey
      IAQ - indoor air quality, sealant,

1697. Levin, P., (2000), , Moisture in constructions with loose-fill insulation and no vapour barrier
      experiment: laboratory, insulation, moisture in buildings, WRB weather-resistive barrier, house wrap,

1698. Levy, S., (1941), , Square plates with clamped edges under normal pressure producing large deflectionsˇŻ

1699. Lewandowski, W. M. and Lewandowska-iwaniak, W., (2014), , The external walls of a passive building: A classification and description of their thermal and optical properties

1700. Li, H. and Shen, Q., (2002), , Supporting the decision-making process for sustainable housing
      building: residential, house, home, sustainability, environment,

1701. Li, H., Chen, X., Ouyang, Q. and Zhu, Y., (2007), , Wavelet analysis on fluctuating characteristics of airflow in building environments
      IAQ - indoor air quality,

1702. Li, Q., Rao, J. and Fazio, P., (2009), , Development of HAM tool for building envelope analysis

1703. Li, Y. M., (2007), , Improved uncertainty for a modified commercial emissometer

1704. Li, Y., Fazio, P. and Rao, J., (2012), , Numerical investigation of the influence of room factors on HAM transport in a full-scale experimental room

1705. Li, Z., (2007), , Characteristics of buoyancy driven natural ventilation through horizontal openings
      buoyancy air flow,

1706. Li, Z., (2006), , A new life cycle impact assessment approach for buildings
      life cycle assessment (LCA),

1707. Light, E. N., (2002), , Mold remediation: how complex should it be?
      fungi: remediation, treatment, prevention,

1708. Lim, B. B. P., (1989), , Control of the External Environment of Building

1709. Lin, W. and Li, C., (1998), , Effect of sampling time and flow rates on the bioefficiency of three fungal spore sampling methods
      fungi: assessment, sampling and analysis,

1710. Lin, W., Dalmazzone, D., F¨ąrst, W., Delahaye, A., Fournaison, L. and Clain, P., (2013), , Accurate DSC measurement of the phase transition temperature in the TBPB–water system

1711. Lin, X., Reponen, T. A., Willeke, K., Grinshpun, S. A., Foarde, K. K. and Ensor, D. S., (1999), , Long-term sampling of airbome bacteria and fungi into a non-evaporating liquid
      fungi: assessment, sampling and analysis,

1712. Lin, Y. and Zmeureanu, R., (2008), , Three-dimensional thermal and airflow (3D-TAF) model of a dome-covered house in Canada

1713. Lindgren, O., (1992), , Medical CT-scanners for non-destructive wood density and moisture content measurements
      measurement: moisture content,

1714. Lindley, D. V., (2006), , Understanding Uncertainty
      mathematics: error analysis, uncertainty analysis,

1715. Lindroos, O., Lappalainen, S., Reijula, K., (2001), , Concentrations of viable spores of fungi and actinomycetes in ventilation channels
      building subsystems: HVAC, fungi: molds in buildings,

1716. Lio, M. and Kesik, T., (1997), , Canadian wood-frame house construction
      wood frame houses and walls, wood structure,

1717. Lippiatt, B.C, (2002), , BEEs 2.0, building for environmental and economic sustainability-technical manual and user guide
      green building materials, life cycle assessment (LCA),

1718. Lis?, K. R., Kvande, T. and Thue, J. V., (2006), , Learning from experience -- An analysis of process induced building defects in Norway
      building: damage and failures,

1719. Lis?, K.R, (2001), , Effects of climate change on built environments
      built environment, climate change, global warming, country: Europe, green building project, moisture damages and problems for buildings, weather, climates,

1720. Liu, A. M. M., (1999), , Residential satisfaction in housing estates: a Hong Kong perspective
      building: residential, house, home, occupancy, occupants, residents, homeowner,

1721. Liu, D., (2002), , Air pollutant penetration through airflow leaks into buildings
      particle transport, penetration of particulate, through walls,

1722. Liu, D. and Nazaroff, W. W., (2003), , Particle penetration through building cracks
      IAQ: particulate, dust,,

1723. Liu, D. and Nazaroff, W. W., (2001), , Modeling pollutant penetration across building envelopes
      IAQ: particulate, dust,, particle transport, penetration of particulate, through walls,

1724. Liu, D. and Nazaroff, W.W., (2002), , Particle penetration through windows
      mathematics: Monte Carlo simulation method, particle transport, penetration of particulate, through walls, ventilation: airtightness, air leakage,, windows, doors, fenestration,

1725. Liu, D. L., and Nazaroff, W. W., (1999), , Modeling particle penetration through cracks in building envelopes
      fungi: aerobiology, dispersion of spores,,

1726. Liu, H., Jianga, J., (2007), , Flywheel energy storage--An upswing technology for energy sustainability
      energy,

1727. Liu, H., Saffir, H.S., and Sparks, P.R, (1989), , Wind damage to wood frame houses: problems, solutions, and research needs
      envelope damage, wind, wood frame houses and walls, wood structure,

1728. Liu, J., Aizawa, H. and Yoshino, H., (2004), , CFD prediction of surface condensation on walls and its experimental validation
      CFD - computational fluid dynamics, condensation and evaporation,

1729. Liu, J., Aizawa, Y. and Yoshino, H., (2005), , Experimental and numerical study on indoor temperature and humidity with free water surface
      humidity on building performance, Moisture buffering, Whole building HAM,

1730. Liu, S., Li, Y. and Zhang, Y., (2014), , Mathematical solutions and numerical models employed for the investigations of PCMs' phase transformations

1731. Liu, X., Zhai, Z., Facciola, N. A. and Miller, S. L., (2007), , Study of penetration of outdoor fine particles into nonresidential building with multizone simulation.
      IAQ: particulate, dust,,

1732. Lollini, R., Danza, L. and Meroni, I., (2010), , Energy efficiency of a dynamic glazing system
      windows, doors, fenestration,

1733. Long, C. M., Suh, H. H., Catalano, P. J. and Koutrakis, P., (2001), , Using time- and size-resolved particulate data to quantify indoor penetration and deposition behavior
      particle transport, penetration of particulate, through walls,

1734. Loomans, M., (1998), , The measurement and simulation of indoor air flow
      Indoor air movement-CFD, tracer gas method for measuring air exchange,

1735. Loomans, M. and A. Schijndel, (2002), , Simulation and measurement of the stationary and transient characteristics of the hot sphere anemometer
      measurement and instrumentation, measurement: anemometer, low air velocity in room,

1736. Lord, H. and Pawliszyn, J., (2000), , Evolution of solid-phase microextraction technology
      measurement: SPME,

1737. Lord, H. L. and Pawliszyn, J., (0), , Recent advances in solid phase microextraction and membrane extraction with a sorbent interface
      fungi: assessment, sampling and analysis,

1738. Lorentea, S. and Bejan, A., (2002), , Combined `flow and strength' geometric optimization: internal structure in a vertical insulating wall with air cavities and prescribed strength
      cavity wall,

1739. Lorenz, W., (2001), , A glazing unit for solar control, daylighting and energy conservation

1740. Lougheed, G. D. and McCartney, C., (2002), , Research: smoke management - malls, sprinklers and smoke
      facility management, fire, smoke,

1741. Lounis, Z., D. J. Vanier and M. A. Lacasse, (1998), , A discrete stochastic model for performance prediction of roofing systems
      HAM: theory and modelling, mathematics: error analysis, uncertainty analysis, mathematics: stochastical modeling and analysis, roof,

1742. Loutzenhiser, P. G., Manz, H., Carl, S., Simmler, H. and Maxwell, G. M., (2008), , Empirical validations of solar gain models for a glazing unit with exterior and interior blind assemblies

1743. Love, P. E. D., Lopez, R. and Wards, D. J., (2013), , Reviewing the past to learn in the future: making sense of design errors and failures in construction

1744. Low, G. A., Palfreyman, J. W., White, N. A. and Sinclair, D. C. R., (1999), , Development of model systems for investigations of the dry rot fungus Serpula lacrymans (Schumach. ex Fr.) Gray: Use for analysis of the environmental sensitivity of the organism
      fungi and molds in buildings and their envelopes, wood, lumber, timber,

1745. Lowe, R., (2001), , A review of recent and current initiatives on climate change and its impact on the built environment: impact, effectiveness and recommendations final report
      built environment, climate change, global warming, surveys, reviews, statistics,

1746. Lozano, G. D. A., (2002), , Mold and law
      fungi and molds in buildings and their envelopes, fungi: legal, law, litigation, insurance issues,

1747. Lstiburek, J., (1995), , The fundamental flaw of EIFS
      EIFS, EIFS damage,

1748. Lstiburek, J., (1999), , Unventing attics in cold climates
      attic, crawl space, ceiling,,

1749. Lstiburek, J., (2004), , Builder's guide: cold climates
      design, weather data and issues,

1750. Lstiburek, J. and Carmody, J., (1991), , Moisture Control Handbook: new low-rise, residential construction
      moisture control, moisture management,

1751. Lstiburek, J. W., (2004), , Understanding vapor barriers
      building codes and standards, vapor barrier, vapor retarder,

1752. Lstiburek, J. W., (1998), , Pressure response of buildings
      wind induced pressure on building,

1753. Lstiburek, J. W., (2008), , Blame It on Star Trek: Solving IAQ Problems

1754. Lstiburek, J., Pressnail, K. and Timusk, J., (2002), , Air pressure and building envelopes
      envelope, ventilation: airtightness, air leakage,, wind induced pressure on building,

1755. Lstiburek, Joseph W. and Carmody, J., (1993), , Moisture control handbook: principles and practices for residential and small commercial buildings
      building: commercial, office, building: residential, house, home, moisture control, moisture management,

1756. Lu, L. and Law, K. M., (2013), , Overall energy performance of semi-transparent single-glazed photovoltaic (PV) window for a typical office in Hong Kong

1757. Lu, S., Amor, R. and Donn, M., (2002), , An Internet-based Building Simulation Quality Assurance System
      simulation of building process,

1758. L¨ą, X., (2002), , Modelling of heat and moisture transfer in buildings, I. Model program
      HAM: theory and modelling,

1759. L¨ą, X., (2002), , Modelling of heat and moisture transfer in buildings II. Applications to indoor thermal and moisture control
      HAM: application, HAM: computer models,

1760. Lu, X. S. and Viljanen, M., (2000), , On controlling indoor thermal and moisture content for an occupied building
      experiment: field testing and monitoring programs, HAM: theory and modelling, Whole building HAM: theory and modeling,

1761. Lua, T. and Chen, C., (2007), , Uncertainty evaluation of humidity sensors calibrated by saturated salt solutions

1762. Lucas, F., Adelard, F., Franc?ois Garde, and Boyer, H., (2002), , Study of moisture in buildings for hot humid climates
      moisture in buildings,

1763. Lucuik, M., Trusty, W., Larsson, N., & Charette, R., (2005), , A Business Case for Green Buildings in Canada
      green building, sustainable building,

1764. Ludwig, N., Redaelli, V., Rosina, E. and Augelli, F., (2004), , Moisture detection in wood and plaster by IR thermography

1765. Lugauskas, A., Krik?taponis, A. and Bridiuvien, D., (2000), , Mycological monitoring of different workplaces in Lithuania
      fungi: assessment, sampling and analysis, fungi: health effects, fungi: mycology studies, culturing,

1766. Luikov, A.V., (1966), , Heat and mass transfer in capillary-porous bodies
      HAM hygrothermal simulation,

1767. Luizi-ponzo, A.P. and Barth, O.M, (1999), , Spore morphology of some Dicranaceae species (Bryophyta) from Brazil
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

1768. Lundgren, N. L. C., Hagman, O. and Johansson, J., (2006), , Predicting moisture content and density distribution of Scots pine by microwave scanning of sawn timber II: evaluation of models generated on a pixel level
      measurement: moisture content,

1769. Lundin L. and Nodby, O. K., (2002), , Mold, bacteria,dugs: a new tool for tracing microbiological problems hidden in building construction
      bacteria, fungi: molds in buildings, fungi: MVOC - microbial volatile organic compound,

1770. Luoma, M. and Batterman, S. A., (2001), , Characterization of particulate emissions from occupant activities in offices
      building: commercial, office, IAQ - indoor air quality, measurement and instrumentation, occupancy, occupants, residents, homeowner,

1771. Luukkanen, J. and Kaivo-oja, J., (2002), , Meaningful participation in global climate policy? Comparative analysis of the energy and CO2 efficiency dynamics of key developing countries
      climate change, global warming,

1772. Lux, M.E. and W.C. Brown, (1986), , Air leakage control
      air barrier, standards discussion, ventilation: infiltration of buildings,

1773. Luyendijk, R. and Nowak, M, (2004), , Review of Programs Embracing a Whole-House or Systems Approach for Housing
      simulation of building process,

1774. Lyberg, M. D., (1997), , Basic air infiltration
      ventilation: infiltration of buildings,

1775. Macdonald, I. And Strachan, P., (2001), , Practical application of uncertainty analysis
      mathematics: error analysis, uncertainty analysis, mathematics: Monte Carlo simulation method, risk analysis, thermal analysis and performance,

1776. Macher, J. (Ed), (1999), , Bioaerosols: assessment and contro
      fungi and molds in buildings and their envelopes, fungi: assessment, sampling and analysis, fungi: components and products,

1777. Macher, J. M., (2001), , Review of methods to collect settled dust and isolate culturable microorganisms
      experiment: mycology study, fungi: mycology studies, culturing, IAQ: measurement,

1778. Macher, J.M., F. C. Tsai, L.E. Burton, K.Liu, and J. M. Waldman, (2001), , Prevalence of culturable airborne fungi in 100 U.S. office buildings in the building assessment survey and evaluation (BASE) study
      building: commercial, office, country: US, experiment: field testing and monitoring programs, fungi and molds in buildings and their envelopes, surveys, reviews, statistics,

1779. Mackley, C.J. and S. Milonas, (2001), , Knowledge transfer and green building challenge
      sustainability, environment,

1780. Madelin, T. M., (1994), , Fungal aerosols: A review
      fungi: spore, aerosol,

1781. Madelin, T. M. and Johnson, H. E., (1992), , Fungal and actinomycete spore aerosols measured at different humidities with an aerodynamic particle sizer
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

1782. Mahdavi, A. and Lam, K. P., (1993), , Dynamic analysis and visualization of water vapor diffusion through building components
      HAM: theory and modelling,

1783. Mahooti-brooks, N., Storey, E., Yang, C., Simcox, N. J., Turner, W., Hodgson, M., (2004), , Inflammatory and cytotoxic responses in mouse lungs exposed to purified toxins from building isolated Penicillium brevicompactum
      fungi: health effects,

1784. Mainelis, G., Adhikari, A., Willeke, K., Lee, S. A., Reponen, T. and Grinshpun, S. A., (2002), , Collection of airborne microorganisms by a new electrostatic precipitator
      fungi: assessment, sampling and analysis,

1785. Makepeace, C. B., (1999), , Wrap it up: building houses with the skin on the outside
      EIFS, rainscreen, pressure equalized rainscreen principle,

1786. Makepeace, C. B. and Dennis, B. T., (1998), , PERSIST -- pressure equalized rain screen insulated structure technique -- design approach
      rainscreen, pressure equalized rainscreen principle,

1787. Makepeace, C.B., R. Ogle, and R. Nelson, (1999), , Dynamic buffer zone - DBZ
      cladding, siding, veneer, condensation and evaporation, fungi: molds in buildings, National Building Code (NBC) of Canada,

1788. Maki, A. And Valkealahti, S., (2012), , Power Losses in Long String and Parallel-Connected Short Strings of Series-Connected Silicon-Based Photovoltaic Modules Due to P

1789. Makower, J., Pernick, R. and Wilder, C., (2008), , Clean Energy Trends 2008

1790. Malkawi, A. M., Srinivasan, R. S., (2005), , A new paradigm for Human-Building Interaction: the use of CFD and Augmented Reality
      CFD - computational fluid dynamics, computer code, software, measurement: wireless sensor network,

1791. Malkin, R., Martinez, K., Marinkovich, V., Wilcox, T., Wall, D. and Biagini, R., (1998), , The relationship between symptoms and IgG and IgE antibodies in an office environment
      fungi: molds in buildings,

1792. Malmqvist, T. and Glaumann, M., (2009), , Environmental efficiency in residential buildings - A simplified communication approach
      sustainability, environment,

1793. Mann, S., Harris, I. and Harris, J., (2006), , The development of urban renewable energy at the existential technology research center (ETRC) in Toronto, Canada
      BIPV,

1794. Manna, D., Vigni, V., Sanseverino, E. R., Dio, V. and Romano, P., (2014), , Reconfigurable electrical interconnection strategies for photovoltaic arrays: A review

1795. Manufactured Housing Research Alliance, (2007), , Pilot Study: Applying Lean to Factory Home Building

1796. Manufactured Housing Research Alliance, (2003), , Technology Roadmapping For Manufactured Housing

1797. Manz, H., (2008), , On minimizing heat transport in architectural glazing
      windows, doors, fenestration,

1798. Mao, Q., (2008), , Experimental Determination of Drying Capacity of Wood-Frame Envelope Systems for Comparative Studies and Limit State Design

1799. Mao, Q., Fazio, P. and Rao, J., (2011), , A limit state design (LSD) approach for comparing relative drying performance of wood-frame envelope systems with full-scale lab, A roadmap towards intelligent net zero- and positive-energy buildings,

1800. Mao, Q., Fazio, P. and Rao, J., (2009), , In-cavity evaporation allowance--A drying capacity indicator for wood-frame wall system
      envelope performance,

1801. Mao, Q., Rao, J. and Fazio, P., (2004), , Effect of capillarity on rainwater penetration in the building envelope
      rain penetration, water intrusion,

1802. Mar, J. D., Litovsky, E., Kleiman, J., (2008), , Modeling and database development of conductive and apparent thermal conductivity of moist insulation materials

1803. Marcham, C., Johnson, D., Esmen, N., Clinkenbeard, R. and Lynch, R., (2002), , 24-hr ambient and residential aerosol characterization using automated piezoelectric cascade impactors
      fungi: assessment, sampling and analysis,

1804. Mardiana-idayu, A. and Riffat, S. B., (2012), , Review on heat recovery technologies for building applications

1805. Maref, W., (2002), , Summary of Research Contributions Related to Moisture Management of Exterior Wall System (MEWS)-- Modeling, Experiments and Benchmarking
      PCA -- Principal component analysis, research, funding, Resource: institutes, organization, associations, service life prediction,

1806. Maref, W., Lacasse, M. A. and Booth, D. G., (2003), , An approach to validating computational models for hygrothermal analysis - full scale experiments
      facility management, HAM: theory and modelling,

1807. Maref, W., Lacasse, M. A. and Booth, D. G., (2002), , Executive Summary of Research Contributions Related to Moisture Management of Exterior Wall Systems (MEWS) - Modeling, Experiments, and Benchmarking
      HAM: application, PCA -- Principal component analysis,

1808. Maref, W., Lacasse, M., Kumaran, M. K. and Swinton, M. C., (2003), , Benchmarking of the advanced hygrothermal model hygIRC with mid scale experiments
      HAM: validation,

1809. Maref, W., Swinton, M. C., Kumaran, M. K. and Bomberg, M. T., (2001), , Three-dimensional analysis of thermal resistance of exterior basement insulation systems (EIBS)
      insulation, thermal analysis and performance,

1810. Maref, W., Tardiff, Y. and Booth, D. G., (2002), , Assembly and Calibration of a Compact Temperature and Relative Humidity Sensor
      measurement and instrumentation,

1811. Maref, W.M. Lacasse, M.A. and Krouglicof, N., (2001), , A precision weighing system for helping assess the hygrotherma response of full-scale wall assemblies
      experiment: facility on moisture in building envelope, experiment: laboratory, HAM: computer models, OSB - Oriented strandboard, validation of models,

1812. Marek, R. and Straub, J., (2001), , Analysis of the evaporation coefficient and the condensation coefficient of water
      condensation and evaporation,

1813. Marinetti, S., Grinzato, E., Bison, P. G., Bozzi, E., Chimenti, M., Pieri, G. and Salvetti, O., (2004), , Statistical analysis of IR thermographic sequences by PCA
      PCA -- Principal component analysis,

1814. Marinoski, D. L., Guhs, S., Pereira, F. O. R. and Lamberts, R., (2007), , Improvement of a measurement system for solar heat gain through fenestrations

1815. Marinoski, D. L., Guths, S and Lamberts, R., (2012), , Development of a calorimeter for determination of the solar factor of architectural glass and fenestrations

1816. Markova, N., Sparr, E. and Wads?, L., (2001), , On application of an isothermal sorption microcalorimeter
      measurement: hygrothermal properties,

1817. Marmion, P., (2001), , Building systems: coping with terrorism
      building subsystems: HVAC, building: damage and failures,

1818. Marmion, P., (2001), , Green government
      energy efficiency, green building project,

1819. Marquardt, H. and Mainka, G. W., (2001), , High-performance wood-based panels substitute breathable membranes on external wall sheathings
      envelope materials, OSB - Oriented strandboard, sheathing,

1820. Marsh, G., (2010), , Solar PV and thermal ¨C a marriage made in heaven?
      PV/T,

1821. Marshall, R. D., (1994), , Manufactured homes - probability of failure and the need for better windstorm protection through improved anchoring systems
      prefabricate buildings, manufactured housing, wind induced pressure on building,

1822. Marshall, R. R., (2001), , 2001 Building Failures Study
      envelope damage, moisture damages and problems for buildings,

1823. Marszal, A. J., Heiselberg, P., Bourrelle, J. S., Musall, E., Voss, K., Sartori, I. and Napolitano, A., (2011), , Zero Energy Building - A review of definitions and calculation methodologies

1824. Martel, S., Kutny, L. and Troke, D., (1998), , Photovoltaics for the North: Five Years of Breaking Down Barriers in the Northwest Territories
      Housing research for the North, PV PV Photovoltaic,

1825. Martin, V., Cavanagh, J., Carswell, F., Turney, I. and Gordon, R., (2001), , Greenhouse gas emissions: the capital and revenue carbon costs of residential developments
      building: residential, house, home, greenhouse gas emissions,

1826. Marzouk, M. and Moselhi, O., (2002), , Simulation optimization for earthmoving operations using genetic algorithms
      construction management,

1827. Mason, M. A., Roache, N. F., Guo, Z. and Costa., D., (2003), , Design and characterization of a small chamber for chemical and biological evaluation of sources of indoor air contamination
      IAQ - indoor air quality,

1828. Mason, S. J., Hill, R. R., M?nch, L., Rose, O., Jefferson, T. and Fowler, J. W. (eds), (2008), , Simulation of modular building construction

1829. Masoso, O. T. and Grobler, L. J., (2010), , The dark side of occupants' behaviour on building energy use
      energy: calculation,

1830. Master, Z. F., Engineer, S., Yingjie, Z., Zuxin, Z., Song, Z. and Bingyi, Y., (2000), , Bending of uniformly loaded rectangular plates with two adjacent edges clamped, one edge simply supported and the other edge fre

1831. Matheson, M.C., S. C. Dharmage, A. B. Forbes, et al., (2003), , Residential characteristics predict changes in Der p 1, Fel d 1 and ergosterol but not fungi over time
      fungi: components and products,

1832. Matilainen, M. and Pasanen, P., (2002), , Transport of fungal spores from crawl space to indoors
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

1833. Matilainen, M., Jerkku I. and Kurnitski, J., (1999), , Crawl space types and building physics
      attic, crawl space, ceiling,,

1834. Matson, R. J., Emery, K. A. and Bird, R. E., (1984), , Terrestrial solar spectra, solar simulation and solar cell short-circuit current calibration: A review

1835. Matson, U., EPA, EPA, (2005), , Comparison of the modelling and the experimental results on concentrations of ultra-fine particles indoors
      particle transport, penetration of particulate, through walls,

1836. Matsumoto, M., (1995), , Transient heat and moisture transfer through building envelope under rain precipitation
      governing equations for heat and moisture transfer, moisture damages and problems for buildings, numerical method in heat and moisture transfer, rain penetration, water intrusion,

1837. Mattock, C., (1991), , Exterior insulation and finish systems (EIFS): problems, causes and solutions
      EIFS damage, insulation,

1838. Mattsson, B., Claesson, J., (2007), , A transient pressurization method for measurements of airtightness
      ventilation: airtightness, air leakage,,

1839. Maturi, L., Sparber, W., Kofler, B. and Bresciani, W., (2010), , Analysis and monitoring results of a BIPV system in northern Italy
      BIPV,

1840. Maurenbrecher, A. H. P., Rousseau, M. Z., Said, M. N. and Shirtliffe, C. J., (1998), , Monitoring the hygrothermal performance of a masonry wall with and without thermal insulation
      brick, masonry, mortar, experiment: field testing and monitoring programs, insulation,

1841. Maurenbrecher, A. H. P., Trischuk, K. J. and Rousseau, M. Z., (2001), , Review of factors affecting the durability of repointing mortars for older masonry
      brick, masonry, mortar, durability: building envelope, envelope materials,

1842. May, J. C., (2001), , Sampling, results & remediation in 300 "sick houses"
      IAQ: sick building syndrome, SBS,

1843. Mbakogu, F. C. and Pavlovic, M. N., (2000), , Bending of clamped orthotropic rectangular plates: a variational symbolic solution

1844. Mbise, D. L. B., Niklasson, G.A. and Granqvist, C.G., (1997), , Angular selective window coatings: theory and experiments
      windows, doors, fenestration,

1845. Mcbaina, G. D., (1997), , Natural convection with unsaturated humid air in vertical cavities
      cavity wall,

1846. Mccrady, E., (1999), , Mold: the whole picture. pt. 2, assessment of mold problems
      fungi: damage to buildings,

1847. Mcdonald, N. C. and Pearce, J. M., (2010), , Overcoming Barriers for Reduction of Diesel Dependency with Renewable Energy Technologies in Nunavut
      Housing research for the North,

1848. Mcdonald, S. A., Konstantatos, G., Zhang, S., Cyr, P. W., Klem, E. J. D., Levina, L. and Sarg, w. H., (2005), , Solution-processed PbS quantum dot infrared photodetectors and photovoltaics
      PV/T,

1849. Mcelroy , D. L., Kimpflen , J. F., Graves , R. S. and Wysocki, D. C., (1990), , Insulation materials, testing, and applications
      insulation,

1850. Mcgowan, A. G. and Desjarlais, A. O., (1997), , Investigation of common thermal bridges in walls
      thermal bridge,

1851. McGowan, A. G., Wright, J. L., (1998), , Computer simulation of window condensation potential
      building: simulation of building processes, condensation and evaporation, standards: CSA, windows, doors, fenestration,

1852. McKeever, D. B., (1997), , Engineered wood products: a response to the changing timber resource
      OSB - Oriented strandboard, wood, lumber, timber, wood: engineered products,

1853. McKeever, D. B. and Adair, C., (1995), , Wood products used in new nonresidential building construction
      market, trend, future, PCA -- Principal component analysis, wood frame houses and walls, wood structure, wood, lumber, timber,

1854. Mckenney, D. W., Pelland, S. and Poissant, Y., Morris, R., Hutchinson, M., Papadopol, P., Lawrence, K. and Campbell, K., (2008), , Spatial insolation models for photovoltaic energy in Canada

1855. Mckinsey, (2008), , The carbon productivity challenge: Curbing climate change and sustaining economic growth

1856. Mckone, T. E., Thatcher, T. L., Fisk, W. J., Sextro, R. G., Sohn, M. D., Delp, W. W. and Riley, W. J., (2002), , Factors affecting the concentration of outdoor particles indoors: Existing data and data needs
      IAQ: particulate, dust,,

1857. McNeel, S. V. and Kreutzer, R. V., (1996), , Fungi & Indoor Air Quality
      fungi and molds in buildings and their envelopes, IAQ - indoor air quality,

1858. Mcwilliams, J., (2002), , Review of airflow measurement techniques
      tracer gas method for measuring air exchange, ventilation: measurement, ventilation: measurement,

1859. Meacham, B., Bowen, R., Traw, J. and Moore, A., (2005), , Performance-based building regulation: current situation and future needs
      building codes and standards, performance-based building codes and standards,

1860. Meadows, D. L. , Randers, J., Behrens III William W. ,, (1972), , The limit to growth: a report for the Club of Rome's project on the predicament of mankind
      green building, sustainable building, sustainability, environment,

1861. Medina, M. A., King, J. B. and Zhang, M., (2008), , On the heat transfer rate reduction of structural insulated panels (SIPs) outfitted with phase change materials (PCMs)

1862. Meerbeek, B., Kulve, M., Gritti, T., Aarts, M., Loenen, E. v. and Aarts, E., (2014), , Building automation and perceived control: A field study on motorized exterior blinds in Dutch offices

1863. Mei, D. I., Eicker, U. and Fux, V., (2003), , Thermal modelling of a building with an integrated ventilated PV fa?ade

1864. Meininghaus, R. and Uhde, E., (2002), , Diffusion studies of VOC mixtures in a building material
      VOC transport, VOC: measurement and identification,

1865. Mekid, S., Vajaa, D., (2008), , Propagation of uncertainty: Expressions of second and third order uncertainty with third and fourth moments

1866. Mekis, E. and Hogg, W. D., (1998), , Rehabilitation and analysis of Canadian daily precipitation time series
      rain,

1867. Meklin T. , Haatainen S., Kauriinvaha E., Kettunen3 A-V., Haverinen U., Vahteristo M., , Viljanen M., and Nevalainen, A., (2001), , Microbes and moisture content of materials from damaged building
      fungi: moisture damaged house -- indoor microbial concentrations,

1868. Meklin, T., (2002), , Microbial exposure and health in schools - effects of moisture damage and renovation
      fungi: damp house -- health, fungi: indoor biocontamination -- health symptom, fungi: moisture damaged house -- indoor microbial concentrations, fungi: remediation, treatment, prevention, renovation, repair, maintenance,

1869. Meklin, T., Husman, T. and Vepselainen, A., (2000), , Moisture damage in schools - symptoms and indoor air microbes
      bacteria, biodeterioration, IAQ - indoor air quality, moisture damages and problems for buildings,

1870. Meklin, T., Husman, T., Veps?l?inen, A., Vahteristo, M., Koivisto, J., Halla-aho, J., Hyv?rinen, A., Moschandreas, D. and Nevalainen, A., (2002), , Indoor air microbes and respiratory symptoms of children in moisture damaged and reference schools
      fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations,

1871. Meklin, T., Hyvarinen, A., Toivola, M., Reponen, T., Koponen, V., Husman, T., Taskinen, T., Korppi, M. and Nevalainen, A., (2003), , Effect of building frame and moisture damage on microbiological indoor air quality in school buildings
      fungi: damage to buildings, fungi: molds in buildings,

1872. Meklin, T., Reponen, T., Koponen, V., Husman, T., Hyvarinen, A. and Nevalainen, A., (2002), , Size distributions of airborne microbes in moisture-damaged and reference school buildings of two construction types
      fungi: components and products, fungi: spore, aerosol,

1873. Melencion, N. and Morrell., , (2007), , Performance of antisapstain compounds on kiln-dried Douglas-fir and hem-fir lumber subjected to rewetting

1874. Melikov, A. and Popiolek, Z., (2004), , Comparison of different methods for the determination of dynamic characteristics of low velocity thermal anemometers
      measurement: anemometer, low air velocity in room,

1875. Melikov, A. K. . P., Silva, Z., Care, M. C. G. and Sefker, I., (2007), , Accuracy Limitations for Low-Velocity Measurements and Draft Assessment in Room

1876. Melikov, A., Popiolek, Z., Finkelstein, W., Sefker, T., Care, I., (1998), , Requirements and guidelines for low velocity measurements
      measurement: anemometer, low air velocity in room,

1877. Melikov, R.K., (1998), , Recent european research on low-velocity measurements
      measurement: anemometer, low air velocity in room,

1878. Melikova, A. K., Kr¨ągerb, U., Zhoua, G., Madsenc, T. L. and Langkildea , G., (1997), , Air temperature fluctuations in rooms
      Indoor air movement-CFD,

1879. Mendell, M. J., Phd, M., Fisk, W. J., et al., (2002), , Improving the Health of Workers in Indoor Environments: Priority Research Needs for a National Occupational Research Agenda
      health, IAQ: Health,

1880. Mendes, N., Lamberts, R., Philipp, P.C, (2001), , Moisture migration through exterior envelopes in brazil
      HAM: computer models,

1881. Mendes, N., Oliveira, R. C. L. F. and Santos, G.H.D., (2003), , DOMUS 2.0: a whole-building hygrothermal simulation program
      HAM: theory and modelling,

1882. Mendes, N., Ridley, I., Lamberts, R., Philippi, P. C. and Budag, K., (1999), , UMIDUS: a pc program for the prediction of heat and moisture transfer in porous building elements
      HAM: computer models,

1883. Mendon?a, P. and Bragan?a, L., (2007), , Sustainable housing with mixedweight strategy--A case study
      sustainability, environment,

1884. Menetrez, M. and Foarde, K., (2002), , Microbial volatile organic compound emission rates and exposure model
      fungi: MVOC - microbial volatile organic compound,

1885. Meng, B., (1994), , Resolution-dependent characterization of interconnected pore system: development and suitability of a new method
      material,

1886. Meola, C., Maio, R., Roberti, N. and Carlomagno, G. M., (2005), , Application of infrared thermography and geophysical methods for defect detection in architectural structures

1887. Mercaldo, L. V., Addonizio, M. L., Noce, M. D., Veneri, P. D., Scognamiglio, A. and Privato, C., (2009), , Thin film silicon photovoltaics: Architectural perspectives and technological issues
      BIPV, PV PV Photovoltaic,

1888. Messadi, T. and Augenbroe G., (2001), , A configurable smart facade unit for on-site calibration and control optimization
      double facades, envelope, measurement and instrumentation,

1889. Meunier, F., (2007), , The greenhouse effect: A new source of energy
      green building, sustainable building,

1890. Meyer, H. W., W¨ąrtz, H., Valbj?rn, O., Sigsgaard, T., Gyntelberg, F. and the DAMIB-group, (2002), , Moulds and health - an epidemiological study
      fungi: health effects,

1891. Miguel, A. F., van_Braak, N. J., Silva, A. M. and Bot, G. P. A., (2001), , Wind-induced airflow through permeable materials, Part II: air infiltration in enclosures

1892. Miguela, A. F., (2008), , Constructal design of solar energy-based systems for buildings

1893. Mika, T., Marju, R., Anne, H., Teija, M., Aino, N., (2001), , Different methods to characterize moldy buildings
      fungi: molds in buildings,

1894. Mikko, V., Jouni, R., Tuula, H., Aino, N., (2001), , Moisture observations and health
      fungi: damp house -- health, fungi: health effects,

1895. Militzer, J. and Bell, T. A., (2001), , CFDnet: Recent Developments and Future Work
      Indoor air movement-CFD,

1896. Miller, J. D., (1992), , Fungi as contaminants in indoor air
      fungi: indoor biocontamination -- health symptom, fungi: spore, aerosol,

1897. Miller, J. D., (1995), , Quantification of health effects of combined exposures: a new beginning
      fungi: health effects,

1898. Miller, J. D. and Young, J. C., (1997), , The use of ergosterol to measure exposure to fungal propagules in indoor air
      fungi: components and products,

1899. Miller, J. D. et al, (1996), , Transportation energy embodied in construction materials
      embodied energy,

1900. Miller, J. D., Dales, R., White, I., (1999), , Exposure measures for studies of mold and dampness and respiratory health
      fungi: damp house -- health, fungi: exposure investigation, fungi: health effects, fungi: indoor biocontamination -- health symptom,

1901. Miller, J. D., Laflamme, A. M., Sobol, Y., Lafontaine, P. and Greenhalgh, R., (1988), , Fungi and fungal products in some Canadian houses
      fungi: assessment, sampling and analysis, fungi: molds in buildings, IAQ - indoor air quality,

1902. Miller, J.D., Haisley, P.D. and Reinhardt, J.H, (2000), , Air sampling results in relation to extent of fungal colonization of building materials in some water-damaged buildings
      experiment: field testing and monitoring programs, fungi: moisture damaged house -- indoor microbial concentrations, fungi: Stachybotrys,

1903. Miller, J.D., Mendes, N., (1992), , Microbial contamination of indoor air
      bacteria, fungi: molds in buildings,

1904. Miller, S. L., Leiserson, K. and Nazaroff, W. W., (1997), , Nonlinear least-squares minimization applied to tracer gas decay for determining airflow rates in a two-zone building
      ventilation: air flow models, multi zone model,

1905. Millington, W. M. and Corden, J. M., (2005), , Long term trends in outdoor Aspergillus/Penicillium spore concentrations in Derby, UK from 1970 to 2003 and a comparative study in 1994 and 1996 with the indoor air of two local houses
      fungi: aerobiology, dispersion of spores,,

1906. Mills, E., (2003), , Climate change, insurance and the buildings sector: technological synergisms between adaptation and mitigation
      climate change, global warming, technology,

1907. Milton, D. K., Markglencross, P. and Walters, M. D., (2000), , Risk of sick leave associated with outdoor air supply rate, humidification, and occupant complaints
      IAQ - indoor air quality, IAQ: Health, IAQ: sick building syndrome, SBS, mathematics: regression analysis / fitting, ventilation: standards,

1908. Minister of Public Works and Government Services Canada, (2000), , The environmentally responsible construction and renovation handbook, 2nd Ed
      environmental impacts and issues,

1909. Minkina, W. and Dudzik, S., (2009), , Infrared Thermography: Errors and Uncertainties

1910. Minor, J. E., (2005), , Lessons learned from failures of the building envelope in windstorms
      envelope damage, wind,

1911. Miozzo, M. and Dewick, P., (2005), , Towards understanding innovation in construction
      construction industry,

1912. Miraglia, M., Brera, C. and Colatosti, M., (1996), , Application of biomarkers to assessment of risk to human health from exposure to mycotoxins
      fungi: components and products, fungi: health effects,

1913. Mirsadeghi, M., Blocken, B. and Hensen, J. L. M., (2008), , Validation of external BES-CFD coupling by inter-model comparison
      CFD - computational fluid dynamics,

1914. Mirzaei, P. A. and Haghighat, F., (2012), , Modeling of phase change materials for applications in whole building simulation

1915. Mishra, B. and Kar, B. P., (2012), , Matlab based modeling of photovoltaic array characteristics

1916. MIT, (2009), , The Future of Geothermal Energy: Impact of Enhanced Geothermal Systems (EGS) on the United States in the 21st Century,

1917. Mitakakis, T. Z. and Mcgee, P. A., (2000), , Reliability of measures of spores of Alternaria and pollen concentrations in air over two towns in rural Australia
      fungi: assessment, sampling and analysis,

1918. Mitamura, T., C. Rode and J. Schultz, (2001), , Full-scale testing of indoor humidity and moisture buffering in building materials
      envelope materials, experiment: facility on moisture in building envelope, experiment: mycology study, Whole building HAM: humidity level in houses, Whole building HAM: theory and modeling,

1919. Mitchell, P. and Hyde, R., (1996), , Embodied energy: a parameter for the environmetal assessment of building materials
      embodied energy,

1920. Mitchell, S. L. and Vynnycky, M., (2014), , On the numerical solution of two-phase Stefan problems with heat-flux boundary conditions

1921. Mitra?inovi?, A., (2011), , Photo-catalytic properties of silicon and its future in photovoltaic applications

1922. Miyazaki, T., Akisawa, A. and Kashiwagi, T., (2005), , Energy savings of office buildings by the use of semi-transparent solar cells for windows
      PV PV Photovoltaic, windows, doors, fenestration,

1923. Modern Plastics Editorial Staff, (1997), , Vapor-barrier film permits home insulation to `breathe'
      smart vapor retarder,

1924. Mokhtar, A., (1991), , A Dynamic Model for Daylighting Impact on Energy Savings in Direct Passive Solar Buildings
      Fazio's student: thesis,

1925. Mokhtar, A. H. M., (1998), , An information model for managing design changes in a collaborative multidisciplinary design environment
      design, Fazio's student: thesis, PCA -- Principal component analysis,

1926. Mokhtarzadeh-dehghana, R., (2007), , Natural convection between two floors of a building via a horizontal opening -- Measurements in a one-half scale model
      buoyancy air flow,

1927. Molina, ., Bustamante, W., Rao, J., Fazio, P. and Vera, S., (2014), , Evaluation of radiance's genBSDF capability to assess solar bidirectional properties of complex fenestration systems

1928. Monde, M., Kosaka, M. and Mitsutake, Y., (2010), , Simple measurement of thermal diffusivity and thermal conductivity using inverse solution for one-dimensional heat conduction

1929. Mondol, J. D., Yohanis, Y. G. and Norton, B., (2008), , Solar radiation modelling for the simulation of photovoltaic systems

1930. Monitor, (2007), , An introduction to uncertainty in measurement using the GUM (guide to the expression of uncertainty in measurement)

1931. Moon, H.J., (2005), , Assessing mold risks in buildings under uncertainty
      fungi: assessment, sampling and analysis,

1932. Moon, R. J., Frihart, C. R. and Wegner, T., (2006), , Nanotechnology applications in the forest products industry
      technology, wood, lumber, timber,

1933. Mora, E.P., (2007), , Life cycle, sustainability and the transcendent quality of building materials
      life cycle assessment (LCA), material,

1934. Mora, L., Gadgil, A. J. and Wurtz, E., (2002), , Comparing zonal and CFD model predictions of isothermal indoor airflows to experimental data
      CFD - computational fluid dynamics,

1935. Mora, L., Gadgil, A. J., Wurtz, E. and Inard, C., (2002), , Comparing zonal and CFD model predictions of indoor airflows under mixed convection conditions to experimental data
      Indoor air movement-CFD,

1936. Mora, M., Wurtz, E., Mendon?a, K. C. and Inard, C., (2004), , Effects of coupled heat and moisture transfers through walls upon indoor environment predictions
      Indoor air movement-CFD,

1937. Moraes, O. L. L., Ferro, M., Alves, R. C. M. and Tirabassi, T., (0), , Estimating eddy diffusivities coefficients from spectra of turbulence
      Indoor air movement-CFD,

1938. Morari, M., Lee, J. H. and Past, M.P.C., (1999), , Model predictive control:present and future

1939. Morbitzer, C. A., (2003), , Towards the Integration of Simulation into the Building Design Process
      simulation: heat transfer, thermal, simulation: heat transfer, thermal,

1940. Morbitzer, C., Strachan, P. and Simpson, C., (2003), , Application of data mining techniques for building simulation performance prediction
      simulation of building process,

1941. Morello, E. and Ratti, C., (2009), , Sunscapes: `Solar envelopes' and the analysis of urban DEMs, Computers

1942. Morey, P. and Hull, M., (2002), , Water leakage from exterior walls as an indicator of degraded air quality
      fungi: assessment, sampling and analysis, fungi: molds in buildings, fungi: spore, aerosol,

1943. Morey, P. R., (1990), , Practical aspects of sampling for organic dusts and microorganisms
      fungi: assessment, sampling and analysis,

1944. Morey, P. R., Cih, D. S., (2001), , Mitigation of visible fungal contamination in buildings: experience from 1993 - 1998
      fungi: molds in buildings, fungi: remediation, treatment, prevention,

1945. Morey, P. R., Hull, M. C. and Andrew , M., (2003), , El Ni?o water leaks identify rooms with concealed mould growth and degraded indoor air quality
      weather, climates,

1946. Morey, P., Abe, K., Horner, E. and Ligman, B., (2002), , Use of fungal detectors to monitor drying of water damaged buildings
      fungi: assessment, sampling and analysis, fungi: molds in buildings,

1947. Morey, P., Andrew, M., Ligman, B. and Jarvis, J., (2002), , Hidden mold sometimes enters the indoor air
      fungi: mold in walls -- indoor microbial concentrations, fungi: molds in buildings, fungi: spore, aerosol,

1948. Morley, M., (2000), , Building with structural insulated panels (SIPs): Strength and Energy Efficiency Through Structural Panel Construction
      SIP: structural insulated panels, wood: engineered products,

1949. Morli¨¨rea, N., Corrioub, J., Favreb, E. and Roizarda, D., (2002), , Characterization of film transport properties for organic vapors using the time-lag method -- interest and limitations
      VOC transport, VOC: measurement and identification,

1950. Moropoulou, A., Avdelidis, N. P. and Koui, M., (2000), , Compatibility assessment of building materials using Infrared Thermography
      material, measurement: Infrared,

1951. Morrell, J. J., (2000), , Predicting decay rates in structures: the effects of wood moisture content on decay rate
      biodeterioration, fungi: growth and growth model, moisture damages and problems for buildings, wood, lumber, timber,

1952. Morrell, J. J., (2002), , Wood-based building components: what have we learned?
      wood frame houses and walls, wood structure,

1953. Morris, A.S., (2005), , Measurement & Instrumentation Principles
      experiments and testing,

1954. Morris, P. I., (1998), , Understanding biodeterioration of wood in structures
      biodeterioration, wood frame houses and walls, wood structure,

1955. Morris, P. I. and Winandy, J. E., (2002), , Limiting conditions for decay in wood systems
      design, wood frame houses and walls, wood structure,

1956. Morrisa, G., Kokkib, M. H., Andersonc, K. and M. D. R., (2000), , Sampling of Aspergillus spores in air
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

1957. Morrison Hershfield, (1992), , Moisture content in Canadian wood-frame house construction problems, research and practise from 1975-1991
      wood frame houses and walls, wood structure,

1958. Morrison Hershfield Limited, (1996), , Testing of Air Barriers Construction Details - I & II
      air barrier, experiments and testing,

1959. Morrison Hershfield Limited, (1998), , Survey of building envelope failures in the coastal climate of British Columbia
      BC leaky condos, cladding, siding, veneer, EIFS damage, measurement: GC-MS, OSB - Oriented strandboard, WRB weather-resistive barrier, house wrap,

1960. Morrison Hershfield Limited, (1991), , CMHC research project: testing of air barriers: construction details
      air barrier,

1961. Morrison Hershfield Limited, (2001), , Air Barrier Details - I & II
      air barrier,

1962. Morrison Hershfield Limited, (1996), , Commissioning and Monitoring the Building Envelope for Air Leakage
      air barrier, ventilation: airtightness, air leakage,,

1963. Morrison Hershfield Limited, (1990), , A study of the rainscreen concept applied to cladding systems on wood frame walls
      cladding, siding, veneer, experiment: laboratory, rain penetration, water intrusion, rainscreen, pressure equalized rainscreen principle, wood frame houses and walls, wood structure,

1964. Morrison Hershfield Limited, (2001), , A commissionable air barrier system for the building envelope
      air barrier,

1965. Morrison Hershfield Ltd., (2004), , Assessing the impact of thickness on the performance of stucco cladding
      cladding, siding, veneer,

1966. Morse, R., Zehnter, D., (2003), , Effect of Air Transport Through Mold Contaminated Ductwork.
      experiments and testing,

1967. Morse-Fortier, L. J., (1995), , Structural implications of increased panel use in wood-frame buildings
      structural load of building envelope, wood frame houses and walls, wood structure,

1968. Mortensen, L. H., Woloszyn, M., Rode, C. and Peuhkuri, R., (2007), , Investigation of Microclimate by CFD Modeling of Moisture Interactions between Air and Constructions

1969. Morton, I., (2002), , Achieving Healthy Indoor Environments: A Review of Canadian Options
      country: Canada, IAQ - indoor air quality, IAQ: Health, IAQ: measurement, IAQ: sick building syndrome, SBS,

1970. Moselhi, O., (1978), , Analysis of perforated walls and tube-type tall building structures
      construction management, Fazio's student: thesis,

1971. Moselhi, O. and Hassanein, A., (2003), , Data acquisition and analysis for highway construction using geographic information systems
      construction management,

1972. Moselhi, O., Gong, D. and El-rayes, K., (1997), , Estimating weather impact on the duration of construction activities
      construction management,

1973. Moselhi, O., Li, J. and Alkass, S., (2004), , Web-based integrated project control system
      construction management,

1974. Mosley, R. B. and Greenwell., D. J., (2001), , Chamber simulation of fine particle penetration into houses
      fungi: aerobiology, dispersion of spores,,

1975. Mosley, R. B., Greenwell, D. J., Sparks, L. E., Guo, Z., Tucker, W. G., Fortmann, R. and Whitfield, C., (2001), , Penetration of ambient fine particles into the indoor environment
      IAQ: particulate, dust,,

1976. Motakef, S., and L.R. Glicksman, (1989), , A capacitance probe for measurement of moisture content in open pore thermal insulations
      drying potential of building envelope, experiment: facility on moisture in building envelope, measurement: moisture content, roof,

1977. Mousa, M. A. and Uddin, N., (2011), , Global buckling of composite structural insulated wall panels

1978. Moyer, N.A., D. Beal, D. Chasar, J. McIlvaine, C. Withers and S. Chandra, (2001), , Moisture problems in manufactured housing: probable causes and cures
      fungi: molds in buildings, moisture damages and problems for buildings, prefabricate buildings, manufactured housing,

1979. Mucalov, J. and G. Mucalov abstract:, Mucalov, J. and Mucalov, G., Mucalov, J. and Mucalov, G., (2002), , Lawsuits grow as moulds multiply: Homeowners are seeking damages in Canada and the U.S. as moulds bring host of health problems
      fungi: health effects, fungi: legal, law, litigation, insurance issues,

1980. Muilenberg, M. L., (0), , Sampling devices
      fungi: assessment, sampling and analysis,

1981. Mukhopadhyaya, P. and Kumaran, M. K., (2000), , Prediction of moisture response of wood frame walls using IRC's advanced hygrothermal model (hygIRC)
      HAM: computer models, wood frame houses and walls, wood structure,

1982. Mukhopadhyaya, P., Goudreau, P., Kumaran, M. K. and van Reenen, D., (2002), , Influence of material properties on the moisture response of an ideal stucco wall: results from hygrothermal simulation
      simulation of building process, WRB weather-resistive barrier, house wrap,

1983. Mukhopadhyaya, P., Kumaran, K. and Normandin, N., (2002), , Effect of surface temperature on water absorption coefficient of building materials
      HAM: material properties,

1984. Mukhopadhyaya, P., Kumaran, K., Tariku, F. and Reenen, D.V., (2003), , Final report from task 7 of MEWS long-term performance: predict the moisture management performance of wall systems as a function of climate, material properties, etc. through mathematical modelling
      envelope, envelope design, HAM: application,

1985. Mukhopadhyaya, P., Kumaran, K., van Reenen, D. and Tariku, F., (2001), , Influence of sheathing membrane and vapour barrier on hygrothermnal response of stucco walls
      EIFS, HAM: theory and modelling, sheathing, vapor barrier, vapor retarder, WRB weather-resistive barrier, house wrap,

1986. Mullens, M. and Arif, M., (2006), , Structural Insulated Panels: Impact on the Residential Construction Process

1987. Muller, A., Lehmann, I., Seiffart, A., Diez, U., Wetzig, H., Borte, M., Herbarth, O., (2002), , Increased incidence of allergic sensitisation and respiratory diseases due to mould exposure: Results of the Leipzig Allergy Risk children Study (LARS)
      fungi: moisture damaged house -- indoor microbial concentrations,

1988. M¨ąller, M., B¨ąnger, J., Hallier, E., (2001), , Mycotoxin spectra as a biochemical parameter for occupational and environmental fungus exposure
      fungi: components and products,

1989. Muller, M., Marion, B. and Rodriguez, J., (2012), , Evaluating the IEC 61215 Ed.3 NMOT procedure against the existing NOCT procedure with PV modules in a side-by-side configuration

1990. M¨ąller-sch?ll, C., Brunold, S. and Frei, U., (2002), , Significance of Spectral Correction of Collector Measurements Performed in Solar Simulators

1991. Mulvin, L. and Lewis, J. O., (1994), , Architectural detailing, weathering and stone decay
      Fa?ade wetting, water runoff, soiling,

1992. Murad, Y. M., Lewis, C. W., Anderson, J. G. and Smith, J. E., (1993), , Preparation of fungal spores for mycotoxin detection
      fungi: components and products, fungi: spore, aerosol,

1993. Murakami, S., (1998), , Overview of turbulence models applied in CWE-1997
      CFD - computational fluid dynamics, wind,

1994. Murakami, S., Kato, S., Ito, K. and Zhu, Q., (2003), , Modeling and CFD prediction for diffusion and adsorption within room with various adsorption isotherms
      CFD - computational fluid dynamics, HAM: theory and modelling,

1995. Murthy, A. V., Prokhorov, A. V. and Dewitt, D. P., (2004), , High heat-flux sensor calibration: a monte carlo modeling
      Sensor: heat flux,

1996. Murtoniemi, T., Nevalainen, A., Suutari, M. and Hirvonen, M., (2002), , Effect of liner and core materials of plasterboard on microbial growth, spore-induced inflammatory responses, and cytotoxicity in macrophages
      fungi: assessment, sampling and analysis,

1997. Murtoniemi, T., Nevalainen, A., Suutari, M., Toivola, M., Komulainen, H. and Hirvonen, M., (2001), , Induction of Cytotoxicity and Production of Inflammatory Mediators in RAW264.7 Macrophages by Spores Grown on Six Different Plasterboards
      fungi: indoor biocontamination -- health symptom, fungi: molds in buildings,

1998. Musy, M., Winkelmannb, F., Wurtzc, E. and Sergentd, A., (2002), , Automatically generated zonal models for building air flow simulation: principles and applications
      building: simulation of building processes, ventilation: infiltration of buildings,

1999. Mwasha, A., Williams, R. G. and Iwaro, J., (2011), , Modelling The Performance Of Residential Building Envelope: The Role Of Sustainable Energy Performance Indicators

2000. Myers, J. H., (1984), , Aluminum and vinyl siding on historic buildings, the appropriateness of substitute materials for resurfacing historic wood frame buildings
      cladding, siding, veneer, wood frame houses and walls, wood structure,

2001. Nafey, A.S., (2005), , Simulation of solar heating systems-an overview

2002. Nagano, K., Mochida, T., Shimakura, K., Murashita, K. and Taka, S., (2003), , Development of thermal-photovoltaic hybrid exterior wallboards incorporating PV cells in and their winter performances
      energy, PV/T, Renewable energy: solar,

2003. NAHB, (2001), , Residential remodeling reports, Moisture Moisture Protection Protection of Wood of Wood Sheathing
      building: residential, house, home, country: US, renovation, repair, maintenance, sheathing,

2004. NAHB, (1998), , Building better homes at lower costs: the industry implementation plan for the residential national construction goals
      building: residential, house, home, country: US, market, trend, future,

2005. NAHB, (2001), , Moisture moisture protection protection of wood of wood sheathing
      moisture control, moisture management, sheathing,

2006. NAHB, (2004), , Technology Roadmap: Advanced Panelized Construction - 2003 Progress Report

2007. NAHB Research Center, (1999), , Wood used in new residential construction 1998 and 1995
      building: residential, house, home, housing market, OSB - Oriented strandboard, wood panel, wood, lumber, timber, wood: engineered products,

2008. NAHB Research Center, (1995), , Residential construction waste management demonstration and evaluation, assistance agreement number: CX 822813-1-0, Task 1 report
      building: residential, house, home,

2009. NAHB Research Center, (2002), , Durability by design: a guide for residential builders and designers
      durability: building envelope,

2010. NAHB Research Center & Building Works, (2007), , Prescriptive Method for Structural Insulated Panels (SIPs) Used In Wall Systems In Residential Construction

2011. NAHB Research Center, Inc, (2001), , Review of structural materials and methods for home building in the United States: 1900-2000
      structural load of building envelope, wood frame houses and walls, wood structure, wood panel,

2012. NAHB Research Center, Inc, (1996), , Comparative costs of alternative building systems in new residential construction
      building: residential, house, home, economical requirement of building envelope,

2013. NAHB Research Center, Inc, (2003), , Commercialization of Innovation: Lessons Learned
      technology, technology transfer,

2014. NAHB Research Center, Inc, (0), , Mold & moisture intrusion case study report
      fungi: moisture damaged house -- indoor microbial concentrations,

2015. NAHB Research Center, Inc., (2001), , Assessing housing durability: a pilot study
      durability: building envelope,

2016. NAHB Research Center, Inc., (2002), , Water intrusion evaluation for caulkless siding, window, and door systems-laboratory testing results
      envelope materials, experiment: field testing and monitoring programs, rain penetration, water intrusion, windows, doors, fenestration,

2017. NAHB Research Center, Inc., (2002), , Accelerating the Adoption of Vacuum Insulation Technology in Home Construction, Renovation, and Remodeling

2018. Nahora, H. B., Hoanga, M. L., Verbovena, P., Baelmansb, M. and Nicola?ˇ§a, B. M., (2005), , CFD model of the airflow, heat and mass transfer in cool stores
      Indoor air movement-CFD,

2019. Nakagawa, H. Matsumoto, M. and Matsushita, T., (1995), , Dynamic behaviors of room climate under rain precipitation - effects of moisture absorbing partition wall
      numerical method in heat and moisture transfer, rain on walls, rain precipitation, rain on walls, rain precipitation,

2020. Nakahara, N., H. Yoshida, M. Udagawa and J. Hensen, (1999), , Building Simulation '99. Proceedings of the 6th International IBPSA Conference, (Editors)
      building: simulation of building processes, simulation of building process,

2021. Nakhi, A.E, (1995), , Adaptive construction modelling within whole building dynamic simulation
      building: simulation of building processes, HAM: computer models,

2022. Namienik, J., Zygmunt, B. and Jastrzbska, A., (2000), , Application of solid-phase microextraction for determination of organic vapours in gaseous matrices
      measurement: SPME, VOC: measurement and identification,

2023. Namiesnik, J., Gorlo, D., Wolska, L. and Zygmunt, B., (1999), , On calibration of solid phase microextraction-gas chromatography-mass spectrometry system for analysis of organic air contaminants using gaseous standard mixtures
      measurement: GC-MS, measurement: SPME,

2024. N?sman, ?., Blomquist, G. and Levin, J., (1999), , Air sampling of fungal spores on filters. An investigation on passive sampling and viability
      fungi: assessment, sampling and analysis,

2025. National Association of Home Builders, (2002), , Steel vs. wood -- long-term thermal performance comparison, Valparaiso demonstration homes
      wood, lumber, timber,

2026. National Association of Home Builders, (2000), , Residential Structural Design Guide: 2000 Edition, A State--of--the--Art Reviiew and Application of Engineering Information for Light--Frame Homes, Aparttmentts, and Townhouses
      guideline, structure aspect, strength and rigidity of building envelope,

2027. National Research Council, (1997), , Developing a digital national library for undergraduate science, mathematics, engineering and technology education: report of a workshop
      Resources: statistics,

2028. Navon, U. and Fenn, J. B., (1971), , Interfacial mass and heat transfer during evaporation. I. An experimental technique and some results with a clean water surface
      capillary break, condensation and evaporation,

2029. NBC, (1995), , National Building Code of Canada
      National Building Code (NBC) of Canada,

2030. NBC, (2005), , National Building Code of Canada 2005
      building codes and standards, country: Canada,

2031. Neale, A., (2007), , A study in computational fluid dynamics for the determination of convective heat and vapour transfer coefficients
      CFD - computational fluid dynamics,

2032. Neises, W., Klein, S. A. and Reindl, D. T., (2011), , Development of a Thermal Model for Photovoltaic Modules and Analysis of NOCT Guidelines

2033. Nelson, B. D., (2001), , Stachybotrys chartarum: the toxic indoor mold
      fungi: components and products, fungi: Stachybotrys,

2034. Nelson, P.E. and Richard, E. K., (1996), , Exterior insulation finish systems (EIFS) : materials, properties, and performance
      EIFS, fire, smoke,

2035. nergy Information Administration (EIA), (2009), , International Energy Outlook 2008

2036. Nevalainen, A., Pastuszka, J., Liebhaber, F. and Willeke, K., (1992), , Performance of bioaerosol samplers: collection characteristics and sampler design considerations
      fungi: components and products, fungi: spore, aerosol, measurement and instrumentation,

2037. Nevalainen, A., Vahteristo, M., Koivisto, J., Meklin, T., Hyv?rinen, A., Keski-karhu, J., Husman, T., (2001), , Moisture, mold and health in apartment homes
      fungi: health effects, fungi: indoor biocontamination -- health symptom, fungi: moisture damaged house -- indoor microbial concentrations,

2038. Nevalainena, A., Meklina, T. and Hyv?rinena, A., (1998), , Sources and exposures to biological particles
      fungi and molds in buildings and their envelopes,

2039. New York City Department of Health, (0), , Guidelines on assessment and remediation of fungi in indoor environments
      fungi and molds in buildings and their envelopes, fungi: assessment, sampling and analysis, fungi: remediation, treatment, prevention, IAQ: Health,

2040. Newell, S. Y. and Fallon, R. D., (1991), , Toward a method for measuring instantaneous fungal growth rates in field samples
      fungi: assessment, sampling and analysis,

2041. Newmana, A. J., (1974), , The independent core method----A new technique for the determination of moisture content
      measurement: moisture content,

2042. Newport Partners LLC, (2006), , Moisture-Resistant Homes - A Best Practice Guide and Plan Review Tool for Builders and Designers With a Supplemental Guide for Homeowners
      building,

2043. Newport Partners, LLC, (2004), , Building moisture and durability - past, present and future work
      durability: building envelope, moisture in buildings,

2044. Newsham, G. R., Mancini, S. and Birt, B. J., (2009), , Do LEED-certified buildings save energy? Yes
      green building, sustainable building,

2045. Newsham, G. R., Mancini, S. and Birt, B. J., (2009), , Do LEED-certified buildings save energy? Yes, butˇ­
      green building, sustainable building, LEED,

2046. NFRC, (1997), , NFRC Test procedure for measureing the steady-state thermal transmittance of fenestration system, revised 1997
      experiments and testing, windows, doors, fenestration,

2047. NFRC, (2001), , NFRC 100: Procedure for Determining Fenestration Product U-factors
      building codes and standards, thermal analysis and performance, windows, doors, fenestration,

2048. NFRC, (2010), , NFRC 400-2010[E0A0] Procedure for Determining Fenestration Product Air Leakage
      standards, windows, doors, fenestration,

2049. NFRC, (2010), , NFRC 300-2010 Test Method for Determining the Solar Optical Properties of Glazing Materials and Systems
      standards, windows, doors, fenestration,

2050. NFRC, (2010), , NFRC 500-2010 Procedure for Determining Fenestration Product Condensation Resistance Values
      standards, windows, doors, fenestration,

2051. NFRC, (2010), , NFRC 200-2010[E0A0] Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence
      standards, windows, doors, fenestration,

2052. Ng, K. C., Aziz, M. A. A. and Ng, E. Y. K., (2011), , On the effect of turbulent intensity towards the accuracy of the zero-equation turbulence model for indoor airflow application

2053. Ngowi, A. B., Pienaar, E., Talukhaba, A. and Mbachu, J., (2005), , The globalisation of the construction industry--a review
      construction industry,

2054. Nicas, M., (2001), , Modeling turbulent diffusion and advection of indoor air contaminants by Markov chains.
      Indoor air movement-CFD,

2055. Nicklin, J., (2003), , Mycology lecture course
      fungi and molds in buildings and their envelopes,

2056. Nicol, F. and Humphreys, M., (2009), , Derivation of the adaptive equations for thermal comfort in free-running buildings in European standard EN15251
      thermal comfort,

2057. Nicol, J. F. and Humphreys, M. A., (2002), , Adaptive thermal comfort and sustainable thermal standards for buildings
      thermal comfort,

2058. Nicolajsen , A., (2005), , Thermal transmittance of a cellulose loose-fill insulation material
      insulation, measurement: thermal properties,

2059. Nielsen, A., (1995), , Use of statistics for prediction of risk for condensation in a wall construction cold walls radiation technique: the case of quality of air
      condensation and evaporation, mathematics: Monte Carlo simulation method,

2060. Nielsen, A., (1999), , 3D room models for moisture balance calculations
      building: simulation of building processes,

2061. Nielsen, A., (2002), , Use of FMEA - failure modes effects analysis on moisture problems in buildings
      fungi: damage to buildings,

2062. Nielsen, J., (2001), , Measurement of soil moisture using gypsum blocks
      measurement: moisture content,

2063. Nielsen, K. F. and Madsenc, J.?., (2000), , Determination of ergosterol on mouldy building materials using isotope dilution and gas chromatography--tandem mass spectrometry
      fungi: components and products, measurement: GC-MS,

2064. Nielsen, K. F., Nielsen, P. and Holm, G., (2000), , Growth of moulds on building materials under different humidities
      fungi: growth and growth model, measurement: GC-MS,

2065. Nielsen, K. F., Thrane, U., Larsen, T. O., Nielsen, P. A. and Gravesen, S., (1998), , Production of mycotoxins on artificially inoculated building materials
      fungi: components and products,

2066. Nielsen, K.F, (2002), , Mould growth on building materials: Secondary metabolites, mycotoxins and biomarkers
      fungi: components and products, fungi: molds in buildings, fungi: MVOC - microbial volatile organic compound, fungi: mycology studies, culturing,

2067. Nielsen, K.F., (2003), , Mycotoxin production by indoor molds
      fungi: components and products,

2068. Nielsen, K.F., Gravesen, S., Nielsen, P.A., Andersen, B., Thrane, U., Frisvad, J.C, (1999), , Production of mycotoxins on artificially and naturally infested building materials
      fungi: components and products, fungi: moisture damaged house -- indoor microbial concentrations, fungi: mycology studies, culturing,

2069. Nielsen, M. V., Svendsen, S. and Jensen, L. B., (2011), , Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight

2070. Niemi, S., (2000), , Automatic structural moisture measurement system in inhabited dwellings
      concrete, measurement: moisture content,

2071. Nieminen, S. M., K?rki, R., Auriola, S., Toivola, M., Laatsch, H., Laatikainen, R., Hyv?rinen, A. and Wright, A.V, (2002), , Isolation and identification of Aspergillus fumigatus mycotoxins on growth medium and some building materials
      fungi: mycology studies, culturing,

2072. Nik, V. M., Kalagasidis, A. S. and Kjellstrom, E., (2012), , Assessment of hygrothermal performance and mould growth risk in ventilated attics in respect to possible climate changes in Sweden

2073. Nilsson, J., H?kansson, H. and Karlsson, B., (2007), , Electrical and thermal characterization of a PV-CPC hybrid
      building subsystems: electrical, PV/T,

2074. Nilssona, T., Larsenb, T. O., Montanarellac, L. and Madsena, J. ?., (1996), , Application of head-space solid-phase microextraction for the analysis of volatile metabolites emitted by Penicillium species
      fungi: MVOC - microbial volatile organic compound, measurement: GC-MS, measurement: SPME, VOC: measurement and identification,

2075. Nishioka, M. G., Burl, H. M., Brinkman, M.C. and Hines, C., (1999), , Transport of lawn-applied 2,4-D from turf to home: assessing the relative importance of transport mechanisms and exposure pathways
      particle transport, penetration of particulate, through walls,

2076. Nisson, N. and Best, D., (1999), , Exterior insulation and finish systems
      EIFS, EIFS damage, fungi: legal, law, litigation, insurance issues, moisture damages and problems for buildings, WRB weather-resistive barrier, house wrap,

2077. Niu, J., Tung, T. C., and Chui, V. W. Y., (1998), , Using large environmental chamber technique for gaseous contaminant removal equipment test
      testing facility,

2078. No, S., Kim, K. and Jung, J., Bayer, J. A. and Clift, C. D., (2008), , Simulation and mock-up tests of the thermal performance of curtain walls
      curtain wall, experiment: laboratory,

2079. Nofal, M. and M.K. Kumaran, (2002), , Criteria for unaccesseptable damage on wood systems
      moisture in buildings, wood frame houses and walls, wood structure,

2080. Nofal, M. and M.K. Kumaran, (2000), , On implementing experimental biological damage-functions models in durability assessment systems
      durability: biodeterioration, durability: building envelope, fungi: growth and growth model, HAM: theory and modelling,

2081. Nofal, M. and M.K. Kumaran, (1999), , Durability assessments of wood-frame construction using the concept of damage-functions
      durability: building envelope, fungi: growth and growth model,

2082. Nofal, M. and Morris, P., (2003), , Criteria for unacceptable damage on wood systems

2083. Nolard, N., (2001), , Indoor moulds: a public health problem in Belgium: overview of 15 years' experience
      fungi: molds in buildings,

2084. Nolard, N., (2001), , Fungal allergies
      fungi: health effects, fungi: indoor biocontamination -- health symptom,

2085. Norback, D., Bjornsson, E., Janson, C., Palmgren, U. and Boman, G., (1999), , Current asthma and biochemical signs of inflammation in relation to building dampness in dwellings
      fungi: moisture damaged house -- indoor microbial concentrations,

2086. Norberg, P., (1999), , Electrical measurement of moisture content in porous building materials
      measurement: moisture content,

2087. Nordtest, (1993), , Building materials and components in the vertical position: exposure to accelerated climatic strains
      experiment: laboratory, standards: European,

2088. Nortdtest, (0), , NT Build 420, Building Materials, Wood: Moisture Content
      wood, lumber, timber,

2089. Norton, B., Eames, P. C., Mallick, T. K., Huang, M. J., Mccormack, S. J., Mondol, J. D. and Yohanis, Y. G., (2011), , Enhancing the performance of building integrated photovoltaics
      BIPV, PV/T,

2090. Notton, G., Motte, F., Cristofari, C. and Canaletti, J., (2014), , Performances and numerical optimization of a novel thermal solar collector for residential building

2091. Noumowe, A.N., T. Ohkubo, M. Makatayama, and K. Watanabe, (1999), , Coupled heat and mass transfer in building materials
      moisture control, moisture management,

2092. NRC, (2000), , The partnership for advancing technology in housing: year 2000 progress assessment of the PATH Program
      research, funding,

2093. NRC, (1997), , Canada Advances on the Home Front
      housing project,

2094. NRCan, (2006), , The State of Energy Efficiency in Canada, Office of Energy Efficiency Report 2006

2095. NRCan, (2009), , Summary Report for the Technology and Innovation Research and Development Initiative

2096. NREL, (1997), , Unglazed transpired solar collector having a low thermal-conductance absorber

2097. NRTEE, (2009), , True North: adapting infrastructure to climate change in Northern Canada

2098. NRTEE, (2010), , Measuring Up: Benchmarking Canada's Competitiveness in a Low-Carbon World

2099. NSTC, (2008), , Government Issues R&D Agenda for "Net-Zero" Energy Green Buildings."
      Zero Energy Building: ZEB,

2100. Nstc, , (2008), , Federal Research and Development Agenda for Net-Zero Energy, High-Performance Green Buildings
      Zero Energy Building: ZEB,

2101. NY Manufactured Housing Research Allianc, (2003), , Eliminating Barriers to the Use of HUD-Code Housing in Attached Construction

2102. OAA, (0), , The rain screen wall system
      rainscreen, pressure equalized rainscreen principle,

2103. Obiso, M.L., (1997), , Analysis of means and methods of construction improvement in single family housing in mid-atlantic rural university towns
      technology,

2104. O'brien, W. and Athienitis, K. K. a. K., (2013), , Manually-operated window shade patterns in office buildings: A critical review

2105. ?deen, K. and J. Nor¨¦n, (1999), , Durability of wood
      durability: building envelope, durability: materials and components, envelope design, life cycle assessment (LCA), noise, service life prediction, wood, lumber, timber,

2106. OECD, (2002), , Basic Science and Technology Statistics: 2001 Edition
      research, funding,

2107. Ogura, D., Matsushita, T. and Matsumoto, M., (1995), , A study of heat and moisture behavior of an underground space - effects of wall structure
      numerical method in heat and moisture transfer,

2108. Oh, K., Chen, Y., Matsuoka, H., Yamamoto, A. and Kurata, H., (1996), , Morphological recognition of fungal spore germination by a computer-aided image analysis and its application to antifungal activity evaluation
      fungi: spore, aerosol, measurement and instrumentation,

2109. Ojanen, T., (1998), , Improving the drying efficiency of timber frame walls in cold climates, by using exterior insulation
      computer codes for heat-air-moisture transfer, drying potential of building envelope, experiment: hygrothermal performance, fungi: growth and growth model, HAM: experimental work, OSB - Oriented strandboard,

2110. Ojanen, T., (2001), , Thermal and moisture performance of a sealed cold-roof system with a vapor-permeable underlay
      roof,

2111. Ojanen, T. and Kumaran, M. K., (1995), , Effect of exfiltration on the hygrothermal behaviour of a residential wall assembly: results from calculations and computer simulations
      building: residential, house, home, HAM: theory and modelling,

2112. Ojanen, T. and M. Salonvaara, (2000), , Numerical simulation of mould growth in timber frame walls
      building: simulation of building processes, fungi: growth and growth model, risk analysis, wood frame houses and walls, wood structure,

2113. Ojanen, T., Salonvaara, M. and Simonson, C. J., (2002), , Integration of simplified drying tests and numerical simulation in moisture performance analysis of the building envelope
      experiment: laboratory, HAM: computer models, HAM: experimental work, HAM: material properties,

2114. Ojanen, Tuomo; Kohonen, Reijo; Kumaran, M., (1994), , Modeling heat, air and moisture transport through building materials and components
      HAM: theory and modelling,

2115. Okeil, A., (2010), , A holistic approach to energy efficient building forms

2116. Okland, O., (1998), , Convection in highly insulated building structures
      building: simulation of building processes, experiment: hygrothermal performance, HAM: theory and modelling, insulation, mathematics: Monte Carlo simulation method, mathematics: stochastical modeling and analysis,

2117. Oksaa, P., a, M. S., Syd?nheimoa, L. and Kivikoskia, M., (2008), , Kilavi platform for wireless building automation
      measurement: wireless sensor network,

2118. Okuyama, H., (1990), , System identification theory of the thermal network model and an application for multi-chamber airflow measurement
      Indoor air movement,

2119. Okuyama, H., Onishi, Y., Tanabe, S. and Kashihara, S., (2009), , Statistical data analysis method for multi-zonal airflow measurement using multiple kinds of perfluorocarbon tracer gas
      tracer gas method for measuring air exchange,

2120. Olesen, B. W., (2004), , International standards for the indoor environment
      IAQ: Guidelines, ventilation: standards,

2121. Olesen, B.W. and Parsons, K.C, (2002), , Introduction to thermal comfort standards and to the proposed new version of EN ISO 7730
      standards: International, thermal comfort,

2122. Oleskowicz-popiel, C. and Sobczak, M., (2014), , Effect of the roller blinds on heat losses through a double-glazing window during heating season in Central Europe

2123. Oleszkiewicz, I. (ed), (1997), , Final report of CIB task group 11 performance-based building codes
      performance-based building codes and standards,

2124. Oliveira, S. P., Rocha, A. C., Filho, J. T. and Couto, P. R. G., (2009), , Uncertainty of measurement by Monte-Carlo simulation and metrological reliability in the evaluation of electric variables of PEMFC and SOFC fuel cells
      mathematics: Monte Carlo simulation method,

2125. Olivieri, L., Caamano-martin, E. and Olivieri, J. N., (2014), , Integral energy performance characterization of semi-transparent photovoltaic elements for building integration under real operation conditions

2126. Omar, M. A., Parvataneni, R. and Zhou, Y., (2010), , A combined approach of self-referencing and principle component thermography for transient, steady, and selective heating scenarios

2127. Omar, M., Hassan, M. I., Saito, K. and Alloo, R., (2005), , IR self-referencing thermography for detection of in-depth defects

2128. Omer, A. M., (2008), , Focus on low carbon technologies: The positive solution

2129. Omojaro, P. and Breitkopf, C., (2013), , Direct expansion solar assisted heat pumps: A review of applications and recent research

2130. Onysko, D., Rijn, G. V., Gates, D. and Fugler, D., (2005), , Remediating high moisture levels in the wall cavities of preserved wood foundations
      moisture in buildings, renovation, repair, maintenance,

2131. Onysko, D.M. and Jones, S.K, (1989), , Airtightness of wall sheathing as a function of lumber drying
      drying potential of building envelope, sheathing, ventilation: airtightness, air leakage,,

2132. Oral, G. K. and Yilmaz, Z., (2003), , Building form for cold climatic zones related to building envelope from heating energy conservation point of view
      energy, envelope,

2133. Ordenes, M., Marinoski, D. L., Braun, P. and R¨ąther, R., (2007), , The impact of building-integrated photovoltaics on the energy demand of multi-family dwellings in Brazil
      BIPV, Renewable energy: solar,

2134. Orme, M., (2001), , Estimates of the energy impact of ventilation and associated financial expenditures

2135. Ortiz, O., Castells, F. and Sonnemann, G., (2009), , Sustainability in the construction industry: A review of recent developments based on LCA

2136. Osanyintola, O. F. and Simonson, C. J., (2006), , Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact
      Moisture buffering,

2137. Osanyintola, O. F., Talukdara, P. and Simonson, C. J., (2006), , Effect of initial conditions, boundary conditions and thickness on the moisture buffering capacity of spruce plywood
      wood, lumber, timber,

2138. OSHA, (1999), , OSHA Technical Manual
      IAQ - indoor air quality,

2139. Osmani, M. and O'reilly, A., (2009), , Feasibility of zero carbon homes in England by 2016: A house builder's perspective
      sustainability, environment,

2140. Os¨®rioa, T. and Carvalho, M.J., (2014), , Testing of solar thermal collectors under transient conditions

2141. Ossenbrink, H., (2004), , Calibration procedures - state of the art

2142. Othman, Y., Yatim, B., Sopian, K. and Bakar, N. A., (2005), , Performance analysis of a double-pass photovoltaic/thermal (PV/T) solar collector with CPC and fins
      PV/T,

2143. Ott, W. R., (1998), , Human activity patterns: a review of the literature for air pollution exposure estimation
      occupancy, occupants, residents, homeowner,

2144. Ou, Y., (1999), , The evolution of prefabricated interior components for post-occupancy modification

2145. Ouyang, Q., Dai, W., Li, H. J. and Zhu, Y. X., (2006), , Study on dynamic characteristics of natural and mechanical wind in built environment using spectral analysis
      Indoor air movement,

2146. Owen, G., (2000), , Energy efficiency and energy conservation: policies, programmes and their effectiveness
      energy efficiency,

2147. Owolabi, A. A., Anumba, C. J. and El-hamalawi, A., (2003), , Towards implementing integrated building product libraries
      building,

2148. Ozaki, A., (2000), , Systematic analysis model on combined heat and water transfere of gaseous, liquid and solid phase water system, based on thermodynamic energy
      HAM: theory and modelling,

2149. Ozaki, A., (2003), , Systematic analysis model on combined heat and water transfer using water potential based on thermodynamics
      HAM: theory and modelling,

2150. Ozaki, A., Watanabe, T. and Takase, S., (2004), , Simulation software of the hygrothermal environment of buildings based on detailed thermodynamic models
      Whole building HAM: models, Whole building HAM: theory and modeling,

2151. Ozdemir, I. M. and Gencosmanoglu, A. B., (2007), , Metamorphism in culture and housing desing: Turkey as an example

2152. Ozkaynak, H., Xue, J., Spengler, J., Wallace, L., Pellizzari, E. and Jenkins, P., (1996), , Personal exposure to airborne particles and metals: Results from the particle team study in Riverside, California
      IAQ - indoor air quality,

2153. Pacala, S. and Socolow., R., (2004), , Stabilization wedges: solving the climate problem for the next 50 years with current technologies
      climate change, global warming,

2154. Pacheco, R., Ord¨®?ez, J. and Mart¨Şnez, G., (2012), , Energy efficient design of building: A review

2155. Padfield, T., (1998), , The role of absorbent materials in moderating changes of relative humidity
      experiment: facility on moisture in building envelope, humidity on building performance, solar driven diffusion,

2156. Padfield, T., (1999), , Humidity buffering of interior spaces by porous,absorbent insulation, part of hygrothermal properties of alternative insulation materials
      envelope: interior finish, drywall, Whole building HAM,

2157. Padfield, T., Peuhkuri, R., Rode, C. and Hansen, K. K., (2002), , Non-isothermal water vapour transmission through porous insulation. Part 1: The climate chamber
      measurement: vapor diffusion properties, WVT,

2158. Pagliaro, M., Ciriminna, R. and Palmisano, G., (2010), , BIPV: merging the photovoltaic with the construction industry
      BIPV,

2159. Pajum?gi, A., Poikalainen, V., Veerm?e, I. and Praks, J., (2008), , Spatial distribution of air temperature as a measure of ventilation efficiency in large uninsulated cowshed
      ventilation: mechanical systems (HVAC),

2160. Palfreyman, J.W., Smith, D. and Low, G.A, (2001), , The use of representative modelling to test the efficacy of environmental control treatments for the dry rot fungus Serpula lacrymans: simulating the infection and the treatment of flooring timber
      fungi and molds in buildings and their envelopes,

2161. Pantic, S., Candanedo, L. and Athienitis, A. K., (2010), , Modeling of energy performance of a house with three configurations of building-integrated photovoltaic/thermal systems
      BIPV, PV/T,

2162. Panwar, N. L., Kaushik, S. C. and Kothari, S., (2011), , Role of renewable energy sources in environmental protection: A review

2163. Papadopoulos, C. E. and Yeung, H., (2001), , Uncertainty estimation and Monte Carlo simulation method
      mathematics: error analysis, uncertainty analysis,

2164. Papaefthimiou, S., Leftheriotis, G., Yianoulis, P., Hyde, T. J., Eames, P. C., Fang, Y., Pennarun, P. and Jannasch, P., (2006), , Development of electrochromic evacuated advanced glazing
      windows, doors, fenestration,

2165. Papaefthimiou, S., Syrrakou, E. and Yianoulis, P., (2009), , An alternative approach for the energy and environmental rating of advanced glazing: An electrochromic window case study
      windows, doors, fenestration,

2166. Papaefthimiou, S., Syrrakou, E. and Yianoulis, P., (2006), , Energy performance assessment of an electrochromic window
      windows, doors, fenestration,

2167. Papamichael, K. and Protzen, J., (1993), , The limits of intelligence in design
      design,

2168. Parameshwaran, R., Kalaiselvam, S., Harikrishnan, S. and Elayaperumal, A., (2012), , Sustainable thermal energy storage technologies for buildings: A review

2169. Parat, S., Perdrix, A., Fricker-hidalgo, H., Saude, I., Grillot, R. and Baconnier, P., (1997), , Multivariate analysis comparing microbial air content of an air-conditioned building and a naturally ventilated building over one year
      fungi: molds in buildings, IAQ - indoor air quality, ventilation: measurement,

2170. Parent, D., Stricker, S. and Fugler, D., (1996), , Ventilation in houses with distributed heating systems.
      ventilation - Air Infiltration and Ventilation in Buildings,

2171. Parfitt, M., (2008), , Uilding failures: avoiding the mistakes of yesterday leads to the successes of today, editorial

2172. Parfitt, M. K., (2007), , Architectural engineering approach to building fa?ade design, construction, and evaluation (Editorial)
      building, facility management,

2173. Parida, B., Iniyan, S. and Goic, R., (2011), , A review of solar photovoltaic technologies

2174. Park, J., Goe, C. I. H. S., Choe, K. T., Akpinar-elci, M. and Kreiss, K., (2003), , NIOSH health hazard evaluation report: Somerset county assistance office
      fungi: indoor biocontamination -- health symptom, IAQ - indoor air quality, IAQ: Health,

2175. Parker, D. S., (2009), , Very low energy homes in the United States: Perspectives on performance from measured data
      Zero Energy Building: ZEB,

2176. Parker, P., (2008), , Residential solar photovoltaic market stimulation: Japanese and Australian lessons for Canada

2177. Parnham, P., (1997), , Premature staining of new buildings - causes and remedies
      Fa?ade wetting, water runoff, soiling,

2178. Paroli, R. and Baskaran, A., (1996), , Keeping roofs on and working
      roof, solar energy, radiation, wind,

2179. Parrett, F. and Crilly, K., (2000), , Microbiological air monitoring
      fungi: assessment, sampling and analysis,

2180. Pasanen, A. -L, (1992), , Airborne mesophilici fungal spores in various residential environments
      fungi: molds in buildings,

2181. Pasanen, A. L., (2001), , A review: fungal exposure assessment in indoor environments
      fungi: exposure investigation,

2182. Pasanen, A. L., J. P. Kasanen, et al., (2000), , Fungal growth and survival in building materials under fluctuating moisture and temperature conditions
      biodeterioration, fungi: growth and growth model,

2183. Pasanen, A. -L., Lappalainen, S. and Pasanen, P., (1996), , Volatile organic metabolites associated with some toxic fungi end their mycotoxins
      fungi: components and products, fungi: MVOC - microbial volatile organic compound,

2184. Pasanen, A. L., Pasanen, P., Jantunen, M. J. and Kalliokoski, P., (1991), , Significance of air humidity and air velocity for fungal spore release into the air
      fungi: spore, aerosol,

2185. Pasanen, A. L., S. Rautiala, et al., (2000), , The relationship between measured moisture conditions and fungal concentrations in water-damaged building materials
      envelope damage, fungi and molds in buildings and their envelopes, fungi: growth and growth model,

2186. Pasanen, A. L., Yli-pietila, K., Pasanen, P., Kalliokoski, P. and Tarhanen, J., (1999), , Ergosterol content in various fungal species and biocontaminated building materials
      fungi: components and products,

2187. Pasanen, A., Heinonen-tanski, H., Kalliokoski, P. and Jantunen, M. J., (1992), , Fungal microcolonies on indoor surfaces an explanation for the base-level fungal spore counts in indoor air
      fungi: molds in buildings, fungi: spore, aerosol,

2188. Pasanen, A., Korpi, A., Kasanen, J.P., Pasanen, P., (2001), , Can microbial volatile metabolites cause irritation at indoor air concentrations?
      fungi: damp house -- health, fungi: health effects, fungi: indoor biocontamination -- health symptom, fungi: MVOC - microbial volatile organic compound,

2189. Pasanen, A., Korpia, A., Kasanena, J. and Pasanena, P., (1998), , Critical aspects on the significance of microbial volatile metabolites as indoor air pollutants
      fungi: health effects, fungi: indoor biocontamination -- health symptom, fungi: MVOC - microbial volatile organic compound,

2190. Pasanen, A.-L., Juutinen, T., Jantunen, M. J. and Kalliokoskia, P., (1992), , Occurrence and moisture requirements of microbial growth in building materials
      fungi: assessment, sampling and analysis, fungi: growth and growth model,

2191. Pasanen, A-L, (2000), , Evaluation of indoor fungal exposure
      fungi: molds in buildings, fungi: molds in buildings, fungi: MVOC - microbial volatile organic compound, measurement and instrumentation,

2192. Pasanen, P., Korpia, A., Kalliokoskia, P. and Pasanen, A., (1997), , Growth and volatile metabolite production of Aspergillus versicolor in house dust
      fungi: assessment, sampling and analysis, fungi: components and products, fungi: MVOC - microbial volatile organic compound,

2193. Pasanen, P., Pasanen, A. L., Luoma, M., and Kalliokoski, P., (1993), , Effect of duct-cleaning detergents and disinfection substances on mould growth
      fungi: molds in buildings,

2194. Pasanen, P.O. et al, (2001), , Fungal growth on wood surfaces at different moisture conditions in crawl spaces
      advanced insulation, attic, crawl space, ceiling,, experiment: mycology study, fungi: growth and growth model, wood, lumber, timber,

2195. Pasanen, R.S., A.L., Kasanen, J.P., Raunio, P., Rantam?ki, J., and Kalliokoski, P., (2000), , Moisture conditions and fungi in wood and wood based material samples collected from damp buildings
      fungi: molds in buildings, moisture in buildings,

2196. Pasqualetto, L., (1995), , Validation of building energy simulation programs
      building: simulation of building processes, energy, validation of models,

2197. Pasqualini, P., (1999), , The control of moisture movement in buildings using the dynamic buffer zone
      envelope design,

2198. PATH, (1999), , Improving durability in housing - background paper
      durability: building envelope,

2199. PATH, (1999), , Builder's Guide to Marketable, Affordable, and Durable Entry-level Homes
      housing market, prefabricate buildings, manufactured housing,

2200. Patterson, M. R., (2008), , Structural glass facades: A unique building technology
      envelope materials,

2201. Pauker, M. T., Tang, D., Jeter, S. M. and Abdel-khalik, S. I., (1998), , Novel method for measuring water evaporation into still air
      condensation and evaporation,

2202. Paul, G. C., Kent, C. A. and Thomas, C. R., (1993), , Viability testing and characterization of germination of fungal spores by automatic image analysis
      fungi: assessment, sampling and analysis,

2203. Pavl¨Şk, Z., Pavli¨Şk, J., Jirickov¨˘, M. and Cerny, R., (2002), , System for testing the hygrothermal performance of multi-layered building envelopes
      experiment: facility on moisture in building envelope,

2204. Pawliszyn, J., (2001), , Solid phase microextraction
      fungi: assessment, sampling and analysis, measurement: SPME,

2205. Pears, A., (1996), , Practical and policy issues in analysis of embodied energy and its application
      embodied energy,

2206. Peart, M.V. and D.P. Gatley, (1992), , Introduction to hotel mold/moisture problems in warm, humid climates
      fungi: molds in buildings,

2207. Peat, J. K., Dickerson, J. and Li, J., (1998), , Effects of damp and mould in the home on respiratory health: a review of the literature
      fungi: health effects,

2208. Pedersen, C. R., (1990), , Combined heat and mass transfer in building constructions
      HAM: computer models,

2209. Peer, L. B., (2005), , Field performance of rainscreeen wall assemblies in coastal BC
      BC leaky condos, rainscreen, pressure equalized rainscreen principle,

2210. Pel, L., (1995), , Moisture transport in porous building materials
      envelope materials, HAM: theory and modelling, measurement: moisture content,

2211. Pelland, S. and Poissant, Y., (2006), , An Evaluation of the Potential of Building Integrated Photovoltaics in Canada
      BIPV,

2212. Pelland, S., Mckenney, D. W., Poissant, Y., Morris, R., Lawrence, K., Campbell, K. and Papadopol, P., (2006), , The Development of Photovoltaic Resource Maps for Canada

2213. Peltola, J., M. A. Andersson, T. Haahtela, H. Mussalo-Rauhamaa, F. A. Rainey, R. M. Kroppenstedt, and R. A. Samson, (2002), , Toxic-metabolite-producing bacteria and fungus in an indoor environment
      bacteria, fungi: molds in buildings, fungi: MVOC - microbial volatile organic compound,

2214. Peng, C., Huang, Y. and Wu, Z., (2011), , Building-integrated photovoltaics (BIPV) in architectural design in China
      BIPV,

2215. Peng, J., Lu, L. and Yang, H., (2013), , Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems, 2013

2216. Peng, J., Lu, L., Yang, H. and Han, J., (2013), , Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer fa?ade,

2217. Penning, R.L., (1972), , Elastic stresses and deflections of flat square plates under uniformly distributed normal pressure: A critical review

2218. Pepper, D. W. and Wang, X, (2009), , Benchmarking COMSOL 3.5a - CFD problem

2219. Peppes, A. A., Santamouris, M. and Asimakopoulos, D. N., (2001), , Buoyancy-driven flow through a stairwel
      Indoor air movement,

2220. Pereira, F. O. R. and Sharples, S., (1991), , The development of a device for measuring solar heat gain and shading coefficients of windows in scale models

2221. Perez-Lombard, L., Ortiz, J. and Pout, C., (2008), , A review on buildings energy consumption information
      energy,

2222. Perr¨¦, P., (2007), , Multiscale aspects of heat and mass transfer during drying
      HAM hygrothermal simulation,

2223. Persily, A. K., (1996), , Issues in the Field Measurement of VOC Emission Rates
      VOC: measurement and identification,

2224. Persson, K., (2000), , Micromechanical modelling of wood and fibre properties
      wood, lumber, timber,

2225. Pessi, A. M., Suonketo, J., Pentti, M., Kurkilahti, M., Peltola, K. and Rantio-lehtimaki, A., (2002), , Microbial growth inside insulated external walls as an indoor air biocontamination source
      fungi: mold in walls -- indoor microbial concentrations,

2226. Pessi, A., Suonketo, J., Pentti, M., Kurkilahti, M., Rantio-lehtim?ki, A., (2000), , Microbial growth in insulation of external walls: modeling the indoor air biocontamination sources
      fungi: molds in buildings,

2227. Petrasch, J., Coray, P., Meier, A., Brack, M., H?berling, P. and Wuillemin, D., (2007), , A Novel 50 kW 11,000 suns High-Flux Solar Simulator Based on an Array of Xenon Arc Lamps

2228. Petrone Architects, (2000), , Rigid air barrier assemblies
      air barrier,

2229. Peuhkuri, R., (2003), , Moisture dynamics in building envelopes
      insulation,

2230. Philip, J. R. and de Vries, D. A., (1957), , Moisture movement in porous materials under temperature gradient
      governing equations for heat and moisture transfer,

2231. Phillips, B., (2002), , Compliance of ventilation systems installed to meet proposed changes to the 1995 NBCC
      building codes and standards, ventilation: standards,

2232. Piaia, J. C. Z., Cheriaf, M., Rocha, J. C. and Mustelier, N. L., (2013), , Measurements of water penetration and leakage in masonry wall: Experimental results and numerical simulation

2233. Pieckov¨˘, E., Jesensk¨˘, M. Z. and Wilikins, K., (2001), , Microscopic fungi and their metabolites in dwellings - a bioassay study
      fungi: components and products,

2234. Pietila, A., Beausoleil-morrison, I. and Newsham, G. R., (2012), , Zero peak housing: Exploring the possibility of eliminating electrical draws from houses during periods of high demand on the electrical grid

2235. Pietrzyk, K., Kurkinen, K., Hagentoft, , (2004), , An example of application of limit state approach for reliability analysis of moisture performance of a building component
      durability: materials and components,

2236. Pike, L., (1996), , Review of correlations of infrared detection techniques for water vapor transmission rates (WVTR) with ASTM e 96-80 and some approaches to gravimetric calibration
      measurement: Infrared, measurement: vapor diffusion properties, WVT,

2237. Pilkey, W. D., (2004), , Formulas for stress, strain, and structural matrices second edition

2238. Pinel, P., Cruickshank, C. A., Beausoleil-morrison, I. and Wills, A., (2011), , A review of available methods for seasonal storage of solar thermal energy in residential applications

2239. Pitts, A., (2008), , Future proof construction--Future building and systems design for energy and fuel flexibilitystar, open

2240. Pjetraj, M., (1996), , VOC Emissions: Influence of VOC Measurement and Reporting Methods on Regulatory Policy and Emissions Estimations
      VOC transport,

2241. Plagge, R., Scheffler, G., Grunewald, J., Funk, M., (2006), , On the hysteresis in moisture storage and conductivity measured by the instantaneous profile method
      material properties: hygrothermal,

2242. Platten, J. K., (2006), , The Soret Effect: A Review of Recent Experimental Results
      HAM: theory and modelling,

2243. Plokker, W. and Hensen, J., (2000), , Research and development in The Netherlands in the area of Building Performance Simulation
      research, funding, simulation of building process,

2244. Poirier, D. and Salcudean, M., (1988), , On numerical methods used in mathematical modeling of phase change in liquid metals

2245. Poissant, Y., Thevenard, D. and Turcotte, D., (2004), , Performance monitoring of the Nunavut arctic college PV system: nine years of reliable electricity generation
      Housing research for the North, PV PV Photovoltaic,

2246. Pomianowski, M., Heiselberg, P. and Zhang, Y., (2013), , Review of thermal energy storage technologies based on PCM application in buildings

2247. Ponessa, J., (1999), , Solving a chimney moisture problem
      moisture damages and problems for buildings, ventilation: pressurization, blower door test,

2248. Ponterio, L., Rizzo, G., Rodono, G., Scaccianoce, G., (1999), , Risk of indoor condensation related to thermal insulation standards
      condensation and evaporation, insulation,

2249. Poovey, H., Mcguigan, F., Townsend, W. and Douglas, D., (2000), , Association Between Reservoirs of Fungal Growth and Air Samples in Residential Structures.
      fungi: assessment, sampling and analysis,

2250. Pope, A. M., Patterson, R. and Burge, H. (Eds), (0), , Indoor allergens: assessing and controlling adverse health effects
      IAQ: Health,

2251. Pope, S.B., (2004), , Ten questions concerning the large-eddy simulation of turbulent flows
      Indoor air movement-CFD,

2252. Portnoy, J. M., (2003), , Sampling for indoor fungi
      fungi: assessment, sampling and analysis,

2253. Posey, J. and J. A. Ulooswyk, (1998), , Exterior insulated finish systems (EIFS) field performance evaluation, Air Quality Indices: A Review
      EIFS,

2254. Posey, J. and Dalgliesh, W. A., (2005), , Thermal Bridges -- Heat flow models with HEAT2 HEAT3, and a general purpose 3-D solver
      simulation: heat transfer, thermal,

2255. Posey, J. B. and Vlooswyk, J. A., (1996), , EIFS: Canadian Field Performance
      aesthetic requirement of building envelope, EIFS, EIFS, fire, smoke, prefabricate buildings, manufactured housing,

2256. Posner, J. D., Buchanan, C. R. and Dunn-rankin, D., (2003), , Measurement and prediction of indoor air flow in a model room
      Indoor air movement-CFD,

2257. Post, N. M., (1999), , Containing noxious mold
      fungi: molds in buildings,

2258. Power, M., (2003), , Mold: new field study
      fungi: damage to buildings,

2259. Prahm, L. P., Berkowicz, R. and Christensen, O., (1979), , Generalization of K Theory for Turbulent Diffusion. Part II: Spectral Diffusivity Model for Plume Dispersion
      Indoor air movement-CFD,

2260. prEN 15026:2004, (2004), , Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
      HAM hygrothermal simulation,

2261. Price D. L. ; Simmons R. B. ; Ezeonu I. M. ; Crow S. A. ; Ahearn D. G. , (1994), , Colonization of fiberglass insulation used in heating, ventilation and air conditioning systems
      fungi and molds in buildings and their envelopes, insulation, ventilation - Air Infiltration and Ventilation in Buildings,

2262. Pries, F., Doree, A., Veen, B.V.D. and Vrijhoef, R., (2004), , The role of leaders' paradigm in construction industry change
      construction industry, market, trend, future,

2263. Privitera, G., Day, A. R., Dhesi, G. and Long, D., (2011), , Optimising the installation costs of renewable energy technologies in buildings: A Linear Programming approach

2264. Pro Pacific Architecture Limited, (1999), , Quality by Design: A Quality Assurance Protocol for Wood-Frame Building Envelopes in British Columbia
      building: condo / condominium, wood frame houses and walls, wood structure,

2265. Professional Equipment, (2003), , The illustrated mold handbook
      fungi and molds in buildings and their envelopes,

2266. Prosen, H. and Zupancic-kralj, L., (1999), , Solid-phase microextraction
      measurement: SPME,

2267. Proskiw, G. and Parekh, A., (2001), , A proposed test procedure for separating exterior envelope air leakage from interior partition air leakage
      ventilation: airtightness, air leakage,,

2268. Proulx, G. and K. Richardson, (2002), , Evacuation: the human factor
      occupancy, occupants, residents, homeowner,

2269. Public Technology Inc and U.S. Green Building Council, (1996), , Sustainable building technical manual: green building design, construction, and operations
      construction industry, design, standards, sustainability, environment,

2270. Puits, R., Resagk, C. and Thess, A., (2007), , Mean velocity profile in confined turbulent convection
      CFD - computational fluid dynamics,

2271. Pulaski, M. H., Horman, M. J. and Riley, D. R., (2006), , Constructability Practices to Manage Sustainable Building Knowledge
      sustainability, environment,

2272. Pullen, S. F., (1996), , Data quality of embodied energy methods
      embodied energy,

2273. Pulselli, R.M., E. Simoncini and S. Bastianoni, (2007), , Emergy analysis of building manufacturing, maintenance and use: Em-building indices to evaluate housing sustainability
      sustainability, environment,

2274. Pushkar, S. and Katz, A., (2005), , A methodology for design of environmentally optimal buildings by variable grouping
      design,

2275. PWC, (2002), , Daylighting guide for Canadian commercial buildings
      building: commercial, office, country: Canada, fungi: legal, law, litigation, insurance issues, lighting, daylighting,

2276. Qin, M ., Ait-mokhtar, R. B. A. and Nilsson, L., (2007), , Nonisothermal moisture transport in hygroscopic building materials: modeling for the determination of moisture transport coefficients
      HAM: material properties,

2277. Qin, M., Belarbi, R., Ait-mokhtar, A. and Nilsson, L., (2009), , Coupled heat and moisture transfer in multi-layer building materials
      HAM: theory and modelling,

2278. Qin, S. J. and Badgwell, T. A., (2003), , A survey of industrial model predictive control technology

2279. Qiu, X., Haghighat, F. and Kumaran, K., (2003), , Modeling moisture accumulation in multi-layered building materials, MODELING MOISTURE IN RESIDENTIAL BUILDINGS WITH A MULTIZONE IAQ PROGRAM
      material properties: hygrothermal,

2280. Qiu, Z., Chow, T., Li, P. C., Ren, J. and Wang, W., (2009), , Performance evaluation of the photovoltaic double-skin facade

2281. Qu, J., Song, J., Qin, J., Song, Z., Zhang, W., Shi, Y., Zhang, T., Zhang, H., Zhang, R., He, Z. and Xue, X., (2014), , Transparent thermal insulation coatings for energy efficient glass windows and curtain walls

2282. Quan, H. and Shih, W. J., (1996), , Assessing reproducibility by the within-subject coefficient of variation with random effects models

2283. Quarles, S. L., (2001), , How durable is structural sheathing?
      OSB - Oriented strandboard, sheathing,

2284. Quarles, S. L., (0), , Physical Limitations of Moisture Meters
      measurement: moisture content,

2285. Quarles, S. L. and Tully, D.F, (0), , Wood durability issues on the long-term performance of wood in service
      durability: building envelope, durability: materials and components, termites, wood, lumber, timber, WRB weather-resistive barrier, house wrap,

2286. Queen's University Applied Sustainability Research Group., (2011), , Renewable Energy in Canadian Aboriginal Remote Communities - Lit Review
      Housing research for the North,

2287. Quesada, G., Rousse, D., Dutil, Y., Badache, M. Halle, O., (2012), , A comprehensive review of solar facades. Opaque solar facades

2288. Quirouette, R., (1999), , On-site exterior wall monitoring methods for air leakage, condensation and rain penetration control problems
      condensation and evaporation, rain penetration, water intrusion, solar energy, radiation, ventilation: airtightness, air leakage,,

2289. Quirouette, R. L., (2001), , Glass and Aluminum Curtain Wall Systems
      curtain wall,

2290. Quirouette, R. L., (1982), , Building envelope design using metal and glass curtain wall systems
      curtain wall, envelope design,

2291. Quirouette, R., Marshall, S. and Rousseau, J., (1991), , Design considerations for an air barrier system
      air barrier, ventilation: airtightness, air leakage,,

2292. Quirouette, R.L., (1996), , The rainscreen wall: a commissioning protocol
      measurement: GC-MS, rain penetration, water intrusion, rainscreen, pressure equalized rainscreen principle,

2293. Quirouette, R.L. and A.C.C. Warnock, (1985), , Basics of Noise Control
      building codes and standards, noise,

2294. R2000, (2001), , R-2000 Standard (2001 edition)
      building: residential, house, home, energy efficiency,

2295. R?berg, U., Lund, M., Terziev, N. and Land, C.J., (2005), , Testing and evaluation of natural durability of wood in above ground conditions in Europe -- an overview

2296. Rajic, N., (2002), , Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structures.
      PCA -- Principal component analysis,

2297. Rajoria, C. S., Agrawal, S. and Tiwari, G. N., (2013), , Exergetic and enviroeconomic analysis of novel hybrid PVT array

2298. Ralegaonkar, R. V. and Gupta, R., (2010), , Review of intelligent building construction: A passive solar architecture approach

2299. Ramos, N. M. and De_freitas, V. P., (2006), , Evaluation strategy of finishing materials contribution to the hygroscopic inertia of a room
      Moisture buffering,

2300. Ramos, N. M. M. and De_Freitas, V. P., (2009), , An experimental device for the measurement of hygroscopic inertia influence on RH variation
      experiment: facility on moisture in building envelope,

2301. Rand, T. G., (2001), , An assessment of mold contamination problems in Atlantic Canada schools: mold burdens, amplifying sites and benefits of proactive school inspection policies
      fungi: molds in buildings, ventilation - Air Infiltration and Ventilation in Buildings,

2302. Rannacher, R., (2001), , Adaptive Galerkin finite element methods for partial differential equations
      mathematics: numerical method, finite difference, finite element,

2303. Rao, C., Burge, H. and Chang, J., (1996), , Review of concentration standards and guidelines for fungi in indoor air
      fungi and molds in buildings and their envelopes, fungi: health effects, standards,

2304. Rao, J., Fazio, P., Bartlett, K. and Yang, D., (2009), , Experimental evaluation of potential transport of mold spores from moldy studs in full-size wall assemblies
      fungi: molds in buildings, fungi: spore, aerosol,

2305. Rao, K. U. and Kishore, V. V. N., (2010), , A review of technology diffusion models with special reference to renewable energy technologies
      Renewable energy,

2306. Rapone, G. and Saro, O., (2012), , Optimisation of curtain wall façades for office buildings by means of PSO algorithm

2307. Rapp, A.O., (2002), , Course of moisture content and moisture risk index of coated and uncoated wood
      wood, lumber, timber,

2308. Rappaport, S. M. and Flynn, M., (2003), , Commentary: Two Seminal Contributions of S. A. Roach to the Evaluation and Control of Hazardous Substances in Air
      IAQ: particulate, dust,,

2309. Rasmussen, T. V., (2002), , Modelling settling of loose-fill insulation in walls, part ii determination of coefficients
      insulation,

2310. Rasmussen, T.V., Fluent Inc, (2003), , Verification of density predicted for prevention of settling of loose-fill cellulose insulation in walls
      insulation,

2311. Ratkowsky, D. A., (1983), , Nonlinear regression modeling: a unified practical approach
      mathematics: error analysis, uncertainty analysis, mathematics: regression analysis / fitting,

2312. Ratti, C., Raydan, D. and Steemers, K., (2002), , Building form and environmental performance: archetypes, analysis and an arid climate
      building, built environment,

2313. Rautiala, S., Reponen, T., Nevalainen, A., Husman, T. and Kalliokoski, P., (1998), , Control of exposure to airborne viable microorganisms during remediation of moldy buildings; report of three case studies
      fungi: exposure investigation, fungi: remediation, treatment, prevention, renovation, repair, maintenance,

2314. Raw, G., Aizlewood, C., Warren, P., (1999), , Indoor Air 99. The 8th International Conference on Indoor Air Quality and Climate. Volume 2
      IAQ - indoor air quality,

2315. Razak, A., C. S. Chua and Toyodab, H., (2004), , Weatherability of coated fabrics as roofing material in tropical environment
      weather data and issues,

2316. Razykov, T. M., Ferekides, C. S., Morel, D., Stefanakos, E., Ullal, H. S. and Upadhyaya, H. M., (2011), , Solar photovoltaic electricity: Current status and future prospects

2317. Reardon, J. T., Shaw, C. Y. and Chown, G. A., (1990), , Ventilation strategies for small buildings, the trend to airtightness
      ventilation: airtightness, air leakage,, ventilation: standards,

2318. Reardon. J. T., Kim A. K., and Shaw, C. Y., (1900), , Balanced fan depressurization method for measuring component and overall air leakage in single-and multifamily dwellings
      ventilation: airtightness, air leakage,,

2319. Redd, S. C., (2002), , State of the science on molds and human health
      fungi: health effects,

2320. Regalado, L. and S¨˘nchez, C., (2002), , Spore morphology as a taxonomic tool in the delimitation of three Asplenium L. species complexes (Aspleniaceae: Pteridophyta) in Cuba
      fungi: spore, aerosol,

2321. Reinhart, C., Fitz, A., (2006), , Findings from a survey on the current use of daylight simulations in building design
      lighting, daylighting,

2322. Reinikainen, L. M. and Jaakkola, J. J. K., (2003), , Significance of humidity and temperature on skin and upper airway symptoms
      health,

2323. Remmele, T. E., (1996), , EIFS Resistance to Water Penetration and Evaluation in Accordance with EIMA Method
      building codes and standards, EIFS, rain penetration, water intrusion,

2324. Ren, P., Jankun, T. M. and Leaderer, B. P., (1999), , Dustborne Alternaria alternata antigens in US homes: results from the National Survey of Lead and Allergens in Housing
      IAQ - indoor air quality,

2325. Ren, P., Jankun, T.M. and Leaderer, B.P, (1999), , Comparisons of seasonal fungal prevalence in indoor and outdoor air and in house dusts of dwellings in one Northeast American county
      fungi: spore, aerosol,

2326. Ren, P., Jankun, T.M., Belanger, K., Bracken, M.B. and Leaderer, B.P, (2001), , The relation between fungal propagules in indoor air and home characteristics
      fungi: moisture damaged house -- indoor microbial concentrations,

2327. REN21, (2008), , Renewables 2007 Global Status Report
      Renewable energy,

2328. REN21, (2010), , Renewables Global Status Report

2329. Reneckis, D., Lafave, J. M., (2005), , Analysis of brick veneer walls on wood frame construction subjected to out-of-plane loads
      brick, masonry, mortar, structural load of building envelope,

2330. Renr, H., (2004), , Construction of a generalized psychrometric chart for different pressures
      maintenance, inspection, and diagnose,

2331. Reponen, M., Seuri, M., Nevalainen, A. and M.-R. Hirvonen, (2002), , Fungal spores as such do not cause nasal inflammation in mold exposure
      fungi: exposure investigation, fungi: health effects,

2332. Reponen, T., (1995), , Aerodynamic diameters and respiratory deposition estimates of viable fungal particles in mold problem dwellings
      fungi: molds in buildings, fungi: spore, aerosol,

2333. Reponen, T., (1994), , Viable fungal spores as indoor aerosols
      fungi: aerobiology, dispersion of spores,, fungi: spore, aerosol,

2334. Reponen, T., Grinshpun, S. A., Aizenberg, V. A., Wang, Z., G¨®rny, R. and Willeke, K., (2000), , Evaluation of a new personal sampler for enumerating airborne spores
      fungi: assessment, sampling and analysis,

2335. Reponen, T., Grinshpun, S. A., Conwell, K. L., Wiest, J. and Anderson, M., (2001), , Aerodynamic versus physical size of spores: measurement and implication for respiratory deposition
      fungi: aerobiology, dispersion of spores,, fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2336. Reponen, T., Hyvarinen, A., Ruuskanen, J., Raunemaa, T. and Nevalainen, A., (1994), , Comparison of concentrations and size distributions of fungal spores in buildings with and without mould problems
      fungi: molds in buildings, fungi: spore, aerosol,

2337. Reponen, T., Lehtonen, M., Raunemaa, T. and Nevalainen, A., (1992), , Effect of indoor sources on fungal spore concentrations and size distributions
      fungi: molds in buildings,

2338. Reponen, T., Willeke, K., Ulevicius, V., Grinshpun, S. A. and Donnelly, J., (1997), , Techniques for dispersion of microorganisms into air
      fungi: aerobiology, dispersion of spores,,

2339. Reponen, T., Willeke, K., Ulevicius, V., Reponen, A. and Grinshpun, S. A., (1996), , Effect of relative humidity on the aerodynamic diameter and respiratory deposition of fungal spores
      fungi: spore, aerosol,

2340. Reponen, T.A., Gazenko, S.V., Grinshpun, S.A., Willeke, K. and Cole, E.C, (1998), , Characteristics of airborne actinomycete spores
      bacteria, fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2341. Reynolds, A. J., (2002), , The scaling of flows of energy and mass through stairwells
      buoyancy air flow,

2342. Rheault, S. and Bilgen, E., (1990), , Experimental study of full-size automated venetian blind windows

2343. Richard, R., (2005), , Industrialised building systems: reproduction before automation and robotic

2344. Richards, R.F., D.M. Burch and W.C. Thomas, (1992), , Water vapor sorption measurements of common building materials
      sorption process: mathematical model,

2345. Richardson, D. B., Vehicles, E., Approaches, t. e. g. r. m. and Impacts,, (2013), , Electric vehicles and the electric grid: A review of modeling approaches, Impacts, and renewable energy integration

2346. Richardson, J.K, (1987), , Fire loss statistics and regulatory framework
      building codes and standards, fire, smoke,

2347. Richman, R. and Pressnail, K. D., (2009), , Quantifying and predicting performance of the solar dynamic buffer zone (SDBZ) curtain wall through experimentation and numerical modeling
      curtain wall,

2348. Richman, R. C. and Pressnail, K. D., (2009), , A more sustainable curtain wall system: Analytical modeling of the solar dynamic buffer zone (SDBZ) curtain wall
      curtain wall,

2349. Richmond-Wiener, J. , Eisner, A. D., Brixey, L. A., Wiener, R. W., (2005), , Transport of airborne particles within a room
      IAQ: particulate, dust,,

2350. Riesner, K., Wang, J., Hagentoft, C. and Mainka, G., (2001), , Combined Heat, Air, and Moisture Transport in Loose-Filled Insulation - Experiment and Simulation
      coupled heat and moisture calculations,

2351. Riethmuller, O. A. M. M. L. and Silva, M. C. G., (2002), , Flowfield characterisation in the wake of a low-velocity heated sphere anemometer
      measurement: anemometer, low air velocity in room,

2352. Riffat, S. B., (1991), , Influence of tracer-gases on the accuracy of interzonal airflow measurements

2353. Riffat, S. B., (1989), , Measurement of heat and mass transfer between the lower and upper floors of a house
      experiment: field testing and monitoring programs,

2354. Riffat, S. B. and Cuce, E., (2011), , A review on hybrid photovoltaic/thermal collectors and systems
      PV/T,

2355. Riley, W. J., Mckone, T. E., Lai, A. C. and Nazaroff, W. W., (2002), , Indoor particulate matter of outdoor origin: importance of size-dependent removal mechanisms
      particle transport, penetration of particulate, through walls,

2356. Ritschkoff, A., Viitanen, H., and Koskela, K., (2000), , The response of building materials to the mould exposure at different response conditions
      envelope materials, fungi: growth and growth model,

2357. Rivard, H., (1994), , Integration of the Building Envelope Design Process
      Fazio's student: thesis,

2358. Rivin, R., (2001), , Building envelope defects and interior mold remediation
      envelope damage, fungi: remediation, treatment, prevention,

2359. Rizzo, S., (1979), , A study of sandwich-panel building structures
      Fazio's student: thesis,

2360. Roach, S. A., (1981), , On the role of turbulent diffusion in ventilation
      Indoor air movement,

2361. Robbins, C. and Morrell, J., (2003), , Mold, housing and wood
      fungi: damage to buildings, fungi: molds in buildings, wood, lumber, timber,

2362. Robbins, C.A., Swenson, L.J., Nealley, M.L., Kelman, B.J. and Gots, R.E., (2000), , Health effects of mycotoxins in indoor air: a critical review
      fungi: components and products,

2363. Robert, A., Kummert, M., (2012), , Designing net-zero energy buildings for the future climate, not for the past

2364. Roberts, B., Nanditha, D. M., Dissanayake, M. and Ku, P. -., (2012), , Angular selective semi-transparent photovoltaics
      BIPV,

2365. Roberts, P. J. W. and Webster, D. R., (2002), , Turbulent diffusion
      Indoor air movement,

2366. Robin, S., (2003), , The two faces of PhD students: management of early careers of French PhDs in life sciences
      research, funding,

2367. Robine, E., Lacaze, I., Moularat, S., Ritoux, S., Boissier, M., (2005), , Characterisation of exposure to airborne fungi: Measurement of ergosterol
      fungi: components and products,

2368. Rode C., Holm A. and Padfield T., (2004), , A review of humidity buffering in the interior spaces
      Whole building HAM: humidity level in houses,

2369. Rode, C., (1998), , Organic insulation materials: effect on indoor humidity and necessity of a vapor barrier
      envelope design, insulation, numerical method in heat and moisture transfer, vapor barrier, vapor retarder, Whole building HAM: humidity level in houses,

2370. Rode, C., (2005), , Moisture buffering of building materials

2371. Rode, C., (2013), , Global building physics

2372. Rode, C. and Burch, D.M, (1995), , Empirical validation of a transient computer model for combined heat and moisture transfer
      coupled heat and moisture calculations, sorption process: mathematical model, validation of models,

2373. Rode, C. and Rudbeck, C., (1998), , Latent heat flow in lightweight roofs and its influence on the thermal performance of buildings
      coupled heat and moisture calculations, roof,

2374. Rode, C., Crhistensen, G. and Vesterlokke, M., (1992), , Moisture conditions of non-ventilated, wood-based, membrane-roof components
      country: Europe, experiment: hygrothermal performance, prefabricate buildings, manufactured housing, roof, wood frame houses and walls, wood structure,

2375. Rode, C., Grau, K., (2007), , The importance of moisture buffering for indoor climate and energy conditions of buildings
      Moisture buffering,

2376. Rode, C., Grau, K., (2003), , Whole-building Hygrothermal Simulation Model
      Whole building HAM,

2377. Rode, C., Grau, K. and Mitamura, T., (2001), , Model and experiments for hygrothermal conditions of the envelope and indoor air of buildings
      surveys, reviews, statistics, Whole building HAM: models,

2378. Rode, C., Kalagasidis, A. S., Gudum, C., Hagentoft, C., Weitzman, P., Peuhkuri, R. and Nielsen, T.R., Holman, J. P., (2000), , International building physics toolbox, general report
      simulation of building process,

2379. Rode, C., Mitamura, T., Schultz, J. and Padfield, T., (2002), , Test cell measurements of moisture buffer effects
      Whole building HAM: models,

2380. Rode, C., Peuhkuri, R., Hansen, K. K., Time, B., Svennberg, K., Arfvidsson, J. and Ojanen, T., (2005), , Moisture Buffer Value of Materials in Buildings

2381. Rode, C., Peuhkuri, R., Time, B., Svennberg, K. and Ojanen, T., (2007), , Moisture buffer value of building materials

2382. Rode, P. C., (1990), , Transient calculation of moisture migration using a simplified description of hysteresis in the sorption isotherms
      HAM: material properties, vapor barrier, vapor retarder,

2383. Rode, R. and Grau, K., (2008), , Moisture buffering and its consequence in whole building hygrothermal modeling

2384. Rodrigues, M. F. S., Teixeira, J. M. C. and Cardoso, J. C. P., (2011), , Buildings envelope anomalies: A visual survey methodology

2385. Roels, S., Carmeliet, J., Hens, H. and Elsen, J., (2000), , Microscopic analysis of imbibition processes in oolitic limestone
      liquid transport, moisture diffusivity, sorption process: mathematical model,

2386. Roels, S., Carmeliet, J., Hens, H., Brocken, H., Cerny, R., Pavlik, Z., Ellis, A. T., Hall, C., Kumaran, K., Pel, L., Plagge, R., (2004), , A comparison of different techniques to quantify moisture content profiles in porous building materials
      measurement: moisture content,

2387. Roels, S., Depraetere, W., Carmeliet, J. and Hens, H., (1999), , Simulating non-isothermal water vapour transfer: an experimental validation on multi-layered building components
      measurement: vapor diffusion properties, WVT, roof,

2388. Roels, S., Janssen, H., (2006), , A comparison of the Nordtest and Japanese test methods for the moisture buffering performance of building materials

2389. Romain, M. K. A. and Nicolas, J., (2005), , Microbial volatile organic compounds as indicators of fungi. Can an electronic nose detect fungi in indoor environments?
      fungi: MVOC - microbial volatile organic compound,

2390. Romano, J., (2003), , Managing Mold, and Lawsuits
      fungi: legal, law, litigation, insurance issues,

2391. Roodman, D.M. and N. Lenssen, (1995), , A building revolution: how ecology and health concerns are transforming construction
      building, built environment, construction industry, construction industry, energy, green building, sustainable building, IAQ - indoor air quality, sustainability, environment,

2392. Roonan, W. W. and Howell, J. F., (1990), , SIROWET -- A comprehensive dynamic full scale curtain wall testing procedure
      curtain wall,

2393. Roots, P., (1997), , Heat transfer through a well insulated external wooden frame wall- an investigation of the effects of normal defects in the insulation resulting from incident wind and air flow through the wall
      CFD - computational fluid dynamics, Indoor air movement-CFD,

2394. Rose, W. B. and McCaa, D. J., (1998), , Temperature and moisture performance of wall assemblies with fiberglass and cellulose insulation
      experiment: hygrothermal performance, fungi: molds in buildings, insulation, OSB - Oriented strandboard, vapor barrier, vapor retarder,

2395. Rose, W.B, (1995), , The history of attic ventilation regulation and research
      building codes and standards, history, ventilation: standards,

2396. Rosiers, J. and Cockburn, J., (1997), , Regulating appliance energy efficiency in Canada -- some similarities and differences with the US
      energy, energy efficiency,

2397. Rosowsky, D. V. and Schiff, S. D., (2002), , Damage, shelter, and other performance issues for buildings in high wind regions
      wind, wind induced pressure on building,

2398. Roulet C.-A., (2001), , Indoor environment quality in buildings and its impact on outdoor environment
      Indoor air movement,

2399. Roulet, and Compagnon, R., (1989), , Multizone tracer gas infiltration measurements--Interpretation algorithms for non-isothermal cases
      tracer gas method for measuring air exchange,

2400. Roulet,C. -A., F. Flourentzoua, H. H. Labbena, M. Santamouris, I. Koronakib, E. Dascalakib and V. Richalet, (2002), , ORME: A multicriteria rating methodology for buildings
      envelope, envelope requirements, PCA -- Principal component analysis,

2401. Rousseau, J., (1983), , Rain penetration and moisture damage in residential construction
      building: residential, house, home, moisture damages and problems for buildings, rain penetration, water intrusion,

2402. Rousseau, M., (1999), , An Overview of the Survey of Building Envelope Failures in the Coastal Climate of British Columbia, Performed by Morrisson-Hershfield Limited for CMHC (1996)
      moisture damages and problems for buildings,

2403. Rousseau, M. J. (Ed.), (1999), , Creating durable bonds between windows and walls
      fungi: molds in buildings, rain penetration, water intrusion, ventilation: airtightness, air leakage,, windows, doors, fenestration,

2404. Rousseau, M. Z., (2002), , Moisture management: prediction of response of exterior wall elements to climates
      material properties: hygrothermal, measurement: hygrothermal properties, Resource: institutes, organization, associations,

2405. Rousseau, M. Z., (2003), , Heat, air and moisture control strategies for managing condensation in walls
      air barrier, HAM: theory and modelling,

2406. Rouxel, T., (2007), , Elastic Properties and Short-to Medium-Range Order in Glasses

2407. Rowan, N.J., Johnstone, C.M., McLean, R.C., Anderson, J.G. and Clarke, J.A., (1999), , Prediction of toxigenic fungal growth in buildings by using a novel modelling system
      fungi: growth and growth model, fungi: health effects, fungi: molds in buildings, simulation: heat transfer, thermal,

2408. Rozyneka, P., Gilges, S., Br¨ąning, T. and Wilhelm, M., (2004), , Quality test of the MicroSeq D2 LSU Fungal Sequencing Kit for the identification of fungi
      fungi: assessment, sampling and analysis,

2409. Rubes, J. M. and Rubes, P. L., (2002), , Buildings: aftermath
      building: damage and failures,

2410. Ruck, N. C., (2006), , International Energy Agency's Solar Heating and Cooling Task 31, ˇ®Daylighting Buildings in the 21st Century'
      lighting, daylighting,

2411. Rucker, P., Holm, A. and Krus, M., (2000), , Determination of moisture and salt content distributions by combining NMR and gamma ray measurements
      measurement: hygrothermal properties, measurement: moisture content,

2412. Rudbeck, C., (1999), , Methods for designing building envelope components prepared for repair and maintenance
      envelope components, envelope design, life cycle assessment (LCA), maintenance, inspection, and diagnose, maintenance, inspection, and diagnose, mathematics: Monte Carlo simulation method, service life prediction,

2413. Rudbeck, C., (2001), , Assessing the service life of building envelope constructions service life of building envelopes
      service life prediction,

2414. Rummel, K. E. D. M. S., (0), , Solar simulation-problems and solutions

2415. Russill, C. and Nyssa, Z., (2009), , The tipping point trend in climate change communication
      climate change, global warming,

2416. Rylander R., (2002), , Endotoxin in the environment -- exposure and effects
      fungi: exposure investigation, fungi: indoor biocontamination -- health symptom,

2417. Rylander, R., (1998), , Microbial cell wall constituents in indoor air and their relation to disease
      fungi: moisture damaged house -- indoor microbial concentrations,

2418. Rylander, R., (1997), , Investigations of the relationship between disease and airborne (1 -> 3)-beta-D-glucan in buildings
      fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations,

2419. Rylander, R., (2001), , Effects after mold exposure -- which are the causative agents?
      fungi: exposure investigation, fungi: health effects, fungi: indoor biocontamination -- health symptom,

2420. Ryszard, G., Olek, W. and Baranowska, H. M., (2000), , Identification of free and bound water content in wood by means of NMR relaxometry
      measurement: moisture content, measurement: moisture content,

2421. Sabariego, S., Guardia, C. D. and Alba, F., (2000), , The effect of meteorological factors on the daily variation of airborne fungal spores in Granada (southern Spain)
      fungi: spore, aerosol,

2422. Sadineni, S. B., Madala, S. and Boehm, R. F., (2011), , Passive building energy savings: A review of building envelope components

2423. Saelens, D. and Hens, H., (2001), , Evaluating the thermal performance of active envelopes
      envelope, thermal analysis and performance,

2424. Sage-lauck, J. S. and Sailor, D. J., (2014), , Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building

2425. Sahal, N. and Lacasse, M. A., (2008), , Proposed method for calculating water penetration test parameters of wall assemblies as applied to Istanbul, Turkey
      rain penetration, water intrusion,

2426. Sahlin, P., Eriksson, L., Grozman, P., Johnsson, H., Shapovalov, A. and Vuolle, M., (2004), , Whole-building simulation with symbolic DAE equations and general purpose solvers
      building: simulation of building processes,

2427. Sa?d, M. N. A., Brown, W. C. and Walker, I. S., (1997), , Long-Term field monitoring of an EIFS clad wall
      EIFS, experiment: field testing and monitoring programs, measurement: moisture content, renovation, repair, maintenance,

2428. Sa?d, M. N. A., W. C. Brown, C. J. Shirtliffe and A. H. P. Maurenbrecher, (1999), , Monitoring of the building envelope of a heritage house: a case study
      experiment: field testing and monitoring programs, experiment: hygrothermal performance, measurement and instrumentation,

2429. Saiz-jimenez, C., (0), , Biodeterioration: An Overview of the State-of-the-Art and Assessment of Future Directions

2430. Sakr, W., Weschler, C. J., Fanger, P. O., (2006), , The impact of sorption on perceived indoor air quality.
      IAQ - indoor air quality,

2431. Salahuddin, A., (1971), , Stresses in the Adhesive Layer of Bonded Mid-Panel Joints Connecting Sandwich Panels
      Fazio's student: thesis,

2432. Salas, V. and Olias, E., (2009), , Overview of the photovoltaic technology status and perspective in Spain

2433. Saleh, A. M., (2012), , Modeling of Flat-Plate Solar Collector Operation in Transient States

2434. Salerno, M., (2000), , British Columbia building envelope research program
      BC leaky condos, experiment: hygrothermal performance,

2435. Salles, C. and Poesen, J., (1999), , Performance of an optical spectro pluviometer in measuring basic rain erosivity characteristics
      measurement and instrumentation, measurement: Infrared, rain, wind driven rain,

2436. Salles, C., Creutin, J. and Sempere-Torres, D., (1998), , The optical spectropluviometer revisited
      measurement and instrumentation, rain,

2437. Salo, P., (2001), , Identifying and preventing fungal contamination problems in new home construction
      envelope design, fungi: molds in buildings, occupancy, occupants, residents, homeowner,

2438. Salomonsson, G. D. and Ambrose, M. D., (1996), , Product comparison methods
      embodied energy,

2439. Salonvaara, M. and Nieminen, J., (1998), , Hygrothermal performance of a new light gauge steel-framed envelope system
      envelope design, envelope performance, measurement: Infrared,

2440. Salonvaara, M. H., (1998), , Prediction of hygrothermal performance of building envelope parts coupled with indoor climate
      Whole building HAM: humidity level in houses, Whole building HAM: models, Whole building HAM: theory and modeling,

2441. Salonvaara, M. H. and A. N. Karagiozis, (1998), , EIFS hygrothermal performance due to initial construction moisture as a function of air leakage, interior cavity insulation, and climate conditions
      drying potential of building envelope, EIFS, OSB - Oriented strandboard, risk analysis, solar driven diffusion,

2442. Salonvaara, M. H. and Karagiozis, A., (1994), , Moisture transport in building envelopes using an approximate factorization solution method
      computer codes for heat-air-moisture transfer,

2443. Salonvaara, M. H., Ojanen, T., Kokko, E. and Karagiozis, A. N., (1998), , Drying capabilities of wood frame walls with wood siding
      cavity wall, cladding, siding, veneer, drying potential of building envelope, experiment: hygrothermal performance, experiment: laboratory, HAM: experimental work, HAM: theory and modelling, moisture engineering, testing facility, wood frame houses and walls, wood structure,

2444. Salonvaara, M. Karagiozis, A., and Holm, A., (2001), , Stochastic building envelope modeling -- the influence of material properties
      HAM: computer models, mathematics, mathematics: Monte Carlo simulation method, mathematics: stochastical modeling and analysis,

2445. Samimi, B., Jalocon, A., Quintana, J., Bufalino, C. and Delfino, R., (2002), , Effect of high relative humidity on performance of pdr-100 nephelometric aerosol monitor for sampling ambient particulate within a controlled environmental chamber
      fungi: assessment, sampling and analysis,

2446. Samson, A., (2001), , Ecology, detection and identification problems of moulds in indoor environments
      fungi: assessment, sampling and analysis, fungi: molds in buildings,

2447. Samson, R. and B. Flannigan, (1994), , Health implications of fungi in indoor environments
      fungi: health effects,

2448. Samuel, D. G. L., Nagendra, S. M. S. and Maiya, M. P., (2013), , Passive alternatives to mechanical air conditioning of building: A review

2449. Samuelson, I., (1998), , Hygrothermal performance of attics
      attic, crawl space, ceiling,, envelope performance,

2450. Samuelson, I., (2000), , Prevention of moisture and mould damages in buildings
      fungi: molds in buildings, moisture control, moisture management,

2451. Samuelson, I. and Nielsen, A., (2002), , Checklists for clean and moisture safe buildings
      maintenance, inspection, and diagnose,

2452. Sandberg, M. and Stymne, H., (1985), , A quantitative estimate of the accuracy of tracer gas methods for the determination of the ventilation flow rate in buildings
      ventilation: measurement,

2453. Sanders, C., (1996), , IEA-Annex 24, Final Report, Volume 2, Task 2: Environmental conditions
      HAM: theory and modelling,

2454. Sanders, C. H., (1995), , Design parameters used to avoid interstitial condensation for a range of climates
      condensation and evaporation,

2455. Sanjuan, C., (2011), , Maria Nuria S¨˘nchez, Maria del Rosario Heras, Eduardo Blanco, Experimental analysis of natural convection in open joint ventilated fa??ades with 2D PIV

2456. Sano, E. E., Moran, M. S., Huete, A. R. and Miura, T., (2003), , A new empirical model to retrieve soil moisture and roughness from C-band radar data
      measurement and instrumentation,

2457. Santamouris, A. P. M. and Asimakopoulos, D. N., (2001), , Buoyancy-driven flow through a stairwell
      buoyancy air flow,

2458. Santilli, J., (2002), , Health effects of mold exposure in public schools
      building types, fungi: exposure investigation, fungi: health effects, fungi: molds in buildings,

2459. Santos, G.H.D. and Mendes, N., (2009), , Combined Heat, Air and Moisture (HAM) Transfer Model for Porous Building Materials

2460. Santosa, G. H. d., Mendesa, N. and Philippib, P. C., (2009), , A building corner model for hygrothermal performance and mould growth risk analyses

2461. Saraf, A., Larsson, L., Burge, H. and Milton, D., (1997), , Quantification of ergosterol and 3-hydroxy fatty acids in settled house dust by gas chromatography-mass spectrometry: Comparison with fungal culture and determination of endotoxin by a Limulus amebocyte lysate assay
      fungi: components and products,

2462. Sarhaddi, F., Farahat, S., Ajam, H., Behzadmehr, A. and Adeli, M. M., (2010), , An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector
      PV/T, PV/T,

2463. Sartori, E., (2000), , A critical review on equations employed for the calculation of the evaporation rate from free water surfaces
      condensation and evaporation,

2464. Sartori, I., Napolitano, A. and Voss, K., (2012), , Net zero energy buildings: A consistent definition framework

2465. Sassi, O., Sifrini, I., Dumas, J. P. and Clausse, D., (1988), , Theoretical curves in thermal analysis for the melting of binaries showing solid solutions

2466. Sathyanarayanan, R., Derome, D. and Rivard, H., (2003), , The need for an integrated computer-based tool to support building envelope design
      design, HAM: application,

2467. Sato, N., Vittorino, F. and Brazolin, S., (2000), , Humidity and development of mold on internal surfaces of building walls
      condensation and evaporation, fungi: molds in buildings,

2468. Sautour, M., Dantigny, P., Divies, C., Bensoussan, M., (2001), , A temperature-type model for describing the relationship between fungal growth and water activity
      fungi: growth and growth model,

2469. Savilahti, R., J. Uitti, et al., (2001), , Increased prevalence of atopy among children exposed to mold in a school building
      fungi and molds in buildings and their envelopes, fungi: exposure investigation, fungi: health effects,

2470. Savory, E., Sabarinathan, J., Sauer, A. and Scott, J. A., (2012), , An optoelectronic sensor for the monitoring of mould growth in concealed spaces

2471. Sawers, J., (1999), , Buildings: soft benefits
      green building, sustainable building,

2472. Saxena, J., Munimbazi, C., and Bullerman, L. B., (2001), , Relationship of mould count, ergosterol and ochratoxin A production
      fungi: components and products, fungi: components and products,

2473. Scalat, S., Banu, D., Hawes, D., Parish, J., Haghighata, F. and Feldman, D., (1996), , Full scale thermal testing of latent heat storage in wallboard

2474. Scanada Consultants Limited and CanAm Building Envelope Specialists Inc, (1991), , Development of design procedures and guidelines for reducing electric demand by air leakage control in high-rise residential buildings: final report
      building: highrise, building: residential, house, home, guideline, ventilation: airtightness, air leakage,,

2475. Scannapieco, E. and Harlow, F. H., (0), , Introduction to finite difference methods for numerical fluid dynamics
      CFD - computational fluid dynamics, mathematics,

2476. Schajer, G. S. and Orhan, F., (2006), , Measurement of wood grain angle, moisture content and density using microwaves (Messung der Faserneigung, der Holzfeuchte und der Rohdichte mittels Mikrowellen)
      wood, lumber, timber,

2477. Schalin A. and Nielsen P. V., (2004), , Impact of turbulence anisotropy near walls in room airflow
      IAQ: CFD, Indoor air movement-CFD,

2478. Scheffer, T. C. and Moses, C. S., (1993), , Survey of moisture content in houses for evidence of decay susceptibility

2479. Schijndel, A. W. M. v., (2008), , Estimating values for the moisture source load and buffering capacities from indoor climate measurements
      experiment: facility on moisture in building envelope, Moisture buffering,

2480. SCHL, (1998), , Building Solutions: A Problem Solving Guide for Builders and Renovators
      renovation, repair, maintenance,

2481. Schleibinger, H., Laussmann, D., Bornehag, C. -. and Eis, D., (2008), , Microbial volatile or-ganic compounds in the air of moldy and mold-free indoor environments

2482. Schleibinger, H., Laussmann, D., Bornehag, C., Eis, D. and Rueden, H., (2008), , Microbial volatile organic compounds in the air of moldy and mold-free indoor environments
      fungi: MVOC - microbial volatile organic compound,

2483. Schleibinger, H., Lau?mann, D., Brattig, C., Mangler, M., Eis, D. and Ruden, H., (2005), , Emission patterns and emission rates of MVOC and the possibility for predicting hidden mold damage?

2484. Schmidt, G. R., Nadarajah, A., Chung, T. J. and Karr, G. R., (1995), , Influence of two-phase thermocapillary flow on liquid retention in microscopic pores
      liquid transport, moisture diffusivity,

2485. Schmidt-doehl, F. and Rostasy, F. S., (1999), , Model for the calculation of combined chemical reactions and transport processes and its application to the corrosion of mineral-building materials: Part I. Simulation model
      envelope damage, moisture transport in porous materials,

2486. Schneider, T., Jensen, K. A., Clausen, P. A., Afshari, A., Gunnarsen, L., Wahlin, P., Glasius, M., Palmgren, F. and Nielsen, O. J., (2004), , Prediction of indoor concentration of 0.5--4 mm particles of outdoor origin in an uninhabited apartment
      particle transport, penetration of particulate, through walls,

2487. Schober, G., (2001), , Detection of moulds in interiors
      fungi: assessment, sampling and analysis,

2488. Schreiber, F.W., (2000), , Perceived Air Quality: Investigation of the Non-Sensory Odor Assessment in Indoor Environments
      IAQ - indoor air quality, IAQ: Health,

2489. Schroeder, C. Krarti, M., and Brandemuehl, M. J., (2000), , Error analysis of measurement and control techniques of outside air intake rates in VAV systems
      mathematics: error analysis, uncertainty analysis, ventilation - Air Infiltration and Ventilation in Buildings,

2490. Schumacher, C. J., (2008), , Hygrothermal performance of insulated, sloped, wood-framed roof assemblies
      experiment: hygrothermal performance,

2491. Schwartz, N. V., Bomberg, M., and Kumaran, M. K., (1996), , Water vapor transmission and moisture accumulation in polyurethane and polyisocyanurate foams
      insulation, measurement: vapor diffusion properties, WVT,

2492. Schwarze, F., (2007), , Wood decay under the microscope
      fungi: damage to buildings,

2493. Scofield, J. H., (2009), , Do LEED-certified buildings save energy? Not really...
      LEED,

2494. Scott, R., Aia, N. and Macphaul, D., (2005), , Pioneering Building Envelope Commissioning to Prevent Moisture Intrusion
      envelope, moisture damages and problems for buildings, moisture source for building envelope,

2495. Seaden, G., (1997), , The future of national construction research organizations--scenarios for the changing roles, functions, research agendas and funding
      construction industry, country: Canada, research, funding, Resource: institutes, organization, associations,

2496. Seaden, G., (2002), , Changing more than R&D: responding to the Fairclough Review
      country: Europe, research, funding,

2497. Sedlbauer, K., (2002), , Prediction of mould growth by hygrothermal calculation
      fungi: growth and growth model, HAM hygrothermal simulation,

2498. Sedlbauer, K., (2002), , Prediction of mould fungus formation on the surface of and inside building components
      fungi: growth and growth model,

2499. Sedlbauer, K. and Krus, M., (2002), , Information and Technology Transfer from IBP: Mold Growth on ETICS (EIFS) as a Result of "Bad Workmanship"?
      fungi: growth and growth model,

2500. Sedlbauer, K., Krus, M. and Zillig, W., (2002), , A new model for mould prediction and its application on dwellings with mould on the outer facades
      fungi: growth and growth model,

2501. Sedlbauer, K., Krus, M., Zillig, W. and K¨ąnzel, H. M., (2001), , Mold growth prediction by computational simulation
      building: simulation of building processes, fungi: growth and growth model,

2502. Sen, Z., (2008), , Solar energy fundamentals and modeling techniques - atmosphere, environment, climate change and renewable energy
      energy, Renewable energy, Renewable energy: solar, solar energy, radiation, solar: utilization of solar energy,

2503. Sen, Z., (2004), , Solar energy in progress and future research trends

2504. Sepp?nen, O. and Fisk, W. J., (2002), , Association of ventilation system type with SBS symptoms in office workers
      building: commercial, office, IAQ: sick building syndrome, SBS, ventilation - Air Infiltration and Ventilation in Buildings,

2505. Serrette, R.L., J. Encalada, M. Juadines, and H. Nguyen, (1997), , Static Racking Behavior of Plywood, OSB, Gypsum, and FiberBoard Walls with Metal Framing
      OSB - Oriented strandboard, wood: engineered products,

2506. Servpro Industries, Inc, (2001), , Understanding mold in the property restoration industry
      fungi and molds in buildings and their envelopes, fungi: damage to buildings, fungi: health effects, fungi: legal, law, litigation, insurance issues,

2507. Sha, K., (2004), , Construction business system in China: an institutional transformation perspective
      construction industry,

2508. Shah, L. J. and Furbo, S., (2004), , Vertical evacuated tubular-collectors utilizing solar radiation from all directions

2509. Shah, M. M., (2002), , Evaluation of available correlations for rate of evaporation from undisturbed water pools to quiet air
      condensation and evaporation,

2510. Shahid, H. and Naylor, D., (2005), , Energy performance assessment of a window with a horizontal Venetian blind

2511. Shakun, W., (1992), , Causes and control of mold and mildew in hot and humid climates
      fungi: molds in buildings,

2512. Shameri, M. A., Alghoul, M. A., Sopian, K., Zain, M. F. M. and Elayeb, O., (2011), , Perspectives of double skin facde systems in buildings and energy saving

2513. Shamlo, N.B., (2005), , Matlab Toolbox for High Resolution Vector Field Visualization with Application in Improving the Understanding of Crack Propagation Mechanisms

2514. Shan, F., Tang, F., Cao, L. and Fang, G., (2014), , Performance evaluations and applications of photovoltaic-thermal collectors and systems

2515. Shao, J., Liu, J., Zhao, J., Zhang, W., Sun, D. and Fu, Z., (2009), , A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof
      HAM: experimental work,

2516. Shao, L., Sharples, S., Ward, I. C., (1993), , Tracer gas mixing with air
      tracer gas method for measuring air exchange,

2517. Shaw, C. Y., (1980), , Methods for conducting small scale pressurization tests and air leakage data of multi storey apartment buildings
      ventilation: airtightness, air leakage,,

2518. Shaw, C. Y., (1987), , Mechanical Ventilation and Air Pressure in Houses
      ventilation: measurement,

2519. Shaw, C. Y., Magee, R. J. and Poirier, G. F., (2000), , Measured airtightness of an installed skylight
      ventilation: airtightness, air leakage,,

2520. Sheltersource, Inc., (2002), , Evaluating Minnesota homes final report
      building,

2521. Shelton, B. G., Kirkland, K. H., Flanders, W. D. and Morris, G. K., (2002), , Profiles of airborne fungi in buildings and outdoor environments in the United States
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2522. Shen, H., Tan, H., and Tzempelikos, A., (2011), , The effect of reflective coatings on building surface temperatures, indoor environment and energy consumption--An experimental study

2523. Sherman, M. and Matson, M.S., (0), , Residential ventilation and energy characteristics
      energy, Standards: ASHRAE, ventilation - Air Infiltration and Ventilation in Buildings,

2524. Sherman, M. and Palmiter, L., (1995), , Uncertainties in fan pressurization measurements
      mathematics: error analysis, uncertainty analysis, mathematics: regression analysis / fitting, ventilation: airtightness, air leakage,,

2525. Sherman, M. H., (0), , Infiltration Degree-Days: A Statistic for Quantifying Infiltration-Related Climate
      Standards: ASHRAE, ventilation: airtightness, air leakage,,

2526. Sherman, M. H., (1999), , ASHRAE'S Residential Ventilation Standard: Exegesis of Proposed Standard 62.2
      Standards: ASHRAE, ventilation: airtightness, air leakage,,

2527. Sherman, M. H., (1989), , Uncertainty in air flow calculations using tracer gas measurements

2528. Sherman, M. H., (0), , Air Infiltration Measurement Techniques
      tracer gas method for measuring air exchange, ventilation: measurement,

2529. Sherman, M. H., (1997), , Multizone age-of-air analysis
      ventilation: air flow models, multi zone model,

2530. Sherman, M. H., (2004), , ASHRAE'S First Residential Ventilation Standard
      Standards: ASHRAE, ventilation: standards,

2531. Sherman, M. H., (1989), , On the estimation of multizone ventilation rates from tracer gas measurements

2532. Sherman, M. H., (1990), , Tracer-gas techniques for measuring ventilation in a single zone

2533. Sherman, M. H., Chan, R., (2004), , Building airtightness: research and practice
      air barrier, surveys, reviews, statistics, ventilation: airtightness, air leakage,, WRB weather-resistive barrier, house wrap,

2534. Sherman, M., Dickerhoff, D., (1994), , Air-tightness of US. Dwellings
      ventilation: airtightness, air leakage,, ventilation: pressurization, blower door test,

2535. Sherwood, G. E., (1983), , Condensation potential in high thermal performance walls -- cold winter climate
      condensation and evaporation, condensation and evaporation, experiment: facility on moisture in building envelope, experiment: hygrothermal performance -- Field testing, wood frame houses and walls, wood structure,

2536. Sherwood, G.E. and R. C. Moody, (1989), , Light-frame wall and floor systems - analysis and performance
      envelope performance, wood frame houses and walls, wood structure,

2537. Shevlin, J., (1996), , Successes and ongoing challenges - the international policy response to ozone depletion and its implications for health
      Ozone depletion,

2538. Shi, L. and Chew, M.Y.L., (2012), , A review on sustainable design of renewable energy systems

2539. Shi, X., Johnson, P., Burnett, E., (2007), , Uncertainty analysis for vapor pressure measurement
      mathematics: error analysis, uncertainty analysis,

2540. Shi, X., Memon, S. A., Tang, W., Cui, H. and Xing, F., (2014), , Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels

2541. Shibaike, H. and Karagiozis, A., (1998), , Boundary element analysis of uncoupled quasi-static hygrothermoelasticity for two-dimensional composite walls
      HAM hygrothermal simulation,

2542. Shih, N. and Huang, Y., (2001), , An analysis and simulation of curtain wall reflection glare
      curtain wall,

2543. Shipworth, D., (2001), , A stochastic framework for embodied greenhouse gas emissions modelling of construction materials
      green building materials, greenhouse gas emissions, mathematics: stochastical modeling and analysis, mathematics: stochastical modeling and analysis,

2544. Shirakawa, M. A., Beech, I. B., Tapper, R., Cincotto, M. A. and Gambale, W., (2003), , The development of a method to evaluate bioreceptivity of indoor mortar plastering to fungal growth
      fungi: molds in buildings,

2545. Shohet, I. M., Puterman, M. and Gilboa, E., (2002), , Deterioration patterns of building cladding components for maintenance management
      building: damage and failures, cladding, siding, veneer, envelope damage, experiment: laboratory, mathematics: statistics, standards,

2546. Short, S., (2000), , Allergens in the home: a review
      fungi: health effects, fungi: indoor biocontamination -- health symptom, surveys, reviews, statistics,

2547. Shoukri, M., Elkum, N. and Walter, S.D., (2006), , Interval estimation and optimal design for the within-subject coefficient of variation for continuous and binary variables

2548. Shukla, R., Sumathy, K., Erickson, P. and Gong, J., (2013), , Recent advances in the solar water heating systems: A review

2549. Shum, M. and Goodman, M., (2002), , An overview of the health effects due to mold exposure, An Overview of Residential Ventilation Activities in the Building America Program (Phase I)
      fungi: exposure investigation, fungi: health effects,

2550. Shutov, A. I. and Lakhmetkin, I. V., (1998), , Approximation of temperature dependence of the modulus of elasticity of glass

2551. Sigsgaard, T., Jensen, H. L. C., Nichum, E., Gravesen, S., Larsen, L., Hansen, M. ?., (2001), , Symptoms associated to work in a water damaged school building
      fungi: damp house -- health, fungi: health effects,

2552. Sill, B. L., (1983), , Free and forced convection effects on evaporation
      condensation and evaporation,

2553. Simmler, H. and Binder, B., (2008), , Experimental and numerical determination of the total solar energy transmittance of glazing with venetian blind shading

2554. Sim?es, Branco, B. and A. Tadeu, (2002), , Definition of two-dimensional condensation via BEM, using the Glaser method approach
      condensation and evaporation, HAM: simplified models - simplification, mathematics: numerical method, finite difference, finite element,

2555. Simonson, C. J., (2000), , Moisture, thermal and ventilation performance of Tapanila ecological house
      HAM: application,

2556. Simonson, C. J., Ojanen, T. and Salonvaaray, M., (2005), , Moisture performance of an airtight, vapor-permeable building envelope in a cold climate
      envelope performance,

2557. Simonson, C. J., Salonvaara, M. and Ojanen, T., (2000), , Improving indoor climate and comfort with wooden structures
      computer codes for heat-air-moisture transfer, wood frame houses and walls, wood structure,

2558. Simonson, C. J., Salonvaara, M., Ojanen, T., (2004), , Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part II --verification and numerical studies
      Whole building HAM,

2559. Simonson, C. J., Salonvaara, M., Ojanen, T., (2004), , Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part I -- field measurements
      HAM: experimental work, tracer gas method for measuring air exchange,

2560. Simonson, C. J., Salonvaara, M., Ojanen, T., Walker, I. and Levin, H., (2004), , Measuring and modeling vapor boundary layer growth during transient diffusion heat and moisture transfer in cellulose insulation
      HAM: theory and modelling, insulation,

2561. Simpson, W. T., Liu, J. Y., (1997), , An optimization technique to determine red oak surface and internal moisture transfer coefficients during drying
      wood, lumber, timber,

2562. Singh, J., (2001), , Occupational exposure to moulds in buildings
      fungi: molds in buildings,

2563. Singh, J., (1994), , Building mycology -- management of decay and health in buildings
      fungi and molds in buildings and their envelopes, fungi: molds in buildings,

2564. Sippola, M. R. and Nazaroff, W. W., (0), , Particle deposition from turbulent flow: review of published research and its applicability to ventilation ducts in commercial buildings
      IAQ: particulate, dust,,

2565. Sivanandan, A., (2009), , BIPV hotspots in the EU
      BIPV,

2566. Sivasubramani, S. K., Niemeier, R. T., Reponen, T. and Grinshpun, S. A., (2004), , Fungal spore source strength tester: laboratory evaluation of a new concept
      fungi: assessment, sampling and analysis,

2567. Siy, E., L. Koziol and D. Rollins, (2001), , The state of the states: assessing the capacity of states to achieve sustainable development through green planning
      Education, training, green building, sustainable building, sustainability, environment,

2568. Sj?str?m, C. (Ed), (2004), , Guide and bibliography to service life and durability research for buildings and components
      durability: building envelope, durability: materials and components,

2569. Skerlj, P.S. and D. Surry, (1994), , A study of mean pressure gradients, mean cavity pressures, and resulting residual mean pressures across a rainscreen for a representative building
      cavity wall, rainscreen, pressure equalized rainscreen principle,

2570. Skinner, E. A., (1996), , A Guide to Constructs of Control

2571. Skoplaki, E. and Palyvos, J. A., (2009), , Operating temperature of photovoltaic modules: A survey of pertinent correlations
      PV/T,

2572. Skoplaki, E. and Palyvos, J. A., (2009), , On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations

2573. Small, B. M., (2002), , Indoor air pollutants in residential settings: respiratory health effects and remedial measures to minimize exposure
      IAQ - indoor air quality,

2574. Smith III, JO, (2007), , Mathematics of the discrete fourier transform (DFT) with audio applications--second edition
      mathematics,

2575. Smith, I. S., Asiz, M. and Vasic, A., (2007), , Failure mechanisms in wood-based materials: A review of discrete, continuum, and hybrid finite-element representations

2576. Smith, L. C., (2010), , The World in 2050: Four Forces Shaping Civilization's Northern Future

2577. Smith, R. C., (2009), , Vapour diffusion control in framed wall systems insulated with spray polyurethane foam
      experiment: laboratory,

2578. Smulski, S., (1999), , Durability of energy-efficient wood-frame houses
      condensation and evaporation, durability: building envelope, fungi: molds in buildings, moisture in buildings, OSB - Oriented strandboard, technology transfer, Whole building HAM: humidity level in houses, wood frame houses and walls, wood structure,

2579. Smulski, S., (1996), , Wood-destroying fungi in residential construction
      building: residential, house, home, fungi and molds in buildings and their envelopes, fungi: damage to buildings, fungi: legal, law, litigation, insurance issues, wood, lumber, timber,

2580. Snape, P. and B. Atkinson, (1999), , Mapping rainfall distribution characteristics on facades using surface deposit geometry
      rain on walls, rain precipitation, wind driven rain,

2581. Snell, J., (2009), , Inspection Standards & Protocols for Building Thermographers: Overview of Standards for Infrared Inspections of Buildings

2582. Soares, N., Costa, J. J., Gaspar, A. R. and Santos, P., (2013), , Review of passive PCM latent heat thermal energy storage systems towards buildings energy efficiency

2583. Soares, N., Gaspar, A. R., Santos, P. and Costa, J. J., (2014), , Multi-dimensional optimization of the incorporation of PCM-drywalls in lightweight steel-framed residential buildings in different climates

2584. Sobhnamayan, F., Hamidi, A., Monavari, H. R., Sarhaddi, F., Farahat, S. and Alavi, M. A., (2011), , Performance evaluation of a solar photovoltaic thermal air collector using energy and exergy analysis
      PV/T,

2585. Sobue, N., (2000), , Measurement of moisture gradient in wood by Electrode Scanning Moisture Analysis ESMA
      measurement: moisture content,

2586. Sockol, M. D., Raichlenl, D. A. and Pontzer, H., (0), , Chimpanzee locomotor energetics and the origin of human bipedalism
      built environment,

2587. S?derstr?m, O., (1999), , On analysis of cup method measurements on hygroscopic materials with surface coatings
      measurement: vapor diffusion properties, WVT, risk analysis,

2588. Soebarto, V.I. and T.J. Williamson, (2002), , Multi-criteria assessment of building performance: theory and implementation
      envelope performance,

2589. Solangi, K. H., Islam, M. R., Saidur, R., Rahim, N. A., Fayaz, H., (2011), , A review on global solar energy policy

2590. Solanki, S. C., Dubey, S. and Tiwari, A., (2009), , Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors

2591. Solar Energy Laboratory, (1994), , TRNSYS a Transient System Simulation Prograni
      computer codes for energy calculations, coupled energy and airflow calculation,

2592. Solomon, S., D. Qin, M. Manning, Z. Chen, M. Marquis, K.B. Averyt, M. Tignor and H.L. Miller (eds.), (2007), , Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change
      climate change, global warming,

2593. Somarathne, S., Seymour, M. and Kolokotroni, M., (2004), , Transient solution methods for dynamic thermal modelling within CFD
      IAQ: CFD, thermal analysis and performance,

2594. Song, J., An, Y., Kim, S., Lee, S., Yoon, J. and Choung, Y., (2008), , Power output analysis of transparent thin-film module in building integrated photovoltaic system (BIPV)
      BIPV,

2595. Song, S., Yi, J. and Koo, B., (2008), , Insulation plan of aluminum curtain wall-fastening unit for high-rise residential complex
      curtain wall,

2596. S?rensen, D. N. and Nielsen, P. V., (2003), , Quality control of computational fluid dynamics in indoor environments
      IAQ: CFD, Indoor air movement-CFD,

2597. Sorensen, E., (1999), , 150 to 200 condominiums in city may be leaking
      building: condo / condominium, surveys, reviews, statistics,

2598. Sorensen, E., (1998), , Condo owners' deluge of woe
      BC leaky condos, building: condo / condominium, EIFS damage, fungi: legal, law, litigation, insurance issues, moisture damages and problems for buildings, Resources: statistics,

2599. Sorenson, W. G., (1999), , Fungal spores: hazardous to health?
      fungi: spore, aerosol,

2600. Sottile, G. M., (2005), , 2004 Survey of United States architects on the subject of switchable glazings
      windows, doors, fenestration,

2601. Sozer, H., (2002), , Identification of barriers to the building integrated photovoltaic design process as applied to curtain-wall
      BIPV, Renewable energy: solar,

2602. Sozer, H. and Elnimeiri, M., (2007), , Critical Factors in Reducing the Cost of Building Integrated Photovoltaic (BIPV) Systems
      BIPV,

2603. Sparks, L. E., Tichenor, B. A., Chang, J. and Guo., Z., (1996), , Gas-phase mass transfer model for predicting volatile organic compound (VOC) emission rates from indoor pollutant sources
      IAQ - indoor air quality, VOC,

2604. Spelter, H., (1996), , Emerging nonwood building materials in residential construction
      building: residential, house, home, material,

2605. Spelter, H. and Alderman, M., (2005), , Profile 2005 : softwood sawmills in the United States and Canada
      wood, lumber, timber,

2606. Spelter, H., McKeever, D., and Durbak, I., (1999), , Review of wood-based panel sector in United States and Canada
      construction industry, OSB - Oriented strandboard, wood, lumber, timber,

2607. Spengler, J. D., Chen, Q., (2000), , Indoor air quality factors in designing a healthy building
      IAQ - indoor air quality, IAQ - indoor air quality,

2608. Spengler, J.D, (2002), , Research futures for healthy indoor air
      IAQ - indoor air quality, research, funding,

2609. Spengler, J.D. and K. Sexton, (1983), , Indoor air pollution: A public health perspective
      IAQ - indoor air quality,

2610. Spicer, R. and Gangloff, H., (2002), , Characterization of relational descriptors of bioaerosol data
      fungi: assessment, sampling and analysis, fungi: molds in buildings,

2611. Spicer, R. and Gangloff, H., (2005), , Establishing site specific reference levels for fungi in outdoor air for building evaluation
      fungi: aerobiology, dispersion of spores,,

2612. Spicer, R.C. and Gangloff, H.J, (2000), , Limitations in application of Spearman's rank correlation to bioaerosol sampling data
      fungi: assessment, sampling and analysis, fungi: moisture damaged house -- indoor microbial concentrations, mathematics: statistics,

2613. Spolek, C. A. and Piroozmandi, F., (1996), , Measurement of unsaturated wood permeability by transient flow methods
      HAM: material properties, measurement: vapor diffusion properties, WVT, wood, lumber, timber,

2614. Springfield, J., (2005), , Discussion of ˇ°Study of Recent Building Failures in the United Statesˇ± by Kumalasari Wardhana and Fabian C. Hadipriono.

2615. Sprinz, D. and Luterbacher, U. (ed.), (1996), , International Relations and Global Climate Change
      climate change, global warming,

2616. Spurgeo, J., (2004), , Interpreting airborne data
      fungi: spore, aerosol,

2617. Spurgeon, J., (2003), , The collection and interpretation of wall cavity samples
      fungi: assessment, sampling and analysis,

2618. Spurgeon, J., (2006), , A new filter cassette for the direct microscopic examination of airborne fungal spores

2619. Spurgeon, J. C., (2003), , A method for detecting fungal contaminants in wall cavities
      fungi: assessment, sampling and analysis, fungi: mold in walls -- indoor microbial concentrations, fungi: molds in buildings, fungi: Stachybotrys,

2620. Stamenic, L., Smiley, E. and Karim, K., (2004), , Low light conditions modelling for building integrated photovoltaic (BIPV) systems

2621. Stamou, A., Katsiris, I., (2006), , Verification of a CFD model for indoor airflow and heat transfer
      CFD - computational fluid dynamics, Indoor air movement-CFD,

2622. Stang, B. D., Nicolajsen, A. and Hansen, M. H., (2002), , Moisture in combined concrete timber-frame walls without vapour barrier
      concrete, experiment: field testing and monitoring programs, experiment: hygrothermal performance, HAM: application, vapor barrier, vapor retarder, wood frame houses and walls, wood structure,

2623. Statistics Canada, (2009), , 2009 Statistics Canada Electric Power generation, transmission and distribution
      statistics,

2624. Statsoft, I., (2006), , Electronic Statistics Textbook
      statistics,

2625. Steeman, H. J., Janssens, A. and Paepe, M., (2006), , CFD modelling of HAM transport in buildings: The importance of local indoor climate
      Indoor air movement-CFD,

2626. Steeman, H. J., Janssens, A., Carmelietc, J. and Paepe M., (2009), , Modelling indoor air and hygrothermal wall interaction in building simulation: Comparison between CFD and a well-mixed zonal model
      Whole building HAM,

2627. Steeman, H., Janssens, A. and Paepe, M., (2009), , On the applicability of the heat and mass transfer analogy in indoor air flows
      HAM: theory and modelling,

2628. Steeman, H., T'joen, C., Belleghem, M. V., Janssens, A. and Paepe, M., (2009), , Evaluation of the different definitions of the convective mass transfer coefficient for water evaporation into air

2629. Steeman, H.J., Van_Belleghem, M. V., Janssens, A. and Paepe, M., (2009), , Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage
      simulation of building process,

2630. Steeman, M., Belleghem, M. V., Paepe, M. and Janssens, A., (2010), , Experimental validation and sensitivity analysis of a coupled BES-HAM model

2631. Steeman, M., Janssens, A., Steeman, H. J., Belleghem, M. V. and Paepe, M., (2010), , On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model
      Whole building HAM,

2632. Steeman, M., Paepe, M. and Janssens, A., (2010), , Impact of whole-building hygrothermal modelling on the assessment of indoor climate in a library building
      Moisture buffering,

2633. Steemers, K., (2003), , Towards a research agenda for adapting to climate change
      change in building design, construction, climate change, global warming, green building, sustainable building,

2634. Stehn, L., (2002), , Environmental labelling of timber-framed dwellings and their building components
      wood, lumber, timber,

2635. Stephenson, D. G., (2003), , Thermal diffusion of water vapor through glass fiber insulation
      HAM: theory and modelling, insulation,

2636. Sterling, D.A. and Lewis, R.D., (1998), , Pollen and fungal spores indoor and outdoor of mobile homes
      fungi: spore, aerosol, fungi: spore, aerosol,

2637. Sterling, M. and Levetin, C.R.&.E, (1999), , An evaluation of two methods used for microscopic analysis of airborne fungal spore concentrations from the Burkard spore trap
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2638. Stern, M. A., Allitt, U., Corden, J. and Millington, W., (1999), , The investigation of fungal spores in intramural air using a Burkard continuous recording air sampler
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2639. Stetzenbach, L. D., Buttner, M. P. and Meldrum, J. R., (1993), , Indoor air investigations and controlled laboratory studies using a variety of aerobiological samplers
      fungi: assessment, sampling and analysis,

2640. Stetzenbach,L.D., Buttner, M. P. and Cruz, P., (2004), , Detection and enumeration of airborne biocontaminants
      fungi: assessment, sampling and analysis,

2641. Steven Winter Assoc. Inc, (1999), , Exterior walls
      sheathing,

2642. Steven Winter Associates, (2006), , Panelized Wall Systems: Making the Connections

2643. Steven Winter Associates, (2001), , A Community Guide to Factory-Built Housing

2644. Stevens, P., (2010), , The 'Shale Gas Revolution': Hype and Reality

2645. Stewart, J. and Graham, P., (1996), , Current worldwide embodied energy research
      embodied energy,

2646. Stewart, R.B., Jacobsen, R.T. and Becker, J. H., (1996), , Formulations for thermodynamic properties of moist air at low pressures as used for construction of new ASHRAE SI unit psychrometric charts
      material properties: hygrothermal,

2647. Stewart, S. L., Grinshpun, S. A., Willeke, K., Terzieva, S., Ulevicius, V. and Donnelly, J., (1995), , Effect of impact stress on microbial recovery on an agar surface
      fungi: mycology studies, culturing,

2648. Stewart, W. E., (1998), , Effect of air pressure differential on vapor flow through sample building walls
      ventilation: airtightness, air leakage,,

2649. St-Hilaire, A., Derome, D. and Fazio, P., (2003), , Approach for the simulation of wetting due to rain infiltration for building envelope testing
      experiment: hygrothermal performance, experiment: laboratory, rain penetration, water intrusion,

2650. Stockenstrom, H., (2002), , The Mould (Litigation) Epidemic, Third Party Mould Claims in Canada
      fungi: legal, law, litigation, insurance issues,

2651. Stotler, R. L., Frape, S. K., Ruskeeniemi, T., Ahonen, L., Onstott, T. C. and Hobbs, M. Y., (2009), , Hydrogeochemistry of groundwaters in and below the base of thick permafrost at Lupin

2652. Stout, D. and Mason, M. A., (2002), , The distribution of Chlorpyrifos following a crack and crevice type application in the U.S. EPA indoor air quality research house
      IAQ - indoor air quality,

2653. Strachan, P. A., (2008), , Simulation support for performance assessment of building components
      experiment: field testing and monitoring programs, simulation: heat transfer, thermal,

2654. Straube, J., (2001), , The influence of low-permeance vapor barriers on roof and wall performance
      roof, vapor barrier, vapor retarder,

2655. Straube, J., (2002), , Moisture in buildings
      moisture in buildings,

2656. Straube, J., (2001), , Pressure moderation and rain penetration control
      rainscreen, pressure equalized rainscreen principle, simulation: wind-driven rain,

2657. Straube, J. and Burnett, E.F.P, (1999), , A review of rain control and design strategies
      rain, rain penetration, water intrusion, surveys, reviews, statistics,

2658. Straube, J. and Schumacher, C., (2003), , The role of hygrothermal modeling in practical building design: case studies
      HAM hygrothermal simulation, HAM: application,

2659. Straube, J. F. and Burnett, E. F. P., (1995), , Vents, ventilation drying, and pressure moderation
      cavity wall, drying potential of building envelope, ventilation: airtightness, air leakage,,

2660. Straube, J. F. and Burnett, E. F. P., (1998), , Drainage, ventilation drying and enclosure performance
      cladding, siding, veneer, drying potential of building envelope, rain, solar driven diffusion, vapor barrier, vapor retarder,

2661. Straube, J. F. and Burnett, E.F.P, (1997), , Driving rain and building facades
      rain,

2662. Straube, J., Onysko, D. and Schumacher, C., (2002), , Methodology and design of field experiments for monitoring the hygrothermal performance of wood frame enclosures
      experiment: field testing and monitoring programs, wood frame houses and walls, wood structure,

2663. Straube, J.F, (1999), , Moisture fundamentals and mould
      fungi: molds in buildings, moisture in buildings,

2664. Straube, J.F. and Burnett, E.F.P, (1997), , Rain control and screened wall systems
      rain, rainscreen, pressure equalized rainscreen principle,

2665. Straube, J.F. and Burnett, E.F.P, (2001), , Overview of hygrothermal (HAM) analysis methods
      HAM hygrothermal simulation, HAM: computer models, surveys, reviews, statistics,

2666. Straube, J.F. and Burnett, E.F.P, (2000), , Simplified prediction of driving rain deposition
      wind driven rain,

2667. Straube, J.F. and V. Acahrya, (0), , Indoor air quality, healthy buildings, and breathing walls
      envelope design, IAQ - indoor air quality,

2668. Straube, J.F., and Burnett, E.F.P, (1995), , Moisture movement in building enclosure wall systems
      moisture in buildings,

2669. Straube, J.F., and Burnett, E.F.P., (1997), , Field testing of filled-cavity wall systems
      cavity wall,

2670. Straube,J.F, (1995), , Moisture control in enclosure wall systems
      envelope design, moisture control, moisture management, moisture damages and problems for buildings,

2671. Stuart, M. D. and Moura-costa, P., (1998), , Climate Change Mitigation by Forestry: a review of international initiatives
      climate change, global warming, sustainability, environment, wood, lumber, timber,

2672. Sudakin, D. L., (2000), , Stachybotrys chartarum: Current Knowledge of Its Role in Disease
      fungi: exposure investigation, fungi: health effects, fungi: Stachybotrys,

2673. Sudakin, D.L, (1998), , Toxigenic fungi in a water-damaged building: An intervention study
      fungi: damage to buildings,

2674. Suffian, A., (2013), , Some common maintenance problems and building defects: our experiences
      building: damage and failures, maintenance, inspection, and diagnose,

2675. Sullivan, R. F., (2008), , Some Worst Case Practices in Data Centers

2676. Suman, B. M., K. N. Agarwal, et al., (2000), , Moisture influence in building for thermal comfort in hot humid region
      energy and moisture in building, thermal comfort, weather, climates,

2677. Sumathipala, K., (2006), , Flammability tests for regulation of building and construction materials
      building, fire, smoke,

2678. Summerbell, R. C., (2001), , Protocols For Investigation Of Indoor Fungal Amplifiers
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2679. Summerbell, R. C., (2002), , Sampling methodology for fungal bioaerosols and amplifiers in cases of suspected indoor mold proliferation
      fungi: assessment, sampling and analysis,

2680. Sun Ridge Group, (2002), , Alternative wall systems for low-rise housing
      envelope design,

2681. Sun, C., Giles, H. and Lian, Z., (2014), , The dynamic impact of window characteristics on shading factor and energy consumption

2682. Sun, H., Keener, H. M., Deng, W., Michel, F. C. and Jr., , (2004), , Development and Validation of 3-D CFD Models to Simulate Airflow and Ammonia Distribution in a High-Rise? Hog Building during Summer and Winter Conditions
      Indoor air movement-CFD,

2683. Sun, L. L. and Yang, H. X., (2010), , Impacts of the shading-type building-integrated photovoltaic claddings on electricity generation and cooling load component through shaded windows
      BIPV, PV PV Photovoltaic,

2684. Sunesson, A. L., Vaes, W. H. J., Nilsson, C. A., Blomquist, G., Andersson, B. and Carlson, R., (1995), , Identification of volatile metabolites from five fungal species cultivated on two media
      fungi: MVOC - microbial volatile organic compound,

2685. Sunesson, A., Nilsson, C., Andersson, B. and Blomquist, G., (1996), , Volatile metabolites produced by two fungal species cultivated on building materials
      fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound,

2686. Sunessona, A., Nilssona, C. and Anderssona, B., (1995), , Evaluation of adsorbents for sampling and quantitative analysis of microbial volatiles using thermal desorption-gas chromatography
      fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound, measurement and instrumentation,

2687. Suonketo, J. and Pessi, A., (2000), , The air flows and microbial contamination to indoor air from sandwich facade -- case study
      fungi: aerobiology, dispersion of spores,,

2688. Supelco, (1999), , Solid phase microextraction application guide and additional SPME literature,
      measurement: SPME,

2689. Surry, D., Skerlj, P.F. and Mikitiuk, M.J, (1995), , An exploratory study of the climatic relationships between rain and wind
      rain, wind driven rain,

2690. Svennberg K, (2006), , Moisture buffering in the indoor environment
      Moisture buffering,

2691. Svennberg, K., (2003), , Determination of moisture properties for materials exposed to the indoor air
      measurement: moisture content,

2692. Svennberg, K., Lengsfeld, K., Harderup, L., Holm, A., (2007), , Previous Experimental Studies and Field Measurements on Moisture Buffering by Indoor Surface Materials

2693. Swaffield, J. A. and Jack, L. B., (2005), , Simulation and analysis of airborne cross-contamination routes due to the operation of building drainage and vent systems
      building subsystems: mechanical,

2694. Swan, L. G. and Ugursal, V. I., (2009), , Modeling of end-use energy consumption in the residential sector: A review of modeling techniques
      energy,

2695. Swenson, L., Globaltox, P., Robbins, C., Geer, W. and Globaltox, R., (2001), , What's growing in the Pacific Northwest?
      fungi: molds in buildings,

2696. Swenson, L., Robbins, C. and Geer, W., (2002), , Variability in viable and non-viable mold spore sampling results
      fungi: assessment, sampling and analysis, fungi: mycology studies, culturing, fungi: spore, aerosol,

2697. Swinton, M. C., Bomberg, M. T., Kumaran, M. K., Maref, W., Normandin, N. and Marchand, R. G., (2000), , In-Situ performance evaluation of exterior insulation basement systems (EIBS) - spray polyurethane foam: summary report
      experiment: field testing and monitoring programs, insulation, thermal analysis and performance,

2698. Syed, A.M., Kosny, J., (2006), , Effect of framing factor on clear wall r-value for wood and steel framed walls
      thermal analysis and performance,

2699. Szponar, B. and Larsson, L., (2000), , Determination of microbial colonisation in water-damaged buildings using chemical marker analysis by gas chromatography-mass spectrometry
      fungi: assessment, sampling and analysis, measurement and instrumentation, measurement: GC-MS,

2700. Tabares-velasco, P. C., Christensen, C. and Bianchi, M., (2012), , Verification and validation of EnergyPlus phase change material model for opaque wall assemblies

2701. Tadeu, A., Sim?es, N. and Branco, F., (2003), , Steady-state moisture diffusion in curved walls, in the absence of condensate flow, via the BEM: a practical Civil Engineering approach (Glaser method)
      moisture source for building envelope,

2702. Taleb, H. M. and Pitts, A. C., (2009), , The potential to exploit use of building-integrated photovoltaics in countries of the Gulf Cooperation Council
      BIPV, PV PV Photovoltaic,

2703. Talley, S. M., Coley, P. D. and Kursar, T. A., (2002), , The effects of weather on fungal abundance and richness among 25 communities in the Intermountain West
      fungi: molds in buildings,

2704. Talukdar, P., Olutmayin, S. O., Osanyintola, O. F. and Simonson, C. J., (2007), , An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data
      experiment: laboratory, Whole building HAM,

2705. Tam, V. W. Y., Tam, C. M., Zengc, S. X. and Ng, W., (2007), , Towards adoption of prefabrication in construction, Towards adoption of prefabrication in construction

2706. Tan, X., (2008), , Automatic code compliance checking in designing building envelopes

2707. Tang, H., Xue, S. and Fan, C., (2008), , Differential evolution strategy for structural system identification

2708. Tang, R. and Etzion, Y., (2004), , Comparative studies on the water evaporation rate from a wetted surface and that from a free water surface
      condensation and evaporation,

2709. Tariku, F., Kumaran, K. and Fazio, P., (2010), , Integrated analysis of whole building heat, air and moisture transfer

2710. Tariku, F., Kumaran, K. and Fazio, P., (2010), , Transient model for coupled heat, air and moisture transfer through multilayered porous media

2711. Tariq, S. and Osama, M., (2001), , A decision support system for rehabilitation of sewer pipes
      construction management,

2712. Taylor, B. J. and Imbabi, M. S., (1998), , The application of dynamic insulation in buildings
      envelope design, insulation,

2713. Taylor, B. J. and Imbabi, M. S., (1999), , Dynamic insulation in multistorey buildings
      insulation,

2714. Taylor, B. J., Webster, R. and Imbabi, M. S., (1999), , The building envelope as an air filter
      IAQ: particulate, dust,, insulation, particle transport, penetration of particulate, through walls,

2715. Taylor, G., (1954), , The dispersion of matter in turbulent flow through a pipe
      CFD - computational fluid dynamics,

2716. Taylor, N. and Kuyatt, C. E., (1994), , Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
      mathematics: error analysis, uncertainty analysis,

2717. Teasdale St-Hilaire, A, (2006), , Hygrothermal performance of different wood-frame wall assemblies wetted by simulated rain infiltration

2718. Teasdale-st-hilaire, A. and Derome, D.,, (2006), , Methodology and Application of Simulated Wind-Driven Rain Infiltration in Building Envelope Experimental Testing

2719. Teasdale-st-hilaire, A., Derome, D. and Fazio, P., (0), , Behavior of wall assemblies with different wood sheathings wetted by simulated rain penetration
      experiment: laboratory, sheathing,

2720. Tenhunen, O., K. Lintula, T. Lehtinen, J. Lehtovaara, M. Viljanen, J. Kesti, P. M?kel?inen, (0), , Double skin facades - structures and building physics
      double facades, Education, training,

2721. TenWolde, A., (1994), , Ventilation, humidity, and condensation in manufactured houses during winter
      condensation and evaporation, prefabricate buildings, manufactured housing, ventilation - Air Infiltration and Ventilation in Buildings,

2722. TenWolde, A., (1999), , Moisture management in buildings
      Resources: research programs on moisture in building envelope,

2723. TenWolde, A., (1989), , Moisture transfer through materials and systems in buildings
      HAM: material properties,

2724. Tenwolde, A., (1987), , A mathematical model for indoor humidity in homes during winter
      interior moisture load,

2725. Tenwolde, A. and Colliver, D.G., (2001), , Weather Data
      weather data and issues,

2726. TenWolde, A. and Rose, W. B., (1999), , Issues related to venting of attics and cathedral ceilings
      drying potential of building envelope, roof,

2727. TenWolde, A. and Walker, I. S., (2001), , Interior moisture design loads for residences
      interior moisture load, moisture in buildings, Whole building HAM: models,

2728. TenWolde, A., and C. G. Carll, (1992), , Effect of cavity ventilation on moisture in walls and roofs
      cavity wall, drying potential of building envelope,

2729. TenWolde, A., Carll, C. G., and Malinauskas, V., (1998), , Air pressures in wood frame walls
      air barrier, rainscreen, pressure equalized rainscreen principle, vapor barrier, vapor retarder, wind driven rain, wind induced pressure on building, wood frame houses and walls, wood structure,

2730. Teodosiu, C., Hohota, R., Rusaou?n, G. and Woloszyn , M., (2003), , Numerical prediction of indoor air humidity and its effect on indoor environment
      IAQ: CFD, Indoor air movement-CFD,

2731. Tervola, P., (1989), , A method to determine the thermal conductivity from measured temperature profiles

2732. Tesar, J., Prazak, D. and Krajicek, Z., (2001), , The New CMI (Czech Metrology Institute) Method of Metrological Ensure for Accurate Low Mass Flow
      measurement and instrumentation,

2733. Teshome, E. J. and Haghighat, F., (2004), , Zonal Models for Indoor Air Flow - A Critical Review
      ventilation: air flow models, multi zone model,

2734. Thalfeldt, M., Pikas, E., Kurnitski, J. and Voll, H., (2013), , Facade design principles for nearly zero energy buildings in a cold climate

2735. Tham, K. W., Lee, H.S. and Gero, J.S, (1990), , Building envelope design using design prototypes
      envelope design,

2736. Thatcher, T. L., Lunden, M. M., Revzan, K. L., Sextro, R. G. and Brown, N. J., (2003), , A concentration rebound method for measuring particle penetration and deposition in the indoor environment
      IAQ: particulate, dust,, ventilation: airtightness, air leakage,,

2737. Thatchera, T. L. and Laytonb, D. W., (1995), , Deposition, resuspension, and penetration of particles within a residence
      fungi: aerobiology, dispersion of spores,,

2738. The Finn Group , (2004), , The Use of Infrared Thermal Imaging in Indoor Environmental Quality Investigations
      Infrared thermography (IRT),

2739. The Norwegian State Housing Bank, (2004), , Housing statistics
      housing market,

2740. The Vancouver Sun, (2004), , Study finds household moulds' contribution to illness uncertain
      fungi: damp house -- health,

2741. Th¨¦berge, P., (1987), , Fast Tracking of Construction Projects: Analysis and Assessment
      Fazio's student: thesis,

2742. Thekaekara, M. P., (1976), , Solar radiation measurement: Techniques and instrumentation

2743. Thiagarajan, S., Fallah, P., Burge, H. and Gallup, J., (2005), , Distribution of various fungi reported on different indoor substrates
      fungi and molds in buildings and their envelopes,

2744. Thirugnanasambandam, M., Iniyan, S. and Goic, R., (2010), , A review of solar thermal technologies
      solar: utilization of solar energy,

2745. Thomas, L. and Juanes, F., (1996), , The importance of statistical power analysis: an example from aAnimal bBehaviour
      mathematics: statistics,

2746. Thom¨¦e, V., (2001), , From finite differences to finite elements: A short history of numerical analysis of partial differential equations
      mathematics,

2747. Thormark, C., (2006), , The effect of material choice on the total energy need and recycling potential of a building
      energy,

2748. Thornburg, J., Ensor, D. S., Rodes, C. E., Lawless, P. A., Sparks, L. E. and Mosley, R. B., (2001), , Penetration of particles into buildings and associated physical factors. part I: model development and computer simulations
      particle transport, penetration of particulate, through walls,

2749. Thorsell T. and Bomberg M. , (2008), , Integrated methodology for evaluation of energy performance of the building enclosures: part II - examples of application to res

2750. Thorsell, T. and Bomberg, M., (2011), , Integrated methodology for evaluation of energy performance of the building enclosures: part 3 ˇŞ uncertainty in thermal measurem

2751. Thrum, T. C., Dets, D., Hewett, S., Rudic, A., Stuart, I. and Viel, G. C., (2004), , Development of a powerful vortex stabilized waterwall flash lamp for RTP applications

2752. Thrum, T. C., Parleniuk, D. and Slootweg, D., (2000), , Characterizing state-of-the-art solar panels - a new approach for large area testing

2753. Thuriaux, B., (2001), , Contribution of basic research to the Irish national innovation system
      research, funding,

2754. TIA, (1992), , Crystall Ball for Windows, users manual
      mathematics: Monte Carlo simulation method, standards for windows,

2755. Tian, Y. and Zhao, C. Y., (2013), , A review of solar collectors and thermal energy storage in solar thermal applications

2756. Tiilikainen, A. S., Heikkinen, I., Venp??, K., Karttunen, R., (2001), , Pilot analysis of the immune response to fungal antigens in subjects working in humidity damaged houses
      fungi: health effects,

2757. Tilkes, F., Dott, W., Fischer, G., Grun, L., Harpel, S., Keller, R., Martens, W., Palmgren, U. and Seidel, H. J., (1999), , Microbial air pollutants - methods for the detection and identification of endotoxins, mycotoxins and MVOC
      fungi: components and products, fungi: MVOC - microbial volatile organic compound,

2758. Time, B., (1998), , Hygroscopic moisture transport in wood
      fungi: legal, law, litigation, insurance issues, HAM: theory and modelling, wood, lumber, timber,

2759. Time, B. and Uvsl?kk, S., (2002), , Intercomparison on measurement of water vapour permeance
      measurement: vapor diffusion properties, WVT,

2760. Ting, R., (2006), , Functional Isolation Concept in Curtain Wall Design
      curtain wall,

2761. Ting, R., (1997), , Evolution of curtain wall design against water infiltration
      curtain wall, rain penetration, water intrusion,

2762. Toas, M., (1996), , Results of the 1985 Round-Robin Test Series Using ASTM E 96-80
      HAM: material properties, standards, standards discussion,

2763. Tobiasson, W. N., Greatorex, A. R., Fabian, B. A., (1998), , Moisture in the roofs of cold storage buildings
      fungi: legal, law, litigation, insurance issues, moisture damages and problems for buildings, roof,

2764. Tobin, R.S., E. Bavoneuslei, A. Gilman, T. Kuiper-Goodman, J.D. Miller, and M. Giddings, Reinikainen, L. M. and Jaakkola, J. J. K., (1987), , Significance of fungi in indoor air: report from a working group
      fungi and molds in buildings and their envelopes, fungi: MVOC - microbial volatile organic compound,

2765. Todd, J.A., Drury Crawley, Susanne Geissler, Gail Lindsey, (2001), , Comparative assessment of environmental performance tools and the role of the Green Building Challenge
      sustainability, environment,

2766. Toftum, J., (2004), , Air movement -- good or bad?
      Indoor air movement,

2767. Toivola, M., Alm, S., Reponen, T., Kolari, S. and Nevalainen, A., (2002), , Personal exposures and microenvironmental concentrations of particles and bioaerosols
      fungi: assessment, sampling and analysis, fungi: spore, aerosol,

2768. Tommerup, H., Svendsen, S., (2006), , Energy savings in Danish residential building stock
      energy,

2769. Tonuia, K. and Tripanagnostopoulos, Y., (2008), , Performance improvement of PV/T solar collectors with natural air flow operation
      BIPV, PV/T,

2770. Toole, T. M., (1998), , Uncertainty and home builders' adoption of technological innovations
      technology transfer,

2771. Torcellini, P., Pless, S. and Deru, M., Crawley, D., (2006), , Zero Energy Buildings: A Critical Look at the Definition

2772. Tracy, J. M., (2000), , SIPs overcoming the elements
      SIP: structural insulated panels,

2773. Tranthim-fryer, D. J., Hansson, R. C. and Norman, K. W., (2001), , Headspace/solid-phase microextraction/gas chromatography-mass spectrometry: a screening technique for the recovery and identification of volatile organic compounds (VOC's) in postmortem blood and viscera samples
      fungi: MVOC - microbial volatile organic compound, measurement: SPME, VOC: measurement and identification,

2774. Trechsel, H. R., (1994), , Manual on moisture control in buildings
      moisture control, moisture management, moisture in buildings,

2775. Trechsel, H. R. and Bomberg, M. (Eds), (1996), , Water vapor transmission through building materials and system: mechanisms and measurement
      measurement: Infrared, measurement: vapor diffusion properties, WVT, standards: ASTM,

2776. Trechsel, H.R, (2001), , Moisture analysis and condensation control in building envelopes
      HAM: computer models, HAM: theory and modelling,

2777. Treloar, G. J., (1996), , A complete model of embodied energy ˇ®pathways' for residential buildings
      building: residential, house, home, embodied energy,

2778. Treloar, G. J., Love, P. E. D. and Holt, G. D., (1998), , Using national input-output data for embodied energy analysis of individual residential buildings
      embodied energy,

2779. Treloar, G., Fay, R., Ilozor, B. and Love, P., (2001), , Building materials selection: greenhouse strategies for built facilities
      green building, sustainable building, material,

2780. Trogisch, A., Franzke, U., (2000), , "Humid Air" and cooled walls
      envelope design,

2781. Trombe, A. and Moreau, J. A., (1995), , Surface temperature measurement of semi-transparent material by thermocouple in real site experimental approach and simulation

2782. Trueman, C., (2001), , Building systems: energy standards
      energy efficiency, Standards: ASHRAE,

2783. Trunov, M., Trakumas, S., Willeke, K., Grinshpun, S. A. and Reponen, T., (2001), , Collection of bioaerosol particles by impaction: effect of fungal spore agglomeration and bounce
      fungi: assessment, sampling and analysis, fungi: spore, aerosol, measurement and instrumentation, measurement and instrumentation,

2784. Trusty, W. B. and Meil, J. K., (2002), , Building life cycle assessment: residential case study
      life cycle assessment (LCA),

2785. Trusty, W. B., Meil, J. K., (2000), , Buildings as products: issues and challenges for LCA
      life cycle assessment (LCA),

2786. Tsai, F. C., Macher, J. M. and Hung , Y., (2007), , Biodiversity and concentrations of airborne fungi in large US office buildings from the BASE study

2787. Tsai, S. M., Yang, C. S., Moffett, P., Puccetti, A., (2001), , Comparative studies of collection efficiency of airborne fungal matter using Andersen single-stage sampler and Air-O-Cell cassettes
      fungi: assessment, sampling and analysis,

2788. Tsai, S.M. et al, (2001), , Measurements of airborne fungal and endotoxin levels in water-damaged buildings
      fungi: damage to buildings, fungi: molds in buildings,

2789. Tsai, W., Chen, H. and Liao, T., (2005), , An ultrasonic air temperature measurement system with self-correction function for humidity
      measurement: anemometer, low air velocity in room,

2790. Tsongas, G., (1992), , A field study of indoor moisture problems and damage in new northwest homes
      experiment: field testing and monitoring programs, moisture damages and problems for buildings,

2791. Tsongas, G., (1994), , Case Studies of Moisture Problems in Residences
      moisture damages and problems for buildings,

2792. Tsongas, G. A., Govan, D. P. and J. A. McGillis, (1998), , Field observations and laboratory tests of water migration in walls with shiplap hardboard siding
      biodeterioration, cladding, siding, veneer, experiment: field testing and monitoring programs, OSB - Oriented strandboard, rain penetration, water intrusion, wood panel,

2793. Tsongas, G. and Olson, J., (1995), , Tri State homes: a case study of extensive decay in the walls of older manufactured homes with exterior vapor retarder
      fungi and molds in buildings and their envelopes, prefabricate buildings, manufactured housing, vapor barrier, vapor retarder,

2794. Tsongas, G., Burch, D., Roos, C., and Cunningham, M. J., (1995), , A prarmeteric study of wall moisture contents using a revised variable indoor relative humidity version of the "MOIST" transient heat and moisture transfer model
      HAM: theory and modelling, measurement and instrumentation, moisture in buildings, Whole building HAM: theory and modeling,

2795. Tsongas, G.A., Thornton, B.A., Burch, D.M. and Walton, G.N, (1996), , A computer analysis of the moisture performance of roof constructins in the U.S. DOE Moisture Control Handbook
      HAM: computer models, roof,

2796. Tsubouchi, K. K., (1990), , Water vapor pressure in the still air layer adhering to perforated plastic plates
      material properties: hygrothermal,

2797. Tuckera, E. J. B., Brucea, A. and Stainesb, H. J., (1997), , Application of modified international wood preservative chemical testing standards for assessment of biocontrol treatments
      fungi: preservatives against fungi growth and mold decay, wood, lumber, timber,

2798. Tung, T. C. W., Chao, C. Y. H. and Burnett, J., (1999), , A methodology to investigate the particulate penetration coefficient through building shell
      particle transport, penetration of particulate, through walls,

2799. Tuomi, T., Reijula, K., Johnsson, T., Hemminki, K., Hintikka, E.L., Lindroos, O., Kalso, S., Koukila-Kahkola, P., (2000), , Mycotoxins in crude building materials from water-damaged buildings
      fungi: components and products, fungi: damage to buildings, fungi: health effects, fungi: mycology studies, culturing, moisture damages and problems for buildings,

2800. Tuomisto, J. T., (1999), , TCDD: a Challenge to Mechanistic Toxicology
      fungi: components and products,

2801. Turaga, M., (1989), , Experimental Performance Evaluation of Multi-Row, Plate Finned-Tube, Direct Expansion Air Cooling and Dehumidifying Coils
      Fazio's student: thesis,

2802. T¨ąrler, D., Griffith, B.T., Arasteh, D.K., (1997), , Laboratory procedures for using infrared thermography to validate heat transfer models

2803. Turpin, B. J., Saxenab, P. and Andrews, E., (2000), , Measuring and simulating particulate organics in the atmosphere: problems and prospects
      IAQ: particulate, dust,,

2804. Turrent, D., (1981), , A review of solar houses in Europe
      solar: utilization of solar energy,

2805. Tyagi, V. V., Rahim, N. A. A., Rahim, N. A. and Selvaraj, J. A., (2013), , Progress in solar PV technology: Research and achievement

2806. Tyagi, V.V. and Buddhi, D., (2007), , PCM thermal storage in buildings: A state of art
      material,

2807. Tzempelikos, A., Athienitis, A. K. and Karava, P., (2007), , Simulation of fa?ade and envelope design options for a new institutional building

2808. U. S. Department of Labor, (2003), , A Brief Guide to Mould in the Workplace
      fungi and molds in buildings and their envelopes,

2809. U.S Environmental Protection Agency, (2001), , Healthy buildings, healthy people: a vision for the 21st century
      building,

2810. UDI, (2000), , Submission to the Second Commission of Inquiry into the Quality of Condominium Construction
      BC leaky condos, building: condo / condominium, building: damage and failures, envelope damage, moisture damages and problems for buildings,

2811. UK Green Building Council, (2008), , Definition of Zero-Carbon Report
      Zero Energy Building: ZEB,

2812. UKCIP/EPSRC, (2001), , Workshop report: Climate change and the built environment research
      built environment, climate change, global warming,

2813. Underwood, S.J. and Meentemeyer, V., (1998), , Physical geography, climatology of wind-driven rain for the contiguous United States for the period 1971 to 1995
      wind driven rain,

2814. UNEP, (2002), , Status of ratification/accession/acceptance/approval of the agreements on the protection of the stratospheric ozone layer
      Ozone depletion,

2815. UNEP, (2000), , The Montreal Protocol on Substances that Deplete the Ozone Layer as adjusted and/or amended in in London 1990, Copenhagen 1992, Vienna 1995, Montreal 1997, Beijing 1999
      Ozone depletion,

2816. UNEP, (2007), , Buildings and climate change: status, challenges and opportunities

2817. UNEP, UNICEF & WHO, (2002), , Children in the new millennium: environmental impact on health
      market, trend, future,

2818. UNEP/GRID-Arenda, (2002), , Vital climate graphics
      climate change, global warming, greenhouse gas emissions, surveys, reviews, statistics,

2819. UNFCCC, (2001), , Report of the global environment facility to the conference, note by the secretariat
      built environment, climate change, global warming, greenhouse gas emissions,

2820. UNITEC Institute of Technology, (2000), , Auckland house cladding survey
      cladding, siding, veneer,

2821. ¨ąnver, R., Akda, N. Y., Gedik, G. Z., ?zt¨ąrk, L. D. and Karabiber, Z., (2004), , Prediction of building envelope performance in the design stage: an application for office buildings
      envelope design,

2822. Urban Arts Architecture, (2008), , Expanding market demand for Canadian wood products-a strategic initiative for the Canadian Wood Council

2823. Urbanetz, J., Zomer, C. D. and R¨ąther, R., (2011), , Compromises between form and function in grid-connected, building-integrated photovoltaics (BIPV) at low-latitude sites,
      BIPV,

2824. US Department of Energy, (2010), , Annual Energy Review 2009
      energy,

2825. USAF, (0), , AF Passive Solar Handbook, Volume I: Introduction to Passive Solar Concepts

2826. Usher, E., Jean, G. and Howell, G., (1994), , The use of photovoltaics in a northern climate
      Housing research for the North, PV PV Photovoltaic,

2827. Vafai, K. and Tien, H. C., (1989), , A numerical investigation of phase change effects in porous materials
      material properties: hygrothermal,

2828. Valen, M.S., (1998), , Moisture transfer in organic coatings on porous materials--the influence of varying environmental conditions
      HAM: theory and modelling,

2829. Van Loo, J. Robbins, C. Swenson, L. and Kelman, B., (2004), , Growth of mold on fiberglass insulation materials--a review of the literature
      fungi: growth and growth model, insulation,

2830. van Mook, F., (2002), , Driving rain on building envelopes
      wind driven rain,

2831. van Mook, F., (1999), , Measurements and simulations of driving rain on the main building of the TUE
      simulation: wind-driven rain, wind driven rain, wind induced pressure on building, wind-driven rain: CFD models,

2832. van Mook, F., (1999), , Full-scale measurements and numeric simulation of driving rain on a building fasade
      wind driven rain, wind-driven rain: CFD models,

2833. van Paassen, A. H. C. and Jong, A. G., (1979), , The synthetical reference outdoor climate
      weather data and issues,

2834. van Schijndel, A. W. M., (2003), , Modeling and solving building physics problems with FemLab
      CFD - computational fluid dynamics, mathematics: numerical method, finite difference, finite element, simulation of building process,

2835. van Schijndel, A. W. M., (2002), , Solving building physics problems based on PDEs with FEMLAB
      CFD - computational fluid dynamics,

2836. van Straaten, R.V., (2003), , Measurement of ventilation and drying of vinyl siding and brick clad wall assemblies
      cladding, siding, veneer,

2837. van_Decker, G. W. E. V., Hollands, K. G. T. and Brunger, A. P., (2001), , Heat-exchange relations for unglazed transpired solar collectors with circular holes on a square or triangular pitch,

2838. van_Sark, W., Barnham, K., Slooff, K. W. J., Chatten, L. H., B¨ąchtemann, A. J., Meyer, A., Mccormack, A. and Ko, S. J., (2008), , Luminescent solar concentrators - A review of recent results

2839. van_Schijndel, A. W. M., (2004), , Application of HAMLab for Whole building HAM response modeling
      HAM: computer models,

2840. van_Schijndel, A.W.M., (2007), , Integrated heat air and moisture modeling and simulation
      HAM hygrothermal simulation,

2841. van_Schijndel, A.W.M., (2009), , The effect of micro air movement on the heat and moisture characteristics of building constructions.
      HAM hygrothermal simulation,

2842. van_Schijndel, J., (2008), , Guidelines for heat and moisture modelling in constructions using multiphysics FEM software
      HAM hygrothermal simulation,

2843. van_Wonderen, S., (1995), , Experimental Determination of Fenestration Solar Heat Gain Coefficient

2844. Vanam B. C. L. , Rajyalakshmi M. and Inala R. , (2012), , Static analysis of an isotropic rectangular plate using finite element analysis (FEA)

2845. Van-Buggenhout, S., van-Brecht, A., Ozcan, S. E., Vranken, E., van-Malcot, W. and Berckmans, D., (2009), , Influence of sampling positions on accuracy of tracer gas measurements in ventilated spaces
      tracer gas method for measuring air exchange,

2846. Vandersteen, K., Roels, S., Carmeliet, J. and Feyen, J., (2002), , Modeling fluid flow in fractured media using continuum, network and discrete aproaches
      HAM: theory and modelling,

2847. Vanier, D. J., Kyle, B. R., Kosovac, B., Froese, T. M. and Lounis, Z., (2001), , The Belcam Project: a summary of three years of research in service life prediction and information technology
      service life prediction,

2848. Vats, K. and Tiwari, G. N., (2012), , Performance evaluation of a building integrated semitransparent photovoltaic thermal system for roof and façade

2849. Veiseh, S., Hakkaki-fard,, Kowsary, , (2009), , Determination of the air/fiber conductivity of mineral wool insulations in building applications using nonlinear estimation meth

2850. Venkatarama-Reddy, B. V. and K. S. Jagadish and Jagadish, K. S., (2002), , Embodied energy of common and alternative building materials and technologies
      embodied energy, material, technology,

2851. Vera, S., Fazio, P. and Rao, J., (2010), , Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test hut: Part 1 - Experimental study
      experiment: laboratory, ventilation: air flow models, multi zone model,

2852. Vera, S., Fazio, P. and Rao, J., (2009), , Interzonal air and moisture transport through large horizontal openings in a full-scale two-story test-hut: Part 2- CFD study
      CFD - computational fluid dynamics, Indoor air movement-CFD,

2853. Verbunt, P. P. C. and Debije, M. G., (2011), , Progress in Luminescent Solar Concentrator Research: Solar Energy for the Built Environment

2854. Vereecken, E. and Roels, S., (2012), , Review of mould prediction models and their influence on mould risk evaluation

2855. Vereecken, E., Roels, S. and Janssen, H., (2010), , In situ determination of the moisture buffer potential of room enclosures
      Moisture buffering,

2856. Verhoeff, A. P. and Burge, H. A., (1997), , Health risk assessment of fungi in home environments
      fungi: damp house -- health, fungi: exposure investigation, fungi: health effects, fungi: indoor biocontamination -- health symptom,

2857. Vette, A. F., Rea, A. W., Lawless, P. A., Rodes, C. E., Evans, G., Highsmith, V. R. and Sheldon, L., (2001), , Characterization of indoor-outdoor aerosol concentration relationships during the Fresno PM exposure studies
      IAQ: particulate, dust,, particle transport, penetration of particulate, through walls,

2858. Vice, S.J, (2000), , Indicators of mold growth in indoor environments
      fungi and molds in buildings and their envelopes, fungi: aerobiology, dispersion of spores,, fungi: assessment, sampling and analysis, fungi: components and products, fungi: MVOC - microbial volatile organic compound,

2859. Vigotti, R., (1998), , International energy agency photovoltaic power systems implementing agreement

2860. Viitanen, H., (1997), , Factors affecting the development of mould and decay in wooden material and wooden structures
      fungi: growth and growth model,

2861. Viitanen, H., (2001), , Factors affecting mould growth on kiln dried wood
      fungi: growth and growth model, wood, lumber, timber,

2862. Viitanen, H. and Bjurman, J., (1995), , Mould growth on wood at fluctuating humidity conditions, energy efficiency and energy conservation: policies, programmes and their effectiveness
      fungi: guideline,

2863. Viitanen, H., Hanhijarvi, A., Hukka, A., Koskela, K., (2000), , Modeling mould growth and decay damages
      fungi: growth and growth model,

2864. Viitanen, H., Toratti, T., Makkonen, L., Peuhkuri, R., Ojanen, T., Ruokolainen, L. and R?is?nen, J., (2010), , Towards modelling of decay risk of wooden materials

2865. Viitanen, H., Vinha, J., Salminen, K., Ojanen, T., Peuhkuri, R., Paajanen, L. and L?hdesm?ki, , (2010), , Moisture and bio-deterioration risk of building materials and structuresL?hdesm?ki

2866. Vinha, J., (2000), , Drying of timber-framed wall structures
      experiment: hygrothermal performance, testing facility,

2867. Vinha, J. and Kakela, P., (2000), , Water vapour transmission in wall structures due to diffusion and convection
      air barrier, experiment: hygrothermal performance, HAM: experimental work,

2868. Vinha, J. and Kalamees, T., (2003), , Principles to analyze the moisture performance of timber-framed external wall assembly due to diffusion
      envelope performance,

2869. Vinha, J., K?kel?, P. and Lindberg, R., (2002), , Moisture transport in timber-framed external wall structures in Nordic climate - laboratory tests
      experiment: hygrothermal performance, wood frame houses and walls, wood structure,

2870. Vinha, J.O., P. K?kel? and R. Lindberg, (2001), , Moisture behavior of timber-framed external wall structures in Nordic climate
      country: other, experiment: laboratory, insulation, wood frame houses and walls, wood structure,

2871. Volker, E.J., Dilella, D., Terneus, K., Baldwin, C. and Volker, I., (2000), , The determination of ergosterol in environmental samples: an interdisciplinary project involving techniques of analytical and organic chemistry
      fungi: components and products,

2872. W. R. MEADOWS, INC., (2006), , Controlling Moisture Movement in Buildings
      moisture control, moisture management,

2873. Wads?, I. and Wads?, L., (1995), , A new method for determination of vapour sorption isotherms using a twin double microcalorimeter
      measurement: hygrothermal properties,

2874. Wadso, L., (1996), , Studies of the degratation of building materials by isothermal microcalorimetry
      biodeterioration, experiment: facility on moisture in building envelope, fungi: growth and growth model, maintenance, inspection, and diagnose, sustainability, environment,

2875. Wadso, L., (0), , Describing non-Fickian water-vapor sorption in wood
      measurement: hygrothermal properties,

2876. Wady, L., Bunte, A., Pehrson, C. and Larsson, L., (2003), , Use of gas chromatography-mass spectrometry/solid phase microextraction for the identification of MVOCs from moldy building materials
      fungi: MVOC - microbial volatile organic compound, measurement: GC-MS, measurement: SPME,

2877. Wahlgren, P., (2002), , Measurements and simulations of natural and forced convection in loose-fill attic insulation
      attic, crawl space, ceiling,, experiment: hygrothermal performance, HAM hygrothermal simulation, insulation,

2878. Wahlgren, P., (2007), , Overview and literature survey of natural and forced convection in attic insulation
      ventilation: infiltration of buildings, ventilation: mechanical systems (HVAC),

2879. Wakili, K. G. and Frank,, (2004), , A humidity dependent vapour retarder in non-ventilated flat roofs. in situ measurements and numerical analysis
      envelope components, vapor barrier, vapor retarder,

2880. W?linder, M., (2000), , Wetting phenomena on wood- factors influencing measurements of wood wettability
      HAM: material properties, material properties: hygrothermal, wood, lumber, timber,

2881. Walker, J. S., D. J. Wilson and M. H. Sherman, (1998), , A comparison of the power law to quadratic formulations for air infiltration calculations
      ventilation: airtightness, air leakage,, ventilation: infiltration of buildings, ventilation: pressurization, blower door test,

2882. Wallent¨¦n, P., (1998), , Heat flow in building components, experiment and analysis
      thermal analysis and performance,

2883. Wallner, G. M., Hausner, R., Hegedys, H., Schobermayr, H. and Lang, R. W., (2006), , Application demonstration and performance of a cellulose triacetate polymer film based transparent insulation wall heating system

2884. Walters, M., Milton, D., Larsson, L. and Ford, T., (1994), , Airborne environmental endotoxin: a cross-validation of sampling and analysis techniques
      fungi: assessment, sampling and analysis, insulation,

2885. Wan, G., Li, C.S. Guo, S.P. Rylander, R. adn Lin, R.H., (1999), , An airbone mold-derived product, -1,3-D-glucan, potentiates airway allergic responses
      fungi: components and products,

2886. Wang, D. and Johnson, C.D., (1989), , A comparison study of some impulse-response identification methods
      mathematics,

2887. Wang, J., (2003), , Heat and mass transfer in built structures: Numerical analyses
      HAM: theory and modelling,

2888. Wang, J. K. and Hagentoft, C., (2001), , A numerical method for calculating combined heat, air and moisture transport in building envelope components
      HAM: simplified models - simplification, HAM: theory and modelling,

2889. Wang, J. K. and Hagentoft, C.E, (1999), , An algorithm to accelerate simulations of simulataneous heat and gas transfer in gas-filled foams
      governing equations for heat and moisture transfer,

2890. Wang, J. K. and Hagentoft, C.E, (2000), , A numerically stable algorithm for simplified calculations of combined heat, air and moisture transport
      HAM: theory and modelling, HAM: theory and modelling,

2891. Wang, L. and Wong, N. H., (2009), , Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for b
      Indoor air movement-CFD,

2892. Wang, L., Gwilliama, J. and Jonesa, P., (2009), , Case study of zero energy house design in UK

2893. Wang, Q., (1994), , Wood-based boards : response to attack by mould and stain fungi
      fungi and molds in buildings and their envelopes, wood panel,

2894. Wang, Q. and Odeen, K., (1996), , Evaluation of natural decay resistance of wood recovered from demolished buildings
      fungi: molds in buildings, wood, lumber, timber,

2895. Wang, X., Koleilat, G. I., Tang, J., Liu, H., Kramer, I. J., Debnath, R., et al., (2011), , andem colloidal quantum dot solar cells employing a graded recombination layer

2896. Wang, Y., (2006), , Structural behavior and design of two custom aluminum extruded shapes in custom unitized curtain wall systems
      curtain wall,

2897. Wanga, L. and Chen, Q., (2008), , Evaluation of some assumptions used in multizone airflow network models
      CFD - computational fluid dynamics, ventilation: air flow models, multi zone model,

2898. Waqas, A. and Din, Z.U., (2013), , Phase change material (PCM) storage for free cooling of buildings' review

2899. Wardell, C., (2001), , Through the roof
      roof,

2900. Wardhana, K. and Hadipriono, F., (2003), , Study of Recent Building Failures in the United States

2901. Wargocki, L. L., Witterseh, T., Sundell, J., Wyon, D. P. and Fanger, P. O., (2002), , Subjective perceptions, symptom intensity and performance: a comparison of two independent studies, both changing similarly the pollution load in an office
      experiment: laboratory, IAQ: Health,

2902. Wargocki, P., Sundell, J., Bischof, W., Brundrett, G., Fanger, P. O., et al, (2002), , Ventilation and health in non-industrial indoor environments: report from a European Multidisciplinary Scientific Consensus Meeting (EUROVEN)
      IAQ: Health, ventilation - Air Infiltration and Ventilation in Buildings,

2903. Warscheid, T, Braams, J., (2000), , Biodeterioration of stone: a review
      Fa?ade wetting, water runoff, soiling,

2904. Washington State Energy Code, (2005), , Builder's field guide 5th edition
      construction industry,

2905. Wasiolek P. T., Whicker J. J., Gong H., Rodgers J. C. ., Industry Canada, (1999), , Room airflow studies using sonic anemometry
      measurement: anemometer, low air velocity in room,

2906. Watson, R.T. et al., (2001), , Climate change 2001: synthesis report
      climate change, global warming, green building, sustainable building, greenhouse gas emissions,

2907. Watt, D., (1999), , Building Pathology: Principles and Practice
      maintenance, inspection, and diagnose,

2908. WBCSD, (2009), , Transforming the Market: Energy Efficiency in Buildings
      energy efficiency,

2909. Webber, J.B.W., (2000), , Characterising porous media
      moisture transport in porous materials,

2910. WEC, (2007), , Survey of Energy Resources 2007

2911. Weggel, D. C., Zapata, B. J. and Kiefer, M. J., (2007), , Properties and dynamic behavior of glass curtain walls with split screw spline mullions
      curtain wall,

2912. Wegner, T. and Jones, P., (2005), , Nanotechnology for forest products. Part 1
      technology,

2913. Wegner, T. H. and Jones, P. E., (2006), , Advancing cellulose-based nanotechnology
      technology, wood, lumber, timber,

2914. Weinlader, H., Beck, A. and Fricke, J., (2005), , PCM-facade-panel for daylighting and room heating
      material,

2915. Weiss, W. and Mauthner, F., (2011), , Solar Heat Worldwide 2011

2916. Wemhoff, P., (2001), , Mold, a poltergeist
      fungi: molds in buildings, moisture damages and problems for buildings, ventilation: infiltration of buildings,

2917. Wemh?ner, C., Hafner, B. and Schwarzer, K., (2000), , Simulation of solar thermal systems with CARNOT blockset in the environment MATLAB? simulink?

2918. Wessen, B. and Schoeps, K., (1996), , Microbial volatile organic compounds-what substances can be found in sick buildings?
      fungi: MVOC - microbial volatile organic compound, IAQ: sick building syndrome, SBS,

2919. Wessen, B. and Schoeps, K.-O. , S. K., Wessen, B. and Schoeps, K. -., (1996), , Microbial volatile organic compounds - What substances can be found in sick buildings?
      fungi: MVOC - microbial volatile organic compound,

2920. Westberg, K. Johan Nor¨¦n, H¨ąlya Kus, (2001), , On using available environmental data in service life estimations
      environmental impacts and issues, life cycle assessment (LCA), service life prediction,

2921. White, J., (1996), , Moisture transport in walls: Canadian experience
      HAM: theory and modelling,

2922. White, J. H., (2001), , A toxic mold cleanup guide
      fungi: remediation, treatment, prevention,

2923. WHO, (2002), , Pollution-related diseases kill millions of children a year, alarming numbers part of new UN report released for child conference
      market, trend, future,

2924. Wikipedia, (2010), , Aboriginal peoples in Canada

2925. Wilkins, F., Nielsen, F. and Larsen, K., (1999), , MVOC analysis for detection of microbial growth in buildings I. Variation of MVOC and mycotoxin patterns in aspergillus versicolor
      fungi: components and products, fungi: MVOC - microbial volatile organic compound,

2926. Wilkins, K. and Abbott, S. P., (2000), , Volatile metabolite patterns for the identification of common indoor mold species
      fungi: components and products,

2927. Wilkins, K. and Larsen, K., (1995), , Variation of volatile organic compound patterns of mold species from damp buildings
      fungi: MVOC - microbial volatile organic compound,

2928. Wilkins, K., Larsen, K. and Simkus, M., (2003), , Volatile metabolites from indoor molds grown on media containing wood constituents
      fungi: MVOC - microbial volatile organic compound, wood, lumber, timber,

2929. Wilkins, K., Larsen, K. and Simkus, M., (2000), , Volatile metabolites from mold growth on building materials and synthetic media
      fungi: assessment, sampling and analysis, fungi: MVOC - microbial volatile organic compound,

2930. Willeke, K., Grinshpun, S. A., Chang, C., Juozaitis, A., Liebhaber, F., Nevalainen, A. and Thompson, M., (1992), , Inlet sampling efficiency of bioaerosol samplers
      fungi: assessment, sampling and analysis,

2931. Willeke, K., Lin, X. and Grinshpun, S. A., (1998), , Improved aerosol collection by combined impaction and centrifugal motion
      fungi: assessment, sampling and analysis,

2932. Willeke, K., Mainelis, G., Adhikari, A., Reponen, T., Grinshpun, S., Lee, S. and Cho, S., (2002), , Bioaerosol collection by a new electrostatic precipitator
      fungi: assessment, sampling and analysis,

2933. Willeke, K., Ulevicius, V., Reponen, T. and Grinshpun, S. A., (1996), , Development and evaluation of aerosol generators for biological materials
      fire, smoke, fungi: aerobiology, dispersion of spores,,

2934. Williamson, T., (2000), , R-values for timber framed building elements
      thermal analysis and performance, wood frame houses and walls, wood structure,

2935. Winandy, e., Curling, S. and Lebow, P.K., (2005), , Controlling moisture content of wood samples using a modified soil-pan decay method

2936. Winandy, J. and Morrell., J., (1993), , Relationship between incipient decay, strength, and chemical composition of Douglas-fir heartwood

2937. Winandy, J. E., (2002), , Thermal degradation of fire-retardant-treated plywood
      roof, sheathing, solar energy, radiation, thermal analysis and performance,

2938. Winandy, J. E., Curling, S. and Lebow, P. K., (2002), , Controlling wood moisture content during durability testing using the FPL soil pan decay technique
      thermal comfort,

2939. Winandy, J.E., Lebow, P.K. and Murphy, J.F, (2002), , Predicting current serviceability and residual service life of plywood roof sheathing using kinetics-based models
      roof, service life prediction, sheathing,

2940. Wirandia, J. and Lauberb, A., (2006), , Uncertainty and traceable calibration - how modern measurement concepts improve product quality in process industry

2941. Wirtanen, G., Miettinen, H. P., Enbom, S. and Vanne, L., (2002), , Clean air solutions in food processing
      ventilation - Air Infiltration and Ventilation in Buildings,

2942. Wiser, R., Barbose, G. and Peterman, C., (2008), , Tracking the Sun: The Installed Cost of Photovoltaics in the U.S. from 1998--2007

2943. WMO, (2002), , WMO statement on the status of the global climate in 2001
      climate change, global warming,

2944. WMO, (2002), , WMO Annual report 2001
      climate change, global warming, weather, climates,

2945. Wolfe, R. W., (1998), , Wind resistance of light-frame structures
      envelope, wind, wind induced pressure on building, wood frame houses and walls, wood structure,

2946. Woloszyn, M. and Rode, C., (2008), , eds. Annex 41 Final Report, Volume 1: Modelling Principles and Common Exercises
      Moisture buffering,

2947. Woloszyn, M. and Rode, C., (2008), , Tools for performance simulation of heat, air and moisture conditions of whole buildings
      Whole building HAM,

2948. Woloszyn, M., Kalamees, T., Abadie, M.O., Steeman, M. and Kalagasidis, A.S., (2009), , The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings
      IAQ - indoor air quality, ventilation: mechanical systems (HVAC),

2949. Woloszyn, M., Rusaouen, G., Duta, A., Daguse, T. and Hubert, J-L, (2000), , Moisture propagation in multizone buildings proposition of a coupled energy-moisture-airflow model
      coupled energy and airflow calculation, fungi: legal, law, litigation, insurance issues, Whole building HAM: models, Whole building HAM: theory and modeling,

2950. Wonder Makers Environmental Inc, (2004), , Give me a number! post-remediation criteria for mold cleanup
      fungi: remediation, treatment, prevention,

2951. Wong, I. L., Eames, P. C. and Perera, R. S., (2007), , A review of transparent insulation systems and the evaluation of payback period for building applications

2952. Wong, I. L., Eames, P. C. and Perera, R. S., (2007), , A review of transparent insulation systems and the evaluation of payback period for building applications

2953. Wong, J., Li, H., (2006), , Development of a conceptual model for the selection of intelligent building systems
      technology,

2954. Wong, P. W., Shimoda, Y., Nonaka, M., Inoue, M. and Mizuno, M., (2008), , Semi-transparent PV: Thermal performance, power generation, daylight modelling and energy saving potential in a residential appl
      PV/T,

2955. Wong_Wang_Sie, W., (2007), , Analysis and design of curtain wall systems for high rise buildings
      curtain wall,

2956. Wood Products Council, (2001), , Guide to wood design information, 2001-2002 edition
      building codes and standards, envelope design, market, trend, future, surveys, reviews, statistics, wood, lumber, timber,

2957. Woods, J., (2014), , Membrane processes for heating, ventilation, and air conditioning

2958. Woods, J. E., Petrisek, R. E., Granger, R. H. and Wallingford, K. M., (2000), , A procedure for evaluating the effectiveness of mold remediation
      moisture in buildings,

2959. Woods, T., (2000), , Reexamining roof ventilation
      roof, ventilation: infiltration of buildings,

2960. Worch, A., (2004), , The behaviour of vapour transfer on building material surfaces: the vapour transfer resistance
      material properties: hygrothermal,

2961. Workplace Safety and Health Division, (2001), , Guidelines for the investigation, assessment, & remediation of mould in workplaces
      fungi: assessment, sampling and analysis,

2962. World Bank, (2009), , The little green data book

2963. Wray, C. P., Matson, N. E., Sherman, M. H., (2000), , Selecting Whole-House Ventilation Strategies To Meet Proposed Ashrae Standard 62.2: Energy Cost Considerations
      energy efficiency, Standards: ASHRAE,

2964. WS Atkins Environment, (2000), , Review of the methodologies for the extraction, detection and identification of microorganisms in the environment
      fungi: assessment, sampling and analysis,

2965. WTO, (1989), , Panel Report, Canada/Japan -- Tariff on imports of Spruce, Pine, Fir (SPF) dimension lumber, adopted 19 July 1989
      wood, lumber, timber,

2966. Wu, S. and Clements-croome, D., (2007), , Understanding the indoor environment through mining sensory data--A case study
      IAQ - indoor air quality, measurement: wireless sensor network, Sensor: RH relative humidity,

2967. Wu, S., Zhang, Q., Xiao, L. and Guo, F., (2011), , A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation
      BIPV, PV/T,

2968. Wu, Y., Fazio, P. and Kumaran, M. K., (2008), , Moisture buffering capacities of five North American building materials
      Moisture buffering,

2969. Wu, Y., Kumaran, K. and Fazio, P., (2006), , Influence of air space on multi-layered material water vapor permeability measurement
      material properties: hygrothermal,

2970. Wu, Yang, (2007), , Experimental study of hygrothermal properties for building materials

2971. Wu, Z., Blomquist, G., Westermark, S. and Wang, X., (2002), , Application of PCR and probe hybridization techniques in detection of airborne fungal spores in environmental samples
      fungi: assessment, sampling and analysis,

2972. WUFI, (0), , Moisture transport in building materials - computer simulation with the WUFI model
      HAM: theory and modelling,

2973. Wullschleger, L., Manz, H. and Wakili, K. G., (2009), , Finite element analysis of temperature-induced deflection of vacuum glazing
      windows, doors, fenestration,

2974. Wurtz, E., Haghighat, F., Mora, L., Mendonca, K. C., Zhao, H., Maalouf, C. and Bourdoukan, P., (2006), , An integrated zonal model to predict transient indoor humidity distribution
      Whole building HAM,

2975. Wyrwa, J. and Marynowicz, A., (2002), , Vapour condensation and moisture accumulation in porous building wall
      condensation and evaporation, moisture in buildings,

2976. Xu, X. and Van Dessel, S., (2008), , Evaluation of an Active Building Envelope window-system
      PV/T,

2977. Yacher, J. M. and Burroughs, W., (1997), , In-depth survey report concentration of metalworking mists before and after installation of a commercial air cleaner at sauer-sundstrand company
      building subsystems: HVAC, fungi: assessment, sampling and analysis,

2978. Yacoub, S.M. and Ammar, H.H, (2002), , A methodology for architecture-level reliability risk analysis
      risk analysis,

2979. Yadav, A. K. and Chandel, S. S., (2013), , Tilt angle optimization to maximize incident solar radiation: A review

2980. Yadav, A. K. and Chandel, S. S., (2014), , Solar radiation prediction using Artificial Neural Network techniques: A review

2981. Yadav, A. S. and Bhagoria, J. L., (2013), , Heat transfer and fluid flow analysis of solar air heater: A review of CFD approach

2982. Yamanaka, T., Inoue, M. and Kaihotsu, I., (2004), , Effects of gravel mulch on water vapor transfer above and below the soil surface
      HAM: theory and modelling,

2983. Yancey, C.W., Cheok, G.S., Sadek, F., and Mohraz, B., (1998), , A summary of the structural performance of single-family, wood-frame housing
      experiments and testing, structural load of building envelope, wood frame houses and walls, wood structure,

2984. Yang, D., Gignac, M. and Bisson, M., (2004), , Sawmill evaluation of a bioprotectant against moulds, stain, and decay on green lumber

2985. Yang, L. and Li, Y., (2010), , Simple correction methods of infrared thermography for building exterior surfaces

2986. Yang, T. and Athienitis, A., (2012), , A study of design options for a building integrated photovoltaic/thermal (BIPV/T) system with glazed air collector and multiple inlets

2987. Yang, X., Chen, Q., Zeng, J. and Zhang, J. S., (2001), , A Mass transfer model for simulating volatile organic compound emissions from 'wet' coating materials applied to absorptive substrates
      VOC transport,

2988. Yao, J., (2014), , An investigation into the impact of movable solar shades on energy, indoor thermal and visual comfort improvements

2989. Yao, R., Li, B. and Liu, J., (2009), , A theoretical adaptive model of thermal comfort - Adaptive Predicted Mean Vote (aPMV)
      thermal comfort,

2990. Yasuoka, A., Tachikawa, N., Shimada, K., Kimura, S. and Oka, S., (1996), , (1-->3) beta-D-glucan as a quantitative serological marker for Pneumocystis carinii pneumonia
      fungi: components and products,

2991. Yendler, B., (1999), , Preliminary evaluation of soil moisture probe for use with Arcillite
      measurement: moisture content,

2992. Yeo, T. L., Sun, T. and Grattan, K. T. V., (2008), , Fibre-optic sensor technologies for humidity and moisture measurement

2993. Yeomans, D., (2001), , The origins of the modern curtain wall
      curtain wall,

2994. Yeung, M., A. Becker, J. Lam, H. Diniich-Ward, A. Ferguson, P. Warren, E. Simons, I. Broder, and J. Manfreda, (1995), , House dust mite allergen levels in two cities in Canada: effects of season, humidity, city and home characteristics
      fungi: molds in buildings,

2995. Yick, J., Mukherjee, B. and Ghosal, D., (2008), , Wireless sensor network survey

2996. Yin, H. M., Yang, D. J., Kelly, G. and Garant, J., (2013), , Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings

2997. Yin, R., Xu, P. and Shen, P., (2012), , Case study: Energy savings from solar window film in two commercial buildings in Shanghai

2998. Yontz, R. R., (2003), , An overview of indoor air quality
      IAQ - indoor air quality,

2999. Yoo, S., (2011), , Simulation for an optimal application of BIPV through parameter variation

3000. Yoo, S. and Manz, H., (2011), , Available remodeling simulation for a BIPV as a shading device
      BIPV,

3001. Yoon, J., Song, J. and Lee, S., (2011), , Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module
      BIPV,

3002. Yordanov, G. H., Midtg?rd, O. M. and Saetre, T. O., (2010), , Two-diode model revisited: parameters extraction from semi-log plots of i-v data

3003. Yorukoglu, M. and Celik, N., (2006), , A critical review on the estimation of daily global solar radiation from sunshine duration

3004. Yoshino, H., Mitamurab T. and Hasegawa, K., (2009), , Moisture buffering and effect of ventilation rate and volume rate of hygrothermal materials in a single room under steady state

3005. Yoshino, M., Mori, T., Mori, M., Takahashi, M., Yoshida, S. and Shirasawa, K., (1997), , Development of photovoltaic modules integrated with a metal curtain wall
      PV PV Photovoltaic,

3006. Youngquist, J. A., English, B. E., Scharmer, R. C., Chow, P. and Shook, S. R., (2000), , Literature review on use of nonwood plant fibers for building materials and panels
      surveys, reviews, statistics,

3007. Yu, L., Belousov, L., Firsov, V. A. and Shutov, A. I., (1992), , Temperature dependence of the modulus of elasticity of industrial glasses

3008. Yule, B., Roberts, S., Marshall, J. E. A. and Milton, J. A., (1998), , Quantitative spore colour measurement using colour image analysis
      fungi: spore, aerosol, measurement and instrumentation,

3009. Y¨ąreklia, K., Simseka, H. and Cemek, B., Karamana, S., (2007), , Simulating climatic variables by using stochastic approach
      weather data and issues,

3010. Yver?s, V., (2002), , Performance indicators as a tool for decisions in the building process
      design, envelope design, performance-based building codes and standards,

3011. Zalba, B., Marin, J., Cabeza, L. F. and Mehling, H., (2003), , Review on thermal energy storage with phase change: materials, heat transfer analysis and applications

3012. Zalewski, L., Lassue, S., Rousse, D. and Boukhalfa, K., (2010), , Experimental and numerical characterization of thermal bridges in prefabricated building walls

3013. Zang, H., Xu, Q. and Bian, H., (2012), , Generation of typical solar radiation data for different climates of China

3014. Zarr, R. R., Burch, D. M. and Fanney, A. H., (1995), , Heat and moisture transfer in wood-based wall construction: measured versus predicted
      experiment: hygrothermal performance, validation of models, wood, lumber, timber,

3015. Zarr, R.R., Kumaran, K. and Lagergren, E.S, (1997), , NIST/NRC-Canada interlaboratory comparison of guarded hot plate measurements: 1993-1997
      experiments and testing, thermal analysis and performance,

3016. Zhai, Z., (2006), , Application of computational fluid dynamics in building design: aspects and trends
      Indoor air movement-CFD,

3017. Zhai, Z. and Chen, Q..Y.., (0), , Impact of determination of convective heat transfer on the coupled energy and CFD simulation for buildings
      Indoor air movement-CFD,

3018. Zhai, Z. J. and Chen, Q.Y., (2006), , Sensitivity analysis and application guides for integrated building energy and CFD simulation
      simulation of building process,

3019. Zhai, Z. J., Zhang, W., Zhang, Z. and Chen, Q.Y., (0), , Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 1 -- summary o

3020. Zhai, Z., Chen, Q., Haves, P. and Klems, J. H., (2002), , On approaches to couple energy simulation and computational fluid dynamics programs
      building: simulation of building processes, CFD - computational fluid dynamics, energy,

3021. Zhai, Z.J. and Chen, Q.Y., (2005), , Performance of coupled building energy and CFD simulations
      Indoor air movement-CFD,

3022. Zhang Y., Zhou, G., Lin, K., Zhang, Q. and Di, H., (2007), , Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook
      thermal analysis and performance,

3023. Zhang, H., Yoshino, H. and Hasegawa, K., (2012), , Assessing the moisture buffering performance of hygroscopic material by using experimental method

3024. Zhang, J., (2003), , Weather-resistive barriers in stucco ladding systems
      cladding, siding, veneer, WRB weather-resistive barrier, house wrap, WRB weather-resistive barrier, house wrap,

3025. Zhang, J. S., Nong, G., Shaw, C. and Wang, J., (1999), , Measurements of volatile organic compound (VOC) emissions from wood stains using an electronic balance
      VOC, VOC transport, VOC: measurement and identification,

3026. Zhang, N. and Choi, Y., (2014), , A note on the evolution of directional distance function and its development in energy and environmental studies 1997?013

3027. Zhang, P., Ma, Z. W., Shi, X. J. and Xiao, X., (2014), , Thermal conductivity measurements of a phase change material slurry under the influence of phase change

3028. Zhang, X., Hogg, W.D. and Mekis, E., (2001), , Spatial and temporal characteristics of heavy precipitation events over Canada
      rain penetration, water intrusion,

3029. Zhang, X., Zhao, X., Smith, S., Xu, J. and Yu, X., (2011), , Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologie
      PV/T,

3030. Zhang, X., Zhao, X., Smith, S., Xu, J. and Yu, X., (2011), , Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies,
      PV/T,

3031. Zhang, Y.S. and Zhang, Y., (2007), , An Overview of Room Air Motion Measurement: Technology and Application
      tracer gas method for measuring air exchange, ventilation: measurement,

3032. Zhang, Z.H., Shen, L.Y., Love, P. E. D. and Treloar, G., (2000), , A framework for implementing ISO 14000 in construction
      construction industry, environmental impacts and issues, standards, standards: International, sustainability, environment,

3033. Zhao, B. and Li, X., Yan, Q., (2003), , A simplified system for indoor airflow simulation
      Indoor air movement-CFD,

3034. Zhao, B., Zhang, Y., Li, X., Yang, X. and Huang, D., (2004), , Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method
      IAQ: particulate, dust,,

3035. Zhao, C. Y., Lu, T. J., Hodson, H. P. and Jackson, J. D., (2004), , The temperature dependence of effective thermal conductivity of open-celled steel alloy foams

3036. Zhao, L., Zhang, Y., Wang, X. and Christianson, G. L. L. L., (1999), , Measurement of airflow patterns in ventilated spaces using particle image velocimetry
      measurement and instrumentation,

3037. Zhao, R., (2007), , Investigation of transient thermal environments
      thermal comfort,

3038. Zheng, C. w. and Pan, J., (2014), , Assessment of the global ocean wind energy resource

3039. Zhou, G., Whong, W.Z., Ong, T. and Chen, B., (2000), , Development of a fungus-specific PCR assay for detecting low-level fungi in an indoor environment
      fungi: assessment, sampling and analysis,

3040. Zhou, L. and Haghighat, F., (2009), , Optimization of ventilation system design and operation in office environment
      Indoor air movement-CFD,

3041. Zhou, X., Ouyang, Q., Lin, G. and Zhu, Y., (2006), , Impact of dynamic airflow on human thermal response
      thermal comfort,

3042. Zhu, D., (1995), , Quantitative studies driving rain exposure on a vertical building fa?ade in an urban area
      Fa?ade wetting, water runoff, soiling, Fazio's student: thesis, rain, wind driven rain,

3043. Zhu, D., Mallidi, S.R. and Fazio, P., (1995), , Approach for urban driving rain index by using climatological data recorded at suburban meteorological station
      Fa?ade wetting, water runoff, soiling, wind driven rain,

3044. Zhu, D., Mallidi, S.R. and Fazio, P., (1995), , Quantitative driving rain exposure on a vertical wall at various Canadian cities
      Fa?ade wetting, water runoff, soiling, wind driven rain,

3045. Zhu, L., Hurt, R., Correa, D. and Boehm, R., (2009), , Comprehensive energy and economic analyses on a zero energy house versus a conventional house,
      BIPV, PV/T,

3046. Zhu, Z. M. and Wang, S., (2009), , Dynamic characteristics and energy performance of buildings using phase change materials: A review

3047. Zia, P. Ahmad, S. and Leming, M., (1997), , High-Performance Concretes A State-of-Art Report (1989-1994)
      concrete,

3048. Zimmermann, D. S. G., (1998), , Development of a spray-drying technique for submerged spores of entomopathogenic fungi
      fungi: aerobiology, dispersion of spores,,

3049. Zimmermann, G., (2002), , Efficient creation of building performance simulators using automatic code generation
      simulation of building process,

3050. Zimmermann, M., Althaus, H. and Haas, A., (2005), , Benchmarks for sustainable construction - A contribution to develop a standard
      sustainability, environment,

3051. Zinzi, ., (2006), , Office worker preferences of electrochromic windows: a pilot study
      windows, doors, fenestration,

3052. Zmeureanu, R., (1987), , Computer simulation of the effect of building thermal mass on the thermal loads
      Fazio's student: thesis,

3053. Zock, J.P., Jarvis, D., Luczynska, C., Sunyer, J. and Burney, P., (2002), , Housing characteristics, reported mold exposure, and asthma in the european community respiratory health survey
      fungi: exposure investigation, fungi: health effects, fungi: moisture damaged house -- indoor microbial concentrations, fungi: molds in buildings,

3054. Zogou, O. and Stapountzis, H., (2011), , Experimental validation of an improved concept of building integrated photovoltaic panels
      BIPV, PV/T,

3055. Zogou, O. and Stapountzis, H., (2011), , Energy analysis of an improved concept of integrated PV panels in an office building in central Greece

3056. Zogou, O. and Stapountzis, H., (2012), , Flow and heat transfer inside a PV/T collector for building application
      BIPV, PV/T,

3057. Zombori, B. G., (2001), , Modeling the transient effects during the hot-pressing of wood-based composites
      wood: engineered products,

3058. Zondag, H. A., (2008), , Flat-plate PV-Thermal collectors and systems: A review
      PV/T,

3059. Zueco, J., Alhama, F. and Gonz¨˘lez-fern¨˘ndez, C. F., (2006), , Inverse determination of temperature dependent thermal conductivity using network simulation method

3060. Zwayer, G. L., (1996), , EIFS: When It Works, When It Does Not
      EIFS,

3061. Zwayer, G. L. C. and Crowe, J. P., (1998), , Leakage at interface between multiple fa?ade components
      rain penetration, water intrusion,

3062. Zygmunt, B., Jastrzebska, A. and Namiesnik, J., (2001), , Solid phase microextraction - A convenient tool for the determination of organic pollutants in environmental matrices
      measurement: SPME,